redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: dts: apq8064: remove redundant i2c pinctrl properties 

This patch removes i2c pinctrl properties from board which which are now
mentioned in the SOC specific file. This will avoid redundant properties
across multiple board fiiles.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
hifive-unleashed-5.1
Srinivas Kandagatla 2015-09-18 13:30:13 +01:00 committed by Andy Gross
parent 9afbb3ba39
commit 0fbf6104e3
3 changed files with 4 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
View File

@ -13,15 +13,6 @@
};
soc {
pinctrl@800000 {
i2c1_pins: i2c1 {
mux {
pins = "gpio20", "gpio21";
function = "gsbi1";
};
};
};
rpm@108000 {
regulators {
vin_lvs1_3_6-supply = <&pm8921_s4>;
@ -96,8 +87,6 @@
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
eeprom: eeprom@50 {
compatible = "24c02";

5
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
View File

@ -119,8 +119,6 @@
qcom,mode = <GSBI_PROT_I2C>;
i2c3: i2c@16280000 {
status = "okay";
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
};
};
@ -131,8 +129,6 @@
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
eeprom: eeprom@52 {
compatible = "atmel,24c128";
@ -148,7 +144,6 @@
serial@16540000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&uart_pins>;
};

4
arch/arm/boot/dts/qcom-apq8064.dtsi
View File

@ -213,6 +213,8 @@
i2c1: i2c@12460000 {
compatible = "qcom,i2c-qup-v1.1.1";
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
reg = <0x12460000 0x1000>;
interrupts = <0 194 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
@ -258,6 +260,8 @@
ranges;
i2c3: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI3_QUP_CLK>,