From 127882d109316bc2cc18af931c9f9cdaf0ad98e0 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 24 Mar 2020 19:07:38 +0100 Subject: [PATCH] mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY [ Upstream commit d2f8bfa4bff5028bc40ed56b4497c32e05b0178f ] It has turned out that the sdhci-tegra controller requires the R1B response, for commands that has this response associated with them. So, converting from an R1B to an R1 response for a CMD6 for example, leads to problems with the HW busy detection support. Fix this by informing the mmc core about the requirement, via setting the host cap, MMC_CAP_NEED_RSP_BUSY. Reported-by: Bitan Biswas Reported-by: Peter Geis Suggested-by: Sowjanya Komatineni Cc: Tested-by: Sowjanya Komatineni Tested-By: Peter Geis Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin --- drivers/mmc/host/sdhci-tegra.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 403ac44a7378..a25c3a4d3f6c 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -1552,6 +1552,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev) if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50) host->mmc->caps |= MMC_CAP_1_8V_DDR; + /* R1B responses is required to properly manage HW busy detection. */ + host->mmc->caps |= MMC_CAP_NEED_RSP_BUSY; + tegra_sdhci_parse_dt(host); tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",