1
0
Fork 0
alistair23-linux/net/ipv4/inet_hashtables.c

666 lines
17 KiB
C
Raw Normal View History

/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Generic INET transport hashtables
*
* Authors: Lotsa people, from code originally in tcp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/random.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/vmalloc.h>
#include <net/inet_connection_sock.h>
#include <net/inet_hashtables.h>
#include <net/secure_seq.h>
#include <net/ip.h>
static u32 inet_ehashfn(const struct net *net, const __be32 laddr,
const __u16 lport, const __be32 faddr,
const __be16 fport)
{
static u32 inet_ehash_secret __read_mostly;
net_get_random_once(&inet_ehash_secret, sizeof(inet_ehash_secret));
return __inet_ehashfn(laddr, lport, faddr, fport,
inet_ehash_secret + net_hash_mix(net));
}
/* This function handles inet_sock, but also timewait and request sockets
* for IPv4/IPv6.
*/
u32 sk_ehashfn(const struct sock *sk)
{
#if IS_ENABLED(CONFIG_IPV6)
if (sk->sk_family == AF_INET6 &&
!ipv6_addr_v4mapped(&sk->sk_v6_daddr))
return inet6_ehashfn(sock_net(sk),
&sk->sk_v6_rcv_saddr, sk->sk_num,
&sk->sk_v6_daddr, sk->sk_dport);
#endif
return inet_ehashfn(sock_net(sk),
sk->sk_rcv_saddr, sk->sk_num,
sk->sk_daddr, sk->sk_dport);
}
/*
* Allocate and initialize a new local port bind bucket.
* The bindhash mutex for snum's hash chain must be held here.
*/
struct inet_bind_bucket *inet_bind_bucket_create(struct kmem_cache *cachep,
struct net *net,
struct inet_bind_hashbucket *head,
const unsigned short snum)
{
struct inet_bind_bucket *tb = kmem_cache_alloc(cachep, GFP_ATOMIC);
if (tb) {
write_pnet(&tb->ib_net, net);
tb->port = snum;
tb->fastreuse = 0;
tb->fastreuseport = 0;
inet: Allowing more than 64k connections and heavily optimize bind(0) time. With simple extension to the binding mechanism, which allows to bind more than 64k sockets (or smaller amount, depending on sysctl parameters), we have to traverse the whole bind hash table to find out empty bucket. And while it is not a problem for example for 32k connections, bind() completion time grows exponentially (since after each successful binding we have to traverse one bucket more to find empty one) even if we start each time from random offset inside the hash table. So, when hash table is full, and we want to add another socket, we have to traverse the whole table no matter what, so effectivelly this will be the worst case performance and it will be constant. Attached picture shows bind() time depending on number of already bound sockets. Green area corresponds to the usual binding to zero port process, which turns on kernel port selection as described above. Red area is the bind process, when number of reuse-bound sockets is not limited by 64k (or sysctl parameters). The same exponential growth (hidden by the green area) before number of ports reaches sysctl limit. At this time bind hash table has exactly one reuse-enbaled socket in a bucket, but it is possible that they have different addresses. Actually kernel selects the first port to try randomly, so at the beginning bind will take roughly constant time, but with time number of port to check after random start will increase. And that will have exponential growth, but because of above random selection, not every next port selection will necessary take longer time than previous. So we have to consider the area below in the graph (if you could zoom it, you could find, that there are many different times placed there), so area can hide another. Blue area corresponds to the port selection optimization. This is rather simple design approach: hashtable now maintains (unprecise and racely updated) number of currently bound sockets, and when number of such sockets becomes greater than predefined value (I use maximum port range defined by sysctls), we stop traversing the whole bind hash table and just stop at first matching bucket after random start. Above limit roughly corresponds to the case, when bind hash table is full and we turned on mechanism of allowing to bind more reuse-enabled sockets, so it does not change behaviour of other sockets. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Tested-by: Denys Fedoryschenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19 17:46:02 -07:00
tb->num_owners = 0;
INIT_HLIST_HEAD(&tb->owners);
hlist_add_head(&tb->node, &head->chain);
}
return tb;
}
/*
* Caller must hold hashbucket lock for this tb with local BH disabled
*/
void inet_bind_bucket_destroy(struct kmem_cache *cachep, struct inet_bind_bucket *tb)
{
if (hlist_empty(&tb->owners)) {
__hlist_del(&tb->node);
kmem_cache_free(cachep, tb);
}
}
void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
const unsigned short snum)
{
inet_sk(sk)->inet_num = snum;
sk_add_bind_node(sk, &tb->owners);
inet: Allowing more than 64k connections and heavily optimize bind(0) time. With simple extension to the binding mechanism, which allows to bind more than 64k sockets (or smaller amount, depending on sysctl parameters), we have to traverse the whole bind hash table to find out empty bucket. And while it is not a problem for example for 32k connections, bind() completion time grows exponentially (since after each successful binding we have to traverse one bucket more to find empty one) even if we start each time from random offset inside the hash table. So, when hash table is full, and we want to add another socket, we have to traverse the whole table no matter what, so effectivelly this will be the worst case performance and it will be constant. Attached picture shows bind() time depending on number of already bound sockets. Green area corresponds to the usual binding to zero port process, which turns on kernel port selection as described above. Red area is the bind process, when number of reuse-bound sockets is not limited by 64k (or sysctl parameters). The same exponential growth (hidden by the green area) before number of ports reaches sysctl limit. At this time bind hash table has exactly one reuse-enbaled socket in a bucket, but it is possible that they have different addresses. Actually kernel selects the first port to try randomly, so at the beginning bind will take roughly constant time, but with time number of port to check after random start will increase. And that will have exponential growth, but because of above random selection, not every next port selection will necessary take longer time than previous. So we have to consider the area below in the graph (if you could zoom it, you could find, that there are many different times placed there), so area can hide another. Blue area corresponds to the port selection optimization. This is rather simple design approach: hashtable now maintains (unprecise and racely updated) number of currently bound sockets, and when number of such sockets becomes greater than predefined value (I use maximum port range defined by sysctls), we stop traversing the whole bind hash table and just stop at first matching bucket after random start. Above limit roughly corresponds to the case, when bind hash table is full and we turned on mechanism of allowing to bind more reuse-enabled sockets, so it does not change behaviour of other sockets. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Tested-by: Denys Fedoryschenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19 17:46:02 -07:00
tb->num_owners++;
inet_csk(sk)->icsk_bind_hash = tb;
}
/*
* Get rid of any references to a local port held by the given sock.
*/
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 05:06:04 -07:00
static void __inet_put_port(struct sock *sk)
{
struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
const int bhash = inet_bhashfn(sock_net(sk), inet_sk(sk)->inet_num,
hashinfo->bhash_size);
struct inet_bind_hashbucket *head = &hashinfo->bhash[bhash];
struct inet_bind_bucket *tb;
spin_lock(&head->lock);
tb = inet_csk(sk)->icsk_bind_hash;
__sk_del_bind_node(sk);
inet: Allowing more than 64k connections and heavily optimize bind(0) time. With simple extension to the binding mechanism, which allows to bind more than 64k sockets (or smaller amount, depending on sysctl parameters), we have to traverse the whole bind hash table to find out empty bucket. And while it is not a problem for example for 32k connections, bind() completion time grows exponentially (since after each successful binding we have to traverse one bucket more to find empty one) even if we start each time from random offset inside the hash table. So, when hash table is full, and we want to add another socket, we have to traverse the whole table no matter what, so effectivelly this will be the worst case performance and it will be constant. Attached picture shows bind() time depending on number of already bound sockets. Green area corresponds to the usual binding to zero port process, which turns on kernel port selection as described above. Red area is the bind process, when number of reuse-bound sockets is not limited by 64k (or sysctl parameters). The same exponential growth (hidden by the green area) before number of ports reaches sysctl limit. At this time bind hash table has exactly one reuse-enbaled socket in a bucket, but it is possible that they have different addresses. Actually kernel selects the first port to try randomly, so at the beginning bind will take roughly constant time, but with time number of port to check after random start will increase. And that will have exponential growth, but because of above random selection, not every next port selection will necessary take longer time than previous. So we have to consider the area below in the graph (if you could zoom it, you could find, that there are many different times placed there), so area can hide another. Blue area corresponds to the port selection optimization. This is rather simple design approach: hashtable now maintains (unprecise and racely updated) number of currently bound sockets, and when number of such sockets becomes greater than predefined value (I use maximum port range defined by sysctls), we stop traversing the whole bind hash table and just stop at first matching bucket after random start. Above limit roughly corresponds to the case, when bind hash table is full and we turned on mechanism of allowing to bind more reuse-enabled sockets, so it does not change behaviour of other sockets. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Tested-by: Denys Fedoryschenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19 17:46:02 -07:00
tb->num_owners--;
inet_csk(sk)->icsk_bind_hash = NULL;
inet_sk(sk)->inet_num = 0;
inet_bind_bucket_destroy(hashinfo->bind_bucket_cachep, tb);
spin_unlock(&head->lock);
}
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 05:06:04 -07:00
void inet_put_port(struct sock *sk)
{
local_bh_disable();
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 05:06:04 -07:00
__inet_put_port(sk);
local_bh_enable();
}
EXPORT_SYMBOL(inet_put_port);
int __inet_inherit_port(const struct sock *sk, struct sock *child)
{
struct inet_hashinfo *table = sk->sk_prot->h.hashinfo;
unsigned short port = inet_sk(child)->inet_num;
const int bhash = inet_bhashfn(sock_net(sk), port,
table->bhash_size);
struct inet_bind_hashbucket *head = &table->bhash[bhash];
struct inet_bind_bucket *tb;
spin_lock(&head->lock);
tb = inet_csk(sk)->icsk_bind_hash;
if (unlikely(!tb)) {
spin_unlock(&head->lock);
return -ENOENT;
}
if (tb->port != port) {
/* NOTE: using tproxy and redirecting skbs to a proxy
* on a different listener port breaks the assumption
* that the listener socket's icsk_bind_hash is the same
* as that of the child socket. We have to look up or
* create a new bind bucket for the child here. */
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 18:06:00 -07:00
inet_bind_bucket_for_each(tb, &head->chain) {
if (net_eq(ib_net(tb), sock_net(sk)) &&
tb->port == port)
break;
}
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 18:06:00 -07:00
if (!tb) {
tb = inet_bind_bucket_create(table->bind_bucket_cachep,
sock_net(sk), head, port);
if (!tb) {
spin_unlock(&head->lock);
return -ENOMEM;
}
}
}
inet_bind_hash(child, tb, port);
spin_unlock(&head->lock);
return 0;
}
EXPORT_SYMBOL_GPL(__inet_inherit_port);
static inline int compute_score(struct sock *sk, struct net *net,
const unsigned short hnum, const __be32 daddr,
const int dif)
{
int score = -1;
struct inet_sock *inet = inet_sk(sk);
if (net_eq(sock_net(sk), net) && inet->inet_num == hnum &&
!ipv6_only_sock(sk)) {
__be32 rcv_saddr = inet->inet_rcv_saddr;
score = sk->sk_family == PF_INET ? 2 : 1;
if (rcv_saddr) {
if (rcv_saddr != daddr)
return -1;
score += 4;
}
if (sk->sk_bound_dev_if) {
if (sk->sk_bound_dev_if != dif)
return -1;
score += 4;
}
if (sk->sk_incoming_cpu == raw_smp_processor_id())
score++;
}
return score;
}
/*
* Don't inline this cruft. Here are some nice properties to exploit here. The
* BSD API does not allow a listening sock to specify the remote port nor the
* remote address for the connection. So always assume those are both
* wildcarded during the search since they can never be otherwise.
*/
struct sock *__inet_lookup_listener(struct net *net,
struct inet_hashinfo *hashinfo,
const __be32 saddr, __be16 sport,
const __be32 daddr, const unsigned short hnum,
const int dif)
{
struct sock *sk, *result;
struct hlist_nulls_node *node;
unsigned int hash = inet_lhashfn(net, hnum);
struct inet_listen_hashbucket *ilb = &hashinfo->listening_hash[hash];
int score, hiscore, matches = 0, reuseport = 0;
u32 phash = 0;
rcu_read_lock();
begin:
result = NULL;
hiscore = 0;
sk_nulls_for_each_rcu(sk, node, &ilb->head) {
score = compute_score(sk, net, hnum, daddr, dif);
if (score > hiscore) {
result = sk;
hiscore = score;
reuseport = sk->sk_reuseport;
if (reuseport) {
phash = inet_ehashfn(net, daddr, hnum,
saddr, sport);
matches = 1;
}
} else if (score == hiscore && reuseport) {
matches++;
if (reciprocal_scale(phash, matches) == 0)
result = sk;
phash = next_pseudo_random32(phash);
}
}
/*
* if the nulls value we got at the end of this lookup is
* not the expected one, we must restart lookup.
* We probably met an item that was moved to another chain.
*/
if (get_nulls_value(node) != hash + LISTENING_NULLS_BASE)
goto begin;
if (result) {
if (unlikely(!atomic_inc_not_zero(&result->sk_refcnt)))
result = NULL;
else if (unlikely(compute_score(result, net, hnum, daddr,
dif) < hiscore)) {
sock_put(result);
goto begin;
}
}
rcu_read_unlock();
return result;
}
EXPORT_SYMBOL_GPL(__inet_lookup_listener);
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
/* All sockets share common refcount, but have different destructors */
void sock_gen_put(struct sock *sk)
{
if (!atomic_dec_and_test(&sk->sk_refcnt))
return;
if (sk->sk_state == TCP_TIME_WAIT)
inet_twsk_free(inet_twsk(sk));
else if (sk->sk_state == TCP_NEW_SYN_RECV)
reqsk_free(inet_reqsk(sk));
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
else
sk_free(sk);
}
EXPORT_SYMBOL_GPL(sock_gen_put);
void sock_edemux(struct sk_buff *skb)
{
sock_gen_put(skb->sk);
}
EXPORT_SYMBOL(sock_edemux);
struct sock *__inet_lookup_established(struct net *net,
struct inet_hashinfo *hashinfo,
const __be32 saddr, const __be16 sport,
const __be32 daddr, const u16 hnum,
const int dif)
{
INET_ADDR_COOKIE(acookie, saddr, daddr);
const __portpair ports = INET_COMBINED_PORTS(sport, hnum);
struct sock *sk;
const struct hlist_nulls_node *node;
/* Optimize here for direct hit, only listening connections can
* have wildcards anyways.
*/
unsigned int hash = inet_ehashfn(net, daddr, hnum, saddr, sport);
unsigned int slot = hash & hashinfo->ehash_mask;
struct inet_ehash_bucket *head = &hashinfo->ehash[slot];
rcu_read_lock();
begin:
sk_nulls_for_each_rcu(sk, node, &head->chain) {
net: move inet_dport/inet_num in sock_common commit 68835aba4d9b (net: optimize INET input path further) moved some fields used for tcp/udp sockets lookup in the first cache line of struct sock_common. This patch moves inet_dport/inet_num as well, filling a 32bit hole on 64 bit arches and reducing number of cache line misses in lookups. Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match before addresses match, as this check is more discriminant. Remove the hash check from MATCH() macros because we dont need to re validate the hash value after taking a refcount on socket, and use likely/unlikely compiler hints, as the sk_hash/hash check makes the following conditional tests 100% predicted by cpu. Introduce skc_addrpair/skc_portpair pair values to better document the alignment requirements of the port/addr pairs used in the various MATCH() macros, and remove some casts. The namespace check can also be done at last. This slightly improves TCP/UDP lookup times. IP/TCP early demux needs inet->rx_dst_ifindex and TCP needs inet->min_ttl, lets group them together in same cache line. With help from Ben Hutchings & Joe Perches. Idea of this patch came after Ling Ma proposal to move skc_hash to the beginning of struct sock_common, and should allow him to submit a final version of his patch. My tests show an improvement doing so. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Joe Perches <joe@perches.com> Cc: Ling Ma <ling.ma.program@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 02:49:27 -07:00
if (sk->sk_hash != hash)
continue;
if (likely(INET_MATCH(sk, net, acookie,
saddr, daddr, ports, dif))) {
if (unlikely(!atomic_inc_not_zero(&sk->sk_refcnt)))
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
goto out;
net: move inet_dport/inet_num in sock_common commit 68835aba4d9b (net: optimize INET input path further) moved some fields used for tcp/udp sockets lookup in the first cache line of struct sock_common. This patch moves inet_dport/inet_num as well, filling a 32bit hole on 64 bit arches and reducing number of cache line misses in lookups. Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match before addresses match, as this check is more discriminant. Remove the hash check from MATCH() macros because we dont need to re validate the hash value after taking a refcount on socket, and use likely/unlikely compiler hints, as the sk_hash/hash check makes the following conditional tests 100% predicted by cpu. Introduce skc_addrpair/skc_portpair pair values to better document the alignment requirements of the port/addr pairs used in the various MATCH() macros, and remove some casts. The namespace check can also be done at last. This slightly improves TCP/UDP lookup times. IP/TCP early demux needs inet->rx_dst_ifindex and TCP needs inet->min_ttl, lets group them together in same cache line. With help from Ben Hutchings & Joe Perches. Idea of this patch came after Ling Ma proposal to move skc_hash to the beginning of struct sock_common, and should allow him to submit a final version of his patch. My tests show an improvement doing so. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Joe Perches <joe@perches.com> Cc: Ling Ma <ling.ma.program@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 02:49:27 -07:00
if (unlikely(!INET_MATCH(sk, net, acookie,
saddr, daddr, ports, dif))) {
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
sock_gen_put(sk);
goto begin;
}
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
goto found;
}
}
/*
* if the nulls value we got at the end of this lookup is
* not the expected one, we must restart lookup.
* We probably met an item that was moved to another chain.
*/
if (get_nulls_value(node) != slot)
goto begin;
out:
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
sk = NULL;
found:
rcu_read_unlock();
return sk;
}
EXPORT_SYMBOL_GPL(__inet_lookup_established);
/* called with local bh disabled */
static int __inet_check_established(struct inet_timewait_death_row *death_row,
struct sock *sk, __u16 lport,
struct inet_timewait_sock **twp)
{
struct inet_hashinfo *hinfo = death_row->hashinfo;
struct inet_sock *inet = inet_sk(sk);
__be32 daddr = inet->inet_rcv_saddr;
__be32 saddr = inet->inet_daddr;
int dif = sk->sk_bound_dev_if;
INET_ADDR_COOKIE(acookie, saddr, daddr);
const __portpair ports = INET_COMBINED_PORTS(inet->inet_dport, lport);
struct net *net = sock_net(sk);
unsigned int hash = inet_ehashfn(net, daddr, lport,
saddr, inet->inet_dport);
struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
spinlock_t *lock = inet_ehash_lockp(hinfo, hash);
struct sock *sk2;
const struct hlist_nulls_node *node;
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
struct inet_timewait_sock *tw = NULL;
spin_lock(lock);
sk_nulls_for_each(sk2, node, &head->chain) {
net: move inet_dport/inet_num in sock_common commit 68835aba4d9b (net: optimize INET input path further) moved some fields used for tcp/udp sockets lookup in the first cache line of struct sock_common. This patch moves inet_dport/inet_num as well, filling a 32bit hole on 64 bit arches and reducing number of cache line misses in lookups. Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match before addresses match, as this check is more discriminant. Remove the hash check from MATCH() macros because we dont need to re validate the hash value after taking a refcount on socket, and use likely/unlikely compiler hints, as the sk_hash/hash check makes the following conditional tests 100% predicted by cpu. Introduce skc_addrpair/skc_portpair pair values to better document the alignment requirements of the port/addr pairs used in the various MATCH() macros, and remove some casts. The namespace check can also be done at last. This slightly improves TCP/UDP lookup times. IP/TCP early demux needs inet->rx_dst_ifindex and TCP needs inet->min_ttl, lets group them together in same cache line. With help from Ben Hutchings & Joe Perches. Idea of this patch came after Ling Ma proposal to move skc_hash to the beginning of struct sock_common, and should allow him to submit a final version of his patch. My tests show an improvement doing so. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Joe Perches <joe@perches.com> Cc: Ling Ma <ling.ma.program@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 02:49:27 -07:00
if (sk2->sk_hash != hash)
continue;
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
net: move inet_dport/inet_num in sock_common commit 68835aba4d9b (net: optimize INET input path further) moved some fields used for tcp/udp sockets lookup in the first cache line of struct sock_common. This patch moves inet_dport/inet_num as well, filling a 32bit hole on 64 bit arches and reducing number of cache line misses in lookups. Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match before addresses match, as this check is more discriminant. Remove the hash check from MATCH() macros because we dont need to re validate the hash value after taking a refcount on socket, and use likely/unlikely compiler hints, as the sk_hash/hash check makes the following conditional tests 100% predicted by cpu. Introduce skc_addrpair/skc_portpair pair values to better document the alignment requirements of the port/addr pairs used in the various MATCH() macros, and remove some casts. The namespace check can also be done at last. This slightly improves TCP/UDP lookup times. IP/TCP early demux needs inet->rx_dst_ifindex and TCP needs inet->min_ttl, lets group them together in same cache line. With help from Ben Hutchings & Joe Perches. Idea of this patch came after Ling Ma proposal to move skc_hash to the beginning of struct sock_common, and should allow him to submit a final version of his patch. My tests show an improvement doing so. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Joe Perches <joe@perches.com> Cc: Ling Ma <ling.ma.program@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 02:49:27 -07:00
if (likely(INET_MATCH(sk2, net, acookie,
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
saddr, daddr, ports, dif))) {
if (sk2->sk_state == TCP_TIME_WAIT) {
tw = inet_twsk(sk2);
if (twsk_unique(sk, sk2, twp))
break;
}
goto not_unique;
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
}
}
/* Must record num and sport now. Otherwise we will see
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 01:22:02 -06:00
* in hash table socket with a funny identity.
*/
inet->inet_num = lport;
inet->inet_sport = htons(lport);
sk->sk_hash = hash;
WARN_ON(!sk_unhashed(sk));
__sk_nulls_add_node_rcu(sk, &head->chain);
if (tw) {
sk_nulls_del_node_init_rcu((struct sock *)tw);
NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
}
spin_unlock(lock);
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
if (twp) {
*twp = tw;
} else if (tw) {
/* Silly. Should hash-dance instead... */
inet_twsk_deschedule_put(tw);
}
return 0;
not_unique:
spin_unlock(lock);
return -EADDRNOTAVAIL;
}
static u32 inet_sk_port_offset(const struct sock *sk)
{
const struct inet_sock *inet = inet_sk(sk);
return secure_ipv4_port_ephemeral(inet->inet_rcv_saddr,
inet->inet_daddr,
inet->inet_dport);
}
/* insert a socket into ehash, and eventually remove another one
* (The another one can be a SYN_RECV or TIMEWAIT
*/
bool inet_ehash_insert(struct sock *sk, struct sock *osk)
{
struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
struct hlist_nulls_head *list;
struct inet_ehash_bucket *head;
spinlock_t *lock;
bool ret = true;
WARN_ON_ONCE(!sk_unhashed(sk));
sk->sk_hash = sk_ehashfn(sk);
head = inet_ehash_bucket(hashinfo, sk->sk_hash);
list = &head->chain;
lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
spin_lock(lock);
if (osk) {
WARN_ON_ONCE(sk->sk_hash != osk->sk_hash);
ret = sk_nulls_del_node_init_rcu(osk);
}
if (ret)
__sk_nulls_add_node_rcu(sk, list);
spin_unlock(lock);
return ret;
}
bool inet_ehash_nolisten(struct sock *sk, struct sock *osk)
{
bool ok = inet_ehash_insert(sk, osk);
if (ok) {
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
} else {
percpu_counter_inc(sk->sk_prot->orphan_count);
sk->sk_state = TCP_CLOSE;
sock_set_flag(sk, SOCK_DEAD);
inet_csk_destroy_sock(sk);
}
return ok;
}
EXPORT_SYMBOL_GPL(inet_ehash_nolisten);
void __inet_hash(struct sock *sk, struct sock *osk)
{
struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
struct inet_listen_hashbucket *ilb;
if (sk->sk_state != TCP_LISTEN) {
inet_ehash_nolisten(sk, osk);
return;
}
WARN_ON(!sk_unhashed(sk));
ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
spin_lock(&ilb->lock);
__sk_nulls_add_node_rcu(sk, &ilb->head);
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
spin_unlock(&ilb->lock);
}
EXPORT_SYMBOL(__inet_hash);
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 05:06:04 -07:00
void inet_hash(struct sock *sk)
{
if (sk->sk_state != TCP_CLOSE) {
local_bh_disable();
__inet_hash(sk, NULL);
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 05:06:04 -07:00
local_bh_enable();
}
}
EXPORT_SYMBOL_GPL(inet_hash);
void inet_unhash(struct sock *sk)
{
struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
spinlock_t *lock;
int done;
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 05:06:04 -07:00
if (sk_unhashed(sk))
return;
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 05:06:04 -07:00
if (sk->sk_state == TCP_LISTEN)
lock = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)].lock;
else
lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
spin_lock_bh(lock);
done = __sk_nulls_del_node_init_rcu(sk);
if (done)
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
spin_unlock_bh(lock);
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 05:06:04 -07:00
}
EXPORT_SYMBOL_GPL(inet_unhash);
int __inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk, u32 port_offset,
int (*check_established)(struct inet_timewait_death_row *,
struct sock *, __u16, struct inet_timewait_sock **))
{
struct inet_hashinfo *hinfo = death_row->hashinfo;
const unsigned short snum = inet_sk(sk)->inet_num;
struct inet_bind_hashbucket *head;
struct inet_bind_bucket *tb;
int ret;
struct net *net = sock_net(sk);
if (!snum) {
int i, remaining, low, high, port;
static u32 hint;
u32 offset = hint + port_offset;
struct inet_timewait_sock *tw = NULL;
inet_get_local_port_range(net, &low, &high);
remaining = (high - low) + 1;
/* By starting with offset being an even number,
* we tend to leave about 50% of ports for other uses,
* like bind(0).
*/
offset &= ~1;
local_bh_disable();
for (i = 0; i < remaining; i++) {
port = low + (i + offset) % remaining;
if (inet_is_local_reserved_port(net, port))
continue;
head = &hinfo->bhash[inet_bhashfn(net, port,
hinfo->bhash_size)];
spin_lock(&head->lock);
/* Does not bother with rcv_saddr checks,
* because the established check is already
* unique enough.
*/
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 18:06:00 -07:00
inet_bind_bucket_for_each(tb, &head->chain) {
if (net_eq(ib_net(tb), net) &&
tb->port == port) {
if (tb->fastreuse >= 0 ||
tb->fastreuseport >= 0)
goto next_port;
inet: Allowing more than 64k connections and heavily optimize bind(0) time. With simple extension to the binding mechanism, which allows to bind more than 64k sockets (or smaller amount, depending on sysctl parameters), we have to traverse the whole bind hash table to find out empty bucket. And while it is not a problem for example for 32k connections, bind() completion time grows exponentially (since after each successful binding we have to traverse one bucket more to find empty one) even if we start each time from random offset inside the hash table. So, when hash table is full, and we want to add another socket, we have to traverse the whole table no matter what, so effectivelly this will be the worst case performance and it will be constant. Attached picture shows bind() time depending on number of already bound sockets. Green area corresponds to the usual binding to zero port process, which turns on kernel port selection as described above. Red area is the bind process, when number of reuse-bound sockets is not limited by 64k (or sysctl parameters). The same exponential growth (hidden by the green area) before number of ports reaches sysctl limit. At this time bind hash table has exactly one reuse-enbaled socket in a bucket, but it is possible that they have different addresses. Actually kernel selects the first port to try randomly, so at the beginning bind will take roughly constant time, but with time number of port to check after random start will increase. And that will have exponential growth, but because of above random selection, not every next port selection will necessary take longer time than previous. So we have to consider the area below in the graph (if you could zoom it, you could find, that there are many different times placed there), so area can hide another. Blue area corresponds to the port selection optimization. This is rather simple design approach: hashtable now maintains (unprecise and racely updated) number of currently bound sockets, and when number of such sockets becomes greater than predefined value (I use maximum port range defined by sysctls), we stop traversing the whole bind hash table and just stop at first matching bucket after random start. Above limit roughly corresponds to the case, when bind hash table is full and we turned on mechanism of allowing to bind more reuse-enabled sockets, so it does not change behaviour of other sockets. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Tested-by: Denys Fedoryschenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19 17:46:02 -07:00
WARN_ON(hlist_empty(&tb->owners));
if (!check_established(death_row, sk,
port, &tw))
goto ok;
goto next_port;
}
}
tb = inet_bind_bucket_create(hinfo->bind_bucket_cachep,
net, head, port);
if (!tb) {
spin_unlock(&head->lock);
break;
}
tb->fastreuse = -1;
tb->fastreuseport = -1;
goto ok;
next_port:
spin_unlock(&head->lock);
}
local_bh_enable();
return -EADDRNOTAVAIL;
ok:
hint += (i + 2) & ~1;
/* Head lock still held and bh's disabled */
inet_bind_hash(sk, tb, port);
if (sk_unhashed(sk)) {
inet_sk(sk)->inet_sport = htons(port);
inet_ehash_nolisten(sk, (struct sock *)tw);
}
if (tw)
inet_twsk_bind_unhash(tw, hinfo);
spin_unlock(&head->lock);
if (tw)
inet_twsk_deschedule_put(tw);
ret = 0;
goto out;
}
head = &hinfo->bhash[inet_bhashfn(net, snum, hinfo->bhash_size)];
tb = inet_csk(sk)->icsk_bind_hash;
spin_lock_bh(&head->lock);
if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) {
inet_ehash_nolisten(sk, NULL);
spin_unlock_bh(&head->lock);
return 0;
} else {
spin_unlock(&head->lock);
/* No definite answer... Walk to established hash table */
ret = check_established(death_row, sk, snum, NULL);
out:
local_bh_enable();
return ret;
}
}
/*
* Bind a port for a connect operation and hash it.
*/
int inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk)
{
u32 port_offset = 0;
if (!inet_sk(sk)->inet_num)
port_offset = inet_sk_port_offset(sk);
return __inet_hash_connect(death_row, sk, port_offset,
__inet_check_established);
}
EXPORT_SYMBOL_GPL(inet_hash_connect);
void inet_hashinfo_init(struct inet_hashinfo *h)
{
int i;
for (i = 0; i < INET_LHTABLE_SIZE; i++) {
spin_lock_init(&h->listening_hash[i].lock);
INIT_HLIST_NULLS_HEAD(&h->listening_hash[i].head,
i + LISTENING_NULLS_BASE);
}
}
EXPORT_SYMBOL_GPL(inet_hashinfo_init);
int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo)
{
unsigned int locksz = sizeof(spinlock_t);
unsigned int i, nblocks = 1;
if (locksz != 0) {
/* allocate 2 cache lines or at least one spinlock per cpu */
nblocks = max(2U * L1_CACHE_BYTES / locksz, 1U);
nblocks = roundup_pow_of_two(nblocks * num_possible_cpus());
/* no more locks than number of hash buckets */
nblocks = min(nblocks, hashinfo->ehash_mask + 1);
hashinfo->ehash_locks = kmalloc_array(nblocks, locksz,
GFP_KERNEL | __GFP_NOWARN);
if (!hashinfo->ehash_locks)
hashinfo->ehash_locks = vmalloc(nblocks * locksz);
if (!hashinfo->ehash_locks)
return -ENOMEM;
for (i = 0; i < nblocks; i++)
spin_lock_init(&hashinfo->ehash_locks[i]);
}
hashinfo->ehash_locks_mask = nblocks - 1;
return 0;
}
EXPORT_SYMBOL_GPL(inet_ehash_locks_alloc);