diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c index ccd28405451c..5e32f61a2fe4 100644 --- a/drivers/infiniband/core/umem_odp.c +++ b/drivers/infiniband/core/umem_odp.c @@ -152,6 +152,7 @@ EXPORT_SYMBOL(ib_umem_odp_alloc_implicit); * ib_alloc_implicit_odp_umem() * @addr: The starting userspace VA * @size: The length of the userspace VA + * @ops: MMU interval ops, currently only @invalidate */ struct ib_umem_odp * ib_umem_odp_alloc_child(struct ib_umem_odp *root, unsigned long addr, @@ -213,6 +214,7 @@ EXPORT_SYMBOL(ib_umem_odp_alloc_child); * @addr: userspace virtual address to start at * @size: length of region to pin * @access: IB_ACCESS_xxx flags for memory being pinned + * @ops: MMU interval ops, currently only @invalidate * * The driver should use when the access flags indicate ODP memory. It avoids * pinning, instead, stores the mm for future page fault handling in diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 53d6505c0c7b..a3761d432a79 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -988,8 +988,8 @@ EXPORT_SYMBOL(rdma_destroy_ah_user); * @srq_init_attr: A list of initial attributes required to create the * SRQ. If SRQ creation succeeds, then the attributes are updated to * the actual capabilities of the created SRQ. - * @uobject - uobject pointer if this is not a kernel SRQ - * @udata - udata pointer if this is not a kernel SRQ + * @uobject: uobject pointer if this is not a kernel SRQ + * @udata: udata pointer if this is not a kernel SRQ * * srq_attr->max_wr and srq_attr->max_sge are read the determine the * requested size of the SRQ, and set to the actual values allocated diff --git a/drivers/infiniband/sw/rdmavt/ah.c b/drivers/infiniband/sw/rdmavt/ah.c index 40480add7dd3..75a04b1497c4 100644 --- a/drivers/infiniband/sw/rdmavt/ah.c +++ b/drivers/infiniband/sw/rdmavt/ah.c @@ -90,8 +90,7 @@ EXPORT_SYMBOL(rvt_check_ah); /** * rvt_create_ah - create an address handle * @ibah: the IB address handle - * @ah_attr: the attributes of the AH - * @create_flags: create address handle flags (see enum rdma_create_ah_flags) + * @init_attr: the attributes of the AH * @udata: pointer to user's input output buffer information. * * This may be called from interrupt context. diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index 1d77c7f42e38..0fd8c243ec67 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -353,6 +353,7 @@ struct iser_reg_resources { * @list: entry in connection fastreg pool * @rsc: data buffer registration resources * @sig_protected: is region protected indicator + * @all_list: first and last list members */ struct iser_fr_desc { struct list_head list; @@ -367,6 +368,7 @@ struct iser_fr_desc { * @list: list of fastreg descriptors * @lock: protects fastreg pool * @size: size of the pool + * @all_list: first and last list members */ struct iser_fr_pool { struct list_head list; diff --git a/drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h b/drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h index d324312a373c..f64519872297 100644 --- a/drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h +++ b/drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h @@ -118,12 +118,17 @@ * struct opa_vesw_info - OPA vnic switch information * @fabric_id: 10-bit fabric id * @vesw_id: 12-bit virtual ethernet switch id + * @rsvd0: reserved bytes * @def_port_mask: bitmask of default ports + * @rsvd1: reserved bytes * @pkey: partition key + * @rsvd2: reserved bytes * @u_mcast_dlid: unknown multicast dlid * @u_ucast_dlid: array of unknown unicast dlids + * @rsvd3: reserved bytes * @rc: routing control * @eth_mtu: Ethernet MTU + * @rsvd4: reserved bytes */ struct opa_vesw_info { __be16 fabric_id; @@ -150,12 +155,14 @@ struct opa_vesw_info { * struct opa_per_veswport_info - OPA vnic per port information * @port_num: port number * @eth_link_status: current ethernet link state + * @rsvd0: reserved bytes * @base_mac_addr: base mac address * @config_state: configured port state * @oper_state: operational port state * @max_mac_tbl_ent: max number of mac table entries * @max_smac_ent: max smac entries in mac table * @mac_tbl_digest: mac table digest + * @rsvd1: reserved bytes * @encap_slid: base slid for the port * @pcp_to_sc_uc: sc by pcp index for unicast ethernet packets * @pcp_to_vl_uc: vl by pcp index for unicast ethernet packets @@ -165,8 +172,10 @@ struct opa_vesw_info { * @non_vlan_vl_uc: vl for non-vlan unicast ethernet packets * @non_vlan_sc_mc: sc for non-vlan multicast ethernet packets * @non_vlan_vl_mc: vl for non-vlan multicast ethernet packets + * @rsvd2: reserved bytes * @uc_macs_gen_count: generation count for unicast macs list * @mc_macs_gen_count: generation count for multicast macs list + * @rsvd3: reserved bytes */ struct opa_per_veswport_info { __be32 port_num; @@ -294,6 +303,7 @@ struct opa_veswport_mactable { * @rx_512_1023: received packet length is >=512 and < 1023 bytes * @rx_1024_1518: received packet length is >=1024 and < 1518 bytes * @rx_1519_max: received packet length >= 1519 bytes + * @reserved: reserved bytes * * All the above are counters of corresponding conditions. */ @@ -347,16 +357,26 @@ struct opa_veswport_summary_counters { * @veswport_num: virtual ethernet switch port number * @tx_errors: transmit errors * @rx_errors: receive errors + * @rsvd0: reserved bytes * @tx_smac_filt: smac filter errors + * @rsvd1: reserved bytes + * @rsvd2: reserved bytes + * @rsvd3: reserved bytes * @tx_dlid_zero: transmit packets with invalid dlid + * @rsvd4: reserved bytes * @tx_logic: other transmit errors + * @rsvd5: reserved bytes * @tx_drop_state: packet tansmission in non-forward port state * @rx_bad_veswid: received packet with invalid vesw id + * @rsvd6: reserved bytes * @rx_runt: received ethernet packet with length < 64 bytes * @rx_oversize: received ethernet packet with length > MTU size + * @rsvd7: reserved bytes * @rx_eth_down: received packets when interface is down * @rx_drop_state: received packets in non-forwarding port state * @rx_logic: other receive errors + * @rsvd8: reserved bytes + * @rsvd9: reserved bytes * * All the above are counters of corresponding error conditions. */ @@ -447,6 +467,7 @@ struct opa_veswport_iface_macs { * struct opa_vnic_vema_mad - Generic VEMA MAD * @mad_hdr: Generic MAD header * @rmpp_hdr: RMPP header for vendor specific MADs + * @reserved: reserved bytes * @oui: Unique org identifier * @data: MAD data */ @@ -467,6 +488,7 @@ struct opa_vnic_vema_mad { * @trap_num: Trap number * @toggle_count: Notice toggle bit and count value * @issuer_lid: Trap issuer's lid + * @reserved: reserved bytes * @issuer_gid: Issuer GID (only if Report method) * @raw_data: Trap message body */ @@ -487,6 +509,7 @@ struct opa_vnic_notice_attr { * struct opa_vnic_vema_mad_trap - Generic VEMA MAD Trap * @mad_hdr: Generic MAD header * @rmpp_hdr: RMPP header for vendor specific MADs + * @reserved: reserved bytes * @oui: Unique org identifier * @notice: Notice structure */