clk: actions: Add Actions Semi Owl SoCs Reset Management Unit support

Add Reset Management Unit (RMU) support for Actions Semi Owl SoCs.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

drivers/clk/actions/Kconfig

@@ -2,6 +2,7 @@ config CLK_ACTIONS
 	bool "Clock driver for Actions Semi SoCs"
 	depends on ARCH_ACTIONS || COMPILE_TEST
 	select REGMAP_MMIO
+	select RESET_CONTROLLER
 	default ARCH_ACTIONS
 
 if CLK_ACTIONS

drivers/clk/actions/Makefile

@@ -7,6 +7,7 @@ clk-owl-y			+= owl-divider.o
 clk-owl-y			+= owl-factor.o
 clk-owl-y			+= owl-composite.o
 clk-owl-y			+= owl-pll.o
+clk-owl-y			+= owl-reset.o
 
 # SoC support
 obj-$(CONFIG_CLK_OWL_S700)	+= owl-s700.o

drivers/clk/actions/owl-common.h

@@ -26,6 +26,8 @@ struct owl_clk_desc {
 	struct owl_clk_common		**clks;
 	unsigned long			num_clks;
 	struct clk_hw_onecell_data	*hw_clks;
+	const struct owl_reset_map	*resets;
+	unsigned long			num_resets;
 	struct regmap			*regmap;
 };
 

drivers/clk/actions/owl-reset.c

@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Actions Semi Owl SoCs Reset Management Unit driver
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include "owl-reset.h"
+
+static int owl_reset_assert(struct reset_controller_dev *rcdev,
+			    unsigned long id)
+{
+	struct owl_reset *reset = to_owl_reset(rcdev);
+	const struct owl_reset_map *map = &reset->reset_map[id];
+
+	return regmap_update_bits(reset->regmap, map->reg, map->bit, 0);
+}
+
+static int owl_reset_deassert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct owl_reset *reset = to_owl_reset(rcdev);
+	const struct owl_reset_map *map = &reset->reset_map[id];
+
+	return regmap_update_bits(reset->regmap, map->reg, map->bit, map->bit);
+}
+
+static int owl_reset_reset(struct reset_controller_dev *rcdev,
+			   unsigned long id)
+{
+	owl_reset_assert(rcdev, id);
+	udelay(1);
+	owl_reset_deassert(rcdev, id);
+
+	return 0;
+}
+
+static int owl_reset_status(struct reset_controller_dev *rcdev,
+			    unsigned long id)
+{
+	struct owl_reset *reset = to_owl_reset(rcdev);
+	const struct owl_reset_map *map = &reset->reset_map[id];
+	u32 reg;
+	int ret;
+
+	ret = regmap_read(reset->regmap, map->reg, &reg);
+	if (ret)
+		return ret;
+
+	/*
+	 * The reset control API expects 0 if reset is not asserted,
+	 * which is the opposite of what our hardware uses.
+	 */
+	return !(map->bit & reg);
+}
+
+const struct reset_control_ops owl_reset_ops = {
+	.assert		= owl_reset_assert,
+	.deassert	= owl_reset_deassert,
+	.reset		= owl_reset_reset,
+	.status		= owl_reset_status,
+};

drivers/clk/actions/owl-reset.h

@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Actions Semi Owl SoCs Reset Management Unit driver
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#ifndef _OWL_RESET_H_
+#define _OWL_RESET_H_
+
+#include <linux/reset-controller.h>
+
+struct owl_reset_map {
+	u32	reg;
+	u32	bit;
+};
+
+struct owl_reset {
+	struct reset_controller_dev	rcdev;
+	const struct owl_reset_map	*reset_map;
+	struct regmap			*regmap;
+};
+
+static inline struct owl_reset *to_owl_reset(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct owl_reset, rcdev);
+}
+
+extern const struct reset_control_ops owl_reset_ops;
+
+#endif /* _OWL_RESET_H_ */