1
0
Fork 0
alistair23-linux/drivers/edac/edac_mc_sysfs.c

1163 lines
29 KiB
C
Raw Normal View History

/*
* edac_mc kernel module
* (C) 2005-2007 Linux Networx (http://lnxi.com)
*
* This file may be distributed under the terms of the
* GNU General Public License.
*
* Written Doug Thompson <norsk5@xmission.com> www.softwarebitmaker.com
*
* (c) 2012-2013 - Mauro Carvalho Chehab
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
* The entire API were re-written, and ported to use struct device
*
*/
#include <linux/ctype.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include <linux/edac.h>
#include <linux/bug.h>
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
#include <linux/pm_runtime.h>
#include <linux/uaccess.h>
#include "edac_core.h"
#include "edac_module.h"
/* MC EDAC Controls, setable by module parameter, and sysfs */
static int edac_mc_log_ue = 1;
static int edac_mc_log_ce = 1;
static int edac_mc_panic_on_ue;
static int edac_mc_poll_msec = 1000;
/* Getter functions for above */
int edac_mc_get_log_ue(void)
{
return edac_mc_log_ue;
}
int edac_mc_get_log_ce(void)
{
return edac_mc_log_ce;
}
int edac_mc_get_panic_on_ue(void)
{
return edac_mc_panic_on_ue;
}
/* this is temporary */
int edac_mc_get_poll_msec(void)
{
return edac_mc_poll_msec;
}
static int edac_set_poll_msec(const char *val, struct kernel_param *kp)
{
unsigned long l;
int ret;
if (!val)
return -EINVAL;
ret = kstrtoul(val, 0, &l);
if (ret)
return ret;
if (l < 1000)
return -EINVAL;
*((unsigned long *)kp->arg) = l;
/* notify edac_mc engine to reset the poll period */
edac_mc_reset_delay_period(l);
return 0;
}
/* Parameter declarations for above */
module_param(edac_mc_panic_on_ue, int, 0644);
MODULE_PARM_DESC(edac_mc_panic_on_ue, "Panic on uncorrected error: 0=off 1=on");
module_param(edac_mc_log_ue, int, 0644);
MODULE_PARM_DESC(edac_mc_log_ue,
"Log uncorrectable error to console: 0=off 1=on");
module_param(edac_mc_log_ce, int, 0644);
MODULE_PARM_DESC(edac_mc_log_ce,
"Log correctable error to console: 0=off 1=on");
module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_int,
&edac_mc_poll_msec, 0644);
MODULE_PARM_DESC(edac_mc_poll_msec, "Polling period in milliseconds");
static struct device *mci_pdev;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/*
* various constants for Memory Controllers
*/
static const char * const mem_types[] = {
[MEM_EMPTY] = "Empty",
[MEM_RESERVED] = "Reserved",
[MEM_UNKNOWN] = "Unknown",
[MEM_FPM] = "FPM",
[MEM_EDO] = "EDO",
[MEM_BEDO] = "BEDO",
[MEM_SDR] = "Unbuffered-SDR",
[MEM_RDR] = "Registered-SDR",
[MEM_DDR] = "Unbuffered-DDR",
[MEM_RDDR] = "Registered-DDR",
[MEM_RMBS] = "RMBS",
[MEM_DDR2] = "Unbuffered-DDR2",
[MEM_FB_DDR2] = "FullyBuffered-DDR2",
[MEM_RDDR2] = "Registered-DDR2",
[MEM_XDR] = "XDR",
[MEM_DDR3] = "Unbuffered-DDR3",
[MEM_RDDR3] = "Registered-DDR3",
[MEM_DDR4] = "Unbuffered-DDR4",
[MEM_RDDR4] = "Registered-DDR4"
};
static const char * const dev_types[] = {
[DEV_UNKNOWN] = "Unknown",
[DEV_X1] = "x1",
[DEV_X2] = "x2",
[DEV_X4] = "x4",
[DEV_X8] = "x8",
[DEV_X16] = "x16",
[DEV_X32] = "x32",
[DEV_X64] = "x64"
};
static const char * const edac_caps[] = {
[EDAC_UNKNOWN] = "Unknown",
[EDAC_NONE] = "None",
[EDAC_RESERVED] = "Reserved",
[EDAC_PARITY] = "PARITY",
[EDAC_EC] = "EC",
[EDAC_SECDED] = "SECDED",
[EDAC_S2ECD2ED] = "S2ECD2ED",
[EDAC_S4ECD4ED] = "S4ECD4ED",
[EDAC_S8ECD8ED] = "S8ECD8ED",
[EDAC_S16ECD16ED] = "S16ECD16ED"
};
#ifdef CONFIG_EDAC_LEGACY_SYSFS
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/*
* EDAC sysfs CSROW data structures and methods
*/
#define to_csrow(k) container_of(k, struct csrow_info, dev)
/*
* We need it to avoid namespace conflicts between the legacy API
* and the per-dimm/per-rank one
*/
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
#define DEVICE_ATTR_LEGACY(_name, _mode, _show, _store) \
static struct device_attribute dev_attr_legacy_##_name = __ATTR(_name, _mode, _show, _store)
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct dev_ch_attribute {
struct device_attribute attr;
int channel;
};
#define DEVICE_CHANNEL(_name, _mode, _show, _store, _var) \
static struct dev_ch_attribute dev_attr_legacy_##_name = \
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
{ __ATTR(_name, _mode, _show, _store), (_var) }
#define to_channel(k) (container_of(k, struct dev_ch_attribute, attr)->channel)
/* Set of more default csrow<id> attribute show/store functions */
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t csrow_ue_count_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
return sprintf(data, "%u\n", csrow->ue_count);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t csrow_ce_count_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
return sprintf(data, "%u\n", csrow->ce_count);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t csrow_size_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
int i;
u32 nr_pages = 0;
for (i = 0; i < csrow->nr_channels; i++)
nr_pages += csrow->channels[i]->dimm->nr_pages;
return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages));
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t csrow_mem_type_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
return sprintf(data, "%s\n", mem_types[csrow->channels[0]->dimm->mtype]);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t csrow_dev_type_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
return sprintf(data, "%s\n", dev_types[csrow->channels[0]->dimm->dtype]);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t csrow_edac_mode_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
return sprintf(data, "%s\n", edac_caps[csrow->channels[0]->dimm->edac_mode]);
}
/* show/store functions for DIMM Label attributes */
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t channel_dimm_label_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
unsigned chan = to_channel(mattr);
struct rank_info *rank = csrow->channels[chan];
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/* if field has not been initialized, there is nothing to send */
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
if (!rank->dimm->label[0])
return 0;
return snprintf(data, EDAC_MC_LABEL_LEN, "%s\n",
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
rank->dimm->label);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t channel_dimm_label_store(struct device *dev,
struct device_attribute *mattr,
const char *data, size_t count)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
unsigned chan = to_channel(mattr);
struct rank_info *rank = csrow->channels[chan];
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
ssize_t max_size = 0;
max_size = min((ssize_t) count, (ssize_t) EDAC_MC_LABEL_LEN - 1);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
strncpy(rank->dimm->label, data, max_size);
rank->dimm->label[max_size] = '\0';
return max_size;
}
/* show function for dynamic chX_ce_count attribute */
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t channel_ce_count_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow = to_csrow(dev);
unsigned chan = to_channel(mattr);
struct rank_info *rank = csrow->channels[chan];
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
return sprintf(data, "%u\n", rank->ce_count);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/* cwrow<id>/attribute files */
DEVICE_ATTR_LEGACY(size_mb, S_IRUGO, csrow_size_show, NULL);
DEVICE_ATTR_LEGACY(dev_type, S_IRUGO, csrow_dev_type_show, NULL);
DEVICE_ATTR_LEGACY(mem_type, S_IRUGO, csrow_mem_type_show, NULL);
DEVICE_ATTR_LEGACY(edac_mode, S_IRUGO, csrow_edac_mode_show, NULL);
DEVICE_ATTR_LEGACY(ue_count, S_IRUGO, csrow_ue_count_show, NULL);
DEVICE_ATTR_LEGACY(ce_count, S_IRUGO, csrow_ce_count_show, NULL);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/* default attributes of the CSROW<id> object */
static struct attribute *csrow_attrs[] = {
&dev_attr_legacy_dev_type.attr,
&dev_attr_legacy_mem_type.attr,
&dev_attr_legacy_edac_mode.attr,
&dev_attr_legacy_size_mb.attr,
&dev_attr_legacy_ue_count.attr,
&dev_attr_legacy_ce_count.attr,
NULL,
};
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static struct attribute_group csrow_attr_grp = {
.attrs = csrow_attrs,
};
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static const struct attribute_group *csrow_attr_groups[] = {
&csrow_attr_grp,
NULL
};
static void csrow_attr_release(struct device *dev)
{
struct csrow_info *csrow = container_of(dev, struct csrow_info, dev);
edac_dbg(1, "Releasing csrow device %s\n", dev_name(dev));
kfree(csrow);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static struct device_type csrow_attr_type = {
.groups = csrow_attr_groups,
.release = csrow_attr_release,
};
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/*
* possible dynamic channel DIMM Label attribute files
*
*/
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
#define EDAC_NR_CHANNELS 6
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
DEVICE_CHANNEL(ch0_dimm_label, S_IRUGO | S_IWUSR,
channel_dimm_label_show, channel_dimm_label_store, 0);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
DEVICE_CHANNEL(ch1_dimm_label, S_IRUGO | S_IWUSR,
channel_dimm_label_show, channel_dimm_label_store, 1);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
DEVICE_CHANNEL(ch2_dimm_label, S_IRUGO | S_IWUSR,
channel_dimm_label_show, channel_dimm_label_store, 2);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
DEVICE_CHANNEL(ch3_dimm_label, S_IRUGO | S_IWUSR,
channel_dimm_label_show, channel_dimm_label_store, 3);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
DEVICE_CHANNEL(ch4_dimm_label, S_IRUGO | S_IWUSR,
channel_dimm_label_show, channel_dimm_label_store, 4);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
DEVICE_CHANNEL(ch5_dimm_label, S_IRUGO | S_IWUSR,
channel_dimm_label_show, channel_dimm_label_store, 5);
/* Total possible dynamic DIMM Label attribute file table */
static struct attribute *dynamic_csrow_dimm_attr[] = {
&dev_attr_legacy_ch0_dimm_label.attr.attr,
&dev_attr_legacy_ch1_dimm_label.attr.attr,
&dev_attr_legacy_ch2_dimm_label.attr.attr,
&dev_attr_legacy_ch3_dimm_label.attr.attr,
&dev_attr_legacy_ch4_dimm_label.attr.attr,
&dev_attr_legacy_ch5_dimm_label.attr.attr,
NULL
};
/* possible dynamic channel ce_count attribute files */
DEVICE_CHANNEL(ch0_ce_count, S_IRUGO,
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
channel_ce_count_show, NULL, 0);
DEVICE_CHANNEL(ch1_ce_count, S_IRUGO,
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
channel_ce_count_show, NULL, 1);
DEVICE_CHANNEL(ch2_ce_count, S_IRUGO,
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
channel_ce_count_show, NULL, 2);
DEVICE_CHANNEL(ch3_ce_count, S_IRUGO,
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
channel_ce_count_show, NULL, 3);
DEVICE_CHANNEL(ch4_ce_count, S_IRUGO,
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
channel_ce_count_show, NULL, 4);
DEVICE_CHANNEL(ch5_ce_count, S_IRUGO,
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
channel_ce_count_show, NULL, 5);
/* Total possible dynamic ce_count attribute file table */
static struct attribute *dynamic_csrow_ce_count_attr[] = {
&dev_attr_legacy_ch0_ce_count.attr.attr,
&dev_attr_legacy_ch1_ce_count.attr.attr,
&dev_attr_legacy_ch2_ce_count.attr.attr,
&dev_attr_legacy_ch3_ce_count.attr.attr,
&dev_attr_legacy_ch4_ce_count.attr.attr,
&dev_attr_legacy_ch5_ce_count.attr.attr,
NULL
};
static umode_t csrow_dev_is_visible(struct kobject *kobj,
struct attribute *attr, int idx)
{
struct device *dev = kobj_to_dev(kobj);
struct csrow_info *csrow = container_of(dev, struct csrow_info, dev);
if (idx >= csrow->nr_channels)
return 0;
/* Only expose populated DIMMs */
if (!csrow->channels[idx]->dimm->nr_pages)
return 0;
return attr->mode;
}
static const struct attribute_group csrow_dev_dimm_group = {
.attrs = dynamic_csrow_dimm_attr,
.is_visible = csrow_dev_is_visible,
};
static const struct attribute_group csrow_dev_ce_count_group = {
.attrs = dynamic_csrow_ce_count_attr,
.is_visible = csrow_dev_is_visible,
};
static const struct attribute_group *csrow_dev_groups[] = {
&csrow_dev_dimm_group,
&csrow_dev_ce_count_group,
NULL
};
static inline int nr_pages_per_csrow(struct csrow_info *csrow)
{
int chan, nr_pages = 0;
for (chan = 0; chan < csrow->nr_channels; chan++)
nr_pages += csrow->channels[chan]->dimm->nr_pages;
return nr_pages;
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/* Create a CSROW object under specifed edac_mc_device */
static int edac_create_csrow_object(struct mem_ctl_info *mci,
struct csrow_info *csrow, int index)
{
if (csrow->nr_channels > EDAC_NR_CHANNELS)
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
return -ENODEV;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
csrow->dev.type = &csrow_attr_type;
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 04:28:25 -06:00
csrow->dev.bus = mci->bus;
csrow->dev.groups = csrow_dev_groups;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
device_initialize(&csrow->dev);
csrow->dev.parent = &mci->dev;
csrow->mci = mci;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
dev_set_name(&csrow->dev, "csrow%d", index);
dev_set_drvdata(&csrow->dev, csrow);
edac_dbg(0, "creating (virtual) csrow node %s\n",
dev_name(&csrow->dev));
return device_add(&csrow->dev);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
}
/* Create a CSROW object under specifed edac_mc_device */
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static int edac_create_csrow_objects(struct mem_ctl_info *mci)
{
int err, i;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
for (i = 0; i < mci->nr_csrows; i++) {
csrow = mci->csrows[i];
if (!nr_pages_per_csrow(csrow))
continue;
err = edac_create_csrow_object(mci, mci->csrows[i], i);
if (err < 0) {
edac_dbg(1,
"failure: create csrow objects for csrow %d\n",
i);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
goto error;
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
}
return 0;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
error:
for (--i; i >= 0; i--) {
csrow = mci->csrows[i];
if (!nr_pages_per_csrow(csrow))
continue;
put_device(&mci->csrows[i]->dev);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
return err;
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static void edac_delete_csrow_objects(struct mem_ctl_info *mci)
{
int i;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct csrow_info *csrow;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
for (i = mci->nr_csrows - 1; i >= 0; i--) {
csrow = mci->csrows[i];
if (!nr_pages_per_csrow(csrow))
continue;
device_unregister(&mci->csrows[i]->dev);
}
}
#endif
/*
* Per-dimm (or per-rank) devices
*/
#define to_dimm(k) container_of(k, struct dimm_info, dev)
/* show/store functions for DIMM Label attributes */
static ssize_t dimmdev_location_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
struct dimm_info *dimm = to_dimm(dev);
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 07:24:43 -06:00
return edac_dimm_info_location(dimm, data, PAGE_SIZE);
}
static ssize_t dimmdev_label_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
struct dimm_info *dimm = to_dimm(dev);
/* if field has not been initialized, there is nothing to send */
if (!dimm->label[0])
return 0;
return snprintf(data, EDAC_MC_LABEL_LEN, "%s\n", dimm->label);
}
static ssize_t dimmdev_label_store(struct device *dev,
struct device_attribute *mattr,
const char *data,
size_t count)
{
struct dimm_info *dimm = to_dimm(dev);
ssize_t max_size = 0;
max_size = min((ssize_t) count, (ssize_t) EDAC_MC_LABEL_LEN - 1);
strncpy(dimm->label, data, max_size);
dimm->label[max_size] = '\0';
return max_size;
}
static ssize_t dimmdev_size_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
struct dimm_info *dimm = to_dimm(dev);
return sprintf(data, "%u\n", PAGES_TO_MiB(dimm->nr_pages));
}
static ssize_t dimmdev_mem_type_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
struct dimm_info *dimm = to_dimm(dev);
return sprintf(data, "%s\n", mem_types[dimm->mtype]);
}
static ssize_t dimmdev_dev_type_show(struct device *dev,
struct device_attribute *mattr, char *data)
{
struct dimm_info *dimm = to_dimm(dev);
return sprintf(data, "%s\n", dev_types[dimm->dtype]);
}
static ssize_t dimmdev_edac_mode_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
struct dimm_info *dimm = to_dimm(dev);
return sprintf(data, "%s\n", edac_caps[dimm->edac_mode]);
}
/* dimm/rank attribute files */
static DEVICE_ATTR(dimm_label, S_IRUGO | S_IWUSR,
dimmdev_label_show, dimmdev_label_store);
static DEVICE_ATTR(dimm_location, S_IRUGO, dimmdev_location_show, NULL);
static DEVICE_ATTR(size, S_IRUGO, dimmdev_size_show, NULL);
static DEVICE_ATTR(dimm_mem_type, S_IRUGO, dimmdev_mem_type_show, NULL);
static DEVICE_ATTR(dimm_dev_type, S_IRUGO, dimmdev_dev_type_show, NULL);
static DEVICE_ATTR(dimm_edac_mode, S_IRUGO, dimmdev_edac_mode_show, NULL);
/* attributes of the dimm<id>/rank<id> object */
static struct attribute *dimm_attrs[] = {
&dev_attr_dimm_label.attr,
&dev_attr_dimm_location.attr,
&dev_attr_size.attr,
&dev_attr_dimm_mem_type.attr,
&dev_attr_dimm_dev_type.attr,
&dev_attr_dimm_edac_mode.attr,
NULL,
};
static struct attribute_group dimm_attr_grp = {
.attrs = dimm_attrs,
};
static const struct attribute_group *dimm_attr_groups[] = {
&dimm_attr_grp,
NULL
};
static void dimm_attr_release(struct device *dev)
{
struct dimm_info *dimm = container_of(dev, struct dimm_info, dev);
edac_dbg(1, "Releasing dimm device %s\n", dev_name(dev));
kfree(dimm);
}
static struct device_type dimm_attr_type = {
.groups = dimm_attr_groups,
.release = dimm_attr_release,
};
/* Create a DIMM object under specifed memory controller device */
static int edac_create_dimm_object(struct mem_ctl_info *mci,
struct dimm_info *dimm,
int index)
{
int err;
dimm->mci = mci;
dimm->dev.type = &dimm_attr_type;
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 04:28:25 -06:00
dimm->dev.bus = mci->bus;
device_initialize(&dimm->dev);
dimm->dev.parent = &mci->dev;
if (mci->csbased)
dev_set_name(&dimm->dev, "rank%d", index);
else
dev_set_name(&dimm->dev, "dimm%d", index);
dev_set_drvdata(&dimm->dev, dimm);
pm_runtime_forbid(&mci->dev);
err = device_add(&dimm->dev);
edac_dbg(0, "creating rank/dimm device %s\n", dev_name(&dimm->dev));
return err;
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/*
* Memory controller device
*/
#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_reset_counters_store(struct device *dev,
struct device_attribute *mattr,
const char *data, size_t count)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
int cnt, row, chan, i;
edac: Initialize the dimm label with the known information While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-09 07:05:20 -07:00
mci->ue_mc = 0;
mci->ce_mc = 0;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
mci->ue_noinfo_count = 0;
mci->ce_noinfo_count = 0;
for (row = 0; row < mci->nr_csrows; row++) {
struct csrow_info *ri = mci->csrows[row];
ri->ue_count = 0;
ri->ce_count = 0;
for (chan = 0; chan < ri->nr_channels; chan++)
ri->channels[chan]->ce_count = 0;
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
cnt = 1;
for (i = 0; i < mci->n_layers; i++) {
cnt *= mci->layers[i].size;
memset(mci->ce_per_layer[i], 0, cnt * sizeof(u32));
memset(mci->ue_per_layer[i], 0, cnt * sizeof(u32));
}
mci->start_time = jiffies;
return count;
}
/* Memory scrubbing interface:
*
* A MC driver can limit the scrubbing bandwidth based on the CPU type.
* Therefore, ->set_sdram_scrub_rate should be made to return the actual
* bandwidth that is accepted or 0 when scrubbing is to be disabled.
*
* Negative value still means that an error has occurred while setting
* the scrub rate.
*/
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_sdram_scrub_rate_store(struct device *dev,
struct device_attribute *mattr,
const char *data, size_t count)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
unsigned long bandwidth = 0;
int new_bw = 0;
if (kstrtoul(data, 10, &bandwidth) < 0)
return -EINVAL;
new_bw = mci->set_sdram_scrub_rate(mci, bandwidth);
if (new_bw < 0) {
edac_printk(KERN_WARNING, EDAC_MC,
"Error setting scrub rate to: %lu\n", bandwidth);
return -EINVAL;
}
return count;
}
/*
* ->get_sdram_scrub_rate() return value semantics same as above.
*/
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_sdram_scrub_rate_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
int bandwidth = 0;
bandwidth = mci->get_sdram_scrub_rate(mci);
if (bandwidth < 0) {
edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n");
return bandwidth;
}
return sprintf(data, "%d\n", bandwidth);
}
/* default attribute files for the MCI object */
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_ue_count_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
edac: Initialize the dimm label with the known information While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-09 07:05:20 -07:00
return sprintf(data, "%d\n", mci->ue_mc);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_ce_count_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
edac: Initialize the dimm label with the known information While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-09 07:05:20 -07:00
return sprintf(data, "%d\n", mci->ce_mc);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_ce_noinfo_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
return sprintf(data, "%d\n", mci->ce_noinfo_count);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_ue_noinfo_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
return sprintf(data, "%d\n", mci->ue_noinfo_count);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_seconds_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
return sprintf(data, "%ld\n", (jiffies - mci->start_time) / HZ);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_ctl_name_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
return sprintf(data, "%s\n", mci->ctl_name);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static ssize_t mci_size_mb_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
struct mem_ctl_info *mci = to_mci(dev);
int total_pages = 0, csrow_idx, j;
for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) {
struct csrow_info *csrow = mci->csrows[csrow_idx];
for (j = 0; j < csrow->nr_channels; j++) {
struct dimm_info *dimm = csrow->channels[j]->dimm;
total_pages += dimm->nr_pages;
}
}
return sprintf(data, "%u\n", PAGES_TO_MiB(total_pages));
}
static ssize_t mci_max_location_show(struct device *dev,
struct device_attribute *mattr,
char *data)
{
struct mem_ctl_info *mci = to_mci(dev);
int i;
char *p = data;
for (i = 0; i < mci->n_layers; i++) {
p += sprintf(p, "%s %d ",
edac_layer_name[mci->layers[i].type],
mci->layers[i].size - 1);
}
return p - data;
}
#ifdef CONFIG_EDAC_DEBUG
static ssize_t edac_fake_inject_write(struct file *file,
const char __user *data,
size_t count, loff_t *ppos)
{
struct device *dev = file->private_data;
struct mem_ctl_info *mci = to_mci(dev);
static enum hw_event_mc_err_type type;
u16 errcount = mci->fake_inject_count;
if (!errcount)
errcount = 1;
type = mci->fake_inject_ue ? HW_EVENT_ERR_UNCORRECTED
: HW_EVENT_ERR_CORRECTED;
printk(KERN_DEBUG
"Generating %d %s fake error%s to %d.%d.%d to test core handling. NOTE: this won't test the driver-specific decoding logic.\n",
errcount,
(type == HW_EVENT_ERR_UNCORRECTED) ? "UE" : "CE",
errcount > 1 ? "s" : "",
mci->fake_inject_layer[0],
mci->fake_inject_layer[1],
mci->fake_inject_layer[2]
);
edac_mc_handle_error(type, mci, errcount, 0, 0, 0,
mci->fake_inject_layer[0],
mci->fake_inject_layer[1],
mci->fake_inject_layer[2],
"FAKE ERROR", "for EDAC testing only");
return count;
}
static const struct file_operations debug_fake_inject_fops = {
.open = simple_open,
.write = edac_fake_inject_write,
.llseek = generic_file_llseek,
};
#endif
/* default Control file */
static DEVICE_ATTR(reset_counters, S_IWUSR, NULL, mci_reset_counters_store);
/* default Attribute files */
static DEVICE_ATTR(mc_name, S_IRUGO, mci_ctl_name_show, NULL);
static DEVICE_ATTR(size_mb, S_IRUGO, mci_size_mb_show, NULL);
static DEVICE_ATTR(seconds_since_reset, S_IRUGO, mci_seconds_show, NULL);
static DEVICE_ATTR(ue_noinfo_count, S_IRUGO, mci_ue_noinfo_show, NULL);
static DEVICE_ATTR(ce_noinfo_count, S_IRUGO, mci_ce_noinfo_show, NULL);
static DEVICE_ATTR(ue_count, S_IRUGO, mci_ue_count_show, NULL);
static DEVICE_ATTR(ce_count, S_IRUGO, mci_ce_count_show, NULL);
static DEVICE_ATTR(max_location, S_IRUGO, mci_max_location_show, NULL);
/* memory scrubber attribute file */
DEVICE_ATTR(sdram_scrub_rate, 0, mci_sdram_scrub_rate_show,
mci_sdram_scrub_rate_store); /* umode set later in is_visible */
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static struct attribute *mci_attrs[] = {
&dev_attr_reset_counters.attr,
&dev_attr_mc_name.attr,
&dev_attr_size_mb.attr,
&dev_attr_seconds_since_reset.attr,
&dev_attr_ue_noinfo_count.attr,
&dev_attr_ce_noinfo_count.attr,
&dev_attr_ue_count.attr,
&dev_attr_ce_count.attr,
&dev_attr_max_location.attr,
&dev_attr_sdram_scrub_rate.attr,
NULL
};
static umode_t mci_attr_is_visible(struct kobject *kobj,
struct attribute *attr, int idx)
{
struct device *dev = kobj_to_dev(kobj);
struct mem_ctl_info *mci = to_mci(dev);
umode_t mode = 0;
if (attr != &dev_attr_sdram_scrub_rate.attr)
return attr->mode;
if (mci->get_sdram_scrub_rate)
mode |= S_IRUGO;
if (mci->set_sdram_scrub_rate)
mode |= S_IWUSR;
return mode;
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static struct attribute_group mci_attr_grp = {
.attrs = mci_attrs,
.is_visible = mci_attr_is_visible,
};
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static const struct attribute_group *mci_attr_groups[] = {
&mci_attr_grp,
NULL
};
static void mci_attr_release(struct device *dev)
{
struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev);
edac_dbg(1, "Releasing csrow device %s\n", dev_name(dev));
kfree(mci);
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static struct device_type mci_attr_type = {
.groups = mci_attr_groups,
.release = mci_attr_release,
};
#ifdef CONFIG_EDAC_DEBUG
static struct dentry *edac_debugfs;
int __init edac_debugfs_init(void)
{
edac_debugfs = debugfs_create_dir("edac", NULL);
if (IS_ERR(edac_debugfs)) {
edac_debugfs = NULL;
return -ENOMEM;
}
return 0;
}
void __exit edac_debugfs_exit(void)
{
debugfs_remove(edac_debugfs);
}
static int edac_create_debug_nodes(struct mem_ctl_info *mci)
{
struct dentry *d, *parent;
char name[80];
int i;
if (!edac_debugfs)
return -ENODEV;
d = debugfs_create_dir(mci->dev.kobj.name, edac_debugfs);
if (!d)
return -ENOMEM;
parent = d;
for (i = 0; i < mci->n_layers; i++) {
sprintf(name, "fake_inject_%s",
edac_layer_name[mci->layers[i].type]);
d = debugfs_create_u8(name, S_IRUGO | S_IWUSR, parent,
&mci->fake_inject_layer[i]);
if (!d)
goto nomem;
}
d = debugfs_create_bool("fake_inject_ue", S_IRUGO | S_IWUSR, parent,
&mci->fake_inject_ue);
if (!d)
goto nomem;
d = debugfs_create_u16("fake_inject_count", S_IRUGO | S_IWUSR, parent,
&mci->fake_inject_count);
if (!d)
goto nomem;
d = debugfs_create_file("fake_inject", S_IWUSR, parent,
&mci->dev,
&debug_fake_inject_fops);
if (!d)
goto nomem;
mci->debugfs = parent;
return 0;
nomem:
debugfs_remove(mci->debugfs);
return -ENOMEM;
}
#endif
/*
* Create a new Memory Controller kobject instance,
* mc<id> under the 'mc' directory
*
* Return:
* 0 Success
* !0 Failure
*/
int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
const struct attribute_group **groups)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
int i, err;
/*
* The memory controller needs its own bus, in order to avoid
* namespace conflicts at /sys/bus/edac.
*/
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 04:28:25 -06:00
mci->bus->name = kasprintf(GFP_KERNEL, "mc%d", mci->mc_idx);
if (!mci->bus->name)
return -ENOMEM;
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 04:28:25 -06:00
edac_dbg(0, "creating bus %s\n", mci->bus->name);
err = bus_register(mci->bus);
if (err < 0)
goto fail_free_name;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/* get the /sys/devices/system/edac subsys reference */
mci->dev.type = &mci_attr_type;
device_initialize(&mci->dev);
mci->dev.parent = mci_pdev;
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 04:28:25 -06:00
mci->dev.bus = mci->bus;
mci->dev.groups = groups;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
dev_set_name(&mci->dev, "mc%d", mci->mc_idx);
dev_set_drvdata(&mci->dev, mci);
pm_runtime_forbid(&mci->dev);
edac_dbg(0, "creating device %s\n", dev_name(&mci->dev));
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
err = device_add(&mci->dev);
if (err < 0) {
edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
goto fail_unregister_bus;
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/*
* Create the dimm/rank devices
*/
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
for (i = 0; i < mci->tot_dimms; i++) {
struct dimm_info *dimm = mci->dimms[i];
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
/* Only expose populated DIMMs */
if (!dimm->nr_pages)
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
continue;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
#ifdef CONFIG_EDAC_DEBUG
edac_dbg(1, "creating dimm%d, located at ", i);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
if (edac_debug_level >= 1) {
int lay;
for (lay = 0; lay < mci->n_layers; lay++)
printk(KERN_CONT "%s %d ",
edac_layer_name[mci->layers[lay].type],
dimm->location[lay]);
printk(KERN_CONT "\n");
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
#endif
err = edac_create_dimm_object(mci, dimm, i);
if (err) {
edac_dbg(1, "failure: create dimm %d obj\n", i);
goto fail_unregister_dimm;
}
}
#ifdef CONFIG_EDAC_LEGACY_SYSFS
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
err = edac_create_csrow_objects(mci);
if (err < 0)
goto fail_unregister_dimm;
#endif
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
#ifdef CONFIG_EDAC_DEBUG
edac_create_debug_nodes(mci);
#endif
return 0;
fail_unregister_dimm:
for (i--; i >= 0; i--) {
struct dimm_info *dimm = mci->dimms[i];
if (!dimm->nr_pages)
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
continue;
device_unregister(&dimm->dev);
}
device_unregister(&mci->dev);
fail_unregister_bus:
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 04:28:25 -06:00
bus_unregister(mci->bus);
fail_free_name:
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 04:28:25 -06:00
kfree(mci->bus->name);
return err;
}
/*
* remove a Memory Controller instance
*/
void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
{
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
int i;
edac_dbg(0, "\n");
#ifdef CONFIG_EDAC_DEBUG
debugfs_remove(mci->debugfs);
#endif
#ifdef CONFIG_EDAC_LEGACY_SYSFS
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
edac_delete_csrow_objects(mci);
#endif
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
for (i = 0; i < mci->tot_dimms; i++) {
struct dimm_info *dimm = mci->dimms[i];
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
if (dimm->nr_pages == 0)
continue;
edac_dbg(0, "removing device %s\n", dev_name(&dimm->dev));
device_unregister(&dimm->dev);
}
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
void edac_unregister_sysfs(struct mem_ctl_info *mci)
{
edac_dbg(1, "Unregistering device %s\n", dev_name(&mci->dev));
device_unregister(&mci->dev);
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 04:28:25 -06:00
bus_unregister(mci->bus);
kfree(mci->bus->name);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
}
static void mc_attr_release(struct device *dev)
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
{
/*
* There's no container structure here, as this is just the mci
* parent device, used to create the /sys/devices/mc sysfs node.
* So, there are no attributes on it.
*/
edac_dbg(1, "Releasing device %s\n", dev_name(dev));
kfree(dev);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
static struct device_type mc_attr_type = {
.release = mc_attr_release,
};
/*
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
* Init/exit code for the module. Basically, creates/removes /sys/class/rc
*/
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
int __init edac_mc_sysfs_init(void)
{
struct bus_type *edac_subsys;
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
int err;
/* get the /sys/devices/system/edac subsys reference */
edac_subsys = edac_get_sysfs_subsys();
if (edac_subsys == NULL) {
edac_dbg(1, "no edac_subsys\n");
err = -EINVAL;
goto out;
}
mci_pdev = kzalloc(sizeof(*mci_pdev), GFP_KERNEL);
if (!mci_pdev) {
err = -ENOMEM;
goto out_put_sysfs;
}
mci_pdev->bus = edac_subsys;
mci_pdev->type = &mc_attr_type;
device_initialize(mci_pdev);
dev_set_name(mci_pdev, "mc");
err = device_add(mci_pdev);
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
if (err < 0)
goto out_dev_free;
edac_dbg(0, "device %s created\n", dev_name(mci_pdev));
return 0;
out_dev_free:
kfree(mci_pdev);
out_put_sysfs:
edac_put_sysfs_subsys();
out:
return err;
}
edac: rewrite the sysfs code to use struct device The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-16 13:41:11 -06:00
void __exit edac_mc_sysfs_exit(void)
{
device_unregister(mci_pdev);
edac_put_sysfs_subsys();
}