redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

Samsung DT update for 3.18

Browse source 
- un-use slot-node and deprecate the supports-highspped
   for dw-mmc
 - remove old USB2 PHY node for exynos5250
 
 - exynos4412-odroid-common
   enable PMIC interrupt and i2c improvements
 
 - exynos5250-snow
   fold exynos5250-cros-common
   update display related nodes
 
 - Peach Pit and Pi
   improve power scheme, add support max77802 PMIC,
   add hdmi regulators add thermistor, ISL29018 sensor,
   set i2c clock at 400kHz, add support Atmel touchpad,
   update display related nodes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJUGLrUAAoJEA0Cl+kVi2xqpTgQAKXkcDw25ITAB/50rpnV0oi0
 qtM8sUA7MuZgtOA0ymQwV2/xGKei+KKYLT14Sgs8UWvQTGYBpj5p8xug35KP0e7Y
 ndpc3I6K9Jx1D3ICu9aEhbuIPNLGxGhxMhcVLrRoH0UTqgQkH2AUpEADuR43HZx7
 jD4wyJZtLhnKoiN8mPWto5tHXAUBG4iKHGYGkubfEGZUk1tHCbV6sBi1+6Dmc/gZ
 QmBrhbB69iSe2Rvza/s7XCTafV18AW7XiWjm/Un3C4ARdZ28YUD6o0Dqb/ol6Eoc
 rmyMxgNUyrabJrvrN9HUi6oXNGWcPl6a3oJoCoL0PL+9ks6pPRST+7rDCN5+a73Z
 xlNl1EiiwHpgXbDufQESMglhV63aJ9BCRpYrj3n2nkJc42qyJNfldjMlKacObqKd
 4S3sTIpfLI6WAk+7/RL47w9MMZtWtWOnJW4hgZ9OGiaRQe+i3lP2X/KYrsZcu/Zm
 ZSMjVSOPc1w+9KxHTbuhsqaHeeDEJRn4eg4xSs6jfCE93l+5qnSQqR0NMQuRtqVk
 4cL0AmowQUHX5dImKpBIg+CuMOvTayBG7ZvhPZSMCCDqm3fEhP5rmsh+NL0UozvH
 9+j9NZV0ZJ3Y+7xzbkww0K04sNKU9ojcj5GYaNYq0QEOM0DtKBlcdSaVyF4ANtJe
 Vv7zahRq1Ub2avVGQYd8
 =aaca
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Pull "Samsung DT update for 3.18" from Kukjin Kim:

- un-use slot-node and deprecate the supports-highspped
  for dw-mmc
- remove old USB2 PHY node for exynos5250

- exynos4412-odroid-common
  enable PMIC interrupt and i2c improvements

- exynos5250-snow
  fold exynos5250-cros-common
  update display related nodes

- Peach Pit and Pi
  improve power scheme, add support max77802 PMIC,
  add hdmi regulators add thermistor, ISL29018 sensor,
  set i2c clock at 400kHz, add support Atmel touchpad,
  update display related nodes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: remove old USB2 PHY node for exynos5250
  ARM: dts: remove old USB2 PHY node hook for exynos5250-arndale
  ARM: dts: update display related nodes for exynos5800-peach-pi
  ARM: dts: update display related nodes for exynos5420-peach-pit
  ARM: dts: update display related nodes for exynos5250-snow
  ARM: dts: Add support Atmel touchpad for exynos5800-peach-pi
  ARM: dts: Add support Atmel touchpad for exynos5420-peach-pit
  ARM: dts: Set i2c7 clock at 400kHz for exynos based Peach boards
  ARM: dts: Add ISL29018 sensor for exynos based Peach boards
  ARM: dts: Add thermistor dts fragment used by exynos based Peach boards
  ARM: dts: add hdmi regulators for exynos5420-peach-pit
  ARM: dts: add hdmi regulators for exynos5800-peach-pi
  ARM: dts: Add support max77802 PMIC for exynos based Peach boards
  ARM: dts: Improve Peach Pit and Pi power scheme
  ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
  ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
  ARM: dts: Fix MMC pinctrl for exynos5250-snow
  ARM: dts: ODROID i2c improvements for exynos4412-odroid-common
  ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common
This commit is contained in:
Arnd Bergmann 2014-09-26 00:51:53 +02:00
parent 8446cef1ca 9b02732643
commit 01eacbb84c
15 changed files with 1117 additions and 387 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

44
arch/arm/boot/dts/cros-adc-thermistors.dtsi Normal file
View file

@ -0,0 +1,44 @@
/*
* Thermistor dts fragment for devices that use Thermistors as
* children of the IIO based ADC.
*
* Currently, used by Exynos5420 based Peach PIT and
* Exynos5800 based Peach PI.
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
&adc {
ncp15wb473@3 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 3>;
};
ncp15wb473@4 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
};
ncp15wb473@5 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 5>;
};
ncp15wb473@6 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 6>;
};
};

8
arch/arm/boot/dts/exynos4412-odroid-common.dtsi
View file

@ -54,17 +54,13 @@
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
watchdog@10060000 {

8
arch/arm/boot/dts/exynos4412-origen.dts
View file

@ -137,17 +137,13 @@
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
codec@13400000 {

8
arch/arm/boot/dts/exynos4412-trats2.dts
View file

@ -520,7 +520,6 @@
mmc@12550000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
non-removable;
card-detect-delay = <200>;
@ -532,11 +531,8 @@
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
serial@13800000 {

22
arch/arm/boot/dts/exynos5250-arndale.dts
View file

@ -401,7 +401,6 @@
mmc_0: mmc@12200000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
@ -410,17 +409,13 @@
vmmc-supply = <&mmc_reg>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
mmc_2: mmc@12220000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@ -428,12 +423,9 @@
vmmc-supply = <&mmc_reg>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
};
i2s0: i2s@03830000 {
@ -570,8 +562,4 @@
connect-gpios = <&gpd1 7 1>;
};
};
usb@12110000 {
usb-phy = <&usb2_phy>;
};
};

164
arch/arm/boot/dts/exynos5250-cros-common.dtsi
View file

@ -1,164 +0,0 @@
/*
* Common device tree include for all Exynos 5250 boards based off of Daisy.
*
* Copyright (c) 2012 Google, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
aliases {
};
memory {
reg = <0x40000000 0x80000000>;
};
chosen {
};
pinctrl@11400000 {
/*
* Disabled pullups since external part has its own pullups and
* double-pulling gets us out of spec in some cases.
*/
i2c2_bus: i2c2-bus {
samsung,pin-pud = <0>;
};
};
i2c@12C60000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
};
i2c@12C70000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
};
i2c@12C80000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
};
};
i2c@12C90000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
i2c@12CA0000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
i2c@12CB0000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
i2c@12CD0000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
i2c@12CE0000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
hdmiphy: hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
};
mmc@12200000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
};
mmc@12220000 {
num-slots = <1>;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
wp-gpios = <&gpc2 1 0>;
};
};
mmc@12230000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
/* See board-specific dts files for pin setup */
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
spi_1: spi@12d30000 {
status = "okay";
samsung,spi-src-clk = <0>;
num-cs = <1>;
};
hdmi {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
phy = <&hdmiphy>;
ddc = <&i2c_2>;
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpx1 3 1>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
};
};

18
arch/arm/boot/dts/exynos5250-smdk5250.dts
View file

@ -284,7 +284,6 @@
mmc@12200000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
@ -292,29 +291,22 @@
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
mmc@12220000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
};
spi_1: spi@12d30000 {

195
arch/arm/boot/dts/exynos5250-snow.dts
View file

@ -9,8 +9,8 @@
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "exynos5250.dtsi"
#include "exynos5250-cros-common.dtsi"
/ {
model = "Google Snow";
@ -20,6 +20,13 @@
i2c104 = &i2c_104;
};
memory {
reg = <0x40000000 0x80000000>;
};
chosen {
};
rtc@101E0000 {
status = "okay";
};
@ -93,6 +100,13 @@
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpx1 3 1>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
gpios = <&gpx3 5 1>;
@ -181,7 +195,7 @@
dcdc3 {
ti,enable-ext-control;
};
fet1 {
fet1: fet1 {
regulator-name = "vcd_led";
ti,overcurrent-wait = <3>;
};
@ -204,7 +218,7 @@
regulator-always-on;
ti,overcurrent-wait = <3>;
};
fet6 {
fet6: fet6 {
regulator-name = "lcd_vdd";
ti,overcurrent-wait = <3>;
};
@ -226,26 +240,6 @@
};
};
mmc@12200000 {
status = "okay";
};
mmc@12220000 {
status = "okay";
};
/*
* On Snow we've got SIP WiFi and so can keep drive strengths low to
* reduce EMI.
*/
mmc@12230000 {
status = "okay";
slot@0 {
pinctrl-names = "default";
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
};
};
i2c@12CD0000 {
max98095: codec@11 {
compatible = "maxim,max98095";
@ -253,6 +247,15 @@
pinctrl-0 = <&max98095_en>;
pinctrl-names = "default";
};
ptn3460: lvds-bridge@20 {
compatible = "nxp,ptn3460";
reg = <0x20>;
powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
edid-emulation = <5>;
panel = <&panel>;
};
};
i2s0: i2s@03830000 {
@ -294,17 +297,24 @@
};
hdmi {
hpd-gpio = <&gpx3 7 0>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
phy = <&hdmiphy>;
ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
};
backlight {
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
power-supply = <&fet1>;
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
@ -314,6 +324,12 @@
samsung,invert-vclk;
};
panel: panel {
compatible = "auo,b116xw03";
power-supply = <&fet6>;
backlight = <&backlight>;
};
dp-controller@145B0000 {
status = "okay";
pinctrl-names = "default";
@ -325,26 +341,15 @@
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx0 7 0>;
display-timings {
native-mode = <&timing1>;
timing1: timing@1 {
clock-frequency = <70589280>;
hactive = <1366>;
vactive = <768>;
hfront-porch = <40>;
hback-porch = <40>;
hsync-len = <32>;
vback-porch = <10>;
vfront-porch = <12>;
vsync-len = <6>;
};
};
bridge = <&ptn3460>;
};
};
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
@ -491,6 +496,10 @@
};
&i2c_1 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
@ -500,6 +509,106 @@
};
};
/*
* Disabled pullups since external part has its own pullups and
* double-pulling gets us out of spec in some cases.
*/
&i2c2_bus {
samsung,pin-pud = <0>;
};
&i2c_2 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
};
};
&i2c_3 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
&i2c_4 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
&i2c_5 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
&i2c_7 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
&i2c_8 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
hdmiphy: hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
};
&mmc_0 {
status = "okay";
num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
bus-width = <8>;
cap-mmc-highspeed;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
bus-width = <4>;
wp-gpios = <&gpc2 1 0>;
cap-sd-highspeed;
};
/*
* On Snow we've got SIP WiFi and so can keep drive strengths low to
* reduce EMI.
*/
&mmc_3 {
status = "okay";
num-slots = <1>;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
bus-width = <4>;
cap-sd-highspeed;
};
&pinctrl_0 {
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
@ -509,4 +618,10 @@
};
};
&spi_1 {
status = "okay";
samsung,spi-src-clk = <0>;
num-cs = <1>;
};
#include "cros-ec-keyboard.dtsi"

15
arch/arm/boot/dts/exynos5250.dtsi
View file

@ -603,21 +603,6 @@
};
};
usb2_phy: usbphy@12130000 {
compatible = "samsung,exynos5250-usb2phy";
reg = <0x12130000 0x100>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
clock-names = "ext_xtal", "usbhost";
#address-cells = <1>;
#size-cells = <1>;
ranges;
usbphy-sys {
reg = <0x10040704 0x8>,
<0x10050230 0x4>;
};
};
usb2_phy_gen: phy@12130000 {
compatible = "samsung,exynos5250-usb2-phy";
reg = <0x12130000 0x100>;

18
arch/arm/boot/dts/exynos5260-xyref5260.dts
View file

@ -69,7 +69,7 @@
num-slots = <1>;
broken-cd;
bypass-smu;
supports-highspeed;
cap-mmc-highspeed;
supports-hs200-mode; /* 200 Mhz */
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
@ -77,27 +77,19 @@
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
bus-width = <4>;
disable-wp;
};

18
arch/arm/boot/dts/exynos5410-smdk5410.dts
View file

@ -40,33 +40,25 @@
&mmc_0 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-mmc-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
bus-width = <4>;
disable-wp;
};
&uart0 {

16
arch/arm/boot/dts/exynos5420-arndale-octa.dts
View file

@ -50,7 +50,6 @@
mmc@12200000 {
status = "okay";
broken-cd;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
@ -58,16 +57,12 @@
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
mmc@12220000 {
status = "okay";
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@ -75,11 +70,8 @@
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
cap-sd-highspeed;
};
hsi2c_4: i2c@12CA0000 {

482
arch/arm/boot/dts/exynos5420-peach-pit.dts
View file

@ -11,6 +11,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5420.dtsi"
/ {
@ -30,11 +31,12 @@
i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
};
backlight {
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
power-supply = <&tps65090_fet1>;
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
@ -100,6 +102,17 @@
regulator-boot-on;
regulator-always-on;
};
panel: panel {
compatible = "auo,b116xw03";
power-supply = <&tps65090_fet6>;
backlight = <&backlight>;
};
};
&adc {
status = "okay";
vdd-supply = <&ldo9_reg>;
};
&dp {
@ -113,22 +126,7 @@
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx2 6 0>;
display-timings {
native-mode = <&timing1>;
timing1: timing@1 {
clock-frequency = <70589280>;
hactive = <1366>;
vactive = <768>;
hfront-porch = <40>;
hback-porch = <40>;
hsync-len = <32>;
vback-porch = <10>;
vfront-porch = <12>;
vsync-len = <6>;
};
};
bridge = <&ps8625>;
};
&fimd {
@ -142,10 +140,348 @@
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
};
&hsi2c_4 {
status = "okay";
clock-frequency = <400000>;
max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
<&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
wakeup-source;
reg = <0x9>;
#clock-cells = <1>;
inb1-supply = <&tps65090_dcdc2>;
inb2-supply = <&tps65090_dcdc1>;
inb3-supply = <&tps65090_dcdc2>;
inb4-supply = <&tps65090_dcdc2>;
inb5-supply = <&tps65090_dcdc1>;
inb6-supply = <&tps65090_dcdc2>;
inb7-supply = <&tps65090_dcdc1>;
inb8-supply = <&tps65090_dcdc1>;
inb9-supply = <&tps65090_dcdc1>;
inb10-supply = <&tps65090_dcdc1>;
inl1-supply = <&buck5_reg>;
inl2-supply = <&buck7_reg>;
inl3-supply = <&buck9_reg>;
inl4-supply = <&buck9_reg>;
inl5-supply = <&buck9_reg>;
inl6-supply = <&tps65090_dcdc2>;
inl7-supply = <&buck9_reg>;
inl9-supply = <&tps65090_dcdc2>;
inl10-supply = <&buck7_reg>;
regulators {
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck5_reg: BUCK5 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "vdd_kfc";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck7_reg: BUCK7 {
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck8_reg: BUCK8 {
regulator-name = "vdd_emmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
};
buck9_reg: BUCK9 {
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-boot-on;
};
buck10_reg: BUCK10 {
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo1_reg: LDO1 {
regulator-name = "vdd_1v0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "vdd_1v2_2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo3_reg: LDO3 {
regulator-name = "vdd_1v8_3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vqmmc_sdcard: ldo4_reg: LDO4 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo5_reg: LDO5 {
regulator-name = "vdd_1v8_5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "vdd_1v8_6";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "vdd_1v8_7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo8_reg: LDO8 {
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo9_reg: LDO9 {
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo13_reg: LDO13 {
regulator-name = "vdd_ldo13";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo14_reg: LDO14 {
regulator-name = "vdd_ldo14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "vdd_g3ds";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
};
ldo18_reg: LDO18 {
regulator-name = "ldo_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo19_reg: LDO19 {
regulator-name = "ldo_19";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo20_reg: LDO20 {
regulator-name = "ldo_20";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo21_reg: LDO21 {
regulator-name = "ldo_21";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo23_reg: LDO23 {
regulator-name = "ldo_23";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo24_reg: LDO24 {
regulator-name = "ldo_24";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo25_reg: LDO25 {
regulator-name = "ldo_25";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo26_reg: LDO26 {
regulator-name = "ldo_26";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo27_reg: LDO27 {
regulator-name = "ldo_27";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo28_reg: LDO28 {
regulator-name = "ldo_28";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo29_reg: LDO29 {
regulator-name = "ldo_29";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo30_reg: LDO30 {
regulator-name = "vdd_mifs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo32_reg: LDO32 {
regulator-name = "ldo_32";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo33_reg: LDO33 {
regulator-name = "ldo_33";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo34_reg: LDO34 {
regulator-name = "ldo_34";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo35_reg: LDO35 {
regulator-name = "ldo_35";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
};
};
&hsi2c_7 {
status = "okay";
clock-frequency = <400000>;
max98090: codec@10 {
compatible = "maxim,max98090";
@ -155,6 +491,44 @@
pinctrl-names = "default";
pinctrl-0 = <&max98090_irq>;
};
light-sensor@44 {
compatible = "isil,isl29018";
reg = <0x44>;
vcc-supply = <&tps65090_fet5>;
};
ps8625: lvds-bridge@48 {
compatible = "parade,ps8625";
reg = <0x48>;
sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
lane-count = <2>;
panel = <&panel>;
use-external-pwm;
};
};
&hsi2c_8 {
status = "okay";
clock-frequency = <333000>;
/* Atmel mXT336S */
trackpad@4b {
compatible = "atmel,maxtouch";
reg = <0x4b>;
interrupt-parent = <&gpx1>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
pinctrl-names = "default";
pinctrl-0 = <&trackpad_irq>;
linux,gpio-keymap = <KEY_RESERVED
KEY_RESERVED
KEY_RESERVED /* GPIO0 */
KEY_RESERVED /* GPIO1 */
KEY_RESERVED /* GPIO2 */
BTN_LEFT>; /* GPIO3 */
};
};
&hsi2c_9 {
@ -187,7 +561,7 @@
num-slots = <1>;
broken-cd;
caps2-mmc-hs200-1_8v;
supports-highspeed;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
clock-frequency = <400000000>;
@ -196,17 +570,13 @@
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <3>;
@ -214,11 +584,7 @@
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
};
@ -249,6 +615,13 @@
samsung,pin-drv = <0>;
};
trackpad_irq: trackpad-irq {
samsung,pins = "gpx1-1";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
power_key_irq: power-key-irq {
samsung,pins = "gpx1-2";
samsung,pin-function = <0>;
@ -277,12 +650,42 @@
samsung,pin-drv = <0>;
};
max77802_irq: max77802-irq {
samsung,pins = "gpx3-1";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
pmic_dvs_1: pmic-dvs-1 {
samsung,pins = "gpy7-6";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&pinctrl_2 {
pmic_dvs_2: pmic-dvs-2 {
samsung,pins = "gpj4-2";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pmic_dvs_3: pmic-dvs-3 {
samsung,pins = "gpj4-3";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&pinctrl_3 {
@ -312,6 +715,14 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pmic_selb: pmic-selb {
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
"gph0-6";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&rtc {
@ -365,12 +776,12 @@
vsys2-supply = <&vbat>;
vsys3-supply = <&vbat>;
infet1-supply = <&vbat>;
infet2-supply = <&vbat>;
infet3-supply = <&vbat>;
infet4-supply = <&vbat>;
infet5-supply = <&vbat>;
infet6-supply = <&vbat>;
infet7-supply = <&vbat>;
infet2-supply = <&tps65090_dcdc1>;
infet3-supply = <&tps65090_dcdc2>;
infet4-supply = <&tps65090_dcdc2>;
infet5-supply = <&tps65090_dcdc2>;
infet6-supply = <&tps65090_dcdc2>;
infet7-supply = <&tps65090_dcdc1>;
vsys-l1-supply = <&vbat>;
vsys-l2-supply = <&vbat>;
@ -445,3 +856,4 @@
};
#include "cros-ec-keyboard.dtsi"
#include "cros-adc-thermistors.dtsi"

16
arch/arm/boot/dts/exynos5420-smdk5420.dts
View file

@ -76,34 +76,26 @@
mmc@12200000 {
status = "okay";
broken-cd;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
mmc@12220000 {
status = "okay";
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
cap-sd-highspeed;
};
dp-controller@145B0000 {

472
arch/arm/boot/dts/exynos5800-peach-pi.dts
View file

@ -11,6 +11,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5800.dtsi"
/ {
@ -28,11 +29,13 @@
i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
};
backlight {
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
power-supply = <&tps65090_fet1>;
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
@ -98,6 +101,17 @@
regulator-boot-on;
regulator-always-on;
};
panel: panel {
compatible = "auo,b133htn01";
power-supply = <&tps65090_fet6>;
backlight = <&backlight>;
};
};
&adc {
status = "okay";
vdd-supply = <&ldo9_reg>;
};
&dp {
@ -111,22 +125,7 @@
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx2 6 0>;
display-timings {
native-mode = <&timing1>;
timing1: timing@1 {
clock-frequency = <150660000>;
hactive = <1920>;
vactive = <1080>;
hfront-porch = <60>;
hback-porch = <172>;
hsync-len = <80>;
vback-porch = <25>;
vfront-porch = <10>;
vsync-len = <10>;
};
};
panel = <&panel>;
};
&fimd {
@ -140,10 +139,348 @@
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
};
&hsi2c_4 {
status = "okay";
clock-frequency = <400000>;
max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
<&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
wakeup-source;
reg = <0x9>;
#clock-cells = <1>;
inb1-supply = <&tps65090_dcdc2>;
inb2-supply = <&tps65090_dcdc1>;
inb3-supply = <&tps65090_dcdc2>;
inb4-supply = <&tps65090_dcdc2>;
inb5-supply = <&tps65090_dcdc1>;
inb6-supply = <&tps65090_dcdc2>;
inb7-supply = <&tps65090_dcdc1>;
inb8-supply = <&tps65090_dcdc1>;
inb9-supply = <&tps65090_dcdc1>;
inb10-supply = <&tps65090_dcdc1>;
inl1-supply = <&buck5_reg>;
inl2-supply = <&buck7_reg>;
inl3-supply = <&buck9_reg>;
inl4-supply = <&buck9_reg>;
inl5-supply = <&buck9_reg>;
inl6-supply = <&tps65090_dcdc2>;
inl7-supply = <&buck9_reg>;
inl9-supply = <&tps65090_dcdc2>;
inl10-supply = <&buck7_reg>;
regulators {
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck5_reg: BUCK5 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "vdd_kfc";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
};
buck7_reg: BUCK7 {
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck8_reg: BUCK8 {
regulator-name = "vdd_emmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
};
buck9_reg: BUCK9 {
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-boot-on;
};
buck10_reg: BUCK10 {
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo1_reg: LDO1 {
regulator-name = "vdd_1v0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "vdd_1v2_2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo3_reg: LDO3 {
regulator-name = "vdd_1v8_3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vqmmc_sdcard: ldo4_reg: LDO4 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo5_reg: LDO5 {
regulator-name = "vdd_1v8_5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "vdd_1v8_6";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "vdd_1v8_7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo8_reg: LDO8 {
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo9_reg: LDO9 {
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo13_reg: LDO13 {
regulator-name = "vdd_ldo13";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo14_reg: LDO14 {
regulator-name = "vdd_ldo14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "vdd_g3ds";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
};
ldo18_reg: LDO18 {
regulator-name = "ldo_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo19_reg: LDO19 {
regulator-name = "ldo_19";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo20_reg: LDO20 {
regulator-name = "ldo_20";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo21_reg: LDO21 {
regulator-name = "ldo_21";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo23_reg: LDO23 {
regulator-name = "ldo_23";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo24_reg: LDO24 {
regulator-name = "ldo_24";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo25_reg: LDO25 {
regulator-name = "ldo_25";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo26_reg: LDO26 {
regulator-name = "ldo_26";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo27_reg: LDO27 {
regulator-name = "ldo_27";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo28_reg: LDO28 {
regulator-name = "ldo_28";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo29_reg: LDO29 {
regulator-name = "ldo_29";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo30_reg: LDO30 {
regulator-name = "vdd_mifs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo32_reg: LDO32 {
regulator-name = "ldo_32";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo33_reg: LDO33 {
regulator-name = "ldo_33";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo34_reg: LDO34 {
regulator-name = "ldo_34";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo35_reg: LDO35 {
regulator-name = "ldo_35";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
};
};
&hsi2c_7 {
status = "okay";
clock-frequency = <400000>;
max98091: codec@10 {
compatible = "maxim,max98091";
@ -153,6 +490,33 @@
pinctrl-names = "default";
pinctrl-0 = <&max98091_irq>;
};
light-sensor@44 {
compatible = "isil,isl29018";
reg = <0x44>;
vcc-supply = <&tps65090_fet5>;
};
};
&hsi2c_8 {
status = "okay";
clock-frequency = <333000>;
/* Atmel mXT540S */
trackpad@4b {
compatible = "atmel,maxtouch";
reg = <0x4b>;
interrupt-parent = <&gpx1>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
pinctrl-names = "default";
pinctrl-0 = <&trackpad_irq>;
linux,gpio-keymap = <KEY_RESERVED
KEY_RESERVED
KEY_RESERVED /* GPIO 0 */
KEY_RESERVED /* GPIO 1 */
BTN_LEFT /* GPIO 2 */
KEY_RESERVED>; /* GPIO 3 */
};
};
&hsi2c_9 {
@ -185,7 +549,7 @@
num-slots = <1>;
broken-cd;
caps2-mmc-hs200-1_8v;
supports-highspeed;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
clock-frequency = <400000000>;
@ -194,17 +558,13 @@
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <3>;
@ -212,11 +572,7 @@
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
};
@ -247,6 +603,13 @@
samsung,pin-drv = <0>;
};
trackpad_irq: trackpad-irq {
samsung,pins = "gpx1-1";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
power_key_irq: power-key-irq {
samsung,pins = "gpx1-2";
samsung,pin-function = <0>;
@ -275,12 +638,42 @@
samsung,pin-drv = <0>;
};
max77802_irq: max77802-irq {
samsung,pins = "gpx3-1";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
pmic_dvs_1: pmic-dvs-1 {
samsung,pins = "gpy7-6";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&pinctrl_2 {
pmic_dvs_2: pmic-dvs-2 {
samsung,pins = "gpj4-2";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pmic_dvs_3: pmic-dvs-3 {
samsung,pins = "gpj4-3";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&pinctrl_3 {
@ -310,6 +703,14 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pmic_selb: pmic-selb {
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
"gph0-6";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&rtc {
@ -363,12 +764,12 @@
vsys2-supply = <&vbat>;
vsys3-supply = <&vbat>;
infet1-supply = <&vbat>;
infet2-supply = <&vbat>;
infet3-supply = <&vbat>;
infet4-supply = <&vbat>;
infet5-supply = <&vbat>;
infet6-supply = <&vbat>;
infet7-supply = <&vbat>;
infet2-supply = <&tps65090_dcdc1>;
infet3-supply = <&tps65090_dcdc2>;
infet4-supply = <&tps65090_dcdc2>;
infet5-supply = <&tps65090_dcdc2>;
infet6-supply = <&tps65090_dcdc2>;
infet7-supply = <&tps65090_dcdc1>;
vsys-l1-supply = <&vbat>;
vsys-l2-supply = <&vbat>;
@ -443,3 +844,4 @@
};
#include "cros-ec-keyboard.dtsi"
#include "cros-adc-thermistors.dtsi"