1
0
Fork 0

arm64: Extend early page table code to allow for larger kernels

Currently the early assembler page table code assumes that precisely
1xpgd, 1xpud, 1xpmd are sufficient to represent the early kernel text
mappings.

Unfortunately this is rarely the case when running with a 16KB granule,
and we also run into limits with 4KB granule when building much larger
kernels.

This patch re-writes the early page table logic to compute indices of
mappings for each level of page table, and if multiple indices are
required, the next-level page table is scaled up accordingly.

Also the required size of the swapper_pg_dir is computed at link time
to cover the mapping [KIMAGE_ADDR + VOFFSET, _end]. When KASLR is
enabled, an extra page is set aside for each level that may require extra
entries at runtime.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
hifive-unleashed-5.1
Steve Capper 2018-01-11 10:11:59 +00:00 committed by Catalin Marinas
parent 1e1b8c04fa
commit 0370b31e48
5 changed files with 156 additions and 40 deletions

View File

@ -52,7 +52,52 @@
#define IDMAP_PGTABLE_LEVELS (ARM64_HW_PGTABLE_LEVELS(PHYS_MASK_SHIFT))
#endif
#define SWAPPER_DIR_SIZE (SWAPPER_PGTABLE_LEVELS * PAGE_SIZE)
/*
* If KASLR is enabled, then an offset K is added to the kernel address
* space. The bottom 21 bits of this offset are zero to guarantee 2MB
* alignment for PA and VA.
*
* For each pagetable level of the swapper, we know that the shift will
* be larger than 21 (for the 4KB granule case we use section maps thus
* the smallest shift is actually 30) thus there is the possibility that
* KASLR can increase the number of pagetable entries by 1, so we make
* room for this extra entry.
*
* Note KASLR cannot increase the number of required entries for a level
* by more than one because it increments both the virtual start and end
* addresses equally (the extra entry comes from the case where the end
* address is just pushed over a boundary and the start address isn't).
*/
#ifdef CONFIG_RANDOMIZE_BASE
#define EARLY_KASLR (1)
#else
#define EARLY_KASLR (0)
#endif
#define EARLY_ENTRIES(vstart, vend, shift) (((vend) >> (shift)) \
- ((vstart) >> (shift)) + 1 + EARLY_KASLR)
#define EARLY_PGDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, PGDIR_SHIFT))
#if SWAPPER_PGTABLE_LEVELS > 3
#define EARLY_PUDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, PUD_SHIFT))
#else
#define EARLY_PUDS(vstart, vend) (0)
#endif
#if SWAPPER_PGTABLE_LEVELS > 2
#define EARLY_PMDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, SWAPPER_TABLE_SHIFT))
#else
#define EARLY_PMDS(vstart, vend) (0)
#endif
#define EARLY_PAGES(vstart, vend) ( 1 /* PGDIR page */ \
+ EARLY_PGDS((vstart), (vend)) /* each PGDIR needs a next level page table */ \
+ EARLY_PUDS((vstart), (vend)) /* each PUD needs a next level page table */ \
+ EARLY_PMDS((vstart), (vend))) /* each PMD needs a next level page table */
#define SWAPPER_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR + TEXT_OFFSET, _end))
#define IDMAP_DIR_SIZE (IDMAP_PGTABLE_LEVELS * PAGE_SIZE)
#ifdef CONFIG_ARM64_SW_TTBR0_PAN

View File

@ -706,6 +706,7 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm,
#endif
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern pgd_t swapper_pg_end[];
extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
extern pgd_t tramp_pg_dir[PTRS_PER_PGD];

View File

@ -191,44 +191,109 @@ ENDPROC(preserve_boot_args)
.endm
/*
* Macro to populate the PGD (and possibily PUD) for the corresponding
* block entry in the next level (tbl) for the given virtual address.
* Macro to populate page table entries, these entries can be pointers to the next level
* or last level entries pointing to physical memory.
*
* Preserves: tbl, next, virt
* Corrupts: ptrs_per_pgd, tmp1, tmp2
* tbl: page table address
* rtbl: pointer to page table or physical memory
* index: start index to write
* eindex: end index to write - [index, eindex] written to
* flags: flags for pagetable entry to or in
* inc: increment to rtbl between each entry
* tmp1: temporary variable
*
* Preserves: tbl, eindex, flags, inc
* Corrupts: index, tmp1
* Returns: rtbl
*/
.macro create_pgd_entry, tbl, virt, ptrs_per_pgd, tmp1, tmp2
create_table_entry \tbl, \virt, PGDIR_SHIFT, \ptrs_per_pgd, \tmp1, \tmp2
#if SWAPPER_PGTABLE_LEVELS > 3
mov \ptrs_per_pgd, PTRS_PER_PUD
create_table_entry \tbl, \virt, PUD_SHIFT, \ptrs_per_pgd, \tmp1, \tmp2
#endif
#if SWAPPER_PGTABLE_LEVELS > 2
mov \ptrs_per_pgd, PTRS_PER_PTE
create_table_entry \tbl, \virt, SWAPPER_TABLE_SHIFT, \ptrs_per_pgd, \tmp1, \tmp2
#endif
.macro populate_entries, tbl, rtbl, index, eindex, flags, inc, tmp1
.Lpe\@: phys_to_pte \rtbl, \tmp1
orr \tmp1, \tmp1, \flags // tmp1 = table entry
str \tmp1, [\tbl, \index, lsl #3]
add \rtbl, \rtbl, \inc // rtbl = pa next level
add \index, \index, #1
cmp \index, \eindex
b.ls .Lpe\@
.endm
/*
* Macro to populate block entries in the page table for the start..end
* virtual range (inclusive).
* Compute indices of table entries from virtual address range. If multiple entries
* were needed in the previous page table level then the next page table level is assumed
* to be composed of multiple pages. (This effectively scales the end index).
*
* Preserves: tbl, flags
* Corrupts: phys, start, end, tmp, pstate
* vstart: virtual address of start of range
* vend: virtual address of end of range
* shift: shift used to transform virtual address into index
* ptrs: number of entries in page table
* istart: index in table corresponding to vstart
* iend: index in table corresponding to vend
* count: On entry: how many extra entries were required in previous level, scales
* our end index.
* On exit: returns how many extra entries required for next page table level
*
* Preserves: vstart, vend, shift, ptrs
* Returns: istart, iend, count
*/
.macro create_block_map, tbl, flags, phys, start, end, tmp
lsr \start, \start, #SWAPPER_BLOCK_SHIFT
and \start, \start, #PTRS_PER_PTE - 1 // table index
bic \phys, \phys, #SWAPPER_BLOCK_SIZE - 1
lsr \end, \end, #SWAPPER_BLOCK_SHIFT
and \end, \end, #PTRS_PER_PTE - 1 // table end index
9999: phys_to_pte \phys, \tmp
orr \tmp, \tmp, \flags // table entry
str \tmp, [\tbl, \start, lsl #3] // store the entry
add \start, \start, #1 // next entry
add \phys, \phys, #SWAPPER_BLOCK_SIZE // next block
cmp \start, \end
b.ls 9999b
.macro compute_indices, vstart, vend, shift, ptrs, istart, iend, count
lsr \iend, \vend, \shift
mov \istart, \ptrs
sub \istart, \istart, #1
and \iend, \iend, \istart // iend = (vend >> shift) & (ptrs - 1)
mov \istart, \ptrs
mul \istart, \istart, \count
add \iend, \iend, \istart // iend += (count - 1) * ptrs
// our entries span multiple tables
lsr \istart, \vstart, \shift
mov \count, \ptrs
sub \count, \count, #1
and \istart, \istart, \count
sub \count, \iend, \istart
.endm
/*
* Map memory for specified virtual address range. Each level of page table needed supports
* multiple entries. If a level requires n entries the next page table level is assumed to be
* formed from n pages.
*
* tbl: location of page table
* rtbl: address to be used for first level page table entry (typically tbl + PAGE_SIZE)
* vstart: start address to map
* vend: end address to map - we map [vstart, vend]
* flags: flags to use to map last level entries
* phys: physical address corresponding to vstart - physical memory is contiguous
* pgds: the number of pgd entries
*
* Temporaries: istart, iend, tmp, count, sv - these need to be different registers
* Preserves: vstart, vend, flags
* Corrupts: tbl, rtbl, istart, iend, tmp, count, sv
*/
.macro map_memory, tbl, rtbl, vstart, vend, flags, phys, pgds, istart, iend, tmp, count, sv
add \rtbl, \tbl, #PAGE_SIZE
mov \sv, \rtbl
mov \count, #0
compute_indices \vstart, \vend, #PGDIR_SHIFT, \pgds, \istart, \iend, \count
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
mov \sv, \rtbl
#if SWAPPER_PGTABLE_LEVELS > 3
compute_indices \vstart, \vend, #PUD_SHIFT, #PTRS_PER_PUD, \istart, \iend, \count
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
mov \sv, \rtbl
#endif
#if SWAPPER_PGTABLE_LEVELS > 2
compute_indices \vstart, \vend, #SWAPPER_TABLE_SHIFT, #PTRS_PER_PMD, \istart, \iend, \count
populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
mov \tbl, \sv
#endif
compute_indices \vstart, \vend, #SWAPPER_BLOCK_SHIFT, #PTRS_PER_PTE, \istart, \iend, \count
bic \count, \phys, #SWAPPER_BLOCK_SIZE - 1
populate_entries \tbl, \count, \istart, \iend, \flags, #SWAPPER_BLOCK_SIZE, \tmp
.endm
/*
@ -246,14 +311,16 @@ __create_page_tables:
* dirty cache lines being evicted.
*/
adrp x0, idmap_pg_dir
ldr x1, =(IDMAP_DIR_SIZE + SWAPPER_DIR_SIZE + RESERVED_TTBR0_SIZE)
adrp x1, swapper_pg_end
sub x1, x1, x0
bl __inval_dcache_area
/*
* Clear the idmap and swapper page tables.
*/
adrp x0, idmap_pg_dir
ldr x1, =(IDMAP_DIR_SIZE + SWAPPER_DIR_SIZE + RESERVED_TTBR0_SIZE)
adrp x1, swapper_pg_end
sub x1, x1, x0
1: stp xzr, xzr, [x0], #16
stp xzr, xzr, [x0], #16
stp xzr, xzr, [x0], #16
@ -318,10 +385,10 @@ __create_page_tables:
#endif
1:
ldr_l x4, idmap_ptrs_per_pgd
create_pgd_entry x0, x3, x4, x5, x6
mov x5, x3 // __pa(__idmap_text_start)
adr_l x6, __idmap_text_end // __pa(__idmap_text_end)
create_block_map x0, x7, x3, x5, x6, x4
map_memory x0, x1, x3, x6, x7, x3, x4, x10, x11, x12, x13, x14
/*
* Map the kernel image (starting with PHYS_OFFSET).
@ -330,12 +397,12 @@ __create_page_tables:
mov_q x5, KIMAGE_VADDR + TEXT_OFFSET // compile time __va(_text)
add x5, x5, x23 // add KASLR displacement
mov x4, PTRS_PER_PGD
create_pgd_entry x0, x5, x4, x3, x6
adrp x6, _end // runtime __pa(_end)
adrp x3, _text // runtime __pa(_text)
sub x6, x6, x3 // _end - _text
add x6, x6, x5 // runtime __va(_end)
create_block_map x0, x7, x3, x5, x6, x4
map_memory x0, x1, x5, x6, x7, x3, x4, x10, x11, x12, x13, x14
/*
* Since the page tables have been populated with non-cacheable
@ -343,7 +410,8 @@ __create_page_tables:
* tables again to remove any speculatively loaded cache lines.
*/
adrp x0, idmap_pg_dir
ldr x1, =(IDMAP_DIR_SIZE + SWAPPER_DIR_SIZE + RESERVED_TTBR0_SIZE)
adrp x1, swapper_pg_end
sub x1, x1, x0
dmb sy
bl __inval_dcache_area

View File

@ -230,6 +230,7 @@ SECTIONS
#endif
swapper_pg_dir = .;
. += SWAPPER_DIR_SIZE;
swapper_pg_end = .;
__pecoff_data_size = ABSOLUTE(. - __initdata_begin);
_end = .;

View File

@ -642,7 +642,8 @@ void __init paging_init(void)
* allocated with it.
*/
memblock_free(__pa_symbol(swapper_pg_dir) + PAGE_SIZE,
SWAPPER_DIR_SIZE - PAGE_SIZE);
__pa_symbol(swapper_pg_end) - __pa_symbol(swapper_pg_dir)
- PAGE_SIZE);
}
/*