OMAP: panda: move display init from board file to dss-common.c
Device tree support for omapdss is still some way in the future. In an effort to get a minimal DSS support for DT enabled kernel on selected OMAP4 boards, we'll go for a temporary solution: We will call the same non-DT omapdss setup code for OMAP4 SDP and Pandaboards from board-generic.c, thus enabling DSS for those boards. This patch moves the display setup code from board-omap4panda.c to dss-common.c. dss-common.c will be called by the board-omap4panda.c when running on non-DT kernel, and by board-generic.c when running on DT enabled kernel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>hifive-unleashed-5.1
parent
cc0677979e
commit
0191bf368f
|
@ -279,4 +279,4 @@ endif
|
||||||
emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o
|
emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o
|
||||||
obj-y += $(emac-m) $(emac-y)
|
obj-y += $(emac-m) $(emac-y)
|
||||||
|
|
||||||
obj-y += common-board-devices.o twl-common.o
|
obj-y += common-board-devices.o twl-common.o dss-common.o
|
||||||
|
|
|
@ -36,26 +36,22 @@
|
||||||
#include <asm/mach-types.h>
|
#include <asm/mach-types.h>
|
||||||
#include <asm/mach/arch.h>
|
#include <asm/mach/arch.h>
|
||||||
#include <asm/mach/map.h>
|
#include <asm/mach/map.h>
|
||||||
#include <video/omapdss.h>
|
|
||||||
|
|
||||||
#include "common.h"
|
#include "common.h"
|
||||||
#include <plat/usb.h>
|
#include <plat/usb.h>
|
||||||
#include <plat/mmc.h>
|
#include <plat/mmc.h>
|
||||||
#include <video/omap-panel-tfp410.h>
|
|
||||||
|
|
||||||
#include "soc.h"
|
#include "soc.h"
|
||||||
#include "hsmmc.h"
|
#include "hsmmc.h"
|
||||||
#include "control.h"
|
#include "control.h"
|
||||||
#include "mux.h"
|
#include "mux.h"
|
||||||
#include "common-board-devices.h"
|
#include "common-board-devices.h"
|
||||||
|
#include "dss-common.h"
|
||||||
|
|
||||||
#define GPIO_HUB_POWER 1
|
#define GPIO_HUB_POWER 1
|
||||||
#define GPIO_HUB_NRESET 62
|
#define GPIO_HUB_NRESET 62
|
||||||
#define GPIO_WIFI_PMENA 43
|
#define GPIO_WIFI_PMENA 43
|
||||||
#define GPIO_WIFI_IRQ 53
|
#define GPIO_WIFI_IRQ 53
|
||||||
#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
|
|
||||||
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
|
|
||||||
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
|
|
||||||
|
|
||||||
/* wl127x BT, FM, GPS connectivity chip */
|
/* wl127x BT, FM, GPS connectivity chip */
|
||||||
static struct ti_st_plat_data wilink_platform_data = {
|
static struct ti_st_plat_data wilink_platform_data = {
|
||||||
|
@ -409,68 +405,6 @@ static struct omap_board_mux board_mux[] __initdata = {
|
||||||
#define board_mux NULL
|
#define board_mux NULL
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/* Display DVI */
|
|
||||||
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
|
|
||||||
|
|
||||||
/* Using generic display panel */
|
|
||||||
static struct tfp410_platform_data omap4_dvi_panel = {
|
|
||||||
.i2c_bus_num = 3,
|
|
||||||
.power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_device omap4_panda_dvi_device = {
|
|
||||||
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
||||||
.name = "dvi",
|
|
||||||
.driver_name = "tfp410",
|
|
||||||
.data = &omap4_dvi_panel,
|
|
||||||
.phy.dpi.data_lines = 24,
|
|
||||||
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
|
|
||||||
.channel = OMAP_DSS_CHANNEL_LCD2,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
|
|
||||||
.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
|
|
||||||
.ls_oe_gpio = HDMI_GPIO_LS_OE,
|
|
||||||
.hpd_gpio = HDMI_GPIO_HPD,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_device omap4_panda_hdmi_device = {
|
|
||||||
.name = "hdmi",
|
|
||||||
.driver_name = "hdmi_panel",
|
|
||||||
.type = OMAP_DISPLAY_TYPE_HDMI,
|
|
||||||
.channel = OMAP_DSS_CHANNEL_DIGIT,
|
|
||||||
.data = &omap4_panda_hdmi_data,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_device *omap4_panda_dss_devices[] = {
|
|
||||||
&omap4_panda_dvi_device,
|
|
||||||
&omap4_panda_hdmi_device,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_board_info omap4_panda_dss_data = {
|
|
||||||
.num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
|
|
||||||
.devices = omap4_panda_dss_devices,
|
|
||||||
.default_device = &omap4_panda_dvi_device,
|
|
||||||
};
|
|
||||||
|
|
||||||
static void __init omap4_panda_display_init(void)
|
|
||||||
{
|
|
||||||
|
|
||||||
omap_display_init(&omap4_panda_dss_data);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
|
|
||||||
* later have external pull up on the HDMI I2C lines
|
|
||||||
*/
|
|
||||||
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
|
|
||||||
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
|
|
||||||
else
|
|
||||||
omap_hdmi_init(0);
|
|
||||||
|
|
||||||
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
|
|
||||||
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
|
|
||||||
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void omap4_panda_init_rev(void)
|
static void omap4_panda_init_rev(void)
|
||||||
{
|
{
|
||||||
|
|
|
@ -0,0 +1,104 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2012 Texas Instruments, Inc..
|
||||||
|
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License
|
||||||
|
* version 2 as published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful, but
|
||||||
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||||
|
* General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
||||||
|
* 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* NOTE: this is a transitional file to help with DT adaptation.
|
||||||
|
* This file will be removed when DSS supports DT.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <video/omapdss.h>
|
||||||
|
#include <video/omap-panel-tfp410.h>
|
||||||
|
|
||||||
|
#include <plat/cpu.h>
|
||||||
|
|
||||||
|
#include "dss-common.h"
|
||||||
|
#include "mux.h"
|
||||||
|
|
||||||
|
#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
|
||||||
|
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
|
||||||
|
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
|
||||||
|
|
||||||
|
/* Display DVI */
|
||||||
|
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
|
||||||
|
|
||||||
|
/* Using generic display panel */
|
||||||
|
static struct tfp410_platform_data omap4_dvi_panel = {
|
||||||
|
.i2c_bus_num = 3,
|
||||||
|
.power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_device omap4_panda_dvi_device = {
|
||||||
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
||||||
|
.name = "dvi",
|
||||||
|
.driver_name = "tfp410",
|
||||||
|
.data = &omap4_dvi_panel,
|
||||||
|
.phy.dpi.data_lines = 24,
|
||||||
|
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
|
||||||
|
.channel = OMAP_DSS_CHANNEL_LCD2,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
|
||||||
|
.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
|
||||||
|
.ls_oe_gpio = HDMI_GPIO_LS_OE,
|
||||||
|
.hpd_gpio = HDMI_GPIO_HPD,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_device omap4_panda_hdmi_device = {
|
||||||
|
.name = "hdmi",
|
||||||
|
.driver_name = "hdmi_panel",
|
||||||
|
.type = OMAP_DISPLAY_TYPE_HDMI,
|
||||||
|
.channel = OMAP_DSS_CHANNEL_DIGIT,
|
||||||
|
.data = &omap4_panda_hdmi_data,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_device *omap4_panda_dss_devices[] = {
|
||||||
|
&omap4_panda_dvi_device,
|
||||||
|
&omap4_panda_hdmi_device,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_board_info omap4_panda_dss_data = {
|
||||||
|
.num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
|
||||||
|
.devices = omap4_panda_dss_devices,
|
||||||
|
.default_device = &omap4_panda_dvi_device,
|
||||||
|
};
|
||||||
|
|
||||||
|
void __init omap4_panda_display_init(void)
|
||||||
|
{
|
||||||
|
omap_display_init(&omap4_panda_dss_data);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
|
||||||
|
* later have external pull up on the HDMI I2C lines
|
||||||
|
*/
|
||||||
|
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
|
||||||
|
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
|
||||||
|
else
|
||||||
|
omap_hdmi_init(0);
|
||||||
|
|
||||||
|
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
|
||||||
|
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
|
||||||
|
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
|
||||||
|
}
|
||||||
|
|
||||||
|
void __init omap4_panda_display_init_of(void)
|
||||||
|
{
|
||||||
|
omap_display_init(&omap4_panda_dss_data);
|
||||||
|
}
|
|
@ -0,0 +1,12 @@
|
||||||
|
#ifndef __OMAP_DSS_COMMON__
|
||||||
|
#define __OMAP_DSS_COMMON__
|
||||||
|
|
||||||
|
/*
|
||||||
|
* NOTE: this is a transitional file to help with DT adaptation.
|
||||||
|
* This file will be removed when DSS supports DT.
|
||||||
|
*/
|
||||||
|
|
||||||
|
void __init omap4_panda_display_init(void);
|
||||||
|
void __init omap4_panda_display_init_of(void);
|
||||||
|
|
||||||
|
#endif
|
Loading…
Reference in New Issue