[ARM] 4033/1: Add separate Avila board setup code
This patch adds support for the Gateworks Avila Network Platform in a separate set of setup files to the IXDP425. This is necessary now that a driver for the Avila CF card slot is available. It also adds support for a minor variant on the Avila board known as the Loft, which has a different number of maximum PCI devices. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>hifive-unleashed-5.1
Michael-Luke Jones
Russell King
parent
6e98a2f88e
commit
0f18597195
|
|
@ -17,7 +17,7 @@ config MACH_NSLU2
|
|||
NSLU2 NAS device. For more information on this platform,
|
||||
see http://www.nslu2-linux.org
|
||||
|
||||
config ARCH_AVILA
|
||||
config MACH_AVILA
|
||||
bool "Avila"
|
||||
select PCI
|
||||
help
|
||||
|
|
@ -25,6 +25,14 @@ config ARCH_AVILA
|
|||
Avila Network Platform. For more information on this platform,
|
||||
see <file:Documentation/arm/IXP4xx>.
|
||||
|
||||
config MACH_LOFT
|
||||
bool "Loft"
|
||||
depends on MACH_AVILA
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the Giant
|
||||
Shoulder Inc Loft board (a minor variation on the standard
|
||||
Gateworks Avila Network Platform).
|
||||
|
||||
config ARCH_ADI_COYOTE
|
||||
bool "Coyote"
|
||||
select PCI
|
||||
|
|
@ -86,7 +94,7 @@ config MACH_NAS100D
|
|||
#
|
||||
config ARCH_IXDP4XX
|
||||
bool
|
||||
depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
|
||||
depends on ARCH_IXDP425 || MACH_IXDP465
|
||||
default y
|
||||
|
||||
#
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@ obj-pci-y :=
|
|||
obj-pci-n :=
|
||||
|
||||
obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
|
||||
obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
|
||||
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
|
||||
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
|
||||
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
|
||||
|
|
@ -15,6 +16,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
|
|||
obj-y += common.o
|
||||
|
||||
obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
|
||||
obj-$(CONFIG_MACH_AVILA) += avila-setup.o
|
||||
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
|
||||
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
|
||||
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,78 @@
|
|||
/*
|
||||
* arch/arm/mach-ixp4xx/avila-pci.c
|
||||
*
|
||||
* Gateworks Avila board-level PCI initialization
|
||||
*
|
||||
* Author: Michael-Luke Jones <mlj28@cam.ac.uk>
|
||||
*
|
||||
* Based on ixdp-pci.c
|
||||
* Copyright (C) 2002 Intel Corporation.
|
||||
* Copyright (C) 2003-2004 MontaVista Software, Inc.
|
||||
*
|
||||
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include <asm/mach/pci.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
void __init avila_pci_preinit(void)
|
||||
{
|
||||
set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
|
||||
set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
|
||||
set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
|
||||
set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
|
||||
|
||||
ixp4xx_pci_preinit();
|
||||
}
|
||||
|
||||
static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
|
||||
IRQ_AVILA_PCI_INTA,
|
||||
IRQ_AVILA_PCI_INTB,
|
||||
IRQ_AVILA_PCI_INTC,
|
||||
IRQ_AVILA_PCI_INTD
|
||||
};
|
||||
|
||||
int irq = -1;
|
||||
|
||||
if (slot >= 1 &&
|
||||
slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
|
||||
pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
|
||||
irq = pci_irq_table[(slot + pin - 2) % 4];
|
||||
}
|
||||
|
||||
return irq;
|
||||
}
|
||||
|
||||
struct hw_pci avila_pci __initdata = {
|
||||
.nr_controllers = 1,
|
||||
.preinit = avila_pci_preinit,
|
||||
.swizzle = pci_std_swizzle,
|
||||
.setup = ixp4xx_setup,
|
||||
.scan = ixp4xx_scan_bus,
|
||||
.map_irq = avila_map_irq,
|
||||
};
|
||||
|
||||
int __init avila_pci_init(void)
|
||||
{
|
||||
if (machine_is_avila() || machine_is_loft())
|
||||
pci_common_init(&avila_pci);
|
||||
return 0;
|
||||
}
|
||||
|
||||
subsys_initcall(avila_pci_init);
|
||||
|
||||
|
|
@ -0,0 +1,152 @@
|
|||
/*
|
||||
* arch/arm/mach-ixp4xx/avila-setup.c
|
||||
*
|
||||
* Gateworks Avila board-setup
|
||||
*
|
||||
* Author: Michael-Luke Jones <mlj28@cam.ac.uk>
|
||||
*
|
||||
* Based on ixdp-setup.c
|
||||
* Copyright (C) 2003-2005 MontaVista Software, Inc.
|
||||
*
|
||||
* Author: Deepak Saxena <dsaxena@plexity.net>
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <asm/types.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/memory.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/flash.h>
|
||||
|
||||
static struct flash_platform_data avila_flash_data = {
|
||||
.map_name = "cfi_probe",
|
||||
.width = 2,
|
||||
};
|
||||
|
||||
static struct resource avila_flash_resource = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device avila_flash = {
|
||||
.name = "IXP4XX-Flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &avila_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &avila_flash_resource,
|
||||
};
|
||||
|
||||
static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
|
||||
.sda_pin = AVILA_SDA_PIN,
|
||||
.scl_pin = AVILA_SCL_PIN,
|
||||
};
|
||||
|
||||
static struct platform_device avila_i2c_controller = {
|
||||
.name = "IXP4XX-I2C",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &avila_i2c_gpio_pins,
|
||||
},
|
||||
.num_resources = 0
|
||||
};
|
||||
|
||||
static struct resource avila_uart_resources[] = {
|
||||
{
|
||||
.start = IXP4XX_UART1_BASE_PHYS,
|
||||
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
||||
.flags = IORESOURCE_MEM
|
||||
},
|
||||
{
|
||||
.start = IXP4XX_UART2_BASE_PHYS,
|
||||
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
||||
.flags = IORESOURCE_MEM
|
||||
}
|
||||
};
|
||||
|
||||
static struct plat_serial8250_port avila_uart_data[] = {
|
||||
{
|
||||
.mapbase = IXP4XX_UART1_BASE_PHYS,
|
||||
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
||||
.irq = IRQ_IXP4XX_UART1,
|
||||
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
.iotype = UPIO_MEM,
|
||||
.regshift = 2,
|
||||
.uartclk = IXP4XX_UART_XTAL,
|
||||
},
|
||||
{
|
||||
.mapbase = IXP4XX_UART2_BASE_PHYS,
|
||||
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
||||
.irq = IRQ_IXP4XX_UART2,
|
||||
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
.iotype = UPIO_MEM,
|
||||
.regshift = 2,
|
||||
.uartclk = IXP4XX_UART_XTAL,
|
||||
},
|
||||
{ },
|
||||
};
|
||||
|
||||
static struct platform_device avila_uart = {
|
||||
.name = "serial8250",
|
||||
.id = PLAT8250_DEV_PLATFORM,
|
||||
.dev.platform_data = avila_uart_data,
|
||||
.num_resources = 2,
|
||||
.resource = avila_uart_resources
|
||||
};
|
||||
|
||||
static struct platform_device *avila_devices[] __initdata = {
|
||||
&avila_i2c_controller,
|
||||
&avila_flash,
|
||||
&avila_uart
|
||||
};
|
||||
|
||||
static void __init avila_init(void)
|
||||
{
|
||||
ixp4xx_sys_init();
|
||||
|
||||
avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||
avila_flash_resource.end =
|
||||
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
|
||||
|
||||
platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
|
||||
}
|
||||
|
||||
MACHINE_START(AVILA, "Gateworks Avila Network Platform")
|
||||
/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
|
||||
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||
.map_io = ixp4xx_map_io,
|
||||
.init_irq = ixp4xx_init_irq,
|
||||
.timer = &ixp4xx_timer,
|
||||
.boot_params = 0x0100,
|
||||
.init_machine = avila_init,
|
||||
MACHINE_END
|
||||
|
||||
/*
|
||||
* Loft is functionally equivalent to Avila except that it has a
|
||||
* different number for the maximum PCI devices. The MACHINE
|
||||
* structure below is identical to Avila except for the comment.
|
||||
*/
|
||||
#ifdef CONFIG_MACH_LOFT
|
||||
MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
|
||||
/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
|
||||
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||
.map_io = ixp4xx_map_io,
|
||||
.init_irq = ixp4xx_init_irq,
|
||||
.timer = &ixp4xx_timer,
|
||||
.boot_params = 0x0100,
|
||||
.init_machine = avila_init,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* include/asm-arm/arch-ixp4xx/avila.h
|
||||
*
|
||||
* Gateworks Avila platform specific definitions
|
||||
*
|
||||
* Author: Michael-Luke Jones <mlj28@cam.ac.uk>
|
||||
*
|
||||
* Based on ixdp425.h
|
||||
* Author: Deepak Saxena <dsaxena@plexity.net>
|
||||
*
|
||||
* Copyright 2004 (c) MontaVista, Software, Inc.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_HARDWARE_H__
|
||||
#error "Do not include this directly, instead #include <asm/hardware.h>"
|
||||
#endif
|
||||
|
||||
#define AVILA_SDA_PIN 7
|
||||
#define AVILA_SCL_PIN 6
|
||||
|
||||
/*
|
||||
* AVILA PCI IRQs
|
||||
*/
|
||||
#define AVILA_PCI_MAX_DEV 4
|
||||
#define LOFT_PCI_MAX_DEV 6
|
||||
#define AVILA_PCI_IRQ_LINES 4
|
||||
|
||||
|
||||
/* PCI controller GPIO to IRQ pin mappings */
|
||||
#define AVILA_PCI_INTA_PIN 11
|
||||
#define AVILA_PCI_INTB_PIN 10
|
||||
#define AVILA_PCI_INTC_PIN 9
|
||||
#define AVILA_PCI_INTD_PIN 8
|
||||
|
||||
|
||||
|
|
@ -42,6 +42,7 @@ extern unsigned int processor_id;
|
|||
|
||||
/* Platform specific details */
|
||||
#include "ixdp425.h"
|
||||
#include "avila.h"
|
||||
#include "coyote.h"
|
||||
#include "prpmc1100.h"
|
||||
#include "nslu2.h"
|
||||
|
|
|
|||
|
|
@ -78,6 +78,15 @@
|
|||
#define IRQ_IXDP425_PCI_INTC IRQ_IXP4XX_GPIO9
|
||||
#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8
|
||||
|
||||
/*
|
||||
* Gateworks Avila board IRQs
|
||||
*/
|
||||
#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
|
||||
#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
|
||||
#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
|
||||
#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
|
||||
|
||||
|
||||
/*
|
||||
* PrPMC1100 Board IRQs
|
||||
*/
|
||||
|
|
|
|||
Loading…
Reference in New Issue