pinctrl: palmas: add pincontrol driver
TI Palmas series Power Management IC have multiple pins which can be configured for different functionality. This pins can be configured for different function. Also their properties like pull up/down, open drain enable/disable are configurable. Add support for pincontrol driver Palmas series device like TPS65913, TPS80036. The driver supports to be register from DT only. Changes from V1: - Add generic property for pins and functions in pinconf-generic. - Add APIs to map the DT and subnode. - Move common utils APIs to the pinctrl-utils from this file. - Update the binding document accordingly. Changes from V2: - Add ack by Lee. - Correct the binding docs. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>hifive-unleashed-5.1
Laxman Dewangan
Linus Walleij
parent
e81c8f18af
commit
0a8d3e2412
|
|
@ -0,0 +1,96 @@
|
|||
Palmas Pincontrol bindings
|
||||
|
||||
The pins of Palmas device can be set on different option and provides
|
||||
the configuration for Pull UP/DOWN, open drain etc.
|
||||
|
||||
Required properties:
|
||||
- compatible: It must be one of following:
|
||||
- "ti,palmas-pinctrl" for Palma series of the pincontrol.
|
||||
- "ti,tps65913-pinctrl" for Palma series device TPS65913.
|
||||
- "ti,tps80036-pinctrl" for Palma series device TPS80036.
|
||||
|
||||
Please refer to pinctrl-bindings.txt in this directory for details of the
|
||||
common pinctrl bindings used by client devices, including the meaning of the
|
||||
phrase "pin configuration node".
|
||||
|
||||
Palmas's pin configuration nodes act as a container for an arbitrary number of
|
||||
subnodes. Each of these subnodes represents some desired configuration for a
|
||||
list of pins. This configuration can include the mux function to select on
|
||||
those pin(s), and various pin configuration parameters, such as pull-up,
|
||||
open drain.
|
||||
|
||||
The name of each subnode is not important; all subnodes should be enumerated
|
||||
and processed purely based on their content.
|
||||
|
||||
Each subnode only affects those parameters that are explicitly listed. In
|
||||
other words, a subnode that lists a mux function but no pin configuration
|
||||
parameters implies no information about any pin configuration parameters.
|
||||
Similarly, a pin subnode that describes a pullup parameter implies no
|
||||
information about e.g. the mux function.
|
||||
|
||||
Optional properties:
|
||||
- ti,palmas-enable-dvfs1: Enable DVFS1. Configure pins for DVFS1 mode.
|
||||
Selection primary or secondary function associated to I2C2_SCL_SCE,
|
||||
I2C2_SDA_SDO pin/pad for DVFS1 interface
|
||||
- ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode.
|
||||
Selection primary or secondary function associated to GPADC_START
|
||||
and SYSEN2 pin/pad for DVFS2 interface
|
||||
|
||||
This binding uses the following generic properties as defined in
|
||||
pinctrl-bindings.txt:
|
||||
|
||||
Required: pins
|
||||
Options: function, bias-disable, bias-pull-up, bias-pull-down,
|
||||
bias-pin-default, drive-open-drain.
|
||||
|
||||
Note that many of these properties are only valid for certain specific pins.
|
||||
See the Palmas device datasheet for complete details regarding which pins
|
||||
support which functionality.
|
||||
|
||||
Valid values for pin names are:
|
||||
gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
|
||||
gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, vac, powergood,
|
||||
nreswarm, pwrdown, gpadc_start, reset_in, nsleep, enable1, enable2,
|
||||
int.
|
||||
|
||||
Valid value of function names are:
|
||||
gpio, led, pwm, regen, sysen, clk32kgaudio, id, vbus_det, chrg_det,
|
||||
vac, vacok, powergood, usb_psel, msecure, pwrhold, int, nreswarm,
|
||||
simrsto, simrsti, low_vbat, wireless_chrg1, rcm, pwrdown, gpadc_start,
|
||||
reset_in, nsleep, enable.
|
||||
|
||||
There are 4 special functions: opt0, opt1, opt2 and opt3. If any of these
|
||||
functions is selected then directly pins register will be written with 0, 1, 2
|
||||
or 3 respectively if it is valid for that pins or list of pins.
|
||||
|
||||
Example:
|
||||
palmas: tps65913 {
|
||||
....
|
||||
pinctrl {
|
||||
compatible = "ti,tps65913-pinctrl";
|
||||
ti,palmas-enable-dvfs1;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&palmas_pins_state>;
|
||||
|
||||
palmas_pins_state: pinmux {
|
||||
gpio0 {
|
||||
pins = "gpio0";
|
||||
function = "id";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
vac {
|
||||
pins = "vac";
|
||||
function = "vacok";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
gpio5 {
|
||||
pins = "gpio5";
|
||||
function = "opt0";
|
||||
drive-open-drain = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
....
|
||||
};
|
||||
|
|
@ -261,6 +261,16 @@ config PINCTRL_EXYNOS5440
|
|||
select PINMUX
|
||||
select PINCONF
|
||||
|
||||
config PINCTRL_PALMAS
|
||||
bool "Pinctrl driver for the PALMA Series MFD devices"
|
||||
depends on OF && MFD_PALMAS
|
||||
select GENERIC_PINCONF
|
||||
help
|
||||
Palmas device supports the configuration of pins for different
|
||||
functionality. This driver supports the pinmux, push-pull and
|
||||
open drain configuration for the Palmas series devices like
|
||||
TPS65913, TPS80036 etc.
|
||||
|
||||
config PINCTRL_S3C24XX
|
||||
bool "Samsung S3C24XX SoC pinctrl driver"
|
||||
depends on ARCH_S3C24XX
|
||||
|
|
|
|||
|
|
@ -32,6 +32,7 @@ obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
|
|||
obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
|
||||
obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
|
||||
obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o
|
||||
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
|
||||
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
|
||||
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
|
||||
obj-$(CONFIG_PINCTRL_SIRF) += sirf/
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -449,7 +449,7 @@ enum usb_irq_events {
|
|||
#define PALMAS_DVFS_BASE 0x180
|
||||
#define PALMAS_PMU_CONTROL_BASE 0x1A0
|
||||
#define PALMAS_RESOURCE_BASE 0x1D4
|
||||
#define PALMAS_PU_PD_OD_BASE 0x1F4
|
||||
#define PALMAS_PU_PD_OD_BASE 0x1F0
|
||||
#define PALMAS_LED_BASE 0x200
|
||||
#define PALMAS_INTERRUPT_BASE 0x210
|
||||
#define PALMAS_USB_OTG_BASE 0x250
|
||||
|
|
@ -1734,16 +1734,20 @@ enum usb_irq_events {
|
|||
#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT 0
|
||||
|
||||
/* Registers for function PAD_CONTROL */
|
||||
#define PALMAS_PU_PD_INPUT_CTRL1 0x0
|
||||
#define PALMAS_PU_PD_INPUT_CTRL2 0x1
|
||||
#define PALMAS_PU_PD_INPUT_CTRL3 0x2
|
||||
#define PALMAS_OD_OUTPUT_CTRL 0x4
|
||||
#define PALMAS_POLARITY_CTRL 0x5
|
||||
#define PALMAS_PRIMARY_SECONDARY_PAD1 0x6
|
||||
#define PALMAS_PRIMARY_SECONDARY_PAD2 0x7
|
||||
#define PALMAS_I2C_SPI 0x8
|
||||
#define PALMAS_PU_PD_INPUT_CTRL4 0x9
|
||||
#define PALMAS_PRIMARY_SECONDARY_PAD3 0xA
|
||||
#define PALMAS_OD_OUTPUT_CTRL2 0x2
|
||||
#define PALMAS_POLARITY_CTRL2 0x3
|
||||
#define PALMAS_PU_PD_INPUT_CTRL1 0x4
|
||||
#define PALMAS_PU_PD_INPUT_CTRL2 0x5
|
||||
#define PALMAS_PU_PD_INPUT_CTRL3 0x6
|
||||
#define PALMAS_PU_PD_INPUT_CTRL5 0x7
|
||||
#define PALMAS_OD_OUTPUT_CTRL 0x8
|
||||
#define PALMAS_POLARITY_CTRL 0x9
|
||||
#define PALMAS_PRIMARY_SECONDARY_PAD1 0xA
|
||||
#define PALMAS_PRIMARY_SECONDARY_PAD2 0xB
|
||||
#define PALMAS_I2C_SPI 0xC
|
||||
#define PALMAS_PU_PD_INPUT_CTRL4 0xD
|
||||
#define PALMAS_PRIMARY_SECONDARY_PAD3 0xE
|
||||
#define PALMAS_PRIMARY_SECONDARY_PAD4 0xF
|
||||
|
||||
/* Bit definitions for PU_PD_INPUT_CTRL1 */
|
||||
#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD 0x40
|
||||
|
|
@ -2501,6 +2505,15 @@ enum usb_irq_events {
|
|||
#define PALMAS_PU_PD_GPIO_CTRL1 0x6
|
||||
#define PALMAS_PU_PD_GPIO_CTRL2 0x7
|
||||
#define PALMAS_OD_OUTPUT_GPIO_CTRL 0x8
|
||||
#define PALMAS_GPIO_DATA_IN2 0x9
|
||||
#define PALMAS_GPIO_DATA_DIR2 0x0A
|
||||
#define PALMAS_GPIO_DATA_OUT2 0x0B
|
||||
#define PALMAS_GPIO_DEBOUNCE_EN2 0x0C
|
||||
#define PALMAS_GPIO_CLEAR_DATA_OUT2 0x0D
|
||||
#define PALMAS_GPIO_SET_DATA_OUT2 0x0E
|
||||
#define PALMAS_PU_PD_GPIO_CTRL3 0x0F
|
||||
#define PALMAS_PU_PD_GPIO_CTRL4 0x10
|
||||
#define PALMAS_OD_OUTPUT_GPIO_CTRL2 0x11
|
||||
|
||||
/* Bit definitions for GPIO_DATA_IN */
|
||||
#define PALMAS_GPIO_DATA_IN_GPIO_7_IN 0x80
|
||||
|
|
|
|||
Loading…
Reference in New Issue