redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

i.MX arm32 DT changes for 5.3: 

- New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
    Meerkat96 board, and NXP LS1021A-TSN board.
  - A series from Andrey Smirnov to update vf610-zii-dev and
    imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
    adding QSPI device, and dropping unused pinmux.
  - Update imx6sl and imx6qdl device tree to assign corresponding clocks
    instead of dummy clock.
  - Update i.MX6/7 boards from NXP to assign corresponding power supply
    for LDOs.
  - Update i.MX6/7 device trees to enable SNVS poweroff key support
    according to board design.
  - Update coresight DT binding for i.MX7 according to consolidations
    for CoreSight replicator and funnel.
  - A series from Marek Vasut to update M53Menlo board on various devices
    like UART, USB, ethernet PHY, GPIOs etc.
  - Enable USBOTG support for imx7ulp and evk board.
  - A series from Peter Robinson to update imx6sx-udoo board, switching
    to SPDX License Identifier, enabling I2C devices and bluetooth
    support.
  - Add video capture support for i.MX53 and imx53-smd board.
  - Add PXP device for i.MX6UL.
  - Other random small updates on various boards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEbs9AAoJEFBXWFqHsHzOkIoIAKBS9jB7Lp6DSGpYIgwdjBmK
 PY0ogud8FZEfHFdDi9WGt3d1KFkr0xBJPvJ1Tn48BdpN/k3TMrFs1sj/PRNlIRe5
 llnBpCD5oV7SHAdIkFcGIQeWwHMfnpxe1NdhMiCpT6pKtk2oieRWVs0RvdZ5UgRI
 aULSFbxs/ZEjvVa3Jcx7KjFmceCHP8naICtYm7ZYjn3vDI7y1ZosaD9pWFSL3N/k
 l/F3B05Zh6HA4HpldGxCbxSVr94GE9HgLXGigo/nEGjiHmhecc2rievsegJP9AKa
 z1bTtIK+qrsYmUtXWGPgNTXLpVfjRf+0Q6z60uVDhsfuNJx2IVJkyBeAebXCSMk=
 =pBgY
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm32 DT changes for 5.3:
 - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
   Meerkat96 board, and NXP LS1021A-TSN board.
 - A series from Andrey Smirnov to update vf610-zii-dev and
   imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
   adding QSPI device, and dropping unused pinmux.
 - Update imx6sl and imx6qdl device tree to assign corresponding clocks
   instead of dummy clock.
 - Update i.MX6/7 boards from NXP to assign corresponding power supply
   for LDOs.
 - Update i.MX6/7 device trees to enable SNVS poweroff key support
   according to board design.
 - Update coresight DT binding for i.MX7 according to consolidations
   for CoreSight replicator and funnel.
 - A series from Marek Vasut to update M53Menlo board on various devices
   like UART, USB, ethernet PHY, GPIOs etc.
 - Enable USBOTG support for imx7ulp and evk board.
 - A series from Peter Robinson to update imx6sx-udoo board, switching
   to SPDX License Identifier, enabling I2C devices and bluetooth
   support.
 - Add video capture support for i.MX53 and imx53-smd board.
 - Add PXP device for i.MX6UL.
 - Other random small updates on various boards.

* tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits)
  ARM: dts: imx7ulp-evk: enable USBOTG1 support
  ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
  ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support
  ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module
  ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries
  ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path'
  ARM: dts: Add support for 96Boards Meerkat96 board
  ARM: dts: imx6ul: Add PXP node
  ARM: dts: imx6sll: Enable SNVS poweroff according to board design
  ARM: dts: imx7s: Enable SNVS power key according to board design
  ARM: dts: imx6sll: Enable SNVS power key according to board design
  ARM: dts: imx6ul: Enable SNVS power key according to board design
  ARM: dts: imx6sx: Enable SNVS power key according to board design
  ARM: dts: imx6qdl: Enable SNVS power key according to board design
  ARM: dts: imx53: Bind CPLD on M53Menlo
  ARM: dts: Introduce the NXP LS1021A-TSN board
  ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1
  ARM: dts: imx7d: Update cpufreq OPP table
  ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3
  ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
alistair/sunxi64-5.4-dsi
Olof Johansson 2019-06-25 04:52:17 -07:00
parent 9bb03d2644 48cbd9ff53
commit 09253fccca
36 changed files with 2198 additions and 258 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/Makefile
View File

@ -586,6 +586,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
imx7d-mba7.dtb \
imx7d-meerkat96.dtb \
imx7d-nitrogen7.dtb \
imx7d-pico-hobbit.dtb \
imx7d-pico-pi.dtb \
@ -602,6 +603,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-moxa-uc-8410a.dtb \
ls1021a-qds.dtb \
ls1021a-tsn.dtb \
ls1021a-twr.dtb
dtb-$(CONFIG_SOC_VF610) += \
vf500-colibri-eval-v3.dtb \

266
arch/arm/boot/dts/imx53-m53menlo.dts
View File

@ -10,6 +10,25 @@
model = "MENLO M53 EMBEDDED DEVICE";
compatible = "menlo,m53menlo", "fsl,imx53";
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pinctrl_power_button>;
pinctrl-names = "default";
power-button {
label = "Power button";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
};
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pinctrl_power_out>;
pinctrl-names = "default";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -30,7 +49,7 @@
eth {
label = "EthLedYe";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
linux,default-trigger = "netdev";
};
};
@ -45,12 +64,19 @@
};
};
beeper {
compatible = "gpio-beeper";
pinctrl-0 = <&pinctrl_beeper>;
gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
};
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@ -74,6 +100,25 @@
assigned-clock-rates = <133333334>, <33333334>, <33333334>;
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
spidev@0 {
compatible = "menlo,m53cpld";
spi-max-frequency = <25000000>;
reg = <0>;
};
spidev@1 {
compatible = "menlo,m53cpld";
spi-max-frequency = <25000000>;
reg = <1>;
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
@ -86,9 +131,82 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
status = "okay";
};
&gpio1 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio2 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"TestPin_SV2_3", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio3 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
"", "CPLD_JTAG_TDO", "", "";
};
&gpio5 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "CPLD_JTAG_TCK", "KBD_intK",
"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
};
&gpio6 {
gpio-line-names =
"", "", "", "",
"CPLD_reset", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio7 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "USB-OTG_OverCurrent", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@ -136,27 +254,37 @@
imx53-m53evk {
hoggrp {
fsl,pins = <
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
MX53_PAD_EIM_EB3__GPIO2_31 0x1d5
MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5
MX53_PAD_GPIO_19__CCM_CLKO 0x1d5
MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5
MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5
MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5
MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5
MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5
MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5
MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5
MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5
MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5
MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5
MX53_PAD_GPIO_19__CCM_CLKO 0x1e4
MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4
MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4
MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4
MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4
MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4
MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4
MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4
MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4
MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4
MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4
MX53_PAD_EIM_D24__GPIO3_24 0x1e4
MX53_PAD_EIM_D25__GPIO3_25 0x1e4
MX53_PAD_EIM_D29__GPIO3_29 0x1e4
MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4
MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4
MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4
MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5
MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5
MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4
MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4
>;
};
pinctrl_beeper: beepergrp {
fsl,pins = <
MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4
>;
};
@ -169,49 +297,66 @@
pinctrl_can2: can2grp {
fsl,pins = <
MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4
MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4
MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4
>;
};
pinctrl_display_gpio: display-gpiogrp {
fsl,pins = <
MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */
MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */
MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */
MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */
MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */
MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */
>;
};
pinctrl_edt_ft5x06: edt-ft5x06grp {
fsl,pins = <
MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */
MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */
MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */
MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */
MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */
MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4
MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4
MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4
MX53_PAD_EIM_RW__GPIO2_26 0xe4
MX53_PAD_EIM_LBA__GPIO2_27 0xe4
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4
MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4
MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4
MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4
MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4
MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4
MX53_PAD_GPIO_1__GPIO1_1 0x1c4
MX53_PAD_GPIO_9__GPIO1_9 0x1e4
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX53_PAD_FEC_MDC__FEC_MDC 0x4
MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
MX53_PAD_FEC_MDC__FEC_MDC 0x1e4
MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4
MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4
MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
>;
};
@ -240,10 +385,24 @@
>;
};
pinctrl_power_button: powerbutgrp {
fsl,pins = <
MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4
>;
};
pinctrl_power_out: poweroutgrp {
fsl,pins = <
MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4
MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4
>;
};
@ -251,13 +410,25 @@
fsl,pins = <
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4
MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
>;
};
pinctrl_usb: usbgrp {
fsl,pins = <
MX53_PAD_GPIO_2__GPIO1_2 0x1d5
MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5
MX53_PAD_GPIO_2__GPIO1_2 0x1c4
MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4
MX53_PAD_GPIO_4__GPIO1_4 0x1c4
MX53_PAD_GPIO_18__GPIO7_13 0x1c4
>;
};
};
@ -287,12 +458,21 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
@ -301,7 +481,7 @@
pinctrl-0 = <&pinctrl_usb>;
vbus-supply = <&reg_usbh1_vbus>;
phy_type = "utmi";
dr_mode = "peripheral";
dr_mode = "host";
status = "okay";
};

73
arch/arm/boot/dts/imx53-smd.dts
View File

@ -185,6 +185,31 @@
>;
};
pinctrl_ipu_csi0: ipucsi0grp {
fsl,pins = <
MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1c4
MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1c4
MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1c4
MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1c4
MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1c4
MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1c4
MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1c4
MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1c4
MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1e4
MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1e4
MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
>;
};
pinctrl_ov5642: ov5642grp {
fsl,pins = <
MX53_PAD_NANDF_WP_B__GPIO6_9 0x1e4
MX53_PAD_NANDF_RB0__GPIO6_10 0x1e4
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
@ -256,11 +281,47 @@
camera: ov5642@3c {
compatible = "ovti,ov5642";
reg = <0x3c>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov5642>;
assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
<&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
<&clks IMX5_CLK_SSI_EXT1_PODF>;
assigned-clock-rates = <0>, <24000000>;
clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
clock-names = "xclk";
DVDD-supply = <&ldo9_reg>;
AVDD-supply = <&ldo7_reg>;
reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
port {
ov5642_to_ipu_csi0: endpoint {
remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
bus-width = <8>;
hsync-active = <1>;
vsync-active = <1>;
};
};
};
pmic: dialog@48 {
compatible = "dlg,da9053", "dlg,da9052";
reg = <0x48>;
interrupt-parent = <&gpio7>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
regulators {
ldo7_reg: ldo7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
};
ldo9_reg: ldo9 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
};
};
};
};
@ -271,3 +332,15 @@
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&ipu_csi0_from_parallel_sensor {
remote-endpoint = <&ov5642_to_ipu_csi0>;
data-shift = <12>; /* Lines 19:12 used */
hsync-active = <1>;
vsync-active = <1>;
};
&ipu_csi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_csi0>;
};

12
arch/arm/boot/dts/imx53.dtsi
View File

@ -31,6 +31,7 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
ipu0 = &ipu;
mmc0 = &esdhc1;
mmc1 = &esdhc2;
mmc2 = &esdhc3;
@ -71,6 +72,11 @@
ports = <&ipu_di0>, <&ipu_di1>;
};
capture_subsystem {
compatible = "fsl,imx-capture-subsystem";
ports = <&ipu_csi0>, <&ipu_csi1>;
};
tzic: tz-interrupt-controller@fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
@ -158,10 +164,16 @@
ipu_csi0: port@0 {
reg = <0>;
ipu_csi0_from_parallel_sensor: endpoint {
};
};
ipu_csi1: port@1 {
reg = <1>;
ipu_csi1_from_parallel_sensor: endpoint {
};
};
ipu_di0: port@2 {

12
arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi 100644
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
*/
#include "imx6dl.dtsi"
#include "imx6qdl-kontron-samx6i.dtsi"
/ {
model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
};

36
arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi 100644
View File

@ -0,0 +1,36 @@
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
*/
#include "imx6q.dtsi"
#include "imx6qdl-kontron-samx6i.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Kontron SMARC sAMX6i Quad/Dual";
compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
};
/* Quad/Dual SoMs have 3 chip-select signals */
&ecspi4 {
fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
<&gpio3 29 GPIO_ACTIVE_HIGH>,
<&gpio3 25 GPIO_ACTIVE_HIGH>;
};
&pinctrl_ecspi4 {
fsl,pins = <
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
/* SPI4_IMX_CS2# - connected to internal flash */
MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
/* SPI4_CS3# - connected to SMARC SPI0_CS1# */
MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
>;
};

815
arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi 100644
View File

@ -0,0 +1,815 @@
// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright 2017 (C) Priit Laes <plaes@plaes.org>
* Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de>
* Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
*
* Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru>
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
reg_1p0v_s0: regulator-1p0v-s0 {
compatible = "regulator-fixed";
regulator-name = "V_1V0_S0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&reg_smarc_suppy>;
};
reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 {
compatible = "regulator-fixed";
regulator-name = "V_1V35_VCOREDIG_S5";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&reg_3p3v_s5>;
};
reg_1p8v_s5: regulator-1p8v-s5 {
compatible = "regulator-fixed";
regulator-name = "V_1V8_S5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&reg_3p3v_s5>;
};
reg_3p3v_s0: regulator-3p3v-s0 {
compatible = "regulator-fixed";
regulator-name = "V_3V3_S0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&reg_3p3v_s5>;
};
reg_3p3v_s0: regulator-3p3v-s0 {
compatible = "regulator-fixed";
regulator-name = "V_3V3_S0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&reg_3p3v_s5>;
};
reg_3p3v_s5: regulator-3p3v-s5 {
compatible = "regulator-fixed";
regulator-name = "V_3V3_S5";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&reg_smarc_suppy>;
};
reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdbklt_en>;
regulator-name = "LCD_BKLT_EN";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_smarc_lcdvdd: regulator-smarc-lcdvdd {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdvdd_en>;
regulator-name = "LCD_VDD_EN";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_smarc_rtc: regulator-smarc-rtc {
compatible = "regulator-fixed";
regulator-name = "V_IN_RTC_BATT";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
/* Module supply range can be 3.00V ... 5.25V */
reg_smarc_suppy: regulator-smarc-supply {
compatible = "regulator-fixed";
regulator-name = "V_IN_WIDE";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
lcd: lcd {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd>;
status = "disabled";
port@0 {
reg = <0>;
lcd_in: endpoint {
};
};
port@1 {
reg = <1>;
lcd_out: endpoint {
};
};
};
lcd_backlight: lcd-backlight {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
pwm-names = "LCD_BKLT_PWM";
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <4>;
power-supply = <&reg_smarc_lcdbklt>;
status = "disabled";
};
i2c_intern: i2c-gpio-intern {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
};
i2c_lcd: i2c-gpio-lcd {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabld";
};
i2c_cam: i2c-gpio-cam {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabld";
};
};
/* I2S0, I2S1 */
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
audmux_ssi1 {
fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) |
IMX_AUDMUX_V2_PTCR_SYN |
IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TCLKDIR)
IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3)
>;
};
audmux_adu3 {
fsl,audmux-port = <MX51_AUDMUX_PORT3>;
fsl,port-config = <
IMX_AUDMUX_V2_PTCR_SYN
IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
>;
};
audmux_ssi2 {
fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
fsl,port-config = <
(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
IMX_AUDMUX_V2_PTCR_SYN |
IMX_AUDMUX_V2_PTCR_TFSDIR |
IMX_AUDMUX_V2_PTCR_TCLKDIR)
IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
>;
};
audmux_adu4 {
fsl,audmux-port = <MX51_AUDMUX_PORT4>;
fsl,port-config = <
IMX_AUDMUX_V2_PTCR_SYN
IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1)
>;
};
};
/* CAN0 */
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
};
/* CAN1 */
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
};
/* SPI1 */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>,
<&gpio2 27 GPIO_ACTIVE_HIGH>;
};
/* SPI0 */
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
<&gpio3 29 GPIO_ACTIVE_HIGH>;
status = "okay";
/* default boot source: workaround #1 for errata ERR006282 */
smarc_flash: spi-flash@0 {
compatible = "winbond,w25q16dw", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
};
};
/* GBE */
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
};
&i2c_intern {
pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
regulators {
reg_v_core_s0: sw1ab {
regulator-name = "V_CORE_S0";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
};
reg_vddsoc_s0: sw1c {
regulator-name = "V_VDDSOC_S0";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p15v_s0: sw2 {
regulator-name = "V_3V15_S0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
/* sw3a/b is used in dual mode, but driver does not
* support it. Although, there's no need to control
* DDR power - so just leaving dummy entries for sw3a
* and sw3b for now.
*/
sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
reg_1p8v_s0: sw4 {
regulator-name = "V_1V8_S0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
/* Regulator for USB */
reg_5p0v_s0: swbst {
regulator-name = "V_5V0_S0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
regulator-boot-on;
};
reg_vsnvs: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
reg_vrefddr: vrefddr {
regulator-boot-on;
regulator-always-on;
};
/*
* Per schematics, of all VGEN's, only VGEN5 has some
* usage ... but even that - over DNI resistor
*/
vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
reg_2p5v_s0: vgen5 {
regulator-name = "V_2V5_S0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
};
/* I2C_GP */
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
};
/* HDMI_CTRL */
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
};
/* I2C_PM */
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
smarc_eeprom: eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>;
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
/* AUDIO MCLK */
MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x000b0
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 /* CS0 */
MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */
>;
};
pinctrl_ecspi4: ecspi4grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
/* SPI_IMX_CS2# - connected to internal flash */
MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
>;
};
pinctrl_gpio: gpiogrp {
fsl,pins = <
MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 /* GPIO0 / CAM0_PWR# */
MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b0 /* GPIO1 / CAM1_PWR# */
MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b0 /* GPIO2 / CAM0_RST# */
MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b0 /* GPIO3 / CAM1_RST# */
MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b0 /* GPIO4 / HDA_RST# */
MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b0 /* GPIO5 / PWM_OUT */
MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b0 /* GPIO6 / TACHIN */
MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 /* GPIO7 / PCAM_FLD */
MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b0 /* GPIO8 / CAN0_ERR# */
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b0 /* GPIO9 / CAN1_ERR# */
MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b0 /* GPIO10 */
MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b0 /* GPIO11 */
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */
>;
};
pinctrl_i2c_gpio_cam: i2c-gpiocamgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* SCL */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* SDA */
>;
};
pinctrl_i2c_gpio_intern: i2c-gpiointerngrp {
fsl,pins = <
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* SCL */
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */
>;
};
pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */
MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_lcd: lcdgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f1
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f1
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f1
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f1
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f1
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f1
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f1
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f1
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f1
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f1
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f1 /* DE */
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f1 /* HSYNC */
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f1 /* VSYNC */
>;
};
pinctrl_lcdbklt_en: lcdbkltengrp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b1
>;
};
pinctrl_lcdvdd_en: lcdvddengrp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
>;
};
pinctrl_mipi_csi: mipi-csigrp {
fsl,pins = <
MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x000b0 /* CSI0/1 MCLK */
>;
};
pinctrl_mgmt_gpios: mgmt-gpiosgrp {
fsl,pins = <
MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 /* LID# */
MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x1b0b0 /* SLEEP# */
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* CHARGING# */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CHARGER_PRSNT# */
MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 /* CARRIER_STBY# */
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* BATLOW# */
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 /* TEST# */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 /* VDD_IO_SEL_D# */
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* POWER_BTN# */
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 /* PCI_A_PRSNT# */
MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A# */
MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE# */
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0
/* power, oc muxed but not used by the driver */
MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 /* USB power */
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 /* USB OC */
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
pinctrl_wdog1: wdog1rp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
>;
};
};
&mipi_csi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mipi_csi>;
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
};
/* LCD_BKLT_PWM */
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
};
&reg_arm {
vin-supply = <&reg_v_core_s0>;
};
&reg_pu {
vin-supply = <&reg_vddsoc_s0>;
};
&reg_soc {
vin-supply = <&reg_vddsoc_s0>;
};
/* SER0 */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
};
/* SER1 */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
};
/* SER2 */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
uart-has-rtscts;
};
/* SER3 */
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
};
/* USB0 */
&usbotg {
/*
* no 'imx6-usb-charger-detection'
* since USB_OTG_CHD_B pin is not wired
*/
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
};
/* USB1/2 via hub */
&usbh1 {
vbus-supply = <&reg_5p0v_s0>;
};
/* SDIO */
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
no-1-8-v;
};
/* SDMMC */
&usdhc4 {
/* Internal eMMC, optional on some boards */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
no-sdio;
no-sd;
non-removable;
vmmc-supply = <&reg_3p3v_s0>;
vqmmc-supply = <&reg_1p8v_s0>;
};
&wdog1 {
/* CPLD is feeded by watchdog (hardwired) */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog1>;
status = "okay";
};

16
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View File

@ -745,10 +745,26 @@
vin-supply = <&sw1c_reg>;
};
&reg_vdd1p1 {
vin-supply = <&vgen5_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen5_reg>;
};
&snvs_poweroff {
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
&ssi2 {
status = "okay";
};

11
arch/arm/boot/dts/imx6qdl.dtsi
View File

@ -675,14 +675,14 @@
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_DUMMY>;
clocks = <&clks IMX6QDL_CLK_IPG>;
};
wdog2: wdog@20c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_DUMMY>;
clocks = <&clks IMX6QDL_CLK_IPG>;
status = "disabled";
};
@ -701,7 +701,7 @@
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1 {
reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@ -716,7 +716,7 @@
anatop-enable-bit = <0>;
};
regulator-3p0 {
reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@ -731,7 +731,7 @@
anatop-enable-bit = <0>;
};
regulator-2p5 {
reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
@ -841,6 +841,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
snvs_lpgpr: snvs-lpgpr {

12
arch/arm/boot/dts/imx6sl-evk.dts
View File

@ -580,6 +580,18 @@
status = "okay";
};
&reg_vdd1p1 {
vin-supply = <&sw2_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&sw2_reg>;
};
&snvs_poweroff {
status = "okay";
};

12
arch/arm/boot/dts/imx6sl.dtsi
View File

@ -495,7 +495,7 @@
compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
clocks = <&clks IMX6SL_CLK_IPG>;
status = "disabled";
};
@ -503,14 +503,14 @@
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
clocks = <&clks IMX6SL_CLK_IPG>;
};
wdog2: wdog@20c0000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
clocks = <&clks IMX6SL_CLK_IPG>;
status = "disabled";
};
@ -531,7 +531,7 @@
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1 {
reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@ -546,7 +546,7 @@
anatop-enable-bit = <0>;
};
regulator-3p0 {
reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@ -561,7 +561,7 @@
anatop-enable-bit = <0>;
};
regulator-2p5 {
reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;

12
arch/arm/boot/dts/imx6sll-evk.dts
View File

@ -265,6 +265,18 @@
status = "okay";
};
&reg_3p0 {
vin-supply = <&sw2_reg>;
};
&snvs_poweroff {
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;

2
arch/arm/boot/dts/imx6sll.dtsi
View File

@ -568,6 +568,7 @@
regmap = <&snvs>;
offset = <0x38>;
mask = <0x61>;
status = "disabled";
};
snvs_pwrkey: snvs-powerkey {
@ -576,6 +577,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
};

16
arch/arm/boot/dts/imx6sx-sdb-reva.dts
View File

@ -154,3 +154,19 @@
enable-active-high;
vin-supply = <&reg_can_en>;
};
&reg_vdd1p1 {
vin-supply = <&vgen6_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};
&snvs_pwrkey {
status = "okay";
};

16
arch/arm/boot/dts/imx6sx-sdb.dts
View File

@ -137,7 +137,23 @@
vin-supply = <&sw1a_reg>;
};
&reg_vdd1p1 {
vin-supply = <&vgen6_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};
&reg_can_stby {
/* Transceiver EN/STBY is active low on RevB board */
gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
};
&snvs_pwrkey {
status = "okay";
};

39
arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
View File

@ -1,43 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;

47
arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
View File

@ -1,43 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@ -53,3 +16,11 @@
reg = <0x80000000 0x40000000>;
};
};
&i2c4 { /* Onboard Motion sensors */
status = "okay";
};
&uart3 { /* Bluetooth */
status = "okay";
};

47
arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
View File

@ -1,43 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@ -68,3 +31,11 @@
};
};
};
&i2c4 { /* Onboard Motion sensors */
status = "okay";
};
&uart3 { /* Bluetooth */
status = "okay";
};

89
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
View File

@ -1,43 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6sx.dtsi"
@ -107,18 +70,6 @@
startup-delay-us = <70000>;
enable-active-high;
};
reg_bt: regulator-bt {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bt_reg>;
enable-active-high;
gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
regulator-name = "bt_reg";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
};
&fec1 {
@ -225,6 +176,20 @@
};
};
&i2c2 { /* Brick snap in sensors connector */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
};
&i2c4 { /* Onboard Motion sensors */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clock-frequency = <100000>;
status = "disabled";
};
&iomuxc {
pinctrl_bt_reg: btreggrp {
fsl,pins =
@ -256,6 +221,18 @@
<MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>,
<MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins =
<MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
<MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
};
pinctrl_uart1: uart1grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>,
@ -354,11 +331,19 @@
status = "disabled";
};
&uart3 { /* Bluetooth */
&uart3 { /* Bluetooth - only on Extended/Full versions */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
uart-has-rtscts;
status = "okay";
status = "disabled";
bluetooth {
compatible = "ti,wl1831-st";
enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bt_reg>;
max-speed = <921600>;
};
};
/* Arduino serial */

7
arch/arm/boot/dts/imx6sx.dtsi
View File

@ -600,7 +600,7 @@
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1 {
reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@ -615,7 +615,7 @@
anatop-enable-bit = <0>;
};
regulator-3p0 {
reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@ -630,7 +630,7 @@
anatop-enable-bit = <0>;
};
regulator-2p5 {
reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
@ -738,6 +738,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
};

4
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
View File

@ -238,6 +238,10 @@
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;

2
arch/arm/boot/dts/imx6ul-geam.dts
View File

@ -169,7 +169,7 @@
display = <&display0>;
status = "okay";
display0: display {
display0: display0 {
bits-per-pixel = <16>;
bus-width = <18>;

2
arch/arm/boot/dts/imx6ul-isiot.dtsi
View File

@ -161,7 +161,7 @@
display = <&display0>;
status = "okay";
display0: display {
display0: display0 {
bits-per-pixel = <16>;
bus-width = <18>;

14
arch/arm/boot/dts/imx6ul.dtsi
View File

@ -59,6 +59,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
clock-frequency = <696000000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
operating-points = <
@ -649,6 +650,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
snvs_lpgpr: snvs-lpgpr {
@ -856,6 +858,8 @@
<&clks IMX6UL_CLK_USDHC1>,
<&clks IMX6UL_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-step= <2>;
fsl,tuning-start-tap = <20>;
bus-width = <4>;
status = "disabled";
};
@ -869,6 +873,8 @@
<&clks IMX6UL_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-step= <2>;
fsl,tuning-start-tap = <20>;
status = "disabled";
};
@ -962,6 +968,14 @@
status = "disabled";
};
pxp: pxp@21cc000 {
compatible = "fsl,imx6ul-pxp";
reg = <0x021cc000 0x4000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PXP>;
clock-names = "axi";
};
qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;

11
arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
View File

@ -145,13 +145,20 @@
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
no-1-8-v;
pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
disable-wp;
wakeup-source;
keep-power-in-suspend;
vmmc-supply = <&reg_3v3>;
vqmmc-supply = <&reg_sd1_vmmc>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};

6
arch/arm/boot/dts/imx6ull-colibri.dtsi
View File

@ -545,6 +545,12 @@
>;
};
pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0
>;
};
pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
fsl,pins = <
MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14

7
arch/arm/boot/dts/imx6ull.dtsi
View File

@ -12,6 +12,7 @@
/delete-node/ &crypto;
&cpu0 {
clock-frequency = <900000000>;
operating-points = <
/* kHz uV */
900000 1275000
@ -34,6 +35,12 @@
compatible = "fsl,imx6ull-ocotp", "syscon";
};
&pxp {
compatible = "fsl,imx6ull-pxp";
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
};
&usdhc1 {
compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
};

375
arch/arm/boot/dts/imx7d-meerkat96.dts 100644
View File

@ -0,0 +1,375 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Copyright (C) 2019 Linaro Ltd.
*/
/dts-v1/;
#include "imx7d.dtsi"
/ {
model = "96Boards Meerkat96 Board";
compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
chosen {
stdout-path = &uart6;
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512MB */
};
reg_wlreg_on: regulator-wlreg-on {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlreg_on>;
regulator-name = "wlreg_on";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100>;
gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led1 {
label = "green:user1";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led2 {
label = "green:user2";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led3 {
label = "green:user3";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc1";
default-state = "off";
};
led4 {
label = "green:user4";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
default-state = "off";
panic-indicator;
};
led5 {
label = "yellow:wlan";
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
led6 {
label = "blue:bt";
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
};
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
uart-has-rtscts;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart6>;
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>;
assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
uart-has-rtscts;
fsl,dte-mode;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
};
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usb_otg2_vbus>;
dr_mode = "host";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
keep-power-in-suspend;
tuning-step = <2>;
vmmc-supply = <&reg_3p3v>;
no-1-8-v;
broken-cd;
status = "okay";
};
&usdhc3 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
no-1-8-v;
no-mmc;
non-removable;
keep-power-in-suspend;
wakeup-source;
vmmc-supply = <&reg_wlreg_on>;
vqmmc-supply =<&reg_3p3v>;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_irq>;
interrupt-parent = <&gpio6>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
};
};
&iomuxc {
pinctrl_bt_gpios: btgpiosgrp {
fsl,pins = <
MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x59
MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x1f
>;
};
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59
MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x59
MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59
MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59
MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x4000007f
MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x4000007f
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
>;
};
pinctrl_lcdif: lcdifgrp {
fsl,pins = <
MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
MX7D_PAD_LCD_CLK__LCD_CLK 0x79
MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
MX7D_PAD_LCD_RESET__LCD_RESET 0x79
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x79
MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x79
MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x79
MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x79
>;
};
pinctrl_uart6: uart6grp {
fsl,pins = <
MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x79
MX7D_PAD_SD1_WP__UART6_DCE_TX 0x79
>;
};
pinctrl_uart7: uart7grp {
fsl,pins = <
MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x79
MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x79
MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x79
MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x79
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
MX7D_PAD_SD3_CLK__SD3_CLK 0x0D
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
>;
};
pinctrl_wlan_irq: wlanirqgrp {
fsl,pins = <
MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x19
>;
};
pinctrl_wlreg_on: wlregongrp {
fsl,pins = <
MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x19
>;
};
};

16
arch/arm/boot/dts/imx7d-sdb.dts
View File

@ -263,8 +263,8 @@
};
sw2_reg: sw2 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1850000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
@ -379,6 +379,18 @@
status = "okay";
};
&reg_1p0d {
vin-supply = <&sw2_reg>;
};
&reg_1p2 {
vin-supply = <&sw2_reg>;
};
&snvs_pwrkey {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;

16
arch/arm/boot/dts/imx7d-zii-rpu2.dts
View File

@ -16,7 +16,7 @@
compatible = "zii,imx7d-rpu2", "fsl,imx7d";
chosen {
stdout-path = &uart1;
stdout-path = &uart2;
};
cs2000_ref: oscillator {
@ -775,13 +775,6 @@
>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f
MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
@ -789,13 +782,6 @@
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f
MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f

16
arch/arm/boot/dts/imx7d.dtsi
View File

@ -12,6 +12,8 @@
clock-frequency = <996000000>;
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
};
cpu1: cpu@1 {
@ -39,15 +41,23 @@
opp-792000000 {
opp-hz = /bits/ 64 <792000000>;
opp-microvolt = <975000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
opp-supported-hw = <0xf>, <0xf>;
};
opp-996000000 {
opp-hz = /bits/ 64 <996000000>;
opp-microvolt = <1075000>;
opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
opp-suspend;
opp-supported-hw = <0xc>, <0xf>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1225000>;
clock-latency-ns = <150000>;
opp-supported-hw = <0x8>, <0xf>;
};
};

11
arch/arm/boot/dts/imx7s.dtsi
View File

@ -117,7 +117,7 @@
* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell"
*/
compatible = "arm,coresight-replicator";
compatible = "arm,coresight-static-replicator";
out-ports {
#address-cells = <1>;
@ -175,7 +175,7 @@
ranges;
funnel@30041000 {
compatible = "arm,coresight-funnel", "arm,primecell";
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x30041000 0x1000>;
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
@ -217,7 +217,7 @@
};
funnel@30083000 {
compatible = "arm,coresight-funnel", "arm,primecell";
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x30083000 0x1000>;
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
@ -551,6 +551,10 @@
tempmon_temp_grade: temp-grade@10 {
reg = <0x10 0x4>;
};
cpu_speed_grade: speed-grade@10 {
reg = <0x10 0x4>;
};
};
anatop: anatop@30360000 {
@ -609,6 +613,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
};

55
arch/arm/boot/dts/imx7ulp-evk.dts
View File

@ -22,6 +22,25 @@
reg = <0x60000000 0x40000000>;
};
backlight {
compatible = "pwm-backlight";
pwms = <&tpm4 1 50000 0>;
brightness-levels = <0 20 25 30 35 40 100>;
default-brightness-level = <6>;
status = "okay";
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_vsd_3v3: regulator-vsd-3v3 {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
@ -40,6 +59,23 @@
status = "okay";
};
&tpm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_id>;
srp-disable;
hnp-disable;
adp-disable;
over-current-active-low;
status = "okay";
};
&usdhc0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc0>;
@ -57,6 +93,25 @@
bias-pull-up;
};
pinctrl_pwm0: pwm0grp {
fsl,pins = <
IMX7ULP_PAD_PTF2__TPM4_CH1 0x2
>;
};
pinctrl_usbotg1_vbus: otg1vbusgrp {
fsl,pins = <
IMX7ULP_PAD_PTC0__PTC0 0x20000
>;
};
pinctrl_usbotg1_id: otg1idgrp {
fsl,pins = <
IMX7ULP_PAD_PTC13__USB0_ID 0x10003
IMX7ULP_PAD_PTC16__USB1_OC2 0x10003
>;
};
pinctrl_usdhc0: usdhc0grp {
fsl,pins = <
IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43

38
arch/arm/boot/dts/imx7ulp.dtsi
View File

@ -30,6 +30,7 @@
serial1 = &lpuart5;
serial2 = &lpuart6;
serial3 = &lpuart7;
usbphy0 = &usbphy1;
};
cpus {
@ -124,6 +125,16 @@
status = "disabled";
};
tpm4: pwm@40250000 {
compatible = "fsl,imx7ulp-pwm";
reg = <0x40250000 0x1000>;
assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
#pwm-cells = <3>;
status = "disabled";
};
tpm5: tpm@40260000 {
compatible = "fsl,imx7ulp-tpm";
reg = <0x40260000 0x1000>;
@ -133,6 +144,33 @@
clock-names = "ipg", "per";
};
usbotg1: usb@40330000 {
compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
reg = <0x40330000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc2 IMX7ULP_CLK_USB0>;
phys = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x8>;
rx-burst-size-dword = <0x8>;
status = "disabled";
};
usbmisc1: usbmisc@40330200 {
compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
#index-cells = <1>;
reg = <0x40330200 0x200>;
};
usbphy1: usb-phy@0x40350000 {
compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
reg = <0x40350000 0x1000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
#phy-cells = <0>;
};
usdhc0: mmc@40370000 {
compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
reg = <0x40370000 0x10000>;

289
arch/arm/boot/dts/ls1021a-tsn.dts 100644
View File

@ -0,0 +1,289 @@
// SPDX-License-Identifier: GPL-2.0
/* Copyright 2016-2018 NXP Semiconductors
* Copyright 2019 Vladimir Oltean <olteanv@gmail.com>
*/
/dts-v1/;
#include "ls1021a.dtsi"
/ {
model = "NXP LS1021A-TSN Board";
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
reg_vdda_codec: regulator-3V3 {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_codec: regulator-2V5 {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
};
&dspi0 {
bus-num = <0>;
status = "okay";
/* ADG704BRMZ 1:4 SPI mux/demux */
sja1105: ethernet-switch@1 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "nxp,sja1105t";
/* 12 MHz */
spi-max-frequency = <12000000>;
/* Sample data on trailing clock edge */
spi-cpha;
/* SPI controller settings for SJA1105 timing requirements */
fsl,spi-cs-sck-delay = <1000>;
fsl,spi-sck-cs-delay = <1000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
/* ETH5 written on chassis */
label = "swp5";
phy-handle = <&rgmii_phy6>;
phy-mode = "rgmii-id";
reg = <0>;
};
port@1 {
/* ETH2 written on chassis */
label = "swp2";
phy-handle = <&rgmii_phy3>;
phy-mode = "rgmii-id";
reg = <1>;
};
port@2 {
/* ETH3 written on chassis */
label = "swp3";
phy-handle = <&rgmii_phy4>;
phy-mode = "rgmii-id";
reg = <2>;
};
port@3 {
/* ETH4 written on chassis */
label = "swp4";
phy-handle = <&rgmii_phy5>;
phy-mode = "rgmii-id";
reg = <3>;
};
port@4 {
/* Internal port connected to eth2 */
ethernet = <&enet2>;
phy-mode = "rgmii";
reg = <4>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
&enet0 {
tbi-handle = <&tbi0>;
phy-handle = <&sgmii_phy2>;
phy-mode = "sgmii";
status = "okay";
};
&enet1 {
tbi-handle = <&tbi1>;
phy-handle = <&sgmii_phy1>;
phy-mode = "sgmii";
status = "okay";
};
/* RGMII delays added via PCB traces */
&enet2 {
phy-mode = "rgmii";
status = "okay";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&esdhc {
status = "okay";
};
&i2c0 {
status = "okay";
/* 3 axis accelerometer */
accelerometer@1e {
compatible = "fsl,fxls8471";
position = <0>;
reg = <0x1e>;
};
/* Audio codec (SAI2) */
audio-codec@2a {
compatible = "fsl,sgtl5000";
VDDIO-supply = <&reg_vddio_codec>;
VDDA-supply = <&reg_vdda_codec>;
#sound-dai-cells = <0>;
clocks = <&sys_mclk>;
reg = <0x2a>;
};
/* Current sensing circuit for 1V VDDCORE PMIC rail */
current-sensor@44 {
compatible = "ti,ina220";
shunt-resistor = <1000>;
reg = <0x44>;
};
/* Current sensing circuit for 12V VCC rail */
current-sensor@45 {
compatible = "ti,ina220";
shunt-resistor = <1000>;
reg = <0x45>;
};
/* Thermal monitor - case */
temperature-sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
};
/* Thermal monitor - chip */
temperature-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
};
eeprom@51 {
compatible = "atmel,24c32";
reg = <0x51>;
};
/* Unsupported devices:
* - FXAS21002C Gyroscope at 0x20
* - TI ADS7924 4-channel ADC at 0x49
*/
};
&ifc {
status = "disabled";
};
&lpuart0 {
status = "okay";
};
&lpuart3 {
status = "okay";
};
&mdio0 {
/* AR8031 */
sgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
/* AR8031 */
sgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
/* BCM5464 quad PHY */
rgmii_phy3: ethernet-phy@3 {
reg = <0x3>;
};
rgmii_phy4: ethernet-phy@4 {
reg = <0x4>;
};
rgmii_phy5: ethernet-phy@5 {
reg = <0x5>;
};
rgmii_phy6: ethernet-phy@6 {
reg = <0x6>;
};
/* SGMII PCS for enet0 */
tbi0: tbi-phy@1f {
reg = <0x1f>;
device_type = "tbi-phy";
};
};
&mdio1 {
/* SGMII PCS for enet1 */
tbi1: tbi-phy@1f {
reg = <0x1f>;
device_type = "tbi-phy";
};
};
&qspi {
status = "okay";
flash@0 {
/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
spi-max-frequency = <20000000>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "RCW";
reg = <0x0 0x40000>;
};
partition@40000 {
label = "U-Boot";
reg = <0x40000 0x300000>;
};
partition@340000 {
label = "U-Boot Env";
reg = <0x340000 0x100000>;
};
};
};
};
&sai2 {
status = "okay";
};
&sata {
status = "okay";
};
&uart0 {
status = "okay";
};

52
arch/arm/boot/dts/vf610-zii-dev.dtsi
View File

@ -177,6 +177,36 @@
status = "okay";
};
&qspi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi0>;
status = "okay";
/*
* Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
* modes, so, spi-max-frequency is limited to 90MHz
*/
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <90000000>;
spi-rx-bus-width = <4>;
reg = <0>;
m25p,fast-read;
};
flash@2 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <90000000>;
spi-rx-bus-width = <4>;
reg = <2>;
m25p,fast-read;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
@ -360,12 +390,18 @@
pinctrl_qspi0: qspi0grp {
fsl,pins = <
VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2
VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2
VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3
VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3
VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3
VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3
VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2
VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2
VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3
VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3
VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3
VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3
>;
};
@ -385,8 +421,8 @@
pinctrl_uart2: uart2grp {
fsl,pins = <
VF610_PAD_PTD0__UART2_TX 0x21a2
VF610_PAD_PTD1__UART2_RX 0x21a1
VF610_PAD_PTD23__UART2_TX 0x21a2
VF610_PAD_PTD22__UART2_RX 0x21a1
>;
};