redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: SoC updates 

The code changes are mostly for 32-bit platforms and include:
 
 - Lots of updates for the Nvidia Tegra platform, including
   cpuidle, pmc, and dt-binding changes
 
 - Microchip at91 power management updates for the recently added
   sam9x60 SoC
 
 - Treewide setup_irq deprecation by afzal mohammed
 
 - STMicroelectronics stm32 gains earlycon support
 
 - Renesas platforms with Cortex-A9 can now use the global timer
 
 - Some TI OMAP2+ platforms gain cpuidle support
 
 - Various cleanups for the i.MX6 and Orion platforms, as well as
   Kconfig files across all platforms
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaLsACgkQmmx57+YA
 GNkg/Q/9EmLGT/bznqi6P/8V75qPY6j4swife5HlI43EdCEyN+iME1w1rFfrNilf
 A/QyXzxhYgUZoyIt7K4qjWc8fPNlJZ8X10UqeEftQFxi82cmX2+OaT2fy6OdHVRJ
 SAGb1pw7463TQ6LKA7LC7rztFjahsjnE/9szlgXQT4v5OzayGyxd3OKy2Q1zASEi
 rwN+85Lh+xJvWhhenPKVvs2Dei+up8Y9uyPfJkj2QudCB+zx5k5stkk4EiQLBd1W
 SHzhijbSU3MrAUz2Cnp9Qa+86DdGPvFPfpzQy3pSYU9nNrC0aKpS8YmHT99SIWVN
 6R1YJF7Htmui5I9+O0baejJMEqvzGUysqe+rQdCofD7ooVKWU7WKYj5HxZxyBCEN
 dvlN3KRmS6l5KLsZARSxuBUw2MPTgjsxczZ84NKMLj8czw6yXyrePZ1RWiEZ4HIu
 4GiFNLYSMmAynD/dLuC9USDsjlPsQKnQ3e8hDf3a6oK5OHUIkr3uvguhqWa5WJsi
 cy2DUeWJkXgJDhlxcfr8MiPpPJRo3N/8O8PYci8dkdDFRs32j/5Qf22vywDdUHaZ
 I9Pl+VOGOSGiqRc9gmay6DNXpJusfuv72omrz4rL4kGMahpk0LeV5w+a9TdrkreY
 sLM67wtshOjOVMc/ebQ5Q8RR17Go+MFK+Co9Yc1ybbQ6lkSzeuY=
 =UTk1
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...
alistair/sensors
Linus Torvalds 2020-04-03 15:02:35 -07:00
parent de3c913c6e f125e2d433
commit 0e8fb69f28
85 changed files with 2290 additions and 1448 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/arm/cpus.yaml
View File

@ -212,6 +212,8 @@ properties:
- rockchip,rk3066-smp
- socionext,milbeaut-m10v-smp
- ste,dbx500-smp
- ti,am3352
- ti,am4372
cpu-release-addr:
$ref: '/schemas/types.yaml#/definitions/uint64'

300
Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
View File

@ -1,300 +0,0 @@
NVIDIA Tegra Power Management Controller (PMC)
== Power Management Controller Node ==
The PMC block interacts with an external Power Management Unit. The PMC
mostly controls the entry and exit of the system from different sleep
modes. It provides power-gating controllers for SoC and CPU power-islands.
Required properties:
- name : Should be pmc
- compatible : Should contain one of the following:
For Tegra20 must contain "nvidia,tegra20-pmc".
For Tegra30 must contain "nvidia,tegra30-pmc".
For Tegra114 must contain "nvidia,tegra114-pmc"
For Tegra124 must contain "nvidia,tegra124-pmc"
For Tegra132 must contain "nvidia,tegra124-pmc"
For Tegra210 must contain "nvidia,tegra210-pmc"
- reg : Offset and length of the register set for the device
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pclk" (The Tegra clock of that name),
"clk32k_in" (The 32KHz clock input to Tegra).
Optional properties:
- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
The PMU is an external Power Management Unit, whose interrupt output
signal is fed into the PMC. This signal is optionally inverted, and then
fed into the ARM GIC. The PMC is not involved in the detection or
handling of this interrupt signal, merely its inversion.
- nvidia,suspend-mode : The suspend mode that the platform should use.
Valid values are 0, 1 and 2:
0 (LP0): CPU + Core voltage off and DRAM in self-refresh
1 (LP1): CPU voltage off and DRAM in self-refresh
2 (LP2): CPU voltage off
- nvidia,core-power-req-active-high : Boolean, core power request active-high
- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
is enabled.
Required properties when nvidia,suspend-mode is specified:
- nvidia,cpu-pwr-good-time : CPU power good time in uS.
- nvidia,cpu-pwr-off-time : CPU power off time in uS.
- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
Core power good time in uS.
- nvidia,core-pwr-off-time : Core power off time in uS.
Required properties when nvidia,suspend-mode=<0>:
- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
The LP0 vector contains the warm boot code that is executed by AVP when
resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
processor and always being the first boot processor when chip is power on
or resume from deep sleep mode. When the system is resumed from the deep
sleep mode, the warm boot code will restore some PLLs, clocks and then
bring up CPU0 for resuming the system.
Hardware-triggered thermal reset:
On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
hardware-triggered thermal reset will be enabled.
Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
Tegra K1 Technical Reference Manual.
- nvidia,bus-addr : Bus address of the PMU on the I2C bus
- nvidia,reg-addr : I2C register address to write poweroff command to
- nvidia,reg-data : Poweroff command to write to PMU
Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
Defaults to 0. Valid values are described in section 12.5.2
"Pinmux Support" of the Tegra4 Technical Reference Manual.
Optional nodes:
- powergates : This node contains a hierarchy of power domain nodes, which
should match the powergates on the Tegra SoC. See "Powergate
Nodes" below.
Example:
/ SoC dts including file
pmc@7000f400 {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
clocks = <&tegra_car 110>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <100>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <458>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
nvidia,lp0-vec = <0xbdffd000 0x2000>;
};
/ Tegra board dts file
{
...
pmc@7000f400 {
i2c-thermtrip {
nvidia,i2c-controller-id = <4>;
nvidia,bus-addr = <0x40>;
nvidia,reg-addr = <0x36>;
nvidia,reg-data = <0x2>;
};
};
...
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
...
};
== Powergate Nodes ==
Each of the powergate nodes represents a power-domain on the Tegra SoC
that can be power-gated by the Tegra PMC. The name of the powergate node
should be one of the below. Note that not every powergate is applicable
to all Tegra devices and the following list shows which powergates are
applicable to which devices. Please refer to the Tegra TRM for more
details on the various powergates.
Name Description Devices Applicable
3d 3D Graphics Tegra20/114/124/210
3d0 3D Graphics 0 Tegra30
3d1 3D Graphics 1 Tegra30
aud Audio Tegra210
dfd Debug Tegra210
dis Display A Tegra114/124/210
disb Display B Tegra114/124/210
heg 2D Graphics Tegra30/114/124/210
iram Internal RAM Tegra124/210
mpe MPEG Encode All
nvdec NVIDIA Video Decode Engine Tegra210
nvjpg NVIDIA JPEG Engine Tegra210
pcie PCIE Tegra20/30/124/210
sata SATA Tegra30/124/210
sor Display interfaces Tegra124/210
ve2 Video Encode Engine 2 Tegra210
venc Video Encode Engine All
vdec Video Decode Engine Tegra20/30/114/124
vic Video Imaging Compositor Tegra124/210
xusba USB Partition A Tegra114/124/210
xusbb USB Partition B Tegra114/124/210
xusbc USB Partition C Tegra114/124/210
Required properties:
- clocks: Must contain an entry for each clock required by the PMC for
controlling a power-gate. See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each reset required by the PMC for
controlling a power-gate. See ../reset/reset.txt for details.
- #power-domain-cells: Must be 0.
Example:
pmc: pmc@7000e400 {
compatible = "nvidia,tegra210-pmc";
reg = <0x0 0x7000e400 0x0 0x400>;
clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
powergates {
pd_audio: aud {
clocks = <&tegra_car TEGRA210_CLK_APE>,
<&tegra_car TEGRA210_CLK_APB2APE>;
resets = <&tegra_car 198>;
#power-domain-cells = <0>;
};
};
};
== Powergate Clients ==
Hardware blocks belonging to a power domain should contain a "power-domains"
property that is a phandle pointing to the corresponding powergate node.
Example:
adma: adma@702e2000 {
...
power-domains = <&pd_audio>;
...
};
== Pad Control ==
On Tegra SoCs a pad is a set of pins which are configured as a group.
The pin grouping is a fixed attribute of the hardware. The PMC can be
used to set pad power state and signaling voltage. A pad can be either
in active or power down mode. The support for power state and signaling
voltage configuration varies depending on the pad in question. 3.3 V and
1.8 V signaling voltages are supported on pins where software
controllable signaling voltage switching is available.
The pad configuration state nodes are placed under the pmc node and they
are referred to by the pinctrl client properties. For more information
see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
The pad name should be used as the value of the pins property in pin
configuration nodes.
The following pads are present on Tegra124 and Tegra132:
audio bb cam comp
csia csb cse dsi
dsib dsic dsid hdmi
hsic hv lvds mipi-bias
nand pex-bias pex-clk1 pex-clk2
pex-cntrl sdmmc1 sdmmc3 sdmmc4
sys_ddc uart usb0 usb1
usb2 usb_bias
The following pads are present on Tegra210:
audio audio-hv cam csia
csib csic csid csie
csif dbg debug-nonao dmic
dp dsi dsib dsic
dsid emmc emmc2 gpio
hdmi hsic lvds mipi-bias
pex-bias pex-clk1 pex-clk2 pex-cntrl
sdmmc1 sdmmc3 spi spi-hv
uart usb0 usb1 usb2
usb3 usb-bias
Required pin configuration properties:
- pins: Must contain name of the pad(s) to be configured.
Optional pin configuration properties:
- low-power-enable: Configure the pad into power down mode
- low-power-disable: Configure the pad into active mode
- power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
The values are defined in
include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
Note: The power state can be configured on all of the Tegra124 and
Tegra132 pads. None of the Tegra124 or Tegra132 pads support
signaling voltage switching.
Note: All of the listed Tegra210 pads except pex-cntrl support power
state configuration. Signaling voltage switching is supported on
following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
Pad configuration state example:
pmc: pmc@7000e400 {
compatible = "nvidia,tegra210-pmc";
reg = <0x0 0x7000e400 0x0 0x400>;
clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
...
sdmmc1_3v3: sdmmc1-3v3 {
pins = "sdmmc1";
power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
};
sdmmc1_1v8: sdmmc1-1v8 {
pins = "sdmmc1";
power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
};
hdmi_off: hdmi-off {
pins = "hdmi";
low-power-enable;
}
hdmi_on: hdmi-on {
pins = "hdmi";
low-power-disable;
}
};
Pinctrl client example:
sdmmc1: sdhci@700b0000 {
...
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
pinctrl-0 = <&sdmmc1_3v3>;
pinctrl-1 = <&sdmmc1_1v8>;
};
...
sor@54540000 {
...
pinctrl-0 = <&hdmi_off>;
pinctrl-1 = <&hdmi_on>;
pinctrl-names = "hdmi-on", "hdmi-off";
};

354
Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml 100644
View File

@ -0,0 +1,354 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Tegra Power Management Controller (PMC)
maintainers:
- Thierry Reding <thierry.reding@gmail.com>
- Jonathan Hunter <jonathanh@nvidia.com>
properties:
compatible:
enum:
- nvidia,tegra20-pmc
- nvidia,tegra20-pmc
- nvidia,tegra30-pmc
- nvidia,tegra114-pmc
- nvidia,tegra124-pmc
- nvidia,tegra210-pmc
reg:
maxItems: 1
description:
Offset and length of the register set for the device.
clock-names:
items:
- const: pclk
- const: clk32k_in
description:
Must includes entries pclk and clk32k_in.
pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
input to Tegra.
clocks:
maxItems: 2
description:
Must contain an entry for each entry in clock-names.
See ../clocks/clocks-bindings.txt for details.
'#clock-cells':
const: 1
description:
Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
PMC also has blink control which allows 32Khz clock output to
Tegra blink pad.
Consumer of PMC clock should specify the desired clock by having
the clock ID in its "clocks" phandle cell with pmc clock provider.
See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
clock IDs.
'#interrupt-cells':
const: 2
description:
Specifies number of cells needed to encode an interrupt source.
The value must be 2.
interrupt-controller: true
nvidia,invert-interrupt:
$ref: /schemas/types.yaml#/definitions/flag
description: Inverts the PMU interrupt signal.
The PMU is an external Power Management Unit, whose interrupt output
signal is fed into the PMC. This signal is optionally inverted, and
then fed into the ARM GIC. The PMC is not involved in the detection
or handling of this interrupt signal, merely its inversion.
nvidia,core-power-req-active-high:
$ref: /schemas/types.yaml#/definitions/flag
description: Core power request active-high.
nvidia,sys-clock-req-active-high:
$ref: /schemas/types.yaml#/definitions/flag
description: System clock request active-high.
nvidia,combined-power-req:
$ref: /schemas/types.yaml#/definitions/flag
description: combined power request for CPU and Core.
nvidia,cpu-pwr-good-en:
$ref: /schemas/types.yaml#/definitions/flag
description:
CPU power good signal from external PMIC to PMC is enabled.
nvidia,suspend-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
description:
The suspend mode that the platform should use.
Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
Mode 2 is for LP2, CPU voltage off
nvidia,cpu-pwr-good-time:
$ref: /schemas/types.yaml#/definitions/uint32
description: CPU power good time in uSec.
nvidia,cpu-pwr-off-time:
$ref: /schemas/types.yaml#/definitions/uint32
description: CPU power off time in uSec.
nvidia,core-pwr-good-time:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
<Oscillator-stable-time Power-stable-time>
Core power good time in uSec.
nvidia,core-pwr-off-time:
$ref: /schemas/types.yaml#/definitions/uint32
description: Core power off time in uSec.
nvidia,lp0-vec:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
<start length> Starting address and length of LP0 vector.
The LP0 vector contains the warm boot code that is executed
by AVP when resuming from the LP0 state.
The AVP (Audio-Video Processor) is an ARM7 processor and
always being the first boot processor when chip is power on
or resume from deep sleep mode. When the system is resumed
from the deep sleep mode, the warm boot code will restore
some PLLs, clocks and then brings up CPU0 for resuming the
system.
i2c-thermtrip:
type: object
description:
On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
hardware-triggered thermal reset will be enabled.
properties:
nvidia,i2c-controller-id:
$ref: /schemas/types.yaml#/definitions/uint32
description:
ID of I2C controller to send poweroff command to PMU.
Valid values are described in section 9.2.148
"APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
Manual.
nvidia,bus-addr:
$ref: /schemas/types.yaml#/definitions/uint32
description: Bus address of the PMU on the I2C bus.
nvidia,reg-addr:
$ref: /schemas/types.yaml#/definitions/uint32
description: PMU I2C register address to issue poweroff command.
nvidia,reg-data:
$ref: /schemas/types.yaml#/definitions/uint32
description: Poweroff command to write to PMU.
nvidia,pinmux-id:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Pinmux used by the hardware when issuing Poweroff command.
Defaults to 0. Valid values are described in section 12.5.2
"Pinmux Support" of the Tegra4 Technical Reference Manual.
required:
- nvidia,i2c-controller-id
- nvidia,bus-addr
- nvidia,reg-addr
- nvidia,reg-data
additionalProperties: false
powergates:
type: object
description: |
This node contains a hierarchy of power domain nodes, which should
match the powergates on the Tegra SoC. Each powergate node
represents a power-domain on the Tegra SoC that can be power-gated
by the Tegra PMC.
Hardware blocks belonging to a power domain should contain
"power-domains" property that is a phandle pointing to corresponding
powergate node.
The name of the powergate node should be one of the below. Note that
not every powergate is applicable to all Tegra devices and the following
list shows which powergates are applicable to which devices.
Please refer to Tegra TRM for mode details on the powergate nodes to
use for each power-gate block inside Tegra.
Name Description Devices Applicable
3d 3D Graphics Tegra20/114/124/210
3d0 3D Graphics 0 Tegra30
3d1 3D Graphics 1 Tegra30
aud Audio Tegra210
dfd Debug Tegra210
dis Display A Tegra114/124/210
disb Display B Tegra114/124/210
heg 2D Graphics Tegra30/114/124/210
iram Internal RAM Tegra124/210
mpe MPEG Encode All
nvdec NVIDIA Video Decode Engine Tegra210
nvjpg NVIDIA JPEG Engine Tegra210
pcie PCIE Tegra20/30/124/210
sata SATA Tegra30/124/210
sor Display interfaces Tegra124/210
ve2 Video Encode Engine 2 Tegra210
venc Video Encode Engine All
vdec Video Decode Engine Tegra20/30/114/124
vic Video Imaging Compositor Tegra124/210
xusba USB Partition A Tegra114/124/210
xusbb USB Partition B Tegra114/124/210
xusbc USB Partition C Tegra114/124/210
patternProperties:
"^[a-z0-9]+$":
type: object
patternProperties:
clocks:
minItems: 1
maxItems: 8
description:
Must contain an entry for each clock required by the PMC
for controlling a power-gate.
See ../clocks/clock-bindings.txt document for more details.
resets:
minItems: 1
maxItems: 8
description:
Must contain an entry for each reset required by the PMC
for controlling a power-gate.
See ../reset/reset.txt for more details.
'#power-domain-cells':
const: 0
description: Must be 0.
required:
- clocks
- resets
- '#power-domain-cells'
additionalProperties: false
patternProperties:
"^[a-f0-9]+-[a-f0-9]+$":
type: object
description:
This is a Pad configuration node. On Tegra SOCs a pad is a set of
pins which are configured as a group. The pin grouping is a fixed
attribute of the hardware. The PMC can be used to set pad power state
and signaling voltage. A pad can be either in active or power down mode.
The support for power state and signaling voltage configuration varies
depending on the pad in question. 3.3V and 1.8V signaling voltages
are supported on pins where software controllable signaling voltage
switching is available.
The pad configuration state nodes are placed under the pmc node and they
are referred to by the pinctrl client properties. For more information
see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
The pad name should be used as the value of the pins property in pin
configuration nodes.
The following pads are present on Tegra124 and Tegra132
audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic,
hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl,
sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias.
The following pads are present on Tegra210
audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg,
debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi,
hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1,
sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias.
properties:
pins:
$ref: /schemas/types.yaml#/definitions/string
description: Must contain name of the pad(s) to be configured.
low-power-enable:
$ref: /schemas/types.yaml#/definitions/flag
description: Configure the pad into power down mode.
low-power-disable:
$ref: /schemas/types.yaml#/definitions/flag
description: Configure the pad into active mode.
power-source:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
The values are defined in
include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
Power state can be configured on all Tegra124 and Tegra132
pads. None of the Tegra124 or Tegra132 pads support signaling
voltage switching.
All of the listed Tegra210 pads except pex-cntrl support power
state configuration. Signaling voltage switching is supported
on below Tegra210 pads.
audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
sdmmc3, spi, spi-hv, and uart.
required:
- pins
additionalProperties: false
required:
- compatible
- reg
- clock-names
- clocks
- '#clock-cells'
dependencies:
"nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
"nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
"nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
examples:
- |
#include <dt-bindings/clock/tegra210-car.h>
#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/soc/tegra-pmc.h>
tegra_pmc: pmc@7000e400 {
compatible = "nvidia,tegra210-pmc";
reg = <0x0 0x7000e400 0x0 0x400>;
clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
#clock-cells = <1>;
nvidia,invert-interrupt;
nvidia,suspend-mode = <0>;
nvidia,cpu-pwr-good-time = <0>;
nvidia,cpu-pwr-off-time = <0>;
nvidia,core-pwr-good-time = <4587 3876>;
nvidia,core-pwr-off-time = <39065>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
powergates {
pd_audio: aud {
clocks = <&tegra_car TEGRA210_CLK_APE>,
<&tegra_car TEGRA210_CLK_APB2APE>;
resets = <&tegra_car 198>;
#power-domain-cells = <0>;
};
pd_xusbss: xusba {
clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
#power-domain-cells = <0>;
};
};
};

24
Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
View File

@ -37,6 +37,7 @@ Required properties:
- Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
- Tegra210: "nvidia,tegra210-xusb-padctl"
- Tegra186: "nvidia,tegra186-xusb-padctl"
- Tegra194: "nvidia,tegra194-xusb-padctl"
- reg: Physical base address and length of the controller's registers.
- resets: Must contain an entry for each entry in reset-names.
- reset-names: Must include the following entries:
@ -62,6 +63,10 @@ For Tegra186:
- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
For Tegra194:
- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
3.3 V.
- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
Pad nodes:
==========
@ -154,6 +159,11 @@ For Tegra210, the list of valid PHY nodes is given below:
- sata: sata-0
- functions: "usb3-ss", "sata"
For Tegra194, the list of valid PHY nodes is given below:
- usb2: usb2-0, usb2-1, usb2-2, usb2-3
- functions: "xusb"
- usb3: usb3-0, usb3-1, usb3-2, usb3-3
- functions: "xusb"
Port nodes:
===========
@ -174,6 +184,12 @@ Required properties:
- "device": for USB device mode
- "otg": for USB OTG mode
Required properties for OTG/Peripheral capable USB2 ports:
- usb-role-switch: Boolean property to indicate that the port support OTG or
peripheral mode. If present, the port supports switching between USB host
and peripheral roles. Connector should be added as subnode.
See usb/usb-conn-gpio.txt.
Optional properties:
- nvidia,internal: A boolean property whose presence determines that a port
is internal. In the absence of this property the port is considered to be
@ -221,6 +237,11 @@ Optional properties:
is internal. In the absence of this property the port is considered to be
external.
- maximum-speed: Only for Tegra194. A string property that specifies maximum
supported speed of a usb3 port. Valid values are:
- "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed.
- "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only.
For Tegra124 and Tegra132, the XUSB pad controller exposes the following
ports:
- 3x USB2: usb2-0, usb2-1, usb2-2
@ -233,6 +254,9 @@ For Tegra210, the XUSB pad controller exposes the following ports:
- 2x HSIC: hsic-0, hsic-1
- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
For Tegra194, the XUSB pad controller exposes the following ports:
- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3
- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
Examples:
=========

1
Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
View File

@ -20,6 +20,7 @@ Required properties in pwrap device node.
- compatible:
"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
"mediatek,mt6765-pwrap" for MT6765 SoCs
"mediatek,mt6779-pwrap" for MT6779 SoCs
"mediatek,mt6797-pwrap" for MT6797 SoCs
"mediatek,mt7622-pwrap" for MT7622 SoCs
"mediatek,mt8135-pwrap" for MT8135 SoCs

190
Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml 100644
View File

@ -0,0 +1,190 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
description:
The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
USB 3.0 SuperSpeed protocols.
maintainers:
- Nagarjuna Kristam <nkristam@nvidia.com>
- JC Kuo <jckuo@nvidia.com>
- Thierry Reding <treding@nvidia.com>
properties:
compatible:
items:
- enum:
- nvidia,tegra210-xudc # For Tegra210
- nvidia,tegra186-xudc # For Tegra186
reg:
minItems: 2
maxItems: 3
items:
- description: XUSB device controller registers
- description: XUSB device PCI Config registers
- description: XUSB device registers.
reg-names:
minItems: 2
maxItems: 3
items:
- const: base
- const: fpci
- const: ipfs
interrupts:
maxItems: 1
description: Must contain the XUSB device interrupt.
clocks:
minItems: 4
maxItems: 5
items:
- description: Clock to enable core XUSB dev clock.
- description: Clock to enable XUSB super speed clock.
- description: Clock to enable XUSB super speed dev clock.
- description: Clock to enable XUSB high speed dev clock.
- description: Clock to enable XUSB full speed dev clock.
clock-names:
minItems: 4
maxItems: 5
items:
- const: dev
- const: ss
- const: ss_src
- const: fs_src
- const: hs_src
power-domains:
maxItems: 2
items:
- description: XUSBB(device) power-domain
- description: XUSBA(superspeed) power-domain
power-domain-names:
maxItems: 2
items:
- const: dev
- const: ss
nvidia,xusb-padctl:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
phandle to the XUSB pad controller that is used to configure the USB pads
used by the XUDC controller.
phys:
minItems: 1
description:
Must contain an entry for each entry in phy-names.
See ../phy/phy-bindings.txt for details.
phy-names:
minItems: 1
items:
- const: usb2-0
- const: usb2-1
- const: usb2-2
- const: usb2-3
- const: usb3-0
- const: usb3-1
- const: usb3-2
- const: usb3-3
avddio-usb-supply:
description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
hvdd-usb-supply:
description: USB controller power supply. Must supply 3.3 V.
required:
- compatible
- reg
- reg-names
- interrupts
- clocks
- clock-names
- power-domains
- power-domain-names
- nvidia,xusb-padctl
- phys
- phy-names
allOf:
- if:
properties:
compatible:
contains:
enum:
- nvidia,tegra210-xudc
then:
properties:
reg:
minItems: 3
reg-names:
minItems: 3
clocks:
minItems: 5
clock-names:
minItems: 5
required:
- avddio-usb-supply
- hvdd-usb-supply
- if:
properties:
compatible:
contains:
enum:
- nvidia,tegra186-xudc
then:
properties:
reg:
maxItems: 2
reg-names:
maxItems: 2
clocks:
maxItems: 4
clock-names:
maxItems: 4
examples:
- |
#include <dt-bindings/clock/tegra210-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
usb@700d0000 {
compatible = "nvidia,tegra210-xudc";
reg = <0x0 0x700d0000 0x0 0x8000>,
<0x0 0x700d8000 0x0 0x1000>,
<0x0 0x700d9000 0x0 0x1000>;
reg-names = "base", "fpci", "ipfs";
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
<&tegra_car TEGRA210_CLK_XUSB_SS>,
<&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
<&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
<&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
power-domains = <&pd_xusbdev>, <&pd_xusbss>;
power-domain-names = "dev", "ss";
nvidia,xusb-padctl = <&padctl>;
phys = <&micro_b>;
phy-names = "usb2-0";
avddio-usb-supply = <&vdd_pex_1v05>;
hvdd-usb-supply = <&vdd_3v3_sys>;
};

42
arch/arm/Kconfig.debug
View File

@ -1201,23 +1201,49 @@ choice
config STM32F4_DEBUG_UART
bool "Use STM32F4 UART for low-level debug"
depends on ARCH_STM32
depends on MACH_STM32F429 || MACH_STM32F469
select DEBUG_STM32_UART
help
Say Y here if you want kernel low-level debugging support
on STM32F4 based platforms, which default UART is wired on
USART1.
USART1, but another UART instance can be selected by modifying
CONFIG_DEBUG_UART_PHYS.
If unsure, say N.
config STM32F7_DEBUG_UART
bool "Use STM32F7 UART for low-level debug"
depends on ARCH_STM32
depends on MACH_STM32F746 || MACH_STM32F769
select DEBUG_STM32_UART
help
Say Y here if you want kernel low-level debugging support
on STM32F7 based platforms, which default UART is wired on
USART1.
USART1, but another UART instance can be selected by modifying
CONFIG_DEBUG_UART_PHYS.
If unsure, say N.
config STM32H7_DEBUG_UART
bool "Use STM32H7 UART for low-level debug"
depends on MACH_STM32H743
select DEBUG_STM32_UART
help
Say Y here if you want kernel low-level debugging support
on STM32H7 based platforms, which default UART is wired on
USART1, but another UART instance can be selected by modifying
CONFIG_DEBUG_UART_PHYS.
If unsure, say N.
config STM32MP1_DEBUG_UART
bool "Use STM32MP1 UART for low-level debug"
depends on MACH_STM32MP157
select DEBUG_STM32_UART
help
Say Y here if you want kernel low-level debugging support
on STM32MP1 based platforms, wich default UART is wired on
UART4, but another UART instance can be selected by modifying
CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
If unsure, say N.
@ -1619,6 +1645,9 @@ config DEBUG_UART_PHYS
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x3f201000 if DEBUG_BCM2836
default 0x4000e400 if DEBUG_LL_UART_EFM32
default 0x40010000 if STM32MP1_DEBUG_UART
default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
STM32H7_DEBUG_UART
default 0x40028000 if DEBUG_AT91_SAMV7_USART1
default 0x40081000 if DEBUG_LPC18XX_UART0
default 0x40090000 if DEBUG_LPC32XX
@ -1713,7 +1742,7 @@ config DEBUG_UART_PHYS
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
DEBUG_AT91_UART
DEBUG_AT91_UART || DEBUG_STM32_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@ -1779,6 +1808,7 @@ config DEBUG_UART_VIRT
default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe010000 if STM32MP1_DEBUG_UART
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@ -1823,7 +1853,7 @@ config DEBUG_UART_VIRT
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
DEBUG_AT91_UART
DEBUG_AT91_UART || DEBUG_STM32_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"

1
arch/arm/Makefile
View File

@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
textofs-$(CONFIG_ARCH_MESON) := 0x00208000

2
arch/arm/configs/omap2plus_defconfig
View File

@ -56,6 +56,8 @@ CONFIG_CPUFREQ_DT=m
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
CONFIG_ARM_TI_CPUFREQ=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_CPUIDLE=y
CONFIG_DT_IDLE_STATES=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_PM_DEBUG=y
CONFIG_ARM_CRYPTO=y

9
arch/arm/include/debug/stm32.S
View File

@ -4,14 +4,13 @@
* Author: Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics.
*/
#define STM32_UART_BASE 0x40011000 /* USART1 */
#ifdef CONFIG_STM32F4_DEBUG_UART
#define STM32_USART_SR_OFF 0x00
#define STM32_USART_TDR_OFF 0x04
#endif
#ifdef CONFIG_STM32F7_DEBUG_UART
#if defined(CONFIG_STM32F7_DEBUG_UART) || defined(CONFIG_STM32H7_DEBUG_UART) || \
defined(CONFIG_STM32MP1_DEBUG_UART)
#define STM32_USART_SR_OFF 0x1C
#define STM32_USART_TDR_OFF 0x28
#endif
@ -20,8 +19,8 @@
#define STM32_USART_TXE (1 << 7) /* Tx data reg empty */
.macro addruart, rp, rv, tmp
ldr \rp, =STM32_UART_BASE @ physical base
ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */
ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical base
ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virt base
.endm
.macro senduart,rd,rx

1
arch/arm/mach-at91/Kconfig
View File

@ -153,7 +153,6 @@ config HAVE_AT91_USB_CLK
config COMMON_CLK_AT91
bool
select COMMON_CLK
select MFD_SYSCON
config HAVE_AT91_SMD

35
arch/arm/mach-at91/pm.c
View File

@ -736,13 +736,36 @@ backup_default:
struct pmc_info {
unsigned long uhp_udp_mask;
unsigned long mckr;
unsigned long version;
};
static const struct pmc_info pmc_infos[] __initconst = {
{ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
{ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
{ .uhp_udp_mask = AT91SAM926x_PMC_UHP },
{ .uhp_udp_mask = 0 },
{
.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
.mckr = 0x30,
.version = AT91_PMC_V1,
},
{
.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
.mckr = 0x30,
.version = AT91_PMC_V1,
},
{
.uhp_udp_mask = AT91SAM926x_PMC_UHP,
.mckr = 0x30,
.version = AT91_PMC_V1,
},
{ .uhp_udp_mask = 0,
.mckr = 0x30,
.version = AT91_PMC_V1,
},
{
.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
.mckr = 0x28,
.version = AT91_PMC_V2,
},
};
static const struct of_device_id atmel_pmc_ids[] __initconst = {
@ -757,7 +780,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
{ /* sentinel */ },
};
@ -779,6 +802,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
pmc = of_id->data;
soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
soc_pm.data.pmc_mckr_offset = pmc->mckr;
soc_pm.data.pmc_version = pmc->version;
if (pm_idle)
arm_pm_idle = pm_idle;

2
arch/arm/mach-at91/pm.h
View File

@ -33,6 +33,8 @@ struct at91_pm_data {
void __iomem *sfrbu;
unsigned int standby_mode;
unsigned int suspend_mode;
unsigned int pmc_mckr_offset;
unsigned int pmc_version;
};
#endif

4
arch/arm/mach-at91/pm_data-offsets.c
View File

@ -12,6 +12,10 @@ int main(void)
DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc));
DEFINE(PM_DATA_SFRBU, offsetof(struct at91_pm_data, sfrbu));
DEFINE(PM_DATA_PMC_MCKR_OFFSET, offsetof(struct at91_pm_data,
pmc_mckr_offset));
DEFINE(PM_DATA_PMC_VERSION, offsetof(struct at91_pm_data,
pmc_version));
return 0;
}

189
arch/arm/mach-at91/pm_suspend.S
View File

@ -18,6 +18,7 @@
pmc .req r0
tmp1 .req r4
tmp2 .req r5
tmp3 .req r6
/*
* Wait until master clock is ready (after switching master clock source)
@ -93,13 +94,17 @@ ENTRY(at91_pm_suspend_in_sram)
str tmp1, .memtype
ldr tmp1, [r0, #PM_DATA_MODE]
str tmp1, .pm_mode
ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
str tmp1, .mckr_offset
ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
str tmp1, .pmc_version
/* Both ldrne below are here to preload their address in the TLB */
ldr tmp1, [r0, #PM_DATA_SHDWC]
str tmp1, .shdwc
cmp tmp1, #0
ldrne tmp2, [tmp1, #0]
ldr tmp1, [r0, #PM_DATA_SFRBU]
str tmp1, .sfr
str tmp1, .sfrbu
cmp tmp1, #0
ldrne tmp2, [tmp1, #0x10]
@ -138,14 +143,15 @@ ENDPROC(at91_pm_suspend_in_sram)
ENTRY(at91_backup_mode)
/* Switch the master clock source to slow clock. */
ldr pmc, .pmc_base
ldr tmp1, [pmc, #AT91_PMC_MCKR]
ldr tmp2, .mckr_offset
ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, [pmc, tmp2]
wait_mckrdy
/*BUMEN*/
ldr r0, .sfr
ldr r0, .sfrbu
mov tmp1, #0x1
str tmp1, [r0, #0x10]
@ -218,6 +224,7 @@ ENDPROC(at91_backup_mode)
*/
.macro at91_pm_ulp1_mode
ldr pmc, .pmc_base
ldr tmp2, .mckr_offset
/* Save RC oscillator state and check if it is enabled. */
ldr tmp1, [pmc, #AT91_PMC_SR]
@ -254,10 +261,10 @@ ENDPROC(at91_backup_mode)
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Switch the master clock source to main clock */
ldr tmp1, [pmc, #AT91_PMC_MCKR]
ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
str tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, [pmc, tmp2]
wait_mckrdy
@ -268,6 +275,10 @@ ENDPROC(at91_backup_mode)
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Quirk for SAM9X60's PMC */
nop
nop
wait_mckrdy
/* Enable the crystal oscillator */
@ -280,9 +291,9 @@ ENDPROC(at91_backup_mode)
wait_moscrdy
/* Switch the master clock source to slow clock */
ldr tmp1, [pmc, #AT91_PMC_MCKR]
ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, [pmc, tmp2]
wait_mckrdy
@ -296,10 +307,10 @@ ENDPROC(at91_backup_mode)
wait_moscsels
/* Switch the master clock source to main clock */
ldr tmp1, [pmc, #AT91_PMC_MCKR]
ldr tmp1, [pmc, tmp2]
bic tmp1, tmp1, #AT91_PMC_CSS
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
str tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, [pmc, tmp2]
wait_mckrdy
@ -323,21 +334,160 @@ ENDPROC(at91_backup_mode)
3:
.endm
.macro at91_plla_disable
/* Save PLLA setting and disable it */
ldr tmp1, .pmc_version
cmp tmp1, #AT91_PMC_V1
beq 1f
#ifdef CONFIG_SOC_SAM9X60
/* Save PLLA settings. */
ldr tmp2, [pmc, #AT91_PMC_PLL_UPDT]
bic tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
str tmp2, [pmc, #AT91_PMC_PLL_UPDT]
/* save div. */
mov tmp1, #0
ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
bic tmp2, tmp2, #0xffffff00
orr tmp1, tmp1, tmp2
/* save mul. */
ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL1]
bic tmp2, tmp2, #0xffffff
orr tmp1, tmp1, tmp2
str tmp1, .saved_pllar
/* step 2. */
ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
/* step 3. */
ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
bic tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
str tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
/* step 4. */
ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
/* step 5. */
ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
bic tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
str tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
/* step 7. */
ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
b 2f
#endif
1: /* Save PLLA setting and disable it */
ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
str tmp1, .saved_pllar
/* Disable PLLA. */
mov tmp1, #AT91_PMC_PLLCOUNT
orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
str tmp1, [pmc, #AT91_CKGR_PLLAR]
2:
.endm
.macro at91_plla_enable
ldr tmp2, .saved_pllar
ldr tmp3, .pmc_version
cmp tmp3, #AT91_PMC_V1
beq 4f
#ifdef CONFIG_SOC_SAM9X60
/* step 1. */
ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
/* step 2. */
ldr tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA
str tmp1, [pmc, #AT91_PMC_PLL_ACR]
/* step 3. */
ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
mov tmp3, tmp2
bic tmp3, tmp3, #0xffffff
orr tmp1, tmp1, tmp3
str tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
/* step 8. */
ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
/* step 9. */
ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENLOCK
orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
bic tmp1, tmp1, #0xff
mov tmp3, tmp2
bic tmp3, tmp3, #0xffffff00
orr tmp1, tmp1, tmp3
str tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
/* step 10. */
ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
str tmp1, [pmc, #AT91_PMC_PLL_UPDT]
/* step 11. */
3: ldr tmp1, [pmc, #AT91_PMC_PLL_ISR0]
tst tmp1, #0x1
beq 3b
b 2f
#endif
/* Restore PLLA setting */
4: str tmp2, [pmc, #AT91_CKGR_PLLAR]
/* Enable PLLA. */
tst tmp2, #(AT91_PMC_MUL & 0xff0000)
bne 1f
tst tmp2, #(AT91_PMC_MUL & ~0xff0000)
beq 2f
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
2:
.endm
ENTRY(at91_ulp_mode)
ldr pmc, .pmc_base
ldr tmp2, .mckr_offset
/* Save Master clock setting */
ldr tmp1, [pmc, #AT91_PMC_MCKR]
ldr tmp1, [pmc, tmp2]
str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, [pmc, tmp2]
wait_mckrdy
at91_plla_disable
ldr r0, .pm_mode
cmp r0, #AT91_PM_ULP1
beq ulp1_mode
@ -352,11 +502,14 @@ ulp1_mode:
ulp_exit:
ldr pmc, .pmc_base
at91_plla_enable
/*
* Restore master clock setting
*/
ldr tmp1, .saved_mckr
str tmp1, [pmc, #AT91_PMC_MCKR]
ldr tmp1, .mckr_offset
ldr tmp2, .saved_mckr
str tmp2, [pmc, tmp1]
wait_mckrdy
@ -496,14 +649,20 @@ ENDPROC(at91_sramc_self_refresh)
.word 0
.shdwc:
.word 0
.sfr:
.sfrbu:
.word 0
.memtype:
.word 0
.pm_mode:
.word 0
.mckr_offset:
.word 0
.pmc_version:
.word 0
.saved_mckr:
.word 0
.saved_pllar:
.word 0
.saved_sam9_lpr:
.word 0
.saved_sam9_lpr1:

8
arch/arm/mach-bcm/Kconfig
View File

@ -20,7 +20,6 @@ config ARCH_BCM_IPROC
select GPIOLIB
select ARM_AMBA
select PINCTRL
select PCI_DOMAINS_GENERIC if PCI
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
@ -54,7 +53,6 @@ config ARCH_BCM_NSP
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
select HAVE_SMP
select THERMAL
select THERMAL_OF
help
@ -73,7 +71,6 @@ config ARCH_BCM_5301X
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
select HAVE_SMP
help
Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
@ -109,7 +106,6 @@ config ARCH_BCM_281XX
bool "Broadcom BCM281XX SoC family"
depends on ARCH_MULTI_V7
select ARCH_BCM_MOBILE
select HAVE_SMP
help
Enable support for the BCM281XX family, which includes
BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155
@ -119,7 +115,6 @@ config ARCH_BCM_21664
bool "Broadcom BCM21664 SoC family"
depends on ARCH_MULTI_V7
select ARCH_BCM_MOBILE
select HAVE_SMP
help
Enable support for the BCM21664 family, which includes
BCM21663 and BCM21664 variants.
@ -128,7 +123,6 @@ config ARCH_BCM_23550
bool "Broadcom BCM23550 SoC"
depends on ARCH_MULTI_V7
select ARCH_BCM_MOBILE
select HAVE_SMP
help
Enable support for the BCM23550.
@ -165,7 +159,6 @@ config ARCH_BCM2835
select ZONE_DMA if ARCH_MULTI_V7
select ARM_TIMER_SP804
select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
select TIMER_OF
select BCM2835_TIMER
select PINCTRL
select PINCTRL_BCM2835
@ -201,7 +194,6 @@ config ARCH_BCM_63XX
select HAVE_ARM_ARCH_TIMER
select HAVE_ARM_TWD if SMP
select HAVE_ARM_SCU if SMP
select HAVE_SMP
help
This enables support for systems based on Broadcom DSL SoCs.
It currently supports the 'BCM63XX' ARM-based family, which includes

10
arch/arm/mach-cns3xxx/core.c
View File

@ -189,12 +189,6 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction cns3xxx_timer_irq = {
.name = "timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = cns3xxx_timer_interrupt,
};
/*
* Set up the clock source and clock events devices
*/
@ -245,7 +239,9 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* Make irqs happen for the system timer */
setup_irq(timer_irq, &cns3xxx_timer_irq);
if (request_irq(timer_irq, cns3xxx_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
pr_err("Failed to request irq %d (timer)\n", timer_irq);
cns3xxx_clockevents_init(timer_irq);
}

2
arch/arm/mach-dove/common.c
View File

@ -48,7 +48,7 @@
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
static struct map_desc dove_io_desc[] __initdata = {
static struct map_desc __maybe_unused dove_io_desc[] __initdata = {
{
.virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),

14
arch/arm/mach-ep93xx/timer-ep93xx.c
View File

@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ep93xx_timer_irq = {
.name = "ep93xx timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = ep93xx_timer_interrupt,
.dev_id = &ep93xx_clockevent,
};
void __init ep93xx_timer_init(void)
{
int irq = IRQ_EP93XX_TIMER3;
unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
/* Enable and register clocksource and sched_clock on timer 4 */
writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
EP93XX_TIMER4_VALUE_HIGH);
@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void)
EP93XX_TIMER4_RATE);
/* Set up clockevent on timer 3 */
setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
&ep93xx_clockevent))
pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
clockevents_config_and_register(&ep93xx_clockevent,
EP93XX_TIMER123_RATE,
1,

10
arch/arm/mach-imx/Kconfig
View File

@ -471,8 +471,6 @@ config SOC_IMX53
config SOC_IMX6
bool
select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
@ -484,6 +482,8 @@ config SOC_IMX6
config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD
select PINCTRL_IMX6Q
@ -494,6 +494,8 @@ config SOC_IMX6Q
config SOC_IMX6SL
bool "i.MX6 SoloLite support"
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select PINCTRL_IMX6SL
select SOC_IMX6
@ -502,6 +504,8 @@ config SOC_IMX6SL
config SOC_IMX6SLL
bool "i.MX6 SoloLiteLite support"
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select PINCTRL_IMX6SLL
select SOC_IMX6
@ -510,6 +514,8 @@ config SOC_IMX6SLL
config SOC_IMX6SX
bool "i.MX6 SoloX support"
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select PINCTRL_IMX6SX
select SOC_IMX6

7
arch/arm/mach-imx/anatop.c
View File

@ -89,12 +89,11 @@ void imx_anatop_post_resume(void)
if (cpu_is_imx6sl())
imx_anatop_disconnect_high_snvs(false);
}
void __init imx_init_revision_from_anatop(void)
{
struct device_node *np;
struct device_node *np, *src_np;
void __iomem *anatop_base;
unsigned int revision;
u32 digprog;
@ -135,9 +134,10 @@ void __init imx_init_revision_from_anatop(void)
void __iomem *src_base;
u32 sbmr2;
np = of_find_compatible_node(NULL, NULL,
src_np = of_find_compatible_node(NULL, NULL,
"fsl,imx6ul-src");
src_base = of_iomap(np, 0);
of_node_put(src_np);
WARN_ON(!src_base);
sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
iounmap(src_base);
@ -149,6 +149,7 @@ void __init imx_init_revision_from_anatop(void)
}
}
}
of_node_put(np);
mxc_set_cpu_type(digprog >> 16 & 0xff);
imx_set_soc_revision(revision);

4
arch/arm/mach-imx/gpc.c
View File

@ -10,7 +10,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/irqchip/arm-gic.h>
#include "common.h"
#include "hardware.h"
@ -111,7 +111,6 @@ void imx_gpc_mask_all(void)
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
writel_relaxed(~0, reg_imr1 + i * 4);
}
}
void imx_gpc_restore_all(void)
@ -282,4 +281,5 @@ void __init imx_gpc_check_dt(void)
/* map GPC, so that at least CPUidle and WARs keep working */
gpc_base = of_iomap(np, 0);
}
of_node_put(np);
}

13
arch/arm/mach-imx/mach-imx6q.c
View File

@ -5,29 +5,16 @@
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pm_opp.h>
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include "common.h"
#include "cpuidle.h"

1
arch/arm/mach-imx/mach-imx6sl.c
View File

@ -4,7 +4,6 @@
*/
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>

1
arch/arm/mach-imx/mach-imx6ul.c
View File

@ -25,7 +25,6 @@ static void __init imx6ul_enet_clk_init(void)
IMX6UL_GPR1_ENET_CLK_OUTPUT);
else
pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
}
static int ksz8081_phy_fixup(struct phy_device *dev)

1
arch/arm/mach-imx/platsmp.c
View File

@ -109,6 +109,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
dcfg_base = of_iomap(np, 0);
of_node_put(np);
BUG_ON(!dcfg_base);
paddr = __pa_symbol(secondary_startup);

2
arch/arm/mach-imx/pm-imx6.c
View File

@ -655,6 +655,8 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
imx6_pm_stby_poweroff_probe();
of_node_put(np);
}
void __init imx6q_pm_init(void)

1
arch/arm/mach-imx/pm-imx7ulp.c
View File

@ -62,6 +62,7 @@ void __init imx7ulp_pm_init(void)
np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
smc1_base = of_iomap(np, 0);
of_node_put(np);
WARN_ON(!smc1_base);
imx7ulp_set_lpm(ULP_PM_RUN);

3
arch/arm/mach-imx/src.c
View File

@ -43,9 +43,6 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev,
int bit;
u32 val;
if (!src_base)
return -ENODEV;
if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
return -EINVAL;

12
arch/arm/mach-iop32x/time.c
View File

@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction iop_timer_irq = {
.name = "IOP Timer Tick",
.handler = iop_timer_interrupt,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.dev_id = &iop_clockevent,
};
static unsigned long iop_tick_rate;
unsigned long get_iop_tick_rate(void)
{
@ -154,6 +147,7 @@ EXPORT_SYMBOL(get_iop_tick_rate);
void __init iop_init_time(unsigned long tick_rate)
{
u32 timer_ctl;
int irq = IRQ_IOP32X_TIMER0;
sched_clock_register(iop_read_sched_clock, 32, tick_rate);
@ -168,7 +162,9 @@ void __init iop_init_time(unsigned long tick_rate)
*/
write_tmr0(timer_ctl & ~IOP_TMR_EN);
write_tisr(1);
setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq);
if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"IOP Timer Tick", &iop_clockevent))
pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
iop_clockevent.cpumask = cpumask_of(0);
clockevents_config_and_register(&iop_clockevent, tick_rate,
0xf, 0xfffffffe);

11
arch/arm/mach-mmp/time.c
View File

@ -175,13 +175,6 @@ static void __init timer_config(void)
__raw_writel(0x2, mmp_timer_base + TMR_CER);
}
static struct irqaction timer_irq = {
.name = "timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = timer_interrupt,
.dev_id = &ckevt,
};
void __init mmp_timer_init(int irq, unsigned long rate)
{
timer_config();
@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate)
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"timer", &ckevt))
pr_err("Failed to request irq %d (timer)\n", irq);
clocksource_register_hz(&cksrc, rate);
clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);

13
arch/arm/mach-omap1/pm.c
View File

@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
return IRQ_HANDLED;
}
static struct irqaction omap_wakeup_irq = {
.name = "peripheral wakeup",
.handler = omap_wakeup_interrupt
};
static const struct platform_suspend_ops omap_pm_ops = {
@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
static int __init omap_pm_init(void)
{
int error = 0;
int irq;
if (!cpu_class_is_omap1())
return -ENODEV;
@ -656,9 +652,12 @@ static int __init omap_pm_init(void)
arm_pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
irq = INT_7XX_WAKE_UP_REQ;
else if (cpu_is_omap16xx())
setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
irq = INT_1610_WAKE_UP_REQ;
if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
NULL))
pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
/* Program new power ramp-up time
* (0 for most boards since we don't lower voltage when in deep sleep)

10
arch/arm/mach-omap1/time.c
View File

@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction omap_mpu_timer1_irq = {
.name = "mpu_timer1",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = omap_mpu_timer1_interrupt,
};
static __init void omap_init_mpu_timer(unsigned long rate)
{
setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
clockevent_mpu_timer1.cpumask = cpumask_of(0);

10
arch/arm/mach-omap1/timer32k.c
View File

@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = omap_32k_timer_interrupt,
};
static __init void omap_init_32k_timer(void)
{
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER);
clockevent_32k_timer.cpumask = cpumask_of(0);
clockevents_config_and_register(&clockevent_32k_timer,

19
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -3148,15 +3148,14 @@ static int omap_hwmod_check_sysc(struct device *dev,
/**
* omap_hwmod_init_regbits - init sysconfig specific register bits
* @dev: struct device
* @oh: module
* @data: module data
* @sysc_fields: new sysc configuration
*/
static int omap_hwmod_init_regbits(struct device *dev,
static int omap_hwmod_init_regbits(struct device *dev, struct omap_hwmod *oh,
const struct ti_sysc_module_data *data,
struct sysc_regbits **sysc_fields)
{
*sysc_fields = NULL;
switch (data->cap->type) {
case TI_SYSC_OMAP2:
case TI_SYSC_OMAP2_TIMER:
@ -3191,6 +3190,12 @@ static int omap_hwmod_init_regbits(struct device *dev,
*sysc_fields = &omap_hwmod_sysc_type_usb_host_fs;
break;
default:
*sysc_fields = NULL;
if (!oh->class->sysc->sysc_fields)
return 0;
dev_err(dev, "sysc_fields not found\n");
return -EINVAL;
}
@ -3356,9 +3361,9 @@ static int omap_hwmod_check_module(struct device *dev,
if (!oh->class->sysc)
return -ENODEV;
if (sysc_fields != oh->class->sysc->sysc_fields)
dev_warn(dev, "sysc_fields %p != %p\n", sysc_fields,
oh->class->sysc->sysc_fields);
if (oh->class->sysc->sysc_fields &&
sysc_fields != oh->class->sysc->sysc_fields)
dev_warn(dev, "sysc_fields mismatch\n");
if (rev_offs != oh->class->sysc->rev_offs)
dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs,
@ -3574,7 +3579,7 @@ int omap_hwmod_init_module(struct device *dev,
cookie->data = oh;
error = omap_hwmod_init_regbits(dev, data, &sysc_fields);
error = omap_hwmod_init_regbits(dev, oh, data, &sysc_fields);
if (error)
return error;

137
arch/arm/mach-omap2/pm33xx-core.c
View File

@ -6,11 +6,14 @@
* Dave Gerlach
*/
#include <linux/cpuidle.h>
#include <linux/platform_data/pm33xx.h>
#include <asm/cpuidle.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <linux/errno.h>
#include <linux/platform_data/pm33xx.h>
#include <linux/clk.h>
#include <linux/cpu.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/wkup_m3_ipc.h>
@ -35,6 +38,14 @@ static struct clockdomain *gfx_l4ls_clkdm;
static void __iomem *scu_base;
static struct omap_hwmod *rtc_oh;
static int (*idle_fn)(u32 wfi_flags);
struct amx3_idle_state {
int wfi_flags;
};
static struct amx3_idle_state *idle_states;
static int am43xx_map_scu(void)
{
scu_base = ioremap(scu_a9_get_base(), SZ_256);
@ -68,7 +79,7 @@ static int am43xx_check_off_mode_enable(void)
return 0;
}
static int amx3_common_init(void)
static int amx3_common_init(int (*idle)(u32 wfi_flags))
{
gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
per_pwrdm = pwrdm_lookup("per_pwrdm");
@ -88,10 +99,12 @@ static int amx3_common_init(void)
else
omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF);
idle_fn = idle;
return 0;
}
static int am33xx_suspend_init(void)
static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
{
int ret;
@ -102,12 +115,12 @@ static int am33xx_suspend_init(void)
return -ENODEV;
}
ret = amx3_common_init();
ret = amx3_common_init(idle);
return ret;
}
static int am43xx_suspend_init(void)
static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
{
int ret = 0;
@ -117,11 +130,17 @@ static int am43xx_suspend_init(void)
return ret;
}
ret = amx3_common_init();
ret = amx3_common_init(idle);
return ret;
}
static int amx3_suspend_deinit(void)
{
idle_fn = NULL;
return 0;
}
static void amx3_pre_suspend_common(void)
{
omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF);
@ -201,6 +220,43 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
return ret;
}
static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
{
int ret = 0;
if (omap_irq_pending() || need_resched())
return ret;
ret = cpu_suspend(args, fn);
return ret;
}
static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args)
{
int ret = 0;
if (!scu_base)
return 0;
scu_power_mode(scu_base, SCU_PM_DORMANT);
ret = cpu_suspend(args, fn);
scu_power_mode(scu_base, SCU_PM_NORMAL);
return ret;
}
static void amx3_begin_suspend(void)
{
cpu_idle_poll_ctrl(true);
}
static void amx3_finish_suspend(void)
{
cpu_idle_poll_ctrl(false);
}
static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
{
if (soc_is_am33xx())
@ -253,7 +309,11 @@ static void am43xx_prepare_rtc_resume(void)
static struct am33xx_pm_platform_data am33xx_ops = {
.init = am33xx_suspend_init,
.deinit = amx3_suspend_deinit,
.soc_suspend = am33xx_suspend,
.cpu_suspend = am33xx_cpu_suspend,
.begin_suspend = amx3_begin_suspend,
.finish_suspend = amx3_finish_suspend,
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am33xx_save_context,
.restore_context = am33xx_restore_context,
@ -265,7 +325,11 @@ static struct am33xx_pm_platform_data am33xx_ops = {
static struct am33xx_pm_platform_data am43xx_ops = {
.init = am43xx_suspend_init,
.deinit = amx3_suspend_deinit,
.soc_suspend = am43xx_suspend,
.cpu_suspend = am43xx_cpu_suspend,
.begin_suspend = amx3_begin_suspend,
.finish_suspend = amx3_finish_suspend,
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am43xx_save_context,
.restore_context = am43xx_restore_context,
@ -301,3 +365,64 @@ int __init amx3_common_pm_init(void)
return 0;
}
static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
{
struct device_node *state_node;
struct amx3_idle_state states[CPUIDLE_STATE_MAX];
int i;
int state_count = 1;
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)
break;
if (!of_device_is_available(state_node))
continue;
if (i == CPUIDLE_STATE_MAX) {
pr_warn("%s: cpuidle states reached max possible\n",
__func__);
break;
}
states[state_count].wfi_flags = 0;
if (of_property_read_bool(state_node, "ti,idle-wkup-m3"))
states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
WFI_FLAG_FLUSH_CACHE;
state_count++;
}
idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL);
if (!idle_states)
return -ENOMEM;
for (i = 1; i < state_count; i++)
idle_states[i].wfi_flags = states[i].wfi_flags;
return 0;
}
static int amx3_idle_enter(unsigned long index)
{
struct amx3_idle_state *idle_state = &idle_states[index];
if (!idle_state)
return -EINVAL;
if (idle_fn)
idle_fn(idle_state->wfi_flags);
return 0;
}
static struct cpuidle_ops amx3_cpuidle_ops __initdata = {
.init = amx3_idle_init,
.suspend = amx3_idle_enter,
};
CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops);
CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops);

11
arch/arm/mach-omap2/timer.c
View File

@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction omap2_gp_timer_irq = {
.name = "gp_timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = omap2_gp_timer_interrupt,
};
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
&clockevent_gpt.name, OMAP_TIMER_POSTED);
BUG_ON(res);
omap2_gp_timer_irq.dev_id = &clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq);
__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);

2
arch/arm/mach-orion5x/Kconfig
View File

@ -3,7 +3,6 @@ menuconfig ARCH_ORION5X
bool "Marvell Orion"
depends on MMU && ARCH_MULTI_V5
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MVEBU_MBUS
select FORCE_PCI
@ -18,7 +17,6 @@ if ARCH_ORION5X
config ARCH_ORION5X_DT
bool "Marvell Orion5x Flattened Device Tree"
select USE_OF
select ORION_CLK
select ORION_IRQCHIP
select ORION_TIMER

3
arch/arm/mach-orion5x/ts78xx-setup.c
View File

@ -398,7 +398,6 @@ static int ts78xx_fpga_load_devices(void)
static int ts78xx_fpga_unload_devices(void)
{
int ret = 0;
if (ts78xx_fpga.supports.ts_rtc.present == 1)
ts78xx_ts_rtc_unload();
@ -407,7 +406,7 @@ static int ts78xx_fpga_unload_devices(void)
if (ts78xx_fpga.supports.ts_rng.present == 1)
ts78xx_ts_rng_unload();
return ret;
return 0;
}
static int ts78xx_fpga_load(void)

5
arch/arm/mach-qcom/Kconfig
View File

@ -12,6 +12,11 @@ menuconfig ARCH_QCOM
if ARCH_QCOM
config ARCH_IPQ40XX
bool "Enable support for IPQ40XX"
select CLKSRC_QCOM
select HAVE_ARM_ARCH_TIMER
config ARCH_MSM8X60
bool "Enable support for MSM8X60"
select CLKSRC_QCOM

1
arch/arm/mach-shmobile/setup-r8a7779.c
View File

@ -72,7 +72,6 @@ static const char *const r8a7779_compat_dt[] __initconst = {
DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
.smp = smp_ops(r8a7779_smp_ops),
.map_io = r8a7779_map_io,
.init_early = shmobile_init_delay,
.init_irq = r8a7779_init_irq_dt,
.init_late = shmobile_init_late,
.dt_compat = r8a7779_compat_dt,

2
arch/arm/mach-shmobile/setup-rcar-gen2.c
View File

@ -7,7 +7,6 @@
* Copyright (C) 2014 Ulrich Hecht
*/
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/device.h>
#include <linux/dma-contiguous.h>
@ -15,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/memblock.h>
#include <linux/of.h>
#include <linux/of_clk.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/psci.h>

1
arch/arm/mach-shmobile/setup-sh73a0.c
View File

@ -56,7 +56,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = {
DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = shmobile_init_delay,
.init_machine = sh73a0_generic_init,
.init_late = shmobile_init_late,
.dt_compat = sh73a0_boards_compat_dt,

9
arch/arm/mach-spear/time.c
View File

@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction spear_timer_irq = {
.name = "timer",
.flags = IRQF_TIMER,
.handler = spear_timer_interrupt
};
static void __init spear_clockevent_init(int irq)
{
u32 tick_rate;
@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq)
clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
setup_irq(irq, &spear_timer_irq);
if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL))
pr_err("Failed to request irq %d (timer)\n", irq);
}
static const struct of_device_id timer_of_match[] __initconst = {

2
arch/arm/mach-sunxi/sunxi.c
View File

@ -10,9 +10,9 @@
* warranty of any kind, whether express or implied.
*/
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/of_clk.h>
#include <linux/platform_device.h>
#include <linux/reset/sunxi.h>

19
arch/arm/mach-tegra/Makefile
View File

@ -8,29 +8,14 @@ obj-y += reset.o
obj-y += reset-handler.o
obj-y += sleep.o
obj-y += tegra.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o
obj-y += sleep-tegra20.o
obj-y += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o
endif
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o
endif
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o
endif
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += cpuidle-tegra114.o
endif
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o

89
arch/arm/mach-tegra/cpuidle-tegra114.c
View File

@ -1,89 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
*/
#include <asm/firmware.h>
#include <linux/tick.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/firmware/trusted_foundations.h>
#include <asm/cpuidle.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/psci.h>
#include "cpuidle.h"
#include "pm.h"
#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
#define TEGRA114_MAX_STATES 2
#else
#define TEGRA114_MAX_STATES 1
#endif
#ifdef CONFIG_PM_SLEEP
static int tegra114_idle_power_down(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
local_fiq_disable();
tegra_set_cpu_in_lp2();
cpu_pm_enter();
call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
/* Do suspend by ourselves if the firmware does not implement it */
if (call_firmware_op(do_idle, 0) == -ENOSYS)
cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
cpu_pm_exit();
tegra_clear_cpu_in_lp2();
local_fiq_enable();
return index;
}
static void tegra114_idle_enter_s2idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
tegra114_idle_power_down(dev, drv, index);
}
#endif
static struct cpuidle_driver tegra_idle_driver = {
.name = "tegra_idle",
.owner = THIS_MODULE,
.state_count = TEGRA114_MAX_STATES,
.states = {
[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
#ifdef CONFIG_PM_SLEEP
[1] = {
.enter = tegra114_idle_power_down,
.enter_s2idle = tegra114_idle_enter_s2idle,
.exit_latency = 500,
.target_residency = 1000,
.flags = CPUIDLE_FLAG_TIMER_STOP,
.power_usage = 0,
.name = "powered-down",
.desc = "CPU power gated",
},
#endif
},
};
int __init tegra114_cpuidle_init(void)
{
if (!psci_smp_available())
return cpuidle_register(&tegra_idle_driver, NULL);
return 0;
}

212
arch/arm/mach-tegra/cpuidle-tegra20.c
View File

@ -1,212 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* CPU idle driver for Tegra CPUs
*
* Copyright (c) 2010-2012, NVIDIA Corporation.
* Copyright (c) 2011 Google, Inc.
* Author: Colin Cross <ccross@android.com>
* Gary King <gking@nvidia.com>
*
* Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
*/
#include <linux/clk/tegra.h>
#include <linux/tick.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <soc/tegra/flowctrl.h>
#include <asm/cpuidle.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include "cpuidle.h"
#include "iomap.h"
#include "irq.h"
#include "pm.h"
#include "reset.h"
#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
static bool abort_flag;
static atomic_t abort_barrier;
static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
#define TEGRA20_MAX_STATES 2
#else
#define TEGRA20_MAX_STATES 1
#endif
static struct cpuidle_driver tegra_idle_driver = {
.name = "tegra_idle",
.owner = THIS_MODULE,
.states = {
ARM_CPUIDLE_WFI_STATE_PWR(600),
#ifdef CONFIG_PM_SLEEP
{
.enter = tegra20_idle_lp2_coupled,
.exit_latency = 5000,
.target_residency = 10000,
.power_usage = 0,
.flags = CPUIDLE_FLAG_COUPLED |
CPUIDLE_FLAG_TIMER_STOP,
.name = "powered-down",
.desc = "CPU power gated",
},
#endif
},
.state_count = TEGRA20_MAX_STATES,
.safe_state_index = 0,
};
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_SMP
static int tegra20_reset_sleeping_cpu_1(void)
{
int ret = 0;
tegra_pen_lock();
if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE)
tegra20_cpu_shutdown(1);
else
ret = -EINVAL;
tegra_pen_unlock();
return ret;
}
static void tegra20_wake_cpu1_from_reset(void)
{
tegra_pen_lock();
tegra20_cpu_clear_resettable();
/* enable cpu clock on cpu */
tegra_enable_cpu_clock(1);
/* take the CPU out of reset */
tegra_cpu_out_of_reset(1);
/* unhalt the cpu */
flowctrl_write_cpu_halt(1, 0);
tegra_pen_unlock();
}
static int tegra20_reset_cpu_1(void)
{
if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1())
return 0;
tegra20_wake_cpu1_from_reset();
return -EBUSY;
}
#else
static inline void tegra20_wake_cpu1_from_reset(void)
{
}
static inline int tegra20_reset_cpu_1(void)
{
return 0;
}
#endif
static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
while (tegra20_cpu_is_resettable_soon())
cpu_relax();
if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready())
return false;
tegra_idle_lp2_last();
if (cpu_online(1))
tegra20_wake_cpu1_from_reset();
return true;
}
#ifdef CONFIG_SMP
static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
cpu_suspend(0, tegra20_sleep_cpu_secondary_finish);
tegra20_cpu_clear_resettable();
return true;
}
#else
static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
return true;
}
#endif
static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
bool entered_lp2 = false;
if (tegra_pending_sgi())
WRITE_ONCE(abort_flag, true);
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
if (abort_flag) {
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
abort_flag = false; /* clean flag for next coming */
return -EINTR;
}
local_fiq_disable();
tegra_set_cpu_in_lp2();
cpu_pm_enter();
if (dev->cpu == 0)
entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index);
else
entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index);
cpu_pm_exit();
tegra_clear_cpu_in_lp2();
local_fiq_enable();
smp_rmb();
return entered_lp2 ? index : 0;
}
#endif
/*
* Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
* they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around
* this, simply disable LP2 if the PCI driver and DT node are both enabled.
*/
void tegra20_cpuidle_pcie_irqs_in_use(void)
{
pr_info_once(
"Disabling cpuidle LP2 state, since PCIe IRQs are in use\n");
cpuidle_driver_state_disabled(&tegra_idle_driver, 1, true);
}
int __init tegra20_cpuidle_init(void)
{
return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
}

132
arch/arm/mach-tegra/cpuidle-tegra30.c
View File

@ -1,132 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* CPU idle driver for Tegra CPUs
*
* Copyright (c) 2010-2012, NVIDIA Corporation.
* Copyright (c) 2011 Google, Inc.
* Author: Colin Cross <ccross@android.com>
* Gary King <gking@nvidia.com>
*
* Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
*/
#include <linux/clk/tegra.h>
#include <linux/tick.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/cpuidle.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include "cpuidle.h"
#include "pm.h"
#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
static int tegra30_idle_lp2(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
#endif
static struct cpuidle_driver tegra_idle_driver = {
.name = "tegra_idle",
.owner = THIS_MODULE,
#ifdef CONFIG_PM_SLEEP
.state_count = 2,
#else
.state_count = 1,
#endif
.states = {
[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
#ifdef CONFIG_PM_SLEEP
[1] = {
.enter = tegra30_idle_lp2,
.exit_latency = 2000,
.target_residency = 2200,
.power_usage = 0,
.flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "powered-down",
.desc = "CPU power gated",
},
#endif
},
};
#ifdef CONFIG_PM_SLEEP
static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
/* All CPUs entering LP2 is not working.
* Don't let CPU0 enter LP2 when any secondary CPU is online.
*/
if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) {
cpu_do_idle();
return false;
}
tegra_idle_lp2_last();
return true;
}
#ifdef CONFIG_SMP
static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
smp_wmb();
cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
return true;
}
#else
static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
return true;
}
#endif
static int tegra30_idle_lp2(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
bool entered_lp2 = false;
bool last_cpu;
local_fiq_disable();
last_cpu = tegra_set_cpu_in_lp2();
cpu_pm_enter();
if (dev->cpu == 0) {
if (last_cpu)
entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv,
index);
else
cpu_do_idle();
} else {
entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index);
}
cpu_pm_exit();
tegra_clear_cpu_in_lp2();
local_fiq_enable();
smp_rmb();
return (entered_lp2) ? index : 0;
}
#endif
int __init tegra30_cpuidle_init(void)
{
return cpuidle_register(&tegra_idle_driver, NULL);
}

50
arch/arm/mach-tegra/cpuidle.c
View File

@ -1,50 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/arm/mach-tegra/cpuidle.c
*
* CPU idle driver for Tegra CPUs
*
* Copyright (c) 2010-2012, NVIDIA Corporation.
* Copyright (c) 2011 Google, Inc.
* Author: Colin Cross <ccross@android.com>
* Gary King <gking@nvidia.com>
*
* Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <soc/tegra/fuse.h>
#include "cpuidle.h"
void __init tegra_cpuidle_init(void)
{
switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_cpuidle_init();
break;
case TEGRA30:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC))
tegra30_cpuidle_init();
break;
case TEGRA114:
case TEGRA124:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
tegra114_cpuidle_init();
break;
}
}
void tegra_cpuidle_pcie_irqs_in_use(void)
{
switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_cpuidle_pcie_irqs_in_use();
break;
}
}

21
arch/arm/mach-tegra/cpuidle.h
View File

@ -1,21 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
*/
#ifndef __MACH_TEGRA_CPUIDLE_H
#define __MACH_TEGRA_CPUIDLE_H
#ifdef CONFIG_CPU_IDLE
int tegra20_cpuidle_init(void);
void tegra20_cpuidle_pcie_irqs_in_use(void);
int tegra30_cpuidle_init(void);
int tegra114_cpuidle_init(void);
void tegra_cpuidle_init(void);
void tegra_cpuidle_pcie_irqs_in_use(void);
#else
static inline void tegra_cpuidle_init(void) {}
static inline void tegra_cpuidle_pcie_irqs_in_use(void) {}
#endif
#endif

3
arch/arm/mach-tegra/irq.c
View File

@ -18,9 +18,10 @@
#include <linux/of.h>
#include <linux/syscore_ops.h>
#include <soc/tegra/irq.h>
#include "board.h"
#include "iomap.h"
#include "irq.h"
#define SGI_MASK 0xFFFF

54
arch/arm/mach-tegra/pm.c
View File

@ -110,7 +110,7 @@ static void suspend_cpu_complex(void)
flowctrl_cpu_suspend_enter(cpu);
}
void tegra_clear_cpu_in_lp2(void)
void tegra_pm_clear_cpu_in_lp2(void)
{
int phy_cpu_id = cpu_logical_map(smp_processor_id());
u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
@ -123,11 +123,9 @@ void tegra_clear_cpu_in_lp2(void)
spin_unlock(&tegra_lp2_lock);
}
bool tegra_set_cpu_in_lp2(void)
void tegra_pm_set_cpu_in_lp2(void)
{
int phy_cpu_id = cpu_logical_map(smp_processor_id());
bool last_cpu = false;
cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
spin_lock(&tegra_lp2_lock);
@ -135,22 +133,15 @@ bool tegra_set_cpu_in_lp2(void)
BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id)));
*cpu_in_lp2 |= BIT(phy_cpu_id);
if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
last_cpu = true;
else if (tegra_get_chip_id() == TEGRA20 && phy_cpu_id == 1)
tegra20_cpu_set_resettable_soon();
spin_unlock(&tegra_lp2_lock);
return last_cpu;
}
int tegra_cpu_do_idle(void)
{
return cpu_do_idle();
}
static int tegra_sleep_cpu(unsigned long v2p)
{
if (tegra_cpu_car_ops->rail_off_ready &&
WARN_ON(!tegra_cpu_rail_off_ready()))
return -EBUSY;
/*
* L2 cache disabling using kernel API only allowed when all
* secondary CPU's are offline. Cache have to be disabled with
@ -159,9 +150,10 @@ static int tegra_sleep_cpu(unsigned long v2p)
* if any of secondary CPU's is online and this is the LP2-idle
* code-path only for Tegra20/30.
*/
if (trusted_foundations_registered())
outer_disable();
#ifdef CONFIG_OUTER_CACHE
if (trusted_foundations_registered() && outer_cache.disable)
outer_cache.disable();
#endif
/*
* Note that besides of setting up CPU reset vector this firmware
* call may also do the following, depending on the FW version:
@ -202,14 +194,16 @@ static void tegra_pm_set(enum tegra_suspend_mode mode)
tegra_pmc_enter_suspend_mode(mode);
}
void tegra_idle_lp2_last(void)
int tegra_pm_enter_lp2(void)
{
int err;
tegra_pm_set(TEGRA_SUSPEND_LP2);
cpu_cluster_pm_enter();
suspend_cpu_complex();
cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
/*
* Resume L2 cache if it wasn't re-enabled early during resume,
@ -221,6 +215,8 @@ void tegra_idle_lp2_last(void)
restore_cpu_complex();
cpu_cluster_pm_exit();
return err;
}
enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
@ -365,7 +361,7 @@ static int tegra_suspend_enter(suspend_state_t state)
tegra_suspend_enter_lp1();
break;
case TEGRA_SUSPEND_LP2:
tegra_set_cpu_in_lp2();
tegra_pm_set_cpu_in_lp2();
break;
default:
break;
@ -386,7 +382,7 @@ static int tegra_suspend_enter(suspend_state_t state)
tegra_suspend_exit_lp1();
break;
case TEGRA_SUSPEND_LP2:
tegra_clear_cpu_in_lp2();
tegra_pm_clear_cpu_in_lp2();
break;
default:
break;
@ -436,4 +432,18 @@ void __init tegra_init_suspend(void)
suspend_set_ops(&tegra_suspend_ops);
}
int tegra_pm_park_secondary_cpu(unsigned long cpu)
{
if (cpu > 0) {
tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
if (tegra_get_chip_id() == TEGRA20)
tegra20_hotplug_shutdown();
else
tegra30_hotplug_shutdown();
}
return -EINVAL;
}
#endif

4
arch/arm/mach-tegra/pm.h
View File

@ -23,10 +23,6 @@ void tegra20_sleep_core_init(void);
void tegra30_lp1_iram_hook(void);
void tegra30_sleep_core_init(void);
void tegra_clear_cpu_in_lp2(void);
bool tegra_set_cpu_in_lp2(void);
int tegra_cpu_do_idle(void);
void tegra_idle_lp2_last(void);
extern void (*tegra_tear_down_cpu)(void);
#ifdef CONFIG_PM_SLEEP

11
arch/arm/mach-tegra/reset-handler.S
View File

@ -183,17 +183,6 @@ after_errata:
bleq __die @ CPU not present (to OS)
#endif
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
/* Are we on Tegra20? */
cmp r6, #TEGRA20
bne 1f
/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
mov r0, #CPU_NOT_RESETTABLE
cmp r10, #0
strbne r0, [r12, #RESET_DATA(RESETTABLE_STATUS)]
1:
#endif
/* Waking up from LP1? */
ldr r8, [r12, #RESET_DATA(MASK_LP1)]
tst r8, r11 @ if in_lp1

9
arch/arm/mach-tegra/reset.h
View File

@ -16,9 +16,8 @@
#define TEGRA_RESET_STARTUP_SECONDARY 3
#define TEGRA_RESET_STARTUP_LP2 4
#define TEGRA_RESET_STARTUP_LP1 5
#define TEGRA_RESET_RESETTABLE_STATUS 6
#define TEGRA_RESET_TF_PRESENT 7
#define TEGRA_RESET_DATA_SIZE 8
#define TEGRA_RESET_TF_PRESENT 6
#define TEGRA_RESET_DATA_SIZE 7
#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
@ -42,10 +41,6 @@ void __tegra_cpu_reset_handler_end(void);
(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
(u32)__tegra_cpu_reset_handler_start)))
#define tegra20_cpu1_resettable_status \
(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \
(u32)__tegra_cpu_reset_handler_start)))
#endif
#define tegra_cpu_reset_handler_offset \

170
arch/arm/mach-tegra/sleep-tegra20.S
View File

@ -43,9 +43,6 @@
#define APB_MISC_XM2CFGCPADCTRL2 0x8e4
#define APB_MISC_XM2CFGDPADCTRL2 0x8e8
#define __tegra20_cpu1_resettable_status_offset \
(__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS))
.macro pll_enable, rd, r_car_base, pll_base
ldr \rd, [\r_car_base, #\pll_base]
tst \rd, #(1 << 30)
@ -90,10 +87,6 @@ ENDPROC(tegra20_hotplug_shutdown)
ENTRY(tegra20_cpu_shutdown)
cmp r0, #0
reteq lr @ must not be called for CPU 0
mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
ldr r2, =__tegra20_cpu1_resettable_status_offset
mov r12, #CPU_RESETTABLE
strb r12, [r1, r2]
cpu_to_halt_reg r1, r0
ldr r3, =TEGRA_FLOW_CTRL_VIRT
@ -116,107 +109,6 @@ ENDPROC(tegra20_cpu_shutdown)
#endif
#ifdef CONFIG_PM_SLEEP
/*
* tegra_pen_lock
*
* spinlock implementation with no atomic test-and-set and no coherence
* using Peterson's algorithm on strongly-ordered registers
* used to synchronize a cpu waking up from wfi with entering lp2 on idle
*
* The reference link of Peterson's algorithm:
* http://en.wikipedia.org/wiki/Peterson's_algorithm
*
* SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm)
* on cpu 0:
* r2 = flag[0] (in SCRATCH38)
* r3 = flag[1] (in SCRATCH39)
* on cpu1:
* r2 = flag[1] (in SCRATCH39)
* r3 = flag[0] (in SCRATCH38)
*
* must be called with MMU on
* corrupts r0-r3, r12
*/
ENTRY(tegra_pen_lock)
mov32 r3, TEGRA_PMC_VIRT
cpu_id r0
add r1, r3, #PMC_SCRATCH37
cmp r0, #0
addeq r2, r3, #PMC_SCRATCH38
addeq r3, r3, #PMC_SCRATCH39
addne r2, r3, #PMC_SCRATCH39
addne r3, r3, #PMC_SCRATCH38
mov r12, #1
str r12, [r2] @ flag[cpu] = 1
dsb
str r12, [r1] @ !turn = cpu
1: dsb
ldr r12, [r3]
cmp r12, #1 @ flag[!cpu] == 1?
ldreq r12, [r1]
cmpeq r12, r0 @ !turn == cpu?
beq 1b @ while !turn == cpu && flag[!cpu] == 1
ret lr @ locked
ENDPROC(tegra_pen_lock)
ENTRY(tegra_pen_unlock)
dsb
mov32 r3, TEGRA_PMC_VIRT
cpu_id r0
cmp r0, #0
addeq r2, r3, #PMC_SCRATCH38
addne r2, r3, #PMC_SCRATCH39
mov r12, #0
str r12, [r2]
ret lr
ENDPROC(tegra_pen_unlock)
/*
* tegra20_cpu_clear_resettable(void)
*
* Called to clear the "resettable soon" flag in IRAM variable when
* it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_clear_resettable)
mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
ldr r2, =__tegra20_cpu1_resettable_status_offset
mov r12, #CPU_NOT_RESETTABLE
strb r12, [r1, r2]
ret lr
ENDPROC(tegra20_cpu_clear_resettable)
/*
* tegra20_cpu_set_resettable_soon(void)
*
* Called to set the "resettable soon" flag in IRAM variable when
* it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_set_resettable_soon)
mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
ldr r2, =__tegra20_cpu1_resettable_status_offset
mov r12, #CPU_RESETTABLE_SOON
strb r12, [r1, r2]
ret lr
ENDPROC(tegra20_cpu_set_resettable_soon)
/*
* tegra20_cpu_is_resettable_soon(void)
*
* Returns true if the "resettable soon" flag in IRAM variable has been
* set because it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_is_resettable_soon)
mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
ldr r2, =__tegra20_cpu1_resettable_status_offset
ldrb r12, [r1, r2]
cmp r12, #CPU_RESETTABLE_SOON
moveq r0, #1
movne r0, #0
ret lr
ENDPROC(tegra20_cpu_is_resettable_soon)
/*
* tegra20_sleep_core_finish(unsigned long v2p)
*
@ -242,68 +134,6 @@ ENTRY(tegra20_sleep_core_finish)
ret r3
ENDPROC(tegra20_sleep_core_finish)
/*
* tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
*
* Enters WFI on secondary CPU by exiting coherency.
*/
ENTRY(tegra20_sleep_cpu_secondary_finish)
stmfd sp!, {r4-r11, lr}
mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency
/* Flush and disable the L1 data cache */
mov r0, #TEGRA_FLUSH_CACHE_LOUIS
bl tegra_disable_clean_inv_dcache
mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT
ldr r4, =__tegra20_cpu1_resettable_status_offset
mov r3, #CPU_RESETTABLE
strb r3, [r0, r4]
bl tegra_cpu_do_idle
/*
* cpu may be reset while in wfi, which will return through
* tegra_resume to cpu_resume
* or interrupt may wake wfi, which will return here
* cpu state is unchanged - MMU is on, cache is on, coherency
* is off, and the data cache is off
*
* r11 contains the original actlr
*/
bl tegra_pen_lock
mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT
ldr r4, =__tegra20_cpu1_resettable_status_offset
mov r3, #CPU_NOT_RESETTABLE
strb r3, [r0, r4]
bl tegra_pen_unlock
/* Re-enable the data cache */
mrc p15, 0, r10, c1, c0, 0
orr r10, r10, #CR_C
mcr p15, 0, r10, c1, c0, 0
isb
mcr p15, 0, r11, c1, c0, 1 @ reenable coherency
/* Invalidate the TLBs & BTAC */
mov r1, #0
mcr p15, 0, r1, c8, c3, 0 @ invalidate shared TLBs
mcr p15, 0, r1, c7, c1, 6 @ invalidate shared BTAC
dsb
isb
/* the cpu was running with coherency disabled,
* caches may be out of date */
bl v7_flush_kern_cache_louis
ldmfd sp!, {r4 - r11, pc}
ENDPROC(tegra20_sleep_cpu_secondary_finish)
/*
* tegra20_tear_down_cpu
*

6
arch/arm/mach-tegra/sleep-tegra30.S
View File

@ -265,11 +265,11 @@ ENTRY(tegra30_sleep_core_finish)
ENDPROC(tegra30_sleep_core_finish)
/*
* tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
* tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg)
*
* Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
*/
ENTRY(tegra30_sleep_cpu_secondary_finish)
ENTRY(tegra30_pm_secondary_cpu_suspend)
mov r7, lr
/* Flush and disable the L1 data cache */
@ -281,7 +281,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish)
bl tegra30_cpu_shutdown
mov r0, #1 @ never return here
ret r7
ENDPROC(tegra30_sleep_cpu_secondary_finish)
ENDPROC(tegra30_pm_secondary_cpu_suspend)
/*
* tegra30_tear_down_cpu

15
arch/arm/mach-tegra/sleep.h
View File

@ -114,29 +114,14 @@
.endm
#else
void tegra_pen_lock(void);
void tegra_pen_unlock(void);
void tegra_resume(void);
int tegra_sleep_cpu_finish(unsigned long);
void tegra_disable_clean_inv_dcache(u32 flag);
#ifdef CONFIG_HOTPLUG_CPU
void tegra20_hotplug_shutdown(void);
void tegra30_hotplug_shutdown(void);
#endif
void tegra20_cpu_shutdown(int cpu);
int tegra20_cpu_is_resettable_soon(void);
void tegra20_cpu_clear_resettable(void);
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void tegra20_cpu_set_resettable_soon(void);
#else
static inline void tegra20_cpu_set_resettable_soon(void) {}
#endif
int tegra20_sleep_cpu_secondary_finish(unsigned long);
void tegra20_tear_down_cpu(void);
int tegra30_sleep_cpu_secondary_finish(unsigned long);
void tegra30_tear_down_cpu(void);
#endif

7
arch/arm/mach-tegra/tegra.c
View File

@ -36,13 +36,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/psci.h>
#include <asm/setup.h>
#include "board.h"
#include "common.h"
#include "cpuidle.h"
#include "iomap.h"
#include "irq.h"
#include "pm.h"
#include "reset.h"
#include "sleep.h"
@ -86,7 +85,6 @@ static void __init tegra_dt_init(void)
static void __init tegra_dt_init_late(void)
{
tegra_init_suspend();
tegra_cpuidle_init();
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
of_machine_is_compatible("compal,paz00"))
@ -95,6 +93,9 @@ static void __init tegra_dt_init_late(void)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
of_machine_is_compatible("nvidia,tegra20"))
platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0);
if (IS_ENABLED(CONFIG_ARM_TEGRA_CPUIDLE) && !psci_smp_available())
platform_device_register_simple("tegra-cpuidle", -1, NULL, 0);
}
static const char * const tegra_dt_board_compat[] = {

2
arch/arm/mach-zynq/common.c
View File

@ -12,10 +12,10 @@
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/zynq.h>
#include <linux/clocksource.h>
#include <linux/of_address.h>
#include <linux/of_clk.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>

10
arch/arm/plat-orion/time.c
View File

@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction orion_timer_irq = {
.name = "orion_tick",
.flags = IRQF_TIMER,
.handler = orion_timer_interrupt
};
void __init
orion_time_set_base(void __iomem *_timer_base)
{
@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
/*
* Setup clockevent timer (interrupt-driven).
*/
setup_irq(irq, &orion_timer_irq);
if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick",
NULL))
pr_err("Failed to request irq %u (orion_tick)\n", irq);
orion_clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
}

2
arch/arm64/Kconfig.platforms
View File

@ -39,7 +39,6 @@ config ARCH_BCM2835
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select HAVE_ARM_ARCH_TIMER
help
This enables support for the Broadcom BCM2837 and BCM2711 SoC.
These SoCs are used in the Raspberry Pi 3 and 4 devices.
@ -301,7 +300,6 @@ config ARCH_ZX
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
select ZYNQMP_FIRMWARE
help
This enables support for Xilinx ZynqMP Family

91
drivers/clk/at91/clk-sam9x60-pll.c
View File

@ -14,27 +14,8 @@
#include "pmc.h"
#define PMC_PLL_CTRL0 0xc
#define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0)
#define PMC_PLL_CTRL0_ENPLL BIT(28)
#define PMC_PLL_CTRL0_ENPLLCK BIT(29)
#define PMC_PLL_CTRL0_ENLOCK BIT(31)
#define PMC_PLL_CTRL1 0x10
#define PMC_PLL_CTRL1_FRACR_MSK GENMASK(21, 0)
#define PMC_PLL_CTRL1_MUL_MSK GENMASK(30, 24)
#define PMC_PLL_ACR 0x18
#define PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL
#define PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL
#define PMC_PLL_ACR_UTMIVR BIT(12)
#define PMC_PLL_ACR_UTMIBG BIT(13)
#define PMC_PLL_ACR_LOOP_FILTER_MSK GENMASK(31, 24)
#define PMC_PLL_UPDT 0x1c
#define PMC_PLL_UPDT_UPDATE BIT(8)
#define PMC_PLL_ISR0 0xec
#define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0)
#define PMC_PLL_CTRL1_MUL_MSK GENMASK(30, 24)
#define PLL_DIV_MAX (FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1)
#define UPLL_DIV 2
@ -59,7 +40,7 @@ static inline bool sam9x60_pll_ready(struct regmap *regmap, int id)
{
unsigned int status;
regmap_read(regmap, PMC_PLL_ISR0, &status);
regmap_read(regmap, AT91_PMC_PLL_ISR0, &status);
return !!(status & BIT(id));
}
@ -74,12 +55,12 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
u32 val;
spin_lock_irqsave(pll->lock, flags);
regmap_write(regmap, PMC_PLL_UPDT, pll->id);
regmap_write(regmap, AT91_PMC_PLL_UPDT, pll->id);
regmap_read(regmap, PMC_PLL_CTRL0, &val);
regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val);
regmap_read(regmap, PMC_PLL_CTRL1, &val);
regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val);
mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, val);
if (sam9x60_pll_ready(regmap, pll->id) &&
@ -88,39 +69,39 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
return 0;
}
/* Recommended value for PMC_PLL_ACR */
/* Recommended value for AT91_PMC_PLL_ACR */
if (pll->characteristics->upll)
val = PMC_PLL_ACR_DEFAULT_UPLL;
val = AT91_PMC_PLL_ACR_DEFAULT_UPLL;
else
val = PMC_PLL_ACR_DEFAULT_PLLA;
regmap_write(regmap, PMC_PLL_ACR, val);
val = AT91_PMC_PLL_ACR_DEFAULT_PLLA;
regmap_write(regmap, AT91_PMC_PLL_ACR, val);
regmap_write(regmap, PMC_PLL_CTRL1,
regmap_write(regmap, AT91_PMC_PLL_CTRL1,
FIELD_PREP(PMC_PLL_CTRL1_MUL_MSK, pll->mul));
if (pll->characteristics->upll) {
/* Enable the UTMI internal bandgap */
val |= PMC_PLL_ACR_UTMIBG;
regmap_write(regmap, PMC_PLL_ACR, val);
val |= AT91_PMC_PLL_ACR_UTMIBG;
regmap_write(regmap, AT91_PMC_PLL_ACR, val);
udelay(10);
/* Enable the UTMI internal regulator */
val |= PMC_PLL_ACR_UTMIVR;
regmap_write(regmap, PMC_PLL_ACR, val);
val |= AT91_PMC_PLL_ACR_UTMIVR;
regmap_write(regmap, AT91_PMC_PLL_ACR, val);
udelay(10);
}
regmap_update_bits(regmap, PMC_PLL_UPDT,
PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
regmap_write(regmap, PMC_PLL_CTRL0,
PMC_PLL_CTRL0_ENLOCK | PMC_PLL_CTRL0_ENPLL |
PMC_PLL_CTRL0_ENPLLCK | pll->div);
regmap_write(regmap, AT91_PMC_PLL_CTRL0,
AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL |
AT91_PMC_PLL_CTRL0_ENPLLCK | pll->div);
regmap_update_bits(regmap, PMC_PLL_UPDT,
PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
while (!sam9x60_pll_ready(regmap, pll->id))
cpu_relax();
@ -144,22 +125,24 @@ static void sam9x60_pll_unprepare(struct clk_hw *hw)
spin_lock_irqsave(pll->lock, flags);
regmap_write(pll->regmap, PMC_PLL_UPDT, pll->id);
regmap_write(pll->regmap, AT91_PMC_PLL_UPDT, pll->id);
regmap_update_bits(pll->regmap, PMC_PLL_CTRL0,
PMC_PLL_CTRL0_ENPLLCK, 0);
regmap_update_bits(pll->regmap, AT91_PMC_PLL_CTRL0,
AT91_PMC_PLL_CTRL0_ENPLLCK, 0);
regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
regmap_update_bits(pll->regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
regmap_update_bits(pll->regmap, PMC_PLL_CTRL0, PMC_PLL_CTRL0_ENPLL, 0);
regmap_update_bits(pll->regmap, AT91_PMC_PLL_CTRL0,
AT91_PMC_PLL_CTRL0_ENPLL, 0);
if (pll->characteristics->upll)
regmap_update_bits(pll->regmap, PMC_PLL_ACR,
PMC_PLL_ACR_UTMIBG | PMC_PLL_ACR_UTMIVR, 0);
regmap_update_bits(pll->regmap, AT91_PMC_PLL_ACR,
AT91_PMC_PLL_ACR_UTMIBG |
AT91_PMC_PLL_ACR_UTMIVR, 0);
regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
regmap_update_bits(pll->regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_UPDATE, AT91_PMC_PLL_UPDT_UPDATE);
spin_unlock_irqrestore(pll->lock, flags);
}
@ -316,10 +299,10 @@ sam9x60_clk_register_pll(struct regmap *regmap, spinlock_t *lock,
pll->regmap = regmap;
pll->lock = lock;
regmap_write(regmap, PMC_PLL_UPDT, id);
regmap_read(regmap, PMC_PLL_CTRL0, &pllr);
regmap_write(regmap, AT91_PMC_PLL_UPDT, id);
regmap_read(regmap, AT91_PMC_PLL_CTRL0, &pllr);
pll->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, pllr);
regmap_read(regmap, PMC_PLL_CTRL1, &pllr);
regmap_read(regmap, AT91_PMC_PLL_CTRL1, &pllr);
pll->mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, pllr);
hw = &pll->hw;

8
drivers/cpuidle/Kconfig.arm
View File

@ -86,3 +86,11 @@ config ARM_MVEBU_V7_CPUIDLE
depends on (ARCH_MVEBU || COMPILE_TEST) && !ARM64
help
Select this to enable cpuidle on Armada 370, 38x and XP processors.
config ARM_TEGRA_CPUIDLE
bool "CPU Idle Driver for NVIDIA Tegra SoCs"
depends on ARCH_TEGRA && !ARM64
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND
help
Select this to enable cpuidle for NVIDIA Tegra20/30/114/124 SoCs.

1
drivers/cpuidle/Makefile
View File

@ -24,6 +24,7 @@ obj-$(CONFIG_ARM_CPUIDLE) += cpuidle-arm.o
obj-$(CONFIG_ARM_PSCI_CPUIDLE) += cpuidle_psci.o
cpuidle_psci-y := cpuidle-psci.o
cpuidle_psci-$(CONFIG_PM_GENERIC_DOMAINS_OF) += cpuidle-psci-domain.o
obj-$(CONFIG_ARM_TEGRA_CPUIDLE) += cpuidle-tegra.o
###############################################################################
# MIPS drivers

392
drivers/cpuidle/cpuidle-tegra.c 100644
View File

@ -0,0 +1,392 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* CPU idle driver for Tegra CPUs
*
* Copyright (c) 2010-2013, NVIDIA Corporation.
* Copyright (c) 2011 Google, Inc.
* Author: Colin Cross <ccross@android.com>
* Gary King <gking@nvidia.com>
*
* Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
*
* Tegra20/124 driver unification by Dmitry Osipenko <digetx@gmail.com>
*/
#define pr_fmt(fmt) "tegra-cpuidle: " fmt
#include <linux/atomic.h>
#include <linux/cpuidle.h>
#include <linux/cpumask.h>
#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/clk/tegra.h>
#include <linux/firmware/trusted_foundations.h>
#include <soc/tegra/cpuidle.h>
#include <soc/tegra/flowctrl.h>
#include <soc/tegra/fuse.h>
#include <soc/tegra/irq.h>
#include <soc/tegra/pm.h>
#include <soc/tegra/pmc.h>
#include <asm/cpuidle.h>
#include <asm/firmware.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
enum tegra_state {
TEGRA_C1,
TEGRA_C7,
TEGRA_CC6,
TEGRA_STATE_COUNT,
};
static atomic_t tegra_idle_barrier;
static atomic_t tegra_abort_flag;
static inline bool tegra_cpuidle_using_firmware(void)
{
return firmware_ops->prepare_idle && firmware_ops->do_idle;
}
static void tegra_cpuidle_report_cpus_state(void)
{
unsigned long cpu, lcpu, csr;
for_each_cpu(lcpu, cpu_possible_mask) {
cpu = cpu_logical_map(lcpu);
csr = flowctrl_read_cpu_csr(cpu);
pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n",
cpu, cpu_online(lcpu), csr);
}
}
static int tegra_cpuidle_wait_for_secondary_cpus_parking(void)
{
unsigned int retries = 3;
while (retries--) {
unsigned int delay_us = 10;
unsigned int timeout_us = 500 * 1000 / delay_us;
/*
* The primary CPU0 core shall wait for the secondaries
* shutdown in order to power-off CPU's cluster safely.
* The timeout value depends on the current CPU frequency,
* it takes about 40-150us in average and over 1000us in
* a worst case scenario.
*/
do {
if (tegra_cpu_rail_off_ready())
return 0;
udelay(delay_us);
} while (timeout_us--);
pr_err("secondary CPU taking too long to park\n");
tegra_cpuidle_report_cpus_state();
}
pr_err("timed out waiting secondaries to park\n");
return -ETIMEDOUT;
}
static void tegra_cpuidle_unpark_secondary_cpus(void)
{
unsigned int cpu, lcpu;
for_each_cpu(lcpu, cpu_online_mask) {
cpu = cpu_logical_map(lcpu);
if (cpu > 0) {
tegra_enable_cpu_clock(cpu);
tegra_cpu_out_of_reset(cpu);
flowctrl_write_cpu_halt(cpu, 0);
}
}
}
static int tegra_cpuidle_cc6_enter(unsigned int cpu)
{
int ret;
if (cpu > 0) {
ret = cpu_suspend(cpu, tegra_pm_park_secondary_cpu);
} else {
ret = tegra_cpuidle_wait_for_secondary_cpus_parking();
if (!ret)
ret = tegra_pm_enter_lp2();
tegra_cpuidle_unpark_secondary_cpus();
}
return ret;
}
static int tegra_cpuidle_c7_enter(void)
{
int err;
if (tegra_cpuidle_using_firmware()) {
err = call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
if (err)
return err;
return call_firmware_op(do_idle, 0);
}
return cpu_suspend(0, tegra30_pm_secondary_cpu_suspend);
}
static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev)
{
if (tegra_pending_sgi()) {
/*
* CPU got local interrupt that will be lost after GIC's
* shutdown because GIC driver doesn't save/restore the
* pending SGI state across CPU cluster PM. Abort and retry
* next time.
*/
atomic_set(&tegra_abort_flag, 1);
}
cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
if (atomic_read(&tegra_abort_flag)) {
cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
atomic_set(&tegra_abort_flag, 0);
return -EINTR;
}
return 0;
}
static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
int index, unsigned int cpu)
{
int ret;
/*
* CC6 state is the "CPU cluster power-off" state. In order to
* enter this state, at first the secondary CPU cores need to be
* parked into offline mode, then the last CPU should clean out
* remaining dirty cache lines into DRAM and trigger Flow Controller
* logic that turns off the cluster's power domain (which includes
* CPU cores, GIC and L2 cache).
*/
if (index == TEGRA_CC6) {
ret = tegra_cpuidle_coupled_barrier(dev);
if (ret)
return ret;
}
local_fiq_disable();
tegra_pm_set_cpu_in_lp2();
cpu_pm_enter();
switch (index) {
case TEGRA_C7:
ret = tegra_cpuidle_c7_enter();
break;
case TEGRA_CC6:
ret = tegra_cpuidle_cc6_enter(cpu);
break;
default:
ret = -EINVAL;
break;
}
cpu_pm_exit();
tegra_pm_clear_cpu_in_lp2();
local_fiq_enable();
return ret;
}
static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu)
{
/*
* On Tegra30 CPU0 can't be power-gated separately from secondary
* cores because it gates the whole CPU cluster.
*/
if (cpu > 0 || index != TEGRA_C7 || tegra_get_chip_id() != TEGRA30)
return index;
/* put CPU0 into C1 if C7 is requested and secondaries are online */
if (!IS_ENABLED(CONFIG_PM_SLEEP) || num_online_cpus() > 1)
index = TEGRA_C1;
else
index = TEGRA_CC6;
return index;
}
static int tegra_cpuidle_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
unsigned int cpu = cpu_logical_map(dev->cpu);
int err;
index = tegra_cpuidle_adjust_state_index(index, cpu);
if (dev->states_usage[index].disable)
return -1;
if (index == TEGRA_C1)
err = arm_cpuidle_simple_enter(dev, drv, index);
else
err = tegra_cpuidle_state_enter(dev, index, cpu);
if (err && (err != -EINTR || index != TEGRA_CC6))
pr_err_once("failed to enter state %d err: %d\n", index, err);
return err ? -1 : index;
}
static void tegra114_enter_s2idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
tegra_cpuidle_enter(dev, drv, index);
}
/*
* The previous versions of Tegra CPUIDLE driver used a different "legacy"
* terminology for naming of the idling states, while this driver uses the
* new terminology.
*
* Mapping of the old terms into the new ones:
*
* Old | New
* ---------
* LP3 | C1 (CPU core clock gating)
* LP2 | C7 (CPU core power gating)
* LP2 | CC6 (CPU cluster power gating)
*
* Note that that the older CPUIDLE driver versions didn't explicitly
* differentiate the LP2 states because these states either used the same
* code path or because CC6 wasn't supported.
*/
static struct cpuidle_driver tegra_idle_driver = {
.name = "tegra_idle",
.states = {
[TEGRA_C1] = ARM_CPUIDLE_WFI_STATE_PWR(600),
[TEGRA_C7] = {
.enter = tegra_cpuidle_enter,
.exit_latency = 2000,
.target_residency = 2200,
.power_usage = 100,
.flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "C7",
.desc = "CPU core powered off",
},
[TEGRA_CC6] = {
.enter = tegra_cpuidle_enter,
.exit_latency = 5000,
.target_residency = 10000,
.power_usage = 0,
.flags = CPUIDLE_FLAG_TIMER_STOP |
CPUIDLE_FLAG_COUPLED,
.name = "CC6",
.desc = "CPU cluster powered off",
},
},
.state_count = TEGRA_STATE_COUNT,
.safe_state_index = TEGRA_C1,
};
static inline void tegra_cpuidle_disable_state(enum tegra_state state)
{
cpuidle_driver_state_disabled(&tegra_idle_driver, state, true);
}
/*
* Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
* they are legacy IRQs or MSI, are lost when CC6 is enabled. To work around
* this, simply disable CC6 if the PCI driver and DT node are both enabled.
*/
void tegra_cpuidle_pcie_irqs_in_use(void)
{
struct cpuidle_state *state_cc6 = &tegra_idle_driver.states[TEGRA_CC6];
if ((state_cc6->flags & CPUIDLE_FLAG_UNUSABLE) ||
tegra_get_chip_id() != TEGRA20)
return;
pr_info("disabling CC6 state, since PCIe IRQs are in use\n");
tegra_cpuidle_disable_state(TEGRA_CC6);
}
static void tegra_cpuidle_setup_tegra114_c7_state(void)
{
struct cpuidle_state *s = &tegra_idle_driver.states[TEGRA_C7];
s->enter_s2idle = tegra114_enter_s2idle;
s->target_residency = 1000;
s->exit_latency = 500;
}
static int tegra_cpuidle_probe(struct platform_device *pdev)
{
/* LP2 could be disabled in device-tree */
if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2)
tegra_cpuidle_disable_state(TEGRA_CC6);
/*
* Required suspend-resume functionality, which is provided by the
* Tegra-arch core and PMC driver, is unavailable if PM-sleep option
* is disabled.
*/
if (!IS_ENABLED(CONFIG_PM_SLEEP)) {
if (!tegra_cpuidle_using_firmware())
tegra_cpuidle_disable_state(TEGRA_C7);
tegra_cpuidle_disable_state(TEGRA_CC6);
}
/*
* Generic WFI state (also known as C1 or LP3) and the coupled CPU
* cluster power-off (CC6 or LP2) states are common for all Tegra SoCs.
*/
switch (tegra_get_chip_id()) {
case TEGRA20:
/* Tegra20 isn't capable to power-off individual CPU cores */
tegra_cpuidle_disable_state(TEGRA_C7);
break;
case TEGRA30:
tegra_cpuidle_disable_state(TEGRA_CC6);
break;
case TEGRA114:
case TEGRA124:
tegra_cpuidle_setup_tegra114_c7_state();
/* coupled CC6 (LP2) state isn't implemented yet */
tegra_cpuidle_disable_state(TEGRA_CC6);
break;
default:
return -EINVAL;
}
return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
}
static struct platform_driver tegra_cpuidle_driver = {
.probe = tegra_cpuidle_probe,
.driver = {
.name = "tegra-cpuidle",
},
};
builtin_platform_driver(tegra_cpuidle_driver);

2
drivers/firmware/xilinx/Kconfig
View File

@ -6,6 +6,8 @@ menu "Zynq MPSoC Firmware Drivers"
config ZYNQMP_FIRMWARE
bool "Enable Xilinx Zynq MPSoC firmware interface"
depends on ARCH_ZYNQMP
default y if ARCH_ZYNQMP
select MFD_CORE
help
Firmware interface driver is used by different

1
drivers/soc/mediatek/mtk-cmdq-helper.c
View File

@ -78,6 +78,7 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index, u32 timeout)
client->pkt_cnt = 0;
client->client.dev = dev;
client->client.tx_block = false;
client->client.knows_txdone = true;
client->chan = mbox_request_channel(&client->client, index);
if (IS_ERR(client->chan)) {

128
drivers/soc/mediatek/mtk-pmic-wrap.c
View File

@ -111,6 +111,28 @@ enum dew_regs {
PWRAP_RG_SPI_CON13,
PWRAP_SPISLV_KEY,
/* MT6359 only regs */
PWRAP_DEW_CRC_SWRST,
PWRAP_DEW_RG_EN_RECORD,
PWRAP_DEW_RECORD_CMD0,
PWRAP_DEW_RECORD_CMD1,
PWRAP_DEW_RECORD_CMD2,
PWRAP_DEW_RECORD_CMD3,
PWRAP_DEW_RECORD_CMD4,
PWRAP_DEW_RECORD_CMD5,
PWRAP_DEW_RECORD_WDATA0,
PWRAP_DEW_RECORD_WDATA1,
PWRAP_DEW_RECORD_WDATA2,
PWRAP_DEW_RECORD_WDATA3,
PWRAP_DEW_RECORD_WDATA4,
PWRAP_DEW_RECORD_WDATA5,
PWRAP_DEW_RG_ADDR_TARGET,
PWRAP_DEW_RG_ADDR_MASK,
PWRAP_DEW_RG_WDATA_TARGET,
PWRAP_DEW_RG_WDATA_MASK,
PWRAP_DEW_RG_SPI_RECORD_CLR,
PWRAP_DEW_RG_CMD_ALERT_CLR,
/* MT6397 only regs */
PWRAP_DEW_EVENT_OUT_EN,
PWRAP_DEW_EVENT_SRC_EN,
@ -197,6 +219,42 @@ static const u32 mt6358_regs[] = {
[PWRAP_SPISLV_KEY] = 0x044a,
};
static const u32 mt6359_regs[] = {
[PWRAP_DEW_RG_EN_RECORD] = 0x040a,
[PWRAP_DEW_DIO_EN] = 0x040c,
[PWRAP_DEW_READ_TEST] = 0x040e,
[PWRAP_DEW_WRITE_TEST] = 0x0410,
[PWRAP_DEW_CRC_SWRST] = 0x0412,
[PWRAP_DEW_CRC_EN] = 0x0414,
[PWRAP_DEW_CRC_VAL] = 0x0416,
[PWRAP_DEW_CIPHER_KEY_SEL] = 0x0418,
[PWRAP_DEW_CIPHER_IV_SEL] = 0x041a,
[PWRAP_DEW_CIPHER_EN] = 0x041c,
[PWRAP_DEW_CIPHER_RDY] = 0x041e,
[PWRAP_DEW_CIPHER_MODE] = 0x0420,
[PWRAP_DEW_CIPHER_SWRST] = 0x0422,
[PWRAP_DEW_RDDMY_NO] = 0x0424,
[PWRAP_DEW_RECORD_CMD0] = 0x0428,
[PWRAP_DEW_RECORD_CMD1] = 0x042a,
[PWRAP_DEW_RECORD_CMD2] = 0x042c,
[PWRAP_DEW_RECORD_CMD3] = 0x042e,
[PWRAP_DEW_RECORD_CMD4] = 0x0430,
[PWRAP_DEW_RECORD_CMD5] = 0x0432,
[PWRAP_DEW_RECORD_WDATA0] = 0x0434,
[PWRAP_DEW_RECORD_WDATA1] = 0x0436,
[PWRAP_DEW_RECORD_WDATA2] = 0x0438,
[PWRAP_DEW_RECORD_WDATA3] = 0x043a,
[PWRAP_DEW_RECORD_WDATA4] = 0x043c,
[PWRAP_DEW_RECORD_WDATA5] = 0x043e,
[PWRAP_DEW_RG_ADDR_TARGET] = 0x0440,
[PWRAP_DEW_RG_ADDR_MASK] = 0x0442,
[PWRAP_DEW_RG_WDATA_TARGET] = 0x0444,
[PWRAP_DEW_RG_WDATA_MASK] = 0x0446,
[PWRAP_DEW_RG_SPI_RECORD_CLR] = 0x0448,
[PWRAP_DEW_RG_CMD_ALERT_CLR] = 0x0448,
[PWRAP_SPISLV_KEY] = 0x044a,
};
static const u32 mt6397_regs[] = {
[PWRAP_DEW_BASE] = 0xbc00,
[PWRAP_DEW_EVENT_OUT_EN] = 0xbc00,
@ -497,6 +555,45 @@ static int mt6765_regs[] = {
[PWRAP_DCM_DBC_PRD] = 0x1E0,
};
static int mt6779_regs[] = {
[PWRAP_MUX_SEL] = 0x0,
[PWRAP_WRAP_EN] = 0x4,
[PWRAP_DIO_EN] = 0x8,
[PWRAP_RDDMY] = 0x20,
[PWRAP_CSHEXT_WRITE] = 0x24,
[PWRAP_CSHEXT_READ] = 0x28,
[PWRAP_CSLEXT_WRITE] = 0x2C,
[PWRAP_CSLEXT_READ] = 0x30,
[PWRAP_EXT_CK_WRITE] = 0x34,
[PWRAP_STAUPD_CTRL] = 0x3C,
[PWRAP_STAUPD_GRPEN] = 0x40,
[PWRAP_EINT_STA0_ADR] = 0x44,
[PWRAP_HARB_HPRIO] = 0x68,
[PWRAP_HIPRIO_ARB_EN] = 0x6C,
[PWRAP_MAN_EN] = 0x7C,
[PWRAP_MAN_CMD] = 0x80,
[PWRAP_WACS0_EN] = 0x8C,
[PWRAP_INIT_DONE0] = 0x90,
[PWRAP_WACS1_EN] = 0x94,
[PWRAP_WACS2_EN] = 0x9C,
[PWRAP_INIT_DONE1] = 0x98,
[PWRAP_INIT_DONE2] = 0xA0,
[PWRAP_INT_EN] = 0xBC,
[PWRAP_INT_FLG_RAW] = 0xC0,
[PWRAP_INT_FLG] = 0xC4,
[PWRAP_INT_CLR] = 0xC8,
[PWRAP_INT1_EN] = 0xCC,
[PWRAP_INT1_FLG] = 0xD4,
[PWRAP_INT1_CLR] = 0xD8,
[PWRAP_TIMER_EN] = 0xF0,
[PWRAP_WDT_UNIT] = 0xF8,
[PWRAP_WDT_SRC_EN] = 0xFC,
[PWRAP_WDT_SRC_EN_1] = 0x100,
[PWRAP_WACS2_CMD] = 0xC20,
[PWRAP_WACS2_RDATA] = 0xC24,
[PWRAP_WACS2_VLDCLR] = 0xC28,
};
static int mt6797_regs[] = {
[PWRAP_MUX_SEL] = 0x0,
[PWRAP_WRAP_EN] = 0x4,
@ -938,6 +1035,7 @@ enum pmic_type {
PMIC_MT6351,
PMIC_MT6357,
PMIC_MT6358,
PMIC_MT6359,
PMIC_MT6380,
PMIC_MT6397,
};
@ -945,6 +1043,7 @@ enum pmic_type {
enum pwrap_type {
PWRAP_MT2701,
PWRAP_MT6765,
PWRAP_MT6779,
PWRAP_MT6797,
PWRAP_MT7622,
PWRAP_MT8135,
@ -1377,6 +1476,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
break;
case PWRAP_MT2701:
case PWRAP_MT6765:
case PWRAP_MT6779:
case PWRAP_MT6797:
case PWRAP_MT8173:
case PWRAP_MT8516:
@ -1711,6 +1811,15 @@ static const struct pwrap_slv_type pmic_mt6358 = {
.pwrap_write = pwrap_write16,
};
static const struct pwrap_slv_type pmic_mt6359 = {
.dew_regs = mt6359_regs,
.type = PMIC_MT6359,
.regmap = &pwrap_regmap_config16,
.caps = PWRAP_SLV_CAP_DUALIO,
.pwrap_read = pwrap_read16,
.pwrap_write = pwrap_write16,
};
static const struct pwrap_slv_type pmic_mt6380 = {
.dew_regs = NULL,
.type = PMIC_MT6380,
@ -1743,6 +1852,9 @@ static const struct of_device_id of_slave_match_tbl[] = {
}, {
.compatible = "mediatek,mt6358",
.data = &pmic_mt6358,
}, {
.compatible = "mediatek,mt6359",
.data = &pmic_mt6359,
}, {
/* The MT6380 PMIC only implements a regulator, so we bind it
* directly instead of using a MFD.
@ -1783,6 +1895,19 @@ static const struct pmic_wrapper_type pwrap_mt6765 = {
.init_soc_specific = NULL,
};
static const struct pmic_wrapper_type pwrap_mt6779 = {
.regs = mt6779_regs,
.type = PWRAP_MT6779,
.arb_en_all = 0xfbb7f,
.int_en_all = 0xfffffffe,
.int1_en_all = 0,
.spi_w = PWRAP_MAN_CMD_SPI_WRITE,
.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
.caps = 0,
.init_reg_clock = pwrap_common_init_reg_clock,
.init_soc_specific = NULL,
};
static const struct pmic_wrapper_type pwrap_mt6797 = {
.regs = mt6797_regs,
.type = PWRAP_MT6797,
@ -1867,6 +1992,9 @@ static const struct of_device_id of_pwrap_match_tbl[] = {
}, {
.compatible = "mediatek,mt6765-pwrap",
.data = &pwrap_mt6765,
}, {
.compatible = "mediatek,mt6779-pwrap",
.data = &pwrap_mt6779,
}, {
.compatible = "mediatek,mt6797-pwrap",
.data = &pwrap_mt6797,

2
drivers/soc/renesas/Kconfig
View File

@ -116,6 +116,7 @@ config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
select ARM_ERRATA_754322
select ARM_GLOBAL_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select SYSC_R8A7779
@ -163,6 +164,7 @@ config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_RMOBILE
select ARM_ERRATA_754322
select ARM_GLOBAL_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select RENESAS_INTC_IRQPIN

688
drivers/soc/tegra/pmc.c
View File

@ -3,7 +3,7 @@
* drivers/soc/tegra/pmc.c
*
* Copyright (c) 2010 Google, Inc
* Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.
* Copyright (c) 2018-2020, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@google.com>
@ -13,9 +13,13 @@
#include <linux/arm-smccc.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/clk-conf.h>
#include <linux/clk/tegra.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/init.h>
@ -48,6 +52,7 @@
#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/gpio/tegra186-gpio.h>
#include <dt-bindings/gpio/tegra194-gpio.h>
#include <dt-bindings/soc/tegra-pmc.h>
#define PMC_CNTRL 0x0
#define PMC_CNTRL_INTR_POLARITY BIT(17) /* inverts INTR polarity */
@ -57,12 +62,15 @@
#define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */
#define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */
#define PMC_CNTRL_PWRREQ_POLARITY BIT(8)
#define PMC_CNTRL_BLINK_EN 7
#define PMC_CNTRL_MAIN_RST BIT(4)
#define PMC_WAKE_MASK 0x0c
#define PMC_WAKE_LEVEL 0x10
#define PMC_WAKE_STATUS 0x14
#define PMC_SW_WAKE_STATUS 0x18
#define PMC_DPD_PADS_ORIDE 0x1c
#define PMC_DPD_PADS_ORIDE_BLINK 20
#define DPD_SAMPLE 0x020
#define DPD_SAMPLE_ENABLE BIT(0)
@ -75,6 +83,7 @@
#define PWRGATE_STATUS 0x38
#define PMC_BLINK_TIMER 0x40
#define PMC_IMPL_E_33V_PWR 0x40
#define PMC_PWR_DET 0x48
@ -100,6 +109,8 @@
#define PMC_WAKE2_STATUS 0x168
#define PMC_SW_WAKE2_STATUS 0x16c
#define PMC_CLK_OUT_CNTRL 0x1a8
#define PMC_CLK_OUT_MUX_MASK GENMASK(1, 0)
#define PMC_SENSOR_CTRL 0x1b0
#define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2)
#define PMC_SENSOR_CTRL_ENABLE_RST BIT(1)
@ -155,6 +166,71 @@
#define TEGRA_SMC_PMC_READ 0xaa
#define TEGRA_SMC_PMC_WRITE 0xbb
struct pmc_clk {
struct clk_hw hw;
unsigned long offs;
u32 mux_shift;
u32 force_en_shift;
};
#define to_pmc_clk(_hw) container_of(_hw, struct pmc_clk, hw)
struct pmc_clk_gate {
struct clk_hw hw;
unsigned long offs;
u32 shift;
};
#define to_pmc_clk_gate(_hw) container_of(_hw, struct pmc_clk_gate, hw)
struct pmc_clk_init_data {
char *name;
const char *const *parents;
int num_parents;
int clk_id;
u8 mux_shift;
u8 force_en_shift;
};
static const char * const clk_out1_parents[] = { "osc", "osc_div2",
"osc_div4", "extern1",
};
static const char * const clk_out2_parents[] = { "osc", "osc_div2",
"osc_div4", "extern2",
};
static const char * const clk_out3_parents[] = { "osc", "osc_div2",
"osc_div4", "extern3",
};
static const struct pmc_clk_init_data tegra_pmc_clks_data[] = {
{
.name = "pmc_clk_out_1",
.parents = clk_out1_parents,
.num_parents = ARRAY_SIZE(clk_out1_parents),
.clk_id = TEGRA_PMC_CLK_OUT_1,
.mux_shift = 6,
.force_en_shift = 2,
},
{
.name = "pmc_clk_out_2",
.parents = clk_out2_parents,
.num_parents = ARRAY_SIZE(clk_out2_parents),
.clk_id = TEGRA_PMC_CLK_OUT_2,
.mux_shift = 14,
.force_en_shift = 10,
},
{
.name = "pmc_clk_out_3",
.parents = clk_out3_parents,
.num_parents = ARRAY_SIZE(clk_out3_parents),
.clk_id = TEGRA_PMC_CLK_OUT_3,
.mux_shift = 22,
.force_en_shift = 18,
},
};
struct tegra_powergate {
struct generic_pm_domain genpd;
struct tegra_pmc *pmc;
@ -254,6 +330,10 @@ struct tegra_pmc_soc {
*/
const struct tegra_wake_event *wake_events;
unsigned int num_wake_events;
const struct pmc_clk_init_data *pmc_clks_data;
unsigned int num_pmc_clks;
bool has_blink_output;
};
static const char * const tegra186_reset_sources[] = {
@ -2163,6 +2243,258 @@ static int tegra_pmc_clk_notify_cb(struct notifier_block *nb,
return NOTIFY_OK;
}
static void pmc_clk_fence_udelay(u32 offset)
{
tegra_pmc_readl(pmc, offset);
/* pmc clk propagation delay 2 us */
udelay(2);
}
static u8 pmc_clk_mux_get_parent(struct clk_hw *hw)
{
struct pmc_clk *clk = to_pmc_clk(hw);
u32 val;
val = tegra_pmc_readl(pmc, clk->offs) >> clk->mux_shift;
val &= PMC_CLK_OUT_MUX_MASK;
return val;
}
static int pmc_clk_mux_set_parent(struct clk_hw *hw, u8 index)
{
struct pmc_clk *clk = to_pmc_clk(hw);
u32 val;
val = tegra_pmc_readl(pmc, clk->offs);
val &= ~(PMC_CLK_OUT_MUX_MASK << clk->mux_shift);
val |= index << clk->mux_shift;
tegra_pmc_writel(pmc, val, clk->offs);
pmc_clk_fence_udelay(clk->offs);
return 0;
}
static int pmc_clk_is_enabled(struct clk_hw *hw)
{
struct pmc_clk *clk = to_pmc_clk(hw);
u32 val;
val = tegra_pmc_readl(pmc, clk->offs) & BIT(clk->force_en_shift);
return val ? 1 : 0;
}
static void pmc_clk_set_state(unsigned long offs, u32 shift, int state)
{
u32 val;
val = tegra_pmc_readl(pmc, offs);
val = state ? (val | BIT(shift)) : (val & ~BIT(shift));
tegra_pmc_writel(pmc, val, offs);
pmc_clk_fence_udelay(offs);
}
static int pmc_clk_enable(struct clk_hw *hw)
{
struct pmc_clk *clk = to_pmc_clk(hw);
pmc_clk_set_state(clk->offs, clk->force_en_shift, 1);
return 0;
}
static void pmc_clk_disable(struct clk_hw *hw)
{
struct pmc_clk *clk = to_pmc_clk(hw);
pmc_clk_set_state(clk->offs, clk->force_en_shift, 0);
}
static const struct clk_ops pmc_clk_ops = {
.get_parent = pmc_clk_mux_get_parent,
.set_parent = pmc_clk_mux_set_parent,
.determine_rate = __clk_mux_determine_rate,
.is_enabled = pmc_clk_is_enabled,
.enable = pmc_clk_enable,
.disable = pmc_clk_disable,
};
static struct clk *
tegra_pmc_clk_out_register(struct tegra_pmc *pmc,
const struct pmc_clk_init_data *data,
unsigned long offset)
{
struct clk_init_data init;
struct pmc_clk *pmc_clk;
pmc_clk = devm_kzalloc(pmc->dev, sizeof(*pmc_clk), GFP_KERNEL);
if (!pmc_clk)
return ERR_PTR(-ENOMEM);
init.name = data->name;
init.ops = &pmc_clk_ops;
init.parent_names = data->parents;
init.num_parents = data->num_parents;
init.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT |
CLK_SET_PARENT_GATE;
pmc_clk->hw.init = &init;
pmc_clk->offs = offset;
pmc_clk->mux_shift = data->mux_shift;
pmc_clk->force_en_shift = data->force_en_shift;
return clk_register(NULL, &pmc_clk->hw);
}
static int pmc_clk_gate_is_enabled(struct clk_hw *hw)
{
struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
return tegra_pmc_readl(pmc, gate->offs) & BIT(gate->shift) ? 1 : 0;
}
static int pmc_clk_gate_enable(struct clk_hw *hw)
{
struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
pmc_clk_set_state(gate->offs, gate->shift, 1);
return 0;
}
static void pmc_clk_gate_disable(struct clk_hw *hw)
{
struct pmc_clk_gate *gate = to_pmc_clk_gate(hw);
pmc_clk_set_state(gate->offs, gate->shift, 0);
}
static const struct clk_ops pmc_clk_gate_ops = {
.is_enabled = pmc_clk_gate_is_enabled,
.enable = pmc_clk_gate_enable,
.disable = pmc_clk_gate_disable,
};
static struct clk *
tegra_pmc_clk_gate_register(struct tegra_pmc *pmc, const char *name,
const char *parent_name, unsigned long offset,
u32 shift)
{
struct clk_init_data init;
struct pmc_clk_gate *gate;
gate = devm_kzalloc(pmc->dev, sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
init.name = name;
init.ops = &pmc_clk_gate_ops;
init.parent_names = &parent_name;
init.num_parents = 1;
init.flags = 0;
gate->hw.init = &init;
gate->offs = offset;
gate->shift = shift;
return clk_register(NULL, &gate->hw);
}
static void tegra_pmc_clock_register(struct tegra_pmc *pmc,
struct device_node *np)
{
struct clk *clk;
struct clk_onecell_data *clk_data;
unsigned int num_clks;
int i, err;
num_clks = pmc->soc->num_pmc_clks;
if (pmc->soc->has_blink_output)
num_clks += 1;
if (!num_clks)
return;
clk_data = devm_kmalloc(pmc->dev, sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
return;
clk_data->clks = devm_kcalloc(pmc->dev, TEGRA_PMC_CLK_MAX,
sizeof(*clk_data->clks), GFP_KERNEL);
if (!clk_data->clks)
return;
clk_data->clk_num = TEGRA_PMC_CLK_MAX;
for (i = 0; i < TEGRA_PMC_CLK_MAX; i++)
clk_data->clks[i] = ERR_PTR(-ENOENT);
for (i = 0; i < pmc->soc->num_pmc_clks; i++) {
const struct pmc_clk_init_data *data;
data = pmc->soc->pmc_clks_data + i;
clk = tegra_pmc_clk_out_register(pmc, data, PMC_CLK_OUT_CNTRL);
if (IS_ERR(clk)) {
dev_warn(pmc->dev, "unable to register clock %s: %d\n",
data->name, PTR_ERR_OR_ZERO(clk));
return;
}
err = clk_register_clkdev(clk, data->name, NULL);
if (err) {
dev_warn(pmc->dev,
"unable to register %s clock lookup: %d\n",
data->name, err);
return;
}
clk_data->clks[data->clk_id] = clk;
}
if (pmc->soc->has_blink_output) {
tegra_pmc_writel(pmc, 0x0, PMC_BLINK_TIMER);
clk = tegra_pmc_clk_gate_register(pmc,
"pmc_blink_override",
"clk_32k",
PMC_DPD_PADS_ORIDE,
PMC_DPD_PADS_ORIDE_BLINK);
if (IS_ERR(clk)) {
dev_warn(pmc->dev,
"unable to register pmc_blink_override: %d\n",
PTR_ERR_OR_ZERO(clk));
return;
}
clk = tegra_pmc_clk_gate_register(pmc, "pmc_blink",
"pmc_blink_override",
PMC_CNTRL,
PMC_CNTRL_BLINK_EN);
if (IS_ERR(clk)) {
dev_warn(pmc->dev,
"unable to register pmc_blink: %d\n",
PTR_ERR_OR_ZERO(clk));
return;
}
err = clk_register_clkdev(clk, "pmc_blink", NULL);
if (err) {
dev_warn(pmc->dev,
"unable to register pmc_blink lookup: %d\n",
err);
return;
}
clk_data->clks[TEGRA_PMC_CLK_BLINK] = clk;
}
err = of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
if (err)
dev_warn(pmc->dev, "failed to add pmc clock provider: %d\n",
err);
}
static int tegra_pmc_probe(struct platform_device *pdev)
{
void __iomem *base;
@ -2281,6 +2613,7 @@ static int tegra_pmc_probe(struct platform_device *pdev)
pmc->base = base;
mutex_unlock(&pmc->powergates_lock);
tegra_pmc_clock_register(pmc, pdev->dev.of_node);
platform_set_drvdata(pdev, pmc);
return 0;
@ -2422,6 +2755,9 @@ static const struct tegra_pmc_soc tegra20_pmc_soc = {
.num_reset_sources = 0,
.reset_levels = NULL,
.num_reset_levels = 0,
.pmc_clks_data = NULL,
.num_pmc_clks = 0,
.has_blink_output = true,
};
static const char * const tegra30_powergates[] = {
@ -2469,6 +2805,9 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {
.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
.reset_levels = NULL,
.num_reset_levels = 0,
.pmc_clks_data = tegra_pmc_clks_data,
.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
.has_blink_output = true,
};
static const char * const tegra114_powergates[] = {
@ -2520,6 +2859,9 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = {
.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
.reset_levels = NULL,
.num_reset_levels = 0,
.pmc_clks_data = tegra_pmc_clks_data,
.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
.has_blink_output = true,
};
static const char * const tegra124_powergates[] = {
@ -2569,38 +2911,38 @@ static const u8 tegra124_cpu_powergates[] = {
.name = (_name) \
})
#define TEGRA124_IO_PAD_TABLE(_pad) \
/* .id .dpd .voltage .name */ \
_pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
_pad(TEGRA_IO_PAD_BB, 15, UINT_MAX, "bb"), \
_pad(TEGRA_IO_PAD_CAM, 36, UINT_MAX, "cam"), \
_pad(TEGRA_IO_PAD_COMP, 22, UINT_MAX, "comp"), \
_pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
_pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csb"), \
_pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "cse"), \
_pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
_pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
_pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
_pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
_pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
_pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
_pad(TEGRA_IO_PAD_HV, 38, UINT_MAX, "hv"), \
_pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
_pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
_pad(TEGRA_IO_PAD_NAND, 13, UINT_MAX, "nand"), \
_pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
_pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
_pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
_pad(TEGRA_IO_PAD_SDMMC1, 33, UINT_MAX, "sdmmc1"), \
_pad(TEGRA_IO_PAD_SDMMC3, 34, UINT_MAX, "sdmmc3"), \
_pad(TEGRA_IO_PAD_SDMMC4, 35, UINT_MAX, "sdmmc4"), \
_pad(TEGRA_IO_PAD_SYS_DDC, 58, UINT_MAX, "sys_ddc"), \
_pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
_pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
_pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
_pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
_pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb_bias")
#define TEGRA124_IO_PAD_TABLE(_pad) \
/* .id .dpd .voltage .name */ \
_pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
_pad(TEGRA_IO_PAD_BB, 15, UINT_MAX, "bb"), \
_pad(TEGRA_IO_PAD_CAM, 36, UINT_MAX, "cam"), \
_pad(TEGRA_IO_PAD_COMP, 22, UINT_MAX, "comp"), \
_pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
_pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csb"), \
_pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "cse"), \
_pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
_pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
_pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
_pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
_pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
_pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
_pad(TEGRA_IO_PAD_HV, 38, UINT_MAX, "hv"), \
_pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
_pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
_pad(TEGRA_IO_PAD_NAND, 13, UINT_MAX, "nand"), \
_pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
_pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
_pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
_pad(TEGRA_IO_PAD_SDMMC1, 33, UINT_MAX, "sdmmc1"), \
_pad(TEGRA_IO_PAD_SDMMC3, 34, UINT_MAX, "sdmmc3"), \
_pad(TEGRA_IO_PAD_SDMMC4, 35, UINT_MAX, "sdmmc4"), \
_pad(TEGRA_IO_PAD_SYS_DDC, 58, UINT_MAX, "sys_ddc"), \
_pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
_pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
_pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
_pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
_pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb_bias")
static const struct tegra_io_pad_soc tegra124_io_pads[] = {
TEGRA124_IO_PAD_TABLE(TEGRA_IO_PAD)
@ -2631,6 +2973,9 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = {
.num_reset_sources = ARRAY_SIZE(tegra30_reset_sources),
.reset_levels = NULL,
.num_reset_levels = 0,
.pmc_clks_data = tegra_pmc_clks_data,
.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
.has_blink_output = true,
};
static const char * const tegra210_powergates[] = {
@ -2667,46 +3012,46 @@ static const u8 tegra210_cpu_powergates[] = {
TEGRA_POWERGATE_CPU3,
};
#define TEGRA210_IO_PAD_TABLE(_pad) \
/* .id .dpd .voltage .name */ \
_pad(TEGRA_IO_PAD_AUDIO, 17, 5, "audio"), \
_pad(TEGRA_IO_PAD_AUDIO_HV, 61, 18, "audio-hv"), \
_pad(TEGRA_IO_PAD_CAM, 36, 10, "cam"), \
_pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
_pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
_pad(TEGRA_IO_PAD_CSIC, 42, UINT_MAX, "csic"), \
_pad(TEGRA_IO_PAD_CSID, 43, UINT_MAX, "csid"), \
_pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "csie"), \
_pad(TEGRA_IO_PAD_CSIF, 45, UINT_MAX, "csif"), \
_pad(TEGRA_IO_PAD_DBG, 25, 19, "dbg"), \
_pad(TEGRA_IO_PAD_DEBUG_NONAO, 26, UINT_MAX, "debug-nonao"), \
_pad(TEGRA_IO_PAD_DMIC, 50, 20, "dmic"), \
_pad(TEGRA_IO_PAD_DP, 51, UINT_MAX, "dp"), \
_pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
_pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
_pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
_pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
_pad(TEGRA_IO_PAD_EMMC, 35, UINT_MAX, "emmc"), \
_pad(TEGRA_IO_PAD_EMMC2, 37, UINT_MAX, "emmc2"), \
_pad(TEGRA_IO_PAD_GPIO, 27, 21, "gpio"), \
_pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
_pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
_pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
_pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
_pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
_pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
_pad(TEGRA_IO_PAD_PEX_CNTRL, UINT_MAX, 11, "pex-cntrl"), \
_pad(TEGRA_IO_PAD_SDMMC1, 33, 12, "sdmmc1"), \
_pad(TEGRA_IO_PAD_SDMMC3, 34, 13, "sdmmc3"), \
_pad(TEGRA_IO_PAD_SPI, 46, 22, "spi"), \
_pad(TEGRA_IO_PAD_SPI_HV, 47, 23, "spi-hv"), \
_pad(TEGRA_IO_PAD_UART, 14, 2, "uart"), \
_pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
_pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
_pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
_pad(TEGRA_IO_PAD_USB3, 18, UINT_MAX, "usb3"), \
_pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias")
#define TEGRA210_IO_PAD_TABLE(_pad) \
/* .id .dpd .voltage .name */ \
_pad(TEGRA_IO_PAD_AUDIO, 17, 5, "audio"), \
_pad(TEGRA_IO_PAD_AUDIO_HV, 61, 18, "audio-hv"), \
_pad(TEGRA_IO_PAD_CAM, 36, 10, "cam"), \
_pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
_pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
_pad(TEGRA_IO_PAD_CSIC, 42, UINT_MAX, "csic"), \
_pad(TEGRA_IO_PAD_CSID, 43, UINT_MAX, "csid"), \
_pad(TEGRA_IO_PAD_CSIE, 44, UINT_MAX, "csie"), \
_pad(TEGRA_IO_PAD_CSIF, 45, UINT_MAX, "csif"), \
_pad(TEGRA_IO_PAD_DBG, 25, 19, "dbg"), \
_pad(TEGRA_IO_PAD_DEBUG_NONAO, 26, UINT_MAX, "debug-nonao"), \
_pad(TEGRA_IO_PAD_DMIC, 50, 20, "dmic"), \
_pad(TEGRA_IO_PAD_DP, 51, UINT_MAX, "dp"), \
_pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
_pad(TEGRA_IO_PAD_DSIB, 39, UINT_MAX, "dsib"), \
_pad(TEGRA_IO_PAD_DSIC, 40, UINT_MAX, "dsic"), \
_pad(TEGRA_IO_PAD_DSID, 41, UINT_MAX, "dsid"), \
_pad(TEGRA_IO_PAD_EMMC, 35, UINT_MAX, "emmc"), \
_pad(TEGRA_IO_PAD_EMMC2, 37, UINT_MAX, "emmc2"), \
_pad(TEGRA_IO_PAD_GPIO, 27, 21, "gpio"), \
_pad(TEGRA_IO_PAD_HDMI, 28, UINT_MAX, "hdmi"), \
_pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
_pad(TEGRA_IO_PAD_LVDS, 57, UINT_MAX, "lvds"), \
_pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
_pad(TEGRA_IO_PAD_PEX_BIAS, 4, UINT_MAX, "pex-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK1, 5, UINT_MAX, "pex-clk1"), \
_pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
_pad(TEGRA_IO_PAD_PEX_CNTRL, UINT_MAX, 11, "pex-cntrl"), \
_pad(TEGRA_IO_PAD_SDMMC1, 33, 12, "sdmmc1"), \
_pad(TEGRA_IO_PAD_SDMMC3, 34, 13, "sdmmc3"), \
_pad(TEGRA_IO_PAD_SPI, 46, 22, "spi"), \
_pad(TEGRA_IO_PAD_SPI_HV, 47, 23, "spi-hv"), \
_pad(TEGRA_IO_PAD_UART, 14, 2, "uart"), \
_pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
_pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
_pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
_pad(TEGRA_IO_PAD_USB3, 18, UINT_MAX, "usb3"), \
_pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias")
static const struct tegra_io_pad_soc tegra210_io_pads[] = {
TEGRA210_IO_PAD_TABLE(TEGRA_IO_PAD)
@ -2745,48 +3090,51 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
.num_reset_levels = 0,
.num_wake_events = ARRAY_SIZE(tegra210_wake_events),
.wake_events = tegra210_wake_events,
.pmc_clks_data = tegra_pmc_clks_data,
.num_pmc_clks = ARRAY_SIZE(tegra_pmc_clks_data),
.has_blink_output = true,
};
#define TEGRA186_IO_PAD_TABLE(_pad) \
/* .id .dpd .voltage .name */ \
_pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
_pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
_pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
_pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK_BIAS, 4, UINT_MAX, "pex-clk-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK3, 5, UINT_MAX, "pex-clk3"), \
_pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
_pad(TEGRA_IO_PAD_PEX_CLK1, 7, UINT_MAX, "pex-clk1"), \
_pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
_pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
_pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
_pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias"), \
_pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
_pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
_pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
_pad(TEGRA_IO_PAD_DBG, 25, UINT_MAX, "dbg"), \
_pad(TEGRA_IO_PAD_HDMI_DP0, 28, UINT_MAX, "hdmi-dp0"), \
_pad(TEGRA_IO_PAD_HDMI_DP1, 29, UINT_MAX, "hdmi-dp1"), \
_pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
_pad(TEGRA_IO_PAD_SDMMC2_HV, 34, 5, "sdmmc2-hv"), \
_pad(TEGRA_IO_PAD_SDMMC4, 36, UINT_MAX, "sdmmc4"), \
_pad(TEGRA_IO_PAD_CAM, 38, UINT_MAX, "cam"), \
_pad(TEGRA_IO_PAD_DSIB, 40, UINT_MAX, "dsib"), \
_pad(TEGRA_IO_PAD_DSIC, 41, UINT_MAX, "dsic"), \
_pad(TEGRA_IO_PAD_DSID, 42, UINT_MAX, "dsid"), \
_pad(TEGRA_IO_PAD_CSIC, 43, UINT_MAX, "csic"), \
_pad(TEGRA_IO_PAD_CSID, 44, UINT_MAX, "csid"), \
_pad(TEGRA_IO_PAD_CSIE, 45, UINT_MAX, "csie"), \
_pad(TEGRA_IO_PAD_CSIF, 46, UINT_MAX, "csif"), \
_pad(TEGRA_IO_PAD_SPI, 47, UINT_MAX, "spi"), \
_pad(TEGRA_IO_PAD_UFS, 49, UINT_MAX, "ufs"), \
_pad(TEGRA_IO_PAD_DMIC_HV, 52, 2, "dmic-hv"), \
_pad(TEGRA_IO_PAD_EDP, 53, UINT_MAX, "edp"), \
_pad(TEGRA_IO_PAD_SDMMC1_HV, 55, 4, "sdmmc1-hv"), \
_pad(TEGRA_IO_PAD_SDMMC3_HV, 56, 6, "sdmmc3-hv"), \
_pad(TEGRA_IO_PAD_CONN, 60, UINT_MAX, "conn"), \
_pad(TEGRA_IO_PAD_AUDIO_HV, 61, 1, "audio-hv"), \
_pad(TEGRA_IO_PAD_AO_HV, UINT_MAX, 0, "ao-hv")
#define TEGRA186_IO_PAD_TABLE(_pad) \
/* .id .dpd .voltage .name */ \
_pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
_pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
_pad(TEGRA_IO_PAD_DSI, 2, UINT_MAX, "dsi"), \
_pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK_BIAS, 4, UINT_MAX, "pex-clk-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK3, 5, UINT_MAX, "pex-clk3"), \
_pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
_pad(TEGRA_IO_PAD_PEX_CLK1, 7, UINT_MAX, "pex-clk1"), \
_pad(TEGRA_IO_PAD_USB0, 9, UINT_MAX, "usb0"), \
_pad(TEGRA_IO_PAD_USB1, 10, UINT_MAX, "usb1"), \
_pad(TEGRA_IO_PAD_USB2, 11, UINT_MAX, "usb2"), \
_pad(TEGRA_IO_PAD_USB_BIAS, 12, UINT_MAX, "usb-bias"), \
_pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
_pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
_pad(TEGRA_IO_PAD_HSIC, 19, UINT_MAX, "hsic"), \
_pad(TEGRA_IO_PAD_DBG, 25, UINT_MAX, "dbg"), \
_pad(TEGRA_IO_PAD_HDMI_DP0, 28, UINT_MAX, "hdmi-dp0"), \
_pad(TEGRA_IO_PAD_HDMI_DP1, 29, UINT_MAX, "hdmi-dp1"), \
_pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
_pad(TEGRA_IO_PAD_SDMMC2_HV, 34, 5, "sdmmc2-hv"), \
_pad(TEGRA_IO_PAD_SDMMC4, 36, UINT_MAX, "sdmmc4"), \
_pad(TEGRA_IO_PAD_CAM, 38, UINT_MAX, "cam"), \
_pad(TEGRA_IO_PAD_DSIB, 40, UINT_MAX, "dsib"), \
_pad(TEGRA_IO_PAD_DSIC, 41, UINT_MAX, "dsic"), \
_pad(TEGRA_IO_PAD_DSID, 42, UINT_MAX, "dsid"), \
_pad(TEGRA_IO_PAD_CSIC, 43, UINT_MAX, "csic"), \
_pad(TEGRA_IO_PAD_CSID, 44, UINT_MAX, "csid"), \
_pad(TEGRA_IO_PAD_CSIE, 45, UINT_MAX, "csie"), \
_pad(TEGRA_IO_PAD_CSIF, 46, UINT_MAX, "csif"), \
_pad(TEGRA_IO_PAD_SPI, 47, UINT_MAX, "spi"), \
_pad(TEGRA_IO_PAD_UFS, 49, UINT_MAX, "ufs"), \
_pad(TEGRA_IO_PAD_DMIC_HV, 52, 2, "dmic-hv"), \
_pad(TEGRA_IO_PAD_EDP, 53, UINT_MAX, "edp"), \
_pad(TEGRA_IO_PAD_SDMMC1_HV, 55, 4, "sdmmc1-hv"), \
_pad(TEGRA_IO_PAD_SDMMC3_HV, 56, 6, "sdmmc3-hv"), \
_pad(TEGRA_IO_PAD_CONN, 60, UINT_MAX, "conn"), \
_pad(TEGRA_IO_PAD_AUDIO_HV, 61, 1, "audio-hv"), \
_pad(TEGRA_IO_PAD_AO_HV, UINT_MAX, 0, "ao-hv")
static const struct tegra_io_pad_soc tegra186_io_pads[] = {
TEGRA186_IO_PAD_TABLE(TEGRA_IO_PAD)
@ -2874,56 +3222,69 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
.num_reset_levels = ARRAY_SIZE(tegra186_reset_levels),
.num_wake_events = ARRAY_SIZE(tegra186_wake_events),
.wake_events = tegra186_wake_events,
.pmc_clks_data = NULL,
.num_pmc_clks = 0,
.has_blink_output = false,
};
#define TEGRA194_IO_PAD_TABLE(_pad) \
/* .id .dpd .voltage .name */ \
_pad(TEGRA_IO_PAD_CSIA, 0, UINT_MAX, "csia"), \
_pad(TEGRA_IO_PAD_CSIB, 1, UINT_MAX, "csib"), \
_pad(TEGRA_IO_PAD_MIPI_BIAS, 3, UINT_MAX, "mipi-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK_BIAS, 4, UINT_MAX, "pex-clk-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK3, 5, UINT_MAX, "pex-clk3"), \
_pad(TEGRA_IO_PAD_PEX_CLK2, 6, UINT_MAX, "pex-clk2"), \
_pad(TEGRA_IO_PAD_PEX_CLK1, 7, UINT_MAX, "pex-clk1"), \
_pad(TEGRA_IO_PAD_EQOS, 8, UINT_MAX, "eqos"), \
_pad(TEGRA_IO_PAD_PEX_CLK_2_BIAS, 9, UINT_MAX, "pex-clk-2-bias"), \
_pad(TEGRA_IO_PAD_PEX_CLK_2, 10, UINT_MAX, "pex-clk-2"), \
_pad(TEGRA_IO_PAD_DAP3, 11, UINT_MAX, "dap3"), \
_pad(TEGRA_IO_PAD_DAP5, 12, UINT_MAX, "dap5"), \
_pad(TEGRA_IO_PAD_UART, 14, UINT_MAX, "uart"), \
_pad(TEGRA_IO_PAD_PWR_CTL, 15, UINT_MAX, "pwr-ctl"), \
_pad(TEGRA_IO_PAD_SOC_GPIO53, 16, UINT_MAX, "soc-gpio53"), \
_pad(TEGRA_IO_PAD_AUDIO, 17, UINT_MAX, "audio"), \
_pad(TEGRA_IO_PAD_GP_PWM2, 18, UINT_MAX, "gp-pwm2"), \
_pad(TEGRA_IO_PAD_GP_PWM3, 19, UINT_MAX, "gp-pwm3"), \
_pad(TEGRA_IO_PAD_SOC_GPIO12, 20, UINT_MAX, "soc-gpio12"), \
_pad(TEGRA_IO_PAD_SOC_GPIO13, 21, UINT_MAX, "soc-gpio13"), \
_pad(TEGRA_IO_PAD_SOC_GPIO10, 22, UINT_MAX, "soc-gpio10"), \
_pad(TEGRA_IO_PAD_UART4, 23, UINT_MAX, "uart4"), \
_pad(TEGRA_IO_PAD_UART5, 24, UINT_MAX, "uart5"), \
_pad(TEGRA_IO_PAD_DBG, 25, UINT_MAX, "dbg"), \
_pad(TEGRA_IO_PAD_HDMI_DP3, 26, UINT_MAX, "hdmi-dp3"), \
_pad(TEGRA_IO_PAD_HDMI_DP2, 27, UINT_MAX, "hdmi-dp2"), \
_pad(TEGRA_IO_PAD_HDMI_DP0, 28, UINT_MAX, "hdmi-dp0"), \
_pad(TEGRA_IO_PAD_HDMI_DP1, 29, UINT_MAX, "hdmi-dp1"), \
_pad(TEGRA_IO_PAD_PEX_CNTRL, 32, UINT_MAX, "pex-cntrl"), \
_pad(TEGRA_IO_PAD_PEX_CTL2, 33, UINT_MAX, "pex-ctl2"), \
_pad(TEGRA_IO_PAD_PEX_L0_RST_N, 34, UINT_MAX, "pex-l0-rst"), \
_pad(TEGRA_IO_PAD_PEX_L1_RST_N, 35, UINT_MAX, "pex-l1-rst"), \
_pad(TEGRA_IO_PAD_SDMMC4, 36, UINT_MAX, "sdmmc4"), \
_pad(TEGRA_IO_PAD_PEX_L5_RST_N, 37, UINT_MAX, "pex-l5-rst"), \
_pad(TEGRA_IO_PAD_CAM, 38, UINT_MAX, "cam"), \
_pad(TEGRA_IO_PAD_CSIC, 43, UINT_MAX, "csic"), \
_pad(TEGRA_IO_PAD_CSID, 44, UINT_MAX, "csid"), \
_pad(TEGRA_IO_PAD_CSIE, 45, UINT_MAX, "csie"), \
_pad(TEGRA_IO_PAD_CSIF, 46, UINT_MAX, "csif"), \
_pad(TEGRA_IO_PAD_SPI, 47, UINT_MAX, "spi"), \
_pad(TEGRA_IO_PAD_UFS, 49, UINT_MAX, "ufs"), \
_pad(TEGRA_IO_PAD_CSIG, 50, UINT_MAX, "csig"), \
_pad(TEGRA_IO_PAD_CSIH, 51, UINT_MAX, "csih"), \
_pad(TEGRA_IO_PAD_EDP, 53, UINT_MAX, "edp"), \
_pad(TEGRA_IO_PAD_SDMMC1_HV, 55, 4, "sdmmc1-hv"), \
_pad(TEGRA_IO_PAD_SDMMC3_HV, 56, 6, "sdmmc3-hv"), \
_pad(TEGRA_IO_PAD_CONN, 60, UINT_MAX, "conn"), \
_pad(TEGRA_IO_PAD_AUDIO_HV, 61, 1, "audio-hv"), \
_pad(TEGRA_IO_PAD_AO_HV, UINT_MAX, 0, "ao-hv")
static const struct tegra_io_pad_soc tegra194_io_pads[] = {
{ .id = TEGRA_IO_PAD_CSIA, .dpd = 0, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_CSIB, .dpd = 1, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_MIPI_BIAS, .dpd = 3, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_CLK_BIAS, .dpd = 4, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_CLK3, .dpd = 5, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 6, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_CLK1, .dpd = 7, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_EQOS, .dpd = 8, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_CLK2_BIAS, .dpd = 9, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 10, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_DAP3, .dpd = 11, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_DAP5, .dpd = 12, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_UART, .dpd = 14, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PWR_CTL, .dpd = 15, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_SOC_GPIO53, .dpd = 16, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_AUDIO, .dpd = 17, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_GP_PWM2, .dpd = 18, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_GP_PWM3, .dpd = 19, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_SOC_GPIO12, .dpd = 20, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_SOC_GPIO13, .dpd = 21, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_SOC_GPIO10, .dpd = 22, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_UART4, .dpd = 23, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_UART5, .dpd = 24, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_DBG, .dpd = 25, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_HDMI_DP3, .dpd = 26, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_HDMI_DP2, .dpd = 27, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_HDMI_DP0, .dpd = 28, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_HDMI_DP1, .dpd = 29, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = 32, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_CTL2, .dpd = 33, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_L0_RST_N, .dpd = 34, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_L1_RST_N, .dpd = 35, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_SDMMC4, .dpd = 36, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_PEX_L5_RST_N, .dpd = 37, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_CSIC, .dpd = 43, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_CSID, .dpd = 44, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_CSIE, .dpd = 45, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_CSIF, .dpd = 46, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_SPI, .dpd = 47, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_UFS, .dpd = 49, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_CSIG, .dpd = 50, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_CSIH, .dpd = 51, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_EDP, .dpd = 53, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_SDMMC1_HV, .dpd = 55, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_SDMMC3_HV, .dpd = 56, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_CONN, .dpd = 60, .voltage = UINT_MAX },
{ .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = UINT_MAX },
TEGRA194_IO_PAD_TABLE(TEGRA_IO_PAD)
};
static const struct pinctrl_pin_desc tegra194_pin_descs[] = {
TEGRA194_IO_PAD_TABLE(TEGRA_IO_PIN_DESC)
};
static const struct tegra_pmc_regs tegra194_pmc_regs = {
@ -2976,10 +3337,12 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
.has_tsense_reset = false,
.has_gpu_clamps = false,
.needs_mbist_war = false,
.has_impl_33v_pwr = false,
.has_impl_33v_pwr = true,
.maybe_tz_only = false,
.num_io_pads = ARRAY_SIZE(tegra194_io_pads),
.io_pads = tegra194_io_pads,
.num_pin_descs = ARRAY_SIZE(tegra194_pin_descs),
.pin_descs = tegra194_pin_descs,
.regs = &tegra194_pmc_regs,
.init = NULL,
.setup_irq_polarity = tegra186_pmc_setup_irq_polarity,
@ -2991,6 +3354,9 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
.num_reset_levels = ARRAY_SIZE(tegra186_reset_levels),
.num_wake_events = ARRAY_SIZE(tegra194_wake_events),
.wake_events = tegra194_wake_events,
.pmc_clks_data = NULL,
.num_pmc_clks = 0,
.has_blink_output = false,
};
static const struct of_device_id tegra_pmc_match[] = {

21
drivers/soc/ti/pm33xx.c
View File

@ -130,6 +130,19 @@ static int am33xx_push_sram_idle(void)
return 0;
}
static int am33xx_do_sram_idle(u32 wfi_flags)
{
int ret = 0;
if (!m3_ipc || !pm_ops)
return 0;
if (wfi_flags & WFI_FLAG_WAKE_M3)
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_IDLE);
return pm_ops->cpu_suspend(am33xx_do_wfi_sram, wfi_flags);
}
static int __init am43xx_map_gic(void)
{
gic_dist_base = ioremap(AM43XX_GIC_DIST_BASE, SZ_4K);
@ -260,6 +273,8 @@ static int am33xx_pm_begin(suspend_state_t state)
rtc_only_idle = 0;
}
pm_ops->begin_suspend();
switch (state) {
case PM_SUSPEND_MEM:
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
@ -301,6 +316,8 @@ static void am33xx_pm_end(void)
}
rtc_only_idle = 0;
pm_ops->finish_suspend();
}
static int am33xx_pm_valid(suspend_state_t state)
@ -503,7 +520,7 @@ static int am33xx_pm_probe(struct platform_device *pdev)
suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
#endif /* CONFIG_SUSPEND */
ret = pm_ops->init();
ret = pm_ops->init(am33xx_do_sram_idle);
if (ret) {
dev_err(dev, "Unable to call core pm init!\n");
ret = -ENODEV;
@ -522,6 +539,8 @@ err_free_sram:
static int am33xx_pm_remove(struct platform_device *pdev)
{
if (pm_ops->deinit)
pm_ops->deinit();
suspend_set_ops(NULL);
wkup_m3_ipc_put(m3_ipc);
am33xx_pm_free_sram();

4
include/dt-bindings/clock/tegra114-car.h
View File

@ -228,6 +228,8 @@
#define TEGRA114_CLK_CLK_M 201
#define TEGRA114_CLK_CLK_M_DIV2 202
#define TEGRA114_CLK_CLK_M_DIV4 203
#define TEGRA114_CLK_OSC_DIV2 202
#define TEGRA114_CLK_OSC_DIV4 203
#define TEGRA114_CLK_PLL_REF 204
#define TEGRA114_CLK_PLL_C 205
#define TEGRA114_CLK_PLL_C_OUT1 206
@ -274,7 +276,7 @@
#define TEGRA114_CLK_CLK_OUT_2 246
#define TEGRA114_CLK_CLK_OUT_3 247
#define TEGRA114_CLK_BLINK 248
/* 249 */
#define TEGRA114_CLK_OSC 249
/* 250 */
/* 251 */
#define TEGRA114_CLK_XUSB_HOST_SRC 252

4
include/dt-bindings/clock/tegra124-car-common.h
View File

@ -227,6 +227,8 @@
#define TEGRA124_CLK_CLK_M 201
#define TEGRA124_CLK_CLK_M_DIV2 202
#define TEGRA124_CLK_CLK_M_DIV4 203
#define TEGRA124_CLK_OSC_DIV2 202
#define TEGRA124_CLK_OSC_DIV4 203
#define TEGRA124_CLK_PLL_REF 204
#define TEGRA124_CLK_PLL_C 205
#define TEGRA124_CLK_PLL_C_OUT1 206
@ -273,7 +275,7 @@
#define TEGRA124_CLK_CLK_OUT_2 246
#define TEGRA124_CLK_CLK_OUT_3 247
#define TEGRA124_CLK_BLINK 248
/* 249 */
#define TEGRA124_CLK_OSC 249
/* 250 */
/* 251 */
#define TEGRA124_CLK_XUSB_HOST_SRC 252

4
include/dt-bindings/clock/tegra210-car.h
View File

@ -262,6 +262,8 @@
#define TEGRA210_CLK_CLK_M 233
#define TEGRA210_CLK_CLK_M_DIV2 234
#define TEGRA210_CLK_CLK_M_DIV4 235
#define TEGRA210_CLK_OSC_DIV2 234
#define TEGRA210_CLK_OSC_DIV4 235
#define TEGRA210_CLK_PLL_REF 236
#define TEGRA210_CLK_PLL_C 237
#define TEGRA210_CLK_PLL_C_OUT1 238
@ -355,7 +357,7 @@
#define TEGRA210_CLK_PLL_A_OUT_ADSP 323
#define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324
/* 325 */
/* 326 */
#define TEGRA210_CLK_OSC 326
/* 327 */
/* 328 */
/* 329 */

4
include/dt-bindings/clock/tegra30-car.h
View File

@ -196,6 +196,8 @@
#define TEGRA30_CLK_CLK_M 171
#define TEGRA30_CLK_CLK_M_DIV2 172
#define TEGRA30_CLK_CLK_M_DIV4 173
#define TEGRA30_CLK_OSC_DIV2 172
#define TEGRA30_CLK_OSC_DIV4 173
#define TEGRA30_CLK_PLL_REF 174
#define TEGRA30_CLK_PLL_C 175
#define TEGRA30_CLK_PLL_C_OUT1 176
@ -243,7 +245,7 @@
#define TEGRA30_CLK_HCLK 217
#define TEGRA30_CLK_PCLK 218
/* 219 */
/* 220 */
#define TEGRA30_CLK_OSC 220
/* 221 */
/* 222 */
/* 223 */

16
include/dt-bindings/soc/tegra-pmc.h 100644
View File

@ -0,0 +1,16 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved.
*/
#ifndef _DT_BINDINGS_SOC_TEGRA_PMC_H
#define _DT_BINDINGS_SOC_TEGRA_PMC_H
#define TEGRA_PMC_CLK_OUT_1 0
#define TEGRA_PMC_CLK_OUT_2 1
#define TEGRA_PMC_CLK_OUT_3 2
#define TEGRA_PMC_CLK_BLINK 3
#define TEGRA_PMC_CLK_MAX 4
#endif /* _DT_BINDINGS_SOC_TEGRA_PMC_H */

23
include/linux/clk/at91_pmc.h
View File

@ -12,6 +12,9 @@
#ifndef AT91_PMC_H
#define AT91_PMC_H
#define AT91_PMC_V1 (1) /* PMC version 1 */
#define AT91_PMC_V2 (2) /* PMC version 2 [SAM9X60] */
#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */
#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */
@ -30,16 +33,34 @@
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
#define AT91_PMC_PLL_CTRL0 0x0C /* PLL Control Register 0 [for SAM9X60] */
#define AT91_PMC_PLL_CTRL0_ENPLL (1 << 28) /* Enable PLL */
#define AT91_PMC_PLL_CTRL0_ENPLLCK (1 << 29) /* Enable PLL clock for PMC */
#define AT91_PMC_PLL_CTRL0_ENLOCK (1 << 31) /* Enable PLL lock */
#define AT91_PMC_PLL_CTRL1 0x10 /* PLL Control Register 1 [for SAM9X60] */
#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */
#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */
#define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */
#define AT91_PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL /* Default PLL ACR value for UPLL */
#define AT91_PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL /* Default PLL ACR value for PLLA */
#define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */
#define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */
#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
#define AT91_PMC_PLL_UPDT 0x1C /* PMC PLL update register [for SAM9X60] */
#define AT91_PMC_PLL_UPDT_UPDATE (1 << 8) /* Update PLL settings */
#define AT91_PMC_PLL_UPDT_ID (1 << 0) /* PLL ID */
#define AT91_PMC_PLL_UPDT_STUPTIM (0xff << 16) /* Startup time */
#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */
@ -180,6 +201,8 @@
#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
#define AT91_PMC_PLL_ISR0 0xEC /* PLL Interrupt Status Register 0 [SAM9X60 only] */
#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/
#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */
#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */

2
include/linux/firmware/xlnx-zynqmp.h
View File

@ -329,7 +329,7 @@ struct zynqmp_eemi_ops {
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 *ret_payload);
#if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)

6
include/linux/platform_data/pm33xx.h
View File

@ -46,9 +46,13 @@ struct am33xx_pm_sram_addr {
};
struct am33xx_pm_platform_data {
int (*init)(void);
int (*init)(int (*idle)(u32 wfi_flags));
int (*deinit)(void);
int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long),
unsigned long args);
int (*cpu_suspend)(int (*fn)(unsigned long), unsigned long args);
void (*begin_suspend)(void);
void (*finish_suspend)(void);
struct am33xx_pm_sram_addr *(*get_sram_addrs)(void);
void __iomem *(*get_rtc_base_addr)(void);
void (*save_context)(void);

2
include/soc/tegra/cpuidle.h
View File

@ -6,7 +6,7 @@
#ifndef __SOC_TEGRA_CPUIDLE_H__
#define __SOC_TEGRA_CPUIDLE_H__
#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_TEGRA) && defined(CONFIG_CPU_IDLE)
#ifdef CONFIG_ARM_TEGRA_CPUIDLE
void tegra_cpuidle_pcie_irqs_in_use(void);
#else
static inline void tegra_cpuidle_pcie_irqs_in_use(void)

8
arch/arm/mach-tegra/irq.h → include/soc/tegra/irq.h
View File

@ -3,9 +3,11 @@
* Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
*/
#ifndef __TEGRA_IRQ_H
#define __TEGRA_IRQ_H
#ifndef __SOC_TEGRA_IRQ_H
#define __SOC_TEGRA_IRQ_H
#if defined(CONFIG_ARM)
bool tegra_pending_sgi(void);
#endif
#endif /* __SOC_TEGRA_IRQ_H */

31
include/soc/tegra/pm.h
View File

@ -6,6 +6,8 @@
#ifndef __SOC_TEGRA_PM_H__
#define __SOC_TEGRA_PM_H__
#include <linux/errno.h>
enum tegra_suspend_mode {
TEGRA_SUSPEND_NONE = 0,
TEGRA_SUSPEND_LP2, /* CPU voltage off */
@ -20,6 +22,12 @@ tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode);
/* low-level resume entry point */
void tegra_resume(void);
int tegra30_pm_secondary_cpu_suspend(unsigned long arg);
void tegra_pm_clear_cpu_in_lp2(void);
void tegra_pm_set_cpu_in_lp2(void);
int tegra_pm_enter_lp2(void);
int tegra_pm_park_secondary_cpu(unsigned long cpu);
#else
static inline enum tegra_suspend_mode
tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode)
@ -30,6 +38,29 @@ tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode)
static inline void tegra_resume(void)
{
}
static inline int tegra30_pm_secondary_cpu_suspend(unsigned long arg)
{
return -ENOTSUPP;
}
static inline void tegra_pm_clear_cpu_in_lp2(void)
{
}
static inline void tegra_pm_set_cpu_in_lp2(void)
{
}
static inline int tegra_pm_enter_lp2(void)
{
return -ENOTSUPP;
}
static inline int tegra_pm_park_secondary_cpu(unsigned long cpu)
{
return -ENOTSUPP;
}
#endif /* CONFIG_PM_SLEEP */
#endif /* __SOC_TEGRA_PM_H__ */

3
include/soc/tegra/pmc.h
View File

@ -113,8 +113,9 @@ enum tegra_io_pad {
TEGRA_IO_PAD_PEX_CLK_BIAS,
TEGRA_IO_PAD_PEX_CLK1,
TEGRA_IO_PAD_PEX_CLK2,
TEGRA_IO_PAD_PEX_CLK2_BIAS,
TEGRA_IO_PAD_PEX_CLK3,
TEGRA_IO_PAD_PEX_CLK_2_BIAS,
TEGRA_IO_PAD_PEX_CLK_2,
TEGRA_IO_PAD_PEX_CNTRL,
TEGRA_IO_PAD_PEX_CTL2,
TEGRA_IO_PAD_PEX_L0_RST_N,