redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
hifive-unleashed-5.1
Linus Torvalds 2008-12-28 12:49:40 -08:00
parent 54a696bd07 eb56092fc1
commit 0191b625ca
1395 changed files with 74317 additions and 49082 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/DocBook/Makefile
View File

@ -6,7 +6,7 @@
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml \
DOCBOOKS := z8530book.xml mcabook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \

3
Documentation/DocBook/networking.tmpl
View File

@ -98,9 +98,6 @@
X!Enet/core/wireless.c
</sect1>
-->
<sect1><title>Synchronous PPP</title>
!Edrivers/net/wan/syncppp.c
</sect1>
</chapter>
</book>

99
Documentation/DocBook/wanbook.tmpl
View File

@ -1,99 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
<book id="WANGuide">
<bookinfo>
<title>Synchronous PPP and Cisco HDLC Programming Guide</title>
<authorgroup>
<author>
<firstname>Alan</firstname>
<surname>Cox</surname>
<affiliation>
<address>
<email>alan@lxorguk.ukuu.org.uk</email>
</address>
</affiliation>
</author>
</authorgroup>
<copyright>
<year>2000</year>
<holder>Alan Cox</holder>
</copyright>
<legalnotice>
<para>
This documentation is free software; you can redistribute
it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
</para>
<para>
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc></toc>
<chapter id="intro">
<title>Introduction</title>
<para>
The syncppp drivers in Linux provide a fairly complete
implementation of Cisco HDLC and a minimal implementation of
PPP. The longer term goal is to switch the PPP layer to the
generic PPP interface that is new in Linux 2.3.x. The API should
remain unchanged when this is done, but support will then be
available for IPX, compression and other PPP features
</para>
</chapter>
<chapter id="bugs">
<title>Known Bugs And Assumptions</title>
<para>
<variablelist>
<varlistentry><term>PPP is minimal</term>
<listitem>
<para>
The current PPP implementation is very basic, although sufficient
for most wan usages.
</para>
</listitem></varlistentry>
<varlistentry><term>Cisco HDLC Quirks</term>
<listitem>
<para>
Currently we do not end all packets with the correct Cisco multicast
or unicast flags. Nothing appears to mind too much but this should
be corrected.
</para>
</listitem></varlistentry>
</variablelist>
</para>
</chapter>
<chapter id="pubfunctions">
<title>Public Functions Provided</title>
!Edrivers/net/wan/syncppp.c
</chapter>
</book>

167
Documentation/RCU/rculist_nulls.txt 100644
View File

@ -0,0 +1,167 @@
Using hlist_nulls to protect read-mostly linked lists and
objects using SLAB_DESTROY_BY_RCU allocations.
Please read the basics in Documentation/RCU/listRCU.txt
Using special makers (called 'nulls') is a convenient way
to solve following problem :
A typical RCU linked list managing objects which are
allocated with SLAB_DESTROY_BY_RCU kmem_cache can
use following algos :
1) Lookup algo
--------------
rcu_read_lock()
begin:
obj = lockless_lookup(key);
if (obj) {
if (!try_get_ref(obj)) // might fail for free objects
goto begin;
/*
* Because a writer could delete object, and a writer could
* reuse these object before the RCU grace period, we
* must check key after geting the reference on object
*/
if (obj->key != key) { // not the object we expected
put_ref(obj);
goto begin;
}
}
rcu_read_unlock();
Beware that lockless_lookup(key) cannot use traditional hlist_for_each_entry_rcu()
but a version with an additional memory barrier (smp_rmb())
lockless_lookup(key)
{
struct hlist_node *node, *next;
for (pos = rcu_dereference((head)->first);
pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) &&
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
pos = rcu_dereference(next))
if (obj->key == key)
return obj;
return NULL;
And note the traditional hlist_for_each_entry_rcu() misses this smp_rmb() :
struct hlist_node *node;
for (pos = rcu_dereference((head)->first);
pos && ({ prefetch(pos->next); 1; }) &&
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
pos = rcu_dereference(pos->next))
if (obj->key == key)
return obj;
return NULL;
}
Quoting Corey Minyard :
"If the object is moved from one list to another list in-between the
time the hash is calculated and the next field is accessed, and the
object has moved to the end of a new list, the traversal will not
complete properly on the list it should have, since the object will
be on the end of the new list and there's not a way to tell it's on a
new list and restart the list traversal. I think that this can be
solved by pre-fetching the "next" field (with proper barriers) before
checking the key."
2) Insert algo :
----------------
We need to make sure a reader cannot read the new 'obj->obj_next' value
and previous value of 'obj->key'. Or else, an item could be deleted
from a chain, and inserted into another chain. If new chain was empty
before the move, 'next' pointer is NULL, and lockless reader can
not detect it missed following items in original chain.
/*
* Please note that new inserts are done at the head of list,
* not in the middle or end.
*/
obj = kmem_cache_alloc(...);
lock_chain(); // typically a spin_lock()
obj->key = key;
atomic_inc(&obj->refcnt);
/*
* we need to make sure obj->key is updated before obj->next
*/
smp_wmb();
hlist_add_head_rcu(&obj->obj_node, list);
unlock_chain(); // typically a spin_unlock()
3) Remove algo
--------------
Nothing special here, we can use a standard RCU hlist deletion.
But thanks to SLAB_DESTROY_BY_RCU, beware a deleted object can be reused
very very fast (before the end of RCU grace period)
if (put_last_reference_on(obj) {
lock_chain(); // typically a spin_lock()
hlist_del_init_rcu(&obj->obj_node);
unlock_chain(); // typically a spin_unlock()
kmem_cache_free(cachep, obj);
}
--------------------------------------------------------------------------
With hlist_nulls we can avoid extra smp_rmb() in lockless_lookup()
and extra smp_wmb() in insert function.
For example, if we choose to store the slot number as the 'nulls'
end-of-list marker for each slot of the hash table, we can detect
a race (some writer did a delete and/or a move of an object
to another chain) checking the final 'nulls' value if
the lookup met the end of chain. If final 'nulls' value
is not the slot number, then we must restart the lookup at
the begining. If the object was moved to same chain,
then the reader doesnt care : It might eventually
scan the list again without harm.
1) lookup algo
head = &table[slot];
rcu_read_lock();
begin:
hlist_nulls_for_each_entry_rcu(obj, node, head, member) {
if (obj->key == key) {
if (!try_get_ref(obj)) // might fail for free objects
goto begin;
if (obj->key != key) { // not the object we expected
put_ref(obj);
goto begin;
}
goto out;
}
/*
* if the nulls value we got at the end of this lookup is
* not the expected one, we must restart lookup.
* We probably met an item that was moved to another chain.
*/
if (get_nulls_value(node) != slot)
goto begin;
obj = NULL;
out:
rcu_read_unlock();
2) Insert function :
--------------------
/*
* Please note that new inserts are done at the head of list,
* not in the middle or end.
*/
obj = kmem_cache_alloc(cachep);
lock_chain(); // typically a spin_lock()
obj->key = key;
atomic_set(&obj->refcnt, 1);
/*
* insert obj in RCU way (readers might be traversing chain)
*/
hlist_nulls_add_head_rcu(&obj->obj_node, list);
unlock_chain(); // typically a spin_unlock()

7
Documentation/feature-removal-schedule.txt
View File

@ -120,13 +120,6 @@ Who: Christoph Hellwig <hch@lst.de>
---------------------------
What: eepro100 network driver
When: January 2007
Why: replaced by the e100 driver
Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.

2
Documentation/networking/README.ipw2200
View File

@ -147,7 +147,7 @@ Where the supported parameter are:
driver. If disabled, the driver will not attempt to scan
for and associate to a network until it has been configured with
one or more properties for the target network, for example configuring
the network SSID. Default is 1 (auto-associate)
the network SSID. Default is 0 (do not auto-associate)
Example: % modprobe ipw2200 associate=0

68
Documentation/networking/bonding.txt
View File

@ -194,6 +194,48 @@ or, for backwards compatibility, the option value. E.g.,
The parameters are as follows:
ad_select
Specifies the 802.3ad aggregation selection logic to use. The
possible values and their effects are:
stable or 0
The active aggregator is chosen by largest aggregate
bandwidth.
Reselection of the active aggregator occurs only when all
slaves of the active aggregator are down or the active
aggregator has no slaves.
This is the default value.
bandwidth or 1
The active aggregator is chosen by largest aggregate
bandwidth. Reselection occurs if:
- A slave is added to or removed from the bond
- Any slave's link state changes
- Any slave's 802.3ad association state changes
- The bond's adminstrative state changes to up
count or 2
The active aggregator is chosen by the largest number of
ports (slaves). Reselection occurs as described under the
"bandwidth" setting, above.
The bandwidth and count selection policies permit failover of
802.3ad aggregations when partial failure of the active aggregator
occurs. This keeps the aggregator with the highest availability
(either in bandwidth or in number of ports) active at all times.
This option was added in bonding version 3.4.0.
arp_interval
Specifies the ARP link monitoring frequency in milliseconds.
@ -551,6 +593,16 @@ num_grat_arp
affects only the active-backup mode. This option was added for
bonding version 3.3.0.
num_unsol_na
Specifies the number of unsolicited IPv6 Neighbor Advertisements
to be issued after a failover event. One unsolicited NA is issued
immediately after the failover.
The valid range is 0 - 255; the default value is 1. This option
affects only the active-backup mode. This option was added for
bonding version 3.4.0.
primary
A string (eth0, eth2, etc) specifying which slave is the
@ -922,17 +974,19 @@ USERCTL=no
NETMASK, NETWORK and BROADCAST) to match your network configuration.
For later versions of initscripts, such as that found with Fedora
7 and Red Hat Enterprise Linux version 5 (or later), it is possible, and,
indeed, preferable, to specify the bonding options in the ifcfg-bond0
7 (or later) and Red Hat Enterprise Linux version 5 (or later), it is possible,
and, indeed, preferable, to specify the bonding options in the ifcfg-bond0
file, e.g. a line of the format:
BONDING_OPTS="mode=active-backup arp_interval=60 arp_ip_target=+192.168.1.254"
BONDING_OPTS="mode=active-backup arp_interval=60 arp_ip_target=192.168.1.254"
will configure the bond with the specified options. The options
specified in BONDING_OPTS are identical to the bonding module parameters
except for the arp_ip_target field. Each target should be included as a
separate option and should be preceded by a '+' to indicate it should be
added to the list of queried targets, e.g.,
except for the arp_ip_target field when using versions of initscripts older
than and 8.57 (Fedora 8) and 8.45.19 (Red Hat Enterprise Linux 5.2). When
using older versions each target should be included as a separate option and
should be preceded by a '+' to indicate it should be added to the list of
queried targets, e.g.,
arp_ip_target=+192.168.1.1 arp_ip_target=+192.168.1.2
@ -940,7 +994,7 @@ added to the list of queried targets, e.g.,
options via BONDING_OPTS, it is not necessary to edit /etc/modules.conf or
/etc/modprobe.conf.
For older versions of initscripts that do not support
For even older versions of initscripts that do not support
BONDING_OPTS, it is necessary to edit /etc/modules.conf (or
/etc/modprobe.conf, depending upon your distro) to load the bonding module
with your desired options when the bond0 interface is brought up. The

32
Documentation/networking/dccp.txt
View File

@ -57,6 +57,24 @@ can be set before calling bind().
DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
size (application payload size) in bytes, see RFC 4340, section 14.
DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs
supported by the endpoint (see include/linux/dccp.h for symbolic constants).
The caller needs to provide a sufficiently large (> 2) array of type uint8_t.
DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same
time, combining the operation of the next two socket options. This option is
preferrable over the latter two, since often applications will use the same
type of CCID for both directions; and mixed use of CCIDs is not currently well
understood. This socket option takes as argument at least one uint8_t value, or
an array of uint8_t values, which must match available CCIDS (see above). CCIDs
must be registered on the socket before calling connect() or listen().
DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets
the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID.
Please note that the getsockopt argument type here is `int', not uint8_t.
DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID.
DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold
timewait state when closing the connection (RFC 4340, 8.3). The usual case is
that the closing server sends a CloseReq, whereupon the client holds timewait
@ -115,20 +133,12 @@ retries2
importance for retransmitted acknowledgments and feature negotiation,
data packets are never retransmitted. Analogue of tcp_retries2.
send_ndp = 1
Whether or not to send NDP count options (sec. 7.7.2).
send_ackvec = 1
Whether or not to send Ack Vector options (sec. 11.5).
ack_ratio = 2
The default Ack Ratio (sec. 11.3) to use.
tx_ccid = 2
Default CCID for the sender-receiver half-connection.
Default CCID for the sender-receiver half-connection. Depending on the
choice of CCID, the Send Ack Vector feature is enabled automatically.
rx_ccid = 2
Default CCID for the receiver-sender half-connection.
Default CCID for the receiver-sender half-connection; see tx_ccid.
seq_window = 100
The initial sequence window (sec. 7.5.2).

2
Documentation/networking/driver.txt
View File

@ -13,7 +13,7 @@ Transmit path guidelines:
static int drv_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct drv *dp = dev->priv;
struct drv *dp = netdev_priv(dev);
lock_tx(dp);
...

8
Documentation/networking/generic-hdlc.txt
View File

@ -3,15 +3,15 @@ Krzysztof Halasa <khc@pm.waw.pl>
Generic HDLC layer currently supports:
1. Frame Relay (ANSI, CCITT, Cisco and no LMI).
1. Frame Relay (ANSI, CCITT, Cisco and no LMI)
- Normal (routed) and Ethernet-bridged (Ethernet device emulation)
interfaces can share a single PVC.
- ARP support (no InARP support in the kernel - there is an
experimental InARP user-space daemon available on:
http://www.kernel.org/pub/linux/utils/net/hdlc/).
2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
3. Cisco HDLC.
4. PPP (uses syncppp.c).
2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation
3. Cisco HDLC
4. PPP
5. X.25 (uses X.25 routines).
Generic HDLC is a protocol driver only - it needs a low-level driver

6
Documentation/networking/ip-sysctl.txt
View File

@ -27,6 +27,12 @@ min_adv_mss - INTEGER
The advertised MSS depends on the first hop route MTU, but will
never be lower than this setting.
rt_cache_rebuild_count - INTEGER
The per net-namespace route cache emergency rebuild threshold.
Any net-namespace having its route cache rebuilt due to
a hash bucket chain being too long more than this many times
will have its route caching disabled
IP Fragmentation:
ipfrag_high_thresh - INTEGER

9
Documentation/networking/mac80211_hwsim/README
View File

@ -50,10 +50,6 @@ associates with the AP. hostapd and wpa_supplicant are used to take
care of WPA2-PSK authentication. In addition, hostapd is also
processing access point side of association.
Please note that the current Linux kernel does not enable AP mode, so a
simple patch is needed to enable AP mode selection:
http://johannes.sipsolutions.net/patches/kernel/all/LATEST/006-allow-ap-vlan-modes.patch
# Build mac80211_hwsim as part of kernel configuration
@ -65,3 +61,8 @@ hostapd hostapd.conf
# Run wpa_supplicant (station) for wlan1
wpa_supplicant -Dwext -iwlan1 -c wpa_supplicant.conf
More test cases are available in hostap.git:
git://w1.fi/srv/git/hostap.git and mac80211_hwsim/tests subdirectory
(http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=tree;f=mac80211_hwsim/tests)

2
Documentation/networking/netdevices.txt
View File

@ -18,7 +18,7 @@ There are routines in net_init.c to handle the common cases of
alloc_etherdev, alloc_netdev. These reserve extra space for driver
private data which gets freed when the network device is freed. If
separately allocated data is attached to the network device
(dev->priv) then it is up to the module exit handler to free that.
(netdev_priv(dev)) then it is up to the module exit handler to free that.
MTU
===

22
Documentation/networking/regulatory.txt
View File

@ -131,11 +131,13 @@ are expected to do this during initialization.
r = zd_reg2alpha2(mac->regdomain, alpha2);
if (!r)
regulatory_hint(hw->wiphy, alpha2, NULL);
regulatory_hint(hw->wiphy, alpha2);
Example code - drivers providing a built in regulatory domain:
--------------------------------------------------------------
[NOTE: This API is not currently available, it can be added when required]
If you have regulatory information you can obtain from your
driver and you *need* to use this we let you build a regulatory domain
structure and pass it to the wireless core. To do this you should
@ -167,7 +169,6 @@ struct ieee80211_regdomain mydriver_jp_regdom = {
Then in some part of your code after your wiphy has been registered:
int r;
struct ieee80211_regdomain *rd;
int size_of_regd;
int num_rules = mydriver_jp_regdom.n_reg_rules;
@ -178,17 +179,12 @@ Then in some part of your code after your wiphy has been registered:
rd = kzalloc(size_of_regd, GFP_KERNEL);
if (!rd)
return -ENOMEM;
return -ENOMEM;
memcpy(rd, &mydriver_jp_regdom, sizeof(struct ieee80211_regdomain));
for (i=0; i < num_rules; i++) {
memcpy(&rd->reg_rules[i], &mydriver_jp_regdom.reg_rules[i],
sizeof(struct ieee80211_reg_rule));
}
r = regulatory_hint(hw->wiphy, NULL, rd);
if (r) {
kfree(rd);
return r;
}
for (i=0; i < num_rules; i++)
memcpy(&rd->reg_rules[i],
&mydriver_jp_regdom.reg_rules[i],
sizeof(struct ieee80211_reg_rule));
regulatory_struct_hint(rd);

12
Documentation/powerpc/dts-bindings/fsl/tsec.txt
View File

@ -2,8 +2,8 @@
The MDIO is a bus to which the PHY devices are connected. For each
device that exists on this bus, a child node should be created. See
the definition of the PHY node below for an example of how to define
a PHY.
the definition of the PHY node in booting-without-of.txt for an example
of how to define a PHY.
Required properties:
- reg : Offset and length of the register set for the device
@ -21,6 +21,14 @@ Example:
};
};
* TBI Internal MDIO bus
As of this writing, every tsec is associated with an internal TBI PHY.
This PHY is accessed through the local MDIO bus. These buses are defined
similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi".
The TBI PHYs underneath them are similar to normal PHYs, but the reg property
is considered instructive, rather than descriptive. The reg property should
be chosen so it doesn't interfere with other PHYs on the bus.
* Gianfar-compatible ethernet nodes

20
Documentation/rfkill.txt
View File

@ -191,12 +191,20 @@ Userspace input handlers (uevents) or kernel input handlers (rfkill-input):
to tell the devices registered with the rfkill class to change
their state (i.e. translates the input layer event into real
action).
* rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0
(power off all transmitters) in a special way: it ignores any
overrides and local state cache and forces all transmitters to the
RFKILL_STATE_SOFT_BLOCKED state (including those which are already
supposed to be BLOCKED). Note that the opposite event (power on all
transmitters) is handled normally.
supposed to be BLOCKED).
* rfkill EPO will remain active until rfkill-input receives an
EV_SW SW_RFKILL_ALL 1 event. While the EPO is active, transmitters
are locked in the blocked state (rfkill will refuse to unblock them).
* rfkill-input implements different policies that the user can
select for handling EV_SW SW_RFKILL_ALL 1. It will unlock rfkill,
and either do nothing (leave transmitters blocked, but now unlocked),
restore the transmitters to their state before the EPO, or unblock
them all.
Userspace uevent handler or kernel platform-specific drivers hooked to the
rfkill notifier chain:
@ -331,11 +339,9 @@ class to get a sysfs interface :-)
correct event for your switch/button. These events are emergency power-off
events when they are trying to turn the transmitters off. An example of an
input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill
switch in a laptop which is NOT a hotkey, but a real switch that kills radios
in hardware, even if the O.S. has gone to lunch. An example of an input device
which SHOULD NOT generate *_RFKILL_ALL events by default, is any sort of hot
key that does nothing by itself, as well as any hot key that is type-specific
(e.g. the one for WLAN).
switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch.
An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by
default, is any sort of hot key that is type-specific (e.g. the one for WLAN).
3.1 Guidelines for wireless device drivers

48
MAINTAINERS
View File

@ -742,7 +742,7 @@ M: jirislaby@gmail.com
P: Nick Kossifidis
M: mickflemm@gmail.com
P: Luis R. Rodriguez
M: mcgrof@gmail.com
M: lrodriguez@atheros.com
P: Bob Copeland
M: me@bobcopeland.com
L: linux-wireless@vger.kernel.org
@ -1607,11 +1607,6 @@ L: acpi4asus-user@lists.sourceforge.net
W: http://sourceforge.net/projects/acpi4asus
S: Maintained
EEPRO100 NETWORK DRIVER
P: Andrey V. Savochkin
M: saw@saw.sw.com.sg
S: Maintained
EFS FILESYSTEM
W: http://aeschi.ch.eu.org/efs/
S: Orphan
@ -1849,7 +1844,7 @@ P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
S: Supported
GENERIC HDLC DRIVER, N2, C101, PCI200SYN and WANXL DRIVERS
GENERIC HDLC (WAN) DRIVERS
P: Krzysztof Halasa
M: khc@pm.waw.pl
W: http://www.kernel.org/pub/linux/utils/net/hdlc/
@ -2248,6 +2243,11 @@ M: dan.j.williams@intel.com
L: linux-kernel@vger.kernel.org
S: Supported
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
P: Krzysztof Halasa
M: khc@pm.waw.pl
S: Maintained
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
@ -3614,16 +3614,26 @@ L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
RTL818X WIRELESS DRIVER
P: Michael Wu
M: flamingice@sourmilk.net
P: Andrea Merello
M: andreamrl@tiscali.it
RTL8180 WIRELESS DRIVER
P: John W. Linville
M: linville@tuxdriver.com
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained
RTL8187 WIRELESS DRIVER
P: Herton Ronaldo Krzesinski
M: herton@mandriva.com.br
P: Hin-Tak Leung
M htl10@users.sourceforge.net
P: Larry Finger
M: Larry.Finger@lwfinger.net
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained
S3 SAVAGE FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@gmail.com
@ -3913,6 +3923,18 @@ M: mhoffman@lightlink.com
L: lm-sensors@lm-sensors.org
S: Maintained
SMSC911x ETHERNET DRIVER
P: Steve Glendinning
M: steve.glendinning@smsc.com
L: netdev@vger.kernel.org
S: Supported
SMSC9420 PCI ETHERNET DRIVER
P: Steve Glendinning
M: steve.glendinning@smsc.com
L: netdev@vger.kernel.org
S: Supported
SMX UIO Interface
P: Ben Nizette
M: bn@niasdigital.com

9
arch/arm/mach-ixp4xx/fsg-setup.c
View File

@ -177,7 +177,6 @@ static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
static void __init fsg_init(void)
{
DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
ixp4xx_sys_init();
@ -256,10 +255,10 @@ static void __init fsg_init(void)
#endif
iounmap(f);
}
printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n",
fsg_plat_eth[0].hwaddr);
printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n",
fsg_plat_eth[1].hwaddr);
}

35
arch/arm/mach-ixp4xx/include/mach/qmgr.h
View File

@ -12,6 +12,8 @@
#include <linux/io.h>
#include <linux/kernel.h>
#define DEBUG_QMGR 0
#define HALF_QUEUES 32
#define QUEUES 64 /* only 32 lower queues currently supported */
#define MAX_QUEUE_LENGTH 4 /* in dwords */
@ -61,22 +63,51 @@ void qmgr_enable_irq(unsigned int queue);
void qmgr_disable_irq(unsigned int queue);
/* request_ and release_queue() must be called from non-IRQ context */
#if DEBUG_QMGR
extern char qmgr_queue_descs[QUEUES][32];
int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
unsigned int nearly_empty_watermark,
unsigned int nearly_full_watermark);
unsigned int nearly_full_watermark,
const char *desc_format, const char* name);
#else
int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
unsigned int nearly_empty_watermark,
unsigned int nearly_full_watermark);
#define qmgr_request_queue(queue, len, nearly_empty_watermark, \
nearly_full_watermark, desc_format, name) \
__qmgr_request_queue(queue, len, nearly_empty_watermark, \
nearly_full_watermark)
#endif
void qmgr_release_queue(unsigned int queue);
static inline void qmgr_put_entry(unsigned int queue, u32 val)
{
extern struct qmgr_regs __iomem *qmgr_regs;
#if DEBUG_QMGR
BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
printk(KERN_DEBUG "Queue %s(%i) put %X\n",
qmgr_queue_descs[queue], queue, val);
#endif
__raw_writel(val, &qmgr_regs->acc[queue][0]);
}
static inline u32 qmgr_get_entry(unsigned int queue)
{
u32 val;
extern struct qmgr_regs __iomem *qmgr_regs;
return __raw_readl(&qmgr_regs->acc[queue][0]);
val = __raw_readl(&qmgr_regs->acc[queue][0]);
#if DEBUG_QMGR
BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
printk(KERN_DEBUG "Queue %s(%i) get %X\n",
qmgr_queue_descs[queue], queue, val);
#endif
return val;
}
static inline int qmgr_get_stat1(unsigned int queue)

44
arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
View File

@ -14,8 +14,6 @@
#include <linux/module.h>
#include <mach/qmgr.h>
#define DEBUG 0
struct qmgr_regs __iomem *qmgr_regs;
static struct resource *mem_res;
static spinlock_t qmgr_lock;
@ -23,6 +21,10 @@ static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
static void (*irq_handlers[HALF_QUEUES])(void *pdev);
static void *irq_pdevs[HALF_QUEUES];
#if DEBUG_QMGR
char qmgr_queue_descs[QUEUES][32];
#endif
void qmgr_set_irq(unsigned int queue, int src,
void (*handler)(void *pdev), void *pdev)
{
@ -70,6 +72,7 @@ void qmgr_disable_irq(unsigned int queue)
spin_lock_irqsave(&qmgr_lock, flags);
__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
&qmgr_regs->irqen[0]);
__raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
spin_unlock_irqrestore(&qmgr_lock, flags);
}
@ -81,9 +84,16 @@ static inline void shift_mask(u32 *mask)
mask[0] <<= 1;
}
#if DEBUG_QMGR
int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
unsigned int nearly_empty_watermark,
unsigned int nearly_full_watermark)
unsigned int nearly_full_watermark,
const char *desc_format, const char* name)
#else
int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
unsigned int nearly_empty_watermark,
unsigned int nearly_full_watermark)
#endif
{
u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
int err;
@ -151,12 +161,13 @@ int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
used_sram_bitmap[2] |= mask[2];
used_sram_bitmap[3] |= mask[3];
__raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
spin_unlock_irq(&qmgr_lock);
#if DEBUG
printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
queue, addr);
#if DEBUG_QMGR
snprintf(qmgr_queue_descs[queue], sizeof(qmgr_queue_descs[0]),
desc_format, name);
printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n",
qmgr_queue_descs[queue], queue, addr);
#endif
spin_unlock_irq(&qmgr_lock);
return 0;
err:
@ -189,6 +200,11 @@ void qmgr_release_queue(unsigned int queue)
while (addr--)
shift_mask(mask);
#if DEBUG_QMGR
printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n",
qmgr_queue_descs[queue], queue);
qmgr_queue_descs[queue][0] = '\x0';
#endif
__raw_writel(0, &qmgr_regs->sram[queue]);
used_sram_bitmap[0] &= ~mask[0];
@ -199,9 +215,10 @@ void qmgr_release_queue(unsigned int queue)
spin_unlock_irq(&qmgr_lock);
module_put(THIS_MODULE);
#if DEBUG
printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
#endif
while ((addr = qmgr_get_entry(queue)))
printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
queue, addr);
}
static int qmgr_init(void)
@ -272,5 +289,10 @@ EXPORT_SYMBOL(qmgr_regs);
EXPORT_SYMBOL(qmgr_set_irq);
EXPORT_SYMBOL(qmgr_enable_irq);
EXPORT_SYMBOL(qmgr_disable_irq);
#if DEBUG_QMGR
EXPORT_SYMBOL(qmgr_queue_descs);
EXPORT_SYMBOL(qmgr_request_queue);
#else
EXPORT_SYMBOL(__qmgr_request_queue);
#endif
EXPORT_SYMBOL(qmgr_release_queue);

5
arch/arm/mach-ixp4xx/nas100d-setup.c
View File

@ -231,7 +231,6 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
static void __init nas100d_init(void)
{
DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
int i;
@ -294,8 +293,8 @@ static void __init nas100d_init(void)
#endif
iounmap(f);
}
printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n",
print_mac(mac_buf, nas100d_plat_eth[0].hwaddr));
printk(KERN_INFO "NAS100D: Using MAC address %pM for port 0\n",
nas100d_plat_eth[0].hwaddr);
}

5
arch/arm/mach-ixp4xx/nslu2-setup.c
View File

@ -220,7 +220,6 @@ static struct sys_timer nslu2_timer = {
static void __init nslu2_init(void)
{
DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
int i;
@ -275,8 +274,8 @@ static void __init nslu2_init(void)
#endif
iounmap(f);
}
printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n",
print_mac(mac_buf, nslu2_plat_eth[0].hwaddr));
printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n",
nslu2_plat_eth[0].hwaddr);
}

25
arch/ia64/hp/sim/simeth.c
View File

@ -167,6 +167,15 @@ netdev_read(int fd, unsigned char *buf, unsigned int len)
return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV);
}
static const struct net_device_ops simeth_netdev_ops = {
.ndo_open = simeth_open,
.ndo_stop = simeth_close,
.ndo_start_xmit = simeth_tx,
.ndo_get_stats = simeth_get_stats,
.ndo_set_multicast_list = set_multicast_list, /* not yet used */
};
/*
* Function shared with module code, so cannot be in init section
*
@ -206,14 +215,10 @@ simeth_probe1(void)
memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr));
local = dev->priv;
local = netdev_priv(dev);
local->simfd = fd; /* keep track of underlying file descriptor */
dev->open = simeth_open;
dev->stop = simeth_close;
dev->hard_start_xmit = simeth_tx;
dev->get_stats = simeth_get_stats;
dev->set_multicast_list = set_multicast_list; /* no yet used */
dev->netdev_ops = &simeth_netdev_ops;
err = register_netdev(dev);
if (err) {
@ -325,7 +330,7 @@ simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
* we get DOWN then UP.
*/
local = dev->priv;
local = netdev_priv(dev);
/* now do it for real */
r = event == NETDEV_UP ?
netdev_attach(local->simfd, dev->irq, ntohl(ifa->ifa_local)):
@ -380,7 +385,7 @@ frame_print(unsigned char *from, unsigned char *frame, int len)
static int
simeth_tx(struct sk_buff *skb, struct net_device *dev)
{
struct simeth_local *local = dev->priv;
struct simeth_local *local = netdev_priv(dev);
#if 0
/* ensure we have at least ETH_ZLEN bytes (min frame size) */
@ -443,7 +448,7 @@ simeth_rx(struct net_device *dev)
int len;
int rcv_count = SIMETH_RECV_MAX;
local = dev->priv;
local = netdev_priv(dev);
/*
* the loop concept has been borrowed from other drivers
* looks to me like it's a throttling thing to avoid pushing to many
@ -507,7 +512,7 @@ simeth_interrupt(int irq, void *dev_id)
static struct net_device_stats *
simeth_get_stats(struct net_device *dev)
{
struct simeth_local *local = dev->priv;
struct simeth_local *local = netdev_priv(dev);
return &local->stats;
}

20
arch/powerpc/boot/dts/asp834x-redboot.dts
View File

@ -199,8 +199,26 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@ -210,6 +228,7 @@
local-mac-address = [ 00 08 e5 11 32 33 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
};
@ -223,6 +242,7 @@
local-mac-address = [ 00 08 e5 11 32 34 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
};

20
arch/powerpc/boot/dts/ksi8560.dts
View File

@ -141,8 +141,26 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
device_type = "network";
model = "TSEC";
@ -152,6 +170,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&PHY1>;
};
@ -164,6 +183,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&PHY2>;
};

20
arch/powerpc/boot/dts/mpc8313erdb.dts
View File

@ -190,6 +190,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 0x8 36 0x8 35 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi0 >;
phy-handle = < &phy1 >;
fsl,magic-packet;
@ -210,6 +211,10 @@
reg = <0x4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
@ -222,9 +227,24 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <34 0x8 33 0x8 32 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi1 >;
phy-handle = < &phy4 >;
sleep = <&pmc 0x10000000>;
fsl,magic-packet;
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {

19
arch/powerpc/boot/dts/mpc8315erdb.dts
View File

@ -206,8 +206,25 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@ -217,6 +234,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = < &phy0 >;
};
@ -229,6 +247,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = < &phy1 >;
};

18
arch/powerpc/boot/dts/mpc8349emitx.dts
View File

@ -184,6 +184,22 @@
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -195,6 +211,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1c>;
linux,network-index = <0>;
};
@ -211,6 +228,7 @@
/* Vitesse 7385 isn't on the MDIO bus */
fixed-link = <1 1 1000 0 0>;
linux,network-index = <1>;
tbi-handle = <&tbi1>;
};
serial0: serial@4500 {

5
arch/powerpc/boot/dts/mpc8349emitxgp.dts
View File

@ -163,6 +163,10 @@
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -174,6 +178,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1c>;
linux,network-index = <0>;
};

19
arch/powerpc/boot/dts/mpc834x_mds.dts
View File

@ -185,8 +185,25 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@ -196,6 +213,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
};
@ -209,6 +227,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
};

19
arch/powerpc/boot/dts/mpc8377_mds.dts
View File

@ -193,8 +193,25 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@ -205,6 +222,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -218,6 +236,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
};

19
arch/powerpc/boot/dts/mpc8377_rdb.dts
View File

@ -211,8 +211,25 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@ -223,6 +240,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -237,6 +255,7 @@
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>;
};
serial0: serial@4500 {

19
arch/powerpc/boot/dts/mpc8378_mds.dts
View File

@ -232,8 +232,25 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@ -244,6 +261,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -257,6 +275,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
};

17
arch/powerpc/boot/dts/mpc8378_rdb.dts
View File

@ -211,8 +211,25 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";

18
arch/powerpc/boot/dts/mpc8379_mds.dts
View File

@ -232,6 +232,22 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -244,6 +260,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -257,6 +274,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
};

18
arch/powerpc/boot/dts/mpc8379_rdb.dts
View File

@ -211,6 +211,22 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -223,6 +239,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -237,6 +254,7 @@
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>;
};
serial0: serial@4500 {

18
arch/powerpc/boot/dts/mpc8536ds.dts
View File

@ -155,6 +155,22 @@
reg = <1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
usb@22000 {
@ -186,6 +202,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
@ -199,6 +216,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};

31
arch/powerpc/boot/dts/mpc8540ads.dts
View File

@ -150,6 +150,34 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -161,6 +189,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@ -173,6 +202,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
@ -185,6 +215,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
};

18
arch/powerpc/boot/dts/mpc8541cds.dts
View File

@ -144,6 +144,22 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -155,6 +171,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@ -167,6 +184,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};

20
arch/powerpc/boot/dts/mpc8544ds.dts
View File

@ -116,8 +116,26 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
@ -169,6 +187,7 @@
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
phy-connection-type = "rgmii-id";
};
@ -182,6 +201,7 @@
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
tbi-handle = <&tbi1>;
phy-connection-type = "rgmii-id";
};

44
arch/powerpc/boot/dts/mpc8548cds.dts
View File

@ -172,6 +172,46 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -183,6 +223,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@ -195,6 +236,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
@ -208,6 +250,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
};
@ -220,6 +263,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
};
*/

18
arch/powerpc/boot/dts/mpc8555cds.dts
View File

@ -144,6 +144,22 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -155,6 +171,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@ -167,6 +184,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};

18
arch/powerpc/boot/dts/mpc8560ads.dts
View File

@ -145,6 +145,22 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -156,6 +172,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@ -168,6 +185,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};

18
arch/powerpc/boot/dts/mpc8568mds.dts
View File

@ -179,6 +179,22 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -190,6 +206,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -202,6 +219,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
};

45
arch/powerpc/boot/dts/mpc8572ds.dts
View File

@ -225,6 +225,47 @@
interrupts = <10 1>;
reg = <0x3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -236,6 +277,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
@ -249,6 +291,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
@ -262,6 +305,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
@ -275,6 +319,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};

45
arch/powerpc/boot/dts/mpc8641_hpcn.dts
View File

@ -205,8 +205,49 @@
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@ -216,6 +257,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
@ -229,6 +271,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
@ -242,6 +285,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
@ -255,6 +299,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};

18
arch/powerpc/boot/dts/sbc8349.dts
View File

@ -177,6 +177,22 @@
reg = <0x1a>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -188,6 +204,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
};
@ -201,6 +218,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
};

18
arch/powerpc/boot/dts/sbc8548.dts
View File

@ -252,6 +252,22 @@
reg = <0x1a>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -263,6 +279,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@ -275,6 +292,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};

18
arch/powerpc/boot/dts/sbc8560.dts
View File

@ -168,6 +168,22 @@
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -179,6 +195,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@ -191,6 +208,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};

44
arch/powerpc/boot/dts/sbc8641d.dts
View File

@ -222,6 +222,46 @@
reg = <2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -233,6 +273,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
@ -246,6 +287,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
@ -259,6 +301,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
@ -272,6 +315,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};

18
arch/powerpc/boot/dts/stx_gp3_8560.dts
View File

@ -142,6 +142,22 @@
reg = <4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -153,6 +169,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -165,6 +182,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy4>;
};

28
arch/powerpc/boot/dts/tqm8540.dts
View File

@ -155,6 +155,34 @@
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {

18
arch/powerpc/boot/dts/tqm8541.dts
View File

@ -154,6 +154,22 @@
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -165,6 +181,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -177,6 +194,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};

44
arch/powerpc/boot/dts/tqm8548-bigflash.dts
View File

@ -179,6 +179,46 @@
reg = <5>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -190,6 +230,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -202,6 +243,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
@ -214,6 +256,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
};
@ -226,6 +269,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy4>;
};

44
arch/powerpc/boot/dts/tqm8548.dts
View File

@ -179,6 +179,46 @@
reg = <5>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -190,6 +230,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -202,6 +243,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
@ -214,6 +256,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
};
@ -226,6 +269,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy4>;
};

18
arch/powerpc/boot/dts/tqm8555.dts
View File

@ -154,6 +154,22 @@
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -165,6 +181,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -177,6 +194,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};

18
arch/powerpc/boot/dts/tqm8560.dts
View File

@ -156,6 +156,22 @@
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 {
@ -167,6 +183,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@ -179,6 +196,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};

247
arch/powerpc/sysdev/fsl_soc.c
View File

@ -207,236 +207,51 @@ static int __init of_add_fixed_phys(void)
arch_initcall(of_add_fixed_phys);
#endif /* CONFIG_FIXED_PHY */
static int gfar_mdio_of_init_one(struct device_node *np)
{
int k;
struct device_node *child = NULL;
struct gianfar_mdio_data mdio_data;
struct platform_device *mdio_dev;
struct resource res;
int ret;
memset(&res, 0, sizeof(res));
memset(&mdio_data, 0, sizeof(mdio_data));
ret = of_address_to_resource(np, 0, &res);
if (ret)
return ret;
/* The gianfar device will try to use the same ID created below to find
* this bus, to coordinate register access (since they share). */
mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
res.start&0xfffff, &res, 1);
if (IS_ERR(mdio_dev))
return PTR_ERR(mdio_dev);
for (k = 0; k < 32; k++)
mdio_data.irq[k] = PHY_POLL;
while ((child = of_get_next_child(np, child)) != NULL) {
int irq = irq_of_parse_and_map(child, 0);
if (irq != NO_IRQ) {
const u32 *id = of_get_property(child, "reg", NULL);
mdio_data.irq[*id] = irq;
}
}
ret = platform_device_add_data(mdio_dev, &mdio_data,
sizeof(struct gianfar_mdio_data));
if (ret)
platform_device_unregister(mdio_dev);
return ret;
}
static int __init gfar_mdio_of_init(void)
{
struct device_node *np = NULL;
for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
gfar_mdio_of_init_one(np);
/* try the deprecated version */
for_each_compatible_node(np, "mdio", "gianfar");
gfar_mdio_of_init_one(np);
return 0;
}
arch_initcall(gfar_mdio_of_init);
static const char *gfar_tx_intr = "tx";
static const char *gfar_rx_intr = "rx";
static const char *gfar_err_intr = "error";
static int __init gfar_of_init(void)
#ifdef CONFIG_PPC_83xx
static int __init mpc83xx_wdt_init(void)
{
struct resource r;
struct device_node *np;
unsigned int i;
struct platform_device *gfar_dev;
struct resource res;
struct platform_device *dev;
u32 freq = fsl_get_sys_freq();
int ret;
for (np = NULL, i = 0;
(np = of_find_compatible_node(np, "network", "gianfar")) != NULL;
i++) {
struct resource r[4];
struct device_node *phy, *mdio;
struct gianfar_platform_data gfar_data;
const unsigned int *id;
const char *model;
const char *ctype;
const void *mac_addr;
const phandle *ph;
int n_res = 2;
np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
if (!of_device_is_available(np))
continue;
memset(r, 0, sizeof(r));
memset(&gfar_data, 0, sizeof(gfar_data));
ret = of_address_to_resource(np, 0, &r[0]);
if (ret)
goto err;
of_irq_to_resource(np, 0, &r[1]);
model = of_get_property(np, "model", NULL);
/* If we aren't the FEC we have multiple interrupts */
if (model && strcasecmp(model, "FEC")) {
r[1].name = gfar_tx_intr;
r[2].name = gfar_rx_intr;
of_irq_to_resource(np, 1, &r[2]);
r[3].name = gfar_err_intr;
of_irq_to_resource(np, 2, &r[3]);
n_res += 2;
}
gfar_dev =
platform_device_register_simple("fsl-gianfar", i, &r[0],
n_res);
if (IS_ERR(gfar_dev)) {
ret = PTR_ERR(gfar_dev);
goto err;
}
mac_addr = of_get_mac_address(np);
if (mac_addr)
memcpy(gfar_data.mac_addr, mac_addr, 6);
if (model && !strcasecmp(model, "TSEC"))
gfar_data.device_flags =
FSL_GIANFAR_DEV_HAS_GIGABIT |
FSL_GIANFAR_DEV_HAS_COALESCE |
FSL_GIANFAR_DEV_HAS_RMON |
FSL_GIANFAR_DEV_HAS_MULTI_INTR;
if (model && !strcasecmp(model, "eTSEC"))
gfar_data.device_flags =
FSL_GIANFAR_DEV_HAS_GIGABIT |
FSL_GIANFAR_DEV_HAS_COALESCE |
FSL_GIANFAR_DEV_HAS_RMON |
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM |
FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH;
ctype = of_get_property(np, "phy-connection-type", NULL);
/* We only care about rgmii-id. The rest are autodetected */
if (ctype && !strcmp(ctype, "rgmii-id"))
gfar_data.interface = PHY_INTERFACE_MODE_RGMII_ID;
else
gfar_data.interface = PHY_INTERFACE_MODE_MII;
if (of_get_property(np, "fsl,magic-packet", NULL))
gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
ph = of_get_property(np, "phy-handle", NULL);
if (ph == NULL) {
u32 *fixed_link;
fixed_link = (u32 *)of_get_property(np, "fixed-link",
NULL);
if (!fixed_link) {
ret = -ENODEV;
goto unreg;
}
snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0");
gfar_data.phy_id = fixed_link[0];
} else {
phy = of_find_node_by_phandle(*ph);
if (phy == NULL) {
ret = -ENODEV;
goto unreg;
}
mdio = of_get_parent(phy);
id = of_get_property(phy, "reg", NULL);
ret = of_address_to_resource(mdio, 0, &res);
if (ret) {
of_node_put(phy);
of_node_put(mdio);
goto unreg;
}
gfar_data.phy_id = *id;
snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
(unsigned long long)res.start&0xfffff);
of_node_put(phy);
of_node_put(mdio);
}
/* Get MDIO bus controlled by this eTSEC, if any. Normally only
* eTSEC 1 will control an MDIO bus, not necessarily the same
* bus that its PHY is on ('mdio' above), so we can't just use
* that. What we do is look for a gianfar mdio device that has
* overlapping registers with this device. That's really the
* whole point, to find the device sharing our registers to
* coordinate access with it.
*/
for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") {
if (of_address_to_resource(mdio, 0, &res))
continue;
if (res.start >= r[0].start && res.end <= r[0].end) {
/* Get the ID the mdio bus platform device was
* registered with. gfar_data.bus_id is
* different because it's for finding a PHY,
* while this is for finding a MII bus.
*/
gfar_data.mdio_bus = res.start&0xfffff;
of_node_put(mdio);
break;
}
}
ret =
platform_device_add_data(gfar_dev, &gfar_data,
sizeof(struct
gianfar_platform_data));
if (ret)
goto unreg;
if (!np) {
ret = -ENODEV;
goto nodev;
}
memset(&r, 0, sizeof(r));
ret = of_address_to_resource(np, 0, &r);
if (ret)
goto err;
dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
if (IS_ERR(dev)) {
ret = PTR_ERR(dev);
goto err;
}
ret = platform_device_add_data(dev, &freq, sizeof(freq));
if (ret)
goto unreg;
of_node_put(np);
return 0;
unreg:
platform_device_unregister(gfar_dev);
platform_device_unregister(dev);
err:
of_node_put(np);
nodev:
return ret;
}
arch_initcall(gfar_of_init);
arch_initcall(mpc83xx_wdt_init);
#endif
static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
{

4
arch/s390/appldata/appldata_net_sum.c
View File

@ -67,7 +67,6 @@ static void appldata_get_net_sum_data(void *data)
int i;
struct appldata_net_sum_data *net_data;
struct net_device *dev;
struct net_device_stats *stats;
unsigned long rx_packets, tx_packets, rx_bytes, tx_bytes, rx_errors,
tx_errors, rx_dropped, tx_dropped, collisions;
@ -86,7 +85,8 @@ static void appldata_get_net_sum_data(void *data)
collisions = 0;
read_lock(&dev_base_lock);
for_each_netdev(&init_net, dev) {
stats = dev->get_stats(dev);
const struct net_device_stats *stats = dev_get_stats(dev);
rx_packets += stats->rx_packets;
tx_packets += stats->tx_packets;
rx_bytes += stats->rx_bytes;

5
arch/sparc64/kernel/idprom.c
View File

@ -42,8 +42,5 @@ void __init idprom_init(void)
idprom->id_cksum, calc_idprom_cksum(idprom));
}
printk("Ethernet address: %02x:%02x:%02x:%02x:%02x:%02x\n",
idprom->id_ethaddr[0], idprom->id_ethaddr[1],
idprom->id_ethaddr[2], idprom->id_ethaddr[3],
idprom->id_ethaddr[4], idprom->id_ethaddr[5]);
printk("Ethernet address: %pM\n", idprom->id_ethaddr);
}

2
arch/um/drivers/daemon_kern.c
View File

@ -22,7 +22,7 @@ static void daemon_init(struct net_device *dev, void *data)
struct daemon_data *dpri;
struct daemon_init *init = data;
pri = dev->priv;
pri = netdev_priv(dev);
dpri = (struct daemon_data *) pri->user;
dpri->sock_type = init->sock_type;
dpri->ctl_sock = init->ctl_sock;

2
arch/um/drivers/mcast_kern.c
View File

@ -28,7 +28,7 @@ static void mcast_init(struct net_device *dev, void *data)
struct mcast_data *dpri;
struct mcast_init *init = data;
pri = dev->priv;
pri = netdev_priv(dev);
dpri = (struct mcast_data *) pri->user;
dpri->addr = init->addr;
dpri->port = init->port;

29
arch/um/drivers/net_kern.c
View File

@ -76,7 +76,7 @@ out:
static int uml_net_rx(struct net_device *dev)
{
struct uml_net_private *lp = dev->priv;
struct uml_net_private *lp = netdev_priv(dev);
int pkt_len;
struct sk_buff *skb;
@ -119,7 +119,7 @@ static void uml_dev_close(struct work_struct *work)
static irqreturn_t uml_net_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct uml_net_private *lp = dev->priv;
struct uml_net_private *lp = netdev_priv(dev);
int err;
if (!netif_running(dev))
@ -150,7 +150,7 @@ out:
static int uml_net_open(struct net_device *dev)
{
struct uml_net_private *lp = dev->priv;
struct uml_net_private *lp = netdev_priv(dev);
int err;
if (lp->fd >= 0) {
@ -195,7 +195,7 @@ out:
static int uml_net_close(struct net_device *dev)
{
struct uml_net_private *lp = dev->priv;
struct uml_net_private *lp = netdev_priv(dev);
netif_stop_queue(dev);
@ -213,7 +213,7 @@ static int uml_net_close(struct net_device *dev)
static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct uml_net_private *lp = dev->priv;
struct uml_net_private *lp = netdev_priv(dev);
unsigned long flags;
int len;
@ -250,7 +250,7 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
static struct net_device_stats *uml_net_get_stats(struct net_device *dev)
{
struct uml_net_private *lp = dev->priv;
struct uml_net_private *lp = netdev_priv(dev);
return &lp->stats;
}
@ -267,7 +267,7 @@ static void uml_net_tx_timeout(struct net_device *dev)
static int uml_net_set_mac(struct net_device *dev, void *addr)
{
struct uml_net_private *lp = dev->priv;
struct uml_net_private *lp = netdev_priv(dev);
struct sockaddr *hwaddr = addr;
spin_lock_irq(&lp->lock);
@ -368,7 +368,7 @@ static void net_device_release(struct device *dev)
{
struct uml_net *device = dev->driver_data;
struct net_device *netdev = device->dev;
struct uml_net_private *lp = netdev->priv;
struct uml_net_private *lp = netdev_priv(netdev);
if (lp->remove != NULL)
(*lp->remove)(&lp->user);
@ -418,14 +418,9 @@ static void eth_configure(int n, void *init, char *mac,
setup_etheraddr(mac, device->mac, dev->name);
printk(KERN_INFO "Netdevice %d ", n);
printk("(%02x:%02x:%02x:%02x:%02x:%02x) ",
device->mac[0], device->mac[1],
device->mac[2], device->mac[3],
device->mac[4], device->mac[5]);
printk(": ");
printk(KERN_INFO "Netdevice %d (%pM) : ", n, device->mac);
lp = dev->priv;
lp = netdev_priv(dev);
/* This points to the transport private data. It's still clear, but we
* must memset it to 0 *now*. Let's help the drivers. */
memset(lp, 0, size);
@ -735,7 +730,7 @@ static int net_remove(int n, char **error_out)
return -ENODEV;
dev = device->dev;
lp = dev->priv;
lp = netdev_priv(dev);
if (lp->fd > 0)
return -EBUSY;
unregister_netdev(dev);
@ -766,7 +761,7 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event,
if (dev->open != uml_net_open)
return NOTIFY_DONE;
lp = dev->priv;
lp = netdev_priv(dev);
proc = NULL;
switch (event) {

2
arch/um/drivers/pcap_kern.c
View File

@ -21,7 +21,7 @@ void pcap_init(struct net_device *dev, void *data)
struct pcap_data *ppri;
struct pcap_init *init = data;
pri = dev->priv;
pri = netdev_priv(dev);
ppri = (struct pcap_data *) pri->user;
ppri->host_if = init->host_if;
ppri->promisc = init->promisc;

2
arch/um/drivers/slip_kern.c
View File

@ -19,7 +19,7 @@ static void slip_init(struct net_device *dev, void *data)
struct slip_data *spri;
struct slip_init *init = data;
private = dev->priv;
private = netdev_priv(dev);
spri = (struct slip_data *) private->user;
memset(spri->name, 0, sizeof(spri->name));

2
arch/um/drivers/slirp_kern.c
View File

@ -22,7 +22,7 @@ void slirp_init(struct net_device *dev, void *data)
struct slirp_init *init = data;
int i;
private = dev->priv;
private = netdev_priv(dev);
spri = (struct slirp_data *) private->user;
spri->argw = init->argw;

2
arch/um/drivers/vde_kern.c
View File

@ -19,7 +19,7 @@ static void vde_init(struct net_device *dev, void *data)
struct uml_net_private *pri;
struct vde_data *vpri;
pri = dev->priv;
pri = netdev_priv(dev);
vpri = (struct vde_data *) pri->user;
vpri->vde_switch = init->vde_switch;

2
arch/um/os-Linux/drivers/ethertap_kern.c
View File

@ -22,7 +22,7 @@ static void etap_init(struct net_device *dev, void *data)
struct ethertap_data *epri;
struct ethertap_init *init = data;
pri = dev->priv;
pri = netdev_priv(dev);
epri = (struct ethertap_data *) pri->user;
epri->dev_name = init->dev_name;
epri->gate_addr = init->gate_addr;

2
arch/um/os-Linux/drivers/tuntap_kern.c
View File

@ -21,7 +21,7 @@ static void tuntap_init(struct net_device *dev, void *data)
struct tuntap_data *tpri;
struct tuntap_init *init = data;
pri = dev->priv;
pri = netdev_priv(dev);
tpri = (struct tuntap_data *) pri->user;
tpri->dev_name = init->dev_name;
tpri->fixed_config = (init->dev_name != NULL);

21
arch/xtensa/platforms/iss/network.c
View File

@ -365,7 +365,7 @@ static int tuntap_probe(struct iss_net_private *lp, int index, char *init)
static int iss_net_rx(struct net_device *dev)
{
struct iss_net_private *lp = dev->priv;
struct iss_net_private *lp = netdev_priv(dev);
int pkt_len;
struct sk_buff *skb;
@ -456,7 +456,7 @@ static void iss_net_timer(unsigned long priv)
static int iss_net_open(struct net_device *dev)
{
struct iss_net_private *lp = dev->priv;
struct iss_net_private *lp = netdev_priv(dev);
char addr[sizeof "255.255.255.255\0"];
int err;
@ -496,7 +496,7 @@ out:
static int iss_net_close(struct net_device *dev)
{
struct iss_net_private *lp = dev->priv;
struct iss_net_private *lp = netdev_priv(dev);
printk("iss_net_close!\n");
netif_stop_queue(dev);
spin_lock(&lp->lock);
@ -515,7 +515,7 @@ printk("iss_net_close!\n");
static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct iss_net_private *lp = dev->priv;
struct iss_net_private *lp = netdev_priv(dev);
unsigned long flags;
int len;
@ -551,7 +551,7 @@ static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
static struct net_device_stats *iss_net_get_stats(struct net_device *dev)
{
struct iss_net_private *lp = dev->priv;
struct iss_net_private *lp = netdev_priv(dev);
return &lp->stats;
}
@ -578,7 +578,7 @@ static void iss_net_tx_timeout(struct net_device *dev)
static int iss_net_set_mac(struct net_device *dev, void *addr)
{
#if 0
struct iss_net_private *lp = dev->priv;
struct iss_net_private *lp = netdev_priv(dev);
struct sockaddr *hwaddr = addr;
spin_lock(&lp->lock);
@ -592,7 +592,7 @@ static int iss_net_set_mac(struct net_device *dev, void *addr)
static int iss_net_change_mtu(struct net_device *dev, int new_mtu)
{
#if 0
struct iss_net_private *lp = dev->priv;
struct iss_net_private *lp = netdev_priv(dev);
int err = 0;
spin_lock(&lp->lock);
@ -636,7 +636,7 @@ static int iss_net_configure(int index, char *init)
/* Initialize private element. */
lp = dev->priv;
lp = netdev_priv(dev);
*lp = ((struct iss_net_private) {
.device_list = LIST_HEAD_INIT(lp->device_list),
.opened_list = LIST_HEAD_INIT(lp->opened_list),
@ -660,10 +660,7 @@ static int iss_net_configure(int index, char *init)
printk(KERN_INFO "Netdevice %d ", index);
if (lp->have_mac)
printk("(%02x:%02x:%02x:%02x:%02x:%02x) ",
lp->mac[0], lp->mac[1],
lp->mac[2], lp->mac[3],
lp->mac[4], lp->mac[5]);
printk("(%pM) ", lp->mac);
printk(": ");
/* sysfs register */

6
drivers/atm/Kconfig
View File

@ -391,4 +391,10 @@ config ATM_HE_USE_SUNI
Support for the S/UNI-Ultra and S/UNI-622 found in the ForeRunner
HE cards. This driver provides carrier detection some statistics.
config ATM_SOLOS
tristate "Solos ADSL2+ PCI Multiport card driver"
depends on PCI
help
Support for the Solos multiport ADSL2+ card.
endif # ATM

1
drivers/atm/Makefile
View File

@ -12,6 +12,7 @@ obj-$(CONFIG_ATM_IA) += iphase.o suni.o
obj-$(CONFIG_ATM_FORE200E) += fore_200e.o
obj-$(CONFIG_ATM_ENI) += eni.o suni.o
obj-$(CONFIG_ATM_IDT77252) += idt77252.o
obj-$(CONFIG_ATM_SOLOS) += solos-pci.o
ifeq ($(CONFIG_ATM_NICSTAR_USE_SUNI),y)
obj-$(CONFIG_ATM_NICSTAR) += suni.o

790
drivers/atm/solos-pci.c 100644
View File

@ -0,0 +1,790 @@
/*
* Driver for the Solos PCI ADSL2+ card, designed to support Linux by
* Traverse Technologies -- http://www.traverse.com.au/
* Xrio Limited -- http://www.xrio.com/
*
*
* Copyright © 2008 Traverse Technologies
* Copyright © 2008 Intel Corporation
*
* Authors: Nathan Williams <nathan@traverse.com.au>
* David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define DEBUG
#define VERBOSE_DEBUG
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
#include <linux/skbuff.h>
#include <linux/sysfs.h>
#include <linux/device.h>
#include <linux/kobject.h>
#define VERSION "0.04"
#define PTAG "solos-pci"
#define CONFIG_RAM_SIZE 128
#define FLAGS_ADDR 0x7C
#define IRQ_EN_ADDR 0x78
#define FPGA_VER 0x74
#define IRQ_CLEAR 0x70
#define BUG_FLAG 0x6C
#define DATA_RAM_SIZE 32768
#define BUF_SIZE 4096
#define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2)
#define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE)
static int debug = 0;
static int atmdebug = 0;
struct pkt_hdr {
__le16 size;
__le16 vpi;
__le16 vci;
__le16 type;
};
#define PKT_DATA 0
#define PKT_COMMAND 1
#define PKT_POPEN 3
#define PKT_PCLOSE 4
struct solos_card {
void __iomem *config_regs;
void __iomem *buffers;
int nr_ports;
struct pci_dev *dev;
struct atm_dev *atmdev[4];
struct tasklet_struct tlet;
spinlock_t tx_lock;
spinlock_t tx_queue_lock;
spinlock_t cli_queue_lock;
struct sk_buff_head tx_queue[4];
struct sk_buff_head cli_queue[4];
};
#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
MODULE_DESCRIPTION("Solos PCI driver");
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_PARM_DESC(debug, "Enable Loopback");
MODULE_PARM_DESC(atmdebug, "Print ATM data");
module_param(debug, int, 0444);
module_param(atmdebug, int, 0444);
static int opens;
static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
struct atm_vcc *vcc);
static int fpga_tx(struct solos_card *);
static irqreturn_t solos_irq(int irq, void *dev_id);
static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
static int list_vccs(int vci);
static int atm_init(struct solos_card *);
static void atm_remove(struct solos_card *);
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
static void solos_bh(unsigned long);
static int print_buffer(struct sk_buff *buf);
static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
{
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
}
static ssize_t console_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
struct solos_card *card = atmdev->dev_data;
struct sk_buff *skb;
spin_lock(&card->cli_queue_lock);
skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
spin_unlock(&card->cli_queue_lock);
if(skb == NULL)
return sprintf(buf, "No data.\n");
memcpy(buf, skb->data, skb->len);
dev_dbg(&card->dev->dev, "len: %d\n", skb->len);
kfree_skb(skb);
return skb->len;
}
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
{
struct sk_buff *skb;
struct pkt_hdr *header;
// dev_dbg(&card->dev->dev, "size: %d\n", size);
if (size > (BUF_SIZE - sizeof(*header))) {
dev_dbg(&card->dev->dev, "Command is too big. Dropping request\n");
return 0;
}
skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
if (!skb) {
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
return 0;
}
header = (void *)skb_put(skb, sizeof(*header));
header->size = cpu_to_le16(size);
header->vpi = cpu_to_le16(0);
header->vci = cpu_to_le16(0);
header->type = cpu_to_le16(PKT_COMMAND);
memcpy(skb_put(skb, size), buf, size);
fpga_queue(card, dev, skb, NULL);
return 0;
}
static ssize_t console_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
struct solos_card *card = atmdev->dev_data;
int err;
err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
return err?:count;
}
static DEVICE_ATTR(console, 0644, console_show, console_store);
static irqreturn_t solos_irq(int irq, void *dev_id)
{
struct solos_card *card = dev_id;
int handled = 1;
//ACK IRQ
iowrite32(0, card->config_regs + IRQ_CLEAR);
//Disable IRQs from FPGA
iowrite32(0, card->config_regs + IRQ_EN_ADDR);
/* If we only do it when the device is open, we lose console
messages */
if (1 || opens)
tasklet_schedule(&card->tlet);
//Enable IRQs from FPGA
iowrite32(1, card->config_regs + IRQ_EN_ADDR);
return IRQ_RETVAL(handled);
}
void solos_bh(unsigned long card_arg)
{
struct solos_card *card = (void *)card_arg;
int port;
uint32_t card_flags;
uint32_t tx_mask;
uint32_t rx_done = 0;
card_flags = ioread32(card->config_regs + FLAGS_ADDR);
/* The TX bits are set if the channel is busy; clear if not. We want to
invoke fpga_tx() unless _all_ the bits for active channels are set */
tx_mask = (1 << card->nr_ports) - 1;
if ((card_flags & tx_mask) != tx_mask)
fpga_tx(card);
for (port = 0; port < card->nr_ports; port++) {
if (card_flags & (0x10 << port)) {
struct pkt_hdr header;
struct sk_buff *skb;
struct atm_vcc *vcc;
int size;
rx_done |= 0x10 << port;
memcpy_fromio(&header, RX_BUF(card, port), sizeof(header));
size = le16_to_cpu(header.size);
skb = alloc_skb(size, GFP_ATOMIC);
if (!skb) {
if (net_ratelimit())
dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
continue;
}
memcpy_fromio(skb_put(skb, size),
RX_BUF(card, port) + sizeof(header),
size);
if (atmdebug) {
dev_info(&card->dev->dev, "Received: device %d\n", port);
dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
size, le16_to_cpu(header.vpi),
le16_to_cpu(header.vci));
print_buffer(skb);
}
switch (le16_to_cpu(header.type)) {
case PKT_DATA:
vcc = find_vcc(card->atmdev[port], le16_to_cpu(header.vpi),
le16_to_cpu(header.vci));
if (!vcc) {
if (net_ratelimit())
dev_warn(&card->dev->dev, "Received packet for unknown VCI.VPI %d.%d on port %d\n",
le16_to_cpu(header.vci), le16_to_cpu(header.vpi),
port);
continue;
}
atm_charge(vcc, skb->truesize);
vcc->push(vcc, skb);
atomic_inc(&vcc->stats->rx);
break;
case PKT_COMMAND:
default: /* FIXME: Not really, surely? */
spin_lock(&card->cli_queue_lock);
if (skb_queue_len(&card->cli_queue[port]) > 10) {
if (net_ratelimit())
dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
port);
} else
skb_queue_tail(&card->cli_queue[port], skb);
spin_unlock(&card->cli_queue_lock);
break;
}
}
}
if (rx_done)
iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
return;
}
static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
{
struct hlist_head *head;
struct atm_vcc *vcc = NULL;
struct hlist_node *node;
struct sock *s;
read_lock(&vcc_sklist_lock);
head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
sk_for_each(s, node, head) {
vcc = atm_sk(s);
if (vcc->dev == dev && vcc->vci == vci &&
vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE)
goto out;
}
vcc = NULL;
out:
read_unlock(&vcc_sklist_lock);
return vcc;
}
static int list_vccs(int vci)
{
struct hlist_head *head;
struct atm_vcc *vcc;
struct hlist_node *node;
struct sock *s;
int num_found = 0;
int i;
read_lock(&vcc_sklist_lock);
if (vci != 0){
head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
sk_for_each(s, node, head) {
num_found ++;
vcc = atm_sk(s);
printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n",
vcc->dev->number,
vcc->vpi,
vcc->vci);
}
} else {
for(i=0; i<32; i++){
head = &vcc_hash[i];
sk_for_each(s, node, head) {
num_found ++;
vcc = atm_sk(s);
printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n",
vcc->dev->number,
vcc->vpi,
vcc->vci);
}
}
}
read_unlock(&vcc_sklist_lock);
return num_found;
}
static int popen(struct atm_vcc *vcc)
{
struct solos_card *card = vcc->dev->dev_data;
struct sk_buff *skb;
struct pkt_hdr *header;
skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
if (!skb && net_ratelimit()) {
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
return -ENOMEM;
}
header = (void *)skb_put(skb, sizeof(*header));
header->size = cpu_to_le16(sizeof(*header));
header->vpi = cpu_to_le16(vcc->vpi);
header->vci = cpu_to_le16(vcc->vci);
header->type = cpu_to_le16(PKT_POPEN);
fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
// dev_dbg(&card->dev->dev, "Open for vpi %d and vci %d on interface %d\n", vcc->vpi, vcc->vci, SOLOS_CHAN(vcc->dev));
set_bit(ATM_VF_ADDR, &vcc->flags); // accept the vpi / vci
set_bit(ATM_VF_READY, &vcc->flags);
list_vccs(0);
if (!opens)
iowrite32(1, card->config_regs + IRQ_EN_ADDR);
opens++; //count open PVCs
return 0;
}
static void pclose(struct atm_vcc *vcc)
{
struct solos_card *card = vcc->dev->dev_data;
struct sk_buff *skb;
struct pkt_hdr *header;
skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
if (!skb) {
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
return;
}
header = (void *)skb_put(skb, sizeof(*header));
header->size = cpu_to_le16(sizeof(*header));
header->vpi = cpu_to_le16(vcc->vpi);
header->vci = cpu_to_le16(vcc->vci);
header->type = cpu_to_le16(PKT_PCLOSE);
fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
// dev_dbg(&card->dev->dev, "Close for vpi %d and vci %d on interface %d\n", vcc->vpi, vcc->vci, SOLOS_CHAN(vcc->dev));
if (!--opens)
iowrite32(0, card->config_regs + IRQ_EN_ADDR);
clear_bit(ATM_VF_ADDR, &vcc->flags);
clear_bit(ATM_VF_READY, &vcc->flags);
return;
}
static int print_buffer(struct sk_buff *buf)
{
int len,i;
char msg[500];
char item[10];
len = buf->len;
for (i = 0; i < len; i++){
if(i % 8 == 0)
sprintf(msg, "%02X: ", i);
sprintf(item,"%02X ",*(buf->data + i));
strcat(msg, item);
if(i % 8 == 7) {
sprintf(item, "\n");
strcat(msg, item);
printk(KERN_DEBUG "%s", msg);
}
}
if (i % 8 != 0) {
sprintf(item, "\n");
strcat(msg, item);
printk(KERN_DEBUG "%s", msg);
}
printk(KERN_DEBUG "\n");
return 0;
}
static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
struct atm_vcc *vcc)
{
int old_len;
*(void **)skb->cb = vcc;
spin_lock(&card->tx_queue_lock);
old_len = skb_queue_len(&card->tx_queue[port]);
skb_queue_tail(&card->tx_queue[port], skb);
spin_unlock(&card->tx_queue_lock);
/* If TX might need to be started, do so */
if (!old_len)
fpga_tx(card);
}
static int fpga_tx(struct solos_card *card)
{
uint32_t tx_pending;
uint32_t tx_started = 0;
struct sk_buff *skb;
struct atm_vcc *vcc;
unsigned char port;
unsigned long flags;
spin_lock_irqsave(&card->tx_lock, flags);
tx_pending = ioread32(card->config_regs + FLAGS_ADDR);
dev_vdbg(&card->dev->dev, "TX Flags are %X\n", tx_pending);
for (port = 0; port < card->nr_ports; port++) {
if (!(tx_pending & (1 << port))) {
spin_lock(&card->tx_queue_lock);
skb = skb_dequeue(&card->tx_queue[port]);
spin_unlock(&card->tx_queue_lock);
if (!skb)
continue;
if (atmdebug) {
dev_info(&card->dev->dev, "Transmitted: port %d\n",
port);
print_buffer(skb);
}
memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
vcc = *(void **)skb->cb;
if (vcc) {
atomic_inc(&vcc->stats->tx);
solos_pop(vcc, skb);
} else
dev_kfree_skb_irq(skb);
tx_started |= 1 << port; //Set TX full flag
}
}
if (tx_started)
iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
spin_unlock_irqrestore(&card->tx_lock, flags);
return 0;
}
static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
{
struct solos_card *card = vcc->dev->dev_data;
struct sk_buff *skb2 = NULL;
struct pkt_hdr *header;
//dev_dbg(&card->dev->dev, "psend called.\n");
//dev_dbg(&card->dev->dev, "dev,vpi,vci = %d,%d,%d\n",SOLOS_CHAN(vcc->dev),vcc->vpi,vcc->vci);
if (debug) {
skb2 = atm_alloc_charge(vcc, skb->len, GFP_ATOMIC);
if (skb2) {
memcpy(skb2->data, skb->data, skb->len);
skb_put(skb2, skb->len);
vcc->push(vcc, skb2);
atomic_inc(&vcc->stats->rx);
}
atomic_inc(&vcc->stats->tx);
solos_pop(vcc, skb);
return 0;
}
if (skb->len > (BUF_SIZE - sizeof(*header))) {
dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
solos_pop(vcc, skb);
return 0;
}
if (!skb_clone_writable(skb, sizeof(*header))) {
int expand_by = 0;
int ret;
if (skb_headroom(skb) < sizeof(*header))
expand_by = sizeof(*header) - skb_headroom(skb);
ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
if (ret) {
solos_pop(vcc, skb);
return ret;
}
}
header = (void *)skb_push(skb, sizeof(*header));
header->size = cpu_to_le16(skb->len);
header->vpi = cpu_to_le16(vcc->vpi);
header->vci = cpu_to_le16(vcc->vci);
header->type = cpu_to_le16(PKT_DATA);
fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
return 0;
}
static struct atmdev_ops fpga_ops = {
.open = popen,
.close = pclose,
.ioctl = NULL,
.getsockopt = NULL,
.setsockopt = NULL,
.send = psend,
.send_oam = NULL,
.phy_put = NULL,
.phy_get = NULL,
.change_qos = NULL,
.proc_read = NULL,
.owner = THIS_MODULE
};
static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int err, i;
uint16_t fpga_ver;
uint8_t major_ver, minor_ver;
uint32_t data32;
struct solos_card *card;
if (debug)
return 0;
card = kzalloc(sizeof(*card), GFP_KERNEL);
if (!card)
return -ENOMEM;
card->dev = dev;
err = pci_enable_device(dev);
if (err) {
dev_warn(&dev->dev, "Failed to enable PCI device\n");
goto out;
}
err = pci_request_regions(dev, "solos");
if (err) {
dev_warn(&dev->dev, "Failed to request regions\n");
goto out;
}
card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
if (!card->config_regs) {
dev_warn(&dev->dev, "Failed to ioremap config registers\n");
goto out_release_regions;
}
card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
if (!card->buffers) {
dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
goto out_unmap_config;
}
// for(i=0;i<64 ;i+=4){
// data32=ioread32(card->buffers + i);
// dev_dbg(&card->dev->dev, "%08lX\n",(unsigned long)data32);
// }
//Fill Config Mem with zeros
for(i = 0; i < 128; i += 4)
iowrite32(0, card->config_regs + i);
//Set RX empty flags
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
data32 = ioread32(card->config_regs + FPGA_VER);
fpga_ver = (data32 & 0x0000FFFF);
major_ver = ((data32 & 0xFF000000) >> 24);
minor_ver = ((data32 & 0x00FF0000) >> 16);
dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
major_ver, minor_ver, fpga_ver);
card->nr_ports = 2; /* FIXME: Detect daughterboard */
err = atm_init(card);
if (err)
goto out_unmap_both;
pci_set_drvdata(dev, card);
tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
spin_lock_init(&card->tx_lock);
spin_lock_init(&card->tx_queue_lock);
spin_lock_init(&card->cli_queue_lock);
/*
// Set Loopback mode
data32 = 0x00010000;
iowrite32(data32,card->config_regs + FLAGS_ADDR);
*/
/*
// Fill Buffers with zeros
for (i = 0; i < BUF_SIZE * 8; i += 4)
iowrite32(0, card->buffers + i);
*/
/*
for(i = 0; i < (BUF_SIZE * 1); i += 4)
iowrite32(0x12345678, card->buffers + i + (0*BUF_SIZE));
for(i = 0; i < (BUF_SIZE * 1); i += 4)
iowrite32(0xabcdef98, card->buffers + i + (1*BUF_SIZE));
// Read Config Memory
printk(KERN_DEBUG "Reading Config MEM\n");
i = 0;
for(i = 0; i < 16; i++) {
data32=ioread32(card->buffers + i*(BUF_SIZE/2));
printk(KERN_ALERT "Addr: %lX Data: %08lX\n",
(unsigned long)(addr_start + i*(BUF_SIZE/2)),
(unsigned long)data32);
}
*/
//dev_dbg(&card->dev->dev, "Requesting IRQ: %d\n",dev->irq);
err = request_irq(dev->irq, solos_irq, IRQF_DISABLED|IRQF_SHARED,
"solos-pci", card);
if (err)
dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
// Enable IRQs
iowrite32(1, card->config_regs + IRQ_EN_ADDR);
return 0;
out_unmap_both:
pci_iounmap(dev, card->config_regs);
out_unmap_config:
pci_iounmap(dev, card->buffers);
out_release_regions:
pci_release_regions(dev);
out:
return err;
}
static int atm_init(struct solos_card *card)
{
int i;
opens = 0;
for (i = 0; i < card->nr_ports; i++) {
skb_queue_head_init(&card->tx_queue[i]);
skb_queue_head_init(&card->cli_queue[i]);
card->atmdev[i] = atm_dev_register("solos-pci", &fpga_ops, -1, NULL);
if (!card->atmdev[i]) {
dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
atm_remove(card);
return -ENODEV;
}
if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
card->atmdev[i]->ci_range.vpi_bits = 8;
card->atmdev[i]->ci_range.vci_bits = 16;
card->atmdev[i]->dev_data = card;
card->atmdev[i]->phy_data = (void *)(unsigned long)i;
}
return 0;
}
static void atm_remove(struct solos_card *card)
{
int i;
for (i = 0; i < card->nr_ports; i++) {
if (card->atmdev[i]) {
dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
atm_dev_deregister(card->atmdev[i]);
}
}
}
static void fpga_remove(struct pci_dev *dev)
{
struct solos_card *card = pci_get_drvdata(dev);
if (debug)
return;
atm_remove(card);
dev_vdbg(&dev->dev, "Freeing IRQ\n");
// Disable IRQs from FPGA
iowrite32(0, card->config_regs + IRQ_EN_ADDR);
free_irq(dev->irq, card);
tasklet_kill(&card->tlet);
// iowrite32(0x01,pciregs);
dev_vdbg(&dev->dev, "Unmapping PCI resource\n");
pci_iounmap(dev, card->buffers);
pci_iounmap(dev, card->config_regs);
dev_vdbg(&dev->dev, "Releasing PCI Region\n");
pci_release_regions(dev);
pci_disable_device(dev);
pci_set_drvdata(dev, NULL);
kfree(card);
// dev_dbg(&card->dev->dev, "fpga_remove\n");
return;
}
static struct pci_device_id fpga_pci_tbl[] __devinitdata = {
{ 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
static struct pci_driver fpga_driver = {
.name = "solos",
.id_table = fpga_pci_tbl,
.probe = fpga_probe,
.remove = fpga_remove,
};
static int __init solos_pci_init(void)
{
printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
return pci_register_driver(&fpga_driver);
}
static void __exit solos_pci_exit(void)
{
pci_unregister_driver(&fpga_driver);
printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
}
module_init(solos_pci_init);
module_exit(solos_pci_exit);

1
drivers/block/aoe/aoe.h
View File

@ -200,4 +200,3 @@ void aoenet_xmit(struct sk_buff_head *);
int is_aoe_netif(struct net_device *ifp);
int set_aoe_iflist(const char __user *str, size_t size);
unsigned long long mac_addr(char addr[6]);

2
drivers/block/aoe/aoeblk.c
View File

@ -37,7 +37,7 @@ static ssize_t aoedisk_show_mac(struct device *dev,
if (t == NULL)
return snprintf(page, PAGE_SIZE, "none\n");
return snprintf(page, PAGE_SIZE, "%012llx\n", mac_addr(t->addr));
return snprintf(page, PAGE_SIZE, "%pm\n", t->addr);
}
static ssize_t aoedisk_show_netif(struct device *dev,
struct device_attribute *attr, char *page)

22
drivers/block/aoe/aoecmd.c
View File

@ -349,11 +349,9 @@ resend(struct aoedev *d, struct aoetgt *t, struct frame *f)
ah = (struct aoe_atahdr *) (h+1);
snprintf(buf, sizeof buf,
"%15s e%ld.%d oldtag=%08x@%08lx newtag=%08x "
"s=%012llx d=%012llx nout=%d\n",
"%15s e%ld.%d oldtag=%08x@%08lx newtag=%08x s=%pm d=%pm nout=%d\n",
"retransmit", d->aoemajor, d->aoeminor, f->tag, jiffies, n,
mac_addr(h->src),
mac_addr(h->dst), t->nout);
h->src, h->dst, t->nout);
aoechr_error(buf);
f->tag = n;
@ -544,10 +542,10 @@ rexmit_timer(ulong vp)
printk(KERN_INFO
"aoe: e%ld.%d: "
"too many lost jumbo on "
"%s:%012llx - "
"%s:%pm - "
"falling back to %d frames.\n",
d->aoemajor, d->aoeminor,
ifp->nd->name, mac_addr(t->addr),
ifp->nd->name, t->addr,
DEFAULTBCNT);
ifp->maxbcnt = 0;
}
@ -672,8 +670,8 @@ ataid_complete(struct aoedev *d, struct aoetgt *t, unsigned char *id)
if (d->ssize != ssize)
printk(KERN_INFO
"aoe: %012llx e%ld.%d v%04x has %llu sectors\n",
mac_addr(t->addr),
"aoe: %pm e%ld.%d v%04x has %llu sectors\n",
t->addr,
d->aoemajor, d->aoeminor,
d->fw_ver, (long long)ssize);
d->ssize = ssize;
@ -775,8 +773,8 @@ aoecmd_ata_rsp(struct sk_buff *skb)
n = get_unaligned_be32(&hin->tag);
t = gettgt(d, hin->src);
if (t == NULL) {
printk(KERN_INFO "aoe: can't find target e%ld.%d:%012llx\n",
d->aoemajor, d->aoeminor, mac_addr(hin->src));
printk(KERN_INFO "aoe: can't find target e%ld.%d:%pm\n",
d->aoemajor, d->aoeminor, hin->src);
spin_unlock_irqrestore(&d->lock, flags);
return;
}
@ -1036,10 +1034,10 @@ aoecmd_cfg_rsp(struct sk_buff *skb)
n = n ? n * 512 : DEFAULTBCNT;
if (n != ifp->maxbcnt) {
printk(KERN_INFO
"aoe: e%ld.%d: setting %d%s%s:%012llx\n",
"aoe: e%ld.%d: setting %d%s%s:%pm\n",
d->aoemajor, d->aoeminor, n,
" byte data frames on ", ifp->nd->name,
mac_addr(t->addr));
t->addr);
ifp->maxbcnt = n;
}
}

11
drivers/block/aoe/aoenet.c
View File

@ -83,17 +83,6 @@ set_aoe_iflist(const char __user *user_str, size_t size)
return 0;
}
unsigned long long
mac_addr(char addr[6])
{
__be64 n = 0;
char *p = (char *) &n;
memcpy(p + 2, addr, 6); /* (sizeof addr != 6) */
return (unsigned long long) __be64_to_cpu(n);
}
void
aoenet_xmit(struct sk_buff_head *queue)
{

20
drivers/bluetooth/Kconfig
View File

@ -2,26 +2,6 @@
menu "Bluetooth device drivers"
depends on BT
config BT_HCIUSB
tristate "HCI USB driver (old version)"
depends on USB && BT_HCIBTUSB=n
help
Bluetooth HCI USB driver.
This driver is required if you want to use Bluetooth devices with
USB interface.
Say Y here to compile support for Bluetooth USB devices into the
kernel or say M to compile it as module (hci_usb).
config BT_HCIUSB_SCO
bool "SCO (voice) support"
depends on BT_HCIUSB
help
This option enables the SCO support in the HCI USB driver. You need this
to transmit voice data with your Bluetooth USB device.
Say Y here to compile support for SCO over HCI USB.
config BT_HCIBTUSB
tristate "HCI USB driver"
depends on USB

1
drivers/bluetooth/Makefile
View File

@ -2,7 +2,6 @@
# Makefile for the Linux Bluetooth HCI device drivers.
#
obj-$(CONFIG_BT_HCIUSB) += hci_usb.o
obj-$(CONFIG_BT_HCIVHCI) += hci_vhci.o
obj-$(CONFIG_BT_HCIUART) += hci_uart.o
obj-$(CONFIG_BT_HCIBCM203X) += bcm203x.o

9
drivers/bluetooth/bcm203x.c
View File

@ -37,11 +37,6 @@
#include <net/bluetooth/bluetooth.h>
#ifndef CONFIG_BT_HCIBCM203X_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
#define VERSION "1.2"
static struct usb_device_id bcm203x_table[] = {
@ -199,7 +194,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
return -EIO;
}
BT_DBG("minidrv data %p size %d", firmware->data, firmware->size);
BT_DBG("minidrv data %p size %zu", firmware->data, firmware->size);
size = max_t(uint, firmware->size, 4096);
@ -227,7 +222,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
return -EIO;
}
BT_DBG("firmware data %p size %d", firmware->data, firmware->size);
BT_DBG("firmware data %p size %zu", firmware->data, firmware->size);
data->fw_data = kmalloc(firmware->size, GFP_KERNEL);
if (!data->fw_data) {

11
drivers/bluetooth/bfusb.c
View File

@ -38,11 +38,6 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#ifndef CONFIG_BT_HCIBFUSB_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
#define VERSION "1.2"
static struct usb_driver bfusb_driver;
@ -221,7 +216,7 @@ static int bfusb_rx_submit(struct bfusb_data *data, struct urb *urb)
struct sk_buff *skb;
int err, pipe, size = HCI_MAX_FRAME_SIZE + 32;
BT_DBG("bfusb %p urb %p", bfusb, urb);
BT_DBG("bfusb %p urb %p", data, urb);
if (!urb && !(urb = usb_alloc_urb(0, GFP_ATOMIC)))
return -ENOMEM;
@ -354,7 +349,7 @@ static void bfusb_rx_complete(struct urb *urb)
int count = urb->actual_length;
int err, hdr, len;
BT_DBG("bfusb %p urb %p skb %p len %d", bfusb, urb, skb, skb->len);
BT_DBG("bfusb %p urb %p skb %p len %d", data, urb, skb, skb->len);
read_lock(&data->lock);
@ -691,7 +686,7 @@ static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *i
goto error;
}
BT_DBG("firmware data %p size %d", firmware->data, firmware->size);
BT_DBG("firmware data %p size %zu", firmware->data, firmware->size);
if (bfusb_load_firmware(data, firmware->data, firmware->size) < 0) {
BT_ERR("Firmware loading failed");

7
drivers/bluetooth/bpa10x.c
View File

@ -35,11 +35,6 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#ifndef CONFIG_BT_HCIBPA10X_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
#define VERSION "0.10"
static struct usb_device_id bpa10x_table[] = {
@ -489,6 +484,8 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *
hdev->owner = THIS_MODULE;
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
err = hci_register_dev(hdev);
if (err < 0) {
hci_free_dev(hdev);

8
drivers/bluetooth/bt3c_cs.c
View File

@ -502,15 +502,15 @@ static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware,
memset(b, 0, sizeof(b));
memcpy(b, ptr + 2, 2);
size = simple_strtol(b, NULL, 16);
size = simple_strtoul(b, NULL, 16);
memset(b, 0, sizeof(b));
memcpy(b, ptr + 4, 8);
addr = simple_strtol(b, NULL, 16);
addr = simple_strtoul(b, NULL, 16);
memset(b, 0, sizeof(b));
memcpy(b, ptr + (size * 2) + 2, 2);
fcs = simple_strtol(b, NULL, 16);
fcs = simple_strtoul(b, NULL, 16);
memset(b, 0, sizeof(b));
for (tmp = 0, i = 0; i < size; i++) {
@ -530,7 +530,7 @@ static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware,
memset(b, 0, sizeof(b));
for (i = 0; i < (size - 4) / 2; i++) {
memcpy(b, ptr + (i * 4) + 12, 4);
tmp = simple_strtol(b, NULL, 16);
tmp = simple_strtoul(b, NULL, 16);
bt3c_put(iobase, tmp);
}
}

6
drivers/bluetooth/btsdio.c
View File

@ -37,11 +37,6 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#ifndef CONFIG_BT_HCIBTSDIO_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
#define VERSION "0.1"
static const struct sdio_device_id btsdio_table[] = {
@ -91,6 +86,7 @@ static int btsdio_tx_packet(struct btsdio_data *data, struct sk_buff *skb)
err = sdio_writesb(data->func, REG_TDAT, skb->data, skb->len);
if (err < 0) {
skb_pull(skb, 4);
sdio_writeb(data->func, 0x01, REG_PC_WRT, NULL);
return err;
}

229
drivers/bluetooth/btusb.c
View File

@ -35,31 +35,25 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
//#define CONFIG_BT_HCIBTUSB_DEBUG
#ifndef CONFIG_BT_HCIBTUSB_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
#define VERSION "0.3"
#define VERSION "0.4"
static int ignore_dga;
static int ignore_csr;
static int ignore_sniffer;
static int disable_scofix;
static int force_scofix;
static int reset;
static int reset = 1;
static struct usb_driver btusb_driver;
#define BTUSB_IGNORE 0x01
#define BTUSB_RESET 0x02
#define BTUSB_DIGIANSWER 0x04
#define BTUSB_CSR 0x08
#define BTUSB_SNIFFER 0x10
#define BTUSB_BCM92035 0x20
#define BTUSB_BROKEN_ISOC 0x40
#define BTUSB_WRONG_SCO_MTU 0x80
#define BTUSB_DIGIANSWER 0x02
#define BTUSB_CSR 0x04
#define BTUSB_SNIFFER 0x08
#define BTUSB_BCM92035 0x10
#define BTUSB_BROKEN_ISOC 0x20
#define BTUSB_WRONG_SCO_MTU 0x40
static struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@ -79,7 +73,7 @@ static struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x0bdb, 0x1002) },
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_RESET },
{ USB_DEVICE(0x0c10, 0x0000) },
{ } /* Terminating entry */
};
@ -94,52 +88,37 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
/* Broadcom BCM2045 */
{ USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
/* Broadcom BCM2046 */
{ USB_DEVICE(0x0a5c, 0x2146), .driver_info = BTUSB_RESET },
{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET },
/* Apple MacBook Pro with Broadcom chip */
{ USB_DEVICE(0x05ac, 0x820f), .driver_info = BTUSB_RESET },
{ USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
/* Targus ACB10US */
{ USB_DEVICE(0x0a5c, 0x2100), .driver_info = BTUSB_RESET },
{ USB_DEVICE(0x0a5c, 0x2154), .driver_info = BTUSB_RESET },
/* ANYCOM Bluetooth USB-200 and USB-250 */
{ USB_DEVICE(0x0a5c, 0x2111), .driver_info = BTUSB_RESET },
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
/* HP laptop with Broadcom chip */
{ USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Dell laptop with Broadcom chip */
{ USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Dell Wireless 370 */
{ USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
/* Dell Wireless 370 and 410 devices */
{ USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Dell Wireless 410 */
{ USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
/* Belkin F8T012 and F8T013 devices */
{ USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
{ USB_DEVICE(0x045e, 0x009c), .driver_info = BTUSB_RESET },
/* Asus WL-BTD202 device */
{ USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Kensington Bluetooth USB adapter */
{ USB_DEVICE(0x047d, 0x105d), .driver_info = BTUSB_RESET },
{ USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
/* ISSC Bluetooth Adapter v3.1 */
{ USB_DEVICE(0x1131, 0x1001), .driver_info = BTUSB_RESET },
{ USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
/* RTX Telecom based adapters with buggy SCO support */
{ USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
@ -148,13 +127,6 @@ static struct usb_device_id blacklist_table[] = {
/* CONWISE Technology based adapters with buggy SCO support */
{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
/* Belkin F8T012 and F8T013 devices */
{ USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
/* Belkin F8T016 device */
{ USB_DEVICE(0x050d, 0x016a), .driver_info = BTUSB_RESET },
/* Digianswer devices */
{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
@ -197,7 +169,10 @@ struct btusb_data {
struct usb_endpoint_descriptor *isoc_tx_ep;
struct usb_endpoint_descriptor *isoc_rx_ep;
__u8 cmdreq_type;
int isoc_altsetting;
int suspend_count;
};
static void btusb_intr_complete(struct urb *urb)
@ -236,7 +211,7 @@ static void btusb_intr_complete(struct urb *urb)
}
}
static int btusb_submit_intr_urb(struct hci_dev *hdev)
static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hdev->driver_data;
struct urb *urb;
@ -249,13 +224,13 @@ static int btusb_submit_intr_urb(struct hci_dev *hdev)
if (!data->intr_ep)
return -ENODEV;
urb = usb_alloc_urb(0, GFP_ATOMIC);
urb = usb_alloc_urb(0, mem_flags);
if (!urb)
return -ENOMEM;
size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
buf = kmalloc(size, GFP_ATOMIC);
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
@ -271,7 +246,7 @@ static int btusb_submit_intr_urb(struct hci_dev *hdev)
usb_anchor_urb(urb, &data->intr_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
@ -319,7 +294,7 @@ static void btusb_bulk_complete(struct urb *urb)
}
}
static int btusb_submit_bulk_urb(struct hci_dev *hdev)
static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hdev->driver_data;
struct urb *urb;
@ -332,13 +307,13 @@ static int btusb_submit_bulk_urb(struct hci_dev *hdev)
if (!data->bulk_rx_ep)
return -ENODEV;
urb = usb_alloc_urb(0, GFP_KERNEL);
urb = usb_alloc_urb(0, mem_flags);
if (!urb)
return -ENOMEM;
size = le16_to_cpu(data->bulk_rx_ep->wMaxPacketSize);
buf = kmalloc(size, GFP_KERNEL);
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
@ -353,7 +328,7 @@ static int btusb_submit_bulk_urb(struct hci_dev *hdev)
usb_anchor_urb(urb, &data->bulk_anchor);
err = usb_submit_urb(urb, GFP_KERNEL);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
@ -430,7 +405,7 @@ static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
urb->number_of_packets = i;
}
static int btusb_submit_isoc_urb(struct hci_dev *hdev)
static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hdev->driver_data;
struct urb *urb;
@ -443,14 +418,14 @@ static int btusb_submit_isoc_urb(struct hci_dev *hdev)
if (!data->isoc_rx_ep)
return -ENODEV;
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
if (!urb)
return -ENOMEM;
size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
BTUSB_MAX_ISOC_FRAMES;
buf = kmalloc(size, GFP_KERNEL);
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
@ -473,7 +448,7 @@ static int btusb_submit_isoc_urb(struct hci_dev *hdev)
usb_anchor_urb(urb, &data->isoc_anchor);
err = usb_submit_urb(urb, GFP_KERNEL);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
@ -520,7 +495,7 @@ static int btusb_open(struct hci_dev *hdev)
if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
return 0;
err = btusb_submit_intr_urb(hdev);
err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
if (err < 0) {
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
clear_bit(HCI_RUNNING, &hdev->flags);
@ -589,7 +564,7 @@ static int btusb_send_frame(struct sk_buff *skb)
return -ENOMEM;
}
dr->bRequestType = USB_TYPE_CLASS;
dr->bRequestType = data->cmdreq_type;
dr->bRequest = 0;
dr->wIndex = 0;
dr->wValue = 0;
@ -680,8 +655,19 @@ static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
BT_DBG("%s evt %d", hdev->name, evt);
if (evt == HCI_NOTIFY_CONN_ADD || evt == HCI_NOTIFY_CONN_DEL)
schedule_work(&data->work);
if (hdev->conn_hash.acl_num > 0) {
if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
if (btusb_submit_bulk_urb(hdev, GFP_ATOMIC) < 0)
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
else
btusb_submit_bulk_urb(hdev, GFP_ATOMIC);
}
} else {
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
usb_unlink_anchored_urbs(&data->bulk_anchor);
}
schedule_work(&data->work);
}
static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting)
@ -732,18 +718,6 @@ static void btusb_work(struct work_struct *work)
struct btusb_data *data = container_of(work, struct btusb_data, work);
struct hci_dev *hdev = data->hdev;
if (hdev->conn_hash.acl_num > 0) {
if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
if (btusb_submit_bulk_urb(hdev) < 0)
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
else
btusb_submit_bulk_urb(hdev);
}
} else {
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->bulk_anchor);
}
if (hdev->conn_hash.sco_num > 0) {
if (data->isoc_altsetting != 2) {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
@ -754,10 +728,10 @@ static void btusb_work(struct work_struct *work)
}
if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
if (btusb_submit_isoc_urb(hdev) < 0)
if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
else
btusb_submit_isoc_urb(hdev);
btusb_submit_isoc_urb(hdev, GFP_KERNEL);
}
} else {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
@ -828,6 +802,8 @@ static int btusb_probe(struct usb_interface *intf,
return -ENODEV;
}
data->cmdreq_type = USB_TYPE_CLASS;
data->udev = interface_to_usbdev(intf);
data->intf = intf;
@ -862,11 +838,11 @@ static int btusb_probe(struct usb_interface *intf,
hdev->owner = THIS_MODULE;
/* interface numbers are hardcoded in the spec */
/* Interface numbers are hardcoded in the specification */
data->isoc = usb_ifnum_to_if(data->udev, 1);
if (reset || id->driver_info & BTUSB_RESET)
set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
if (!reset)
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
if (!disable_scofix)
@ -876,9 +852,23 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_BROKEN_ISOC)
data->isoc = NULL;
if (id->driver_info & BTUSB_DIGIANSWER) {
data->cmdreq_type = USB_TYPE_VENDOR;
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
}
if (id->driver_info & BTUSB_CSR) {
struct usb_device *udev = data->udev;
/* Old firmware would otherwise execute USB reset */
if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117)
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
}
if (id->driver_info & BTUSB_SNIFFER) {
struct usb_device *udev = data->udev;
/* New sniffer firmware has crippled HCI interface */
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
@ -949,10 +939,71 @@ static void btusb_disconnect(struct usb_interface *intf)
hci_free_dev(hdev);
}
static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct btusb_data *data = usb_get_intfdata(intf);
BT_DBG("intf %p", intf);
if (data->suspend_count++)
return 0;
cancel_work_sync(&data->work);
usb_kill_anchored_urbs(&data->tx_anchor);
usb_kill_anchored_urbs(&data->isoc_anchor);
usb_kill_anchored_urbs(&data->bulk_anchor);
usb_kill_anchored_urbs(&data->intr_anchor);
return 0;
}
static int btusb_resume(struct usb_interface *intf)
{
struct btusb_data *data = usb_get_intfdata(intf);
struct hci_dev *hdev = data->hdev;
int err;
BT_DBG("intf %p", intf);
if (--data->suspend_count)
return 0;
if (!test_bit(HCI_RUNNING, &hdev->flags))
return 0;
if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
err = btusb_submit_intr_urb(hdev, GFP_NOIO);
if (err < 0) {
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
return err;
}
}
if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
if (btusb_submit_bulk_urb(hdev, GFP_NOIO) < 0)
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
else
btusb_submit_bulk_urb(hdev, GFP_NOIO);
}
if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
else
btusb_submit_isoc_urb(hdev, GFP_NOIO);
}
return 0;
}
static struct usb_driver btusb_driver = {
.name = "btusb",
.probe = btusb_probe,
.disconnect = btusb_disconnect,
.suspend = btusb_suspend,
.resume = btusb_resume,
.id_table = btusb_table,
};

5
drivers/bluetooth/hci_bcsp.c
View File

@ -47,11 +47,6 @@
#include "hci_uart.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
#define VERSION "0.3"
static int txcrc = 1;

5
drivers/bluetooth/hci_h4.c
View File

@ -46,11 +46,6 @@
#include "hci_uart.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
#define VERSION "1.2"
struct h4_struct {

9
drivers/bluetooth/hci_ldisc.c
View File

@ -46,11 +46,6 @@
#include "hci_uart.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
#define VERSION "2.2"
static int reset = 0;
@ -399,8 +394,8 @@ static int hci_uart_register_dev(struct hci_uart *hu)
hdev->owner = THIS_MODULE;
if (reset)
set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
if (!reset)
set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
if (hci_register_dev(hdev) < 0) {
BT_ERR("Can't register HCI device");

1136
drivers/bluetooth/hci_usb.c
View File

File diff suppressed because it is too large Load Diff

129
drivers/bluetooth/hci_usb.h
View File

@ -1,129 +0,0 @@
/*
HCI USB driver for Linux Bluetooth protocol stack (BlueZ)
Copyright (C) 2000-2001 Qualcomm Incorporated
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
Copyright (C) 2003 Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
/* Class, SubClass, and Protocol codes that describe a Bluetooth device */
#define HCI_DEV_CLASS 0xe0 /* Wireless class */
#define HCI_DEV_SUBCLASS 0x01 /* RF subclass */
#define HCI_DEV_PROTOCOL 0x01 /* Bluetooth programming protocol */
#define HCI_IGNORE 0x01
#define HCI_RESET 0x02
#define HCI_DIGIANSWER 0x04
#define HCI_CSR 0x08
#define HCI_SNIFFER 0x10
#define HCI_BCM92035 0x20
#define HCI_BROKEN_ISOC 0x40
#define HCI_WRONG_SCO_MTU 0x80
#define HCI_MAX_IFACE_NUM 3
#define HCI_MAX_BULK_TX 4
#define HCI_MAX_BULK_RX 1
#define HCI_MAX_ISOC_RX 2
#define HCI_MAX_ISOC_TX 2
#define HCI_MAX_ISOC_FRAMES 10
struct _urb_queue {
struct list_head head;
spinlock_t lock;
};
struct _urb {
struct list_head list;
struct _urb_queue *queue;
int type;
void *priv;
struct urb urb;
};
static inline void _urb_queue_init(struct _urb_queue *q)
{
INIT_LIST_HEAD(&q->head);
spin_lock_init(&q->lock);
}
static inline void _urb_queue_head(struct _urb_queue *q, struct _urb *_urb)
{
unsigned long flags;
spin_lock_irqsave(&q->lock, flags);
/* _urb_unlink needs to know which spinlock to use, thus smp_mb(). */
_urb->queue = q; smp_mb(); list_add(&_urb->list, &q->head);
spin_unlock_irqrestore(&q->lock, flags);
}
static inline void _urb_queue_tail(struct _urb_queue *q, struct _urb *_urb)
{
unsigned long flags;
spin_lock_irqsave(&q->lock, flags);
/* _urb_unlink needs to know which spinlock to use, thus smp_mb(). */
_urb->queue = q; smp_mb(); list_add_tail(&_urb->list, &q->head);
spin_unlock_irqrestore(&q->lock, flags);
}
static inline void _urb_unlink(struct _urb *_urb)
{
struct _urb_queue *q;
unsigned long flags;
smp_mb();
q = _urb->queue;
/* If q is NULL, it will die at easy-to-debug NULL pointer dereference.
No need to BUG(). */
spin_lock_irqsave(&q->lock, flags);
list_del(&_urb->list); _urb->queue = NULL;
spin_unlock_irqrestore(&q->lock, flags);
}
struct hci_usb {
struct hci_dev *hdev;
unsigned long state;
struct usb_device *udev;
struct usb_host_endpoint *bulk_in_ep;
struct usb_host_endpoint *bulk_out_ep;
struct usb_host_endpoint *intr_in_ep;
struct usb_interface *isoc_iface;
struct usb_host_endpoint *isoc_out_ep;
struct usb_host_endpoint *isoc_in_ep;
__u8 ctrl_req;
struct sk_buff_head transmit_q[4];
rwlock_t completion_lock;
atomic_t pending_tx[4]; /* Number of pending requests */
struct _urb_queue pending_q[4]; /* Pending requests */
struct _urb_queue completed_q[4]; /* Completed requests */
};
/* States */
#define HCI_USB_TX_PROCESS 1
#define HCI_USB_TX_WAKEUP 2

5
drivers/bluetooth/hci_vhci.c
View File

@ -40,11 +40,6 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#ifndef CONFIG_BT_HCIVHCI_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
#define VERSION "1.2"
static int minor = MISC_DYNAMIC_MINOR;

7
drivers/firmware/iscsi_ibft.c
View File

@ -284,15 +284,12 @@ static ssize_t sprintf_ipaddr(char *buf, u8 *ip)
/*
* IPV4
*/
str += sprintf(buf, NIPQUAD_FMT, ip[12],
ip[13], ip[14], ip[15]);
str += sprintf(buf, "%pI4", ip + 12);
} else {
/*
* IPv6
*/
str += sprintf(str, NIP6_FMT, ntohs(ip[0]), ntohs(ip[1]),
ntohs(ip[2]), ntohs(ip[3]), ntohs(ip[4]),
ntohs(ip[5]), ntohs(ip[6]), ntohs(ip[7]));
str += sprintf(str, "%pI6", ip);
}
str += sprintf(str, "\n");
return str - buf;

10
drivers/infiniband/core/sysfs.c
View File

@ -262,15 +262,7 @@ static ssize_t show_port_gid(struct ib_port *p, struct port_attribute *attr,
if (ret)
return ret;
return sprintf(buf, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
be16_to_cpu(((__be16 *) gid.raw)[0]),
be16_to_cpu(((__be16 *) gid.raw)[1]),
be16_to_cpu(((__be16 *) gid.raw)[2]),
be16_to_cpu(((__be16 *) gid.raw)[3]),
be16_to_cpu(((__be16 *) gid.raw)[4]),
be16_to_cpu(((__be16 *) gid.raw)[5]),
be16_to_cpu(((__be16 *) gid.raw)[6]),
be16_to_cpu(((__be16 *) gid.raw)[7]));
return sprintf(buf, "%pI6\n", gid.raw);
}
static ssize_t show_port_pkey(struct ib_port *p, struct port_attribute *attr,

8
drivers/infiniband/hw/amso1100/c2_provider.c
View File

@ -653,7 +653,7 @@ static int c2_service_destroy(struct iw_cm_id *cm_id)
static int c2_pseudo_up(struct net_device *netdev)
{
struct in_device *ind;
struct c2_dev *c2dev = netdev->priv;
struct c2_dev *c2dev = netdev->ml_priv;
ind = in_dev_get(netdev);
if (!ind)
@ -678,7 +678,7 @@ static int c2_pseudo_up(struct net_device *netdev)
static int c2_pseudo_down(struct net_device *netdev)
{
struct in_device *ind;
struct c2_dev *c2dev = netdev->priv;
struct c2_dev *c2dev = netdev->ml_priv;
ind = in_dev_get(netdev);
if (!ind)
@ -746,14 +746,14 @@ static struct net_device *c2_pseudo_netdev_init(struct c2_dev *c2dev)
/* change ethxxx to iwxxx */
strcpy(name, "iw");
strcat(name, &c2dev->netdev->name[3]);
netdev = alloc_netdev(sizeof(*netdev), name, setup);
netdev = alloc_netdev(0, name, setup);
if (!netdev) {
printk(KERN_ERR PFX "%s - etherdev alloc failed",
__func__);
return NULL;
}
netdev->priv = c2dev;
netdev->ml_priv = c2dev;
SET_NETDEV_DEV(netdev, &c2dev->pcidev->dev);

23
drivers/infiniband/hw/mthca/mthca_mcg.c
View File

@ -87,17 +87,7 @@ static int find_mgm(struct mthca_dev *dev,
}
if (0)
mthca_dbg(dev, "Hash for %04x:%04x:%04x:%04x:"
"%04x:%04x:%04x:%04x is %04x\n",
be16_to_cpu(((__be16 *) gid)[0]),
be16_to_cpu(((__be16 *) gid)[1]),
be16_to_cpu(((__be16 *) gid)[2]),
be16_to_cpu(((__be16 *) gid)[3]),
be16_to_cpu(((__be16 *) gid)[4]),
be16_to_cpu(((__be16 *) gid)[5]),
be16_to_cpu(((__be16 *) gid)[6]),
be16_to_cpu(((__be16 *) gid)[7]),
*hash);
mthca_dbg(dev, "Hash for %pI6 is %04x\n", gid, *hash);
*index = *hash;
*prev = -1;
@ -264,16 +254,7 @@ int mthca_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
goto out;
if (index == -1) {
mthca_err(dev, "MGID %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x "
"not found\n",
be16_to_cpu(((__be16 *) gid->raw)[0]),
be16_to_cpu(((__be16 *) gid->raw)[1]),
be16_to_cpu(((__be16 *) gid->raw)[2]),
be16_to_cpu(((__be16 *) gid->raw)[3]),
be16_to_cpu(((__be16 *) gid->raw)[4]),
be16_to_cpu(((__be16 *) gid->raw)[5]),
be16_to_cpu(((__be16 *) gid->raw)[6]),
be16_to_cpu(((__be16 *) gid->raw)[7]));
mthca_err(dev, "MGID %pI6 not found\n", gid->raw);
err = -EINVAL;
goto out;
}

15
drivers/infiniband/hw/nes/nes.c
View File

@ -142,14 +142,9 @@ static int nes_inetaddr_event(struct notifier_block *notifier,
struct nes_device *nesdev;
struct net_device *netdev;
struct nes_vnic *nesvnic;
unsigned int addr;
unsigned int mask;
addr = ntohl(ifa->ifa_address);
mask = ntohl(ifa->ifa_mask);
nes_debug(NES_DBG_NETDEV, "nes_inetaddr_event: ip address " NIPQUAD_FMT
", netmask " NIPQUAD_FMT ".\n",
HIPQUAD(addr), HIPQUAD(mask));
nes_debug(NES_DBG_NETDEV, "nes_inetaddr_event: ip address %pI4, netmask %pI4.\n",
&ifa->ifa_address, &ifa->ifa_mask);
list_for_each_entry(nesdev, &nes_dev_list, list) {
nes_debug(NES_DBG_NETDEV, "Nesdev list entry = 0x%p. (%s)\n",
nesdev, nesdev->netdev[0]->name);
@ -360,10 +355,8 @@ struct ib_qp *nes_get_qp(struct ib_device *device, int qpn)
*/
static void nes_print_macaddr(struct net_device *netdev)
{
DECLARE_MAC_BUF(mac);
nes_debug(NES_DBG_INIT, "%s: %s, IRQ %u\n",
netdev->name, print_mac(mac, netdev->dev_addr), netdev->irq);
nes_debug(NES_DBG_INIT, "%s: %pM, IRQ %u\n",
netdev->name, netdev->dev_addr, netdev->irq);
}
/**

31
drivers/infiniband/hw/nes/nes_cm.c
View File

@ -782,8 +782,8 @@ static struct nes_cm_node *find_node(struct nes_cm_core *cm_core,
/* get a handle on the hte */
hte = &cm_core->connected_nodes;
nes_debug(NES_DBG_CM, "Searching for an owner node: " NIPQUAD_FMT ":%x from core %p->%p\n",
HIPQUAD(loc_addr), loc_port, cm_core, hte);
nes_debug(NES_DBG_CM, "Searching for an owner node: %pI4:%x from core %p->%p\n",
&loc_addr, loc_port, cm_core, hte);
/* walk list and find cm_node associated with this session ID */
spin_lock_irqsave(&cm_core->ht_lock, flags);
@ -832,8 +832,8 @@ static struct nes_cm_listener *find_listener(struct nes_cm_core *cm_core,
}
spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
nes_debug(NES_DBG_CM, "Unable to find listener for " NIPQUAD_FMT ":%x\n",
HIPQUAD(dst_addr), dst_port);
nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n",
&dst_addr, dst_port);
/* no listener */
return NULL;
@ -988,7 +988,6 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip)
struct flowi fl;
struct neighbour *neigh;
int rc = -1;
DECLARE_MAC_BUF(mac);
memset(&fl, 0, sizeof fl);
fl.nl_u.ip4_u.daddr = htonl(dst_ip);
@ -1002,8 +1001,8 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip)
if (neigh) {
if (neigh->nud_state & NUD_VALID) {
nes_debug(NES_DBG_CM, "Neighbor MAC address for 0x%08X"
" is %s, Gateway is 0x%08X \n", dst_ip,
print_mac(mac, neigh->ha), ntohl(rt->rt_gateway));
" is %pM, Gateway is 0x%08X \n", dst_ip,
neigh->ha, ntohl(rt->rt_gateway));
nes_manage_arp_cache(nesvnic->netdev, neigh->ha,
dst_ip, NES_ARP_ADD);
rc = nes_arp_table(nesvnic->nesdev, dst_ip, NULL,
@ -1032,7 +1031,6 @@ static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core,
int arpindex = 0;
struct nes_device *nesdev;
struct nes_adapter *nesadapter;
DECLARE_MAC_BUF(mac);
/* create an hte and cm_node for this instance */
cm_node = kzalloc(sizeof(*cm_node), GFP_ATOMIC);
@ -1045,10 +1043,9 @@ static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core,
cm_node->loc_port = cm_info->loc_port;
cm_node->rem_port = cm_info->rem_port;
cm_node->send_write0 = send_first;
nes_debug(NES_DBG_CM, "Make node addresses : loc = " NIPQUAD_FMT
":%x, rem = " NIPQUAD_FMT ":%x\n",
HIPQUAD(cm_node->loc_addr), cm_node->loc_port,
HIPQUAD(cm_node->rem_addr), cm_node->rem_port);
nes_debug(NES_DBG_CM, "Make node addresses : loc = %pI4:%x, rem = %pI4:%x\n",
&cm_node->loc_addr, cm_node->loc_port,
&cm_node->rem_addr, cm_node->rem_port);
cm_node->listener = listener;
cm_node->netdev = nesvnic->netdev;
cm_node->cm_id = cm_info->cm_id;
@ -1101,8 +1098,8 @@ static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core,
/* copy the mac addr to node context */
memcpy(cm_node->rem_mac, nesadapter->arp_table[arpindex].mac_addr, ETH_ALEN);
nes_debug(NES_DBG_CM, "Remote mac addr from arp table: %s\n",
print_mac(mac, cm_node->rem_mac));
nes_debug(NES_DBG_CM, "Remote mac addr from arp table: %pM\n",
cm_node->rem_mac);
add_hte_node(cm_core, cm_node);
atomic_inc(&cm_nodes_created);
@ -2077,10 +2074,8 @@ static int mini_cm_recv_pkt(struct nes_cm_core *cm_core,
nfo.rem_addr = ntohl(iph->saddr);
nfo.rem_port = ntohs(tcph->source);
nes_debug(NES_DBG_CM, "Received packet: dest=" NIPQUAD_FMT
":0x%04X src=" NIPQUAD_FMT ":0x%04X\n",
NIPQUAD(iph->daddr), tcph->dest,
NIPQUAD(iph->saddr), tcph->source);
nes_debug(NES_DBG_CM, "Received packet: dest=%pI4:0x%04X src=%pI4:0x%04X\n",
&iph->daddr, tcph->dest, &iph->saddr, tcph->source);
do {
cm_node = find_node(cm_core,

2
drivers/infiniband/hw/nes/nes_hw.c
View File

@ -2541,7 +2541,7 @@ static void nes_nic_napi_ce_handler(struct nes_device *nesdev, struct nes_hw_nic
{
struct nes_vnic *nesvnic = container_of(cq, struct nes_vnic, nic_cq);
netif_rx_schedule(nesdev->netdev[nesvnic->netdev_index], &nesvnic->napi);
netif_rx_schedule(&nesvnic->napi);
}

13
drivers/infiniband/hw/nes/nes_nic.c
View File

@ -99,7 +99,6 @@ static int nics_per_function = 1;
static int nes_netdev_poll(struct napi_struct *napi, int budget)
{
struct nes_vnic *nesvnic = container_of(napi, struct nes_vnic, napi);
struct net_device *netdev = nesvnic->netdev;
struct nes_device *nesdev = nesvnic->nesdev;
struct nes_hw_nic_cq *nescq = &nesvnic->nic_cq;
@ -112,7 +111,7 @@ static int nes_netdev_poll(struct napi_struct *napi, int budget)
nes_nic_ce_handler(nesdev, nescq);
if (nescq->cqes_pending == 0) {
netif_rx_complete(netdev, napi);
netif_rx_complete(napi);
/* clear out completed cqes and arm */
nes_write32(nesdev->regs+NES_CQE_ALLOC, NES_CQE_ALLOC_NOTIFY_NEXT |
nescq->cq_number | (nescq->cqe_allocs_pending << 16));
@ -797,14 +796,13 @@ static int nes_netdev_set_mac_address(struct net_device *netdev, void *p)
int i;
u32 macaddr_low;
u16 macaddr_high;
DECLARE_MAC_BUF(mac);
if (!is_valid_ether_addr(mac_addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(netdev->dev_addr, mac_addr->sa_data, netdev->addr_len);
printk(PFX "%s: Address length = %d, Address = %s\n",
__func__, netdev->addr_len, print_mac(mac, mac_addr->sa_data));
printk(PFX "%s: Address length = %d, Address = %pM\n",
__func__, netdev->addr_len, mac_addr->sa_data);
macaddr_high = ((u16)netdev->dev_addr[0]) << 8;
macaddr_high += (u16)netdev->dev_addr[1];
macaddr_low = ((u32)netdev->dev_addr[2]) << 24;
@ -909,9 +907,8 @@ static void nes_netdev_set_multicast_list(struct net_device *netdev)
if (mc_index >= max_pft_entries_avaiable)
break;
if (multicast_addr) {
DECLARE_MAC_BUF(mac);
nes_debug(NES_DBG_NIC_RX, "Assigning MC Address %s to register 0x%04X nic_idx=%d\n",
print_mac(mac, multicast_addr->dmi_addr),
nes_debug(NES_DBG_NIC_RX, "Assigning MC Address %pM to register 0x%04X nic_idx=%d\n",
multicast_addr->dmi_addr,
perfect_filter_register_address+(mc_index * 8),
mc_nic_index);
macaddr_high = ((u16)multicast_addr->dmi_addr[0]) << 8;

5
drivers/infiniband/hw/nes/nes_utils.c
View File

@ -682,9 +682,8 @@ int nes_arp_table(struct nes_device *nesdev, u32 ip_addr, u8 *mac_addr, u32 acti
/* DELETE or RESOLVE */
if (arp_index == nesadapter->arp_table_size) {
nes_debug(NES_DBG_NETDEV, "MAC for " NIPQUAD_FMT " not in ARP table - cannot %s\n",
HIPQUAD(ip_addr),
action == NES_ARP_RESOLVE ? "resolve" : "delete");
nes_debug(NES_DBG_NETDEV, "MAC for %pI4 not in ARP table - cannot %s\n",
&ip_addr, action == NES_ARP_RESOLVE ? "resolve" : "delete");
return -1;
}

Some files were not shown because too many files have changed in this diff Show More