diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 09a8743143f3..d3e5e9bc8f94 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -55,6 +55,8 @@ struct device_node;
 #define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/
 #define EEH_PE_PHB_DEAD		(1 << 2)	/* Dead PHB		*/
 
+#define EEH_PE_KEEP		(1 << 8)	/* Keep PE on hotplug	*/
+
 struct eeh_pe {
 	int type;			/* PE type: PHB/Bus/Device	*/
 	int state;			/* PE EEH dependent mode	*/
@@ -72,8 +74,8 @@ struct eeh_pe {
 	struct list_head child;		/* Child PEs			*/
 };
 
-#define eeh_pe_for_each_dev(pe, edev) \
-		list_for_each_entry(edev, &pe->edevs, list)
+#define eeh_pe_for_each_dev(pe, edev, tmp) \
+		list_for_each_entry_safe(edev, tmp, &pe->edevs, list)
 
 /*
  * The struct is used to trace EEH state for the associated
@@ -82,7 +84,13 @@ struct eeh_pe {
  * another tree except the currently existing tree of PCI
  * buses and PCI devices
  */
-#define EEH_DEV_IRQ_DISABLED	(1<<0)	/* Interrupt disabled		*/
+#define EEH_DEV_BRIDGE		(1 << 0)	/* PCI bridge		*/
+#define EEH_DEV_ROOT_PORT	(1 << 1)	/* PCIe root port	*/
+#define EEH_DEV_DS_PORT		(1 << 2)	/* Downstream port	*/
+#define EEH_DEV_IRQ_DISABLED	(1 << 3)	/* Interrupt disabled	*/
+#define EEH_DEV_DISCONNECTED	(1 << 4)	/* Removing from PE	*/
+
+#define EEH_DEV_SYSFS		(1 << 8)	/* Sysfs created        */
 
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
@@ -90,11 +98,13 @@ struct eeh_dev {
 	int config_addr;		/* Config address		*/
 	int pe_config_addr;		/* PE config address		*/
 	u32 config_space[16];		/* Saved PCI config space	*/
+	u8 pcie_cap;			/* Saved PCIe capability	*/
 	struct eeh_pe *pe;		/* Associated PE		*/
 	struct list_head list;		/* Form link list in the PE	*/
 	struct pci_controller *phb;	/* Associated PHB		*/
 	struct device_node *dn;		/* Associated device node	*/
 	struct pci_dev *pdev;		/* Associated PCI device	*/
+	struct pci_bus *bus;		/* PCI bus for partial hotplug	*/
 };
 
 static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev)
@@ -193,8 +203,10 @@ int eeh_phb_pe_create(struct pci_controller *phb);
 struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
 struct eeh_pe *eeh_pe_get(struct eeh_dev *edev);
 int eeh_add_to_parent_pe(struct eeh_dev *edev);
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe);
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
 void eeh_pe_update_time_stamp(struct eeh_pe *pe);
+void *eeh_pe_traverse(struct eeh_pe *root,
+		eeh_traverse_func fn, void *flag);
 void *eeh_pe_dev_traverse(struct eeh_pe *root,
 		eeh_traverse_func fn, void *flag);
 void eeh_pe_restore_bars(struct eeh_pe *pe);
@@ -209,10 +221,12 @@ unsigned long eeh_check_failure(const volatile void __iomem *token,
 				unsigned long val);
 int eeh_dev_check_failure(struct eeh_dev *edev);
 void eeh_addr_cache_build(void);
+void eeh_add_device_early(struct device_node *);
 void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 void eeh_add_sysfs_files(struct pci_bus *);
-void eeh_remove_bus_device(struct pci_dev *, int);
+void eeh_remove_device(struct pci_dev *);
 
 /**
  * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
@@ -252,13 +266,17 @@ static inline unsigned long eeh_check_failure(const volatile void __iomem *token
 
 static inline void eeh_addr_cache_build(void) { }
 
+static inline void eeh_add_device_early(struct device_node *dn) { }
+
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
 
+static inline void eeh_add_device_late(struct pci_dev *dev) { }
+
 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
 
 static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
 
-static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
+static inline void eeh_remove_device(struct pci_dev *dev) { }
 
 #define EEH_POSSIBLE_ERROR(val, type) (0)
 #define EEH_IO_ERROR_VALUE(size) (-1UL)
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index ba713f166fa5..10be1dd01c6b 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -96,10 +96,11 @@ static inline bool arch_irqs_disabled(void)
 #endif
 
 #define hard_irq_disable()	do {			\
-	u8 _was_enabled = get_paca()->soft_enabled;	\
+	u8 _was_enabled;				\
 	__hard_irq_disable();				\
-	get_paca()->soft_enabled = 0;			\
-	get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;	\
+	_was_enabled = local_paca->soft_enabled;	\
+	local_paca->soft_enabled = 0;			\
+	local_paca->irq_happened |= PACA_IRQ_HARD_DIS;	\
 	if (_was_enabled)				\
 		trace_hardirqs_off();			\
 } while(0)
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index c1df590ec444..49fa55bfbac4 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -82,10 +82,9 @@ struct exception_table_entry;
 void sort_ex_table(struct exception_table_entry *start,
 		   struct exception_table_entry *finish);
 
-#ifdef CONFIG_MODVERSIONS
+#if defined(CONFIG_MODVERSIONS) && defined(CONFIG_PPC64)
 #define ARCH_RELOCATES_KCRCTAB
-
-extern const unsigned long reloc_start[];
+#define reloc_start PHYSICAL_START
 #endif
 #endif /* __KERNEL__ */
 #endif	/* _ASM_POWERPC_MODULE_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 2c1d8cb9b265..32d0d2018faf 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -209,7 +209,6 @@ static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn)
 extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
 
 /** Remove all of the PCI devices under this bus */
-extern void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe);
 extern void pcibios_remove_pci_devices(struct pci_bus *bus);
 
 /** Discover new pci devices under this bus, and add them */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 5d7d9c2a5473..a6840e4e24f7 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1088,7 +1088,8 @@
 #define PVR_970MP	0x0044
 #define PVR_970GX	0x0045
 #define PVR_POWER7p	0x004A
-#define PVR_POWER8	0x004B
+#define PVR_POWER8E	0x004B
+#define PVR_POWER8	0x004D
 #define PVR_BE		0x0070
 #define PVR_PA6T	0x0090
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2a45d0f04385..22973a74df73 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -494,9 +494,27 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7+",
 	},
-	{	/* Power8 */
+	{	/* Power8E */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x004b0000,
+		.cpu_name		= "POWER8E (raw)",
+		.cpu_features		= CPU_FTRS_POWER8,
+		.cpu_user_features	= COMMON_USER_POWER8,
+		.cpu_user_features2	= COMMON_USER2_POWER8,
+		.mmu_features		= MMU_FTRS_POWER8,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.oprofile_cpu_type	= "ppc64/power8",
+		.oprofile_type		= PPC_OPROFILE_INVALID,
+		.cpu_setup		= __setup_cpu_power8,
+		.cpu_restore		= __restore_cpu_power8,
+		.platform		= "power8",
+	},
+	{	/* Power8 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x004d0000,
 		.cpu_name		= "POWER8 (raw)",
 		.cpu_features		= CPU_FTRS_POWER8,
 		.cpu_user_features	= COMMON_USER_POWER8,
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 39954fe941b8..ea9414c8088d 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -231,7 +231,7 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
 void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 {
 	size_t loglen = 0;
-	struct eeh_dev *edev;
+	struct eeh_dev *edev, *tmp;
 	bool valid_cfg_log = true;
 
 	/*
@@ -251,7 +251,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 		eeh_pe_restore_bars(pe);
 
 		pci_regs_buf[0] = 0;
-		eeh_pe_for_each_dev(pe, edev) {
+		eeh_pe_for_each_dev(pe, edev, tmp) {
 			loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen,
 						      EEH_PCI_REGS_LOG_LEN - loglen);
 		}
@@ -499,8 +499,6 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
 	}
 
 	eeh_dev_check_failure(edev);
-
-	pci_dev_put(eeh_dev_to_pci_dev(edev));
 	return val;
 }
 
@@ -838,7 +836,7 @@ core_initcall_sync(eeh_init);
  * on the CEC architecture, type of the device, on earlier boot
  * command-line arguments & etc.
  */
-static void eeh_add_device_early(struct device_node *dn)
+void eeh_add_device_early(struct device_node *dn)
 {
 	struct pci_controller *phb;
 
@@ -886,7 +884,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-static void eeh_add_device_late(struct pci_dev *dev)
+void eeh_add_device_late(struct pci_dev *dev)
 {
 	struct device_node *dn;
 	struct eeh_dev *edev;
@@ -902,9 +900,23 @@ static void eeh_add_device_late(struct pci_dev *dev)
 		pr_debug("EEH: Already referenced !\n");
 		return;
 	}
-	WARN_ON(edev->pdev);
 
-	pci_dev_get(dev);
+	/*
+	 * The EEH cache might not be removed correctly because of
+	 * unbalanced kref to the device during unplug time, which
+	 * relies on pcibios_release_device(). So we have to remove
+	 * that here explicitly.
+	 */
+	if (edev->pdev) {
+		eeh_rmv_from_parent_pe(edev);
+		eeh_addr_cache_rmv_dev(edev->pdev);
+		eeh_sysfs_remove_device(edev->pdev);
+		edev->mode &= ~EEH_DEV_SYSFS;
+
+		edev->pdev = NULL;
+		dev->dev.archdata.edev = NULL;
+	}
+
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
 
@@ -967,7 +979,6 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
 /**
  * eeh_remove_device - Undo EEH setup for the indicated pci device
  * @dev: pci device to be removed
- * @purge_pe: remove the PE or not
  *
  * This routine should be called when a device is removed from
  * a running system (e.g. by hotplug or dlpar).  It unregisters
@@ -975,7 +986,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
  * this device will no longer be detected after this call; thus,
  * i/o errors affecting this slot may leave this device unusable.
  */
-static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+void eeh_remove_device(struct pci_dev *dev)
 {
 	struct eeh_dev *edev;
 
@@ -986,42 +997,29 @@ static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 	/* Unregister the device with the EEH/PCI address search system */
 	pr_debug("EEH: Removing device %s\n", pci_name(dev));
 
-	if (!edev || !edev->pdev) {
+	if (!edev || !edev->pdev || !edev->pe) {
 		pr_debug("EEH: Not referenced !\n");
 		return;
 	}
+
+	/*
+	 * During the hotplug for EEH error recovery, we need the EEH
+	 * device attached to the parent PE in order for BAR restore
+	 * a bit later. So we keep it for BAR restore and remove it
+	 * from the parent PE during the BAR resotre.
+	 */
 	edev->pdev = NULL;
 	dev->dev.archdata.edev = NULL;
-	pci_dev_put(dev);
+	if (!(edev->pe->state & EEH_PE_KEEP))
+		eeh_rmv_from_parent_pe(edev);
+	else
+		edev->mode |= EEH_DEV_DISCONNECTED;
 
-	eeh_rmv_from_parent_pe(edev, purge_pe);
 	eeh_addr_cache_rmv_dev(dev);
 	eeh_sysfs_remove_device(dev);
+	edev->mode &= ~EEH_DEV_SYSFS;
 }
 
-/**
- * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
- * @dev: PCI device
- * @purge_pe: remove the corresponding PE or not
- *
- * This routine must be called when a device is removed from the
- * running system through hotplug or dlpar. The corresponding
- * PCI address cache will be removed.
- */
-void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
-{
-	struct pci_bus *bus = dev->subordinate;
-	struct pci_dev *child, *tmp;
-
-	eeh_remove_device(dev, purge_pe);
-
-	if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
-			 eeh_remove_bus_device(child, purge_pe);
-	}
-}
-EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
-
 static int proc_eeh_show(struct seq_file *m, void *v)
 {
 	if (0 == eeh_subsystem_enabled) {
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index f9ac1232a746..e8c9fd546a5c 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -68,16 +68,12 @@ static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
 		struct pci_io_addr_range *piar;
 		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
 
-		if (addr < piar->addr_lo) {
+		if (addr < piar->addr_lo)
 			n = n->rb_left;
-		} else {
-			if (addr > piar->addr_hi) {
-				n = n->rb_right;
-			} else {
-				pci_dev_get(piar->pcidev);
-				return piar->edev;
-			}
-		}
+		else if (addr > piar->addr_hi)
+			n = n->rb_right;
+		else
+			return piar->edev;
 	}
 
 	return NULL;
@@ -156,7 +152,6 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 	if (!piar)
 		return NULL;
 
-	pci_dev_get(dev);
 	piar->addr_lo = alo;
 	piar->addr_hi = ahi;
 	piar->edev = pci_dev_to_eeh_dev(dev);
@@ -250,7 +245,6 @@ restart:
 
 		if (piar->pcidev == dev) {
 			rb_erase(n, &pci_io_addr_cache_root.rb_root);
-			pci_dev_put(piar->pcidev);
 			kfree(piar);
 			goto restart;
 		}
@@ -302,12 +296,10 @@ void eeh_addr_cache_build(void)
 		if (!edev)
 			continue;
 
-		pci_dev_get(dev);  /* matching put is in eeh_remove_device() */
 		dev->dev.archdata.edev = edev;
 		edev->pdev = dev;
 
 		eeh_addr_cache_insert_dev(dev);
-
 		eeh_sysfs_add_device(dev);
 	}
 
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 2b1ce17cae50..36bed5a12750 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -143,10 +143,14 @@ static void eeh_disable_irq(struct pci_dev *dev)
 static void eeh_enable_irq(struct pci_dev *dev)
 {
 	struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+	struct irq_desc *desc;
 
 	if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
 		edev->mode &= ~EEH_DEV_IRQ_DISABLED;
-		enable_irq(dev->irq);
+
+		desc = irq_to_desc(dev->irq);
+		if (desc && desc->depth > 0)
+			enable_irq(dev->irq);
 	}
 }
 
@@ -338,6 +342,54 @@ static void *eeh_report_failure(void *data, void *userdata)
 	return NULL;
 }
 
+static void *eeh_rmv_device(void *data, void *userdata)
+{
+	struct pci_driver *driver;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	int *removed = (int *)userdata;
+
+	/*
+	 * Actually, we should remove the PCI bridges as well.
+	 * However, that's lots of complexity to do that,
+	 * particularly some of devices under the bridge might
+	 * support EEH. So we just care about PCI devices for
+	 * simplicity here.
+	 */
+	if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
+		return NULL;
+	driver = eeh_pcid_get(dev);
+	if (driver && driver->err_handler)
+		return NULL;
+
+	/* Remove it from PCI subsystem */
+	pr_debug("EEH: Removing %s without EEH sensitive driver\n",
+		 pci_name(dev));
+	edev->bus = dev->bus;
+	edev->mode |= EEH_DEV_DISCONNECTED;
+	(*removed)++;
+
+	pci_stop_and_remove_bus_device(dev);
+
+	return NULL;
+}
+
+static void *eeh_pe_detach_dev(void *data, void *userdata)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	struct eeh_dev *edev, *tmp;
+
+	eeh_pe_for_each_dev(pe, edev, tmp) {
+		if (!(edev->mode & EEH_DEV_DISCONNECTED))
+			continue;
+
+		edev->mode &= ~(EEH_DEV_DISCONNECTED | EEH_DEV_IRQ_DISABLED);
+		eeh_rmv_from_parent_pe(edev);
+	}
+
+	return NULL;
+}
+
 /**
  * eeh_reset_device - Perform actual reset of a pci slot
  * @pe: EEH PE
@@ -349,8 +401,9 @@ static void *eeh_report_failure(void *data, void *userdata)
  */
 static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 {
+	struct pci_bus *frozen_bus = eeh_pe_bus_get(pe);
 	struct timeval tstamp;
-	int cnt, rc;
+	int cnt, rc, removed = 0;
 
 	/* pcibios will clear the counter; save the value */
 	cnt = pe->freeze_count;
@@ -362,8 +415,11 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * devices are expected to be attached soon when calling
 	 * into pcibios_add_pci_devices().
 	 */
+	eeh_pe_state_mark(pe, EEH_PE_KEEP);
 	if (bus)
-		__pcibios_remove_pci_devices(bus, 0);
+		pcibios_remove_pci_devices(bus);
+	else if (frozen_bus)
+		eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
 
 	/* Reset the pci controller. (Asserts RST#; resets config space).
 	 * Reconfigure bridges and devices. Don't try to bring the system
@@ -384,9 +440,24 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * potentially weird things happen.
 	 */
 	if (bus) {
+		pr_info("EEH: Sleep 5s ahead of complete hotplug\n");
 		ssleep(5);
+
+		/*
+		 * The EEH device is still connected with its parent
+		 * PE. We should disconnect it so the binding can be
+		 * rebuilt when adding PCI devices.
+		 */
+		eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
 		pcibios_add_pci_devices(bus);
+	} else if (frozen_bus && removed) {
+		pr_info("EEH: Sleep 5s ahead of partial hotplug\n");
+		ssleep(5);
+
+		eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
+		pcibios_add_pci_devices(frozen_bus);
 	}
+	eeh_pe_state_clear(pe, EEH_PE_KEEP);
 
 	pe->tstamp = tstamp;
 	pe->freeze_count = cnt;
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 016588a6f5ed..f9450537e335 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -149,8 +149,8 @@ static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
  * callback returns something other than NULL, or no more PEs
  * to be traversed.
  */
-static void *eeh_pe_traverse(struct eeh_pe *root,
-			eeh_traverse_func fn, void *flag)
+void *eeh_pe_traverse(struct eeh_pe *root,
+		      eeh_traverse_func fn, void *flag)
 {
 	struct eeh_pe *pe;
 	void *ret;
@@ -176,7 +176,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
 		eeh_traverse_func fn, void *flag)
 {
 	struct eeh_pe *pe;
-	struct eeh_dev *edev;
+	struct eeh_dev *edev, *tmp;
 	void *ret;
 
 	if (!root) {
@@ -186,7 +186,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
 
 	/* Traverse root PE */
 	for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
-		eeh_pe_for_each_dev(pe, edev) {
+		eeh_pe_for_each_dev(pe, edev, tmp) {
 			ret = fn(edev, flag);
 			if (ret)
 				return ret;
@@ -333,7 +333,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 		while (parent) {
 			if (!(parent->type & EEH_PE_INVALID))
 				break;
-			parent->type &= ~EEH_PE_INVALID;
+			parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
 			parent = parent->parent;
 		}
 		pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
@@ -397,21 +397,20 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 /**
  * eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
  * @edev: EEH device
- * @purge_pe: remove PE or not
  *
  * The PE hierarchy tree might be changed when doing PCI hotplug.
  * Also, the PCI devices or buses could be removed from the system
  * during EEH recovery. So we have to call the function remove the
  * corresponding PE accordingly if necessary.
  */
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 {
 	struct eeh_pe *pe, *parent, *child;
 	int cnt;
 
 	if (!edev->pe) {
-		pr_warning("%s: No PE found for EEH device %s\n",
-			__func__, edev->dn->full_name);
+		pr_debug("%s: No PE found for EEH device %s\n",
+			 __func__, edev->dn->full_name);
 		return -EEXIST;
 	}
 
@@ -431,7 +430,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
 		if (pe->type & EEH_PE_PHB)
 			break;
 
-		if (purge_pe) {
+		if (!(pe->state & EEH_PE_KEEP)) {
 			if (list_empty(&pe->edevs) &&
 			    list_empty(&pe->child_list)) {
 				list_del(&pe->child);
@@ -502,7 +501,7 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
 {
 	struct eeh_pe *pe = (struct eeh_pe *)data;
 	int state = *((int *)flag);
-	struct eeh_dev *tmp;
+	struct eeh_dev *edev, *tmp;
 	struct pci_dev *pdev;
 
 	/*
@@ -512,8 +511,8 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
 	 * the PCI device driver.
 	 */
 	pe->state |= state;
-	eeh_pe_for_each_dev(pe, tmp) {
-		pdev = eeh_dev_to_pci_dev(tmp);
+	eeh_pe_for_each_dev(pe, edev, tmp) {
+		pdev = eeh_dev_to_pci_dev(edev);
 		if (pdev)
 			pdev->error_state = pci_channel_io_frozen;
 	}
@@ -579,7 +578,7 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state)
  * blocked on normal path during the stage. So we need utilize
  * eeh operations, which is always permitted.
  */
-static void eeh_bridge_check_link(struct pci_dev *pdev,
+static void eeh_bridge_check_link(struct eeh_dev *edev,
 				  struct device_node *dn)
 {
 	int cap;
@@ -590,16 +589,17 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
 	 * We only check root port and downstream ports of
 	 * PCIe switches
 	 */
-	if (!pci_is_pcie(pdev) ||
-	    (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
-	     pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM))
+	if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT)))
 		return;
 
-	pr_debug("%s: Check PCIe link for %s ...\n",
-		 __func__, pci_name(pdev));
+	pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n",
+		 __func__, edev->phb->global_number,
+		 edev->config_addr >> 8,
+		 PCI_SLOT(edev->config_addr & 0xFF),
+		 PCI_FUNC(edev->config_addr & 0xFF));
 
 	/* Check slot status */
-	cap = pdev->pcie_cap;
+	cap = edev->pcie_cap;
 	eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val);
 	if (!(val & PCI_EXP_SLTSTA_PDS)) {
 		pr_debug("  No card in the slot (0x%04x) !\n", val);
@@ -653,8 +653,7 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
 #define BYTE_SWAP(OFF)	(8*((OFF)/4)+3-(OFF))
 #define SAVED_BYTE(OFF)	(((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
 
-static void eeh_restore_bridge_bars(struct pci_dev *pdev,
-				    struct eeh_dev *edev,
+static void eeh_restore_bridge_bars(struct eeh_dev *edev,
 				    struct device_node *dn)
 {
 	int i;
@@ -680,7 +679,7 @@ static void eeh_restore_bridge_bars(struct pci_dev *pdev,
 	eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]);
 
 	/* Check the PCIe link is ready */
-	eeh_bridge_check_link(pdev, dn);
+	eeh_bridge_check_link(edev, dn);
 }
 
 static void eeh_restore_device_bars(struct eeh_dev *edev,
@@ -729,19 +728,12 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
  */
 static void *eeh_restore_one_device_bars(void *data, void *flag)
 {
-	struct pci_dev *pdev = NULL;
 	struct eeh_dev *edev = (struct eeh_dev *)data;
 	struct device_node *dn = eeh_dev_to_of_node(edev);
 
-	/* Trace the PCI bridge */
-	if (eeh_probe_mode_dev()) {
-		pdev = eeh_dev_to_pci_dev(edev);
-		if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
-                        pdev = NULL;
-        }
-
-	if (pdev)
-		eeh_restore_bridge_bars(pdev, edev, dn);
+	/* Do special restore for bridges */
+	if (edev->mode & EEH_DEV_BRIDGE)
+		eeh_restore_bridge_bars(edev, dn);
 	else
 		eeh_restore_device_bars(edev, dn);
 
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index e7ae3484918c..5d753d4f2c75 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -56,19 +56,40 @@ EEH_SHOW_ATTR(eeh_pe_config_addr,  pe_config_addr,  "0x%x");
 
 void eeh_sysfs_add_device(struct pci_dev *pdev)
 {
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
 	int rc=0;
 
+	if (edev && (edev->mode & EEH_DEV_SYSFS))
+		return;
+
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
 
 	if (rc)
 		printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
+	else if (edev)
+		edev->mode |= EEH_DEV_SYSFS;
 }
 
 void eeh_sysfs_remove_device(struct pci_dev *pdev)
 {
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
+
+	/*
+	 * The parent directory might have been removed. We needn't
+	 * continue for that case.
+	 */
+	if (!pdev->dev.kobj.sd) {
+		if (edev)
+			edev->mode &= ~EEH_DEV_SYSFS;
+		return;
+	}
+
 	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+
+	if (edev)
+		edev->mode &= ~EEH_DEV_SYSFS;
 }
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f46914a0f33e..7d22a675fe1a 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1462,6 +1462,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
 	/* Allocate bus and devices resources */
 	pcibios_allocate_bus_resources(bus);
 	pcibios_claim_one_bus(bus);
+	if (!pci_has_flag(PCI_PROBE_ONLY))
+		pci_assign_unassigned_bus_resources(bus);
 
 	/* Fixup EEH */
 	eeh_add_device_tree_late(bus);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 3f608800c06b..c1e17ae68a08 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -22,32 +22,14 @@
 #include <asm/eeh.h>
 
 /**
- * __pcibios_remove_pci_devices - remove all devices under this bus
- * @bus: the indicated PCI bus
- * @purge_pe: destroy the PE on removal of PCI devices
+ * pcibios_release_device - release PCI device
+ * @dev: PCI device
  *
- * Remove all of the PCI devices under this bus both from the
- * linux pci device tree, and from the powerpc EEH address cache.
- * By default, the corresponding PE will be destroied during the
- * normal PCI hotplug path. For PCI hotplug during EEH recovery,
- * the corresponding PE won't be destroied and deallocated.
+ * The function is called before releasing the indicated PCI device.
  */
-void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
+void pcibios_release_device(struct pci_dev *dev)
 {
-	struct pci_dev *dev, *tmp;
-	struct pci_bus *child_bus;
-
-	/* First go down child busses */
-	list_for_each_entry(child_bus, &bus->children, node)
-		__pcibios_remove_pci_devices(child_bus, purge_pe);
-
-	pr_debug("PCI: Removing devices on bus %04x:%02x\n",
-		 pci_domain_nr(bus),  bus->number);
-	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
-		pr_debug("     * Removing %s...\n", pci_name(dev));
-		eeh_remove_bus_device(dev, purge_pe);
-		pci_stop_and_remove_bus_device(dev);
-	}
+	eeh_remove_device(dev);
 }
 
 /**
@@ -59,8 +41,21 @@ void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
  */
 void pcibios_remove_pci_devices(struct pci_bus *bus)
 {
-	__pcibios_remove_pci_devices(bus, 1);
+	struct pci_dev *dev, *tmp;
+	struct pci_bus *child_bus;
+
+	/* First go down child busses */
+	list_for_each_entry(child_bus, &bus->children, node)
+		pcibios_remove_pci_devices(child_bus);
+
+	pr_debug("PCI: Removing devices on bus %04x:%02x\n",
+		 pci_domain_nr(bus),  bus->number);
+	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+		pr_debug("   Removing %s...\n", pci_name(dev));
+		pci_stop_and_remove_bus_device(dev);
+	}
 }
+
 EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
 
 /**
@@ -76,7 +71,7 @@ EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
  */
 void pcibios_add_pci_devices(struct pci_bus * bus)
 {
-	int slotno, num, mode, pass, max;
+	int slotno, mode, pass, max;
 	struct pci_dev *dev;
 	struct device_node *dn = pci_bus_to_OF_node(bus);
 
@@ -90,11 +85,15 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
 		/* use ofdt-based probe */
 		of_rescan_bus(dn, bus);
 	} else if (mode == PCI_PROBE_NORMAL) {
-		/* use legacy probe */
+		/*
+		 * Use legacy probe. In the partial hotplug case, we
+		 * probably have grandchildren devices unplugged. So
+		 * we don't check the return value from pci_scan_slot() in
+		 * order for fully rescan all the way down to pick them up.
+		 * They can have been removed during partial hotplug.
+		 */
 		slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
-		num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
-		if (!num)
-			return;
+		pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
 		pcibios_setup_bus_devices(bus);
 		max = bus->busn_res.start;
 		for (pass = 0; pass < 2; pass++) {
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 6b0ba5854d99..15d9105323bf 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -230,11 +230,14 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 		return;
 	}
 
-	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+	bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]);
 	if (!bus) {
-		printk(KERN_ERR "Failed to create pci bus for %s\n",
-		       node->full_name);
-		return;
+		bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+		if (!bus) {
+			printk(KERN_ERR "Failed to create pci bus for %s\n",
+			       node->full_name);
+			return;
+		}
 	}
 
 	bus->primary = dev->bus->number;
@@ -292,6 +295,38 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 }
 EXPORT_SYMBOL(of_scan_pci_bridge);
 
+static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
+			    struct device_node *dn)
+{
+	struct pci_dev *dev = NULL;
+	const u32 *reg;
+	int reglen, devfn;
+
+	pr_debug("  * %s\n", dn->full_name);
+	if (!of_device_is_available(dn))
+		return NULL;
+
+	reg = of_get_property(dn, "reg", &reglen);
+	if (reg == NULL || reglen < 20)
+		return NULL;
+	devfn = (reg[0] >> 8) & 0xff;
+
+	/* Check if the PCI device is already there */
+	dev = pci_get_slot(bus, devfn);
+	if (dev) {
+		pci_dev_put(dev);
+		return dev;
+	}
+
+	/* create a new pci_dev for this device */
+	dev = of_create_pci_dev(dn, bus, devfn);
+	if (!dev)
+		return NULL;
+
+	pr_debug("  dev header type: %x\n", dev->hdr_type);
+	return dev;
+}
+
 /**
  * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
  * @node: device tree node for the PCI bus
@@ -302,8 +337,6 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
 			  int rescan_existing)
 {
 	struct device_node *child;
-	const u32 *reg;
-	int reglen, devfn;
 	struct pci_dev *dev;
 
 	pr_debug("of_scan_bus(%s) bus no %d...\n",
@@ -311,16 +344,7 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
 
 	/* Scan direct children */
 	for_each_child_of_node(node, child) {
-		pr_debug("  * %s\n", child->full_name);
-		if (!of_device_is_available(child))
-			continue;
-		reg = of_get_property(child, "reg", &reglen);
-		if (reg == NULL || reglen < 20)
-			continue;
-		devfn = (reg[0] >> 8) & 0xff;
-
-		/* create a new pci_dev for this device */
-		dev = of_create_pci_dev(child, bus, devfn);
+		dev = of_scan_pci_dev(bus, child);
 		if (!dev)
 			continue;
 		pr_debug("    dev header type: %x\n", dev->hdr_type);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5eccda9fd33f..607902424e73 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -644,7 +644,8 @@ unsigned char ibm_architecture_vec[] = {
 	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
 	W(0xffff0000), W(0x003f0000),	/* POWER7 */
-	W(0xffff0000), W(0x004b0000),	/* POWER8 */
+	W(0xffff0000), W(0x004b0000),	/* POWER8E */
+	W(0xffff0000), W(0x004d0000),	/* POWER8 */
 	W(0xffffffff), W(0x0f000004),	/* all 2.07-compliant */
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
@@ -706,7 +707,7 @@ unsigned char ibm_architecture_vec[] = {
 	 * must match by the macro below. Update the definition if
 	 * the structure layout changes.
 	 */
-#define IBM_ARCH_VEC_NRCORES_OFFSET	117
+#define IBM_ARCH_VEC_NRCORES_OFFSET	125
 	W(NR_CPUS),			/* number of cores supported */
 	0,
 	0,
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 654e479802f2..f096e72262f4 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -38,9 +38,6 @@ jiffies = jiffies_64 + 4;
 #endif
 SECTIONS
 {
-	. = 0;
-	reloc_start = .;
-
 	. = KERNELBASE;
 
 /*
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 3f0c30ae4791..c33d939120c9 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -43,6 +43,7 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)
 {
 	unsigned long va;
 	unsigned int penc;
+	unsigned long sllp;
 
 	/*
 	 * We need 14 to 65 bits of va for a tlibe of 4K page
@@ -64,7 +65,9 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)
 		/* clear out bits after (52) [0....52.....63] */
 		va &= ~((1ul << (64 - 52)) - 1);
 		va |= ssize << 8;
-		va |= mmu_psize_defs[apsize].sllp << 6;
+		sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) |
+			((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4);
+		va |= sllp << 5;
 		asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2)
 			     : : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
 			     : "memory");
@@ -98,6 +101,7 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)
 {
 	unsigned long va;
 	unsigned int penc;
+	unsigned long sllp;
 
 	/* VPN_SHIFT can be atmost 12 */
 	va = vpn << VPN_SHIFT;
@@ -113,7 +117,9 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)
 		/* clear out bits after(52) [0....52.....63] */
 		va &= ~((1ul << (64 - 52)) - 1);
 		va |= ssize << 8;
-		va |= mmu_psize_defs[apsize].sllp << 6;
+		sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) |
+			((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4);
+		va |= sllp << 5;
 		asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)"
 			     : : "r"(va) : "memory");
 		break;
@@ -554,6 +560,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 			seg_off |= vpi << shift;
 		}
 		*vpn = vsid << (SID_SHIFT - VPN_SHIFT) | seg_off >> VPN_SHIFT;
+		break;
 	case MMU_SEGSIZE_1T:
 		/* We only have 40 - 23 bits of seg_off in avpn */
 		seg_off = (avpn & 0x1ffff) << 23;
@@ -563,6 +570,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 			seg_off |= vpi << shift;
 		}
 		*vpn = vsid << (SID_SHIFT_1T - VPN_SHIFT) | seg_off >> VPN_SHIFT;
+		break;
 	default:
 		*vpn = size = 0;
 	}
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index a3985aee77fe..24a45f91c65f 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1252,8 +1252,11 @@ nocheck:
 
 	ret = 0;
  out:
-	if (has_branch_stack(event))
+	if (has_branch_stack(event)) {
 		power_pmu_bhrb_enable(event);
+		cpuhw->bhrb_filter = ppmu->bhrb_filter_map(
+					event->attr.branch_sample_type);
+	}
 
 	perf_pmu_enable(event->pmu);
 	local_irq_restore(flags);
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 96a64d6a8bdf..7466374d2787 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -561,18 +561,13 @@ static int power8_generic_events[] = {
 static u64 power8_bhrb_filter_map(u64 branch_sample_type)
 {
 	u64 pmu_bhrb_filter = 0;
-	u64 br_privilege = branch_sample_type & ONLY_PLM;
 
-	/* BHRB and regular PMU events share the same prvillege state
+	/* BHRB and regular PMU events share the same privilege state
 	 * filter configuration. BHRB is always recorded along with a
-	 * regular PMU event. So privilege state filter criteria for BHRB
-	 * and the companion PMU events has to be the same. As a default
-	 * "perf record" tool sets all privillege bits ON when no filter
-	 * criteria is provided in the command line. So as along as all
-	 * privillege bits are ON or they are OFF, we are good to go.
+	 * regular PMU event. As the privilege state filter is handled
+	 * in the basic PMC configuration of the accompanying regular
+	 * PMU event, we ignore any separate BHRB specific request.
 	 */
-	if ((br_privilege != 7) && (br_privilege != 0))
-		return -1;
 
 	/* No branch filter requested */
 	if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY)
@@ -621,10 +616,19 @@ static struct power_pmu power8_pmu = {
 
 static int __init init_power8_pmu(void)
 {
+	int rc;
+
 	if (!cur_cpu_spec->oprofile_cpu_type ||
 	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power8"))
 		return -ENODEV;
 
-	return register_power_pmu(&power8_pmu);
+	rc = register_power_pmu(&power8_pmu);
+	if (rc)
+		return rc;
+
+	/* Tell userspace that EBB is supported */
+	cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_EBB;
+
+	return 0;
 }
 early_initcall(init_power8_pmu);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 969cce73055a..79663d26e6ea 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -114,7 +114,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * the root bridge. So it's not reasonable to continue
 	 * the probing.
 	 */
-	if (!dn || !edev)
+	if (!dn || !edev || edev->pe)
 		return 0;
 
 	/* Skip for PCI-ISA bridge */
@@ -122,8 +122,19 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 		return 0;
 
 	/* Initialize eeh device */
-	edev->class_code	= dev->class;
-	edev->mode		= 0;
+	edev->class_code = dev->class;
+	edev->mode	&= 0xFFFFFF00;
+	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		edev->mode |= EEH_DEV_BRIDGE;
+	if (pci_is_pcie(dev)) {
+		edev->pcie_cap = pci_pcie_cap(dev);
+
+		if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
+			edev->mode |= EEH_DEV_ROOT_PORT;
+		else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
+			edev->mode |= EEH_DEV_DS_PORT;
+	}
+
 	edev->config_addr	= ((dev->bus->number << 8) | dev->devfn);
 	edev->pe_config_addr	= phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
 
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 49b57b9f835d..d8140b125e62 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1266,7 +1266,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
 }
 
-void pnv_pci_init_ioda2_phb(struct device_node *np)
+void __init pnv_pci_init_ioda2_phb(struct device_node *np)
 {
 	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
 }
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 1bd3399146ed..62b4f8025de0 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -19,7 +19,6 @@ config PPC_PSERIES
 	select ZLIB_DEFLATE
 	select PPC_DOORBELL
 	select HAVE_CONTEXT_TRACKING
-	select HOTPLUG if SMP
 	select HOTPLUG_CPU if SMP
 	default y
 
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index b456b157d33d..7fbc25b1813f 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -133,6 +133,48 @@ static int pseries_eeh_init(void)
 	return 0;
 }
 
+static int pseries_eeh_cap_start(struct device_node *dn)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	u32 status;
+
+	if (!pdn)
+		return 0;
+
+	rtas_read_config(pdn, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	return PCI_CAPABILITY_LIST;
+}
+
+
+static int pseries_eeh_find_cap(struct device_node *dn, int cap)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	int pos = pseries_eeh_cap_start(dn);
+	int cnt = 48;	/* Maximal number of capabilities */
+	u32 id;
+
+	if (!pos)
+		return 0;
+
+        while (cnt--) {
+		rtas_read_config(pdn, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+		pos &= ~3;
+		rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+		pos += PCI_CAP_LIST_NEXT;
+	}
+
+	return 0;
+}
+
 /**
  * pseries_eeh_of_probe - EEH probe on the given device
  * @dn: OF node
@@ -146,14 +188,16 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 {
 	struct eeh_dev *edev;
 	struct eeh_pe pe;
+	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *class_code, *vendor_id, *device_id;
 	const u32 *regs;
+	u32 pcie_flags;
 	int enable = 0;
 	int ret;
 
 	/* Retrieve OF node and eeh device */
 	edev = of_node_to_eeh_dev(dn);
-	if (!of_device_is_available(dn))
+	if (edev->pe || !of_device_is_available(dn))
 		return NULL;
 
 	/* Retrieve class/vendor/device IDs */
@@ -167,9 +211,26 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 	if (dn->type && !strcmp(dn->type, "isa"))
 		return NULL;
 
-	/* Update class code and mode of eeh device */
+	/*
+	 * Update class code and mode of eeh device. We need
+	 * correctly reflects that current device is root port
+	 * or PCIe switch downstream port.
+	 */
 	edev->class_code = *class_code;
-	edev->mode = 0;
+	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
+	edev->mode &= 0xFFFFFF00;
+	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		edev->mode |= EEH_DEV_BRIDGE;
+		if (edev->pcie_cap) {
+			rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+					 2, &pcie_flags);
+			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+				edev->mode |= EEH_DEV_ROOT_PORT;
+			else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+				edev->mode |= EEH_DEV_DS_PORT;
+		}
+	}
 
 	/* Retrieve the device address */
 	regs = of_get_property(dn, "reg", NULL);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 02d6e21619bb..8bad880bd177 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -146,7 +146,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	flags = 0;
 
 	/* Make pHyp happy */
-	if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
+	if ((rflags & _PAGE_NO_CACHE) && !(rflags & _PAGE_WRITETHRU))
 		hpte_r &= ~_PAGE_COHERENT;
 	if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N))
 		flags |= H_COALESCE_CAND;
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 7b3cbde8c783..721c0586b284 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -287,6 +287,9 @@ static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs)
 	unsigned long *savep;
 	struct rtas_error_log *h, *errhdr = NULL;
 
+	/* Mask top two bits */
+	regs->gpr[3] &= ~(0x3UL << 62);
+
 	if (!VALID_FWNMI_BUFFER(regs->gpr[3])) {
 		printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]);
 		return NULL;
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index b29e20b7862f..bb7af78e4eed 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -388,7 +388,6 @@ int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn)
 	/* Remove the EADS bridge device itself */
 	BUG_ON(!bus->self);
 	pr_debug("PCI: Now removing bridge device %s\n", pci_name(bus->self));
-	eeh_remove_bus_device(bus->self, true);
 	pci_stop_and_remove_bus_device(bus->self);
 
 	return 0;