redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'linus' into perfcounters/urgent 

Merge reason: this branch was on a .30-ish base before, update
              it to an almost-.31-rc2 upstream base to pick up fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
hifive-unleashed-5.1
Ingo Molnar 2009-07-01 09:56:10 +02:00
parent fb9c818873 e83c2b0ff3
commit 087021ba41
1289 changed files with 53945 additions and 16213 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Documentation/ABI/testing/sysfs-bus-pci
View File

@ -122,3 +122,10 @@ Description:
This symbolic link appears when a device is a Virtual Function.
The symbolic link points to the PCI device sysfs entry of the
Physical Function this device associates with.
What: /sys/bus/pci/slots/.../module
Date: June 2009
Contact: linux-pci@vger.kernel.org
Description:
This symbolic link points to the PCI hotplug controller driver
module that manages the hotplug slot.

125
Documentation/ABI/testing/sysfs-class-mtd 100644
View File

@ -0,0 +1,125 @@
What: /sys/class/mtd/
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
The mtd/ class subdirectory belongs to the MTD subsystem
(MTD core).
What: /sys/class/mtd/mtdX/
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
to each /dev/mtdX character device. These may represent
physical/simulated flash devices, partitions on a flash
device, or concatenated flash devices. They exist regardless
of whether CONFIG_MTD_CHAR is actually enabled.
What: /sys/class/mtd/mtdXro/
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
These directories provide the corresponding read-only device
nodes for /sys/class/mtd/mtdX/ . They are only created
(for the benefit of udev) if CONFIG_MTD_CHAR is enabled.
What: /sys/class/mtd/mtdX/dev
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
Major and minor numbers of the character device corresponding
to this MTD device (in <major>:<minor> format). This is the
read-write device so <minor> will be even.
What: /sys/class/mtd/mtdXro/dev
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
Major and minor numbers of the character device corresponding
to the read-only variant of thie MTD device (in
<major>:<minor> format). In this case <minor> will be odd.
What: /sys/class/mtd/mtdX/erasesize
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
"Major" erase size for the device. If numeraseregions is
zero, this is the eraseblock size for the entire device.
Otherwise, the MEMGETREGIONCOUNT/MEMGETREGIONINFO ioctls
can be used to determine the actual eraseblock layout.
What: /sys/class/mtd/mtdX/flags
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
A hexadecimal value representing the device flags, ORed
together:
0x0400: MTD_WRITEABLE - device is writable
0x0800: MTD_BIT_WRITEABLE - single bits can be flipped
0x1000: MTD_NO_ERASE - no erase necessary
0x2000: MTD_POWERUP_LOCK - always locked after reset
What: /sys/class/mtd/mtdX/name
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
A human-readable ASCII name for the device or partition.
This will match the name in /proc/mtd .
What: /sys/class/mtd/mtdX/numeraseregions
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
For devices that have variable eraseblock sizes, this
provides the total number of erase regions. Otherwise,
it will read back as zero.
What: /sys/class/mtd/mtdX/oobsize
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
Number of OOB bytes per page.
What: /sys/class/mtd/mtdX/size
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
Total size of the device/partition, in bytes.
What: /sys/class/mtd/mtdX/type
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
One of the following ASCII strings, representing the device
type:
absent, ram, rom, nor, nand, dataflash, ubi, unknown
What: /sys/class/mtd/mtdX/writesize
Date: April 2009
KernelVersion: 2.6.29
Contact: linux-mtd@lists.infradead.org
Description:
Minimal writable flash unit size. This will always be
a positive integer.
In the case of NOR flash it is 1 (even though individual
bits can be cleared).
In the case of NAND flash it is one NAND page (or a
half page, or a quarter page).
In the case of ECC NOR, it is the ECC block size.

25
Documentation/PCI/pcieaer-howto.txt
View File

@ -61,6 +61,10 @@ be initiated although firmwares have no _OSC support. To enable the
walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line
when booting kernel. Note that forceload=n by default.
nosourceid, another parameter of type bool, can be used when broken
hardware (mostly chipsets) has root ports that cannot obtain the reporting
source ID. nosourceid=n by default.
2.3 AER error output
When a PCI-E AER error is captured, an error message will be outputed to
console. If it's a correctable error, it is outputed as a warning.
@ -246,3 +250,24 @@ with the PCI Express AER Root driver?
A: It could call the helper functions to enable AER in devices and
cleanup uncorrectable status register. Pls. refer to section 3.3.
4. Software error injection
Debugging PCIE AER error recovery code is quite difficult because it
is hard to trigger real hardware errors. Software based error
injection can be used to fake various kinds of PCIE errors.
First you should enable PCIE AER software error injection in kernel
configuration, that is, following item should be in your .config.
CONFIG_PCIEAER_INJECT=y or CONFIG_PCIEAER_INJECT=m
After reboot with new kernel or insert the module, a device file named
/dev/aer_inject should be created.
Then, you need a user space tool named aer-inject, which can be gotten
from:
http://www.kernel.org/pub/linux/utils/pci/aer-inject/
More information about aer-inject can be found in the document comes
with its source code.

12
Documentation/cgroups/cpusets.txt
View File

@ -777,6 +777,18 @@ in cpuset directories:
# /bin/echo 1-4 > cpus -> set cpus list to cpus 1,2,3,4
# /bin/echo 1,2,3,4 > cpus -> set cpus list to cpus 1,2,3,4
To add a CPU to a cpuset, write the new list of CPUs including the
CPU to be added. To add 6 to the above cpuset:
# /bin/echo 1-4,6 > cpus -> set cpus list to cpus 1,2,3,4,6
Similarly to remove a CPU from a cpuset, write the new list of CPUs
without the CPU to be removed.
To remove all the CPUs:
# /bin/echo "" > cpus -> clear cpus list
2.3 Setting flags
-----------------

54
Documentation/device-mapper/dm-log.txt 100644
View File

@ -0,0 +1,54 @@
Device-Mapper Logging
=====================
The device-mapper logging code is used by some of the device-mapper
RAID targets to track regions of the disk that are not consistent.
A region (or portion of the address space) of the disk may be
inconsistent because a RAID stripe is currently being operated on or
a machine died while the region was being altered. In the case of
mirrors, a region would be considered dirty/inconsistent while you
are writing to it because the writes need to be replicated for all
the legs of the mirror and may not reach the legs at the same time.
Once all writes are complete, the region is considered clean again.
There is a generic logging interface that the device-mapper RAID
implementations use to perform logging operations (see
dm_dirty_log_type in include/linux/dm-dirty-log.h). Various different
logging implementations are available and provide different
capabilities. The list includes:
Type Files
==== =====
disk drivers/md/dm-log.c
core drivers/md/dm-log.c
userspace drivers/md/dm-log-userspace* include/linux/dm-log-userspace.h
The "disk" log type
-------------------
This log implementation commits the log state to disk. This way, the
logging state survives reboots/crashes.
The "core" log type
-------------------
This log implementation keeps the log state in memory. The log state
will not survive a reboot or crash, but there may be a small boost in
performance. This method can also be used if no storage device is
available for storing log state.
The "userspace" log type
------------------------
This log type simply provides a way to export the log API to userspace,
so log implementations can be done there. This is done by forwarding most
logging requests to userspace, where a daemon receives and processes the
request.
The structure used for communication between kernel and userspace are
located in include/linux/dm-log-userspace.h. Due to the frequency,
diversity, and 2-way communication nature of the exchanges between
kernel and userspace, 'connector' is used as the interface for
communication.
There are currently two userspace log implementations that leverage this
framework - "clustered_disk" and "clustered_core". These implementations
provide a cluster-coherent log for shared-storage. Device-mapper mirroring
can be used in a shared-storage environment when the cluster log implementations
are employed.

39
Documentation/device-mapper/dm-queue-length.txt 100644
View File

@ -0,0 +1,39 @@
dm-queue-length
===============
dm-queue-length is a path selector module for device-mapper targets,
which selects a path with the least number of in-flight I/Os.
The path selector name is 'queue-length'.
Table parameters for each path: [<repeat_count>]
<repeat_count>: The number of I/Os to dispatch using the selected
path before switching to the next path.
If not given, internal default is used. To check
the default value, see the activated table.
Status for each path: <status> <fail-count> <in-flight>
<status>: 'A' if the path is active, 'F' if the path is failed.
<fail-count>: The number of path failures.
<in-flight>: The number of in-flight I/Os on the path.
Algorithm
=========
dm-queue-length increments/decrements 'in-flight' when an I/O is
dispatched/completed respectively.
dm-queue-length selects a path with the minimum 'in-flight'.
Examples
========
In case that 2 paths (sda and sdb) are used with repeat_count == 128.
# echo "0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128" \
dmsetup create test
#
# dmsetup table
test: 0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128
#
# dmsetup status
test: 0 10 multipath 2 0 0 0 1 1 E 0 2 1 8:0 A 0 0 8:16 A 0 0

91
Documentation/device-mapper/dm-service-time.txt 100644
View File

@ -0,0 +1,91 @@
dm-service-time
===============
dm-service-time is a path selector module for device-mapper targets,
which selects a path with the shortest estimated service time for
the incoming I/O.
The service time for each path is estimated by dividing the total size
of in-flight I/Os on a path with the performance value of the path.
The performance value is a relative throughput value among all paths
in a path-group, and it can be specified as a table argument.
The path selector name is 'service-time'.
Table parameters for each path: [<repeat_count> [<relative_throughput>]]
<repeat_count>: The number of I/Os to dispatch using the selected
path before switching to the next path.
If not given, internal default is used. To check
the default value, see the activated table.
<relative_throughput>: The relative throughput value of the path
among all paths in the path-group.
The valid range is 0-100.
If not given, minimum value '1' is used.
If '0' is given, the path isn't selected while
other paths having a positive value are available.
Status for each path: <status> <fail-count> <in-flight-size> \
<relative_throughput>
<status>: 'A' if the path is active, 'F' if the path is failed.
<fail-count>: The number of path failures.
<in-flight-size>: The size of in-flight I/Os on the path.
<relative_throughput>: The relative throughput value of the path
among all paths in the path-group.
Algorithm
=========
dm-service-time adds the I/O size to 'in-flight-size' when the I/O is
dispatched and substracts when completed.
Basically, dm-service-time selects a path having minimum service time
which is calculated by:
('in-flight-size' + 'size-of-incoming-io') / 'relative_throughput'
However, some optimizations below are used to reduce the calculation
as much as possible.
1. If the paths have the same 'relative_throughput', skip
the division and just compare the 'in-flight-size'.
2. If the paths have the same 'in-flight-size', skip the division
and just compare the 'relative_throughput'.
3. If some paths have non-zero 'relative_throughput' and others
have zero 'relative_throughput', ignore those paths with zero
'relative_throughput'.
If such optimizations can't be applied, calculate service time, and
compare service time.
If calculated service time is equal, the path having maximum
'relative_throughput' may be better. So compare 'relative_throughput'
then.
Examples
========
In case that 2 paths (sda and sdb) are used with repeat_count == 128
and sda has an average throughput 1GB/s and sdb has 4GB/s,
'relative_throughput' value may be '1' for sda and '4' for sdb.
# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \
dmsetup create test
#
# dmsetup table
test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4
#
# dmsetup status
test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4
Or '2' for sda and '8' for sdb would be also true.
# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \
dmsetup create test
#
# dmsetup table
test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8
#
# dmsetup status
test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8

4
Documentation/filesystems/00-INDEX
View File

@ -66,6 +66,10 @@ mandatory-locking.txt
- info on the Linux implementation of Sys V mandatory file locking.
ncpfs.txt
- info on Novell Netware(tm) filesystem using NCP protocol.
nfs41-server.txt
- info on the Linux server implementation of NFSv4 minor version 1.
nfs-rdma.txt
- how to install and setup the Linux NFS/RDMA client and server software.
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
nilfs2.txt

41
Documentation/filesystems/Locking
View File

@ -109,27 +109,28 @@ prototypes:
locking rules:
All may block.
BKL s_lock s_umount
alloc_inode: no no no
destroy_inode: no
dirty_inode: no (must not sleep)
write_inode: no
drop_inode: no !!!inode_lock!!!
delete_inode: no
put_super: yes yes no
write_super: no yes read
sync_fs: no no read
freeze_fs: ?
unfreeze_fs: ?
statfs: no no no
remount_fs: yes yes maybe (see below)
clear_inode: no
umount_begin: yes no no
show_options: no (vfsmount->sem)
quota_read: no no no (see below)
quota_write: no no no (see below)
None have BKL
s_umount
alloc_inode:
destroy_inode:
dirty_inode: (must not sleep)
write_inode:
drop_inode: !!!inode_lock!!!
delete_inode:
put_super: write
write_super: read
sync_fs: read
freeze_fs: read
unfreeze_fs: read
statfs: no
remount_fs: maybe (see below)
clear_inode:
umount_begin: no
show_options: no (namespace_sem)
quota_read: no (see below)
quota_write: no (see below)
->remount_fs() will have the s_umount lock if it's already mounted.
->remount_fs() will have the s_umount exclusive lock if it's already mounted.
When called from get_sb_single, it does NOT have the s_umount lock.
->quota_read() and ->quota_write() functions are both guaranteed to
be the only ones operating on the quota file by the quota code (via

25
Documentation/gcov.txt
View File

@ -188,13 +188,18 @@ Solution: Exclude affected source files from profiling by specifying
GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
corresponding Makefile.
Problem: Files copied from sysfs appear empty or incomplete.
Cause: Due to the way seq_file works, some tools such as cp or tar
may not correctly copy files from sysfs.
Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
Alternatively use the mechanism shown in Appendix B.
Appendix A: gather_on_build.sh
==============================
Sample script to gather coverage meta files on the build machine
(see 6a):
#!/bin/bash
KSRC=$1
@ -226,7 +231,7 @@ Appendix B: gather_on_test.sh
Sample script to gather coverage data files on the test machine
(see 6b):
#!/bin/bash
#!/bin/bash -e
DEST=$1
GCDA=/sys/kernel/debug/gcov
@ -236,11 +241,13 @@ if [ -z "$DEST" ] ; then
exit 1
fi
find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
TEMPDIR=$(mktemp -d)
echo Collecting data..
find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
tar czf $DEST -C $TEMPDIR sys
rm -rf $TEMPDIR
if [ $? -eq 0 ] ; then
echo "$DEST successfully created, copy to build system and unpack with:"
echo " tar xfz $DEST"
else
echo "Could not create file $DEST"
fi
echo "$DEST successfully created, copy to build system and unpack with:"
echo " tar xfz $DEST"

19
Documentation/isdn/00-INDEX
View File

@ -14,25 +14,14 @@ README
- general info on what you need and what to do for Linux ISDN.
README.FAQ
- general info for FAQ.
README.audio
- info for running audio over ISDN.
README.fax
- info for using Fax over ISDN.
README.gigaset
- info on the drivers for Siemens Gigaset ISDN adapters.
README.icn
- info on the ICN-ISDN-card and its driver.
>>>>>>> 93af7aca44f0e82e67bda10a0fb73d383edcc8bd:Documentation/isdn/00-INDEX
README.HiSax
- info on the HiSax driver which replaces the old teles.
README.act2000
- info on driver for IBM ACT-2000 card.
README.audio
- info for running audio over ISDN.
README.avmb1
- info on driver for AVM-B1 ISDN card.
README.act2000
- info on driver for IBM ACT-2000 card.
README.eicon
- info on driver for Eicon active cards.
README.concap
- info on "CONCAP" encapsulation protocol interface used for X.25.
README.diversion
@ -59,7 +48,3 @@ README.x25
- info for running X.25 over ISDN.
syncPPP.FAQ
- frequently asked questions about running PPP over ISDN.
README.hysdn
- info on driver for Hypercope active HYSDN cards
README.mISDN
- info on the Modular ISDN subsystem (mISDN).

58
Documentation/kernel-parameters.txt
View File

@ -229,14 +229,6 @@ and is between 256 and 4096 characters. It is defined in the file
to assume that this machine's pmtimer latches its value
and always returns good values.
acpi.power_nocheck= [HW,ACPI]
Format: 1/0 enable/disable the check of power state.
On some bogus BIOS the _PSC object/_STA object of
power resource can't return the correct device power
state. In such case it is unneccessary to check its
power state again in power transition.
1 : disable the power state check
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
@ -1006,6 +998,7 @@ and is between 256 and 4096 characters. It is defined in the file
nomerge
forcesac
soft
pt [x86, IA64]
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
@ -1369,6 +1362,27 @@ and is between 256 and 4096 characters. It is defined in the file
min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this
physical address is ignored.
mini2440= [ARM,HW,KNL]
Format:[0..2][b][c][t]
Default: "0tb"
MINI2440 configuration specification:
0 - The attached screen is the 3.5" TFT
1 - The attached screen is the 7" TFT
2 - The VGA Shield is attached (1024x768)
Leaving out the screen size parameter will not load
the TFT driver, and the framebuffer will be left
unconfigured.
b - Enable backlight. The TFT backlight pin will be
linked to the kernel VESA blanking code and a GPIO
LED. This parameter is not necessary when using the
VGA shield.
c - Enable the s3c camera interface.
t - Reserved for enabling touchscreen support. The
touchscreen support is not enabled in the mainstream
kernel as of 2.6.30, a preliminary port can be found
in the "bleeding edge" mini2440 support kernel at
http://repo.or.cz/w/linux-2.6/mini2440.git
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
parameter allows control of the logging verbosity for
@ -1410,6 +1424,16 @@ and is between 256 and 4096 characters. It is defined in the file
mtdparts= [MTD]
See drivers/mtd/cmdlinepart.c.
onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration
Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
boundary - index of last SLC block on Flex-OneNAND.
The remaining blocks are configured as MLC blocks.
lock - Configure if Flex-OneNAND boundary should be locked.
Once locked, the boundary cannot be changed.
1 indicates lock status, 0 indicates unlock status.
mtdset= [ARM]
ARM/S3C2412 JIVE boot control
@ -1776,6 +1800,9 @@ and is between 256 and 4096 characters. It is defined in the file
root domains (aka PCI segments, in ACPI-speak).
nommconf [X86] Disable use of MMCONFIG for PCI
Configuration
check_enable_amd_mmconf [X86] check for and enable
properly configured MMIO access to PCI
config space on AMD family 10h CPU
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
disable the use of MSI interrupts system-wide.
@ -1865,6 +1892,12 @@ and is between 256 and 4096 characters. It is defined in the file
PAGE_SIZE is used as alignment.
PCI-PCI bridge can be specified, if resource
windows need to be expanded.
ecrc= Enable/disable PCIe ECRC (transaction layer
end-to-end CRC checking).
bios: Use BIOS/firmware settings. This is the
the default.
off: Turn ECRC off
on: Turn ECRC on.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
@ -1882,6 +1915,12 @@ and is between 256 and 4096 characters. It is defined in the file
Format: { 0 | 1 }
See arch/parisc/kernel/pdc_chassis.c
percpu_alloc= [X86] Select which percpu first chunk allocator to use.
Allowed values are one of "lpage", "embed" and "4k".
See comments in arch/x86/kernel/setup_percpu.c for
details on each allocator. This parameter is primarily
for debugging and performance comparison.
pf. [PARIDE]
See Documentation/blockdev/paride.txt.
@ -2434,7 +2473,8 @@ and is between 256 and 4096 characters. It is defined in the file
tp720= [HW,PS2]
trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
trace_buf_size=nn[KMG]
[FTRACE] will set tracing buffer size.
trix= [HW,OSS] MediaTrix AudioTrix Pro
Format:

23
Documentation/kmemleak.txt
View File

@ -16,13 +16,17 @@ Usage
-----
CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
thread scans the memory every 10 minutes (by default) and prints any new
unreferenced objects found. To trigger an intermediate scan and display
all the possible memory leaks:
thread scans the memory every 10 minutes (by default) and prints the
number of new unreferenced objects found. To display the details of all
the possible memory leaks:
# mount -t debugfs nodev /sys/kernel/debug/
# cat /sys/kernel/debug/kmemleak
To trigger an intermediate memory scan:
# echo scan > /sys/kernel/debug/kmemleak
Note that the orphan objects are listed in the order they were allocated
and one object at the beginning of the list may cause other subsequent
objects to be reported as orphan.
@ -31,16 +35,21 @@ Memory scanning parameters can be modified at run-time by writing to the
/sys/kernel/debug/kmemleak file. The following parameters are supported:
off - disable kmemleak (irreversible)
stack=on - enable the task stacks scanning
stack=on - enable the task stacks scanning (default)
stack=off - disable the tasks stacks scanning
scan=on - start the automatic memory scanning thread
scan=on - start the automatic memory scanning thread (default)
scan=off - stop the automatic memory scanning thread
scan=<secs> - set the automatic memory scanning period in seconds (0
to disable it)
scan=<secs> - set the automatic memory scanning period in seconds
(default 600, 0 to stop the automatic scanning)
scan - trigger a memory scan
Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
the kernel command line.
Memory may be allocated or freed before kmemleak is initialised and
these actions are stored in an early log buffer. The size of this buffer
is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
Basic Algorithm
---------------

47
Documentation/laptops/thinkpad-acpi.txt
View File

@ -920,7 +920,7 @@ The available commands are:
echo '<LED number> off' >/proc/acpi/ibm/led
echo '<LED number> blink' >/proc/acpi/ibm/led
The <LED number> range is 0 to 7. The set of LEDs that can be
The <LED number> range is 0 to 15. The set of LEDs that can be
controlled varies from model to model. Here is the common ThinkPad
mapping:
@ -932,6 +932,11 @@ mapping:
5 - UltraBase battery slot
6 - (unknown)
7 - standby
8 - dock status 1
9 - dock status 2
10, 11 - (unknown)
12 - thinkvantage
13, 14, 15 - (unknown)
All of the above can be turned on and off and can be made to blink.
@ -940,10 +945,12 @@ sysfs notes:
The ThinkPad LED sysfs interface is described in detail by the LED class
documentation, in Documentation/leds-class.txt.
The leds are named (in LED ID order, from 0 to 7):
The LEDs are named (in LED ID order, from 0 to 12):
"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
"tpacpi::unknown_led", "tpacpi::standby".
"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1",
"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3",
"tpacpi::thinkvantage".
Due to limitations in the sysfs LED class, if the status of the LED
indicators cannot be read due to an error, thinkpad-acpi will report it as
@ -958,6 +965,12 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the
"timer" trigger, and leave the delay_on and delay_off parameters set to
zero (to request hardware acceleration autodetection).
LEDs that are known not to exist in a given ThinkPad model are not
made available through the sysfs interface. If you have a dock and you
notice there are LEDs listed for your ThinkPad that do not exist (and
are not in the dock), or if you notice that there are missing LEDs,
a report to ibm-acpi-devel@lists.sourceforge.net is appreciated.
ACPI sounds -- /proc/acpi/ibm/beep
----------------------------------
@ -1156,17 +1169,19 @@ may not be distinct. Later Lenovo models that implement the ACPI
display backlight brightness control methods have 16 levels, ranging
from 0 to 15.
There are two interfaces to the firmware for direct brightness control,
EC and UCMS (or CMOS). To select which one should be used, use the
brightness_mode module parameter: brightness_mode=1 selects EC mode,
brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
mode with NVRAM backing (so that brightness changes are remembered
across shutdown/reboot).
For IBM ThinkPads, there are two interfaces to the firmware for direct
brightness control, EC and UCMS (or CMOS). To select which one should be
used, use the brightness_mode module parameter: brightness_mode=1 selects
EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
mode with NVRAM backing (so that brightness changes are remembered across
shutdown/reboot).
The driver tries to select which interface to use from a table of
defaults for each ThinkPad model. If it makes a wrong choice, please
report this as a bug, so that we can fix it.
Lenovo ThinkPads only support brightness_mode=2 (UCMS).
When display backlight brightness controls are available through the
standard ACPI interface, it is best to use it instead of this direct
ThinkPad-specific interface. The driver will disable its native
@ -1254,7 +1269,7 @@ Fan control and monitoring: fan speed, fan enable/disable
procfs: /proc/acpi/ibm/fan
sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
pwm1_enable
pwm1_enable, fan2_input
sysfs hwmon driver attributes: fan_watchdog
NOTE NOTE NOTE: fan control operations are disabled by default for
@ -1267,6 +1282,9 @@ from the hardware registers of the embedded controller. This is known
to work on later R, T, X and Z series ThinkPads but may show a bogus
value on other models.
Some Lenovo ThinkPads support a secondary fan. This fan cannot be
controlled separately, it shares the main fan control.
Fan levels:
Most ThinkPad fans work in "levels" at the firmware interface. Level 0
@ -1397,6 +1415,11 @@ hwmon device attribute fan1_input:
which can take up to two minutes. May return rubbish on older
ThinkPads.
hwmon device attribute fan2_input:
Fan tachometer reading, in RPM, for the secondary fan.
Available only on some ThinkPads. If the secondary fan is
not installed, will always read 0.
hwmon driver attribute fan_watchdog:
Fan safety watchdog timer interval, in seconds. Minimum is
1 second, maximum is 120 seconds. 0 disables the watchdog.
@ -1555,3 +1578,7 @@ Sysfs interface changelog:
0x020300: hotkey enable/disable support removed, attributes
hotkey_bios_enabled and hotkey_enable deprecated and
marked for removal.
0x020400: Marker for 16 LEDs support. Also, LEDs that are known
to not exist in a given model are not registered with
the LED sysfs class anymore.

50
Documentation/leds-lp3944.txt 100644
View File

@ -0,0 +1,50 @@
Kernel driver lp3944
====================
* National Semiconductor LP3944 Fun-light Chip
Prefix: 'lp3944'
Addresses scanned: None (see the Notes section below)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LP/LP3944.html
Authors:
Antonio Ospite <ospite@studenti.unina.it>
Description
-----------
The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
DIM modes; it could even be used as a gpio expander but this driver assumes it
is used as a led controller.
The DIM modes are used to set _blink_ patterns for leds, the pattern is
specified supplying two parameters:
- period: from 0s to 1.6s
- duty cycle: percentage of the period the led is on, from 0 to 100
Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
See the datasheet for details.
LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
leds, the camera flash light and the lcds power.
Notes
-----
The chip is used mainly in embedded contexts, so this driver expects it is
registered using the i2c_board_info mechanism.
To register the chip at address 0x60 on adapter 0, set the platform data
according to include/linux/leds-lp3944.h, set the i2c board info:
static struct i2c_board_info __initdata a910_i2c_board_info[] = {
{
I2C_BOARD_INFO("lp3944", 0x60),
.platform_data = &a910_lp3944_leds,
},
};
and register it in the platform init function
i2c_register_board_info(0, a910_i2c_board_info,
ARRAY_SIZE(a910_i2c_board_info));

1168
Documentation/powerpc/booting-without-of.txt
View File

File diff suppressed because it is too large Load Diff

148
Documentation/powerpc/dts-bindings/4xx/emac.txt 100644
View File

@ -0,0 +1,148 @@
4xx/Axon EMAC ethernet nodes
The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
the Axon bridge. To operate this needs to interact with a ths
special McMAL DMA controller, and sometimes an RGMII or ZMII
interface. In addition to the nodes and properties described
below, the node for the OPB bus on which the EMAC sits must have a
correct clock-frequency property.
i) The EMAC node itself
Required properties:
- device_type : "network"
- compatible : compatible list, contains 2 entries, first is
"ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
405gp, Axon) and second is either "ibm,emac" or
"ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
"ibm,emac4"
- interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- interrupt-parent : optional, if needed for interrupt mapping
- reg : <registers mapping>
- local-mac-address : 6 bytes, MAC address
- mal-device : phandle of the associated McMAL node
- mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
with this EMAC
- mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
with this EMAC
- cell-index : 1 cell, hardware index of the EMAC cell on a given
ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
each Axon chip)
- max-frame-size : 1 cell, maximum frame size supported in bytes
- rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
operations.
For Axon, 2048
- tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
operations.
For Axon, 2048.
- fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
thresholds).
For Axon, 0x00000010
- mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
in bytes.
For Axon, 0x00000100 (I think ...)
- phy-mode : string, mode of operations of the PHY interface.
Supported values are: "mii", "rmii", "smii", "rgmii",
"tbi", "gmii", rtbi", "sgmii".
For Axon on CAB, it is "rgmii"
- mdio-device : 1 cell, required iff using shared MDIO registers
(440EP). phandle of the EMAC to use to drive the
MDIO lines for the PHY used by this EMAC.
- zmii-device : 1 cell, required iff connected to a ZMII. phandle of
the ZMII device node
- zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
channel or 0xffffffff if ZMII is only used for MDIO.
- rgmii-device : 1 cell, required iff connected to an RGMII. phandle
of the RGMII device node.
For Axon: phandle of plb5/plb4/opb/rgmii
- rgmii-channel : 1 cell, required iff connected to an RGMII. Which
RGMII channel is used by this EMAC.
Fox Axon: present, whatever value is appropriate for each
EMAC, that is the content of the current (bogus) "phy-port"
property.
Optional properties:
- phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
a search is performed.
- phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
for, used if phy-address is absent. bit 0x00000001 is
MDIO address 0.
For Axon it can be absent, though my current driver
doesn't handle phy-address yet so for now, keep
0x00ffffff in it.
- rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
operations (if absent the value is the same as
rx-fifo-size). For Axon, either absent or 2048.
- tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
operations (if absent the value is the same as
tx-fifo-size). For Axon, either absent or 2048.
- tah-device : 1 cell, optional. If connected to a TAH engine for
offload, phandle of the TAH device node.
- tah-channel : 1 cell, optional. If appropriate, channel used on the
TAH engine.
Example:
EMAC0: ethernet@40000800 {
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
interrupts = <1c 4 1d 4>;
reg = <40000800 70>;
local-mac-address = [00 04 AC E3 1B 1E];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <5dc>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rmii";
phy-map = <00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
ii) McMAL node
Required properties:
- device_type : "dma-controller"
- compatible : compatible list, containing 2 entries, first is
"ibm,mcmal-CHIP" where CHIP is the host ASIC (like
emac) and the second is either "ibm,mcmal" or
"ibm,mcmal2".
For Axon, "ibm,mcmal-axon","ibm,mcmal2"
- interrupts : <interrupt mapping for the MAL interrupts sources:
5 sources: tx_eob, rx_eob, serr, txde, rxde>.
For Axon: This is _different_ from the current
firmware. We use the "delayed" interrupts for txeob
and rxeob. Thus we end up with mapping those 5 MPIC
interrupts, all level positive sensitive: 10, 11, 32,
33, 34 (in decimal)
- dcr-reg : < DCR registers range >
- dcr-parent : if needed for dcr-reg
- num-tx-chans : 1 cell, number of Tx channels
- num-rx-chans : 1 cell, number of Rx channels
iii) ZMII node
Required properties:
- compatible : compatible list, containing 2 entries, first is
"ibm,zmii-CHIP" where CHIP is the host ASIC (like
EMAC) and the second is "ibm,zmii".
For Axon, there is no ZMII node.
- reg : <registers mapping>
iv) RGMII node
Required properties:
- compatible : compatible list, containing 2 entries, first is
"ibm,rgmii-CHIP" where CHIP is the host ASIC (like
EMAC) and the second is "ibm,rgmii".
For Axon, "ibm,rgmii-axon","ibm,rgmii"
- reg : <registers mapping>
- revision : as provided by the RGMII new version register if
available.
For Axon: 0x0000012a

2
Documentation/powerpc/dts-bindings/fsl/esdhc.txt
View File

@ -10,6 +10,8 @@ Required properties:
- interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
- sdhci,1-bit-only : (optional) specifies that a controller can
only handle 1-bit data transfers.
Example:

50
Documentation/powerpc/dts-bindings/gpio/gpio.txt 100644
View File

@ -0,0 +1,50 @@
Specifying GPIO information for devices
============================================
1) gpios property
-----------------
Nodes that makes use of GPIOs should define them using `gpios' property,
format of which is: <&gpio-controller1-phandle gpio1-specifier
&gpio-controller2-phandle gpio2-specifier
0 /* holes are permitted, means no GPIO 3 */
&gpio-controller4-phandle gpio4-specifier
...>;
Note that gpio-specifier length is controller dependent.
gpio-specifier may encode: bank, pin position inside the bank,
whether pin is open-drain and whether pin is logically inverted.
Example of the node using GPIOs:
node {
gpios = <&qe_pio_e 18 0>;
};
In this example gpio-specifier is "18 0" and encodes GPIO pin number,
and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
2) gpio-controller nodes
------------------------
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
Example of two SOC GPIO banks defined as gpio-controller nodes:
qe_pio_a: gpio-controller@1400 {
#gpio-cells = <2>;
compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
reg = <0x1400 0x18>;
gpio-controller;
};
qe_pio_e: gpio-controller@1460 {
#gpio-cells = <2>;
compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
reg = <0x1460 0x18>;
gpio-controller;
};

17
Documentation/powerpc/dts-bindings/gpio/led.txt
View File

@ -16,10 +16,17 @@ LED sub-node properties:
string defining the trigger assigned to the LED. Current triggers are:
"backlight" - LED will act as a back-light, controlled by the framebuffer
system
"default-on" - LED will turn on
"default-on" - LED will turn on, but see "default-state" below
"heartbeat" - LED "double" flashes at a load average based rate
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
- default-state: (optional) The initial state of the LED. Valid
values are "on", "off", and "keep". If the LED is already on or off
and the default-state property is set the to same value, then no
glitch should be produced where the LED momentarily turns off (or
on). The "keep" setting will keep the LED at whatever its current
state is, without producing a glitch. The default is off if this
property is not present.
Examples:
@ -30,14 +37,22 @@ leds {
gpios = <&mcu_pio 0 1>; /* Active low */
linux,default-trigger = "ide-disk";
};
fault {
gpios = <&mcu_pio 1 0>;
/* Keep LED on if BIOS detected hardware fault */
default-state = "keep";
};
};
run-control {
compatible = "gpio-leds";
red {
gpios = <&mpc8572 6 0>;
default-state = "off";
};
green {
gpios = <&mpc8572 7 0>;
default-state = "on";
};
}

19
Documentation/powerpc/dts-bindings/gpio/mdio.txt 100644
View File

@ -0,0 +1,19 @@
MDIO on GPIOs
Currently defined compatibles:
- virtual,gpio-mdio
MDC and MDIO lines connected to GPIO controllers are listed in the
gpios property as described in section VIII.1 in the following order:
MDC, MDIO.
Example:
mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qe_pio_a 11
&qe_pio_c 6>;
};

521
Documentation/powerpc/dts-bindings/marvell.txt 100644
View File

@ -0,0 +1,521 @@
Marvell Discovery mv64[345]6x System Controller chips
===========================================================
The Marvell mv64[345]60 series of system controller chips contain
many of the peripherals needed to implement a complete computer
system. In this section, we define device tree nodes to describe
the system controller chip itself and each of the peripherals
which it contains. Compatible string values for each node are
prefixed with the string "marvell,", for Marvell Technology Group Ltd.
1) The /system-controller node
This node is used to represent the system-controller and must be
present when the system uses a system controller chip. The top-level
system-controller node contains information that is global to all
devices within the system controller chip. The node name begins
with "system-controller" followed by the unit address, which is
the base address of the memory-mapped register set for the system
controller chip.
Required properties:
- ranges : Describes the translation of system controller addresses
for memory mapped registers.
- clock-frequency: Contains the main clock frequency for the system
controller chip.
- reg : This property defines the address and size of the
memory-mapped registers contained within the system controller
chip. The address specified in the "reg" property should match
the unit address of the system-controller node.
- #address-cells : Address representation for system controller
devices. This field represents the number of cells needed to
represent the address of the memory-mapped registers of devices
within the system controller chip.
- #size-cells : Size representation for for the memory-mapped
registers within the system controller chip.
- #interrupt-cells : Defines the width of cells used to represent
interrupts.
Optional properties:
- model : The specific model of the system controller chip. Such
as, "mv64360", "mv64460", or "mv64560".
- compatible : A string identifying the compatibility identifiers
of the system controller chip.
The system-controller node contains child nodes for each system
controller device that the platform uses. Nodes should not be created
for devices which exist on the system controller chip but are not used
Example Marvell Discovery mv64360 system-controller node:
system-controller@f1000000 { /* Marvell Discovery mv64360 */
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
compatible = "marvell,mv64360";
clock-frequency = <133333333>;
reg = <0xf1000000 0x10000>;
virtual-reg = <0xf1000000>;
ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
0xa0000000 0xa0000000 0x4000000 /* User FLASH */
0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
[ child node definitions... ]
}
2) Child nodes of /system-controller
a) Marvell Discovery MDIO bus
The MDIO is a bus to which the PHY devices are connected. For each
device that exists on this bus, a child node should be created. See
the definition of the PHY node below for an example of how to define
a PHY.
Required properties:
- #address-cells : Should be <1>
- #size-cells : Should be <0>
- device_type : Should be "mdio"
- compatible : Should be "marvell,mv64360-mdio"
Example:
mdio {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "marvell,mv64360-mdio";
ethernet-phy@0 {
......
};
};
b) Marvell Discovery ethernet controller
The Discover ethernet controller is described with two levels
of nodes. The first level describes an ethernet silicon block
and the second level describes up to 3 ethernet nodes within
that block. The reason for the multiple levels is that the
registers for the node are interleaved within a single set
of registers. The "ethernet-block" level describes the
shared register set, and the "ethernet" nodes describe ethernet
port-specific properties.
Ethernet block node
Required properties:
- #address-cells : <1>
- #size-cells : <0>
- compatible : "marvell,mv64360-eth-block"
- reg : Offset and length of the register set for this block
Example Discovery Ethernet block node:
ethernet-block@2000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,mv64360-eth-block";
reg = <0x2000 0x2000>;
ethernet@0 {
.......
};
};
Ethernet port node
Required properties:
- device_type : Should be "network".
- compatible : Should be "marvell,mv64360-eth".
- reg : Should be <0>, <1>, or <2>, according to which registers
within the silicon block the device uses.
- interrupts : <a> where a is the interrupt number for the port.
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
- phy : the phandle for the PHY connected to this ethernet
controller.
- local-mac-address : 6 bytes, MAC address
Example Discovery Ethernet port node:
ethernet@0 {
device_type = "network";
compatible = "marvell,mv64360-eth";
reg = <0>;
interrupts = <32>;
interrupt-parent = <&PIC>;
phy = <&PHY0>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
c) Marvell Discovery PHY nodes
Required properties:
- device_type : Should be "ethernet-phy"
- interrupts : <a> where a is the interrupt number for this phy.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
Example Discovery PHY node:
ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <1>;
};
d) Marvell Discovery SDMA nodes
Represent DMA hardware associated with the MPSC (multiprotocol
serial controllers).
Required properties:
- compatible : "marvell,mv64360-sdma"
- reg : Offset and length of the register set for this device
- interrupts : <a> where a is the interrupt number for the DMA
device.
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery SDMA node:
sdma@4000 {
compatible = "marvell,mv64360-sdma";
reg = <0x4000 0xc18>;
virtual-reg = <0xf1004000>;
interrupts = <36>;
interrupt-parent = <&PIC>;
};
e) Marvell Discovery BRG nodes
Represent baud rate generator hardware associated with the MPSC
(multiprotocol serial controllers).
Required properties:
- compatible : "marvell,mv64360-brg"
- reg : Offset and length of the register set for this device
- clock-src : A value from 0 to 15 which selects the clock
source for the baud rate generator. This value corresponds
to the CLKS value in the BRGx configuration register. See
the mv64x60 User's Manual.
- clock-frequence : The frequency (in Hz) of the baud rate
generator's input clock.
- current-speed : The current speed setting (presumably by
firmware) of the baud rate generator.
Example Discovery BRG node:
brg@b200 {
compatible = "marvell,mv64360-brg";
reg = <0xb200 0x8>;
clock-src = <8>;
clock-frequency = <133333333>;
current-speed = <9600>;
};
f) Marvell Discovery CUNIT nodes
Represent the Serial Communications Unit device hardware.
Required properties:
- reg : Offset and length of the register set for this device
Example Discovery CUNIT node:
cunit@f200 {
reg = <0xf200 0x200>;
};
g) Marvell Discovery MPSCROUTING nodes
Represent the Discovery's MPSC routing hardware
Required properties:
- reg : Offset and length of the register set for this device
Example Discovery CUNIT node:
mpscrouting@b500 {
reg = <0xb400 0xc>;
};
h) Marvell Discovery MPSCINTR nodes
Represent the Discovery's MPSC DMA interrupt hardware registers
(SDMA cause and mask registers).
Required properties:
- reg : Offset and length of the register set for this device
Example Discovery MPSCINTR node:
mpsintr@b800 {
reg = <0xb800 0x100>;
};
i) Marvell Discovery MPSC nodes
Represent the Discovery's MPSC (Multiprotocol Serial Controller)
serial port.
Required properties:
- device_type : "serial"
- compatible : "marvell,mv64360-mpsc"
- reg : Offset and length of the register set for this device
- sdma : the phandle for the SDMA node used by this port
- brg : the phandle for the BRG node used by this port
- cunit : the phandle for the CUNIT node used by this port
- mpscrouting : the phandle for the MPSCROUTING node used by this port
- mpscintr : the phandle for the MPSCINTR node used by this port
- cell-index : the hardware index of this cell in the MPSC core
- max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
register
- interrupts : <a> where a is the interrupt number for the MPSC.
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery MPSCINTR node:
mpsc@8000 {
device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xf1008000>;
sdma = <&SDMA0>;
brg = <&BRG0>;
cunit = <&CUNIT>;
mpscrouting = <&MPSCROUTING>;
mpscintr = <&MPSCINTR>;
cell-index = <0>;
max_idle = <40>;
interrupts = <40>;
interrupt-parent = <&PIC>;
};
j) Marvell Discovery Watch Dog Timer nodes
Represent the Discovery's watchdog timer hardware
Required properties:
- compatible : "marvell,mv64360-wdt"
- reg : Offset and length of the register set for this device
Example Discovery Watch Dog Timer node:
wdt@b410 {
compatible = "marvell,mv64360-wdt";
reg = <0xb410 0x8>;
};
k) Marvell Discovery I2C nodes
Represent the Discovery's I2C hardware
Required properties:
- device_type : "i2c"
- compatible : "marvell,mv64360-i2c"
- reg : Offset and length of the register set for this device
- interrupts : <a> where a is the interrupt number for the I2C.
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery I2C node:
compatible = "marvell,mv64360-i2c";
reg = <0xc000 0x20>;
virtual-reg = <0xf100c000>;
interrupts = <37>;
interrupt-parent = <&PIC>;
};
l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
Represent the Discovery's PIC hardware
Required properties:
- #interrupt-cells : <1>
- #address-cells : <0>
- compatible : "marvell,mv64360-pic"
- reg : Offset and length of the register set for this device
- interrupt-controller
Example Discovery PIC node:
pic {
#interrupt-cells = <1>;
#address-cells = <0>;
compatible = "marvell,mv64360-pic";
reg = <0x0 0x88>;
interrupt-controller;
};
m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
Represent the Discovery's MPP hardware
Required properties:
- compatible : "marvell,mv64360-mpp"
- reg : Offset and length of the register set for this device
Example Discovery MPP node:
mpp@f000 {
compatible = "marvell,mv64360-mpp";
reg = <0xf000 0x10>;
};
n) Marvell Discovery GPP (General Purpose Pins) nodes
Represent the Discovery's GPP hardware
Required properties:
- compatible : "marvell,mv64360-gpp"
- reg : Offset and length of the register set for this device
Example Discovery GPP node:
gpp@f000 {
compatible = "marvell,mv64360-gpp";
reg = <0xf100 0x20>;
};
o) Marvell Discovery PCI host bridge node
Represents the Discovery's PCI host bridge device. The properties
for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
1275-1994. A typical value for the compatible property is
"marvell,mv64360-pci".
Example Discovery PCI host bridge node
pci@80000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "marvell,mv64360-pci";
reg = <0xcf8 0x8>;
ranges = <0x01000000 0x0 0x0
0x88000000 0x0 0x01000000
0x02000000 0x0 0x80000000
0x80000000 0x0 0x08000000>;
bus-range = <0 255>;
clock-frequency = <66000000>;
interrupt-parent = <&PIC>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0a */
0x5000 0 0 1 &PIC 80
0x5000 0 0 2 &PIC 81
0x5000 0 0 3 &PIC 91
0x5000 0 0 4 &PIC 93
/* IDSEL 0x0b */
0x5800 0 0 1 &PIC 91
0x5800 0 0 2 &PIC 93
0x5800 0 0 3 &PIC 80
0x5800 0 0 4 &PIC 81
/* IDSEL 0x0c */
0x6000 0 0 1 &PIC 91
0x6000 0 0 2 &PIC 93
0x6000 0 0 3 &PIC 80
0x6000 0 0 4 &PIC 81
/* IDSEL 0x0d */
0x6800 0 0 1 &PIC 93
0x6800 0 0 2 &PIC 80
0x6800 0 0 3 &PIC 81
0x6800 0 0 4 &PIC 91
>;
};
p) Marvell Discovery CPU Error nodes
Represent the Discovery's CPU error handler device.
Required properties:
- compatible : "marvell,mv64360-cpu-error"
- reg : Offset and length of the register set for this device
- interrupts : the interrupt number for this device
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery CPU Error node:
cpu-error@0070 {
compatible = "marvell,mv64360-cpu-error";
reg = <0x70 0x10 0x128 0x28>;
interrupts = <3>;
interrupt-parent = <&PIC>;
};
q) Marvell Discovery SRAM Controller nodes
Represent the Discovery's SRAM controller device.
Required properties:
- compatible : "marvell,mv64360-sram-ctrl"
- reg : Offset and length of the register set for this device
- interrupts : the interrupt number for this device
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery SRAM Controller node:
sram-ctrl@0380 {
compatible = "marvell,mv64360-sram-ctrl";
reg = <0x380 0x80>;
interrupts = <13>;
interrupt-parent = <&PIC>;
};
r) Marvell Discovery PCI Error Handler nodes
Represent the Discovery's PCI error handler device.
Required properties:
- compatible : "marvell,mv64360-pci-error"
- reg : Offset and length of the register set for this device
- interrupts : the interrupt number for this device
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery PCI Error Handler node:
pci-error@1d40 {
compatible = "marvell,mv64360-pci-error";
reg = <0x1d40 0x40 0xc28 0x4>;
interrupts = <12>;
interrupt-parent = <&PIC>;
};
s) Marvell Discovery Memory Controller nodes
Represent the Discovery's memory controller device.
Required properties:
- compatible : "marvell,mv64360-mem-ctrl"
- reg : Offset and length of the register set for this device
- interrupts : the interrupt number for this device
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery Memory Controller node:
mem-ctrl@1400 {
compatible = "marvell,mv64360-mem-ctrl";
reg = <0x1400 0x60>;
interrupts = <17>;
interrupt-parent = <&PIC>;
};

25
Documentation/powerpc/dts-bindings/phy.txt 100644
View File

@ -0,0 +1,25 @@
PHY nodes
Required properties:
- device_type : Should be "ethernet-phy"
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
- linux,phandle : phandle for this node; likely referenced by an
ethernet controller node.
Example:
ethernet-phy@0 {
linux,phandle = <2452000>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};

57
Documentation/powerpc/dts-bindings/spi-bus.txt 100644
View File

@ -0,0 +1,57 @@
SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this
discussion, it is assumed that the system's SPI controller is in
SPI master mode. This binding does not describe SPI controllers
in slave mode.
The SPI master node requires the following properties:
- #address-cells - number of cells required to define a chip select
address on the SPI bus.
- #size-cells - should be zero.
- compatible - name of SPI bus controller following generic names
recommended practice.
No other properties are required in the SPI bus node. It is assumed
that a driver for an SPI bus device will understand that it is an SPI bus.
However, the binding does not attempt to define the specific method for
assigning chip select numbers. Since SPI chip select configuration is
flexible and non-standardized, it is left out of this binding with the
assumption that board specific platform code will be used to manage
chip selects. Individual drivers can define additional properties to
support describing the chip select layout.
SPI slave nodes must be children of the SPI master node and can
contain the following properties.
- reg - (required) chip select address of device.
- compatible - (required) name of SPI device following generic names
recommended practice
- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
- spi-cpol - (optional) Empty property indicating device requires
inverse clock polarity (CPOL) mode
- spi-cpha - (optional) Empty property indicating device requires
shifted clock phase (CPHA) mode
- spi-cs-high - (optional) Empty property indicating device requires
chip select active high
SPI example for an MPC5200 SPI bus:
spi@f00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
ethernet-switch@0 {
compatible = "micrel,ks8995m";
spi-max-frequency = <1000000>;
reg = <0>;
};
codec@1 {
compatible = "ti,tlv320aic26";
spi-max-frequency = <100000>;
reg = <1>;
};
};

25
Documentation/powerpc/dts-bindings/usb-ehci.txt 100644
View File

@ -0,0 +1,25 @@
USB EHCI controllers
Required properties:
- compatible : should be "usb-ehci".
- reg : should contain at least address and length of the standard EHCI
register set for the device. Optional platform-dependent registers
(debug-port or other) can be also specified here, but only after
definition of standard EHCI registers.
- interrupts : one EHCI interrupt should be described here.
If device registers are implemented in big endian mode, the device
node should have "big-endian-regs" property.
If controller implementation operates with big endian descriptors,
"big-endian-desc" property should be specified.
If both big endian registers and descriptors are used by the controller
implementation, "big-endian" property can be specified instead of having
both "big-endian-regs" and "big-endian-desc".
Example (Sequoia 440EPx):
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
interrupts = <1a 4>;
reg = <0 e0000300 90 0 e0000390 70>;
big-endian;
};

295
Documentation/powerpc/dts-bindings/xilinx.txt 100644
View File

@ -0,0 +1,295 @@
d) Xilinx IP cores
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
of standard device types (network, serial, etc.) and miscellaneous
devices (gpio, LCD, spi, etc). Also, since these devices are
implemented within the fpga fabric every instance of the device can be
synthesised with different options that change the behaviour.
Each IP-core has a set of parameters which the FPGA designer can use to
control how the core is synthesized. Historically, the EDK tool would
extract the device parameters relevant to device drivers and copy them
into an 'xparameters.h' in the form of #define symbols. This tells the
device drivers how the IP cores are configured, but it requres the kernel
to be recompiled every time the FPGA bitstream is resynthesized.
The new approach is to export the parameters into the device tree and
generate a new device tree each time the FPGA bitstream changes. The
parameters which used to be exported as #defines will now become
properties of the device node. In general, device nodes for IP-cores
will take the following form:
(name): (generic-name)@(base-address) {
compatible = "xlnx,(ip-core-name)-(HW_VER)"
[, (list of compatible devices), ...];
reg = <(baseaddr) (size)>;
interrupt-parent = <&interrupt-controller-phandle>;
interrupts = < ... >;
xlnx,(parameter1) = "(string-value)";
xlnx,(parameter2) = <(int-value)>;
};
(generic-name): an open firmware-style name that describes the
generic class of device. Preferably, this is one word, such
as 'serial' or 'ethernet'.
(ip-core-name): the name of the ip block (given after the BEGIN
directive in system.mhs). Should be in lowercase
and all underscores '_' converted to dashes '-'.
(name): is derived from the "PARAMETER INSTANCE" value.
(parameter#): C_* parameters from system.mhs. The C_ prefix is
dropped from the parameter name, the name is converted
to lowercase and all underscore '_' characters are
converted to dashes '-'.
(baseaddr): the baseaddr parameter value (often named C_BASEADDR).
(HW_VER): from the HW_VER parameter.
(size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
Typically, the compatible list will include the exact IP core version
followed by an older IP core version which implements the same
interface or any other device with the same interface.
'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
For example, the following block from system.mhs:
BEGIN opb_uartlite
PARAMETER INSTANCE = opb_uartlite_0
PARAMETER HW_VER = 1.00.b
PARAMETER C_BAUDRATE = 115200
PARAMETER C_DATA_BITS = 8
PARAMETER C_ODD_PARITY = 0
PARAMETER C_USE_PARITY = 0
PARAMETER C_CLK_FREQ = 50000000
PARAMETER C_BASEADDR = 0xEC100000
PARAMETER C_HIGHADDR = 0xEC10FFFF
BUS_INTERFACE SOPB = opb_7
PORT OPB_Clk = CLK_50MHz
PORT Interrupt = opb_uartlite_0_Interrupt
PORT RX = opb_uartlite_0_RX
PORT TX = opb_uartlite_0_TX
PORT OPB_Rst = sys_bus_reset_0
END
becomes the following device tree node:
opb_uartlite_0: serial@ec100000 {
device_type = "serial";
compatible = "xlnx,opb-uartlite-1.00.b";
reg = <ec100000 10000>;
interrupt-parent = <&opb_intc_0>;
interrupts = <1 0>; // got this from the opb_intc parameters
current-speed = <d#115200>; // standard serial device prop
clock-frequency = <d#50000000>; // standard serial device prop
xlnx,data-bits = <8>;
xlnx,odd-parity = <0>;
xlnx,use-parity = <0>;
};
Some IP cores actually implement 2 or more logical devices. In
this case, the device should still describe the whole IP core with
a single node and add a child node for each logical device. The
ranges property can be used to translate from parent IP-core to the
registers of each device. In addition, the parent node should be
compatible with the bus type 'xlnx,compound', and should contain
#address-cells and #size-cells, as with any other bus. (Note: this
makes the assumption that both logical devices have the same bus
binding. If this is not true, then separate nodes should be used
for each logical device). The 'cell-index' property can be used to
enumerate logical devices within an IP core. For example, the
following is the system.mhs entry for the dual ps2 controller found
on the ml403 reference design.
BEGIN opb_ps2_dual_ref
PARAMETER INSTANCE = opb_ps2_dual_ref_0
PARAMETER HW_VER = 1.00.a
PARAMETER C_BASEADDR = 0xA9000000
PARAMETER C_HIGHADDR = 0xA9001FFF
BUS_INTERFACE SOPB = opb_v20_0
PORT Sys_Intr1 = ps2_1_intr
PORT Sys_Intr2 = ps2_2_intr
PORT Clkin1 = ps2_clk_rx_1
PORT Clkin2 = ps2_clk_rx_2
PORT Clkpd1 = ps2_clk_tx_1
PORT Clkpd2 = ps2_clk_tx_2
PORT Rx1 = ps2_d_rx_1
PORT Rx2 = ps2_d_rx_2
PORT Txpd1 = ps2_d_tx_1
PORT Txpd2 = ps2_d_tx_2
END
It would result in the following device tree nodes:
opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,compound";
ranges = <0 a9000000 2000>;
// If this device had extra parameters, then they would
// go here.
ps2@0 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <0 40>;
interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
ps2@1000 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <1000 40>;
interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
};
Also, the system.mhs file defines bus attachments from the processor
to the devices. The device tree structure should reflect the bus
attachments. Again an example; this system.mhs fragment:
BEGIN ppc405_virtex4
PARAMETER INSTANCE = ppc405_0
PARAMETER HW_VER = 1.01.a
BUS_INTERFACE DPLB = plb_v34_0
BUS_INTERFACE IPLB = plb_v34_0
END
BEGIN opb_intc
PARAMETER INSTANCE = opb_intc_0
PARAMETER HW_VER = 1.00.c
PARAMETER C_BASEADDR = 0xD1000FC0
PARAMETER C_HIGHADDR = 0xD1000FDF
BUS_INTERFACE SOPB = opb_v20_0
END
BEGIN opb_uart16550
PARAMETER INSTANCE = opb_uart16550_0
PARAMETER HW_VER = 1.00.d
PARAMETER C_BASEADDR = 0xa0000000
PARAMETER C_HIGHADDR = 0xa0001FFF
BUS_INTERFACE SOPB = opb_v20_0
END
BEGIN plb_v34
PARAMETER INSTANCE = plb_v34_0
PARAMETER HW_VER = 1.02.a
END
BEGIN plb_bram_if_cntlr
PARAMETER INSTANCE = plb_bram_if_cntlr_0
PARAMETER HW_VER = 1.00.b
PARAMETER C_BASEADDR = 0xFFFF0000
PARAMETER C_HIGHADDR = 0xFFFFFFFF
BUS_INTERFACE SPLB = plb_v34_0
END
BEGIN plb2opb_bridge
PARAMETER INSTANCE = plb2opb_bridge_0
PARAMETER HW_VER = 1.01.a
PARAMETER C_RNG0_BASEADDR = 0x20000000
PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
PARAMETER C_RNG1_BASEADDR = 0x60000000
PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
PARAMETER C_RNG2_BASEADDR = 0x80000000
PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
PARAMETER C_RNG3_BASEADDR = 0xC0000000
PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
BUS_INTERFACE SPLB = plb_v34_0
BUS_INTERFACE MOPB = opb_v20_0
END
Gives this device tree (some properties removed for clarity):
plb@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,plb-v34-1.02.a";
device_type = "ibm,plb";
ranges; // 1:1 translation
plb_bram_if_cntrl_0: bram@ffff0000 {
reg = <ffff0000 10000>;
}
opb@20000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <20000000 20000000 20000000
60000000 60000000 20000000
80000000 80000000 40000000
c0000000 c0000000 20000000>;
opb_uart16550_0: serial@a0000000 {
reg = <a00000000 2000>;
};
opb_intc_0: interrupt-controller@d1000fc0 {
reg = <d1000fc0 20>;
};
};
};
That covers the general approach to binding xilinx IP cores into the
device tree. The following are bindings for specific devices:
i) Xilinx ML300 Framebuffer
Simple framebuffer device from the ML300 reference design (also on the
ML403 reference design as well as others).
Optional properties:
- resolution = <xres yres> : pixel resolution of framebuffer. Some
implementations use a different resolution.
Default is <d#640 d#480>
- virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
Default is <d#1024 d#480>.
- rotate-display (empty) : rotate display 180 degrees.
ii) Xilinx SystemACE
The Xilinx SystemACE device is used to program FPGAs from an FPGA
bitstream stored on a CF card. It can also be used as a generic CF
interface device.
Optional properties:
- 8-bit (empty) : Set this property for SystemACE in 8 bit mode
iii) Xilinx EMAC and Xilinx TEMAC
Xilinx Ethernet devices. In addition to general xilinx properties
listed above, nodes for these devices should include a phy-handle
property, and may include other common network device properties
like local-mac-address.
iv) Xilinx Uartlite
Xilinx uartlite devices are simple fixed speed serial ports.
Required properties:
- current-speed : Baud rate of uartlite
v) Xilinx hwicap
Xilinx hwicap devices provide access to the configuration logic
of the FPGA through the Internal Configuration Access Port
(ICAP). The ICAP enables partial reconfiguration of the FPGA,
readback of the configuration information, and some control over
'warm boots' of the FPGA fabric.
Required properties:
- xlnx,family : The family of the FPGA, necessary since the
capabilities of the underlying ICAP hardware
differ between different families. May be
'virtex2p', 'virtex4', or 'virtex5'.
vi) Xilinx Uart 16550
Xilinx UART 16550 devices are very similar to the NS16550 but with
different register spacing and an offset from the base address.
Required properties:
- clock-frequency : Frequency of the clock input
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required

2
Documentation/rfkill.txt
View File

@ -111,6 +111,8 @@ following attributes:
name: Name assigned by driver to this key (interface or driver name).
type: Driver type string ("wlan", "bluetooth", etc).
persistent: Whether the soft blocked state is initialised from
non-volatile storage at startup.
state: Current state of the transmitter
0: RFKILL_STATE_SOFT_BLOCKED
transmitter is turned off by software

2
Documentation/sound/alsa/HD-Audio-Models.txt
View File

@ -139,6 +139,7 @@ ALC883/888
acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
acer-aspire Acer Aspire 9810
acer-aspire-4930g Acer Aspire 4930G
acer-aspire-6530g Acer Aspire 6530G
acer-aspire-8930g Acer Aspire 8930G
medion Medion Laptops
medion-md2 Medion MD2
@ -239,6 +240,7 @@ AD1986A
laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
ultra 2-channel with EAPD (Samsung Ultra tablet PC)
samsung 2-channel with EAPD (Samsung R65)
samsung-p50 2-channel with HP-automute (Samsung P50)
AD1988/AD1988B/AD1989A/AD1989B
==============================

10
Documentation/spi/spidev_test.c
View File

@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[])
{ "lsb", 0, 0, 'L' },
{ "cs-high", 0, 0, 'C' },
{ "3wire", 0, 0, '3' },
{ "no-cs", 0, 0, 'N' },
{ "ready", 0, 0, 'R' },
{ NULL, 0, 0, 0 },
};
int c;
c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
if (c == -1)
break;
@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[])
case '3':
mode |= SPI_3WIRE;
break;
case 'N':
mode |= SPI_NO_CS;
break;
case 'R':
mode |= SPI_READY;
break;
default:
print_usage(argv[0]);
break;

6
Documentation/video4linux/CARDLIST.cx88
View File

@ -6,8 +6,8 @@
5 -> Leadtek Winfast 2000XP Expert [107d:6611,107d:6613]
6 -> AverTV Studio 303 (M126) [1461:000b]
7 -> MSI TV-@nywhere Master [1462:8606]
8 -> Leadtek Winfast DV2000 [107d:6620]
9 -> Leadtek PVR 2000 [107d:663b,107d:663c,107d:6632]
8 -> Leadtek Winfast DV2000 [107d:6620,107d:6621]
9 -> Leadtek PVR 2000 [107d:663b,107d:663c,107d:6632,107d:6630,107d:6638,107d:6631,107d:6637,107d:663d]
10 -> IODATA GV-VCP3/PCI [10fc:d003]
11 -> Prolink PlayTV PVR
12 -> ASUS PVR-416 [1043:4823,1461:c111]
@ -59,7 +59,7 @@
58 -> Pinnacle PCTV HD 800i [11bd:0051]
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788]
61 -> Winfast TV2000 XP Global [107d:6f18]
61 -> Leadtek TV2000 XP Global [107d:6f18,107d:6618]
62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]

1
Documentation/video4linux/CARDLIST.em28xx
View File

@ -65,3 +65,4 @@
67 -> Terratec Grabby (em2860) [0ccd:0096]
68 -> Terratec AV350 (em2860) [0ccd:0084]
69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313]
70 -> Evga inDtube (em2882)

24
Documentation/video4linux/v4l2-framework.txt
View File

@ -390,6 +390,30 @@ later date. It differs between i2c drivers and as such can be confusing.
To see which chip variants are supported you can look in the i2c driver code
for the i2c_device_id table. This lists all the possibilities.
There are two more helper functions:
v4l2_i2c_new_subdev_cfg: this function adds new irq and platform_data
arguments and has both 'addr' and 'probed_addrs' arguments: if addr is not
0 then that will be used (non-probing variant), otherwise the probed_addrs
are probed.
For example: this will probe for address 0x10:
struct v4l2_subdev *sd = v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter,
"module_foo", "chipid", 0, NULL, 0, I2C_ADDRS(0x10));
v4l2_i2c_new_subdev_board uses an i2c_board_info struct which is passed
to the i2c driver and replaces the irq, platform_data and addr arguments.
If the subdev supports the s_config core ops, then that op is called with
the irq and platform_data arguments after the subdev was setup. The older
v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with
irq set to 0 and platform_data set to NULL.
Note that in the next kernel release the functions v4l2_i2c_new_subdev,
v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be
replaced by a single v4l2_i2c_new_subdev that is identical to
v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments.
struct video_device
-------------------

19
Documentation/watchdog/hpwdt.txt
View File

@ -19,30 +19,41 @@ Last reviewed: 06/02/2009
not be updated in a timely fashion and a hardware system reset (also known as
an Automatic Server Recovery (ASR)) event will occur.
The hpwdt driver also has three (3) module parameters. They are the following:
The hpwdt driver also has four (4) module parameters. They are the following:
soft_margin - allows the user to set the watchdog timer value
allow_kdump - allows the user to save off a kernel dump image after an NMI
nowayout - basic watchdog parameter that does not allow the timer to
be restarted or an impending ASR to be escaped.
priority - determines whether or not the hpwdt driver is first on the
die_notify list to handle NMIs or last. The default value
for this module parameter is 0 or LAST. If the user wants to
enable NMI sourcing then reload the hpwdt driver with
priority=1 (and boot with nmi_watchdog=0).
NOTE: More information about watchdog drivers in general, including the ioctl
interface to /dev/watchdog can be found in
Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt.
The NMI sourcing capability is disabled when the driver discovers that the
nmi_watchdog is turned on (nmi_watchdog = 1). This is due to the inability to
The priority parameter was introduced due to other kernel software that relied
on handling NMIs (like oprofile). Keeping hpwdt's priority at 0 (or LAST)
enables the users of NMIs for non critical events to be work as expected.
The NMI sourcing capability is disabled by default due to the inability to
distinguish between "NMI Watchdog Ticks" and "HW generated NMI events" in the
Linux kernel. What this means is that the hpwdt nmi handler code is called
each time the NMI signal fires off. This could amount to several thousands of
NMIs in a matter of seconds. If a user sees the Linux kernel's "dazed and
confused" message in the logs or if the system gets into a hung state, then
the user should reboot with nmi_watchdog=0.
the hpwdt driver can be reloaded with the "priority" module parameter set
(priority=1).
1. If the kernel has not been booted with nmi_watchdog turned off then
edit /boot/grub/menu.lst and place the nmi_watchdog=0 at the end of the
currently booting kernel line.
2. reboot the sever
3. Once the system comes up perform a rmmod hpwdt
4. insmod /lib/modules/`uname -r`/kernel/drivers/char/watchdog/hpwdt.ko priority=1
Now, the hpwdt can successfully receive and source the NMI and provide a log
message that details the reason for the NMI (as determined by the HP BIOS).

138
MAINTAINERS
View File

@ -230,6 +230,13 @@ L: linux-acenic@sunsite.dk
S: Maintained
F: drivers/net/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
P: Peter Feuerer
M: peter@piie.net
W: http://piie.net/?section=acerhdf
S: Maintained
F: drivers/platform/x86/acerhdf.c
ACER WMI LAPTOP EXTRAS
P: Carlos Corbacho
M: carlos@strangeworlds.co.uk
@ -653,6 +660,8 @@ M: laforge@openezx.org
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
T: topgit git://git.openezx.org/openezx.git
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
P: Paulius Zaleckas
@ -774,11 +783,25 @@ P: Philipp Zabel
M: philipp.zabel@gmail.com
S: Maintained
ARM/MIOA701 MACHINE SUPPORT
P: Robert Jarzmik
M: robert.jarzmik@free.fr
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
F: arch/arm/mach-pxa/mioa701.c
S: Maintained
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
P: Michael Petchkovsky
M: mkpetch@internode.on.net
S: Maintained
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
P: Nelson Castillo
M: arhuaco@freaks-unidos.net
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
S: Supported
ARM/TOSA MACHINE SUPPORT
P: Dmitry Eremin-Solenikov
M: dbaryshkov@gmail.com
@ -792,6 +815,12 @@ M: marek.vasut@gmail.com
W: http://hackndev.com
S: Maintained
ARM/PALM TREO 680 SUPPORT
P: Tomas Cech
M: sleep_walker@suse.cz
W: http://hackndev.com
S: Maintained
ARM/PALMZ72 SUPPORT
P: Sergey Lapin
M: slapin@ossfans.org
@ -838,12 +867,22 @@ M: alex@shark-linux.de
W: http://www.shark-linux.de/shark.html
S: Maintained
ARM/SAMSUNG ARM ARCHITECTURES
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/plat-s3c/
F: arch/arm/plat-s3c24xx/
ARM/S3C2410 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2410/
ARM/S3C2440 ARM ARCHITECTURE
P: Ben Dooks
@ -851,6 +890,39 @@ M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2440/
ARM/S3C2442 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2442/
ARM/S3C2443 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2443/
ARM/S3C6400 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c6400/
ARM/S3C6410 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c6410/
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
P: Lennert Buytenhek
@ -891,8 +963,7 @@ M: corentincj@iksaif.net
P: Karol Kozimor
M: sziwan@users.sourceforge.net
L: acpi4asus-user@lists.sourceforge.net
W: http://sourceforge.net/projects/acpi4asus
W: http://xf.iksaif.net/acpi4asus
W: http://acpi4asus.sf.net
S: Maintained
F: arch/x86/kernel/acpi/boot.c
F: drivers/platform/x86/asus_acpi.c
@ -908,8 +979,7 @@ ASUS LAPTOP EXTRAS DRIVER
P: Corentin Chary
M: corentincj@iksaif.net
L: acpi4asus-user@lists.sourceforge.net
W: http://sourceforge.net/projects/acpi4asus
W: http://xf.iksaif.net/acpi4asus
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus-laptop.c
@ -1010,6 +1080,13 @@ W: http://www.at91.com/
S: Maintained
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER
P: Nicolas Ferre
M: nicolas.ferre@atmel.com
S: Maintained
F: drivers/mmc/host/atmel-mci.c
F: drivers/mmc/host/atmel-mci-regs.h
ATMEL AT91 / AT32 SERIAL DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
@ -1607,7 +1684,7 @@ P: Mikael Starvik
M: starvik@axis.com
P: Jesper Nilsson
M: jesper.nilsson@axis.com
L: dev-etrax@axis.com
L: linux-cris-kernel@axis.com
W: http://developer.axis.com
S: Maintained
F: arch/cris/
@ -2053,9 +2130,9 @@ F: drivers/edac/i5400_edac.c
EDAC-I82975X
P: Ranganathan Desikan
M: rdesikan@jetzbroadband.com
M: ravi@jetztechnologies.com
P: Arvind R.
M: arvind@acarlab.com
M: arvind@jetztechnologies.com
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
@ -2081,7 +2158,7 @@ EEEPC LAPTOP EXTRAS DRIVER
P: Corentin Chary
M: corentincj@iksaif.net
L: acpi4asus-user@lists.sourceforge.net
W: http://sourceforge.net/projects/acpi4asus
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/eeepc-laptop.c
@ -2453,6 +2530,14 @@ F: drivers/net/wan/pc300too.c
F: drivers/net/wan/pci200syn.c
F: drivers/net/wan/wanxl*
GENERIC INCLUDE/ASM HEADER FILES
P: Arnd Bergmann
M: arnd@arndb.de
L: linux-arch@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
S: Maintained
F: include/asm-generic
GFS2 FILE SYSTEM
P: Steven Whitehouse
M: swhiteho@redhat.com
@ -2766,7 +2851,9 @@ S: Maintained
IA64 (Itanium) PLATFORM
P: Tony Luck
P: Fenghua Yu
M: tony.luck@intel.com
M: fenghua.yu@intel.com
L: linux-ia64@vger.kernel.org
W: http://www.ia64-linux.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@ -2795,10 +2882,10 @@ S: Supported
F: drivers/scsi/ips.*
IDE SUBSYSTEM
P: Bartlomiej Zolnierkiewicz
M: bzolnier@gmail.com
P: David S. Miller
M: davem@davemloft.net
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
S: Maintained
F: Documentation/ide/
F: drivers/ide/
@ -2846,7 +2933,7 @@ P: Sergey Lapin
M: slapin@ossfans.org
L: linux-zigbee-devel@lists.sourceforge.net
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
S: Maintained
F: net/ieee802154/
F: drivers/ieee802154/
@ -3223,7 +3310,6 @@ W: http://www.linux-mtd.infradead.org/doc/jffs2.html
S: Maintained
F: fs/jffs2/
F: include/linux/jffs2.h
F: include/mtd/jffs2-user.h
JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
P: Stephen Tweedie
@ -5094,6 +5180,13 @@ L: sdhci-devel@lists.ossman.eu
S: Maintained
F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
P: Ben Dooks
M: ben-linux@fluff.org
L: sdhci-devel@lists.ossman.eu
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
SECURITY SUBSYSTEM
P: James Morris
M: jmorris@namei.org
@ -5485,8 +5578,8 @@ F: drivers/staging/
STARFIRE/DURALAN NETWORK DRIVER
P: Ion Badulescu
M: ionut@cs.columbia.edu
S: Maintained
M: ionut@badula.org
S: Odd Fixes
F: drivers/net/starfire*
STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
@ -5620,6 +5713,13 @@ F: drivers/misc/tifm*
F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
TI TWL4030 SERIES SOC CODEC DRIVER
P: Peter Ujfalusi
M: peter.ujfalusi@nokia.com
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/soc/codecs/twl4030*
TIPC NETWORK LAYER
P: Per Liden
M: per.liden@ericsson.com
@ -6216,6 +6316,14 @@ S: Maintained
F: Documentation/i2c/busses/i2c-viapro
F: drivers/i2c/busses/i2c-viapro.c
VIA SD/MMC CARD CONTROLLER DRIVER
P: Joseph Chan
M: JosephChan@via.com.tw
P: Harald Welte
M: HaraldWelte@viatech.com
S: Maintained
F: drivers/mmc/host/via-sdmmc.c
VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
P: Joseph Chan
M: JosephChan@via.com.tw

4
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
EXTRAVERSION =
SUBLEVEL = 31
EXTRAVERSION = -rc1
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*

6
arch/alpha/include/asm/percpu.h
View File

@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#ifndef MODULE
#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
#define PER_CPU_ATTRIBUTES
#define PER_CPU_DEF_ATTRIBUTES
#else
/*
* To calculate addresses of locally defined variables, GCC uses 32-bit
@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
: "=&r"(__ptr), "=&r"(tmp_gp)); \
(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
#define PER_CPU_ATTRIBUTES __used
#define PER_CPU_DEF_ATTRIBUTES __used
#endif /* MODULE */
@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#define __get_cpu_var(var) per_cpu_var(var)
#define __raw_get_cpu_var(var) per_cpu_var(var)
#define PER_CPU_ATTRIBUTES
#define PER_CPU_DEF_ATTRIBUTES
#endif /* SMP */

2
arch/alpha/mm/fault.c
View File

@ -146,7 +146,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
/* If for any reason at all we couldn't handle the fault,
make sure we exit gracefully rather than endlessly redo
the fault. */
fault = handle_mm_fault(mm, vma, address, cause > 0);
fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0);
up_read(&mm->mmap_sem);
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)

6
arch/arm/Kconfig
View File

@ -1241,7 +1241,7 @@ endmenu
menu "CPU Power Management"
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
source "drivers/cpufreq/Kconfig"
@ -1272,6 +1272,10 @@ config CPU_FREQ_PXA
default y
select CPU_FREQ_DEFAULT_GOV_USERSPACE
config CPU_FREQ_S3C64XX
bool "CPUfreq support for Samsung S3C64XX CPUs"
depends on CPU_FREQ && CPU_S3C6410
endif
source "drivers/cpuidle/Kconfig"

8
arch/arm/Kconfig.debug
View File

@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
output to the second serial port on these devices. Saying N will
cause the debug messages to appear on the first serial port.
config DEBUG_S3C_PORT
depends on DEBUG_LL && PLAT_S3C
bool "Kernel low-level debugging messages via S3C UART"
help
Say Y here if you want debug print routines to go to one of the
S3C internal UARTs. The chosen UART must have been configured
before it is used.
config DEBUG_S3C_UART
depends on PLAT_S3C
int "S3C UART to use for low-level debug"

9
arch/arm/boot/compressed/head.S
View File

@ -674,6 +674,15 @@ proc_types:
b __armv4_mmu_cache_off
b __armv5tej_mmu_cache_flush
#ifdef CONFIG_CPU_FEROCEON_OLD_ID
/* this conflicts with the standard ARMv5TE entry */
.long 0x41009260 @ Old Feroceon
.long 0xff00fff0
b __armv4_mmu_cache_on
b __armv4_mmu_cache_off
b __armv5tej_mmu_cache_flush
#endif
.word 0x66015261 @ FA526
.word 0xff01fff1
b __fa526_cache_on

2
arch/arm/common/gic.c
View File

@ -117,7 +117,7 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
u32 val;
spin_lock(&irq_controller_lock);
irq_desc[irq].cpu = cpu;
irq_desc[irq].node = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);

8
arch/arm/common/vic.c
View File

@ -229,14 +229,18 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
{
struct vic_device *v = vic_from_irq(irq);
unsigned int off = irq & 31;
u32 bit = 1 << off;
if (!v)
return -EINVAL;
if (!(bit & v->resume_sources))
return -EINVAL;
if (on)
v->resume_irqs |= 1 << off;
v->resume_irqs |= bit;
else
v->resume_irqs &= ~(1 << off);
v->resume_irqs &= ~bit;
return 0;
}

2097
arch/arm/configs/mini2440_defconfig 100644
View File

File diff suppressed because it is too large Load Diff

2
arch/arm/configs/s3c2410_defconfig
View File

@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
CONFIG_SMDK2440_CPU2440=y
CONFIG_MACH_AT2440EVB=y
CONFIG_CPU_S3C2442=y
CONFIG_MACH_MINI2440=y
#
# S3C2442 Machines
@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#

1
arch/arm/configs/s3c6400_defconfig
View File

@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#

1
arch/arm/configs/tct_hammer_defconfig
View File

@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_S3C_PORT is not set
CONFIG_DEBUG_S3C_UART=0
#

2
arch/arm/include/asm/page.h
View File

@ -12,7 +12,7 @@
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifndef __ASSEMBLY__

2
arch/arm/include/asm/unistd.h
View File

@ -389,6 +389,8 @@
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
#define __NR_preadv (__NR_SYSCALL_BASE+361)
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
#define __NR_perf_counter_open (__NR_SYSCALL_BASE+364)
/*
* The following SWIs are ARM private.

2
arch/arm/kernel/calls.S
View File

@ -372,6 +372,8 @@
/* 360 */ CALL(sys_inotify_init1)
CALL(sys_preadv)
CALL(sys_pwritev)
CALL(sys_rt_tgsigqueueinfo)
CALL(sys_perf_counter_open)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

28
arch/arm/kernel/irq.c
View File

@ -98,17 +98,6 @@ unlock:
return 0;
}
/* Handle bad interrupts */
static struct irq_desc bad_irq_desc = {
.handle_irq = handle_bad_irq,
.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
};
#ifdef CONFIG_CPUMASK_OFFSTACK
/* We are not allocating bad_irq_desc.affinity or .pending_mask */
#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
#endif
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (irq >= NR_IRQS)
handle_bad_irq(irq, &bad_irq_desc);
else
if (unlikely(irq >= NR_IRQS)) {
if (printk_ratelimit())
printk(KERN_WARNING "Bad IRQ%u\n", irq);
ack_bad_irq(irq);
} else {
generic_handle_irq(irq);
}
/* AT91 specific workaround */
irq_finish(irq);
@ -165,10 +157,6 @@ void __init init_IRQ(void)
for (irq = 0; irq < NR_IRQS; irq++)
irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
#ifdef CONFIG_SMP
cpumask_setall(bad_irq_desc.affinity);
bad_irq_desc.cpu = smp_processor_id();
#endif
init_arch_irq();
}
@ -176,7 +164,7 @@ void __init init_IRQ(void)
static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
{
pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->node, cpu);
spin_lock_irq(&desc->lock);
desc->chip->set_affinity(irq, cpumask_of(cpu));
@ -195,7 +183,7 @@ void migrate_irqs(void)
for (i = 0; i < NR_IRQS; i++) {
struct irq_desc *desc = irq_desc + i;
if (desc->cpu == cpu) {
if (desc->node == cpu) {
unsigned int newcpu = cpumask_any_and(desc->affinity,
cpu_online_mask);
if (newcpu >= nr_cpu_ids) {

77
arch/arm/kernel/process.c
View File

@ -114,9 +114,6 @@ void arm_machine_restart(char mode, const char *cmd)
/*
* Function pointers to optional machine specific functions
*/
void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
@ -130,20 +127,19 @@ EXPORT_SYMBOL_GPL(arm_pm_restart);
*/
static void default_idle(void)
{
if (hlt_counter)
cpu_relax();
else {
local_irq_disable();
if (!need_resched())
arch_idle();
local_irq_enable();
}
if (!need_resched())
arch_idle();
local_irq_enable();
}
void (*pm_idle)(void) = default_idle;
EXPORT_SYMBOL(pm_idle);
/*
* The idle thread. We try to conserve power, while trying to keep
* overall latency low. The architecture specific idle is passed
* a value to indicate the level of "idleness" of the system.
* The idle thread, has rather strange semantics for calling pm_idle,
* but this is what x86 does and we need to do the same, so that
* things like cpuidle get called in the same way. The only difference
* is that we always respect 'hlt_counter' to prevent low power idle.
*/
void cpu_idle(void)
{
@ -151,21 +147,31 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
void (*idle)(void) = pm_idle;
tick_nohz_stop_sched_tick(1);
leds_event(led_idle_start);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id())) {
leds_event(led_idle_start);
cpu_die();
}
if (cpu_is_offline(smp_processor_id()))
cpu_die();
#endif
if (!idle)
idle = default_idle;
leds_event(led_idle_start);
tick_nohz_stop_sched_tick(1);
while (!need_resched())
idle();
local_irq_disable();
if (hlt_counter) {
local_irq_enable();
cpu_relax();
} else {
stop_critical_timings();
pm_idle();
start_critical_timings();
/*
* This will eventually be removed - pm_idle
* functions should always return with IRQs
* enabled.
*/
WARN_ON(irqs_disabled());
local_irq_enable();
}
}
leds_event(led_idle_end);
tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
@ -352,6 +358,23 @@ asm( ".section .text\n"
" .size kernel_thread_helper, . - kernel_thread_helper\n"
" .previous");
#ifdef CONFIG_ARM_UNWIND
extern void kernel_thread_exit(long code);
asm( ".section .text\n"
" .align\n"
" .type kernel_thread_exit, #function\n"
"kernel_thread_exit:\n"
" .fnstart\n"
" .cantunwind\n"
" bl do_exit\n"
" nop\n"
" .fnend\n"
" .size kernel_thread_exit, . - kernel_thread_exit\n"
" .previous");
#else
#define kernel_thread_exit do_exit
#endif
/*
* Create a kernel thread.
*/
@ -363,7 +386,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
regs.ARM_r1 = (unsigned long)arg;
regs.ARM_r2 = (unsigned long)fn;
regs.ARM_r3 = (unsigned long)do_exit;
regs.ARM_r3 = (unsigned long)kernel_thread_exit;
regs.ARM_pc = (unsigned long)kernel_thread_helper;
regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;

19
arch/arm/kernel/unwind.c
View File

@ -212,7 +212,8 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
ctrl->vrs[14] = *vsp++;
ctrl->vrs[SP] = (unsigned long)vsp;
} else if (insn == 0xb0) {
ctrl->vrs[PC] = ctrl->vrs[LR];
if (ctrl->vrs[PC] == 0)
ctrl->vrs[PC] = ctrl->vrs[LR];
/* no further processing */
ctrl->entries = 0;
} else if (insn == 0xb1) {
@ -309,18 +310,20 @@ int unwind_frame(struct stackframe *frame)
}
while (ctrl.entries > 0) {
int urc;
if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
return -URC_FAILURE;
urc = unwind_exec_insn(&ctrl);
int urc = unwind_exec_insn(&ctrl);
if (urc < 0)
return urc;
if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
return -URC_FAILURE;
}
if (ctrl.vrs[PC] == 0)
ctrl.vrs[PC] = ctrl.vrs[LR];
/* check for infinite loop */
if (frame->pc == ctrl.vrs[PC])
return -URC_FAILURE;
frame->fp = ctrl.vrs[FP];
frame->sp = ctrl.vrs[SP];
frame->lr = ctrl.vrs[LR];
@ -332,7 +335,6 @@ int unwind_frame(struct stackframe *frame)
void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
{
struct stackframe frame;
unsigned long high, low;
register unsigned long current_sp asm ("sp");
pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
@ -362,9 +364,6 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
frame.pc = thread_saved_pc(tsk);
}
low = frame.sp & ~(THREAD_SIZE - 1);
high = low + THREAD_SIZE;
while (1) {
int urc;
unsigned long where = frame.pc;

23
arch/arm/kernel/vmlinux.lds.S
View File

@ -6,6 +6,7 @@
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/page.h>
OUTPUT_ARCH(arm)
ENTRY(stext)
@ -63,7 +64,7 @@ SECTIONS
usr/built-in.o(.init.ramfs)
__initramfs_end = .;
#endif
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__per_cpu_load = .;
__per_cpu_start = .;
*(.data.percpu.page_aligned)
@ -73,7 +74,7 @@ SECTIONS
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
}
@ -84,6 +85,14 @@ SECTIONS
*(.exitcall.exit)
*(.ARM.exidx.exit.text)
*(.ARM.extab.exit.text)
#ifndef CONFIG_HOTPLUG_CPU
*(.ARM.exidx.cpuexit.text)
*(.ARM.extab.cpuexit.text)
#endif
#ifndef CONFIG_HOTPLUG
*(.ARM.exidx.devexit.text)
*(.ARM.extab.devexit.text)
#endif
#ifndef CONFIG_MMU
*(.fixup)
*(__ex_table)
@ -110,7 +119,7 @@ SECTIONS
*(.got) /* Global offset table */
}
RODATA
RO_DATA(PAGE_SIZE)
_etext = .; /* End of text and rodata section */
@ -150,17 +159,17 @@ SECTIONS
*(.data.init_task)
#ifdef CONFIG_XIP_KERNEL
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_DATA
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__nosave_begin = .;
*(.data.nosave)
. = ALIGN(4096);
. = ALIGN(PAGE_SIZE);
__nosave_end = .;
/*

54
arch/arm/mach-at91/board-sam9g20ek.c
View File

@ -24,6 +24,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/clk.h>
#include <mach/hardware.h>
@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = {
}
};
/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button ek_buttons[] = {
{
.gpio = AT91_PIN_PA30,
.code = BTN_3,
.desc = "Button 3",
.active_low = 1,
.wakeup = 1,
},
{
.gpio = AT91_PIN_PA31,
.code = BTN_4,
.desc = "Button 4",
.active_low = 1,
.wakeup = 1,
}
};
static struct gpio_keys_platform_data ek_button_data = {
.buttons = ek_buttons,
.nbuttons = ARRAY_SIZE(ek_buttons),
};
static struct platform_device ek_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &ek_button_data,
}
};
static void __init ek_add_device_buttons(void)
{
at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
at91_set_deglitch(AT91_PIN_PA30, 1);
at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
at91_set_deglitch(AT91_PIN_PA31, 1);
platform_device_register(&ek_button_device);
}
#else
static void __init ek_add_device_buttons(void) {}
#endif
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
@ -245,6 +297,8 @@ static void __init ek_board_init(void)
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
ek_add_device_buttons();
/* PCK0 provides MCLK to the WM8731 */
at91_set_B_periph(AT91_PIN_PC1, 0);
/* SSC (for WM8731) */

6
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
static void at91_lcdc_power_control(int on)
{
if (on)
at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
else
at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
}
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_power_control,
.guard_time = 1,
.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else

8
arch/arm/mach-davinci/include/mach/nand.h
View File

@ -68,10 +68,14 @@ struct davinci_nand_pdata { /* platform_data */
/* none == NAND_ECC_NONE (strongly *not* advised!!)
* soft == NAND_ECC_SOFT
* 1-bit == NAND_ECC_HW
* 4-bit == NAND_ECC_HW_SYNDROME (not on all chips)
* else == NAND_ECC_HW, according to ecc_bits
*
* All DaVinci-family chips support 1-bit hardware ECC.
* Newer ones also support 4-bit ECC, but are awkward
* using it with large page chips.
*/
nand_ecc_modes_t ecc_mode;
u8 ecc_bits;
/* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
unsigned options;

3
arch/arm/mach-omap1/board-nokia770.c
View File

@ -36,7 +36,6 @@
#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
static struct omap_mmc_platform_data nokia770_mmc2_data = {
.nr_slots = 1,
.dma_mask = 0xffffffff,
.max_freq = 12000000,
.slots[0] = {
.set_power = nokia770_mmc_set_power,
.get_cover_state = nokia770_mmc_get_cover_state,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.name = "mmcblk",
},
};

2
arch/arm/mach-omap1/mailbox.c
View File

@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
MODULE_ALIAS("platform:omap1-mailbox");

1
arch/arm/mach-omap2/board-rx51-peripherals.c
View File

@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
.gpio_irq = 65,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
.flags = ONENAND_SYNC_READWRITE,
};
static void __init board_onenand_init(void)

2
arch/arm/mach-omap2/clock.c
View File

@ -302,7 +302,7 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
udelay(1);
}
if (i < MAX_CLOCK_ENABLE_WAIT)
if (i <= MAX_CLOCK_ENABLE_WAIT)
pr_debug("Clock %s stable after %d loops\n", name, i);
else
printk(KERN_ERR "Clock %s didn't enable in %d tries\n",

42
arch/arm/mach-omap2/clock34xx.c
View File

@ -286,6 +286,20 @@ static struct omap_clk omap34xx_clks[] = {
#define MIN_SDRC_DLL_LOCK_FREQ 83000000
#define CYCLES_PER_MHZ 1000000
/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
#define SDRC_MPURATE_SCALE 8
/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
#define SDRC_MPURATE_BASE_SHIFT 9
/*
* SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
* 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
*/
#define SDRC_MPURATE_LOOPS 96
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
@ -709,7 +723,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
{
u32 new_div = 0;
u32 unlock_dll = 0;
unsigned long validrate, sdrcrate;
u32 c;
unsigned long validrate, sdrcrate, mpurate;
struct omap_sdrc_params *sp;
if (!clk || !rate)
@ -718,18 +733,15 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
if (clk != &dpll3_m2_ck)
return -EINVAL;
if (rate == clk->rate)
return 0;
validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
if (validrate != rate)
return -EINVAL;
sdrcrate = sdrc_ick.rate;
if (rate > clk->rate)
sdrcrate <<= ((rate / clk->rate) - 1);
sdrcrate <<= ((rate / clk->rate) >> 1);
else
sdrcrate >>= ((clk->rate / rate) - 1);
sdrcrate >>= ((clk->rate / rate) >> 1);
sp = omap2_sdrc_get_params(sdrcrate);
if (!sp)
@ -740,17 +752,25 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
unlock_dll = 1;
}
/*
* XXX This only needs to be done when the CPU frequency changes
*/
mpurate = arm_fck.rate / CYCLES_PER_MHZ;
c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
c += 1; /* for safety */
c *= SDRC_MPURATE_LOOPS;
c >>= SDRC_MPURATE_SCALE;
if (c == 0)
c = 1;
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
/* REVISIT: SRAM code doesn't support other M2 divisors yet */
WARN_ON(new_div != 1 && new_div != 2);
/* REVISIT: Add SDRC_MR changing to this code also */
omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
sp->actim_ctrlb, new_div, unlock_dll);
sp->actim_ctrlb, new_div, unlock_dll, c,
sp->mr, rate > clk->rate);
return 0;
}

21
arch/arm/mach-omap2/gpmc-onenand.c
View File

@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
{
struct gpmc_timings t;
u32 reg;
int err;
const int t_cer = 15;
const int t_avdp = 12;
@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
const int t_wpl = 40;
const int t_wph = 30;
/* Ensure sync read and sync write are disabled */
reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
memset(&t, 0, sizeof(t));
t.sync_clk = 0;
t.cs_on = 0;
@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
GPMC_CONFIG1_DEVICESIZE_16 |
GPMC_CONFIG1_MUXADDDATA);
return gpmc_cs_set_timings(cs, &t);
err = gpmc_cs_set_timings(cs, &t);
if (err)
return err;
/* Ensure sync read and sync write are disabled */
reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
return 0;
}
static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
sync_read = 1;
sync_write = 1;
}
} else
return omap2_onenand_set_async_mode(cs, onenand_base);
if (!freq) {
/* Very first call freq is not known */

22
arch/arm/mach-omap2/id.c
View File

@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
}
EXPORT_SYMBOL(omap_chip_is);
int omap_type(void)
{
u32 val = 0;
if (cpu_is_omap24xx())
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
else if (cpu_is_omap34xx())
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
else {
pr_err("Cannot detect omap type!\n");
goto out;
}
val &= OMAP2_DEVICETYPE_MASK;
val >>= 8;
out:
return val;
}
EXPORT_SYMBOL(omap_type);
/*----------------------------------------------------------------------------*/
#define OMAP_TAP_IDCODE 0x0204

36
arch/arm/mach-omap2/io.c
View File

@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <asm/tlb.h>
@ -241,6 +242,40 @@ void __init omap2_map_common_io(void)
omapfb_reserve_sdram();
}
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*
* Sets the CORE DPLL3 M2 divider to the same value that it's at
* currently. This has the effect of setting the SDRC SDRAM AC timing
* registers to the values currently defined by the kernel. Currently
* only defined for OMAP3; will return 0 if called on OMAP2. Returns
* -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
* or passes along the return value of clk_set_rate().
*/
static int __init _omap2_init_reprogram_sdrc(void)
{
struct clk *dpll3_m2_ck;
int v = -EINVAL;
long rate;
if (!cpu_is_omap34xx())
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
if (!dpll3_m2_ck)
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
v = clk_set_rate(dpll3_m2_ck, rate);
if (v)
pr_err("dpll3_m2_clk rate change failed: %d\n", v);
clk_put(dpll3_m2_ck);
return v;
}
void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{
omap2_mux_init();
@ -249,6 +284,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
omap2_sdrc_init(sp);
_omap2_init_reprogram_sdrc();
#endif
gpmc_init();
}

6
arch/arm/mach-omap2/mailbox.c
View File

@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
return -ENOMEM;
/* DSP or IVA2 IRQ */
mbox_dsp_info.irq = platform_get_irq(pdev, 0);
if (mbox_dsp_info.irq < 0) {
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(&pdev->dev, "invalid irq resource\n");
ret = -ENODEV;
goto err_dsp;
}
mbox_dsp_info.irq = ret;
ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
if (ret)

13
arch/arm/mach-omap2/mmc-twl4030.c
View File

@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
int ret = 0;
struct twl_mmc_controller *c = &hsmmc[1];
struct twl_mmc_controller *c = NULL;
struct omap_mmc_platform_data *mmc = dev->platform_data;
int i;
for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
if (mmc == hsmmc[i].mmc) {
c = &hsmmc[i];
break;
}
}
if (c == NULL)
return -ENODEV;
/* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.

2
arch/arm/mach-omap2/powerdomain.c
View File

@ -1099,7 +1099,7 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
if (c >= PWRDM_TRANSITION_BAILOUT) {
if (c > PWRDM_TRANSITION_BAILOUT) {
printk(KERN_ERR "powerdomain: waited too long for "
"powerdomain %s to complete transition\n", pwrdm->name);
return -EAGAIN;

129
arch/arm/mach-omap2/sram34xx.S
View File

@ -3,13 +3,12 @@
*
* Omap3 specific functions that need to be run in internal SRAM
*
* (C) Copyright 2007
* Texas Instruments Inc.
* Rajendra Nayak <rnayak@ti.com>
* Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
* Copyright (C) 2008 Nokia Corporation
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Rajendra Nayak <rnayak@ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@ -37,61 +36,112 @@
.text
/* r4 parameters */
#define SDRC_NO_UNLOCK_DLL 0x0
#define SDRC_UNLOCK_DLL 0x1
/* SDRC_DLLA_CTRL bit settings */
#define FIXEDDELAY_SHIFT 24
#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT)
#define DLLIDLE_MASK 0x4
/*
* Change frequency of core dpll
* r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
* r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
* SDRC_DLLA_CTRL default values: TI hardware team indicates that
* FIXEDDELAY should be initialized to 0xf. This apparently was
* empirically determined during process testing, so no derivation
* was provided.
*/
#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT)
/* SDRC_DLLA_STATUS bit settings */
#define LOCKSTATUS_MASK 0x4
/* SDRC_POWER bit settings */
#define SRFRONIDLEREQ_MASK 0x40
#define PWDENA_MASK 0x4
/* CM_IDLEST1_CORE bit settings */
#define ST_SDRC_MASK 0x2
/* CM_ICLKEN1_CORE bit settings */
#define EN_SDRC_MASK 0x2
/* CM_CLKSEL1_PLL bit settings */
#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b
/*
* omap3_sram_configure_core_dpll - change DPLL3 M2 divider
* r0 = new SDRC_RFR_CTRL register contents
* r1 = new SDRC_ACTIM_CTRLA register contents
* r2 = new SDRC_ACTIM_CTRLB register contents
* r3 = new M2 divider setting (only 1 and 2 supported right now)
* r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
* SDRC rates < 83MHz
* r5 = number of MPU cycles to wait for SDRC to stabilize after
* reprogramming the SDRC when switching to a slower MPU speed
* r6 = new SDRC_MR_0 register value
* r7 = increasing SDRC rate? (1 = yes, 0 = no)
*
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
ldr r4, [sp, #52] @ pull extra args off the stack
ldr r5, [sp, #56] @ load extra args from the stack
ldr r6, [sp, #60] @ load extra args from the stack
ldr r7, [sp, #64] @ load extra args from the stack
dsb @ flush buffered writes to interconnect
cmp r3, #0x2
blne configure_sdrc
cmp r4, #0x1
cmp r7, #1 @ if increasing SDRC clk rate,
bleq configure_sdrc @ program the SDRC regs early (for RFR)
cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state
bleq unlock_dll
blne lock_dll
bl sdram_in_selfrefresh @ put the SDRAM in self refresh
bl configure_core_dpll
bl enable_sdrc
cmp r4, #0x1
bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
bl configure_core_dpll @ change the DPLL3 M2 divider
bl enable_sdrc @ take SDRC out of idle
cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change
bleq wait_dll_unlock
blne wait_dll_lock
cmp r3, #0x1
blne configure_sdrc
cmp r7, #1 @ if increasing SDRC clk rate,
beq return_to_sdram @ return to SDRAM code, otherwise,
bl configure_sdrc @ reprogram SDRC regs now
mov r12, r5
bl wait_clk_stable @ wait for SDRC to stabilize
return_to_sdram:
isb @ prevent speculative exec past here
mov r0, #0 @ return value
ldmfd sp!, {r1-r12, pc} @ restore regs and return
unlock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
orr r12, r12, #0x4
and r12, r12, #FIXEDDELAY_MASK
orr r12, r12, #FIXEDDELAY_DEFAULT
orr r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
bx lr
lock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
bic r12, r12, #0x4
bic r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
bx lr
sdram_in_selfrefresh:
ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
ldr r12, [r11] @ read the contents of SDRC_POWER
mov r9, r12 @ keep a copy of SDRC_POWER bits
orr r12, r12, #0x40 @ enable self refresh on idle req
bic r12, r12, #0x4 @ clear PWDENA
orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
bic r12, r12, #PWDENA_MASK @ clear PWDENA
str r12, [r11] @ write back to SDRC_POWER register
ldr r12, [r11] @ posted-write barrier for SDRC
idle_sdrc:
ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
ldr r12, [r11]
bic r12, r12, #0x2 @ disable iclk bit for SDRC
bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC
str r12, [r11]
wait_sdrc_idle:
ldr r11, omap3_cm_idlest1_core
ldr r12, [r11]
and r12, r12, #0x2 @ check for SDRC idle
cmp r12, #2
and r12, r12, #ST_SDRC_MASK @ check for SDRC idle
cmp r12, #ST_SDRC_MASK
bne wait_sdrc_idle
bx lr
configure_core_dpll:
@ -99,36 +149,23 @@ configure_core_dpll:
ldr r12, [r11]
ldr r10, core_m2_mask_val @ modify m2 for core dpll
and r12, r12, r10
orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val
orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
str r12, [r11]
ldr r12, [r11] @ posted-write barrier for CM
mov r12, #0x800 @ wait for the clock to stabilise
cmp r3, #2
bne wait_clk_stable
bx lr
wait_clk_stable:
subs r12, r12, #1
bne wait_clk_stable
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
bx lr
enable_sdrc:
ldr r11, omap3_cm_iclken1_core
ldr r12, [r11]
orr r12, r12, #0x2 @ enable iclk bit for SDRC
orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC
str r12, [r11]
wait_sdrc_idle1:
ldr r11, omap3_cm_idlest1_core
ldr r12, [r11]
and r12, r12, #0x2
and r12, r12, #ST_SDRC_MASK
cmp r12, #0
bne wait_sdrc_idle1
restore_sdrc_power_val:
@ -138,14 +175,14 @@ restore_sdrc_power_val:
wait_dll_lock:
ldr r11, omap3_sdrc_dlla_status
ldr r12, [r11]
and r12, r12, #0x4
cmp r12, #0x4
and r12, r12, #LOCKSTATUS_MASK
cmp r12, #LOCKSTATUS_MASK
bne wait_dll_lock
bx lr
wait_dll_unlock:
ldr r11, omap3_sdrc_dlla_status
ldr r12, [r11]
and r12, r12, #0x4
and r12, r12, #LOCKSTATUS_MASK
cmp r12, #0x0
bne wait_dll_unlock
bx lr
@ -156,7 +193,9 @@ configure_sdrc:
str r1, [r11]
ldr r11, omap3_sdrc_actim_ctrlb
str r2, [r11]
ldr r2, [r11] @ posted-write barrier for SDRC
ldr r11, omap3_sdrc_mr_0
str r6, [r11]
ldr r6, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
@ -173,6 +212,8 @@ omap3_sdrc_actim_ctrla:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
omap3_sdrc_actim_ctrlb:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
omap3_sdrc_mr_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
omap3_sdrc_dlla_status:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
omap3_sdrc_dlla_ctrl:

2
arch/arm/mach-orion5x/addr-map.c
View File

@ -200,6 +200,6 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
int __init orion5x_setup_sram_win(void)
{
return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
return setup_cpu_win(win_alloc_count++, ORION5X_SRAM_PHYS_BASE,
ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
}

10
arch/arm/mach-orion5x/common.c
View File

@ -562,7 +562,7 @@ static struct platform_device orion5x_crypto_device = {
.resource = orion5x_crypto_res,
};
int __init orion5x_crypto_init(void)
static int __init orion5x_crypto_init(void)
{
int ret;
@ -696,6 +696,14 @@ void __init orion5x_init(void)
disable_hlt();
}
/*
* The 5082/5181l/5182/6082/6082l/6183 have crypto
* while 5180n/5181/5281 don't have crypto.
*/
if ((dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) ||
dev == MV88F5182_DEV_ID || dev == MV88F6183_DEV_ID)
orion5x_crypto_init();
/*
* Register watchdog driver
*/

1
arch/arm/mach-orion5x/common.h
View File

@ -38,7 +38,6 @@ void orion5x_spi_init(void);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
void orion5x_xor_init(void);
int orion5x_crypto_init(void);
/*
* PCIe/PCI functions.

10
arch/arm/mach-pxa/Kconfig
View File

@ -401,6 +401,16 @@ config MACH_PALMZ72
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config MACH_PALMLD
bool "Palm LifeDrive"
default y

1
arch/arm/mach-pxa/Makefile
View File

@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_MACH_TREO680) += treo680.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)

6
arch/arm/mach-pxa/corgi.c
View File

@ -23,6 +23,7 @@
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/backlight.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@ -600,6 +601,10 @@ static struct platform_device *devices[] __initdata = {
&sharpsl_rom_device,
};
static struct i2c_board_info __initdata corgi_i2c_devices[] = {
{ I2C_BOARD_INFO("wm8731", 0x1b) },
};
static void corgi_poweroff(void)
{
if (!machine_is_corgi())
@ -634,6 +639,7 @@ static void __init corgi_init(void)
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
platform_scoop_config = &corgi_pcmcia_config;

63
arch/arm/mach-pxa/em-x270.c
View File

@ -30,6 +30,7 @@
#include <linux/apm-emulation.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/regulator/userspace-consumer.h>
#include <media/soc_camera.h>
@ -735,6 +736,7 @@ static struct pxa2xx_spi_chip em_x270_libertas_chip = {
.rx_threshold = 1,
.tx_threshold = 1,
.timeout = 1000,
.gpio_cs = 14,
};
static unsigned long em_x270_libertas_pin_config[] = {
@ -803,7 +805,6 @@ static int em_x270_libertas_teardown(struct spi_device *spi)
struct libertas_spi_platform_data em_x270_libertas_pdata = {
.use_dummy_writes = 1,
.gpio_cs = 14,
.setup = em_x270_libertas_setup,
.teardown = em_x270_libertas_teardown,
};
@ -838,10 +839,14 @@ static void __init em_x270_init_spi(void)
static inline void em_x270_init_spi(void) {}
#endif
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
static pxa2xx_audio_ops_t em_x270_ac97_info = {
.reset_gpio = 113,
};
static void __init em_x270_init_ac97(void)
{
pxa_set_ac97_info(NULL);
pxa_set_ac97_info(&em_x270_ac97_info);
}
#else
static inline void em_x270_init_ac97(void) {}
@ -1038,6 +1043,52 @@ static void __init em_x270_init_camera(void)
static inline void em_x270_init_camera(void) {}
#endif
static struct regulator_bulk_data em_x270_gps_consumer_supply = {
.supply = "vcc gps",
};
static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
.name = "vcc gps",
.num_supplies = 1,
.supplies = &em_x270_gps_consumer_supply,
};
static struct platform_device em_x270_gps_userspace_consumer = {
.name = "reg-userspace-consumer",
.id = 0,
.dev = {
.platform_data = &em_x270_gps_consumer_data,
},
};
static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
.supply = "vcc gprs",
};
static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
.name = "vcc gprs",
.num_supplies = 1,
.supplies = &em_x270_gprs_consumer_supply
};
static struct platform_device em_x270_gprs_userspace_consumer = {
.name = "reg-userspace-consumer",
.id = 1,
.dev = {
.platform_data = &em_x270_gprs_consumer_data,
}
};
static struct platform_device *em_x270_userspace_consumers[] = {
&em_x270_gps_userspace_consumer,
&em_x270_gprs_userspace_consumer,
};
static void __init em_x270_userspace_consumers_init(void)
{
platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
}
/* DA9030 related initializations */
#define REGULATOR_CONSUMER(_name, _dev, _supply) \
static struct regulator_consumer_supply _name##_consumers[] = { \
@ -1047,11 +1098,11 @@ static inline void em_x270_init_camera(void) {}
}, \
}
REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
REGULATOR_CONSUMER(ldo3, &em_x270_gps_userspace_consumer.dev, "vcc gps");
REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
static struct regulator_init_data _ldo##_data = { \
@ -1062,6 +1113,7 @@ REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
.enabled = 0, \
}, \
.valid_ops_mask = _ops_mask, \
.apply_uV = 1, \
}, \
.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
.consumer_supplies = _ldo##_consumers, \
@ -1240,6 +1292,7 @@ static void __init em_x270_init(void)
em_x270_init_spi();
em_x270_init_i2c();
em_x270_init_camera();
em_x270_userspace_consumers_init();
}
MACHINE_START(EM_X270, "Compulab EM-X270")

41
arch/arm/mach-pxa/hx4700.c
View File

@ -30,6 +30,7 @@
#include <linux/pwm_backlight.h>
#include <linux/regulator/bq24022.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max1586.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/spi.h>
#include <linux/usb/gpio_vbus.h>
@ -774,6 +775,45 @@ static struct platform_device strataflash = {
},
};
/*
* Maxim MAX1587A on PI2C
*/
static struct regulator_consumer_supply max1587a_consumer = {
.supply = "vcc_core",
};
static struct regulator_init_data max1587a_v3_info = {
.constraints = {
.name = "vcc_core range",
.min_uV = 900000,
.max_uV = 1705000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = 1,
.consumer_supplies = &max1587a_consumer,
};
static struct max1586_subdev_data max1587a_subdev = {
.name = "vcc_core",
.id = MAX1586_V3,
.platform_data = &max1587a_v3_info,
};
static struct max1586_platform_data max1587a_info = {
.num_subdevs = 1,
.subdevs = &max1587a_subdev,
.v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
};
static struct i2c_board_info __initdata pi2c_board_info[] = {
{
I2C_BOARD_INFO("max1586", 0x14),
.platform_data = &max1587a_info,
},
};
/*
* PCMCIA
*/
@ -828,6 +868,7 @@ static void __init hx4700_init(void)
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

5
arch/arm/mach-pxa/include/mach/palmz72.h
View File

@ -21,7 +21,7 @@
/* SD/MMC */
#define GPIO_NR_PALMZ72_SD_DETECT_N 14
#define GPIO_NR_PALMZ72_SD_POWER_N 98
#define GPIO_NR_PALMZ72_SD_RO 115
#define GPIO_NR_PALMZ72_SD_RO 115
/* Touchscreen */
#define GPIO_NR_PALMZ72_WM9712_IRQ 27
@ -31,8 +31,7 @@
/* USB */
#define GPIO_NR_PALMZ72_USB_DETECT_N 15
#define GPIO_NR_PALMZ72_USB_POWER 95
#define GPIO_NR_PALMZ72_USB_PULLUP 12
#define GPIO_NR_PALMZ72_USB_PULLUP 95
/* LCD/Backlight */
#define GPIO_NR_PALMZ72_BL_POWER 20

49
arch/arm/mach-pxa/include/mach/treo680.h 100644
View File

@ -0,0 +1,49 @@
/*
* GPIOs and interrupts for Palm Treo 680 smartphone
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _INCLUDE_TREO680_H_
#define _INCLUDE_TREO680_H_
/* GPIOs */
#define GPIO_NR_TREO680_POWER_DETECT 0
#define GPIO_NR_TREO680_AMP_EN 27
#define GPIO_NR_TREO680_KEYB_BL 24
#define GPIO_NR_TREO680_VIBRATE_EN 44
#define GPIO_NR_TREO680_GREEN_LED 20
#define GPIO_NR_TREO680_RED_LED 79
#define GPIO_NR_TREO680_SD_DETECT_N 113
#define GPIO_NR_TREO680_SD_READONLY 33
#define GPIO_NR_TREO680_EP_DETECT_N 116
#define GPIO_NR_TREO680_SD_POWER 42
#define GPIO_NR_TREO680_USB_DETECT 1
#define GPIO_NR_TREO680_USB_PULLUP 114
#define GPIO_NR_TREO680_GSM_POWER 40
#define GPIO_NR_TREO680_GSM_RESET 87
#define GPIO_NR_TREO680_GSM_WAKE 57
#define GPIO_NR_TREO680_GSM_HOST_WAKE 14
#define GPIO_NR_TREO680_GSM_TRIGGER 10
#define GPIO_NR_TREO680_BT_EN 43
#define GPIO_NR_TREO680_IR_EN 115
#define GPIO_NR_TREO680_IR_TXD 47
#define GPIO_NR_TREO680_BL_POWER 38
#define GPIO_NR_TREO680_LCD_POWER 25
/* Various addresses */
#define TREO680_PHYS_RAM_START 0xa0000000
#define TREO680_PHYS_IO_START 0x40000000
#define TREO680_STR_BASE 0xa2000000
/* BACKLIGHT */
#define TREO680_MAX_INTENSITY 254
#define TREO680_DEFAULT_INTENSITY 160
#define TREO680_LIMIT_MASK 0x7F
#define TREO680_PRESCALER 63
#define TREO680_PERIOD_NS 3500
#endif

42
arch/arm/mach-pxa/mioa701.c
View File

@ -37,6 +37,7 @@
#include <linux/wm97xx_batt.h>
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/regulator/max1586.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -716,6 +717,38 @@ static struct wm97xx_batt_info mioa701_battery_data = {
.batt_name = "mioa701_battery",
};
/*
* Voltage regulation
*/
static struct regulator_consumer_supply max1586_consumers[] = {
{
.supply = "vcc_core",
}
};
static struct regulator_init_data max1586_v3_info = {
.constraints = {
.name = "vcc_core range",
.min_uV = 1000000,
.max_uV = 1705000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
.consumer_supplies = max1586_consumers,
};
static struct max1586_subdev_data max1586_subdevs[] = {
{ .name = "vcc_core", .id = MAX1586_V3,
.platform_data = &max1586_v3_info },
};
static struct max1586_platform_data max1586_info = {
.subdevs = max1586_subdevs,
.num_subdevs = ARRAY_SIZE(max1586_subdevs),
.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
};
/*
* Camera interface
*/
@ -725,6 +758,13 @@ struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
.mclk_10khz = 5000,
};
static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
{
I2C_BOARD_INFO("max1586", 0x14),
.platform_data = &max1586_info,
},
};
static struct soc_camera_link iclink = {
.bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
};
@ -825,7 +865,9 @@ static void __init mioa701_machine_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
pxa_set_i2c_info(&i2c_pdata);
pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
}

65
arch/arm/mach-pxa/palmz72.c
View File

@ -27,7 +27,9 @@
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -41,6 +43,8 @@
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
#include <mach/pm.h>
#include "generic.h"
@ -66,6 +70,8 @@ static unsigned long palmz72_pin_config[] __initdata = {
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO113_AC97_nRESET,
/* IrDA */
GPIO49_GPIO, /* ir disable */
@ -77,8 +83,7 @@ static unsigned long palmz72_pin_config[] __initdata = {
/* USB */
GPIO15_GPIO, /* usb detect */
GPIO12_GPIO, /* usb pullup */
GPIO95_GPIO, /* usb power */
GPIO95_GPIO, /* usb pullup */
/* Matrix keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
@ -354,6 +359,22 @@ static struct platform_device palmz72_leds = {
}
};
/******************************************************************************
* UDC
******************************************************************************/
static struct gpio_vbus_mach_info palmz72_udc_info = {
.gpio_vbus = GPIO_NR_PALMZ72_USB_DETECT_N,
.gpio_pullup = GPIO_NR_PALMZ72_USB_PULLUP,
};
static struct platform_device palmz72_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
.dev = {
.platform_data = &palmz72_udc_info,
},
};
/******************************************************************************
* Power supply
******************************************************************************/
@ -421,6 +442,31 @@ static struct platform_device power_supply = {
},
};
/******************************************************************************
* WM97xx battery
******************************************************************************/
static struct wm97xx_batt_info wm97xx_batt_pdata = {
.batt_aux = WM97XX_AUX_ID3,
.temp_aux = WM97XX_AUX_ID2,
.charge_gpio = -1,
.max_voltage = PALMZ72_BAT_MAX_VOLTAGE,
.min_voltage = PALMZ72_BAT_MIN_VOLTAGE,
.batt_mult = 1000,
.batt_div = 414,
.temp_mult = 1,
.temp_div = 1,
.batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
.batt_name = "main-batt",
};
/******************************************************************************
* aSoC audio
******************************************************************************/
static struct platform_device palmz72_asoc = {
.name = "palm27x-asoc",
.id = -1,
};
/******************************************************************************
* Framebuffer
******************************************************************************/
@ -527,17 +573,32 @@ device_initcall(palmz72_pm_init);
static struct platform_device *devices[] __initdata = {
&palmz72_backlight,
&palmz72_leds,
&palmz72_asoc,
&power_supply,
&palmz72_gpio_vbus,
};
/* setup udc GPIOs initial state */
static void __init palmz72_udc_init(void)
{
if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
}
}
static void __init palmz72_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
set_pxa_fb_info(&palmz72_lcd_screen);
pxa_set_mci_info(&palmz72_mci_platform_data);
palmz72_udc_init();
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmz72_ficp_platform_data);
pxa_set_keypad_info(&palmz72_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}

6
arch/arm/mach-pxa/poodle.c
View File

@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/mtd/sharpsl.h>
@ -486,6 +487,10 @@ static struct platform_device *devices[] __initdata = {
&sharpsl_rom_device,
};
static struct i2c_board_info __initdata poodle_i2c_devices[] = {
{ I2C_BOARD_INFO("wm8731", 0x1b) },
};
static void poodle_poweroff(void)
{
arm_machine_restart('h', NULL);
@ -519,6 +524,7 @@ static void __init poodle_init(void)
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
poodle_init_spi();
}

612
arch/arm/mach-pxa/treo680.c 100644
View File

@ -0,0 +1,612 @@
/*
* Hardware definitions for Palm Treo 680
*
* Author: Tomas Cech <sleep_walker@suse.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* (find more info at www.hackndev.com)
*
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
#include <linux/w1-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/treo680.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/ohci.h>
#include <mach/pxa2xx-regs.h>
#include <mach/palmasoc.h>
#include <mach/camera.h>
#include <sound/pxa2xx-lib.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static unsigned long treo680_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO33_GPIO, /* SD read only */
GPIO113_GPIO, /* SD detect */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
/* PWM */
GPIO16_PWM0_OUT,
/* USB */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
/* MATRIX KEYPAD */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1,
GPIO102_KP_MKIN_2,
GPIO97_KP_MKIN_3,
GPIO98_KP_MKIN_4,
GPIO99_KP_MKIN_5,
GPIO91_KP_MKIN_6,
GPIO13_KP_MKIN_7,
GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
/* Quick Capture Interface */
GPIO84_CIF_FV,
GPIO85_CIF_LV,
GPIO53_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO81_CIF_DD_0,
GPIO55_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO50_CIF_DD_3,
GPIO52_CIF_DD_4,
GPIO48_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO12_CIF_DD_7,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* GSM */
GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */
GPIO34_FFUART_RXD,
GPIO35_FFUART_CTS,
GPIO39_FFUART_TXD,
GPIO41_FFUART_RTS,
/* MISC. */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */
GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */
GPIO116_GPIO, /* headphone detect */
GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
static int treo680_mci_init(struct device *dev,
irq_handler_t treo680_detect_int, void *data)
{
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
if (err)
goto err;
err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
if (err)
goto err2;
err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
goto err2;
}
err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
if (err)
goto err3;
err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
if (err)
goto err4;
err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
if (err)
goto err4;
err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
if (err)
goto err5;
return 0;
err5:
gpio_free(GPIO_NR_TREO680_SD_READONLY);
err4:
gpio_free(GPIO_NR_TREO680_SD_POWER);
err3:
free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
err2:
gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
err:
return err;
}
static void treo680_mci_exit(struct device *dev, void *data)
{
gpio_free(GPIO_NR_TREO680_SD_READONLY);
gpio_free(GPIO_NR_TREO680_SD_POWER);
free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
}
static void treo680_mci_power(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
}
static int treo680_mci_get_ro(struct device *dev)
{
return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
}
static struct pxamci_platform_data treo680_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.setpower = treo680_mci_power,
.get_ro = treo680_mci_get_ro,
.init = treo680_mci_init,
.exit = treo680_mci_exit,
};
/******************************************************************************
* GPIO keyboard
******************************************************************************/
static unsigned int treo680_matrix_keys[] = {
KEY(0, 0, KEY_F8), /* Red/Off/Power */
KEY(0, 1, KEY_LEFT),
KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
KEY(0, 3, KEY_L),
KEY(0, 4, KEY_A),
KEY(0, 5, KEY_Q),
KEY(0, 6, KEY_P),
KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
KEY(1, 1, KEY_RIGHT),
KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
KEY(1, 3, KEY_Z),
KEY(1, 4, KEY_S),
KEY(1, 5, KEY_W),
KEY(2, 0, KEY_F1), /* Phone */
KEY(2, 1, KEY_UP),
KEY(2, 2, KEY_0),
KEY(2, 3, KEY_X),
KEY(2, 4, KEY_D),
KEY(2, 5, KEY_E),
KEY(3, 0, KEY_F10), /* Calendar */
KEY(3, 1, KEY_DOWN),
KEY(3, 2, KEY_SPACE),
KEY(3, 3, KEY_C),
KEY(3, 4, KEY_F),
KEY(3, 5, KEY_R),
KEY(4, 0, KEY_F12), /* Mail */
KEY(4, 1, KEY_KPENTER),
KEY(4, 2, KEY_RIGHTALT), /* Alt */
KEY(4, 3, KEY_V),
KEY(4, 4, KEY_G),
KEY(4, 5, KEY_T),
KEY(5, 0, KEY_F9), /* Home */
KEY(5, 1, KEY_PAGEUP), /* Side up */
KEY(5, 2, KEY_DOT),
KEY(5, 3, KEY_B),
KEY(5, 4, KEY_H),
KEY(5, 5, KEY_Y),
KEY(6, 0, KEY_TAB), /* Side Activate */
KEY(6, 1, KEY_PAGEDOWN), /* Side down */
KEY(6, 2, KEY_ENTER),
KEY(6, 3, KEY_N),
KEY(6, 4, KEY_J),
KEY(6, 5, KEY_U),
KEY(7, 0, KEY_F6), /* Green/Call */
KEY(7, 1, KEY_O),
KEY(7, 2, KEY_BACKSPACE),
KEY(7, 3, KEY_M),
KEY(7, 4, KEY_K),
KEY(7, 5, KEY_I),
};
static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
.matrix_key_rows = 8,
.matrix_key_cols = 7,
.matrix_key_map = treo680_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
.direct_key_map = { KEY_CONNECT },
.direct_key_num = 1,
.debounce_interval = 30,
};
/******************************************************************************
* aSoC audio
******************************************************************************/
static pxa2xx_audio_ops_t treo680_ac97_pdata = {
.reset_gpio = 95,
};
/******************************************************************************
* Backlight
******************************************************************************/
static int treo680_backlight_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
if (ret)
goto err;
ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
if (ret)
goto err2;
ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
if (ret)
goto err3;
return 0;
err3:
gpio_free(GPIO_NR_TREO680_LCD_POWER);
err2:
gpio_free(GPIO_NR_TREO680_BL_POWER);
err:
return ret;
}
static int treo680_backlight_notify(int brightness)
{
gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
return TREO680_MAX_INTENSITY - brightness;
};
static void treo680_backlight_exit(struct device *dev)
{
gpio_free(GPIO_NR_TREO680_BL_POWER);
gpio_free(GPIO_NR_TREO680_LCD_POWER);
}
static struct platform_pwm_backlight_data treo680_backlight_data = {
.pwm_id = 0,
.max_brightness = TREO680_MAX_INTENSITY,
.dft_brightness = TREO680_DEFAULT_INTENSITY,
.pwm_period_ns = TREO680_PERIOD_NS,
.init = treo680_backlight_init,
.notify = treo680_backlight_notify,
.exit = treo680_backlight_exit,
};
static struct platform_device treo680_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &treo680_backlight_data,
},
};
/******************************************************************************
* IrDA
******************************************************************************/
static void treo680_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static int treo680_irda_startup(struct device *dev)
{
int err;
err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
if (err)
goto err1;
err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
if (err)
goto err2;
return 0;
err2:
dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
gpio_free(GPIO_NR_TREO680_IR_EN);
err1:
dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
return err;
}
static void treo680_irda_shutdown(struct device *dev)
{
gpio_free(GPIO_NR_TREO680_AMP_EN);
}
static struct pxaficp_platform_data treo680_ficp_info = {
.transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
.startup = treo680_irda_startup,
.shutdown = treo680_irda_shutdown,
.transceiver_mode = treo680_transceiver_mode,
};
/******************************************************************************
* UDC
******************************************************************************/
static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
.gpio_vbus = GPIO_NR_TREO680_USB_DETECT,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_TREO680_USB_PULLUP,
};
/******************************************************************************
* USB host
******************************************************************************/
static struct pxaohci_platform_data treo680_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT3,
.power_budget = 0,
};
/******************************************************************************
* Power supply
******************************************************************************/
static int power_supply_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
goto err1;
ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
if (ret)
goto err2;
return 0;
err2:
gpio_free(GPIO_NR_TREO680_POWER_DETECT);
err1:
return ret;
}
static int treo680_is_ac_online(void)
{
return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
}
static void power_supply_exit(struct device *dev)
{
gpio_free(GPIO_NR_TREO680_POWER_DETECT);
}
static char *treo680_supplicants[] = {
"main-battery",
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = treo680_is_ac_online,
.exit = power_supply_exit,
.supplied_to = treo680_supplicants,
.num_supplicants = ARRAY_SIZE(treo680_supplicants),
};
static struct platform_device power_supply = {
.name = "pda-power",
.id = -1,
.dev = {
.platform_data = &power_supply_info,
},
};
/******************************************************************************
* Vibra and LEDs
******************************************************************************/
static struct gpio_led gpio_leds[] = {
{
.name = "treo680:vibra:vibra",
.default_trigger = "none",
.gpio = GPIO_NR_TREO680_VIBRATE_EN,
},
{
.name = "treo680:green:led",
.default_trigger = "mmc0",
.gpio = GPIO_NR_TREO680_GREEN_LED,
},
{
.name = "treo680:keybbl:keybbl",
.default_trigger = "none",
.gpio = GPIO_NR_TREO680_KEYB_BL,
},
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device treo680_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpio_led_info,
}
};
/******************************************************************************
* Framebuffer
******************************************************************************/
/* TODO: add support for 324x324 */
static struct pxafb_mode_info treo680_lcd_modes[] = {
{
.pixclock = 86538,
.xres = 320,
.yres = 320,
.bpp = 16,
.left_margin = 20,
.right_margin = 8,
.upper_margin = 8,
.lower_margin = 5,
.hsync_len = 4,
.vsync_len = 1,
},
};
static struct pxafb_mach_info treo680_lcd_screen = {
.modes = treo680_lcd_modes,
.num_modes = ARRAY_SIZE(treo680_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Power management - standby
******************************************************************************/
static void __init treo680_pm_init(void)
{
static u32 resume[] = {
0xe3a00101, /* mov r0, #0x40000000 */
0xe380060f, /* orr r0, r0, #0x00f00000 */
0xe590f008, /* ldr pc, [r0, #0x08] */
};
/* this is where the bootloader jumps */
memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
}
/******************************************************************************
* Machine init
******************************************************************************/
static struct platform_device *devices[] __initdata = {
&treo680_backlight,
&treo680_leds,
&power_supply,
};
/* setup udc GPIOs initial state */
static void __init treo680_udc_init(void)
{
if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
gpio_free(GPIO_NR_TREO680_USB_PULLUP);
}
}
static void __init treo680_init(void)
{
treo680_pm_init();
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
pxa_set_keypad_info(&treo680_keypad_platform_data);
set_pxa_fb_info(&treo680_lcd_screen);
pxa_set_mci_info(&treo680_mci_platform_data);
treo680_udc_init();
pxa_set_udc_info(&treo680_udc_info);
pxa_set_ac97_info(&treo680_ac97_pdata);
pxa_set_ficp_info(&treo680_ficp_info);
pxa_set_ohci_info(&treo680_ohci_info);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(TREO680, "Palm Treo 680")
.phys_io = TREO680_PHYS_IO_START,
.io_pg_offst = io_p2v(0x40000000),
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = treo680_init,
MACHINE_END

1
arch/arm/mach-realview/realview_pbx.c
View File

@ -27,6 +27,7 @@
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/smp_twd.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>

1
arch/arm/mach-s3c2410/usb-simtec.c
View File

@ -22,7 +22,6 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>

10
arch/arm/mach-s3c2440/Kconfig
View File

@ -84,5 +84,15 @@ config MACH_AT2440EVB
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select CPU_S3C2440
select EEPROM_AT24
select LEDS_TRIGGER_BACKLIGHT
select SND_S3C24XX_SOC_S3C24XX_UDA134X
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
endmenu

1
arch/arm/mach-s3c2440/Makefile
View File

@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o

702
arch/arm/mach-s3c2440/mach-mini2440.c 100644
View File

@ -0,0 +1,702 @@
/* linux/arch/arm/mach-s3c2440/mach-mini2440.c
*
* Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
* Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
* and modifications by SBZ <sbz@spgui.org> and
* Weibing <http://weibing.blogbus.com> and
* Michel Pollet <buserror@gmail.com>
*
* For product information, visit http://code.google.com/p/mini2440/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/serial_core.h>
#include <linux/dm9000.h>
#include <linux/i2c/at24.h>
#include <linux/platform_device.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/mmc/host.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/irqs.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <plat/mci.h>
#include <plat/udc.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <sound/s3c24xx_uda134x.h>
#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
static struct map_desc mini2440_iodesc[] __initdata = {
/* nothing to declare, move along */
};
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
/* USB device UDC support */
static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{
pr_debug("udc: pullup(%d)\n", cmd);
switch (cmd) {
case S3C2410_UDC_P_ENABLE :
s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
break;
case S3C2410_UDC_P_DISABLE :
s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
break;
case S3C2410_UDC_P_RESET :
break;
default:
break;
}
}
static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
.udc_command = mini2440_udc_pullup,
};
/* LCD timing and setup */
/*
* This macro simplifies the table bellow
*/
#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
_yres,margin_top,margin_bottom,vsync, refresh) \
.width = _xres, \
.xres = _xres, \
.height = _yres, \
.yres = _yres, \
.left_margin = margin_left, \
.right_margin = margin_right, \
.upper_margin = margin_top, \
.lower_margin = margin_bottom, \
.hsync_len = hsync, \
.vsync_len = vsync, \
.pixclock = ((_clock*100000000000LL) / \
((refresh) * \
(hsync + margin_left + _xres + margin_right) * \
(vsync + margin_top + _yres + margin_bottom))), \
.bpp = 16,\
.type = (S3C2410_LCDCON1_TFT16BPP |\
S3C2410_LCDCON1_TFT)
struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
[0] = { /* mini2440 + 3.5" TFT + touchscreen */
_LCD_DECLARE(
7, /* The 3.5 is quite fast */
240, 21, 38, 6, /* x timing */
320, 4, 4, 2, /* y timing */
60), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_INVVDEN |
S3C2410_LCDCON5_PWREN),
},
[1] = { /* mini2440 + 7" TFT + touchscreen */
_LCD_DECLARE(
10, /* the 7" runs slower */
800, 40, 40, 48, /* x timing */
480, 29, 3, 3, /* y timing */
50), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN),
},
/* The VGA shield can outout at several resolutions. All share
* the same timings, however, anything smaller than 1024x768
* will only be displayed in the top left corner of a 1024x768
* XGA output unless you add optional dip switches to the shield.
* Therefore timings for other resolutions have been ommited here.
*/
[2] = {
_LCD_DECLARE(
10,
1024, 1, 2, 2, /* y timing */
768, 200, 16, 16, /* x timing */
24), /* refresh rate, maximum stable,
tested with the FPGA shield */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP),
},
};
/* todo - put into gpio header */
#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
.displays = &mini2440_lcd_cfg[0], /* not constant! see init */
.num_displays = 1,
.default_display = 0,
/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
* and disable the pull down resistors on pins we are using for LCD
* data. */
.gpcup = (0xf << 1) | (0x3f << 10),
.gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
.gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
.gpdup = (0x3f << 2) | (0x3f << 10),
.gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
.gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
};
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
.gpio_detect = S3C2410_GPG(8),
.gpio_wprotect = S3C2410_GPH(8),
.set_power = NULL,
.ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
/* NAND Flash on MINI2440 board */
static struct mtd_partition mini2440_default_nand_part[] __initdata = {
[0] = {
.name = "u-boot",
.size = SZ_256K,
.offset = 0,
},
[1] = {
.name = "u-boot-env",
.size = SZ_128K,
.offset = SZ_256K,
},
[2] = {
.name = "kernel",
/* 5 megabytes, for a kernel with no modules
* or a uImage with a ramdisk attached */
.size = 0x00500000,
.offset = SZ_256K + SZ_128K,
},
[3] = {
.name = "root",
.offset = SZ_256K + SZ_128K + 0x00500000,
.size = MTDPART_SIZ_FULL,
},
};
static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
[0] = {
.name = "nand",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
.flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
.tacls = 0,
.twrph0 = 25,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
};
/* DM9000AEP 10/100 ethernet controller */
static struct resource mini2440_dm9k_resource[] __initdata = {
[0] = {
.start = MACH_MINI2440_DM9K_BASE,
.end = MACH_MINI2440_DM9K_BASE + 3,
.flags = IORESOURCE_MEM
},
[1] = {
.start = MACH_MINI2440_DM9K_BASE + 4,
.end = MACH_MINI2440_DM9K_BASE + 7,
.flags = IORESOURCE_MEM
},
[2] = {
.start = IRQ_EINT7,
.end = IRQ_EINT7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
/*
* The DM9000 has no eeprom, and it's MAC address is set by
* the bootloader before starting the kernel.
*/
static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
static struct platform_device mini2440_device_eth __initdata = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(mini2440_dm9k_resource),
.resource = mini2440_dm9k_resource,
.dev = {
.platform_data = &mini2440_dm9k_pdata,
},
};
/* CON5
* +--+ /-----\
* | | | |
* | | | BAT |
* | | \_____/
* | |
* | | +----+ +----+
* | | | K5 | | K1 |
* | | +----+ +----+
* | | +----+ +----+
* | | | K4 | | K2 |
* | | +----+ +----+
* | | +----+ +----+
* | | | K6 | | K3 |
* | | +----+ +----+
* .....
*/
static struct gpio_keys_button mini2440_buttons[] __initdata = {
{
.gpio = S3C2410_GPG(0), /* K1 */
.code = KEY_F1,
.desc = "Button 1",
.active_low = 1,
},
{
.gpio = S3C2410_GPG(3), /* K2 */
.code = KEY_F2,
.desc = "Button 2",
.active_low = 1,
},
{
.gpio = S3C2410_GPG(5), /* K3 */
.code = KEY_F3,
.desc = "Button 3",
.active_low = 1,
},
{
.gpio = S3C2410_GPG(6), /* K4 */
.code = KEY_POWER,
.desc = "Power",
.active_low = 1,
},
{
.gpio = S3C2410_GPG(7), /* K5 */
.code = KEY_F5,
.desc = "Button 5",
.active_low = 1,
},
#if 0
/* this pin is also known as TCLK1 and seems to already
* marked as "in use" somehow in the kernel -- possibly wrongly */
{
.gpio = S3C2410_GPG(11), /* K6 */
.code = KEY_F6,
.desc = "Button 6",
.active_low = 1,
},
#endif
};
static struct gpio_keys_platform_data mini2440_button_data __initdata = {
.buttons = mini2440_buttons,
.nbuttons = ARRAY_SIZE(mini2440_buttons),
};
static struct platform_device mini2440_button_device __initdata = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &mini2440_button_data,
}
};
/* LEDS */
static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
.name = "led1",
.gpio = S3C2410_GPB(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "heartbeat",
};
static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
.name = "led2",
.gpio = S3C2410_GPB(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "nand-disk",
};
static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
.name = "led3",
.gpio = S3C2410_GPB(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "mmc0",
};
static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
.name = "led4",
.gpio = S3C2410_GPB(8),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.def_trigger = "",
};
static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
.name = "backlight",
.gpio = S3C2410_GPG(4),
.def_trigger = "backlight",
};
static struct platform_device mini2440_led1 __initdata = {
.name = "s3c24xx_led",
.id = 1,
.dev = {
.platform_data = &mini2440_led1_pdata,
},
};
static struct platform_device mini2440_led2 __initdata = {
.name = "s3c24xx_led",
.id = 2,
.dev = {
.platform_data = &mini2440_led2_pdata,
},
};
static struct platform_device mini2440_led3 __initdata = {
.name = "s3c24xx_led",
.id = 3,
.dev = {
.platform_data = &mini2440_led3_pdata,
},
};
static struct platform_device mini2440_led4 __initdata = {
.name = "s3c24xx_led",
.id = 4,
.dev = {
.platform_data = &mini2440_led4_pdata,
},
};
static struct platform_device mini2440_led_backlight __initdata = {
.name = "s3c24xx_led",
.id = 5,
.dev = {
.platform_data = &mini2440_led_backlight_pdata,
},
};
/* AUDIO */
static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
.l3_clk = S3C2410_GPB(4),
.l3_mode = S3C2410_GPB(2),
.l3_data = S3C2410_GPB(3),
.model = UDA134X_UDA1341
};
static struct platform_device mini2440_audio __initdata = {
.name = "s3c24xx_uda134x",
.id = 0,
.dev = {
.platform_data = &mini2440_audio_pins,
},
};
/*
* I2C devices
*/
static struct at24_platform_data at24c08 = {
.byte_len = SZ_8K / 8,
.page_size = 16,
};
static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("24c08", 0x50),
.platform_data = &at24c08,
},
};
static struct platform_device *mini2440_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_usbgadget,
&mini2440_device_eth,
&mini2440_led1,
&mini2440_led2,
&mini2440_led3,
&mini2440_led4,
&mini2440_button_device,
&s3c_device_nand,
&s3c_device_sdi,
&s3c_device_iis,
&mini2440_audio,
/* &s3c_device_timer[0],*/ /* buzzer pwm, no API for it */
/* remaining devices are optional */
};
static void __init mini2440_map_io(void)
{
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
s3c_device_nand.dev.platform_data = &mini2440_nand_info;
s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
}
/*
* mini2440_features string
*
* t = Touchscreen present
* b = backlight control
* c = camera [TODO]
* 0-9 LCD configuration
*
*/
static char mini2440_features_str[12] __initdata = "0tb";
static int __init mini2440_features_setup(char *str)
{
if (str)
strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
return 1;
}
__setup("mini2440=", mini2440_features_setup);
#define FEATURE_SCREEN (1 << 0)
#define FEATURE_BACKLIGHT (1 << 1)
#define FEATURE_TOUCH (1 << 2)
#define FEATURE_CAMERA (1 << 3)
struct mini2440_features_t {
int count;
int done;
int lcd_index;
struct platform_device *optional[8];
};
static void mini2440_parse_features(
struct mini2440_features_t * features,
const char * features_str )
{
const char * fp = features_str;
features->count = 0;
features->done = 0;
features->lcd_index = -1;
while (*fp) {
char f = *fp++;
switch (f) {
case '0'...'9': /* tft screen */
if (features->done & FEATURE_SCREEN) {
printk(KERN_INFO "MINI2440: '%c' ignored, "
"screen type already set\n", f);
} else {
int li = f - '0';
if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
printk(KERN_INFO "MINI2440: "
"'%c' out of range LCD mode\n", f);
else {
features->optional[features->count++] =
&s3c_device_lcd;
features->lcd_index = li;
}
}
features->done |= FEATURE_SCREEN;
break;
case 'b':
if (features->done & FEATURE_BACKLIGHT)
printk(KERN_INFO "MINI2440: '%c' ignored, "
"backlight already set\n", f);
else {
features->optional[features->count++] =
&mini2440_led_backlight;
}
features->done |= FEATURE_BACKLIGHT;
break;
case 't':
printk(KERN_INFO "MINI2440: '%c' ignored, "
"touchscreen not compiled in\n", f);
break;
case 'c':
if (features->done & FEATURE_CAMERA)
printk(KERN_INFO "MINI2440: '%c' ignored, "
"camera already registered\n", f);
else
features->optional[features->count++] =
&s3c_device_camif;
features->done |= FEATURE_CAMERA;
break;
}
}
}
static void __init mini2440_init(void)
{
struct mini2440_features_t features = { 0 };
int i;
printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
mini2440_features_str);
/* Parse the feature string */
mini2440_parse_features(&features, mini2440_features_str);
/* turn LCD on */
s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
/* Turn the backlight early on */
s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT);
/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
s3c2410_gpio_pullup(S3C2410_GPB(1), 0);
s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
/* Make sure the D+ pullup pin is output */
s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
/* mark the key as input, without pullups (there is one on the board) */
for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0);
s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio,
S3C2410_GPIO_INPUT);
}
if (features.lcd_index != -1) {
int li;
mini2440_fb_info.displays =
&mini2440_lcd_cfg[features.lcd_index];
printk(KERN_INFO "MINI2440: LCD");
for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
if (li == features.lcd_index)
printk(" [%d:%dx%d]", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
else
printk(" %d:%dx%d", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
printk("\n");
s3c24xx_fb_set_platdata(&mini2440_fb_info);
}
s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, mini2440_i2c_devs,
ARRAY_SIZE(mini2440_i2c_devs));
platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
if (features.count) /* the optional features */
platform_add_devices(features.optional, features.count);
}
MACHINE_START(MINI2440, "MINI2440")
/* Maintainer: Michel Pollet <buserror@gmail.com> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
MACHINE_END

12
arch/arm/mach-s3c2442/Kconfig
View File

@ -24,6 +24,18 @@ config SMDK2440_CPU2442
depends on ARCH_S3C2440
select CPU_S3C2442
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
select CPU_S3C2442
select MFD_PCF50633
select PCF50633_GPIO
select I2C
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
endmenu

2
arch/arm/mach-s3c2442/Makefile
View File

@ -12,5 +12,7 @@ obj- :=
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C2442) += clock.o
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
# Machine support

84
arch/arm/mach-s3c2442/include/mach/gta02.h 100644
View File

@ -0,0 +1,84 @@
#ifndef _GTA02_H
#define _GTA02_H
#include <mach/regs-gpio.h>
/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
#define GTA02v1_SYSTEM_REV 0x00000310
#define GTA02v2_SYSTEM_REV 0x00000320
#define GTA02v3_SYSTEM_REV 0x00000330
#define GTA02v4_SYSTEM_REV 0x00000340
#define GTA02v5_SYSTEM_REV 0x00000350
/* since A7 is basically same as A6, we use A6 PCB ID */
#define GTA02v6_SYSTEM_REV 0x00000360
#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
#define GTA02_GPIO_IO1 S3C2410_GPF(1)
#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
#define GTA02_IRQ_MODEM IRQ_EINT1
#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
#define GTA02_IRQ_AUX IRQ_EINT6
#define GTA02_IRQ_nHOLD IRQ_EINT7
#define GTA02_IRQ_PCF50633 IRQ_EINT9
#define GTA02_IRQ_3D IRQ_EINT12
#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
int gta02_get_pcb_revision(void);
#endif /* _GTA02_H */

645
arch/arm/mach-s3c2442/mach-gta02.c 100644
View File

@ -0,0 +1,645 @@
/*
* linux/arch/arm/mach-s3c2442/mach-gta02.c
*
* S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
*
* Copyright (C) 2006-2009 by Openmoko, Inc.
* Authors: Harald Welte <laforge@openmoko.org>
* Andy Green <andy@openmoko.org>
* Werner Almesberger <werner@openmoko.org>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/spi/spi.h>
#include <linux/mmc/host.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/backlight.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/pcf50633/core.h>
#include <linux/mfd/pcf50633/mbc.h>
#include <linux/mfd/pcf50633/adc.h>
#include <linux/mfd/pcf50633/gpio.h>
#include <linux/mfd/pcf50633/pmic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/fb.h>
#include <mach/spi.h>
#include <mach/spi-gpio.h>
#include <plat/usb-control.h>
#include <mach/regs-mem.h>
#include <mach/hardware.h>
#include <mach/gta02.h>
#include <plat/regs-serial.h>
#include <plat/nand.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/udc.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
static struct pcf50633 *gta02_pcf;
/*
* This gets called every 1ms when we paniced.
*/
static long gta02_panic_blink(long count)
{
long delay = 0;
static long last_blink;
static char led;
/* Fast blink: 200ms period. */
if (count - last_blink < 100)
return 0;
led ^= 1;
gpio_direction_output(GTA02_GPIO_AUX_LED, led);
last_blink = count;
return delay;
}
static struct map_desc gta02_iodesc[] __initdata = {
{
.virtual = 0xe0000000,
.pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000),
.length = SZ_1M,
.type = MT_DEVICE
},
};
#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg gta02_uartcfgs[] = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
#ifdef CONFIG_CHARGER_PCF50633
/*
* On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
* We use this to recognize that we can pull 1A from the USB socket.
*
* These constants are the measured pcf50633 ADC levels with the 1A
* charger / 48K resistor, and with no pulldown resistor.
*/
#define ADC_NOM_CHG_DETECT_1A 6
#define ADC_NOM_CHG_DETECT_USB 43
static void
gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
{
int ma;
/* Interpret charger type */
if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
/*
* Sanity - stop GPO driving out now that we have a 1A charger
* GPO controls USB Host power generation on GTA02
*/
pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
ma = 1000;
} else
ma = 100;
pcf50633_mbc_usb_curlim_set(pcf, ma);
}
static struct delayed_work gta02_charger_work;
static int gta02_usb_vbus_draw;
static void gta02_charger_worker(struct work_struct *work)
{
if (gta02_usb_vbus_draw) {
pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
return;
}
#ifdef CONFIG_PCF50633_ADC
pcf50633_adc_async_read(gta02_pcf,
PCF50633_ADCC1_MUX_ADCIN1,
PCF50633_ADCC1_AVERAGE_16,
gta02_configure_pmu_for_charger,
NULL);
#else
/*
* If the PCF50633 ADC is disabled we fallback to a
* 100mA limit for safety.
*/
pcf50633_mbc_usb_curlim_set(pcf, 100);
#endif
}
#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
{
if (irq == PCF50633_IRQ_USBINS) {
schedule_delayed_work(&gta02_charger_work,
GTA02_CHARGER_CONFIGURE_TIMEOUT);
return;
}
if (irq == PCF50633_IRQ_USBREM) {
cancel_delayed_work_sync(&gta02_charger_work);
gta02_usb_vbus_draw = 0;
}
}
static void gta02_udc_vbus_draw(unsigned int ma)
{
if (!gta02_pcf)
return;
gta02_usb_vbus_draw = ma;
schedule_delayed_work(&gta02_charger_work,
GTA02_CHARGER_CONFIGURE_TIMEOUT);
}
#else /* !CONFIG_CHARGER_PCF50633 */
#define gta02_pmu_event_callback NULL
#define gta02_udc_vbus_draw NULL
#endif
/*
* This is called when pc50633 is probed, unfortunately quite late in the
* day since it is an I2C bus device. Here we can belatedly define some
* platform devices with the advantage that we can mark the pcf50633 as the
* parent. This makes them get suspended and resumed with their parent
* the pcf50633 still around.
*/
static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
static char *gta02_batteries[] = {
"battery",
};
struct pcf50633_platform_data gta02_pcf_pdata = {
.resumers = {
[0] = PCF50633_INT1_USBINS |
PCF50633_INT1_USBREM |
PCF50633_INT1_ALARM,
[1] = PCF50633_INT2_ONKEYF,
[2] = PCF50633_INT3_ONKEY1S,
[3] = PCF50633_INT4_LOWSYS |
PCF50633_INT4_LOWBAT |
PCF50633_INT4_HIGHTMP,
},
.batteries = gta02_batteries,
.num_batteries = ARRAY_SIZE(gta02_batteries),
.reg_init_data = {
[PCF50633_REGULATOR_AUTO] = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
.apply_uV = 1,
.state_mem = {
.enabled = 1,
},
},
},
[PCF50633_REGULATOR_DOWN1] = {
.constraints = {
.min_uV = 1300000,
.max_uV = 1600000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
.apply_uV = 1,
},
},
[PCF50633_REGULATOR_DOWN2] = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
},
[PCF50633_REGULATOR_HCLDO] = {
.constraints = {
.min_uV = 2000000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
},
},
[PCF50633_REGULATOR_LDO1] = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
.state_mem = {
.enabled = 0,
},
},
},
[PCF50633_REGULATOR_LDO2] = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
},
},
[PCF50633_REGULATOR_LDO3] = {
.constraints = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
},
},
[PCF50633_REGULATOR_LDO4] = {
.constraints = {
.min_uV = 3200000,
.max_uV = 3200000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
},
},
[PCF50633_REGULATOR_LDO5] = {
.constraints = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
.state_mem = {
.enabled = 1,
},
},
},
[PCF50633_REGULATOR_LDO6] = {
.constraints = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
},
},
[PCF50633_REGULATOR_MEMLDO] = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.state_mem = {
.enabled = 1,
},
},
},
},
.probe_done = gta02_pmu_attach_child_devices,
.mbc_event_callback = gta02_pmu_event_callback,
};
/* NOR Flash. */
#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */
#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
static struct physmap_flash_data gta02_nor_flash_data = {
.width = 2,
};
static struct resource gta02_nor_flash_resource = {
.start = GTA02_FLASH_BASE,
.end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device gta02_nor_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &gta02_nor_flash_data,
},
.resource = &gta02_nor_flash_resource,
.num_resources = 1,
};
struct platform_device s3c24xx_pwm_device = {
.name = "s3c24xx_pwm",
.num_resources = 0,
};
static struct i2c_board_info gta02_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("pcf50633", 0x73),
.irq = GTA02_IRQ_PCF50633,
.platform_data = &gta02_pcf_pdata,
},
{
I2C_BOARD_INFO("wm8753", 0x1a),
},
};
static struct s3c2410_nand_set gta02_nand_sets[] = {
[0] = {
/*
* This name is also hard-coded in the boot loaders, so
* changing it would would require all users to upgrade
* their boot loaders, some of which are stored in a NOR
* that is considered to be immutable.
*/
.name = "neo1973-nand",
.nr_chips = 1,
.flash_bbt = 1,
},
};
/*
* Choose a set of timings derived from S3C@2442B MCP54
* data sheet (K5D2G13ACM-D075 MCP Memory).
*/
static struct s3c2410_platform_nand gta02_nand_info = {
.tacls = 0,
.twrph0 = 25,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(gta02_nand_sets),
.sets = gta02_nand_sets,
};
static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
{
switch (cmd) {
case S3C2410_UDC_P_ENABLE:
pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
break;
case S3C2410_UDC_P_DISABLE:
pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
break;
case S3C2410_UDC_P_RESET:
pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
/* FIXME: Do something here. */
}
}
/* Get PMU to set USB current limit accordingly. */
static struct s3c2410_udc_mach_info gta02_udc_cfg = {
.vbus_draw = gta02_udc_vbus_draw,
.udc_command = gta02_udc_command,
};
static void gta02_bl_set_intensity(int intensity)
{
struct pcf50633 *pcf = gta02_pcf;
int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
/* We map 8-bit intensity to 6-bit intensity in hardware. */
intensity >>= 2;
/*
* This can happen during, eg, print of panic on blanked console,
* but we can't service i2c without interrupts active, so abort.
*/
if (in_atomic()) {
printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
return;
}
old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
if (intensity == old_intensity)
return;
/* We can't do this anywhere else. */
pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
old_intensity = 0;
/*
* The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
* if seen, you have to re-enable the LED unit.
*/
if (!intensity || !old_intensity)
pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
/* Illegal to set LEDOUT to 0. */
if (!intensity)
pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
else
pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
intensity);
if (intensity)
pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
}
static struct generic_bl_info gta02_bl_info = {
.name = "gta02-bl",
.max_intensity = 0xff,
.default_intensity = 0xff,
.set_bl_intensity = gta02_bl_set_intensity,
};
static struct platform_device gta02_bl_dev = {
.name = "generic-bl",
.id = 1,
.dev = {
.platform_data = &gta02_bl_info,
},
};
/* USB */
static struct s3c2410_hcd_info gta02_usb_info = {
.port[0] = {
.flags = S3C_HCDFLG_USED,
},
.port[1] = {
.flags = 0,
},
};
static void __init gta02_map_io(void)
{
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
}
/* These are the guys that don't need to be children of PMU. */
static struct platform_device *gta02_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_sdi,
&s3c_device_usbgadget,
&s3c_device_nand,
&gta02_nor_flash,
&s3c24xx_pwm_device,
&s3c_device_iis,
&s3c_device_i2c0,
};
/* These guys DO need to be children of PMU. */
static struct platform_device *gta02_devices_pmu_children[] = {
&gta02_bl_dev,
};
/*
* This is called when pc50633 is probed, quite late in the day since it is an
* I2C bus device. Here we can define platform devices with the advantage that
* we can mark the pcf50633 as the parent. This makes them get suspended and
* resumed with their parent the pcf50633 still around. All devices whose
* operation depends on something from pcf50633 must have this relationship
* made explicit like this, or suspend and resume will become an unreliable
* hellworld.
*/
static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
{
int n;
/* Grab a copy of the now probed PMU pointer. */
gta02_pcf = pcf;
for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
platform_add_devices(gta02_devices_pmu_children,
ARRAY_SIZE(gta02_devices_pmu_children));
}
static void gta02_poweroff(void)
{
pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
}
static void __init gta02_machine_init(void)
{
/* Set the panic callback to make AUX LED blink at ~5Hz. */
panic_blink = gta02_panic_blink;
s3c_pm_init();
#ifdef CONFIG_CHARGER_PCF50633
INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
#endif
s3c_device_usb.dev.platform_data = &gta02_usb_info;
s3c_device_nand.dev.platform_data = &gta02_nand_info;
s3c24xx_udc_set_platdata(&gta02_udc_cfg);
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
pm_power_off = gta02_poweroff;
}
MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END

137
arch/arm/mm/alignment.c
View File

@ -62,6 +62,12 @@
#define SHIFT_ASR 0x40
#define SHIFT_RORRRX 0x60
#define BAD_INSTR 0xdeadc0de
/* Thumb-2 32 bit format per ARMv7 DDI0406A A6.3, either f800h,e800h,f800h */
#define IS_T32(hi16) \
(((hi16) & 0xe000) == 0xe000 && ((hi16) & 0x1800))
static unsigned long ai_user;
static unsigned long ai_sys;
static unsigned long ai_skipped;
@ -332,38 +338,48 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
struct pt_regs *regs)
{
unsigned int rd = RD_BITS(instr);
unsigned int rd2;
int load;
if (((rd & 1) == 1) || (rd == 14))
if ((instr & 0xfe000000) == 0xe8000000) {
/* ARMv7 Thumb-2 32-bit LDRD/STRD */
rd2 = (instr >> 8) & 0xf;
load = !!(LDST_L_BIT(instr));
} else if (((rd & 1) == 1) || (rd == 14))
goto bad;
else {
load = ((instr & 0xf0) == 0xd0);
rd2 = rd + 1;
}
ai_dword += 1;
if (user_mode(regs))
goto user;
if ((instr & 0xf0) == 0xd0) {
if (load) {
unsigned long val;
get32_unaligned_check(val, addr);
regs->uregs[rd] = val;
get32_unaligned_check(val, addr + 4);
regs->uregs[rd + 1] = val;
regs->uregs[rd2] = val;
} else {
put32_unaligned_check(regs->uregs[rd], addr);
put32_unaligned_check(regs->uregs[rd + 1], addr + 4);
put32_unaligned_check(regs->uregs[rd2], addr + 4);
}
return TYPE_LDST;
user:
if ((instr & 0xf0) == 0xd0) {
if (load) {
unsigned long val;
get32t_unaligned_check(val, addr);
regs->uregs[rd] = val;
get32t_unaligned_check(val, addr + 4);
regs->uregs[rd + 1] = val;
regs->uregs[rd2] = val;
} else {
put32t_unaligned_check(regs->uregs[rd], addr);
put32t_unaligned_check(regs->uregs[rd + 1], addr + 4);
put32t_unaligned_check(regs->uregs[rd2], addr + 4);
}
return TYPE_LDST;
@ -616,10 +632,74 @@ thumb2arm(u16 tinstr)
/* Else fall through for illegal instruction case */
default:
return 0xdeadc0de;
return BAD_INSTR;
}
}
/*
* Convert Thumb-2 32 bit LDM, STM, LDRD, STRD to equivalent instruction
* handlable by ARM alignment handler, also find the corresponding handler,
* so that we can reuse ARM userland alignment fault fixups for Thumb.
*
* @pinstr: original Thumb-2 instruction; returns new handlable instruction
* @regs: register context.
* @poffset: return offset from faulted addr for later writeback
*
* NOTES:
* 1. Comments below refer to ARMv7 DDI0406A Thumb Instruction sections.
* 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt)
*/
static void *
do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
union offset_union *poffset)
{
unsigned long instr = *pinstr;
u16 tinst1 = (instr >> 16) & 0xffff;
u16 tinst2 = instr & 0xffff;
poffset->un = 0;
switch (tinst1 & 0xffe0) {
/* A6.3.5 Load/Store multiple */
case 0xe880: /* STM/STMIA/STMEA,LDM/LDMIA, PUSH/POP T2 */
case 0xe8a0: /* ...above writeback version */
case 0xe900: /* STMDB/STMFD, LDMDB/LDMEA */
case 0xe920: /* ...above writeback version */
/* no need offset decision since handler calculates it */
return do_alignment_ldmstm;
case 0xf840: /* POP/PUSH T3 (single register) */
if (RN_BITS(instr) == 13 && (tinst2 & 0x09ff) == 0x0904) {
u32 L = !!(LDST_L_BIT(instr));
const u32 subset[2] = {
0xe92d0000, /* STMDB sp!,{registers} */
0xe8bd0000, /* LDMIA sp!,{registers} */
};
*pinstr = subset[L] | (1<<RD_BITS(instr));
return do_alignment_ldmstm;
}
/* Else fall through for illegal instruction case */
break;
/* A6.3.6 Load/store double, STRD/LDRD(immed, lit, reg) */
case 0xe860:
case 0xe960:
case 0xe8e0:
case 0xe9e0:
poffset->un = (tinst2 & 0xff) << 2;
case 0xe940:
case 0xe9c0:
return do_alignment_ldrdstrd;
/*
* No need to handle load/store instructions up to word size
* since ARMv6 and later CPUs can perform unaligned accesses.
*/
default:
break;
}
return NULL;
}
static int
do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
@ -630,6 +710,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
mm_segment_t fs;
unsigned int fault;
u16 tinstr = 0;
int isize = 4;
int thumb2_32b = 0;
instrptr = instruction_pointer(regs);
@ -637,8 +719,19 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
set_fs(KERNEL_DS);
if (thumb_mode(regs)) {
fault = __get_user(tinstr, (u16 *)(instrptr & ~1));
if (!(fault))
instr = thumb2arm(tinstr);
if (!fault) {
if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
IS_T32(tinstr)) {
/* Thumb-2 32-bit */
u16 tinst2 = 0;
fault = __get_user(tinst2, (u16 *)(instrptr+2));
instr = (tinstr << 16) | tinst2;
thumb2_32b = 1;
} else {
isize = 2;
instr = thumb2arm(tinstr);
}
}
} else
fault = __get_user(instr, (u32 *)instrptr);
set_fs(fs);
@ -655,7 +748,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
fixup:
regs->ARM_pc += thumb_mode(regs) ? 2 : 4;
regs->ARM_pc += isize;
switch (CODING_BITS(instr)) {
case 0x00000000: /* 3.13.4 load/store instruction extensions */
@ -714,18 +807,25 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
handler = do_alignment_ldrstr;
break;
case 0x08000000: /* ldm or stm */
handler = do_alignment_ldmstm;
case 0x08000000: /* ldm or stm, or thumb-2 32bit instruction */
if (thumb2_32b)
handler = do_alignment_t32_to_handler(&instr, regs, &offset);
else
handler = do_alignment_ldmstm;
break;
default:
goto bad;
}
if (!handler)
goto bad;
type = handler(addr, instr, regs);
if (type == TYPE_ERROR || type == TYPE_FAULT)
if (type == TYPE_ERROR || type == TYPE_FAULT) {
regs->ARM_pc -= isize;
goto bad_or_fault;
}
if (type == TYPE_LDST)
do_alignment_finish_ldst(addr, instr, regs, offset);
@ -735,7 +835,6 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
bad_or_fault:
if (type == TYPE_ERROR)
goto bad;
regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
/*
* We got a fault - fix it up, or die.
*/
@ -751,8 +850,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
*/
printk(KERN_ERR "Alignment trap: not handling instruction "
"%0*lx at [<%08lx>]\n",
thumb_mode(regs) ? 4 : 8,
thumb_mode(regs) ? tinstr : instr, instrptr);
isize << 1,
isize == 2 ? tinstr : instr, instrptr);
ai_skipped += 1;
return 1;
@ -763,8 +862,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
"Address=0x%08lx FSR 0x%03x\n", current->comm,
task_pid_nr(current), instrptr,
thumb_mode(regs) ? 4 : 8,
thumb_mode(regs) ? tinstr : instr,
isize << 1,
isize == 2 ? tinstr : instr,
addr, fsr);
if (ai_usermode & UM_FIXUP)

2
arch/arm/mm/fault.c
View File

@ -208,7 +208,7 @@ good_area:
* than endlessly redo the fault.
*/
survive:
fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, fsr & (1 << 11));
fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0);
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;

7
arch/arm/mm/mmu.c
View File

@ -836,6 +836,13 @@ void __init reserve_node_zero(pg_data_t *pgdat)
BOOTMEM_EXCLUSIVE);
}
if (machine_is_treo680()) {
reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
BOOTMEM_EXCLUSIVE);
reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
BOOTMEM_EXCLUSIVE);
}
if (machine_is_palmt5())
reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
BOOTMEM_EXCLUSIVE);

13
arch/arm/plat-omap/dma.c
View File

@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void)
setup_irq(irq, &omap24xx_dma_irq);
}
/* Enable smartidle idlemodes and autoidle */
if (cpu_is_omap34xx()) {
u32 v = dma_read(OCP_SYSCONFIG);
v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
DMA_SYSCONFIG_SIDLEMODE_MASK |
DMA_SYSCONFIG_AUTOIDLE);
v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
DMA_SYSCONFIG_AUTOIDLE);
dma_write(v , OCP_SYSCONFIG);
}
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,

1
arch/arm/plat-omap/gpio.c
View File

@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void)
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
/* Initialize interface clock ungated, module enabled */
__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);

22
arch/arm/plat-omap/include/mach/cpu.h
View File

@ -30,6 +30,17 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
/*
* Omap device type i.e. EMU/HS/TST/GP/BAD
*/
#define OMAP2_DEVICE_TYPE_TEST 0
#define OMAP2_DEVICE_TYPE_EMU 1
#define OMAP2_DEVICE_TYPE_SEC 2
#define OMAP2_DEVICE_TYPE_GP 3
#define OMAP2_DEVICE_TYPE_BAD 4
int omap_type(void);
struct omap_chip_id {
u8 oc;
u8 type;
@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430)
int omap_chip_is(struct omap_chip_id oci);
int omap_type(void);
/*
* Macro to detect device type i.e. EMU/HS/TST/GP/BAD
*/
#define OMAP2_DEVICE_TYPE_TEST 0
#define OMAP2_DEVICE_TYPE_EMU 1
#define OMAP2_DEVICE_TYPE_SEC 2
#define OMAP2_DEVICE_TYPE_GP 3
#define OMAP2_DEVICE_TYPE_BAD 4
void omap2_check_revision(void);
#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */

15
arch/arm/plat-omap/include/mach/dma.h
View File

@ -389,6 +389,21 @@
#define DMA_THREAD_FIFO_25 (0x02 << 14)
#define DMA_THREAD_FIFO_50 (0x03 << 14)
/* DMA4_OCP_SYSCONFIG bits */
#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12)
#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8)
#define DMA_SYSCONFIG_EMUFREE (1 << 5)
#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3)
#define DMA_SYSCONFIG_SOFTRESET (1 << 2)
#define DMA_SYSCONFIG_AUTOIDLE (1 << 0)
#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12)
#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3)
#define DMA_IDLEMODE_SMARTIDLE 0x2
#define DMA_IDLEMODE_NO_IDLE 0x1
#define DMA_IDLEMODE_FORCE_IDLE 0x0
/* Chaining modes*/
#ifndef CONFIG_ARCH_OMAP1
#define OMAP_DMA_STATIC_CHAIN 0x1

2
arch/arm/plat-omap/include/mach/io.h
View File

@ -201,7 +201,7 @@
#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
#ifdef __ASSEMBLER__
#define IOMEM(x) x
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))

6
arch/arm/plat-omap/include/mach/sram.h
View File

@ -24,7 +24,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2,
u32 unlock_dll);
u32 unlock_dll, u32 f, u32 sdrc_mr,
u32 inc);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@ -62,7 +63,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2,
u32 unlock_dll);
u32 unlock_dll, u32 f, u32 sdrc_mr,
u32 inc);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif

Some files were not shown because too many files have changed in this diff Show More