[ARM] pxa/spitz: Formating and naming fixes
Improve formating so checkpatch passes. Also, change some function and variable names to make the naming consistent. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
This commit is contained in:
parent
2d679827e5
commit
084115946a
|
@ -133,10 +133,8 @@ static unsigned long spitz_pin_config[] __initdata = {
|
|||
* Scoop GPIO expander
|
||||
******************************************************************************/
|
||||
#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
|
||||
/*
|
||||
* Spitz SCOOP Device #1
|
||||
*/
|
||||
static struct resource spitz_scoop_resources[] = {
|
||||
/* SCOOP Device #1 */
|
||||
static struct resource spitz_scoop_1_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x10800000,
|
||||
.end = 0x10800fff,
|
||||
|
@ -144,7 +142,7 @@ static struct resource spitz_scoop_resources[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct scoop_config spitz_scoop_setup = {
|
||||
static struct scoop_config spitz_scoop_1_setup = {
|
||||
.io_dir = SPITZ_SCP_IO_DIR,
|
||||
.io_out = SPITZ_SCP_IO_OUT,
|
||||
.suspend_clr = SPITZ_SCP_SUS_CLR,
|
||||
|
@ -152,20 +150,18 @@ static struct scoop_config spitz_scoop_setup = {
|
|||
.gpio_base = SPITZ_SCP_GPIO_BASE,
|
||||
};
|
||||
|
||||
struct platform_device spitzscoop_device = {
|
||||
struct platform_device spitz_scoop_1_device = {
|
||||
.name = "sharp-scoop",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &spitz_scoop_setup,
|
||||
.platform_data = &spitz_scoop_1_setup,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(spitz_scoop_resources),
|
||||
.resource = spitz_scoop_resources,
|
||||
.num_resources = ARRAY_SIZE(spitz_scoop_1_resources),
|
||||
.resource = spitz_scoop_1_resources,
|
||||
};
|
||||
|
||||
/*
|
||||
* Spitz SCOOP Device #2
|
||||
*/
|
||||
static struct resource spitz_scoop2_resources[] = {
|
||||
/* SCOOP Device #2 */
|
||||
static struct resource spitz_scoop_2_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x08800040,
|
||||
.end = 0x08800fff,
|
||||
|
@ -173,7 +169,7 @@ static struct resource spitz_scoop2_resources[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct scoop_config spitz_scoop2_setup = {
|
||||
static struct scoop_config spitz_scoop_2_setup = {
|
||||
.io_dir = SPITZ_SCP2_IO_DIR,
|
||||
.io_out = SPITZ_SCP2_IO_OUT,
|
||||
.suspend_clr = SPITZ_SCP2_SUS_CLR,
|
||||
|
@ -181,23 +177,23 @@ static struct scoop_config spitz_scoop2_setup = {
|
|||
.gpio_base = SPITZ_SCP2_GPIO_BASE,
|
||||
};
|
||||
|
||||
struct platform_device spitzscoop2_device = {
|
||||
struct platform_device spitz_scoop_2_device = {
|
||||
.name = "sharp-scoop",
|
||||
.id = 1,
|
||||
.dev = {
|
||||
.platform_data = &spitz_scoop2_setup,
|
||||
.platform_data = &spitz_scoop_2_setup,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(spitz_scoop2_resources),
|
||||
.resource = spitz_scoop2_resources,
|
||||
.num_resources = ARRAY_SIZE(spitz_scoop_2_resources),
|
||||
.resource = spitz_scoop_2_resources,
|
||||
};
|
||||
|
||||
static void __init spitz_scoop_init(void)
|
||||
{
|
||||
platform_device_register(&spitz_scoop1_device);
|
||||
platform_device_register(&spitz_scoop_1_device);
|
||||
|
||||
/* Akita doesn't have the second SCOOP chip */
|
||||
if (!machine_is_akita())
|
||||
platform_device_register(&spitzscoop2_device);
|
||||
platform_device_register(&spitz_scoop_2_device);
|
||||
}
|
||||
|
||||
/* Power control is shared with between one of the CF slots and SD */
|
||||
|
@ -250,22 +246,22 @@ static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
|
|||
}
|
||||
|
||||
static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
|
||||
{
|
||||
.dev = &spitzscoop_device.dev,
|
||||
.irq = SPITZ_IRQ_GPIO_CF_IRQ,
|
||||
.cd_irq = SPITZ_IRQ_GPIO_CF_CD,
|
||||
.cd_irq_str = "PCMCIA0 CD",
|
||||
},{
|
||||
.dev = &spitzscoop2_device.dev,
|
||||
.irq = SPITZ_IRQ_GPIO_CF2_IRQ,
|
||||
.cd_irq = -1,
|
||||
},
|
||||
{
|
||||
.dev = &spitz_scoop_1_device.dev,
|
||||
.irq = SPITZ_IRQ_GPIO_CF_IRQ,
|
||||
.cd_irq = SPITZ_IRQ_GPIO_CF_CD,
|
||||
.cd_irq_str = "PCMCIA0 CD",
|
||||
}, {
|
||||
.dev = &spitz_scoop_2_device.dev,
|
||||
.irq = SPITZ_IRQ_GPIO_CF2_IRQ,
|
||||
.cd_irq = -1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct scoop_pcmcia_config spitz_pcmcia_config = {
|
||||
.devs = &spitz_pcmcia_scoop[0],
|
||||
.num_devs = 2,
|
||||
.power_ctrl = spitz_pcmcia_pwr,
|
||||
.devs = &spitz_pcmcia_scoop[0],
|
||||
.num_devs = 2,
|
||||
.power_ctrl = spitz_pcmcia_pwr,
|
||||
};
|
||||
|
||||
static void __init spitz_pcmcia_init(void)
|
||||
|
@ -300,7 +296,7 @@ static inline void spitz_pcmcia_init(void) {}
|
|||
#define SPITZ_KEY_OK KEY_F11
|
||||
#define SPITZ_KEY_MENU KEY_F12
|
||||
|
||||
static const uint32_t spitzkbd_keymap[] = {
|
||||
static const uint32_t spitz_keymap[] = {
|
||||
KEY(0, 0, KEY_LEFTCTRL),
|
||||
KEY(0, 1, KEY_1),
|
||||
KEY(0, 2, KEY_3),
|
||||
|
@ -367,38 +363,38 @@ static const uint32_t spitzkbd_keymap[] = {
|
|||
KEY(6, 8, KEY_RIGHT),
|
||||
};
|
||||
|
||||
static const struct matrix_keymap_data spitzkbd_keymap_data = {
|
||||
.keymap = spitzkbd_keymap,
|
||||
.keymap_size = ARRAY_SIZE(spitzkbd_keymap),
|
||||
static const struct matrix_keymap_data spitz_keymap_data = {
|
||||
.keymap = spitz_keymap,
|
||||
.keymap_size = ARRAY_SIZE(spitz_keymap),
|
||||
};
|
||||
|
||||
static const uint32_t spitzkbd_row_gpios[] =
|
||||
static const uint32_t spitz_row_gpios[] =
|
||||
{ 12, 17, 91, 34, 36, 38, 39 };
|
||||
static const uint32_t spitzkbd_col_gpios[] =
|
||||
static const uint32_t spitz_col_gpios[] =
|
||||
{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
|
||||
|
||||
static struct matrix_keypad_platform_data spitzkbd_pdata = {
|
||||
.keymap_data = &spitzkbd_keymap_data,
|
||||
.row_gpios = spitzkbd_row_gpios,
|
||||
.col_gpios = spitzkbd_col_gpios,
|
||||
.num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios),
|
||||
.num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios),
|
||||
static struct matrix_keypad_platform_data spitz_mkp_pdata = {
|
||||
.keymap_data = &spitz_keymap_data,
|
||||
.row_gpios = spitz_row_gpios,
|
||||
.col_gpios = spitz_col_gpios,
|
||||
.num_row_gpios = ARRAY_SIZE(spitz_row_gpios),
|
||||
.num_col_gpios = ARRAY_SIZE(spitz_col_gpios),
|
||||
.col_scan_delay_us = 10,
|
||||
.debounce_ms = 10,
|
||||
.wakeup = 1,
|
||||
};
|
||||
|
||||
static struct platform_device spitzkbd_device = {
|
||||
static struct platform_device spitz_mkp_device = {
|
||||
.name = "matrix-keypad",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &spitzkbd_pdata,
|
||||
.platform_data = &spitz_mkp_pdata,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init spitz_mkp_init(void)
|
||||
{
|
||||
platform_device_register(&spitzkbd_device);
|
||||
platform_device_register(&spitz_mkp_device);
|
||||
}
|
||||
#else
|
||||
static inline void spitz_mkp_init(void) {}
|
||||
|
@ -474,17 +470,17 @@ static struct gpio_led_platform_data spitz_gpio_leds_info = {
|
|||
.num_leds = ARRAY_SIZE(spitz_gpio_leds),
|
||||
};
|
||||
|
||||
static struct platform_device spitzled_device = {
|
||||
static struct platform_device spitz_led_device = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &spitz_gpio_leds_info,
|
||||
.platform_data = &spitz_gpio_leds_info,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init spitz_leds_init(void)
|
||||
{
|
||||
platform_device_register(&spitzled_device);
|
||||
platform_device_register(&spitz_led_device);
|
||||
}
|
||||
#else
|
||||
static inline void spitz_leds_init(void) {}
|
||||
|
@ -494,7 +490,7 @@ static inline void spitz_leds_init(void) {}
|
|||
* SSP Devices
|
||||
******************************************************************************/
|
||||
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
|
||||
static void spitz_wait_for_hsync(void)
|
||||
static void spitz_ads7846_wait_for_hsync(void)
|
||||
{
|
||||
while (gpio_get_value(SPITZ_GPIO_HSYNC))
|
||||
cpu_relax();
|
||||
|
@ -510,7 +506,7 @@ static struct ads7846_platform_data spitz_ads7846_info = {
|
|||
.y_plate_ohms = 486,
|
||||
.pressure_max = 1024,
|
||||
.gpio_pendown = SPITZ_GPIO_TP_INT,
|
||||
.wait_for_sync = spitz_wait_for_hsync,
|
||||
.wait_for_sync = spitz_ads7846_wait_for_hsync,
|
||||
};
|
||||
|
||||
static struct pxa2xx_spi_chip spitz_ads7846_chip = {
|
||||
|
@ -548,26 +544,26 @@ static struct pxa2xx_spi_chip spitz_max1111_chip = {
|
|||
|
||||
static struct spi_board_info spitz_spi_devices[] = {
|
||||
{
|
||||
.modalias = "ads7846",
|
||||
.max_speed_hz = 1200000,
|
||||
.bus_num = 2,
|
||||
.chip_select = 0,
|
||||
.platform_data = &spitz_ads7846_info,
|
||||
.controller_data= &spitz_ads7846_chip,
|
||||
.irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
|
||||
.modalias = "ads7846",
|
||||
.max_speed_hz = 1200000,
|
||||
.bus_num = 2,
|
||||
.chip_select = 0,
|
||||
.platform_data = &spitz_ads7846_info,
|
||||
.controller_data = &spitz_ads7846_chip,
|
||||
.irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
|
||||
}, {
|
||||
.modalias = "corgi-lcd",
|
||||
.max_speed_hz = 50000,
|
||||
.bus_num = 2,
|
||||
.chip_select = 1,
|
||||
.platform_data = &spitz_lcdcon_info,
|
||||
.controller_data= &spitz_lcdcon_chip,
|
||||
.modalias = "corgi-lcd",
|
||||
.max_speed_hz = 50000,
|
||||
.bus_num = 2,
|
||||
.chip_select = 1,
|
||||
.platform_data = &spitz_lcdcon_info,
|
||||
.controller_data = &spitz_lcdcon_chip,
|
||||
}, {
|
||||
.modalias = "max1111",
|
||||
.max_speed_hz = 450000,
|
||||
.bus_num = 2,
|
||||
.chip_select = 2,
|
||||
.controller_data= &spitz_max1111_chip,
|
||||
.modalias = "max1111",
|
||||
.max_speed_hz = 450000,
|
||||
.bus_num = 2,
|
||||
.chip_select = 2,
|
||||
.controller_data = &spitz_max1111_chip,
|
||||
},
|
||||
};
|
||||
|
||||
|
@ -575,7 +571,7 @@ static struct pxa2xx_spi_master spitz_spi_info = {
|
|||
.num_chipselect = 3,
|
||||
};
|
||||
|
||||
static void __init spitz_init_spi(void)
|
||||
static void __init spitz_spi_init(void)
|
||||
{
|
||||
struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
|
||||
|
||||
|
@ -588,7 +584,7 @@ static void __init spitz_init_spi(void)
|
|||
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
|
||||
}
|
||||
#else
|
||||
static inline void spitz_init_spi(void) {}
|
||||
static inline void spitz_spi_init(void) {}
|
||||
#endif
|
||||
|
||||
/******************************************************************************
|
||||
|
@ -612,7 +608,7 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
|
|||
static struct pxamci_platform_data spitz_mci_platform_data = {
|
||||
.detect_delay_ms = 250,
|
||||
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
||||
.setpower = spitz_mci_setpower,
|
||||
.setpower = spitz_mci_setpower,
|
||||
.gpio_card_detect = SPITZ_GPIO_nSD_DETECT,
|
||||
.gpio_card_ro = SPITZ_GPIO_nSD_WP,
|
||||
.gpio_power = -1,
|
||||
|
@ -691,31 +687,31 @@ static inline void spitz_irda_init(void) {}
|
|||
******************************************************************************/
|
||||
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
||||
static struct pxafb_mode_info spitz_pxafb_modes[] = {
|
||||
{
|
||||
.pixclock = 19231,
|
||||
.xres = 480,
|
||||
.yres = 640,
|
||||
.bpp = 16,
|
||||
.hsync_len = 40,
|
||||
.left_margin = 46,
|
||||
.right_margin = 125,
|
||||
.vsync_len = 3,
|
||||
.upper_margin = 1,
|
||||
.lower_margin = 0,
|
||||
.sync = 0,
|
||||
},{
|
||||
.pixclock = 134617,
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.bpp = 16,
|
||||
.hsync_len = 20,
|
||||
.left_margin = 20,
|
||||
.right_margin = 46,
|
||||
.vsync_len = 2,
|
||||
.upper_margin = 1,
|
||||
.lower_margin = 0,
|
||||
.sync = 0,
|
||||
},
|
||||
{
|
||||
.pixclock = 19231,
|
||||
.xres = 480,
|
||||
.yres = 640,
|
||||
.bpp = 16,
|
||||
.hsync_len = 40,
|
||||
.left_margin = 46,
|
||||
.right_margin = 125,
|
||||
.vsync_len = 3,
|
||||
.upper_margin = 1,
|
||||
.lower_margin = 0,
|
||||
.sync = 0,
|
||||
}, {
|
||||
.pixclock = 134617,
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.bpp = 16,
|
||||
.hsync_len = 20,
|
||||
.left_margin = 20,
|
||||
.right_margin = 46,
|
||||
.vsync_len = 2,
|
||||
.upper_margin = 1,
|
||||
.lower_margin = 0,
|
||||
.sync = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct pxafb_mach_info spitz_pxafb_info = {
|
||||
|
@ -737,17 +733,15 @@ static inline void spitz_lcd_init(void) {}
|
|||
* Framebuffer
|
||||
******************************************************************************/
|
||||
#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
|
||||
static struct mtd_partition sharpsl_nand_partitions[] = {
|
||||
static struct mtd_partition spitz_nand_partitions[] = {
|
||||
{
|
||||
.name = "System Area",
|
||||
.offset = 0,
|
||||
.size = 7 * 1024 * 1024,
|
||||
},
|
||||
{
|
||||
}, {
|
||||
.name = "Root Filesystem",
|
||||
.offset = 7 * 1024 * 1024,
|
||||
},
|
||||
{
|
||||
}, {
|
||||
.name = "Home Filesystem",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
|
@ -756,14 +750,14 @@ static struct mtd_partition sharpsl_nand_partitions[] = {
|
|||
|
||||
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
|
||||
|
||||
static struct nand_bbt_descr sharpsl_bbt = {
|
||||
.options = 0,
|
||||
.offs = 4,
|
||||
.len = 2,
|
||||
.pattern = scan_ff_pattern
|
||||
static struct nand_bbt_descr spitz_nand_bbt = {
|
||||
.options = 0,
|
||||
.offs = 4,
|
||||
.len = 2,
|
||||
.pattern = scan_ff_pattern
|
||||
};
|
||||
|
||||
static struct nand_ecclayout spitz_akita_oobinfo = {
|
||||
static struct nand_ecclayout akita_oobinfo = {
|
||||
.oobfree = { {0x08, 0x09} },
|
||||
.eccbytes = 24,
|
||||
.eccpos = {
|
||||
|
@ -773,13 +767,13 @@ static struct nand_ecclayout spitz_akita_oobinfo = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
|
||||
.badblock_pattern = &sharpsl_bbt,
|
||||
.partitions = sharpsl_nand_partitions,
|
||||
.nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
|
||||
static struct sharpsl_nand_platform_data spitz_nand_pdata = {
|
||||
.badblock_pattern = &spitz_nand_bbt,
|
||||
.partitions = spitz_nand_partitions,
|
||||
.nr_partitions = ARRAY_SIZE(spitz_nand_partitions),
|
||||
};
|
||||
|
||||
static struct resource sharpsl_nand_resources[] = {
|
||||
static struct resource spitz_nand_resources[] = {
|
||||
{
|
||||
.start = PXA_CS3_PHYS,
|
||||
.end = PXA_CS3_PHYS + SZ_4K - 1,
|
||||
|
@ -787,31 +781,31 @@ static struct resource sharpsl_nand_resources[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct platform_device sharpsl_nand_device = {
|
||||
static struct platform_device spitz_nand_device = {
|
||||
.name = "sharpsl-nand",
|
||||
.id = -1,
|
||||
.resource = sharpsl_nand_resources,
|
||||
.num_resources = ARRAY_SIZE(sharpsl_nand_resources),
|
||||
.resource = spitz_nand_resources,
|
||||
.num_resources = ARRAY_SIZE(spitz_nand_resources),
|
||||
.dev = {
|
||||
.platform_data = &sharpsl_nand_platform_data,
|
||||
.platform_data = &spitz_nand_pdata,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init spitz_nand_init(void)
|
||||
{
|
||||
if (machine_is_spitz()) {
|
||||
sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
|
||||
spitz_nand_partitions[1].size = 5 * 1024 * 1024;
|
||||
} else if (machine_is_akita()) {
|
||||
sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
|
||||
sharpsl_nand_bbt.len = 1;
|
||||
sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo;
|
||||
spitz_nand_partitions[1].size = 58 * 1024 * 1024;
|
||||
spitz_nand_bbt.len = 1;
|
||||
spitz_nand_pdata.ecc_layout = &akita_oobinfo;
|
||||
} else if (machine_is_borzoi()) {
|
||||
sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
|
||||
sharpsl_nand_bbt.len = 1;
|
||||
sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo;
|
||||
spitz_nand_partitions[1].size = 32 * 1024 * 1024;
|
||||
spitz_nand_bbt.len = 1;
|
||||
spitz_nand_pdata.ecc_layout = &akita_oobinfo;
|
||||
}
|
||||
|
||||
platform_device_register(&sharpsl_nand_device);
|
||||
platform_device_register(&spitz_nand_device);
|
||||
}
|
||||
#else
|
||||
static inline void spitz_nand_init(void) {}
|
||||
|
@ -821,7 +815,7 @@ static inline void spitz_nand_init(void) {}
|
|||
* NOR Flash
|
||||
******************************************************************************/
|
||||
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
|
||||
static struct mtd_partition sharpsl_rom_parts[] = {
|
||||
static struct mtd_partition spitz_rom_parts[] = {
|
||||
{
|
||||
.name ="Boot PROM Filesystem",
|
||||
.offset = 0x00140000,
|
||||
|
@ -829,13 +823,13 @@ static struct mtd_partition sharpsl_rom_parts[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data sharpsl_rom_data = {
|
||||
static struct physmap_flash_data spitz_rom_data = {
|
||||
.width = 2,
|
||||
.nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
|
||||
.parts = sharpsl_rom_parts,
|
||||
.nr_parts = ARRAY_SIZE(spitz_rom_parts),
|
||||
.parts = spitz_rom_parts,
|
||||
};
|
||||
|
||||
static struct resource sharpsl_rom_resources[] = {
|
||||
static struct resource spitz_rom_resources[] = {
|
||||
{
|
||||
.start = PXA_CS0_PHYS,
|
||||
.end = PXA_CS0_PHYS + SZ_8M - 1,
|
||||
|
@ -843,19 +837,19 @@ static struct resource sharpsl_rom_resources[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct platform_device sharpsl_rom_device = {
|
||||
.name = "physmap-flash",
|
||||
.id = -1,
|
||||
.resource = sharpsl_rom_resources,
|
||||
.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
|
||||
static struct platform_device spitz_rom_device = {
|
||||
.name = "physmap-flash",
|
||||
.id = -1,
|
||||
.resource = spitz_rom_resources,
|
||||
.num_resources = ARRAY_SIZE(spitz_rom_resources),
|
||||
.dev = {
|
||||
.platform_data = &sharpsl_rom_data,
|
||||
.platform_data = &spitz_rom_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init spitz_nor_init(void)
|
||||
{
|
||||
platform_device_register(&sharpsl_rom_device);
|
||||
platform_device_register(&spitz_rom_device);
|
||||
}
|
||||
#else
|
||||
static inline void spitz_nor_init(void) {}
|
||||
|
@ -959,7 +953,7 @@ static void __init spitz_init(void)
|
|||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
|
||||
spitz_init_spi();
|
||||
spitz_spi_init();
|
||||
spitz_scoop_init();
|
||||
spitz_mkp_init();
|
||||
spitz_keys_init();
|
||||
|
@ -974,7 +968,7 @@ static void __init spitz_init(void)
|
|||
spitz_i2c_init();
|
||||
}
|
||||
|
||||
static void __init fixup_spitz(struct machine_desc *desc,
|
||||
static void __init spitz_fixup(struct machine_desc *desc,
|
||||
struct tag *tags, char **cmdline, struct meminfo *mi)
|
||||
{
|
||||
sharpsl_save_param();
|
||||
|
@ -988,7 +982,7 @@ static void __init fixup_spitz(struct machine_desc *desc,
|
|||
MACHINE_START(SPITZ, "SHARP Spitz")
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.fixup = fixup_spitz,
|
||||
.fixup = spitz_fixup,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa27x_init_irq,
|
||||
.init_machine = spitz_init,
|
||||
|
@ -1000,7 +994,7 @@ MACHINE_END
|
|||
MACHINE_START(BORZOI, "SHARP Borzoi")
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.fixup = fixup_spitz,
|
||||
.fixup = spitz_fixup,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa27x_init_irq,
|
||||
.init_machine = spitz_init,
|
||||
|
@ -1012,7 +1006,7 @@ MACHINE_END
|
|||
MACHINE_START(AKITA, "SHARP Akita")
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.fixup = fixup_spitz,
|
||||
.fixup = spitz_fixup,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa27x_init_irq,
|
||||
.init_machine = spitz_init,
|
||||
|
|
Loading…
Reference in a new issue