From 0316b05311e777f8044c72a88b966ebae7c7a39f Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 20 Jul 2018 13:58:25 +0200 Subject: [PATCH] MIPS: ath79: get PCIe controller out of reset The ar724x pci driver expects the PCIe controller to be brought out of reset by the bootloader. At least the AVM Fritz 300E bootloader doesn't take care of releasing the different PCIe controller related resets which causes an endless hang as soon as either the PCIE Reset register (0x180f0018) or the PCI Application Control register (0x180f0000) is read from. Do the full "PCIE Root Complex Initialization Sequence" if the PCIe host controller is still in reset during probing. The QCA u-boot sleeps 10ms after the PCIE Application Control bit is set to ready. It has been shown that 10ms might not be enough time if PCIe should be used right after setting the bit. During my tests it took up to 20ms till the link was up. Giving the link up to 100ms should work for all cases. Signed-off-by: Mathias Kresin Signed-off-by: John Crispin Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/19916/ Cc: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org --- arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 1e23c8d587bd..64b58cc48a91 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -12,14 +12,18 @@ #include #include #include +#include #include #include #include +#define AR724X_PCI_REG_APP 0x00 #define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c #define AR724X_PCI_REG_INT_MASK 0x50 +#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0) + #define AR724X_PCI_RESET_LINK_UP BIT(0) #define AR724X_PCI_INT_DEV0 BIT(14) @@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc, apc); } +static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc) +{ + u32 ppl, app; + int wait = 0; + + /* deassert PCIe host controller and PCIe PHY reset */ + ath79_device_reset_clear(AR724X_RESET_PCIE); + ath79_device_reset_clear(AR724X_RESET_PCIE_PHY); + + /* remove the reset of the PCIE PLL */ + ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); + ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET; + ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); + + /* deassert bypass for the PCIE PLL */ + ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); + ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; + ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); + + /* set PCIE Application Control to ready */ + app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP); + app |= AR724X_PCI_APP_LTSSM_ENABLE; + __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP); + + /* wait up to 100ms for PHY link up */ + do { + mdelay(10); + wait++; + } while (wait < 10 && !ar724x_pci_check_link(apc)); +} + static int ar724x_pci_probe(struct platform_device *pdev) { struct ar724x_pci_controller *apc; @@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platform_device *pdev) apc->pci_controller.io_resource = &apc->io_res; apc->pci_controller.mem_resource = &apc->mem_res; + /* + * Do the full PCIE Root Complex Initialization Sequence if the PCIe + * host controller is in reset. + */ + if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE) + ar724x_pci_hw_init(apc); + apc->link_up = ar724x_pci_check_link(apc); if (!apc->link_up) dev_warn(&pdev->dev, "PCIe link is down\n");