redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

powerpc/dts: update MSI bindings doc for MPIC v4.3 

Add compatible "fsl,mpic-msi-v4.3" for MPIC v4.3. MPIC v4.3 contains
MSIIR and MSIIR1. MSIIR supports 8 MSI registers and MSIIR1 supports
16 MSI registers, but uses different IBS and SRS shift. When using
MSIR1, the interrupt number is not consecutive. It is hard to use
'msi-available-ranges' to describe the ranges of the available
interrupt, so MPIC v4.3 does not support this property.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
[scottwood@freescale.com: minor grammar fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
hifive-unleashed-5.1
Minghuan Lian 2013-06-21 18:59:12 +08:00 committed by Scott Wood
parent df1024ad87
commit 03daa99ef5
1 changed files with 41 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

53
Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
View File

@ -1,21 +1,20 @@
* Freescale MSI interrupt controller
Required properties:
- compatible : compatible list, contains 2 entries,
first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
the parent type.
- compatible : compatible list, may contain one or two entries
The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
"fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
should be used. The first entry is optional; the second entry is
required.
- reg : It may contain one or two regions. The first region should contain
the address and the length of the shared message interrupt register set.
The second region should contain the address of aliased MSIIR register for
platforms that have such an alias.
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
optional, without this, all the 256 MSI interrupts can be used.
Each available range must begin and end on a multiple of 32 (i.e.
no splitting an individual MSI register or the associated PIC interrupt).
The second region should contain the address of aliased MSIIR or MSIIR1
register for platforms that have such an alias, if using MSIIR1, the second
region must be added because different MSI group has different MSIIR1 offset.
- interrupts : each one of the interrupts here is one entry per 32 MSIs,
and routed to the host interrupt controller. the interrupts should
@ -28,6 +27,14 @@ Required properties:
to MPIC.
Optional properties:
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
optional, without this, all the MSI interrupts can be used.
Each available range must begin and end on a multiple of 32 (i.e.
no splitting an individual MSI register or the associated PIC interrupt).
MPIC v4.3 does not support this property because the 32 interrupts of an
individual register are not continuous when using MSIIR1.
- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
is used for MSI messaging. The address of MSIIR in PCI address space is
the MSI message address.
@ -54,6 +61,28 @@ Example:
interrupt-parent = <&mpic>;
};
msi@41600 {
compatible = "fsl,mpic-msi-v4.3";
reg = <0x41600 0x200 0x44148 4>;
interrupts = <
0xe0 0 0 0
0xe1 0 0 0
0xe2 0 0 0
0xe3 0 0 0
0xe4 0 0 0
0xe5 0 0 0
0xe6 0 0 0
0xe7 0 0 0
0x100 0 0 0
0x101 0 0 0
0x102 0 0 0
0x103 0 0 0
0x104 0 0 0
0x105 0 0 0
0x106 0 0 0
0x107 0 0 0>;
};
The Freescale hypervisor and msi-address-64
-------------------------------------------
Normally, PCI devices have access to all of CCSR via an ATMU mapping. The