redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

USB/PHY patches for 5.2-rc1 

Here is the big set of USB and PHY driver patches for 5.2-rc1
 
 There is the usual set of:
 	- USB gadget updates
 	- PHY driver updates and additions
 	- USB serial driver updates and fixes
 	- typec updates and new chips supported
 	- mtu3 driver updates
 	- xhci driver updates
 	- other tiny driver updates
 
 Nothing really interesting, just constant forward progress.
 
 All of these have been in linux-next for a while with no reported
 issues.  The usb-gadget and usb-serial trees were merged a bit "late",
 but both of them had been in linux-next before they got merged here last
 Friday.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNKuwg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymRUgCfa8Ri7KrCaBR5NHQcLhbdrX90ToQAmgNw7vpo
 fqt0XpNM0CSa9O/gOr79
 =8HFh
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 5.2-rc1

  There is the usual set of:

   - USB gadget updates

   - PHY driver updates and additions

   - USB serial driver updates and fixes

   - typec updates and new chips supported

   - mtu3 driver updates

   - xhci driver updates

   - other tiny driver updates

  Nothing really interesting, just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues. The usb-gadget and usb-serial trees were merged a bit "late",
  but both of them had been in linux-next before they got merged here
  last Friday"

* tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits)
  USB: serial: f81232: implement break control
  USB: serial: f81232: add high baud rate support
  USB: serial: f81232: clear overrun flag
  USB: serial: f81232: fix interrupt worker not stop
  usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
  usb: dwc3: Fix default lpm_nyet_threshold value
  usb: dwc3: debug: Print GET_STATUS(device) tracepoint
  usb: dwc3: Do core validation early on probe
  usb: dwc3: gadget: Set lpm_capable
  usb: gadget: atmel: tie wake lock to running clock
  usb: gadget: atmel: support USB suspend
  usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
  dwc2: gadget: Fix completed transfer size calculation in DDMA
  usb: dwc2: Set lpm mode parameters depend on HW configuration
  usb: dwc2: Fix channel disable flow
  usb: dwc2: Set actual frame number for completed ISOC transfer
  usb: gadget: do not use __constant_cpu_to_le16
  usb: dwc2: gadget: Increase descriptors count for ISOC's
  usb: introduce usb_ep_type_string() function
  usb: dwc3: move synchronize_irq() out of the spinlock protected block
  ...
hifive-unleashed-5.2
Linus Torvalds 2019-05-08 10:03:52 -07:00
parent 80f232121b 3515468a87
commit 132d68d37d
206 changed files with 12173 additions and 3318 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Documentation/ABI/testing/sysfs-driver-ucsi-ccg 100644
View File

@ -0,0 +1,6 @@
What: /sys/bus/i2c/drivers/ucsi_ccg/.../do_flash
Date: May 2019
Contact: Ajay Gupta <ajayg@nvidia.com>
Description:
Tell the driver for Cypress CCGx Type-C controller to attempt
firmware upgrade by writing [Yy1] to the file.

27
Documentation/ABI/testing/usb-uevent 100644
View File

@ -0,0 +1,27 @@
What: Raise a uevent when a USB Host Controller has died
Date: 2019-04-17
KernelVersion: 5.2
Contact: linux-usb@vger.kernel.org
Description: When the USB Host Controller has entered a state where it is no
longer functional a uevent will be raised. The uevent will
contain ACTION=offline and ERROR=DEAD.
Here is an example taken using udevadm monitor -p:
KERNEL[130.428945] offline /devices/pci0000:00/0000:00:10.0/usb2 (usb)
ACTION=offline
BUSNUM=002
DEVNAME=/dev/bus/usb/002/001
DEVNUM=001
DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2
DEVTYPE=usb_device
DRIVER=usb
ERROR=DEAD
MAJOR=189
MINOR=128
PRODUCT=1d6b/2/414
SEQNUM=2168
SUBSYSTEM=usb
TYPE=9/0/1
Users: chromium-os-dev@chromium.org

32
Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt 100644
View File

@ -0,0 +1,32 @@
Broadcom Stingray USB PHY
Required properties:
- compatible : should be one of the listed compatibles
- "brcm,sr-usb-combo-phy" is combo PHY has two PHYs, one SS and one HS.
- "brcm,sr-usb-hs-phy" is a single HS PHY.
- reg: offset and length of the PHY blocks registers
- #phy-cells:
- Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate
the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY.
- Must be 0 for brcm,sr-usb-hs-phy.
Refer to phy/phy-bindings.txt for the generic PHY binding properties
Example:
usbphy0: usb-phy@0 {
compatible = "brcm,sr-usb-combo-phy";
reg = <0x00000000 0x100>;
#phy-cells = <1>;
};
usbphy1: usb-phy@10000 {
compatible = "brcm,sr-usb-combo-phy";
reg = <0x00010000 0x100>,
#phy-cells = <1>;
};
usbphy2: usb-phy@20000 {
compatible = "brcm,sr-usb-hs-phy";
reg = <0x00020000 0x100>,
#phy-cells = <0>;
};

3
Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
View File

@ -7,6 +7,9 @@ Required properties:
- clocks: phandles to the clocks for each clock listed in clock-names
- clock-names: must contain "phy"
Optional properties:
- vbus-supply: A phandle to the regulator for USB VBUS.
Example:
usb3_phy0: phy@381f0040 {
compatible = "fsl,imx8mq-usb-phy";

22
Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt 100644
View File

@ -0,0 +1,22 @@
* Amlogic G12A USB2 PHY binding
Required properties:
- compatible: Should be "amlogic,meson-g12a-usb2-phy"
- reg: The base address and length of the registers
- #phys-cells: must be 0 (see phy-bindings.txt in this directory)
- clocks: a phandle to the clock of this PHY
- clock-names: must be "xtal"
- resets: a phandle to the reset line of this PHY
- reset-names: must be "phy"
- phy-supply: see phy-bindings.txt in this directory
Example:
usb2_phy0: phy@36000 {
compatible = "amlogic,g12a-usb2-phy";
reg = <0x0 0x36000 0x0 0x2000>;
clocks = <&xtal>;
clock-names = "xtal";
resets = <&reset RESET_USB_PHY21>;
reset-names = "phy";
#phy-cells = <0>;
};

22
Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt 100644
View File

@ -0,0 +1,22 @@
* Amlogic G12A USB3 + PCIE Combo PHY binding
Required properties:
- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy"
- #phys-cells: must be 1. The cell number is used to select the phy mode
as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
- reg: The base address and length of the registers
- clocks: a phandle to the 100MHz reference clock of this PHY
- clock-names: must be "ref_clk"
- resets: phandle to the reset lines for the PHY control
- reset-names: must be "phy"
Example:
usb3_pcie_phy: phy@46000 {
compatible = "amlogic,g12a-usb3-pcie-phy";
reg = <0x0 0x46000 0x0 0x2000>;
clocks = <&clkc CLKID_PCIE_PLL>;
clock-names = "ref_clk";
resets = <&reset RESET_PCIE_PHY>;
reset-names = "phy";
#phy-cells = <1>;
};

9
Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
View File

@ -36,11 +36,20 @@ Required properties:
- Tegra124: "nvidia,tegra124-xusb-padctl"
- Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
- Tegra210: "nvidia,tegra210-xusb-padctl"
- Tegra186: "nvidia,tegra186-xusb-padctl"
- reg: Physical base address and length of the controller's registers.
- resets: Must contain an entry for each entry in reset-names.
- reset-names: Must include the following entries:
- "padctl"
For Tegra186:
- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY
power supply. Must supply 1.8 V.
- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
3.3 V.
- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
Pad nodes:
==========

26
Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt 100644
View File

@ -0,0 +1,26 @@
Hisilicon hi3660 USB PHY
-----------------------
Required properties:
- compatible: should be "hisilicon,hi3660-usb-phy"
- #phy-cells: must be 0
- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
- hisilicon,eye-diagram-param: parameter set for phy
Refer to phy/phy-bindings.txt for the generic PHY binding properties
This is a subnode of usb3_otg_bc register node.
Example:
usb3_otg_bc: usb3_otg_bc@ff200000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0xff200000 0x0 0x1000>;
usb-phy {
compatible = "hisilicon,hi3660-usb-phy";
#phy-cells = <0>;
hisilicon,pericrg-syscon = <&crg_ctrl>;
hisilicon,pctrl-syscon = <&pctrl>;
hisilicon,eye-diagram-param = <0x22466e4>;
};
};

38
Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt 100644
View File

@ -0,0 +1,38 @@
MediaTek Universal Flash Storage (UFS) M-PHY binding
--------------------------------------------------------
UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
Each UFS M-PHY node should have its own node.
To bind UFS M-PHY with UFS host controller, the controller node should
contain a phandle reference to UFS M-PHY node.
Required properties for UFS M-PHY nodes:
- compatible : Compatible list, contains the following controller:
"mediatek,mt8183-ufsphy" for ufs phy
persent on MT81xx chipsets.
- reg : Address and length of the UFS M-PHY register set.
- #phy-cells : This property shall be set to 0.
- clocks : List of phandle and clock specifier pairs.
- clock-names : List of clock input name strings sorted in the same
order as the clocks property. Following clocks are
mandatory.
"unipro": Unipro core control clock.
"mp": M-PHY core control clock.
Example:
ufsphy: phy@11fa0000 {
compatible = "mediatek,mt8183-ufsphy";
reg = <0 0x11fa0000 0 0xc000>;
#phy-cells = <0>;
clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>,
<&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>;
clock-names = "unipro", "mp";
};
ufshci@11270000 {
...
phys = <&ufsphy>;
};

14
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
View File

@ -11,6 +11,7 @@ Required properties:
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
"qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
"qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
"qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
"qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
@ -48,6 +49,8 @@ Required properties:
"aux", "cfg_ahb", "ref".
For "qcom,msm8998-qmp-ufs-phy" must contain:
"ref", "ref_aux".
For "qcom,msm8998-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
@ -59,7 +62,8 @@ Required properties:
one for each entry in reset-names.
- reset-names: "phy" for reset of phy block,
"common" for phy common block reset,
"cfg" for phy's ahb cfg block reset.
"cfg" for phy's ahb cfg block reset,
"ufsphy" for the PHY reset in the UFS controller.
For "qcom,ipq8074-qmp-pcie-phy" must contain:
"phy", "common".
@ -69,12 +73,16 @@ Required properties:
"phy", "common".
For "qcom,msm8998-qmp-usb3-phy" must contain
"phy", "common".
For "qcom,msm8998-qmp-ufs-phy": no resets are listed.
For "qcom,msm8998-qmp-ufs-phy": must contain:
"ufsphy".
For "qcom,msm8998-qmp-pcie-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
"phy", "common".
For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
For "qcom,sdm845-qmp-ufs-phy": must contain:
"ufsphy".
- vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.

57
Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
View File

@ -7,6 +7,7 @@ Required properties:
- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
"renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
"renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
"renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC.
"renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
"renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
@ -30,7 +31,7 @@ channels. These subnodes must contain the following properties:
- #phy-cells: see phy-bindings.txt in the same directory, must be <1>.
The phandle's argument in the PHY specifier is the USB controller selector for
the USB channel; see the selector meanings below:
the USB channel other than r8a77470 SoC; see the selector meanings below:
+-----------+---------------+---------------+
|\ Selector | | |
@ -41,6 +42,16 @@ the USB channel; see the selector meanings below:
| 2 | PCI EHCI/OHCI | xHCI |
+-----------+---------------+---------------+
For r8a77470 SoC;see the selector meaning below:
+-----------+---------------+---------------+
|\ Selector | | |
+ --------- + 0 | 1 |
| Channel \| | |
+-----------+---------------+---------------+
| 0 | EHCI/OHCI | HS-USB |
+-----------+---------------+---------------+
Example (Lager board):
usb-phy@e6590100 {
@ -48,15 +59,53 @@ Example (Lager board):
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 704>;
usb-channel@0 {
usb0: usb-channel@0 {
reg = <0>;
#phy-cells = <1>;
};
usb-channel@2 {
usb2: usb-channel@2 {
reg = <2>;
#phy-cells = <1>;
};
};
Example (iWave RZ/G1C sbc):
usbphy0: usb-phy0@e6590100 {
compatible = "renesas,usb-phy-r8a77470",
"renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 704>;
usb0: usb-channel@0 {
reg = <0>;
#phy-cells = <1>;
};
};
usbphy1: usb-phy@e6598100 {
compatible = "renesas,usb-phy-r8a77470",
"renesas,rcar-gen2-usb-phy";
reg = <0 0xe6598100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cpg CPG_MOD 706>;
clock-names = "usbhs";
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 706>;
usb1: usb-channel@0 {
reg = <0>;
#phy-cells = <1>;
};
};

14
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
View File

@ -1,10 +1,12 @@
* Renesas R-Car generation 3 USB 2.0 PHY
This file provides information on what the device node for the R-Car generation
3 and RZ/G2 USB 2.0 PHY contain.
3, RZ/G1C and RZ/G2 USB 2.0 PHY contain.
Required properties:
- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
- compatible: "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
SoC.
"renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
SoC.
"renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
SoC.
@ -27,7 +29,13 @@ Required properties:
- reg: offset and length of the partial USB 2.0 Host register block.
- clocks: clock phandle and specifier pair(s).
- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
using <0> is deprecated).
The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
- 1 = USBH_INTA (OHCI)
- 2 = USBH_INTB (EHCI)
- 3 = UCOM_INT (OTG and BC)
Optional properties:
To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are

8
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
View File

@ -7,12 +7,15 @@ Required properties:
- reg: PHY register address offset and length in "general
register files"
Optional clocks using the clock bindings (see ../clock/clock-bindings.txt),
specified by name:
Optional properties:
- clock-names: Should contain "emmcclk". Although this is listed as optional
(because most boards can get basic functionality without having
access to it), it is strongly suggested.
See ../clock/clock-bindings.txt for details.
- clocks: Should have a phandle to the card clock exported by the SDHCI driver.
- drive-impedance-ohm: Specifies the drive impedance in Ohm.
Possible values are 33, 40, 50, 66 and 100.
If not set, the default value of 50 will be applied.
Example:
@ -29,6 +32,7 @@ grf: syscon@ff770000 {
reg = <0xf780 0x20>;
clocks = <&sdhci>;
clock-names = "emmcclk";
drive-impedance-ohm = <50>;
#phy-cells = <0>;
};
};

82
Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt 100644
View File

@ -0,0 +1,82 @@
TI AM654 SERDES
Required properties:
- compatible: Should be "ti,phy-am654-serdes"
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy. Should be "2". The 1st cell
corresponds to the phy type (should be one of the types specified in
include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
lane function.
If SERDES0 is referenced 2nd cell should be:
0 - USB3
1 - PCIe0 Lane0
2 - ICSS2 SGMII Lane0
If SERDES1 is referenced 2nd cell should be:
0 - PCIe1 Lane0
1 - PCIe0 Lane1
2 - ICSS2 SGMII Lane1
- power-domains: As documented by the generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
- clocks: List of clock-specifiers representing the input to the SERDES.
Should have 3 items representing the left input clock, external
reference clock and right input clock in that order.
- clock-output-names: List of clock names for each of the clock outputs of
SERDES. Should have 3 items for CMU reference clock,
left output clock and right output clock in that order.
- assigned-clocks: As defined in
Documentation/devicetree/bindings/clock/clock-bindings.txt
- assigned-clock-parents: As defined in
Documentation/devicetree/bindings/clock/clock-bindings.txt
- #clock-cells: Should be <1> to choose between the 3 output clocks.
Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt
The following macros are defined in dt-bindings/phy/phy-am654-serdes.h
for selecting the correct reference clock. This can be used while
specifying the clocks created by SERDES.
=> AM654_SERDES_CMU_REFCLK
=> AM654_SERDES_LO_REFCLK
=> AM654_SERDES_RO_REFCLK
- mux-controls: Phandle to the multiplexer that is used to select the lane
function. See #phy-cells above to see the multiplex values.
Example:
Example for SERDES0 is given below. It has 3 clock inputs;
left input reference clock as indicated by <&k3_clks 153 4>, external
reference clock as indicated by <&k3_clks 153 1> and right input
reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The
right input of SERDES0 is connected to the left output of SERDES1).
SERDES0 registers 3 clock outputs as indicated in clock-output-names. The
first refers to the CMU reference clock, second refers to the left output
reference clock and the third refers to the right output reference clock.
The assigned-clocks and assigned-clock-parents is used here to set the
parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of
CMU reference clock to left input reference clock.
serdes0: serdes@900000 {
compatible = "ti,phy-am654-serdes";
reg = <0x0 0x900000 0x0 0x2000>;
reg-names = "serdes";
#phy-cells = <2>;
power-domains = <&k3_pds 153>;
clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
<&serdes1 AM654_SERDES_LO_REFCLK>;
clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk",
"serdes0_ro_refclk";
assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
ti,serdes-clk = <&serdes0_clk>;
mux-controls = <&serdes_mux 0>;
#clock-cells = <1>;
};
Example for PCIe consumer node using the SERDES PHY specifier is given below.
&pcie0_rc {
num-lanes = <2>;
phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
phy-names = "pcie-phy0", "pcie-phy1";
};

5
Documentation/devicetree/bindings/ufs/ufs-qcom.txt
View File

@ -29,6 +29,7 @@ Optional properties:
- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
- resets : specifies the PHY reset in the UFS controller
Example:
@ -51,9 +52,11 @@ Example:
<&clock_gcc clk_ufs_phy_ldo>,
<&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
resets = <&ufshc 0>;
};
ufshc@fc598000 {
ufshc: ufshc@fc598000 {
#reset-cells = <1>;
...
phys = <&ufsphy1>;
phy-names = "ufsphy";

3
Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
View File

@ -50,6 +50,8 @@ Optional properties:
-lanes-per-direction : number of lanes available per direction - either 1 or 2.
Note that it is assume same number of lanes is used both
directions at once. If not specified, default is 2 lanes per direction.
- #reset-cells : Must be <1> for Qualcomm UFS controllers that expose
PHY reset from the UFS controller.
- resets : reset node register
- reset-names : describe reset node register, the "rst" corresponds to reset the whole UFS IP.
@ -79,4 +81,5 @@ Example:
reset-names = "rst";
phys = <&ufsphy1>;
phy-names = "ufsphy";
#reset-cells = <1>;
};

88
Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
View File

@ -40,3 +40,91 @@ Example device nodes:
phy-names = "usb2-phy", "usb3-phy";
};
};
Amlogic Meson G12A DWC3 USB SoC Controller Glue
The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
only.
A glue connects the DWC3 core to USB2 PHYs and optionnaly to an USB3 PHY.
One of the USB2 PHY can be re-routed in peripheral mode to a DWC2 USB IP.
The DWC3 Glue controls the PHY routing and power, an interrupt line is
connected to the Glue to serve as OTG ID change detection.
Required properties:
- compatible: Should be "amlogic,meson-g12a-usb-ctrl"
- clocks: a handle for the "USB" clock
- resets: a handle for the shared "USB" reset line
- reg: The base address and length of the registers
- interrupts: the interrupt specifier for the OTG detection
- phys: handle to used PHYs on the system
- a <0> phandle can be used if a PHY is not used
- phy-names: names of the used PHYs on the system :
- "usb2-phy0" for USB2 PHY0 if USBHOST_A port is used
- "usb2-phy1" for USB2 PHY1 if USBOTG_B port is used
- "usb3-phy0" for USB3 PHY if USB3_0 is used
- dr_mode: should be "host", "peripheral", or "otg" depending on
the usage and configuration of the OTG Capable port.
- "host" and "peripheral" means a fixed Host or Device only connection
- "otg" means the port can be used as both Host or Device and
be switched automatically using the OTG ID pin.
Optional properties:
- vbus-supply: should be a phandle to the regulator controlling the VBUS
power supply when used in OTG switchable mode
Required child nodes:
A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
A child node must exist to represent the core DWC2 IP block. The name of
the node is not important. The content of the node is defined in dwc2.txt.
PHY documentation is provided in the following places:
- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
Example device nodes:
usb: usb@ffe09000 {
compatible = "amlogic,meson-g12a-usb-ctrl";
reg = <0x0 0xffe09000 0x0 0xa0>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&clkc CLKID_USB>;
resets = <&reset RESET_USB>;
dr_mode = "otg";
phys = <&usb2_phy0>, <&usb2_phy1>,
<&usb3_pcie_phy PHY_TYPE_USB3>;
phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
dwc2: usb@ff400000 {
compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
phys = <&usb2_phy1>;
dr_mode = "peripheral";
g-rx-fifo-size = <192>;
g-np-tx-fifo-size = <128>;
g-tx-fifo-size = <128 128 16 16 16>;
};
dwc3: usb@ff500000 {
compatible = "snps,dwc3";
reg = <0x0 0xff500000 0x0 0x100000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
snps,quirk-frame-length-adjustment;
};
};

7
Documentation/devicetree/bindings/usb/dwc2.txt
View File

@ -14,6 +14,7 @@ Required properties:
- "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- "amlogic,meson-g12a-usb": The DWC2 USB controller instance in Amlogic G12A SoCs;
- "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
- snps,dwc2: A generic DWC2 USB controller with default parameters.
- "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
@ -31,12 +32,18 @@ Refer to clk/clock-bindings.txt for generic clock consumer properties
Optional properties:
- phys: phy provider specifier
- phy-names: shall be "usb2-phy"
- vbus-supply: reference to the VBUS regulator. Depending on the current mode
this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
regulator is updated if the controller is configured in "otg" mode and the
status changes between "host" and "peripheral".
Refer to phy/phy-bindings.txt for generic phy consumer properties
- dr_mode: shall be one of "host", "peripheral" and "otg"
Refer to usb/generic.txt
- g-rx-fifo-size: size of rx fifo size in gadget mode.
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
we detect a wakeup. This is due to a hardware errata.
Deprecated properties:
- g-use-dma: gadget DMA mode is automatically detected

95
Documentation/devicetree/bindings/usb/generic-ehci.yaml 100644
View File

@ -0,0 +1,95 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: USB EHCI Controller Device Tree Bindings
allOf:
- $ref: "usb-hcd.yaml"
maintainers:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
properties:
compatible:
contains:
const: generic-ehci
reg:
maxItems: 1
interrupts:
maxItems: 1
resets:
minItems: 1
maxItems: 4
clocks:
minItems: 1
maxItems: 4
description: |
In case the Renesas R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second
one should be peripheral
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors and big
endian registers.
big-endian-desc:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors.
big-endian-regs:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian registers.
has-transaction-translator:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag if EHCI has a Transaction Translator built into
the root hub.
needs-reset-on-resume:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag to force EHCI reset after resume.
phys: true
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "generic-ehci";
interrupt-parent = <&UIC0>;
interrupts = <0x1a 4>;
reg = <0 0xe0000300 90 0 0xe0000390 70>;
big-endian;
};
- |
ehci0: usb@1c14000 {
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
};
...

89
Documentation/devicetree/bindings/usb/generic-ohci.yaml 100644
View File

@ -0,0 +1,89 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: USB OHCI Controller Device Tree Bindings
allOf:
- $ref: "usb-hcd.yaml"
maintainers:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
properties:
compatible:
contains:
const: generic-ohci
reg:
maxItems: 1
interrupts:
maxItems: 1
resets:
minItems: 1
maxItems: 2
clocks:
minItems: 1
maxItems: 3
description: |
In case the Renesas R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second
one should be peripheral
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors and big
endian registers.
big-endian-desc:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors.
big-endian-regs:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian registers.
remote-wakeup-connected:
$ref: /schemas/types.yaml#/definitions/flag
description:
Remote wakeup is wired on the platform.
no-big-frame-no:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set if frame_no lives in bits [15:0] of HCCA
num-ports:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Overrides the detected port count
phys: true
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
ohci0: usb@1c14400 {
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
};
...

8
Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
View File

@ -8,9 +8,15 @@ Required properties:
- interrupt-names: must be "mc"
- clocks: phandle to the "udc" clock
- clock-names: must be "udc"
- phys: phandle to the USB PHY
Example:
usb_phy: usb-phy@0 {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
udc: usb@13040000 {
compatible = "ingenic,jz4740-musb";
reg = <0x13040000 0x10000>;
@ -21,4 +27,6 @@ udc: usb@13040000 {
clocks = <&cgu JZ4740_CLK_UDC>;
clock-names = "udc";
phys = <&usb_phy>;
};

4
Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt
View File

@ -10,6 +10,7 @@ Required properties:
- Tegra124: "nvidia,tegra124-xusb"
- Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
- Tegra210: "nvidia,tegra210-xusb"
- Tegra186: "nvidia,tegra186-xusb"
- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
registers and XUSB IPFS registers.
- reg-names: Must contain the following entries:
@ -59,6 +60,8 @@ For Tegra210:
- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
For Tegra210 and Tegra186:
- power-domains: A list of PM domain specifiers that reference each power-domain
used by the xHCI controller. This list must comprise of a specifier for the
XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
@ -78,6 +81,7 @@ Optional properties:
- Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
- Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
usb3-3
- Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2
Example:
--------

1
Documentation/devicetree/bindings/usb/renesas_usbhs.txt
View File

@ -6,6 +6,7 @@ Required properties:
- "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device
- "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device
- "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
- "renesas,usbhs-r8a77470" for r8a77470 (RZ/G1C) compatible device
- "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device
- "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device
- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device

46
Documentation/devicetree/bindings/usb/usb-ehci.txt
View File

@ -1,46 +0,0 @@
USB EHCI controllers
Required properties:
- compatible : should be "generic-ehci".
- reg : should contain at least address and length of the standard EHCI
register set for the device. Optional platform-dependent registers
(debug-port or other) can be also specified here, but only after
definition of standard EHCI registers.
- interrupts : one EHCI interrupt should be described here.
Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- needs-reset-on-resume : boolean, set this to force EHCI reset after resume
- has-transaction-translator : boolean, set this if EHCI have a Transaction
Translator built into the root hub.
- clocks : a list of phandle + clock specifier pairs. In case of Renesas
R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second one
should be peripheral.
- phys : see usb-hcd.txt in the current directory
- resets : phandle + reset specifier pair
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example (Sequoia 440EPx):
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
interrupts = <1a 4>;
reg = <0 e0000300 90 0 e0000390 70>;
big-endian;
};
Example (Allwinner sun4i A10 SoC):
ehci0: usb@1c14000 {
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
};

9
Documentation/devicetree/bindings/usb/usb-hcd.txt
View File

@ -1,9 +0,0 @@
Generic USB HCD (Host Controller Device) Properties
Optional properties:
- phys: a list of all USB PHYs on this HCD
Example:
&usb1 {
phys = <&usb2_phy1>, <&usb3_phy1>;
};

25
Documentation/devicetree/bindings/usb/usb-hcd.yaml 100644
View File

@ -0,0 +1,25 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/usb-hcd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Generic USB Host Controller Device Tree Bindings
maintainers:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
properties:
$nodename:
pattern: "^usb(@.*)?"
phys:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
List of all the USB PHYs on this HCD
examples:
- |
usb {
phys = <&usb2_phy1>, <&usb3_phy1>;
};

35
Documentation/devicetree/bindings/usb/usb-ohci.txt
View File

@ -1,35 +0,0 @@
USB OHCI controllers
Required properties:
- compatible : "generic-ohci"
- reg : ohci controller register range (address and length)
- interrupts : ohci controller interrupt
Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
- remote-wakeup-connected: remote wakeup is wired on the platform
- num-ports : u32, to override the detected port count
- clocks : a list of phandle + clock specifier pairs. In case of Renesas
R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second one
should be peripheral.
- phys : see usb-hcd.txt in the current directory
- resets : a list of phandle + reset specifier pairs
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example:
ohci0: usb@1c14400 {
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
phy-names = "usb";
};

1
Documentation/devicetree/bindings/usb/usb-xhci.txt
View File

@ -10,6 +10,7 @@ Required properties:
- "renesas,xhci-r8a7743" for r8a7743 SoC
- "renesas,xhci-r8a7744" for r8a7744 SoC
- "renesas,xhci-r8a774a1" for r8a774a1 SoC
- "renesas,xhci-r8a774c0" for r8a774c0 SoC
- "renesas,xhci-r8a7790" for r8a7790 SoC
- "renesas,xhci-r8a7791" for r8a7791 SoC
- "renesas,xhci-r8a7793" for r8a7793 SoC

6
Documentation/devicetree/bindings/usb/usb251xb.txt
View File

@ -64,8 +64,10 @@ Optional properties :
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
- swap-dx-lanes : Specifies the ports which will swap the differential-pair
(D+/D-), default is not-swapped.
- swap-dx-lanes : Specifies the downstream ports which will swap the
differential-pair (D+/D-), default is not-swapped.
- swap-us-lanes : Selects the upstream port differential-pair (D+/D-)
swapping (boolean, default is not-swapped)
Examples:
usb2512b@2c {

56
Documentation/usb/WUSB-Design-overview.txt
View File

@ -1,7 +1,9 @@
================================
Linux UWB + Wireless USB + WiNET
================================
Copyright (C) 2005-2006 Intel Corporation
(C) 2005-2006 Intel Corporation
Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This program is free software; you can redistribute it and/or
@ -29,6 +31,7 @@ drivers for the USB based UWB radio controllers defined in the
Wireless USB 1.0 specification (including Wireless USB host controller
and an Intel WiNET controller).
.. Contents
1. Introduction
1. HWA: Host Wire adapters, your Wireless USB dongle
@ -51,7 +54,8 @@ and an Intel WiNET controller).
4. Glossary
Introduction
Introduction
============
UWB is a wide-band communication protocol that is to serve also as the
low-level protocol for others (much like TCP sits on IP). Currently
@ -93,7 +97,8 @@ The different logical parts of this driver are:
do the actual WUSB.
HWA: Host Wire adapters, your Wireless USB dongle
HWA: Host Wire adapters, your Wireless USB dongle
-------------------------------------------------
WUSB also defines a device called a Host Wire Adaptor (HWA), which in
mere terms is a USB dongle that enables your PC to have UWB and Wireless
@ -125,7 +130,8 @@ The HWA itself is broken in two or three main interfaces:
their type and kick into gear.
DWA: Device Wired Adaptor, a Wireless USB hub for wired devices
DWA: Device Wired Adaptor, a Wireless USB hub for wired devices
---------------------------------------------------------------
These are the complement to HWAs. They are a USB host for connecting
wired devices, but it is connected to your PC connected via Wireless
@ -137,7 +143,8 @@ code with the HWA-RC driver; there is a bunch of factorization work that
has been done to support that in upcoming releases.
WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter
WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter
-------------------------------------------------------------------
This is your usual PCI device that implements WHCI. Similar in concept
to EHCI, it allows your wireless USB devices (including DWAs) to connect
@ -148,7 +155,8 @@ There is still no driver support for this, but will be in upcoming
releases.
The UWB stack
The UWB stack
=============
The main mission of the UWB stack is to keep a tally of which devices
are in radio proximity to allow drivers to connect to them. As well, it
@ -156,7 +164,8 @@ provides an API for controlling the local radio controllers (RCs from
now on), such as to start/stop beaconing, scan, allocate bandwidth, etc.
Devices and hosts: the basic structure
Devices and hosts: the basic structure
--------------------------------------
The main building block here is the UWB device (struct uwb_dev). For
each device that pops up in radio presence (ie: the UWB host receives a
@ -187,7 +196,8 @@ the USB connected HWA. Eventually, drivers/whci-rc.c will do the same
for the PCI connected WHCI controller.
Host Controller life cycle
Host Controller life cycle
--------------------------
So let's say we connect a dongle to the system: it is detected and
firmware uploaded if needed [for Intel's i1480
@ -209,7 +219,8 @@ When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/
takes time of tearing everything down safely (or not...).
On the air: beacons and enumerating the radio neighborhood
On the air: beacons and enumerating the radio neighborhood
----------------------------------------------------------
So assuming we have devices and we have agreed for a channel to connect
on (let's say 9), we put the new RC to beacon:
@ -235,12 +246,14 @@ are received in some time, the device is considered gone and wiped out
the beacon cache of dead devices].
Device lists
Device lists
------------
All UWB devices are kept in the list of the struct bus_type uwb_bus_type.
Bandwidth allocation
Bandwidth allocation
--------------------
The UWB stack maintains a local copy of DRP availability through
processing of incoming *DRP Availability Change* notifications. This
@ -260,7 +273,8 @@ completion. [Note: The bandwidth reservation work is in progress and
subject to change.]
Wireless USB Host Controller drivers
Wireless USB Host Controller drivers
====================================
*WARNING* This section needs a lot of work!
@ -296,7 +310,8 @@ starts sending MMCs.
Now it all depends on external stimuli.
*New device connection*
New device connection
---------------------
A new device pops up, it scans the radio looking for MMCs that give out
the existence of Wireless USB channels. Once one (or more) are found,
@ -322,7 +337,8 @@ has seen the port status changes, as we have been toggling them. It will
start enumerating and doing transfers through usb_hcd->urb_enqueue() to
read descriptors and move our data.
*Device life cycle and keep alives*
Device life cycle and keep alives
---------------------------------
Every time there is a successful transfer to/from a device, we update a
per-device activity timestamp. If not, every now and then we check and
@ -340,7 +356,8 @@ device list looking for whom needs refreshing.
If the device wants to disconnect, it will either die (ugly) or send a
/DN_Disconnect/ that will prompt a disconnection from the system.
*Sending and receiving data*
Sending and receiving data
--------------------------
Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is
/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and
@ -394,7 +411,8 @@ finalize the transfer.
For IN xfers, we only issue URBs for the segments we want to read and
then wait for the xfer result data.
*URB mapping into xfers*
URB mapping into xfers
^^^^^^^^^^^^^^^^^^^^^^
This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an
rpipe to the endpoint where we have to transmit, create a transfer
@ -407,7 +425,8 @@ and not yet done and when all that is done, the xfer callback will be
called--this will call the URB callback.
Glossary
Glossary
========
*DWA* -- Device Wire Adapter
@ -436,4 +455,3 @@ the host.
Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by
InakyPerezGonzalez)

156
Documentation/usb/acm.txt
View File

@ -1,127 +1,131 @@
Linux ACM driver v0.16
(c) 1999 Vojtech Pavlik <vojtech@suse.cz>
Sponsored by SuSE
----------------------------------------------------------------------------
======================
Linux ACM driver v0.16
======================
Copyright (c) 1999 Vojtech Pavlik <vojtech@suse.cz>
Sponsored by SuSE
0. Disclaimer
~~~~~~~~~~~~~
This program is free software; you can redistribute it and/or modify it
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307 USA
Should you need to contact me, the author, you can do so either by e-mail
- mail your message to <vojtech@suse.cz>, or by paper mail: Vojtech Pavlik,
Should you need to contact me, the author, you can do so either by e-mail -
mail your message to <vojtech@suse.cz>, or by paper mail: Vojtech Pavlik,
Ucitelska 1576, Prague 8, 182 00 Czech Republic
For your convenience, the GNU General Public License version 2 is included
For your convenience, the GNU General Public License version 2 is included
in the package: See the file COPYING.
1. Usage
~~~~~~~~
The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal
The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal
adapters that conform to the Universal Serial Bus Communication Device Class
Abstract Control Model (USB CDC ACM) specification.
Many modems do, here is a list of those I know of:
Many modems do, here is a list of those I know of:
3Com OfficeConnect 56k
3Com Voice FaxModem Pro
3Com Sportster
MultiTech MultiModem 56k
Zoom 2986L FaxModem
Compaq 56k FaxModem
ELSA Microlink 56k
- 3Com OfficeConnect 56k
- 3Com Voice FaxModem Pro
- 3Com Sportster
- MultiTech MultiModem 56k
- Zoom 2986L FaxModem
- Compaq 56k FaxModem
- ELSA Microlink 56k
I know of one ISDN TA that does work with the acm driver:
I know of one ISDN TA that does work with the acm driver:
3Com USR ISDN Pro TA
- 3Com USR ISDN Pro TA
Some cell phones also connect via USB. I know the following phones work:
Some cell phones also connect via USB. I know the following phones work:
SonyEricsson K800i
- SonyEricsson K800i
Unfortunately many modems and most ISDN TAs use proprietary interfaces and
Unfortunately many modems and most ISDN TAs use proprietary interfaces and
thus won't work with this drivers. Check for ACM compliance before buying.
To use the modems you need these modules loaded:
To use the modems you need these modules loaded::
usbcore.ko
uhci-hcd.ko ohci-hcd.ko or ehci-hcd.ko
cdc-acm.ko
After that, the modem[s] should be accessible. You should be able to use
After that, the modem[s] should be accessible. You should be able to use
minicom, ppp and mgetty with them.
2. Verifying that it works
~~~~~~~~~~~~~~~~~~~~~~~~~~
The first step would be to check /sys/kernel/debug/usb/devices, it should look
like this:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=6800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
P: Vendor=04c1 ProdID=008f Rev= 2.07
S: Manufacturer=3Com Inc.
S: Product=3Com U.S. Robotics Pro ISDN TA
S: SerialNumber=UFT53A49BVT7
C: #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
C:* #Ifs= 2 Cfg#= 2 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
The first step would be to check /sys/kernel/debug/usb/devices, it should look
like this::
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=6800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
P: Vendor=04c1 ProdID=008f Rev= 2.07
S: Manufacturer=3Com Inc.
S: Product=3Com U.S. Robotics Pro ISDN TA
S: SerialNumber=UFT53A49BVT7
C: #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
C:* #Ifs= 2 Cfg#= 2 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
The presence of these three lines (and the Cls= 'comm' and 'data' classes)
is important, it means it's an ACM device. The Driver=acm means the acm
driver is used for the device. If you see only Cls=ff(vend.) then you're out
of luck, you have a device with vendor specific-interface.
of luck, you have a device with vendor specific-interface::
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
In the system log you should see:
In the system log you should see::
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF c7691fa0, numif 1
usb.c: kmalloc IF c7b5f3e0, numif 2
usb.c: skipped 4 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: 3Com Inc.
Product: 3Com U.S. Robotics Pro ISDN TA
SerialNumber: UFT53A49BVT7
acm.c: probing config 1
acm.c: probing config 2
ttyACM0: USB ACM device
acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0
acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7
usb.c: acm driver claimed interface c7b5f3e0
usb.c: acm driver claimed interface c7b5f3f8
usb.c: acm driver claimed interface c7691fa0
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF c7691fa0, numif 1
usb.c: kmalloc IF c7b5f3e0, numif 2
usb.c: skipped 4 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: 3Com Inc.
Product: 3Com U.S. Robotics Pro ISDN TA
SerialNumber: UFT53A49BVT7
acm.c: probing config 1
acm.c: probing config 2
ttyACM0: USB ACM device
acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0
acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7
usb.c: acm driver claimed interface c7b5f3e0
usb.c: acm driver claimed interface c7b5f3f8
usb.c: acm driver claimed interface c7691fa0
If all this seems to be OK, fire up minicom and set it to talk to the ttyACM
device and try typing 'at'. If it responds with 'OK', then everything is

75
Documentation/usb/authorization.txt
View File

@ -1,7 +1,8 @@
==============================================================
Authorizing (or not) your USB devices to connect to the system
==============================================================
(C) 2007 Inaky Perez-Gonzalez <inaky@linux.intel.com> Intel Corporation
Copyright (C) 2007 Inaky Perez-Gonzalez <inaky@linux.intel.com> Intel Corporation
This feature allows you to control if a USB device can be used (or
not) in a system. This feature will allow you to implement a lock-down
@ -12,24 +13,25 @@ its interfaces are immediately made available to the users. With this
modification, only if root authorizes the device to be configured will
then it be possible to use it.
Usage:
Usage
=====
Authorize a device to connect:
Authorize a device to connect::
$ echo 1 > /sys/bus/usb/devices/DEVICE/authorized
$ echo 1 > /sys/bus/usb/devices/DEVICE/authorized
Deauthorize a device:
De-authorize a device::
$ echo 0 > /sys/bus/usb/devices/DEVICE/authorized
$ echo 0 > /sys/bus/usb/devices/DEVICE/authorized
Set new devices connected to hostX to be deauthorized by default (ie:
lock down):
lock down)::
$ echo 0 > /sys/bus/usb/devices/usbX/authorized_default
$ echo 0 > /sys/bus/usb/devices/usbX/authorized_default
Remove the lock down:
Remove the lock down::
$ echo 1 > /sys/bus/usb/devices/usbX/authorized_default
$ echo 1 > /sys/bus/usb/devices/usbX/authorized_default
By default, Wired USB devices are authorized by default to
connect. Wireless USB hosts deauthorize by default all new connected
@ -40,21 +42,21 @@ USB ports.
Example system lockdown (lame)
-----------------------
------------------------------
Imagine you want to implement a lockdown so only devices of type XYZ
can be connected (for example, it is a kiosk machine with a visible
USB port):
USB port)::
boot up
rc.local ->
boot up
rc.local ->
for host in /sys/bus/usb/devices/usb*
do
echo 0 > $host/authorized_default
done
for host in /sys/bus/usb/devices/usb*
do
echo 0 > $host/authorized_default
done
Hookup an script to udev, for new USB devices
Hookup an script to udev, for new USB devices::
if device_is_my_type $DEV
then
@ -67,10 +69,10 @@ checking if the class, type and protocol match something is the worse
security verification you can make (or the best, for someone willing
to break it). If you need something secure, use crypto and Certificate
Authentication or stuff like that. Something simple for an storage key
could be:
could be::
function device_is_my_type()
{
function device_is_my_type()
{
echo 1 > authorized # temporarily authorize it
# FIXME: make sure none can mount it
mount DEVICENODE /mntpoint
@ -83,7 +85,7 @@ function device_is_my_type()
else
echo 0 > authorized
fi
}
}
Of course, this is lame, you'd want to do a real certificate
@ -95,30 +97,35 @@ welcome.
Interface authorization
-----------------------
There is a similar approach to allow or deny specific USB interfaces.
That allows to block only a subset of an USB device.
Authorize an interface:
$ echo 1 > /sys/bus/usb/devices/INTERFACE/authorized
Authorize an interface::
Deauthorize an interface:
$ echo 0 > /sys/bus/usb/devices/INTERFACE/authorized
$ echo 1 > /sys/bus/usb/devices/INTERFACE/authorized
Deauthorize an interface::
$ echo 0 > /sys/bus/usb/devices/INTERFACE/authorized
The default value for new interfaces
on a particular USB bus can be changed, too.
Allow interfaces per default:
$ echo 1 > /sys/bus/usb/devices/usbX/interface_authorized_default
Allow interfaces per default::
Deny interfaces per default:
$ echo 0 > /sys/bus/usb/devices/usbX/interface_authorized_default
$ echo 1 > /sys/bus/usb/devices/usbX/interface_authorized_default
Deny interfaces per default::
$ echo 0 > /sys/bus/usb/devices/usbX/interface_authorized_default
Per default the interface_authorized_default bit is 1.
So all interfaces would authorized per default.
Note:
If a deauthorized interface will be authorized so the driver probing must
be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe
If a deauthorized interface will be authorized so the driver probing must
be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe
For drivers that need multiple interfaces all needed interfaces should be
authorized first. After that the drivers should be probed.

101
Documentation/usb/chipidea.txt
View File

@ -1,22 +1,37 @@
==============================================
ChipIdea Highspeed Dual Role Controller Driver
==============================================
1. How to test OTG FSM(HNP and SRP)
-----------------------------------
To show how to demo OTG HNP and SRP functions via sys input files
with 2 Freescale i.MX6Q sabre SD boards.
1.1 How to enable OTG FSM
---------------------------------------
-------------------------
1.1.1 Select CONFIG_USB_OTG_FSM in menuconfig, rebuild kernel
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Image and modules. If you want to check some internal
variables for otg fsm, mount debugfs, there are 2 files
which can show otg fsm variables and some controller registers value:
cat /sys/kernel/debug/ci_hdrc.0/otg
cat /sys/kernel/debug/ci_hdrc.0/registers
which can show otg fsm variables and some controller registers value::
cat /sys/kernel/debug/ci_hdrc.0/otg
cat /sys/kernel/debug/ci_hdrc.0/registers
1.1.2 Add below entries in your dts file for your controller node
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
::
otg-rev = <0x0200>;
adp-disable;
1.2 Test operations
-------------------
1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded
(e.g. g_mass_storage).
@ -26,19 +41,24 @@ cat /sys/kernel/debug/ci_hdrc.0/registers
The A-device(with micro A plug inserted) should enumerate B-device.
3) Role switch
On B-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
On B-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
B-device should take host role and enumerate A-device.
4) A-device switch back to host.
On B-device:
echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
On B-device::
echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
or, by introducing HNP polling, B-Host can know when A-peripheral wish
to be host role, so this role switch also can be trigged in A-peripheral
side by answering the polling from B-Host, this can be done on A-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
side by answering the polling from B-Host, this can be done on A-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
A-device should switch back to host and enumerate B-device.
@ -49,23 +69,31 @@ cat /sys/kernel/debug/ci_hdrc.0/registers
A-device should NOT enumerate B-device.
if A-device wants to use bus:
On A-device:
echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
On A-device::
echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
if B-device wants to use bus:
On B-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
On B-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
7) A-device power down the bus.
On A-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
On A-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
A-device should disconnect with B-device and power down the bus.
8) B-device does data pulse for SRP.
On B-device:
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
On B-device::
echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
A-device should resume usb bus and enumerate B-device.
@ -75,22 +103,31 @@ cat /sys/kernel/debug/ci_hdrc.0/registers
July 27, 2012 Revision 2.0 version 1.1a"
2. How to enable USB as system wakeup source
-----------------------------------
--------------------------------------------
Below is the example for how to enable USB as system wakeup source
at imx6 platform.
2.1 Enable core's wakeup
echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup
2.2 Enable glue layer's wakeup
echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup
2.3 Enable PHY's wakeup (optional)
echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup
2.4 Enable roothub's wakeup
echo enabled > /sys/bus/usb/devices/usb1/power/wakeup
2.5 Enable related device's wakeup
echo enabled > /sys/bus/usb/devices/1-1/power/wakeup
2.1 Enable core's wakeup::
echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup
2.2 Enable glue layer's wakeup::
echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup
2.3 Enable PHY's wakeup (optional)::
echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup
2.4 Enable roothub's wakeup::
echo enabled > /sys/bus/usb/devices/usb1/power/wakeup
2.5 Enable related device's wakeup::
echo enabled > /sys/bus/usb/devices/1-1/power/wakeup
If the system has only one usb port, and you want usb wakeup at this port, you
can use below script to enable usb wakeup.
for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done;
can use below script to enable usb wakeup::
for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done;

12
Documentation/usb/dwc3.txt
View File

@ -1,6 +1,11 @@
===========
DWC3 driver
===========
TODO
~~~~
TODO
~~~~~~
Please pick something while reading :)
- Convert interrupt handler to per-ep-thread-irq
@ -9,6 +14,7 @@ Please pick something while reading :)
until the command completes which is bad.
Implementation idea:
- dwc core implements a demultiplexing irq chip for interrupts per
endpoint. The interrupt numbers are allocated during probe and belong
to the device. If MSI provides per-endpoint interrupt this dummy
@ -19,6 +25,7 @@ Please pick something while reading :)
- dwc3_send_gadget_ep_cmd() will sleep in wait_for_completion_timeout()
until the command completes.
- the interrupt handler is split into the following pieces:
- primary handler of the device
goes through every event and calls generic_handle_irq() for event
it. On return from generic_handle_irq() in acknowledges the event
@ -40,6 +47,7 @@ Please pick something while reading :)
for command completion.
Latency:
There should be no increase in latency since the interrupt-thread has a
high priority and will be run before an average task in user land
(except the user changed priorities).

42
Documentation/usb/ehci.txt
View File

@ -1,3 +1,7 @@
===========
EHCI driver
===========
27-Dec-2002
The EHCI driver is used to talk to high speed USB 2.0 devices using
@ -40,7 +44,8 @@ APIs exposed to USB device drivers.
<dbrownell@users.sourceforge.net>
FUNCTIONALITY
Functionality
=============
This driver is regularly tested on x86 hardware, and has also been
used on PPC hardware so big/little endianness issues should be gone.
@ -48,6 +53,7 @@ It's believed to do all the right PCI magic so that I/O works even on
systems with interesting DMA mapping issues.
Transfer Types
--------------
At this writing the driver should comfortably handle all control, bulk,
and interrupt transfers, including requests to USB 1.1 devices through
@ -63,6 +69,7 @@ since EHCI represents these with a different data structure. So for now,
most USB audio and video devices can't be connected to high speed buses.
Driver Behavior
---------------
Transfers of all types can be queued. This means that control transfers
from a driver on one interface (or through usbfs) won't interfere with
@ -83,14 +90,15 @@ limits on the number of periodic transactions that can be scheduled,
and prevent use of polling intervals of less than one frame.
USE BY
Use by
======
Assuming you have an EHCI controller (on a PCI card or motherboard)
and have compiled this driver as a module, load this like:
and have compiled this driver as a module, load this like::
# modprobe ehci-hcd
and remove it by:
and remove it by::
# rmmod ehci-hcd
@ -112,13 +120,16 @@ If you're using this driver on a 2.5 kernel, and you've enabled USB
debugging support, you'll see three files in the "sysfs" directory for
any EHCI controller:
"async" dumps the asynchronous schedule, used for control
"async"
dumps the asynchronous schedule, used for control
and bulk transfers. Shows each active qh and the qtds
pending, usually one qtd per urb. (Look at it with
usb-storage doing disk I/O; watch the request queues!)
"periodic" dumps the periodic schedule, used for interrupt
"periodic"
dumps the periodic schedule, used for interrupt
and isochronous transfers. Doesn't show qtds.
"registers" show controller register state, and
"registers"
show controller register state, and
The contents of those files can help identify driver problems.
@ -136,7 +147,8 @@ transaction translators are in use; some drivers have been seen to behave
badly when they see different faults than OHCI or UHCI report.
PERFORMANCE
Performance
===========
USB 2.0 throughput is gated by two main factors: how fast the host
controller can process requests, and how fast devices can respond to
@ -156,6 +168,7 @@ hardware and device driver software allow it. Periodic transfer modes
approach the quoted 480 MBit/sec transfer rate.
Hardware Performance
--------------------
At this writing, individual USB 2.0 devices tend to max out at around
20 MByte/sec transfer rates. This is of course subject to change;
@ -183,6 +196,7 @@ you issue a control or bulk request you can often expect to learn that
it completed in less than 250 usec (depending on transfer size).
Software Performance
--------------------
To get even 20 MByte/sec transfer rates, Linux-USB device drivers will
need to keep the EHCI queue full. That means issuing large requests,
@ -206,9 +220,11 @@ mapping (which might apply an IOMMU) and IRQ reduction, all of which will
help make high speed transfers run as fast as they can.
TBD: Interrupt and ISO transfer performance issues. Those periodic
transfers are fully scheduled, so the main issue is likely to be how
to trigger "high bandwidth" modes.
TBD:
Interrupt and ISO transfer performance issues. Those periodic
transfers are fully scheduled, so the main issue is likely to be how
to trigger "high bandwidth" modes.
TBD: More than standard 80% periodic bandwidth allocation is possible
through sysfs uframe_periodic_max parameter. Describe that.
TBD:
More than standard 80% periodic bandwidth allocation is possible
through sysfs uframe_periodic_max parameter. Describe that.

17
Documentation/usb/functionfs.txt
View File

@ -1,4 +1,6 @@
*How FunctionFS works*
====================
How FunctionFS works
====================
From kernel point of view it is just a composite function with some
unique behaviour. It may be added to an USB configuration only after
@ -38,13 +40,13 @@ when mounting.
One can imagine a gadget that has an Ethernet, MTP and HID interfaces
where the last two are implemented via FunctionFS. On user space
level it would look like this:
level it would look like this::
$ insmod g_ffs.ko idVendor=<ID> iSerialNumber=<string> functions=mtp,hid
$ mkdir /dev/ffs-mtp && mount -t functionfs mtp /dev/ffs-mtp
$ ( cd /dev/ffs-mtp && mtp-daemon ) &
$ mkdir /dev/ffs-hid && mount -t functionfs hid /dev/ffs-hid
$ ( cd /dev/ffs-hid && hid-daemon ) &
$ insmod g_ffs.ko idVendor=<ID> iSerialNumber=<string> functions=mtp,hid
$ mkdir /dev/ffs-mtp && mount -t functionfs mtp /dev/ffs-mtp
$ ( cd /dev/ffs-mtp && mtp-daemon ) &
$ mkdir /dev/ffs-hid && mount -t functionfs hid /dev/ffs-hid
$ ( cd /dev/ffs-hid && hid-daemon ) &
On kernel level the gadget checks ffs_data->dev_name to identify
whether it's FunctionFS designed for MTP ("mtp") or HID ("hid").
@ -64,4 +66,3 @@ have been written to their ep0's.
Conversely, the gadget is unregistered after the first USB function
closes its endpoints.

609
Documentation/usb/gadget-testing.txt
View File

@ -1,26 +1,32 @@
==============
Gadget Testing
==============
This file summarizes information on basic testing of USB functions
provided by gadgets.
1. ACM function
2. ECM function
3. ECM subset function
4. EEM function
5. FFS function
6. HID function
7. LOOPBACK function
8. MASS STORAGE function
9. MIDI function
10. NCM function
11. OBEX function
12. PHONET function
13. RNDIS function
14. SERIAL function
15. SOURCESINK function
16. UAC1 function (legacy implementation)
17. UAC2 function
18. UVC function
19. PRINTER function
20. UAC1 function (new API)
.. contents
1. ACM function
2. ECM function
3. ECM subset function
4. EEM function
5. FFS function
6. HID function
7. LOOPBACK function
8. MASS STORAGE function
9. MIDI function
10. NCM function
11. OBEX function
12. PHONET function
13. RNDIS function
14. SERIAL function
15. SOURCESINK function
16. UAC1 function (legacy implementation)
17. UAC2 function
18. UVC function
19. PRINTER function
20. UAC1 function (new API)
1. ACM function
@ -44,13 +50,23 @@ There can be at most 4 ACM/generic serial/OBEX ports in the system.
Testing the ACM function
------------------------
On the host: cat > /dev/ttyACM<X>
On the device : cat /dev/ttyGS<Y>
On the host::
cat > /dev/ttyACM<X>
On the device::
cat /dev/ttyGS<Y>
then the other way round
On the device: cat > /dev/ttyGS<Y>
On the host: cat /dev/ttyACM<X>
On the device::
cat > /dev/ttyGS<Y>
On the host::
cat /dev/ttyACM<X>
2. ECM function
===============
@ -63,13 +79,15 @@ Function-specific configfs interface
The function name to use when creating the function directory is "ecm".
The ECM function provides these attributes in its function directory:
ifname - network device interface name associated with this
=============== ==================================================
ifname network device interface name associated with this
function instance
qmult - queue length multiplier for high and super speed
host_addr - MAC address of host's end of this
qmult queue length multiplier for high and super speed
host_addr MAC address of host's end of this
Ethernet over USB link
dev_addr - MAC address of device's end of this
dev_addr MAC address of device's end of this
Ethernet over USB link
=============== ==================================================
and after creating the functions/ecm.<instance name> they contain default
values: qmult is 5, dev_addr and host_addr are randomly selected.
@ -82,8 +100,13 @@ Testing the ECM function
Configure IP addresses of the device and the host. Then:
On the device: ping <host's IP>
On the host: ping <device's IP>
On the device::
ping <host's IP>
On the host::
ping <device's IP>
3. ECM subset function
======================
@ -96,13 +119,15 @@ Function-specific configfs interface
The function name to use when creating the function directory is "geth".
The ECM subset function provides these attributes in its function directory:
ifname - network device interface name associated with this
=============== ==================================================
ifname network device interface name associated with this
function instance
qmult - queue length multiplier for high and super speed
host_addr - MAC address of host's end of this
qmult queue length multiplier for high and super speed
host_addr MAC address of host's end of this
Ethernet over USB link
dev_addr - MAC address of device's end of this
dev_addr MAC address of device's end of this
Ethernet over USB link
=============== ==================================================
and after creating the functions/ecm.<instance name> they contain default
values: qmult is 5, dev_addr and host_addr are randomly selected.
@ -115,8 +140,13 @@ Testing the ECM subset function
Configure IP addresses of the device and the host. Then:
On the device: ping <host's IP>
On the host: ping <device's IP>
On the device::
ping <host's IP>
On the host::
ping <device's IP>
4. EEM function
===============
@ -129,13 +159,15 @@ Function-specific configfs interface
The function name to use when creating the function directory is "eem".
The EEM function provides these attributes in its function directory:
ifname - network device interface name associated with this
=============== ==================================================
ifname network device interface name associated with this
function instance
qmult - queue length multiplier for high and super speed
host_addr - MAC address of host's end of this
qmult queue length multiplier for high and super speed
host_addr MAC address of host's end of this
Ethernet over USB link
dev_addr - MAC address of device's end of this
dev_addr MAC address of device's end of this
Ethernet over USB link
=============== ==================================================
and after creating the functions/eem.<instance name> they contain default
values: qmult is 5, dev_addr and host_addr are randomly selected.
@ -148,8 +180,13 @@ Testing the EEM function
Configure IP addresses of the device and the host. Then:
On the device: ping <host's IP>
On the host: ping <device's IP>
On the device::
ping <host's IP>
On the host::
ping <device's IP>
5. FFS function
===============
@ -172,6 +209,7 @@ Testing the FFS function
------------------------
On the device: start the function's userspace daemon, enable the gadget
On the host: use the USB function provided by the device
6. HID function
@ -185,39 +223,43 @@ Function-specific configfs interface
The function name to use when creating the function directory is "hid".
The HID function provides these attributes in its function directory:
protocol - HID protocol to use
report_desc - data to be used in HID reports, except data
=============== ===========================================
protocol HID protocol to use
report_desc data to be used in HID reports, except data
passed with /dev/hidg<X>
report_length - HID report length
subclass - HID subclass to use
report_length HID report length
subclass HID subclass to use
=============== ===========================================
For a keyboard the protocol and the subclass are 1, the report_length is 8,
while the report_desc is:
while the report_desc is::
$ hd my_report_desc
00000000 05 01 09 06 a1 01 05 07 19 e0 29 e7 15 00 25 01 |..........)...%.|
00000010 75 01 95 08 81 02 95 01 75 08 81 03 95 05 75 01 |u.......u.....u.|
00000020 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 06 |....).....u.....|
00000030 75 08 15 00 25 65 05 07 19 00 29 65 81 00 c0 |u...%e....)e...|
0000003f
$ hd my_report_desc
00000000 05 01 09 06 a1 01 05 07 19 e0 29 e7 15 00 25 01 |..........)...%.|
00000010 75 01 95 08 81 02 95 01 75 08 81 03 95 05 75 01 |u.......u.....u.|
00000020 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 06 |....).....u.....|
00000030 75 08 15 00 25 65 05 07 19 00 29 65 81 00 c0 |u...%e....)e...|
0000003f
Such a sequence of bytes can be stored to the attribute with echo:
Such a sequence of bytes can be stored to the attribute with echo::
$ echo -ne \\x05\\x01\\x09\\x06\\xa1.....
$ echo -ne \\x05\\x01\\x09\\x06\\xa1.....
Testing the HID function
------------------------
Device:
- create the gadget
- connect the gadget to a host, preferably not the one used
to control the gadget
to control the gadget
- run a program which writes to /dev/hidg<N>, e.g.
a userspace program found in Documentation/usb/gadget_hid.txt:
a userspace program found in Documentation/usb/gadget_hid.txt::
$ ./hid_gadget_test /dev/hidg0 keyboard
$ ./hid_gadget_test /dev/hidg0 keyboard
Host:
- observe the keystrokes from the gadget
7. LOOPBACK function
@ -231,13 +273,16 @@ Function-specific configfs interface
The function name to use when creating the function directory is "Loopback".
The LOOPBACK function provides these attributes in its function directory:
qlen - depth of loopback queue
bulk_buflen - buffer length
=============== =======================
qlen depth of loopback queue
bulk_buflen buffer length
=============== =======================
Testing the LOOPBACK function
-----------------------------
device: run the gadget
host: test-usb (tools/usb/testusb.c)
8. MASS STORAGE function
@ -252,18 +297,20 @@ The function name to use when creating the function directory is "mass_storage".
The MASS STORAGE function provides these attributes in its directory:
files:
stall - Set to permit function to halt bulk endpoints.
=============== ==============================================
stall Set to permit function to halt bulk endpoints.
Disabled on some USB devices known not to work
correctly. You should set it to true.
num_buffers - Number of pipeline buffers. Valid numbers
num_buffers Number of pipeline buffers. Valid numbers
are 2..4. Available only if
CONFIG_USB_GADGET_DEBUG_FILES is set.
=============== ==============================================
and a default lun.0 directory corresponding to SCSI LUN #0.
A new lun can be added with mkdir:
A new lun can be added with mkdir::
$ mkdir functions/mass_storage.0/partition.5
$ mkdir functions/mass_storage.0/partition.5
Lun numbering does not have to be continuous, except for lun #0 which is
created by default. A maximum of 8 luns can be specified and they all must be
@ -273,18 +320,20 @@ although it is not mandatory.
In each lun directory there are the following attribute files:
file - The path to the backing file for the LUN.
=============== ==============================================
file The path to the backing file for the LUN.
Required if LUN is not marked as removable.
ro - Flag specifying access to the LUN shall be
ro Flag specifying access to the LUN shall be
read-only. This is implied if CD-ROM emulation
is enabled as well as when it was impossible
to open "filename" in R/W mode.
removable - Flag specifying that LUN shall be indicated as
removable Flag specifying that LUN shall be indicated as
being removable.
cdrom - Flag specifying that LUN shall be reported as
cdrom Flag specifying that LUN shall be reported as
being a CD-ROM.
nofua - Flag specifying that FUA flag
nofua Flag specifying that FUA flag
in SCSI WRITE(10,12)
=============== ==============================================
Testing the MASS STORAGE function
---------------------------------
@ -304,12 +353,14 @@ Function-specific configfs interface
The function name to use when creating the function directory is "midi".
The MIDI function provides these attributes in its function directory:
buflen - MIDI buffer length
id - ID string for the USB MIDI adapter
in_ports - number of MIDI input ports
index - index value for the USB MIDI adapter
out_ports - number of MIDI output ports
qlen - USB read request queue length
=============== ====================================
buflen MIDI buffer length
id ID string for the USB MIDI adapter
in_ports number of MIDI input ports
index index value for the USB MIDI adapter
out_ports number of MIDI output ports
qlen USB read request queue length
=============== ====================================
Testing the MIDI function
-------------------------
@ -317,60 +368,63 @@ Testing the MIDI function
There are two cases: playing a mid from the gadget to
the host and playing a mid from the host to the gadget.
1) Playing a mid from the gadget to the host
host)
1) Playing a mid from the gadget to the host:
$ arecordmidi -l
Port Client name Port name
14:0 Midi Through Midi Through Port-0
24:0 MIDI Gadget MIDI Gadget MIDI 1
$ arecordmidi -p 24:0 from_gadget.mid
host::
gadget)
$ arecordmidi -l
Port Client name Port name
14:0 Midi Through Midi Through Port-0
24:0 MIDI Gadget MIDI Gadget MIDI 1
$ arecordmidi -p 24:0 from_gadget.mid
$ aplaymidi -l
Port Client name Port name
20:0 f_midi f_midi
gadget::
$ aplaymidi -p 20:0 to_host.mid
$ aplaymidi -l
Port Client name Port name
20:0 f_midi f_midi
$ aplaymidi -p 20:0 to_host.mid
2) Playing a mid from the host to the gadget
gadget)
$ arecordmidi -l
Port Client name Port name
20:0 f_midi f_midi
gadget::
$ arecordmidi -p 20:0 from_host.mid
$ arecordmidi -l
Port Client name Port name
20:0 f_midi f_midi
host)
$ arecordmidi -p 20:0 from_host.mid
$ aplaymidi -l
Port Client name Port name
14:0 Midi Through Midi Through Port-0
24:0 MIDI Gadget MIDI Gadget MIDI 1
host::
$ aplaymidi -p24:0 to_gadget.mid
$ aplaymidi -l
Port Client name Port name
14:0 Midi Through Midi Through Port-0
24:0 MIDI Gadget MIDI Gadget MIDI 1
$ aplaymidi -p24:0 to_gadget.mid
The from_gadget.mid should sound identical to the to_host.mid.
The from_host.id should sound identical to the to_gadget.mid.
MIDI files can be played to speakers/headphones with e.g. timidity installed
MIDI files can be played to speakers/headphones with e.g. timidity installed::
$ aplaymidi -l
Port Client name Port name
14:0 Midi Through Midi Through Port-0
24:0 MIDI Gadget MIDI Gadget MIDI 1
128:0 TiMidity TiMidity port 0
128:1 TiMidity TiMidity port 1
128:2 TiMidity TiMidity port 2
128:3 TiMidity TiMidity port 3
$ aplaymidi -l
Port Client name Port name
14:0 Midi Through Midi Through Port-0
24:0 MIDI Gadget MIDI Gadget MIDI 1
128:0 TiMidity TiMidity port 0
128:1 TiMidity TiMidity port 1
128:2 TiMidity TiMidity port 2
128:3 TiMidity TiMidity port 3
$ aplaymidi -p 128:0 file.mid
$ aplaymidi -p 128:0 file.mid
MIDI ports can be logically connected using the aconnect utility, e.g.:
MIDI ports can be logically connected using the aconnect utility, e.g.::
$ aconnect 24:0 128:0 # try it on the host
$ aconnect 24:0 128:0 # try it on the host
After the gadget's MIDI port is connected to timidity's MIDI port,
whatever is played at the gadget side with aplaymidi -l is audible
@ -387,13 +441,15 @@ Function-specific configfs interface
The function name to use when creating the function directory is "ncm".
The NCM function provides these attributes in its function directory:
ifname - network device interface name associated with this
=============== ==================================================
ifname network device interface name associated with this
function instance
qmult - queue length multiplier for high and super speed
host_addr - MAC address of host's end of this
qmult queue length multiplier for high and super speed
host_addr MAC address of host's end of this
Ethernet over USB link
dev_addr - MAC address of device's end of this
dev_addr MAC address of device's end of this
Ethernet over USB link
=============== ==================================================
and after creating the functions/ncm.<instance name> they contain default
values: qmult is 5, dev_addr and host_addr are randomly selected.
@ -406,8 +462,13 @@ Testing the NCM function
Configure IP addresses of the device and the host. Then:
On the device: ping <host's IP>
On the host: ping <device's IP>
On the device::
ping <host's IP>
On the host::
ping <device's IP>
11. OBEX function
=================
@ -429,13 +490,18 @@ There can be at most 4 ACM/generic serial/OBEX ports in the system.
Testing the OBEX function
-------------------------
On device: seriald -f /dev/ttyGS<Y> -s 1024
On host: serialc -v <vendorID> -p <productID> -i<interface#> -a1 -s1024 \
-t<out endpoint addr> -r<in endpoint addr>
On device::
seriald -f /dev/ttyGS<Y> -s 1024
On host::
serialc -v <vendorID> -p <productID> -i<interface#> -a1 -s1024 \
-t<out endpoint addr> -r<in endpoint addr>
where seriald and serialc are Felipe's utilities found here:
https://github.com/felipebalbi/usb-tools.git master
https://github.com/felipebalbi/usb-tools.git master
12. PHONET function
===================
@ -448,8 +514,10 @@ Function-specific configfs interface
The function name to use when creating the function directory is "phonet".
The PHONET function provides just one attribute in its function directory:
ifname - network device interface name associated with this
=============== ==================================================
ifname network device interface name associated with this
function instance
=============== ==================================================
Testing the PHONET function
---------------------------
@ -464,41 +532,41 @@ These tools are required:
git://git.gitorious.org/meego-cellular/phonet-utils.git
On the host:
On the host::
$ ./phonet -a 0x10 -i usbpn0
$ ./pnroute add 0x6c usbpn0
$./pnroute add 0x10 usbpn0
$ ifconfig usbpn0 up
$ ./phonet -a 0x10 -i usbpn0
$ ./pnroute add 0x6c usbpn0
$./pnroute add 0x10 usbpn0
$ ifconfig usbpn0 up
On the device:
On the device::
$ ./phonet -a 0x6c -i upnlink0
$ ./pnroute add 0x10 upnlink0
$ ifconfig upnlink0 up
$ ./phonet -a 0x6c -i upnlink0
$ ./pnroute add 0x10 upnlink0
$ ifconfig upnlink0 up
Then a test program can be used:
Then a test program can be used::
http://www.spinics.net/lists/linux-usb/msg85690.html
http://www.spinics.net/lists/linux-usb/msg85690.html
On the device:
On the device::
$ ./pnxmit -a 0x6c -r
$ ./pnxmit -a 0x6c -r
On the host:
On the host::
$ ./pnxmit -a 0x10 -s 0x6c
$ ./pnxmit -a 0x10 -s 0x6c
As a result some data should be sent from host to device.
Then the other way round:
On the host:
On the host::
$ ./pnxmit -a 0x10 -r
$ ./pnxmit -a 0x10 -r
On the device:
On the device::
$ ./pnxmit -a 0x6c -s 0x10
$ ./pnxmit -a 0x6c -s 0x10
13. RNDIS function
==================
@ -511,13 +579,15 @@ Function-specific configfs interface
The function name to use when creating the function directory is "rndis".
The RNDIS function provides these attributes in its function directory:
ifname - network device interface name associated with this
=============== ==================================================
ifname network device interface name associated with this
function instance
qmult - queue length multiplier for high and super speed
host_addr - MAC address of host's end of this
qmult queue length multiplier for high and super speed
host_addr MAC address of host's end of this
Ethernet over USB link
dev_addr - MAC address of device's end of this
dev_addr MAC address of device's end of this
Ethernet over USB link
=============== ==================================================
and after creating the functions/rndis.<instance name> they contain default
values: qmult is 5, dev_addr and host_addr are randomly selected.
@ -530,8 +600,13 @@ Testing the RNDIS function
Configure IP addresses of the device and the host. Then:
On the device: ping <host's IP>
On the host: ping <device's IP>
On the device::
ping <host's IP>
On the host::
ping <device's IP>
14. SERIAL function
===================
@ -553,15 +628,28 @@ There can be at most 4 ACM/generic serial/OBEX ports in the system.
Testing the SERIAL function
---------------------------
On host: insmod usbserial
echo VID PID >/sys/bus/usb-serial/drivers/generic/new_id
On host: cat > /dev/ttyUSB<X>
On target: cat /dev/ttyGS<Y>
On host::
insmod usbserial
echo VID PID >/sys/bus/usb-serial/drivers/generic/new_id
On host::
cat > /dev/ttyUSB<X>
On target::
cat /dev/ttyGS<Y>
then the other way round
On target: cat > /dev/ttyGS<Y>
On host: cat /dev/ttyUSB<X>
On target::
cat > /dev/ttyGS<Y>
On host::
cat /dev/ttyUSB<X>
15. SOURCESINK function
=======================
@ -574,24 +662,27 @@ Function-specific configfs interface
The function name to use when creating the function directory is "SourceSink".
The SOURCESINK function provides these attributes in its function directory:
pattern - 0 (all zeros), 1 (mod63), 2 (none)
isoc_interval - 1..16
isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss)
isoc_mult - 0..2 (hs/ss only)
isoc_maxburst - 0..15 (ss only)
bulk_buflen - buffer length
bulk_qlen - depth of queue for bulk
iso_qlen - depth of queue for iso
=============== ==================================
pattern 0 (all zeros), 1 (mod63), 2 (none)
isoc_interval 1..16
isoc_maxpacket 0 - 1023 (fs), 0 - 1024 (hs/ss)
isoc_mult 0..2 (hs/ss only)
isoc_maxburst 0..15 (ss only)
bulk_buflen buffer length
bulk_qlen depth of queue for bulk
iso_qlen depth of queue for iso
=============== ==================================
Testing the SOURCESINK function
-------------------------------
device: run the gadget
host: test-usb (tools/usb/testusb.c)
16. UAC1 function (legacy implementation)
=================
=========================================
The function is provided by usb_f_uac1_legacy.ko module.
@ -602,12 +693,14 @@ The function name to use when creating the function directory
is "uac1_legacy".
The uac1 function provides these attributes in its function directory:
audio_buf_size - audio buffer size
fn_cap - capture pcm device file name
fn_cntl - control device file name
fn_play - playback pcm device file name
req_buf_size - ISO OUT endpoint request buffer size
req_count - ISO OUT endpoint request count
=============== ====================================
audio_buf_size audio buffer size
fn_cap capture pcm device file name
fn_cntl control device file name
fn_play playback pcm device file name
req_buf_size ISO OUT endpoint request buffer size
req_count ISO OUT endpoint request count
=============== ====================================
The attributes have sane default values.
@ -615,7 +708,10 @@ Testing the UAC1 function
-------------------------
device: run the gadget
host: aplay -l # should list our USB Audio Gadget
host::
aplay -l # should list our USB Audio Gadget
17. UAC2 function
=================
@ -628,14 +724,16 @@ Function-specific configfs interface
The function name to use when creating the function directory is "uac2".
The uac2 function provides these attributes in its function directory:
c_chmask - capture channel mask
c_srate - capture sampling rate
c_ssize - capture sample size (bytes)
p_chmask - playback channel mask
p_srate - playback sampling rate
p_ssize - playback sample size (bytes)
req_number - the number of pre-allocated request for both capture
and playback
=============== ====================================================
c_chmask capture channel mask
c_srate capture sampling rate
c_ssize capture sample size (bytes)
p_chmask playback channel mask
p_srate playback sampling rate
p_ssize playback sample size (bytes)
req_number the number of pre-allocated request for both capture
and playback
=============== ====================================================
The attributes have sane default values.
@ -648,14 +746,14 @@ host: aplay -l # should list our USB Audio Gadget
This function does not require real hardware support, it just
sends a stream of audio data to/from the host. In order to
actually hear something at the device side, a command similar
to this must be used at the device side:
to this must be used at the device side::
$ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 &
$ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 &
e.g.:
e.g.::
$ arecord -f dat -t wav -D hw:CARD=UAC2Gadget,DEV=0 | \
aplay -D default:CARD=OdroidU3
$ arecord -f dat -t wav -D hw:CARD=UAC2Gadget,DEV=0 | \
aplay -D default:CARD=OdroidU3
18. UVC function
================
@ -668,66 +766,73 @@ Function-specific configfs interface
The function name to use when creating the function directory is "uvc".
The uvc function provides these attributes in its function directory:
streaming_interval - interval for polling endpoint for data transfers
streaming_maxburst - bMaxBurst for super speed companion descriptor
streaming_maxpacket - maximum packet size this endpoint is capable of
sending or receiving when this configuration is
selected
=================== ================================================
streaming_interval interval for polling endpoint for data transfers
streaming_maxburst bMaxBurst for super speed companion descriptor
streaming_maxpacket maximum packet size this endpoint is capable of
sending or receiving when this configuration is
selected
=================== ================================================
There are also "control" and "streaming" subdirectories, each of which contain
a number of their subdirectories. There are some sane defaults provided, but
the user must provide the following:
control header - create in control/header, link from control/class/fs
and/or control/class/ss
streaming header - create in streaming/header, link from
streaming/class/fs and/or streaming/class/hs and/or
streaming/class/ss
format description - create in streaming/mjpeg and/or
streaming/uncompressed
frame description - create in streaming/mjpeg/<format> and/or in
streaming/uncompressed/<format>
================== ====================================================
control header create in control/header, link from control/class/fs
and/or control/class/ss
streaming header create in streaming/header, link from
streaming/class/fs and/or streaming/class/hs and/or
streaming/class/ss
format description create in streaming/mjpeg and/or
streaming/uncompressed
frame description create in streaming/mjpeg/<format> and/or in
streaming/uncompressed/<format>
================== ====================================================
Each frame description contains frame interval specification, and each
such specification consists of a number of lines with an inverval value
in each line. The rules stated above are best illustrated with an example:
in each line. The rules stated above are best illustrated with an example::
# mkdir functions/uvc.usb0/control/header/h
# cd functions/uvc.usb0/control/
# ln -s header/h class/fs
# ln -s header/h class/ss
# mkdir -p functions/uvc.usb0/streaming/uncompressed/u/360p
# cat <<EOF > functions/uvc.usb0/streaming/uncompressed/u/360p/dwFrameInterval
666666
1000000
5000000
EOF
# cd $GADGET_CONFIGFS_ROOT
# mkdir functions/uvc.usb0/streaming/header/h
# cd functions/uvc.usb0/streaming/header/h
# ln -s ../../uncompressed/u
# cd ../../class/fs
# ln -s ../../header/h
# cd ../../class/hs
# ln -s ../../header/h
# cd ../../class/ss
# ln -s ../../header/h
# mkdir functions/uvc.usb0/control/header/h
# cd functions/uvc.usb0/control/
# ln -s header/h class/fs
# ln -s header/h class/ss
# mkdir -p functions/uvc.usb0/streaming/uncompressed/u/360p
# cat <<EOF > functions/uvc.usb0/streaming/uncompressed/u/360p/dwFrameInterval
666666
1000000
5000000
EOF
# cd $GADGET_CONFIGFS_ROOT
# mkdir functions/uvc.usb0/streaming/header/h
# cd functions/uvc.usb0/streaming/header/h
# ln -s ../../uncompressed/u
# cd ../../class/fs
# ln -s ../../header/h
# cd ../../class/hs
# ln -s ../../header/h
# cd ../../class/ss
# ln -s ../../header/h
Testing the UVC function
------------------------
device: run the gadget, modprobe vivid
device: run the gadget, modprobe vivid::
# uvc-gadget -u /dev/video<uvc video node #> -v /dev/video<vivid video node #>
# uvc-gadget -u /dev/video<uvc video node #> -v /dev/video<vivid video node #>
where uvc-gadget is this program:
http://git.ideasonboard.org/uvc-gadget.git
http://git.ideasonboard.org/uvc-gadget.git
with these patches:
http://www.spinics.net/lists/linux-usb/msg99220.html
host: luvcview -f yuv
http://www.spinics.net/lists/linux-usb/msg99220.html
host::
luvcview -f yuv
19. PRINTER function
====================
@ -740,16 +845,19 @@ Function-specific configfs interface
The function name to use when creating the function directory is "printer".
The printer function provides these attributes in its function directory:
pnp_string - Data to be passed to the host in pnp string
q_len - Number of requests per endpoint
========== ===========================================
pnp_string Data to be passed to the host in pnp string
q_len Number of requests per endpoint
========== ===========================================
Testing the PRINTER function
----------------------------
The most basic testing:
device: run the gadget
# ls -l /devices/virtual/usb_printer_gadget/
device: run the gadget::
# ls -l /devices/virtual/usb_printer_gadget/
should show g_printer<number>.
@ -761,23 +869,28 @@ If udev is active, then e.g. /dev/usb/lp0 should appear.
host->device transmission:
device:
# cat /dev/g_printer<number>
host:
# cat > /dev/usb/lp0
device::
device->host transmission:
# cat /dev/g_printer<number>
# cat > /dev/g_printer<number>
host:
# cat /dev/usb/lp0
host::
# cat > /dev/usb/lp0
device->host transmission::
# cat > /dev/g_printer<number>
host::
# cat /dev/usb/lp0
More advanced testing can be done with the prn_example
described in Documentation/usb/gadget_printer.txt.
20. UAC1 function (virtual ALSA card, using u_audio API)
=================
========================================================
The function is provided by usb_f_uac1.ko module.
It will create a virtual ALSA card and the audio streams are simply
@ -789,14 +902,16 @@ Function-specific configfs interface
The function name to use when creating the function directory is "uac1".
The uac1 function provides these attributes in its function directory:
c_chmask - capture channel mask
c_srate - capture sampling rate
c_ssize - capture sample size (bytes)
p_chmask - playback channel mask
p_srate - playback sampling rate
p_ssize - playback sample size (bytes)
req_number - the number of pre-allocated request for both capture
and playback
========== ====================================================
c_chmask capture channel mask
c_srate capture sampling rate
c_ssize capture sample size (bytes)
p_chmask playback channel mask
p_srate playback sampling rate
p_ssize playback sample size (bytes)
req_number the number of pre-allocated request for both capture
and playback
========== ====================================================
The attributes have sane default values.
@ -809,11 +924,11 @@ host: aplay -l # should list our USB Audio Gadget
This function does not require real hardware support, it just
sends a stream of audio data to/from the host. In order to
actually hear something at the device side, a command similar
to this must be used at the device side:
to this must be used at the device side::
$ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 &
$ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 &
e.g.:
e.g.::
$ arecord -f dat -t wav -D hw:CARD=UAC1Gadget,DEV=0 | \
aplay -D default:CARD=OdroidU3
$ arecord -f dat -t wav -D hw:CARD=UAC1Gadget,DEV=0 | \
aplay -D default:CARD=OdroidU3

302
Documentation/usb/gadget_configfs.txt
View File

@ -1,11 +1,9 @@
============================================
Linux USB gadget configured through configfs
============================================
Linux USB gadget configured through configfs
25th April 2013
25th April 2013
@ -26,7 +24,7 @@ Linux provides a number of functions for gadgets to use.
Creating a gadget means deciding what configurations there will be
and which functions each configuration will provide.
Configfs (please see Documentation/filesystems/configfs/*) lends itself nicely
Configfs (please see `Documentation/filesystems/configfs/*`) lends itself nicely
for the purpose of telling the kernel about the above mentioned decision.
This document is about how to do it.
@ -51,44 +49,46 @@ Usage
made available through configfs can be seen here:
http://www.spinics.net/lists/linux-usb/msg76388.html)
$ modprobe libcomposite
$ mount none $CONFIGFS_HOME -t configfs
::
$ modprobe libcomposite
$ mount none $CONFIGFS_HOME -t configfs
where CONFIGFS_HOME is the mount point for configfs
1. Creating the gadgets
-----------------------
For each gadget to be created its corresponding directory must be created:
For each gadget to be created its corresponding directory must be created::
$ mkdir $CONFIGFS_HOME/usb_gadget/<gadget name>
$ mkdir $CONFIGFS_HOME/usb_gadget/<gadget name>
e.g.:
e.g.::
$ mkdir $CONFIGFS_HOME/usb_gadget/g1
$ mkdir $CONFIGFS_HOME/usb_gadget/g1
...
...
...
...
...
...
$ cd $CONFIGFS_HOME/usb_gadget/g1
$ cd $CONFIGFS_HOME/usb_gadget/g1
Each gadget needs to have its vendor id <VID> and product id <PID> specified:
Each gadget needs to have its vendor id <VID> and product id <PID> specified::
$ echo <VID> > idVendor
$ echo <PID> > idProduct
$ echo <VID> > idVendor
$ echo <PID> > idProduct
A gadget also needs its serial number, manufacturer and product strings.
In order to have a place to store them, a strings subdirectory must be created
for each language, e.g.:
for each language, e.g.::
$ mkdir strings/0x409
$ mkdir strings/0x409
Then the strings can be specified:
Then the strings can be specified::
$ echo <serial number> > strings/0x409/serialnumber
$ echo <manufacturer> > strings/0x409/manufacturer
$ echo <product> > strings/0x409/product
$ echo <serial number> > strings/0x409/serialnumber
$ echo <manufacturer> > strings/0x409/manufacturer
$ echo <product> > strings/0x409/product
2. Creating the configurations
------------------------------
@ -99,43 +99,43 @@ directories must be created:
$ mkdir configs/<name>.<number>
where <name> can be any string which is legal in a filesystem and the
<number> is the configuration's number, e.g.:
<number> is the configuration's number, e.g.::
$ mkdir configs/c.1
$ mkdir configs/c.1
...
...
...
...
...
...
Each configuration also needs its strings, so a subdirectory must be created
for each language, e.g.:
for each language, e.g.::
$ mkdir configs/c.1/strings/0x409
$ mkdir configs/c.1/strings/0x409
Then the configuration string can be specified:
Then the configuration string can be specified::
$ echo <configuration> > configs/c.1/strings/0x409/configuration
$ echo <configuration> > configs/c.1/strings/0x409/configuration
Some attributes can also be set for a configuration, e.g.:
Some attributes can also be set for a configuration, e.g.::
$ echo 120 > configs/c.1/MaxPower
$ echo 120 > configs/c.1/MaxPower
3. Creating the functions
-------------------------
The gadget will provide some functions, for each function its corresponding
directory must be created:
directory must be created::
$ mkdir functions/<name>.<instance name>
$ mkdir functions/<name>.<instance name>
where <name> corresponds to one of allowed function names and instance name
is an arbitrary string allowed in a filesystem, e.g.:
is an arbitrary string allowed in a filesystem, e.g.::
$ mkdir functions/ncm.usb0 # usb_f_ncm.ko gets loaded with request_module()
$ mkdir functions/ncm.usb0 # usb_f_ncm.ko gets loaded with request_module()
...
...
...
...
...
...
Each function provides its specific set of attributes, with either read-only
or read-write access. Where applicable they need to be written to as
@ -149,17 +149,17 @@ At this moment a number of gadgets is created, each of which has a number of
configurations specified and a number of functions available. What remains
is specifying which function is available in which configuration (the same
function can be used in multiple configurations). This is achieved with
creating symbolic links:
creating symbolic links::
$ ln -s functions/<name>.<instance name> configs/<name>.<number>
$ ln -s functions/<name>.<instance name> configs/<name>.<number>
e.g.:
e.g.::
$ ln -s functions/ncm.usb0 configs/c.1
$ ln -s functions/ncm.usb0 configs/c.1
...
...
...
...
...
...
5. Enabling the gadget
----------------------
@ -167,123 +167,127 @@ $ ln -s functions/ncm.usb0 configs/c.1
All the above steps serve the purpose of composing the gadget of
configurations and functions.
An example directory structure might look like this:
An example directory structure might look like this::
.
./strings
./strings/0x409
./strings/0x409/serialnumber
./strings/0x409/product
./strings/0x409/manufacturer
./configs
./configs/c.1
./configs/c.1/ncm.usb0 -> ../../../../usb_gadget/g1/functions/ncm.usb0
./configs/c.1/strings
./configs/c.1/strings/0x409
./configs/c.1/strings/0x409/configuration
./configs/c.1/bmAttributes
./configs/c.1/MaxPower
./functions
./functions/ncm.usb0
./functions/ncm.usb0/ifname
./functions/ncm.usb0/qmult
./functions/ncm.usb0/host_addr
./functions/ncm.usb0/dev_addr
./UDC
./bcdUSB
./bcdDevice
./idProduct
./idVendor
./bMaxPacketSize0
./bDeviceProtocol
./bDeviceSubClass
./bDeviceClass
.
./strings
./strings/0x409
./strings/0x409/serialnumber
./strings/0x409/product
./strings/0x409/manufacturer
./configs
./configs/c.1
./configs/c.1/ncm.usb0 -> ../../../../usb_gadget/g1/functions/ncm.usb0
./configs/c.1/strings
./configs/c.1/strings/0x409
./configs/c.1/strings/0x409/configuration
./configs/c.1/bmAttributes
./configs/c.1/MaxPower
./functions
./functions/ncm.usb0
./functions/ncm.usb0/ifname
./functions/ncm.usb0/qmult
./functions/ncm.usb0/host_addr
./functions/ncm.usb0/dev_addr
./UDC
./bcdUSB
./bcdDevice
./idProduct
./idVendor
./bMaxPacketSize0
./bDeviceProtocol
./bDeviceSubClass
./bDeviceClass
Such a gadget must be finally enabled so that the USB host can enumerate it.
In order to enable the gadget it must be bound to a UDC (USB Device Controller).
$ echo <udc name> > UDC
In order to enable the gadget it must be bound to a UDC (USB Device
Controller)::
$ echo <udc name> > UDC
where <udc name> is one of those found in /sys/class/udc/*
e.g.:
e.g.::
$ echo s3c-hsotg > UDC
$ echo s3c-hsotg > UDC
6. Disabling the gadget
-----------------------
$ echo "" > UDC
::
$ echo "" > UDC
7. Cleaning up
--------------
Remove functions from configurations:
Remove functions from configurations::
$ rm configs/<config name>.<number>/<function>
$ rm configs/<config name>.<number>/<function>
where <config name>.<number> specify the configuration and <function> is
a symlink to a function being removed from the configuration, e.g.:
a symlink to a function being removed from the configuration, e.g.::
$ rm configs/c.1/ncm.usb0
$ rm configs/c.1/ncm.usb0
...
...
...
...
...
...
Remove strings directories in configurations
Remove strings directories in configurations:
$ rmdir configs/<config name>.<number>/strings/<lang>
$ rmdir configs/<config name>.<number>/strings/<lang>
e.g.:
e.g.::
$ rmdir configs/c.1/strings/0x409
$ rmdir configs/c.1/strings/0x409
...
...
...
...
...
...
and remove the configurations
and remove the configurations::
$ rmdir configs/<config name>.<number>
$ rmdir configs/<config name>.<number>
e.g.:
e.g.::
rmdir configs/c.1
rmdir configs/c.1
...
...
...
...
...
...
Remove functions (function modules are not unloaded, though)
Remove functions (function modules are not unloaded, though):
$ rmdir functions/<name>.<instance name>
$ rmdir functions/<name>.<instance name>
e.g.:
e.g.::
$ rmdir functions/ncm.usb0
$ rmdir functions/ncm.usb0
...
...
...
...
...
...
Remove strings directories in the gadget
Remove strings directories in the gadget::
$ rmdir strings/<lang>
$ rmdir strings/<lang>
e.g.:
e.g.::
$ rmdir strings/0x409
$ rmdir strings/0x409
and finally remove the gadget:
and finally remove the gadget::
$ cd ..
$ rmdir <gadget name>
$ cd ..
$ rmdir <gadget name>
e.g.:
e.g.::
$ rmdir g1
$ rmdir g1
@ -305,16 +309,16 @@ configured elements. However, they are embedded in usage-specific
larger structures. In the picture below there is a "cs" which contains
a config_item and an "sa" which contains a configfs_attribute.
The filesystem view would be like this:
The filesystem view would be like this::
./
./cs (directory)
|
+--sa (file)
|
.
.
.
./
./cs (directory)
|
+--sa (file)
|
.
.
.
Whenever a user reads/writes the "sa" file, a function is called
which accepts a struct config_item and a struct configfs_attribute.
@ -326,29 +330,31 @@ buffer), while the "store" is for modifying the file's contents (copy data
from the buffer to the cs), but it is up to the implementer of the
two functions to decide what they actually do.
typedef struct configured_structure cs;
typedef struct specific_attribute sa;
::
sa
+----------------------------------+
cs | (*show)(cs *, buffer); |
+-----------------+ | (*store)(cs *, buffer, length); |
| | | |
| +-------------+ | | +------------------+ |
| | struct |-|----|------>|struct | |
| | config_item | | | |configfs_attribute| |
| +-------------+ | | +------------------+ |
| | +----------------------------------+
| data to be set | .
| | .
+-----------------+ .
typedef struct configured_structure cs;
typedef struct specific_attribute sa;
sa
+----------------------------------+
cs | (*show)(cs *, buffer); |
+-----------------+ | (*store)(cs *, buffer, length); |
| | | |
| +-------------+ | | +------------------+ |
| | struct |-|----|------>|struct | |
| | config_item | | | |configfs_attribute| |
| +-------------+ | | +------------------+ |
| | +----------------------------------+
| data to be set | .
| | .
+-----------------+ .
The file names are decided by the config item/group designer, while
the directories in general can be named at will. A group can have
a number of its default sub-groups created automatically.
For more information on configfs please see
Documentation/filesystems/configfs/*.
`Documentation/filesystems/configfs/*`.
The concepts described above translate to USB gadgets like this:

175
Documentation/usb/gadget_hid.txt
View File

@ -1,28 +1,31 @@
Linux USB HID gadget driver
===========================
Linux USB HID gadget driver
===========================
Introduction
============
The HID Gadget driver provides emulation of USB Human Interface
Devices (HID). The basic HID handling is done in the kernel,
and HID reports can be sent/received through I/O on the
/dev/hidgX character devices.
The HID Gadget driver provides emulation of USB Human Interface
Devices (HID). The basic HID handling is done in the kernel,
and HID reports can be sent/received through I/O on the
/dev/hidgX character devices.
For more details about HID, see the developer page on
http://www.usb.org/developers/hidpage/
For more details about HID, see the developer page on
http://www.usb.org/developers/hidpage/
Configuration
=============
g_hid is a platform driver, so to use it you need to add
struct platform_device(s) to your platform code defining the
HID function descriptors you want to use - E.G. something
like:
g_hid is a platform driver, so to use it you need to add
struct platform_device(s) to your platform code defining the
HID function descriptors you want to use - E.G. something
like::
#include <linux/platform_device.h>
#include <linux/usb/g_hid.h>
#include <linux/platform_device.h>
#include <linux/usb/g_hid.h>
/* hid descriptor for a keyboard */
static struct hidg_func_descriptor my_hid_data = {
/* hid descriptor for a keyboard */
static struct hidg_func_descriptor my_hid_data = {
.subclass = 0, /* No subclass */
.protocol = 1, /* Keyboard */
.report_length = 8,
@ -61,85 +64,87 @@ static struct hidg_func_descriptor my_hid_data = {
0x81, 0x00, /* INPUT (Data,Ary,Abs) */
0xc0 /* END_COLLECTION */
}
};
};
static struct platform_device my_hid = {
static struct platform_device my_hid = {
.name = "hidg",
.id = 0,
.num_resources = 0,
.resource = 0,
.dev.platform_data = &my_hid_data,
};
};
You can add as many HID functions as you want, only limited by
the amount of interrupt endpoints your gadget driver supports.
You can add as many HID functions as you want, only limited by
the amount of interrupt endpoints your gadget driver supports.
Configuration with configfs
===========================
Instead of adding fake platform devices and drivers in order to pass
some data to the kernel, if HID is a part of a gadget composed with
configfs the hidg_func_descriptor.report_desc is passed to the kernel
by writing the appropriate stream of bytes to a configfs attribute.
Instead of adding fake platform devices and drivers in order to pass
some data to the kernel, if HID is a part of a gadget composed with
configfs the hidg_func_descriptor.report_desc is passed to the kernel
by writing the appropriate stream of bytes to a configfs attribute.
Send and receive HID reports
============================
HID reports can be sent/received using read/write on the
/dev/hidgX character devices. See below for an example program
to do this.
HID reports can be sent/received using read/write on the
/dev/hidgX character devices. See below for an example program
to do this.
hid_gadget_test is a small interactive program to test the HID
gadget driver. To use, point it at a hidg device and set the
device type (keyboard / mouse / joystick) - E.G.:
hid_gadget_test is a small interactive program to test the HID
gadget driver. To use, point it at a hidg device and set the
device type (keyboard / mouse / joystick) - E.G.::
# hid_gadget_test /dev/hidg0 keyboard
# hid_gadget_test /dev/hidg0 keyboard
You are now in the prompt of hid_gadget_test. You can type any
combination of options and values. Available options and
values are listed at program start. In keyboard mode you can
send up to six values.
You are now in the prompt of hid_gadget_test. You can type any
combination of options and values. Available options and
values are listed at program start. In keyboard mode you can
send up to six values.
For example type: g i s t r --left-shift
For example type: g i s t r --left-shift
Hit return and the corresponding report will be sent by the
HID gadget.
Hit return and the corresponding report will be sent by the
HID gadget.
Another interesting example is the caps lock test. Type
--caps-lock and hit return. A report is then sent by the
gadget and you should receive the host answer, corresponding
to the caps lock LED status.
Another interesting example is the caps lock test. Type
--caps-lock and hit return. A report is then sent by the
gadget and you should receive the host answer, corresponding
to the caps lock LED status::
--caps-lock
recv report:2
--caps-lock
recv report:2
With this command:
With this command::
# hid_gadget_test /dev/hidg1 mouse
# hid_gadget_test /dev/hidg1 mouse
You can test the mouse emulation. Values are two signed numbers.
You can test the mouse emulation. Values are two signed numbers.
Sample code
Sample code::
/* hid_gadget_test */
/* hid_gadget_test */
#include <pthread.h>
#include <string.h>
#include <stdio.h>
#include <ctype.h>
#include <fcntl.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <pthread.h>
#include <string.h>
#include <stdio.h>
#include <ctype.h>
#include <fcntl.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#define BUF_LEN 512
#define BUF_LEN 512
struct options {
struct options {
const char *opt;
unsigned char val;
};
};
static struct options kmod[] = {
static struct options kmod[] = {
{.opt = "--left-ctrl", .val = 0x01},
{.opt = "--right-ctrl", .val = 0x10},
{.opt = "--left-shift", .val = 0x02},
@ -149,9 +154,9 @@ static struct options kmod[] = {
{.opt = "--left-meta", .val = 0x08},
{.opt = "--right-meta", .val = 0x80},
{.opt = NULL}
};
};
static struct options kval[] = {
static struct options kval[] = {
{.opt = "--return", .val = 0x28},
{.opt = "--esc", .val = 0x29},
{.opt = "--bckspc", .val = 0x2a},
@ -183,10 +188,10 @@ static struct options kval[] = {
{.opt = "--up", .val = 0x52},
{.opt = "--num-lock", .val = 0x53},
{.opt = NULL}
};
};
int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
char *tok = strtok(buf, " ");
int key = 0;
int i = 0;
@ -229,17 +234,17 @@ int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold)
fprintf(stderr, "unknown option: %s\n", tok);
}
return 8;
}
}
static struct options mmod[] = {
static struct options mmod[] = {
{.opt = "--b1", .val = 0x01},
{.opt = "--b2", .val = 0x02},
{.opt = "--b3", .val = 0x04},
{.opt = NULL}
};
};
int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
char *tok = strtok(buf, " ");
int mvt = 0;
int i = 0;
@ -274,9 +279,9 @@ int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold)
fprintf(stderr, "unknown option: %s\n", tok);
}
return 3;
}
}
static struct options jmod[] = {
static struct options jmod[] = {
{.opt = "--b1", .val = 0x10},
{.opt = "--b2", .val = 0x20},
{.opt = "--b3", .val = 0x40},
@ -287,10 +292,10 @@ static struct options jmod[] = {
{.opt = "--hat4", .val = 0x03},
{.opt = "--hatneutral", .val = 0x04},
{.opt = NULL}
};
};
int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold)
{
char *tok = strtok(buf, " ");
int mvt = 0;
int i = 0;
@ -326,10 +331,10 @@ int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold)
fprintf(stderr, "unknown option: %s\n", tok);
}
return 4;
}
}
void print_options(char c)
{
void print_options(char c)
{
int i = 0;
if (c == 'k') {
@ -358,10 +363,10 @@ void print_options(char c)
" three signed numbers\n"
"--quit to close\n");
}
}
}
int main(int argc, const char *argv[])
{
int main(int argc, const char *argv[])
{
const char *filename = NULL;
int fd = 0;
char buf[BUF_LEN];
@ -449,4 +454,4 @@ int main(int argc, const char *argv[])
close(fd);
return 0;
}
}

43
Documentation/usb/gadget_multi.txt
View File

@ -1,6 +1,9 @@
-*- org -*-
==============================
Multifunction Composite Gadget
==============================
* Overview
Overview
========
The Multifunction Composite Gadget (or g_multi) is a composite gadget
that makes extensive use of the composite framework to provide
@ -17,13 +20,15 @@ have two configurations -- one with RNDIS and another with CDC ECM[3].
Please note that if you use non-standard configuration (that is enable
CDC ECM) you may need to change vendor and/or product ID.
* Host drivers
Host drivers
============
To make use of the gadget one needs to make it work on host side --
without that there's no hope of achieving anything with the gadget.
As one might expect, things one need to do very from system to system.
** Linux host drivers
Linux host drivers
------------------
Since the gadget uses standard composite framework and appears as such
to Linux host it does not need any additional drivers on Linux host
@ -34,11 +39,13 @@ This is also true for two configuration set-up with RNDIS
configuration being the first one. Linux host will use the second
configuration with CDC ECM which should work better under Linux.
** Windows host drivers
Windows host drivers
--------------------
For the gadget to work under Windows two conditions have to be met:
*** Detecting as composite gadget
Detecting as composite gadget
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
First of all, Windows need to detect the gadget as an USB composite
gadget which on its own have some conditions[4]. If they are met,
@ -53,7 +60,8 @@ The only thing to worry is that the gadget has to have a single
configuration so a dual RNDIS and CDC ECM gadget won't work unless you
create a proper INF -- and of course, if you do submit it!
*** Installing drivers for each function
Installing drivers for each function
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The other, trickier thing is making Windows install drivers for each
individual function.
@ -63,7 +71,8 @@ implementing USB Mass Storage class and selects appropriate driver.
Things are harder with RDNIS and CDC ACM.
**** RNDIS
RNDIS
.....
To make Windows select RNDIS drivers for the first function in the
gadget, one needs to use the [[file:linux.inf]] file provided with this
@ -75,11 +84,13 @@ RNDIS was not the first interface. You do not need to worry abut it
unless you are trying to develop your own gadget in which case watch
out for this bug.
**** CDC ACM
CDC ACM
.......
Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM.
**** Customising the gadget
Customising the gadget
......................
If you intend to hack the g_multi gadget be advised that rearranging
functions will obviously change interface numbers for each of the
@ -97,14 +108,16 @@ things don't work as intended before realising Windows have cached
some drivers information (changing USB port may sometimes help plus
you might try using USBDeview[8] to remove the phantom device).
**** INF testing
INF testing
...........
Provided INF files have been tested on Windows XP SP3, Windows Vista
and Windows 7, all 32-bit versions. It should work on 64-bit versions
as well. It most likely won't work on Windows prior to Windows XP
SP2.
** Other systems
Other systems
-------------
At this moment, drivers for any other systems have not been tested.
Knowing how MacOS is based on BSD and BSD is an Open Source it is
@ -115,7 +128,8 @@ For more exotic systems I have even less to say...
Any testing and drivers *are* *welcome*!
* Authors
Authors
=======
This document has been written by Michal Nazarewicz
([[mailto:mina86@mina86.com]]). INF files have been hacked with
@ -124,7 +138,8 @@ Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS
template[9], Microchip's CDC ACM INF file and David Brownell's
([[mailto:dbrownell@users.sourceforge.net]]) original INF files.
* Footnotes
Footnotes
=========
[1] Remote Network Driver Interface Specification,
[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].

159
Documentation/usb/gadget_printer.txt
View File

@ -1,12 +1,14 @@
===============================
Linux USB Printer Gadget Driver
===============================
Linux USB Printer Gadget Driver
06/04/2007
06/04/2007
Copyright (C) 2007 Craig W. Nadler <craig@nadler.us>
Copyright (C) 2007 Craig W. Nadler <craig@nadler.us>
GENERAL
General
=======
This driver may be used if you are writing printer firmware using Linux as
@ -29,52 +31,60 @@ user space firmware can read or write this status byte using a device file
HOWTO USE THIS DRIVER
Howto Use This Driver
=====================
To load the USB device controller driver and the printer gadget driver. The
following example uses the Netchip 2280 USB device controller driver:
following example uses the Netchip 2280 USB device controller driver::
modprobe net2280
modprobe g_printer
modprobe net2280
modprobe g_printer
The follow command line parameter can be used when loading the printer gadget
(ex: modprobe g_printer idVendor=0x0525 idProduct=0xa4a8 ):
idVendor - This is the Vendor ID used in the device descriptor. The default is
idVendor
This is the Vendor ID used in the device descriptor. The default is
the Netchip vendor id 0x0525. YOU MUST CHANGE TO YOUR OWN VENDOR ID
BEFORE RELEASING A PRODUCT. If you plan to release a product and don't
already have a Vendor ID please see www.usb.org for details on how to
get one.
idProduct - This is the Product ID used in the device descriptor. The default
idProduct
This is the Product ID used in the device descriptor. The default
is 0xa4a8, you should change this to an ID that's not used by any of
your other USB products if you have any. It would be a good idea to
start numbering your products starting with say 0x0001.
bcdDevice - This is the version number of your product. It would be a good idea
bcdDevice
This is the version number of your product. It would be a good idea
to put your firmware version here.
iManufacturer - A string containing the name of the Vendor.
iManufacturer
A string containing the name of the Vendor.
iProduct - A string containing the Product Name.
iProduct
A string containing the Product Name.
iSerialNum - A string containing the Serial Number. This should be changed for
iSerialNum
A string containing the Serial Number. This should be changed for
each unit of your product.
iPNPstring - The PNP ID string used for this printer. You will want to set
iPNPstring
The PNP ID string used for this printer. You will want to set
either on the command line or hard code the PNP ID string used for
your printer product.
qlen - The number of 8k buffers to use per endpoint. The default is 10, you
qlen
The number of 8k buffers to use per endpoint. The default is 10, you
should tune this for your product. You may also want to tune the
size of each buffer for your product.
USING THE EXAMPLE CODE
Using The Example Code
======================
This example code talks to stdout, instead of a print engine.
@ -82,22 +92,23 @@ This example code talks to stdout, instead of a print engine.
To compile the test code below:
1) save it to a file called prn_example.c
2) compile the code with the follow command:
2) compile the code with the follow command::
gcc prn_example.c -o prn_example
To read printer data from the host to stdout:
To read printer data from the host to stdout::
# prn_example -read_data
To write printer data from a file (data_file) to the host:
To write printer data from a file (data_file) to the host::
# cat data_file | prn_example -write_data
To get the current printer status for the gadget driver:
To get the current printer status for the gadget driver:::
# prn_example -get_status
@ -107,60 +118,62 @@ To get the current printer status for the gadget driver:
Printer OK
To set printer to Selected/On-line:
To set printer to Selected/On-line::
# prn_example -selected
To set printer to Not Selected/Off-line:
To set printer to Not Selected/Off-line::
# prn_example -not_selected
To set paper status to paper out:
To set paper status to paper out::
# prn_example -paper_out
To set paper status to paper loaded:
To set paper status to paper loaded::
# prn_example -paper_loaded
To set error status to printer OK:
To set error status to printer OK::
# prn_example -no_error
To set error status to ERROR:
To set error status to ERROR::
# prn_example -error
EXAMPLE CODE
Example Code
============
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <linux/poll.h>
#include <sys/ioctl.h>
#include <linux/usb/g_printer.h>
#define PRINTER_FILE "/dev/g_printer"
#define BUF_SIZE 512
::
/*
* 'usage()' - Show program usage.
*/
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <linux/poll.h>
#include <sys/ioctl.h>
#include <linux/usb/g_printer.h>
static void
usage(const char *option) /* I - Option string or NULL */
{
#define PRINTER_FILE "/dev/g_printer"
#define BUF_SIZE 512
/*
* 'usage()' - Show program usage.
*/
static void
usage(const char *option) /* I - Option string or NULL */
{
if (option) {
fprintf(stderr,"prn_example: Unknown option \"%s\"!\n",
option);
@ -186,12 +199,12 @@ usage(const char *option) /* I - Option string or NULL */
fputs("\n\n", stderr);
exit(1);
}
}
static int
read_printer_data()
{
static int
read_printer_data()
{
struct pollfd fd[1];
/* Open device file for printer gadget. */
@ -236,12 +249,12 @@ read_printer_data()
close(fd[0].fd);
return 0;
}
}
static int
write_printer_data()
{
static int
write_printer_data()
{
struct pollfd fd[1];
/* Open device file for printer gadget. */
@ -295,12 +308,12 @@ write_printer_data()
close(fd[0].fd);
return 0;
}
}
static int
read_NB_printer_data()
{
static int
read_NB_printer_data()
{
int fd;
static char buf[BUF_SIZE];
int bytes_read;
@ -329,12 +342,12 @@ read_NB_printer_data()
close(fd);
return 0;
}
}
static int
get_printer_status()
{
static int
get_printer_status()
{
int retval;
int fd;
@ -357,12 +370,12 @@ get_printer_status()
close(fd);
return(retval);
}
}
static int
set_printer_status(unsigned char buf, int clear_printer_status_bit)
{
static int
set_printer_status(unsigned char buf, int clear_printer_status_bit)
{
int retval;
int fd;
@ -397,12 +410,12 @@ set_printer_status(unsigned char buf, int clear_printer_status_bit)
close(fd);
return 0;
}
}
static int
display_printer_status()
{
static int
display_printer_status()
{
char printer_status;
printer_status = get_printer_status();
@ -429,12 +442,12 @@ display_printer_status()
}
return(0);
}
}
int
main(int argc, char *argv[])
{
int
main(int argc, char *argv[])
{
int i; /* Looping var */
int retval = 0;
@ -507,4 +520,4 @@ main(int argc, char *argv[])
}
exit(retval);
}
}

73
Documentation/usb/gadget_serial.txt
View File

@ -1,7 +1,10 @@
===============================
Linux Gadget Serial Driver v2.0
===============================
Linux Gadget Serial Driver v2.0
11/20/2004
(updated 8-May-2008 for v2.3)
11/20/2004
(updated 8-May-2008 for v2.3)
License and Disclaimer
@ -56,7 +59,7 @@ hardware; for example, a PDA, an embedded Linux system, or a PC
with a USB development card.
The gadget serial driver talks over USB to either a CDC ACM driver
or a generic USB serial driver running on a host PC.
or a generic USB serial driver running on a host PC::
Host
--------------------------------------
@ -112,11 +115,11 @@ configuring the kernel. Then rebuild and install the kernel or
modules.
Then you must load the gadget serial driver. To load it as an
ACM device (recommended for interoperability), do this:
ACM device (recommended for interoperability), do this::
modprobe g_serial
To load it as a vendor specific bulk in/out device, do this:
To load it as a vendor specific bulk in/out device, do this::
modprobe g_serial use_acm=0
@ -127,7 +130,7 @@ desired.
Your system should use mdev (from busybox) or udev to make the
device nodes. After this gadget driver has been set up you should
then see a /dev/ttyGS0 node:
then see a /dev/ttyGS0 node::
# ls -l /dev/ttyGS0 | cat
crw-rw---- 1 root root 253, 0 May 8 14:10 /dev/ttyGS0
@ -187,24 +190,24 @@ support".
Once the gadget serial driver is loaded and the USB device connected
to the Linux host with a USB cable, the host system should recognize
the gadget serial device. For example, the command
the gadget serial device. For example, the command::
cat /sys/kernel/debug/usb/devices
should show something like this:
should show something like this:::
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0525 ProdID=a4a7 Rev= 2.01
S: Manufacturer=Linux 2.6.8.1 with net2280
S: Product=Gadget Serial
S: SerialNumber=0
C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0525 ProdID=a4a7 Rev= 2.01
S: Manufacturer=Linux 2.6.8.1 with net2280
S: Product=Gadget Serial
S: SerialNumber=0
C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
If the host side Linux system is configured properly, the ACM driver
should be loaded automatically. The command "lsmod" should show the
@ -219,29 +222,29 @@ Serial Converter support", and for the "USB Generic Serial Driver".
Once the gadget serial driver is loaded and the USB device connected
to the Linux host with a USB cable, the host system should recognize
the gadget serial device. For example, the command
the gadget serial device. For example, the command::
cat /sys/kernel/debug/usb/devices
should show something like this:
should show something like this:::
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0525 ProdID=a4a6 Rev= 2.01
S: Manufacturer=Linux 2.6.8.1 with net2280
S: Product=Gadget Serial
S: SerialNumber=0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0525 ProdID=a4a6 Rev= 2.01
S: Manufacturer=Linux 2.6.8.1 with net2280
S: Product=Gadget Serial
S: SerialNumber=0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
You must load the usbserial driver and explicitly set its parameters
to configure it to recognize the gadget serial device, like this:
to configure it to recognize the gadget serial device, like this::
echo 0x0525 0xA4A6 >/sys/bus/usb-serial/drivers/generic/new_id
The legacy way is to use module parameters:
The legacy way is to use module parameters::
modprobe usbserial vendor=0x0525 product=0xA4A6

34
Documentation/usb/iuu_phoenix.txt
View File

@ -1,5 +1,6 @@
=============================
Infinity Usb Unlimited Readme
-----------------------------
=============================
Hi all,
@ -19,7 +20,8 @@ have his own device file(/dev/ttyUSB0,/dev/ttyUSB1,...)
How to tune the reader speed ?
How to tune the reader speed?
=============================
A few parameters can be used at load time
To use parameters, just unload the module if it is
@ -27,26 +29,33 @@ How to tune the reader speed ?
In case of prebuilt module, use the command
insmod iuu_phoenix param=value.
Example:
Example::
modprobe iuu_phoenix clockmode=3
modprobe iuu_phoenix clockmode=3
The parameters are:
parm: clockmode:1=3Mhz579,2=3Mhz680,3=6Mhz (int)
parm: boost:overclock boost percent 100 to 500 (int)
parm: cdmode:Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int)
parm: xmas:xmas color enabled or not (bool)
parm: debug:Debug enabled or not (bool)
clockmode:
1=3Mhz579,2=3Mhz680,3=6Mhz (int)
boost:
overclock boost percent 100 to 500 (int)
cdmode:
Card detect mode
0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int)
xmas:
xmas color enabled or not (bool)
debug:
Debug enabled or not (bool)
- clockmode will provide 3 different base settings commonly adopted by
different software:
1. 3Mhz579
1. 3Mhz579
2. 3Mhz680
3. 6Mhz
- boost provide a way to overclock the reader ( my favorite :-) )
For example to have best performance than a simple clockmode=3, try this:
For example to have best performance than a simple clockmode=3, try this::
modprobe boost=195
@ -66,7 +75,8 @@ How to tune the reader speed ?
- debug will produce a lot of debugging messages...
Last notes:
Last notes
==========
Don't worry about the serial settings, the serial emulation
is an abstraction, so use any speed or parity setting will

19
Documentation/usb/mass-storage.txt
View File

@ -1,4 +1,9 @@
* Overview
=========================
Mass Storage Gadget (MSG)
=========================
Overview
========
Mass Storage Gadget (or MSG) acts as a USB Mass Storage device,
appearing to the host as a disk or a CD-ROM drive. It supports
@ -24,7 +29,8 @@
(which is no longer included in Linux). It will talk only briefly
about how to use MSF within composite gadgets.
* Module parameters
Module parameters
=================
The mass storage gadget accepts the following mass storage specific
module parameters:
@ -146,7 +152,8 @@
- iProduct -- USB Product string (string)
- iSerialNumber -- SerialNumber string (sting)
* sysfs entries
sysfs entries
=============
For each logical unit, the gadget creates a directory in the sysfs
hierarchy. Inside of it the following three files are created:
@ -177,7 +184,8 @@
Other then those, as usual, the values of module parameters can be
read from /sys/module/g_mass_storage/parameters/* files.
* Other gadgets using mass storage function
Other gadgets using mass storage function
=========================================
The Mass Storage Gadget uses the Mass Storage Function to handle
mass storage protocol. As a composite function, MSF may be used by
@ -193,7 +201,8 @@
may take a look at mass_storage.c, acm_ms.c and multi.c (sorted by
complexity).
* Relation to file storage gadget
Relation to file storage gadget
===============================
The Mass Storage Function and thus the Mass Storage Gadget has been
based on the File Storage Gadget. The difference between the two is

9
Documentation/usb/misc_usbsevseg.txt
View File

@ -1,4 +1,7 @@
=============================
USB 7-Segment Numeric Display
=============================
Manufactured by Delcom Engineering
Device Information
@ -13,9 +16,13 @@ Device Modes
------------
By default, the driver assumes the display is only 6 characters
The mode for 6 characters is:
MSB 0x06; LSB 0x3f
For the 8 character display:
MSB 0x08; LSB 0xff
The device can accept "text" either in raw, hex, or ascii textmode.
raw controls each segment manually,
hex expects a value between 0-15 per character,
@ -42,5 +49,3 @@ Device Operation
To set multiple decimals points sum up each power.
For example, to set the 0th and 3rd decimal place
echo 1001 > /sys/bus/usb/.../decimals

42
Documentation/usb/mtouchusb.txt
View File

@ -1,19 +1,27 @@
CHANGES
================
mtouchusb driver
================
Changes
=======
- 0.3 - Created based off of scanner & INSTALL from the original touchscreen
driver on freecode (http://freecode.com/projects/3mtouchscreendriver)
- Amended for linux-2.4.18, then 2.4.19
- 0.5 - Complete rewrite using Linux Input in 2.6.3
Unfortunately no calibration support at this time
Unfortunately no calibration support at this time
- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning
Changed reset from standard USB dev reset to vendor reset
Changed data sent to host from compensated to raw coordinates
Eliminated vendor/product module params
Performed multiple successful tests with an EXII-5010UC
Changed reset from standard USB dev reset to vendor reset
Changed data sent to host from compensated to raw coordinates
Eliminated vendor/product module params
Performed multiple successful tests with an EXII-5010UC
SUPPORTED HARDWARE:
Supported Hardware
==================
::
All controllers have the Vendor: 0x0596 & Product: 0x0001
@ -29,9 +37,10 @@ SUPPORTED HARDWARE:
USB Capacitive - Black Case EXII-5030UC
USB Capacitive - No Case EXII-5050UC
DRIVER NOTES:
Driver Notes
============
Installation is simple, you only need to add Linux Input, Linux USB, and the
Installation is simple, you only need to add Linux Input, Linux USB, and the
driver to the kernel. The driver can also be optionally built as a module.
This driver appears to be one of possible 2 Linux USB Input Touchscreen
@ -49,24 +58,27 @@ The controller screen resolution is now 0 to 16384 for both X and Y reporting
the raw touch data. This is the same for the old and new capacitive USB
controllers.
Perhaps at some point an abstract function will be placed into evdev so
generic functions like calibrations, resets, and vendor information can be
Perhaps at some point an abstract function will be placed into evdev so
generic functions like calibrations, resets, and vendor information can be
requested from the userspace (And the drivers would handle the vendor specific
tasks).
TODO:
TODO
====
Implement a control urb again to handle requests to and from the device
such as calibration, etc once/if it becomes available.
DISCLAIMER:
Disclaimer
==========
I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support
I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support
this driver! If you want touch drivers only supported within X, please go to:
http://www.3m.com/3MTouchSystems/
THANKS:
Thanks
======
A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for
testing!

5
Documentation/usb/ohci.txt
View File

@ -1,3 +1,7 @@
====
OHCI
====
23-Aug-2002
The "ohci-hcd" driver is a USB Host Controller Driver (HCD) that is derived
@ -29,4 +33,3 @@ work on while the OS is getting around to the relevant IRQ processing.
- David Brownell
<dbrownell@users.sourceforge.net>

83
Documentation/usb/rio.txt
View File

@ -1,72 +1,80 @@
============
Diamonds Rio
============
Copyright (C) 1999, 2000 Bruce Tenison
Portions Copyright (C) 1999, 2000 David Nelson
Thanks to David Nelson for guidance and the usage of the scanner.txt
and scanner.c files to model our driver and this informative file.
Mar. 2, 2000
CHANGES
Changes
=======
- Initial Revision
OVERVIEW
Overview
========
This README will address issues regarding how to configure the kernel
to access a RIO 500 mp3 player.
to access a RIO 500 mp3 player.
Before I explain how to use this to access the Rio500 please be warned:
W A R N I N G:
--------------
.. warning::
Please note that this software is still under development. The authors
are in no way responsible for any damage that may occur, no matter how
inconsequential.
Please note that this software is still under development. The authors
are in no way responsible for any damage that may occur, no matter how
inconsequential.
It seems that the Rio has a problem when sending .mp3 with low batteries.
I suggest when the batteries are low and you want to transfer stuff that you
replace it with a fresh one. In my case, what happened is I lost two 16kb
blocks (they are no longer usable to store information to it). But I don't
know if that's normal or not; it could simply be a problem with the flash
know if that's normal or not; it could simply be a problem with the flash
memory.
In an extreme case, I left my Rio playing overnight and the batteries wore
down to nothing and appear to have corrupted the flash memory. My RIO
needed to be replaced as a result. Diamond tech support is aware of the
problem. Do NOT allow your batteries to wear down to nothing before
changing them. It appears RIO 500 firmware does not handle low battery
power well at all.
In an extreme case, I left my Rio playing overnight and the batteries wore
down to nothing and appear to have corrupted the flash memory. My RIO
needed to be replaced as a result. Diamond tech support is aware of the
problem. Do NOT allow your batteries to wear down to nothing before
changing them. It appears RIO 500 firmware does not handle low battery
power well at all.
On systems with OHCI controllers, the kernel OHCI code appears to have
power on problems with some chipsets. If you are having problems
connecting to your RIO 500, try turning it on first and then plugging it
into the USB cable.
On systems with OHCI controllers, the kernel OHCI code appears to have
power on problems with some chipsets. If you are having problems
connecting to your RIO 500, try turning it on first and then plugging it
into the USB cable.
Contact information:
--------------------
Contact Information
-------------------
The main page for the project is hosted at sourceforge.net in the following
URL: <http://rio500.sourceforge.net>. You can also go to the project's
sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
There is also a mailing list: rio500-users@lists.sourceforge.net
Authors:
Authors
-------
Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
things work there. Bruce Tenison <btenison@dibbs.net> is adding support
for .fon files and also does testing. The program will mostly sure be
re-written and Pete Ikusz along with the rest will re-design it. I would
also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
with some important information regarding the communication with the Rio.
ADDITIONAL INFORMATION and Userspace tools
Additional Information and userspace tools
http://rio500.sourceforge.net/
http://rio500.sourceforge.net/
REQUIREMENTS
Requirements
============
A host with a USB port. Ideally, either a UHCI (Intel) or OHCI
(Compaq and others) hardware port should work.
@ -80,11 +88,11 @@ A Linux kernel with RIO 500 support enabled.
'lspci' which is only needed to determine the type of USB hardware
available in your machine.
CONFIGURATION
Configuration
Using `lspci -v`, determine the type of USB hardware available.
If you see something like:
If you see something like::
USB Controller: ......
Flags: .....
@ -92,7 +100,7 @@ Using `lspci -v`, determine the type of USB hardware available.
Then you have a UHCI based controller.
If you see something like:
If you see something like::
USB Controller: .....
Flags: ....
@ -107,8 +115,9 @@ hardware (determined from the steps above), 'USB Diamond Rio500 support', and
(you may need to execute `depmod -a` to update the module
dependencies).
Add a device for the USB rio500:
`mknod /dev/usb/rio500 c 180 64`
Add a device for the USB rio500::
mknod /dev/usb/rio500 c 180 64
Set appropriate permissions for /dev/usb/rio500 (don't forget about
group and world permissions). Both read and write permissions are
@ -116,12 +125,14 @@ required for proper operation.
Load the appropriate modules (if compiled as modules):
OHCI:
OHCI::
modprobe usbcore
modprobe usb-ohci
modprobe rio500
UHCI:
UHCI::
modprobe usbcore
modprobe usb-uhci (or uhci)
modprobe rio500
@ -129,10 +140,10 @@ Load the appropriate modules (if compiled as modules):
That's it. The Rio500 Utils at: http://rio500.sourceforge.net should
be able to access the rio500.
BUGS
Bugs
====
If you encounter any problems feel free to drop me an email.
Bruce Tenison
btenison@dibbs.net

21
Documentation/usb/usb-help.txt
View File

@ -1,16 +1,17 @@
usb-help.txt
==============
USB references
==============
2008-Mar-7
For USB help other than the readme files that are located in
Documentation/usb/*, see the following:
`Documentation/usb/*`, see the following:
Linux-USB project: http://www.linux-usb.org
mirrors at http://usb.in.tum.de/linux-usb/
and http://it.linux-usb.org
Linux USB Guide: http://linux-usb.sourceforge.net
Linux-USB device overview (working devices and drivers):
http://www.qbik.ch/usb/devices/
- Linux-USB project: http://www.linux-usb.org
mirrors at http://usb.in.tum.de/linux-usb/
and http://it.linux-usb.org
- Linux USB Guide: http://linux-usb.sourceforge.net
- Linux-USB device overview (working devices and drivers):
http://www.qbik.ch/usb/devices/
The Linux-USB mailing list is at linux-usb@vger.kernel.org
###

205
Documentation/usb/usb-serial.txt
View File

@ -1,4 +1,9 @@
INTRODUCTION
==========
USB serial
==========
Introduction
============
The USB serial driver currently supports a number of different USB to
serial converter products, as well as some devices that use a serial
@ -8,13 +13,15 @@ INTRODUCTION
the different devices.
CONFIGURATION
Configuration
=============
Currently the driver can handle up to 256 different serial interfaces at
one time.
one time.
The major number that the driver uses is 188 so to use the driver,
create the following nodes:
create the following nodes::
mknod /dev/ttyUSB0 c 188 0
mknod /dev/ttyUSB1 c 188 1
mknod /dev/ttyUSB2 c 188 2
@ -28,12 +35,14 @@ CONFIGURATION
When the device is connected and recognized by the driver, the driver
will print to the system log, which node(s) the device has been bound
to.
SPECIFIC DEVICES SUPPORTED
Specific Devices Supported
==========================
ConnectTech WhiteHEAT 4 port converter
--------------------------------------
ConnectTech has been very forthcoming with information about their
device, including providing a unit to test with.
@ -46,6 +55,7 @@ ConnectTech WhiteHEAT 4 port converter
HandSpring Visor, Palm USB, and Clié USB driver
-----------------------------------------------
This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
devices.
@ -62,7 +72,7 @@ HandSpring Visor, Palm USB, and Clié USB driver
This goes against the current documentation for pilot-xfer and other
packages, but is the only way that it will work due to the hardware
in the device.
When the device is connected, try talking to it on the second port
(this is usually /dev/ttyUSB1 if you do not have any other usb-serial
devices in the system.) The system log should tell you which port is
@ -78,10 +88,10 @@ HandSpring Visor, Palm USB, and Clié USB driver
try resetting the device, first a hot reset, and then a cold reset if
necessary. Some devices need this before they can talk to the USB port
properly.
Devices that are not compiled into the kernel can be specified with module
parameters. e.g. modprobe visor vendor=0x54c product=0x66
There is a webpage and mailing lists for this portion of the driver at:
http://sourceforge.net/projects/usbvisor/
@ -90,6 +100,7 @@ HandSpring Visor, Palm USB, and Clié USB driver
PocketPC PDA Driver
-------------------
This driver can be used to connect to Compaq iPAQ, HP Jornada, Casio EM500
and other PDAs running Windows CE 3.0 or PocketPC 2002 using a USB
@ -135,12 +146,13 @@ PocketPC PDA Driver
be used to flash the ROM, as well as the microP code.. so much for needing
Toshiba's $350 serial cable for flashing!! :D
NOTE: This has NOT been tested. Use at your own risk.
For any questions or problems with the driver, please contact Ganesh
Varadarajan <ganesh@veritas.com>
Keyspan PDA Serial Adapter
--------------------------
Single port DB-9 serial adapter, pushed as a PDA adapter for iMacs (mostly
sold in Macintosh catalogs, comes in a translucent white/green dongle).
@ -148,32 +160,37 @@ Keyspan PDA Serial Adapter
This driver also works for the Xircom/Entrega single port serial adapter.
Current status:
Things that work:
basic input/output (tested with 'cu')
blocking write when serial line can't keep up
changing baud rates (up to 115200)
getting/setting modem control pins (TIOCM{GET,SET,BIS,BIC})
sending break (although duration looks suspect)
- basic input/output (tested with 'cu')
- blocking write when serial line can't keep up
- changing baud rates (up to 115200)
- getting/setting modem control pins (TIOCM{GET,SET,BIS,BIC})
- sending break (although duration looks suspect)
Things that don't:
device strings (as logged by kernel) have trailing binary garbage
device ID isn't right, might collide with other Keyspan products
changing baud rates ought to flush tx/rx to avoid mangled half characters
- device strings (as logged by kernel) have trailing binary garbage
- device ID isn't right, might collide with other Keyspan products
- changing baud rates ought to flush tx/rx to avoid mangled half characters
Big Things on the todo list:
parity, 7 vs 8 bits per char, 1 or 2 stop bits
HW flow control
not all of the standard USB descriptors are handled: Get_Status, Set_Feature
O_NONBLOCK, select()
- parity, 7 vs 8 bits per char, 1 or 2 stop bits
- HW flow control
- not all of the standard USB descriptors are handled:
Get_Status, Set_Feature, O_NONBLOCK, select()
For any questions or problems with this driver, please contact Brian
Warner at warner@lothar.com
Warner at warner@lothar.com
Keyspan USA-series Serial Adapters
----------------------------------
Single, Dual and Quad port adapters - driver uses Keyspan supplied
Single, Dual and Quad port adapters - driver uses Keyspan supplied
firmware and is being developed with their support.
Current status:
The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and
have been pretty thoroughly tested at various baud rates with 8-N-1
character settings. Other character lengths and parity setups are
@ -182,32 +199,37 @@ Keyspan USA-series Serial Adapters
The USA-28 isn't yet supported though doing so should be pretty
straightforward. Contact the maintainer if you require this
functionality.
More information is available at:
http://www.carnationsoftware.com/carnation/Keyspan.html
For any questions or problems with this driver, please contact Hugh
Blemings at hugh@misc.nu
FTDI Single Port Serial Driver
------------------------------
This is a single port DB-25 serial adapter.
Devices supported include:
-TripNav TN-200 USB GPS
-Navis Engineering Bureau CH-4711 USB GPS
- TripNav TN-200 USB GPS
- Navis Engineering Bureau CH-4711 USB GPS
For any questions or problems with this driver, please contact Bill Ryder.
ZyXEL omni.net lcd plus ISDN TA
-------------------------------
This is an ISDN TA. Please report both successes and troubles to
azummo@towertech.it
Cypress M8 CY4601 Family Serial Driver
--------------------------------------
This driver was in most part developed by Neil "koyama" Whelchel. It
has been improved since that previous form to support dynamic serial
@ -215,18 +237,19 @@ Cypress M8 CY4601 Family Serial Driver
part stable and has been tested on an smp machine. (dual p2)
Chipsets supported under CY4601 family:
CY7C63723, CY7C63742, CY7C63743, CY7C64013
Devices supported:
-DeLorme's USB Earthmate GPS (SiRF Star II lp arch)
-Cypress HID->COM RS232 adapter
Note: Cypress Semiconductor claims no affiliation with the
- DeLorme's USB Earthmate GPS (SiRF Star II lp arch)
- Cypress HID->COM RS232 adapter
Note:
Cypress Semiconductor claims no affiliation with the
hid->com device.
Most devices using chipsets under the CY4601 family should
Most devices using chipsets under the CY4601 family should
work with the driver. As long as they stay true to the CY4601
usbserial specification.
@ -236,8 +259,9 @@ Cypress M8 CY4601 Family Serial Driver
upon start init to this setting. usbserial core provides the rest
of the termios settings, along with some custom termios so that the
output is in proper format and parsable.
The device can be put into sirf mode by issuing NMEA command:
The device can be put into sirf mode by issuing NMEA command::
$PSRF100,<protocol>,<baud>,<databits>,<stopbits>,<parity>*CHECKSUM
$PSRF100,0,9600,8,1,0*0C
@ -259,11 +283,14 @@ Cypress M8 CY4601 Family Serial Driver
If you have any questions, problems, patches, feature requests, etc. you can
contact me here via email:
dignome@gmail.com
(your problems/patches can alternately be submitted to usb-devel)
Digi AccelePort Driver
----------------------
This driver supports the Digi AccelePort USB 2 and 4 devices, 2 port
(plus a parallel port) and 4 port USB serial converters. The driver
@ -285,42 +312,49 @@ Digi AccelePort Driver
Belkin USB Serial Adapter F5U103
--------------------------------
Single port DB-9/PS-2 serial adapter from Belkin with firmware by eTEK Labs.
The Peracom single port serial adapter also works with this driver, as
well as the GoHubs adapter.
Current status:
The following have been tested and work:
Baud rate 300-230400
Data bits 5-8
Stop bits 1-2
Parity N,E,O,M,S
Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR)*
Break Set and clear
Line control Input/Output query and control **
* Hardware input flow control is only enabled for firmware
The following have been tested and work:
- Baud rate 300-230400
- Data bits 5-8
- Stop bits 1-2
- Parity N,E,O,M,S
- Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR) [1]_
- Break Set and clear
- Line control Input/Output query and control [2]_
.. [1]
Hardware input flow control is only enabled for firmware
levels above 2.06. Read source code comments describing Belkin
firmware errata. Hardware output flow control is working for all
firmware versions.
** Queries of inputs (CTS,DSR,CD,RI) show the last
.. [2]
Queries of inputs (CTS,DSR,CD,RI) show the last
reported state. Queries of outputs (DTR,RTS) show the last
requested state and may not reflect current state as set by
automatic hardware flow control.
TO DO List:
-- Add true modem control line query capability. Currently tracks the
states reported by the interrupt and the states requested.
-- Add error reporting back to application for UART error conditions.
-- Add support for flush ioctls.
-- Add everything else that is missing :)
- Add true modem control line query capability. Currently tracks the
states reported by the interrupt and the states requested.
- Add error reporting back to application for UART error conditions.
- Add support for flush ioctls.
- Add everything else that is missing :)
For any questions or problems with this driver, please contact William
Greathouse at wgreathouse@smva.com
Empeg empeg-car Mark I/II Driver
--------------------------------
This is an experimental driver to provide connectivity support for the
client synchronization tools for an Empeg empeg-car mp3 player.
@ -335,6 +369,7 @@ Empeg empeg-car Mark I/II Driver
MCT USB Single Port Serial Adapter U232
---------------------------------------
This driver is for the MCT USB-RS232 Converter (25 pin, Model No.
U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
@ -355,35 +390,39 @@ MCT USB Single Port Serial Adapter U232
Inside Out Networks Edgeport Driver
-----------------------------------
This driver supports all devices made by Inside Out Networks, specifically
the following models:
Edgeport/4
Rapidport/4
Edgeport/4t
Edgeport/2
Edgeport/4i
Edgeport/2i
Edgeport/421
Edgeport/21
Edgeport/8
Edgeport/8 Dual
Edgeport/2D8
Edgeport/4D8
Edgeport/8i
Edgeport/2 DIN
Edgeport/4 DIN
Edgeport/16 Dual
- Edgeport/4
- Rapidport/4
- Edgeport/4t
- Edgeport/2
- Edgeport/4i
- Edgeport/2i
- Edgeport/421
- Edgeport/21
- Edgeport/8
- Edgeport/8 Dual
- Edgeport/2D8
- Edgeport/4D8
- Edgeport/8i
- Edgeport/2 DIN
- Edgeport/4 DIN
- Edgeport/16 Dual
For any questions or problems with this driver, please contact Greg
Kroah-Hartman at greg@kroah.com
REINER SCT cyberJack pinpad/e-com USB chipcard reader
-----------------------------------------------------
Interface to ISO 7816 compatible contactbased chipcards, e.g. GSM SIMs.
Current status:
This is the kernel part of the driver for this USB card reader.
There is also a user part for a CT-API driver available. A site
for downloading is TBA. For now, you can request it from the
@ -394,6 +433,7 @@ REINER SCT cyberJack pinpad/e-com USB chipcard reader
Prolific PL2303 Driver
----------------------
This driver supports any device that has the PL2303 chip from Prolific
in it. This includes a number of single port USB to serial converters,
@ -403,11 +443,13 @@ Prolific PL2303 Driver
For any questions or problems with this driver, please contact Greg
Kroah-Hartman at greg@kroah.com
KL5KUSB105 chipset / PalmConnect USB single-port adapter
--------------------------------------------------------
Current status:
The driver was put together by looking at the usb bus transactions
done by Palm's driver under Windows, so a lot of functionality is
still missing. Notably, serial ioctls are sometimes faked or not yet
@ -417,21 +459,25 @@ Current status:
are supported, but handshaking (software or hardware) is not, which is
why it is wise to cut down on the rate used is wise for large
transfers until this is settled.
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
information on this driver.
Winchiphead CH341 Driver
------------------------
This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip
also implements an IEEE 1284 parallel port, I2C and SPI, but that is not
supported by the driver. The protocol was analyzed from the behaviour
of the Windows driver, no datasheet is available at present.
The manufacturer's website: http://www.winchiphead.com/.
For any questions or problems with this driver, please contact
frank@kingswood-consulting.co.uk.
Moschip MCS7720, MCS7715 driver
-------------------------------
These chips are present in devices sold by various manufacturers, such as Syba
and Cables Unlimited. There may be others. The 7720 provides two serial
@ -449,20 +495,24 @@ Moschip MCS7720, MCS7715 driver
don't have one of these devices, so I can't say for sure.
Generic Serial driver
---------------------
If your device is not one of the above listed devices, compatible with
the above models, you can try out the "generic" interface. This
interface does not provide any type of control messages sent to the
device, and does not support any kind of device flow control. All that
is required of your device is that it has at least one bulk in endpoint,
or one bulk out endpoint.
or one bulk out endpoint.
To enable the generic driver to recognize your device, provide::
To enable the generic driver to recognize your device, provide
echo <vid> <pid> >/sys/bus/usb-serial/drivers/generic/new_id
where the <vid> and <pid> is replaced with the hex representation of your
device's vendor id and product id.
If the driver is compiled as a module you can also provide one id when
loading the module
loading the module::
insmod usbserial vendor=0x#### product=0x####
This driver has been successfully used to connect to the NetChip USB
@ -473,7 +523,8 @@ Generic Serial driver
Kroah-Hartman at greg@kroah.com
CONTACT:
Contact
=======
If anyone has any problems using these drivers, with any of the above
specified products, please contact the specific driver's author listed

552
Documentation/usb/usbip_protocol.txt
View File

@ -1,3 +1,7 @@
===============
USB/IP protocol
===============
PRELIMINARY DRAFT, MAY CONTAIN MISTAKES!
28 Jun 2011
@ -12,6 +16,8 @@ in one or more pieces at the low level transport layer). The server sends back
the OP_REP_DEVLIST packet which lists the exported USB devices. Finally the
TCP/IP connection is closed.
::
virtual host controller usb host
"client" "server"
(imports USB devices) (exports USB devices)
@ -32,6 +38,8 @@ send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and
USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
::
virtual host controller usb host
"client" "server"
(imports USB devices) (exports USB devices)
@ -88,270 +96,316 @@ The fields are in network (big endian) byte order meaning that the most signific
byte (MSB) is stored at the lowest address.
OP_REQ_DEVLIST: Retrieve the list of exported USB devices.
OP_REQ_DEVLIST:
Retrieve the list of exported USB devices.
Offset | Length | Value | Description
-----------+--------+------------+---------------------------------------------------
0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0
-----------+--------+------------+---------------------------------------------------
2 | 2 | 0x8005 | Command code: Retrieve the list of exported USB
| | | devices.
-----------+--------+------------+---------------------------------------------------
4 | 4 | 0x00000000 | Status: unused, shall be set to 0
+-----------+--------+------------+---------------------------------------------------+
| Offset | Length | Value | Description |
+===========+========+============+===================================================+
| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 |
+-----------+--------+------------+---------------------------------------------------+
| 2 | 2 | 0x8005 | Command code: Retrieve the list of exported USB |
| | | | devices. |
+-----------+--------+------------+---------------------------------------------------+
| 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 |
+-----------+--------+------------+---------------------------------------------------+
OP_REP_DEVLIST: Reply with the list of exported USB devices.
OP_REP_DEVLIST:
Reply with the list of exported USB devices.
Offset | Length | Value | Description
-----------+--------+------------+---------------------------------------------------
0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0.
-----------+--------+------------+---------------------------------------------------
2 | 2 | 0x0005 | Reply code: The list of exported USB devices.
-----------+--------+------------+---------------------------------------------------
4 | 4 | 0x00000000 | Status: 0 for OK
-----------+--------+------------+---------------------------------------------------
8 | 4 | n | Number of exported devices: 0 means no exported
| | | devices.
-----------+--------+------------+---------------------------------------------------
0x0C | | | From now on the exported n devices are described,
| | | if any. If no devices are exported the message
| | | ends with the previous "number of exported
| | | devices" field.
-----------+--------+------------+---------------------------------------------------
| 256 | | path: Path of the device on the host exporting the
| | | USB device, string closed with zero byte, e.g.
| | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"
| | | The unused bytes shall be filled with zero
| | | bytes.
-----------+--------+------------+---------------------------------------------------
0x10C | 32 | | busid: Bus ID of the exported device, string
| | | closed with zero byte, e.g. "3-2". The unused
| | | bytes shall be filled with zero bytes.
-----------+--------+------------+---------------------------------------------------
0x12C | 4 | | busnum
-----------+--------+------------+---------------------------------------------------
0x130 | 4 | | devnum
-----------+--------+------------+---------------------------------------------------
0x134 | 4 | | speed
-----------+--------+------------+---------------------------------------------------
0x138 | 2 | | idVendor
-----------+--------+------------+---------------------------------------------------
0x13A | 2 | | idProduct
-----------+--------+------------+---------------------------------------------------
0x13C | 2 | | bcdDevice
-----------+--------+------------+---------------------------------------------------
0x13E | 1 | | bDeviceClass
-----------+--------+------------+---------------------------------------------------
0x13F | 1 | | bDeviceSubClass
-----------+--------+------------+---------------------------------------------------
0x140 | 1 | | bDeviceProtocol
-----------+--------+------------+---------------------------------------------------
0x141 | 1 | | bConfigurationValue
-----------+--------+------------+---------------------------------------------------
0x142 | 1 | | bNumConfigurations
-----------+--------+------------+---------------------------------------------------
0x143 | 1 | | bNumInterfaces
-----------+--------+------------+---------------------------------------------------
0x144 | | m_0 | From now on each interface is described, all
| | | together bNumInterfaces times, with the
| | | the following 4 fields:
-----------+--------+------------+---------------------------------------------------
| 1 | | bInterfaceClass
-----------+--------+------------+---------------------------------------------------
0x145 | 1 | | bInterfaceSubClass
-----------+--------+------------+---------------------------------------------------
0x146 | 1 | | bInterfaceProtocol
-----------+--------+------------+---------------------------------------------------
0x147 | 1 | | padding byte for alignment, shall be set to zero
-----------+--------+------------+---------------------------------------------------
0xC + | | | The second exported USB device starts at i=1
i*0x138 + | | | with the busid field.
m_(i-1)*4 | | |
+-----------+--------+------------+---------------------------------------------------+
| Offset | Length | Value | Description |
+===========+========+============+===================================================+
| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0.|
+-----------+--------+------------+---------------------------------------------------+
| 2 | 2 | 0x0005 | Reply code: The list of exported USB devices. |
+-----------+--------+------------+---------------------------------------------------+
| 4 | 4 | 0x00000000 | Status: 0 for OK |
+-----------+--------+------------+---------------------------------------------------+
| 8 | 4 | n | Number of exported devices: 0 means no exported |
| | | | devices. |
+-----------+--------+------------+---------------------------------------------------+
| 0x0C | | | From now on the exported n devices are described, |
| | | | if any. If no devices are exported the message |
| | | | ends with the previous "number of exported |
| | | | devices" field. |
+-----------+--------+------------+---------------------------------------------------+
| | 256 | | path: Path of the device on the host exporting the|
| | | | USB device, string closed with zero byte, e.g. |
| | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" |
| | | | The unused bytes shall be filled with zero |
| | | | bytes. |
+-----------+--------+------------+---------------------------------------------------+
| 0x10C | 32 | | busid: Bus ID of the exported device, string |
| | | | closed with zero byte, e.g. "3-2". The unused |
| | | | bytes shall be filled with zero bytes. |
+-----------+--------+------------+---------------------------------------------------+
| 0x12C | 4 | | busnum |
+-----------+--------+------------+---------------------------------------------------+
| 0x130 | 4 | | devnum |
+-----------+--------+------------+---------------------------------------------------+
| 0x134 | 4 | | speed |
+-----------+--------+------------+---------------------------------------------------+
| 0x138 | 2 | | idVendor |
+-----------+--------+------------+---------------------------------------------------+
| 0x13A | 2 | | idProduct |
+-----------+--------+------------+---------------------------------------------------+
| 0x13C | 2 | | bcdDevice |
+-----------+--------+------------+---------------------------------------------------+
| 0x13E | 1 | | bDeviceClass |
+-----------+--------+------------+---------------------------------------------------+
| 0x13F | 1 | | bDeviceSubClass |
+-----------+--------+------------+---------------------------------------------------+
| 0x140 | 1 | | bDeviceProtocol |
+-----------+--------+------------+---------------------------------------------------+
| 0x141 | 1 | | bConfigurationValue |
+-----------+--------+------------+---------------------------------------------------+
| 0x142 | 1 | | bNumConfigurations |
+-----------+--------+------------+---------------------------------------------------+
| 0x143 | 1 | | bNumInterfaces |
+-----------+--------+------------+---------------------------------------------------+
| 0x144 | | m_0 | From now on each interface is described, all |
| | | | together bNumInterfaces times, with the |
| | | | the following 4 fields: |
+-----------+--------+------------+---------------------------------------------------+
| | 1 | | bInterfaceClass |
+-----------+--------+------------+---------------------------------------------------+
| 0x145 | 1 | | bInterfaceSubClass |
+-----------+--------+------------+---------------------------------------------------+
| 0x146 | 1 | | bInterfaceProtocol |
+-----------+--------+------------+---------------------------------------------------+
| 0x147 | 1 | | padding byte for alignment, shall be set to zero |
+-----------+--------+------------+---------------------------------------------------+
| 0xC + | | | The second exported USB device starts at i=1 |
| i*0x138 + | | | with the busid field. |
| m_(i-1)*4 | | | |
+-----------+--------+------------+---------------------------------------------------+
OP_REQ_IMPORT: Request to import (attach) a remote USB device.
OP_REQ_IMPORT:
Request to import (attach) a remote USB device.
Offset | Length | Value | Description
-----------+--------+------------+---------------------------------------------------
0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0
-----------+--------+------------+---------------------------------------------------
2 | 2 | 0x8003 | Command code: import a remote USB device.
-----------+--------+------------+---------------------------------------------------
4 | 4 | 0x00000000 | Status: unused, shall be set to 0
-----------+--------+------------+---------------------------------------------------
8 | 32 | | busid: the busid of the exported device on the
| | | remote host. The possible values are taken
| | | from the message field OP_REP_DEVLIST.busid.
| | | A string closed with zero, the unused bytes
| | | shall be filled with zeros.
-----------+--------+------------+---------------------------------------------------
+-----------+--------+------------+---------------------------------------------------+
| Offset | Length | Value | Description |
+===========+========+============+===================================================+
| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 |
+-----------+--------+------------+---------------------------------------------------+
| 2 | 2 | 0x8003 | Command code: import a remote USB device. |
+-----------+--------+------------+---------------------------------------------------+
| 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 |
+-----------+--------+------------+---------------------------------------------------+
| 8 | 32 | | busid: the busid of the exported device on the |
| | | | remote host. The possible values are taken |
| | | | from the message field OP_REP_DEVLIST.busid. |
| | | | A string closed with zero, the unused bytes |
| | | | shall be filled with zeros. |
+-----------+--------+------------+---------------------------------------------------+
OP_REP_IMPORT: Reply to import (attach) a remote USB device.
OP_REP_IMPORT:
Reply to import (attach) a remote USB device.
Offset | Length | Value | Description
-----------+--------+------------+---------------------------------------------------
0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0
-----------+--------+------------+---------------------------------------------------
2 | 2 | 0x0003 | Reply code: Reply to import.
-----------+--------+------------+---------------------------------------------------
4 | 4 | 0x00000000 | Status: 0 for OK
| | | 1 for error
-----------+--------+------------+---------------------------------------------------
8 | | | From now on comes the details of the imported
| | | device, if the previous status field was OK (0),
| | | otherwise the reply ends with the status field.
-----------+--------+------------+---------------------------------------------------
| 256 | | path: Path of the device on the host exporting the
| | | USB device, string closed with zero byte, e.g.
| | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"
| | | The unused bytes shall be filled with zero
| | | bytes.
-----------+--------+------------+---------------------------------------------------
0x108 | 32 | | busid: Bus ID of the exported device, string
| | | closed with zero byte, e.g. "3-2". The unused
| | | bytes shall be filled with zero bytes.
-----------+--------+------------+---------------------------------------------------
0x128 | 4 | | busnum
-----------+--------+------------+---------------------------------------------------
0x12C | 4 | | devnum
-----------+--------+------------+---------------------------------------------------
0x130 | 4 | | speed
-----------+--------+------------+---------------------------------------------------
0x134 | 2 | | idVendor
-----------+--------+------------+---------------------------------------------------
0x136 | 2 | | idProduct
-----------+--------+------------+---------------------------------------------------
0x138 | 2 | | bcdDevice
-----------+--------+------------+---------------------------------------------------
0x139 | 1 | | bDeviceClass
-----------+--------+------------+---------------------------------------------------
0x13A | 1 | | bDeviceSubClass
-----------+--------+------------+---------------------------------------------------
0x13B | 1 | | bDeviceProtocol
-----------+--------+------------+---------------------------------------------------
0x13C | 1 | | bConfigurationValue
-----------+--------+------------+---------------------------------------------------
0x13D | 1 | | bNumConfigurations
-----------+--------+------------+---------------------------------------------------
0x13E | 1 | | bNumInterfaces
+-----------+--------+------------+---------------------------------------------------+
| Offset | Length | Value | Description |
+===========+========+============+===================================================+
| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 |
+-----------+--------+------------+---------------------------------------------------+
| 2 | 2 | 0x0003 | Reply code: Reply to import. |
+-----------+--------+------------+---------------------------------------------------+
| 4 | 4 | 0x00000000 | Status: |
| | | | |
| | | | - 0 for OK |
| | | | - 1 for error |
+-----------+--------+------------+---------------------------------------------------+
| 8 | | | From now on comes the details of the imported |
| | | | device, if the previous status field was OK (0), |
| | | | otherwise the reply ends with the status field. |
+-----------+--------+------------+---------------------------------------------------+
| | 256 | | path: Path of the device on the host exporting the|
| | | | USB device, string closed with zero byte, e.g. |
| | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" |
| | | | The unused bytes shall be filled with zero |
| | | | bytes. |
+-----------+--------+------------+---------------------------------------------------+
| 0x108 | 32 | | busid: Bus ID of the exported device, string |
| | | | closed with zero byte, e.g. "3-2". The unused |
| | | | bytes shall be filled with zero bytes. |
+-----------+--------+------------+---------------------------------------------------+
| 0x128 | 4 | | busnum |
+-----------+--------+------------+---------------------------------------------------+
| 0x12C | 4 | | devnum |
+-----------+--------+------------+---------------------------------------------------+
| 0x130 | 4 | | speed |
+-----------+--------+------------+---------------------------------------------------+
| 0x134 | 2 | | idVendor |
+-----------+--------+------------+---------------------------------------------------+
| 0x136 | 2 | | idProduct |
+-----------+--------+------------+---------------------------------------------------+
| 0x138 | 2 | | bcdDevice |
+-----------+--------+------------+---------------------------------------------------+
| 0x139 | 1 | | bDeviceClass |
+-----------+--------+------------+---------------------------------------------------+
| 0x13A | 1 | | bDeviceSubClass |
+-----------+--------+------------+---------------------------------------------------+
| 0x13B | 1 | | bDeviceProtocol |
+-----------+--------+------------+---------------------------------------------------+
| 0x13C | 1 | | bConfigurationValue |
+-----------+--------+------------+---------------------------------------------------+
| 0x13D | 1 | | bNumConfigurations |
+-----------+--------+------------+---------------------------------------------------+
| 0x13E | 1 | | bNumInterfaces |
+-----------+--------+------------+---------------------------------------------------+
USBIP_CMD_SUBMIT: Submit an URB
USBIP_CMD_SUBMIT:
Submit an URB
Offset | Length | Value | Description
-----------+--------+------------+---------------------------------------------------
0 | 4 | 0x00000001 | command: Submit an URB
-----------+--------+------------+---------------------------------------------------
4 | 4 | | seqnum: the sequence number of the URB to submit
-----------+--------+------------+---------------------------------------------------
8 | 4 | | devid
-----------+--------+------------+---------------------------------------------------
0xC | 4 | | direction: 0: USBIP_DIR_OUT
| | | 1: USBIP_DIR_IN
-----------+--------+------------+---------------------------------------------------
0x10 | 4 | | ep: endpoint number, possible values are: 0...15
-----------+--------+------------+---------------------------------------------------
0x14 | 4 | | transfer_flags: possible values depend on the
| | | URB transfer type, see below
-----------+--------+------------+---------------------------------------------------
0x18 | 4 | | transfer_buffer_length
-----------+--------+------------+---------------------------------------------------
0x1C | 4 | | start_frame: specify the selected frame to
| | | transmit an ISO frame, ignored if URB_ISO_ASAP
| | | is specified at transfer_flags
-----------+--------+------------+---------------------------------------------------
0x20 | 4 | | number_of_packets: number of ISO packets
-----------+--------+------------+---------------------------------------------------
0x24 | 4 | | interval: maximum time for the request on the
| | | server-side host controller
-----------+--------+------------+---------------------------------------------------
0x28 | 8 | | setup: data bytes for USB setup, filled with
| | | zeros if not used
-----------+--------+------------+---------------------------------------------------
0x30 | | | URB data. For ISO transfers the padding between
| | | each ISO packets is not transmitted.
+-----------+--------+------------+---------------------------------------------------+
| Offset | Length | Value | Description |
+===========+========+============+===================================================+
| 0 | 4 | 0x00000001 | command: Submit an URB |
+-----------+--------+------------+---------------------------------------------------+
| 4 | 4 | | seqnum: the sequence number of the URB to submit |
+-----------+--------+------------+---------------------------------------------------+
| 8 | 4 | | devid |
+-----------+--------+------------+---------------------------------------------------+
| 0xC | 4 | | direction: |
| | | | |
| | | | - 0: USBIP_DIR_OUT |
| | | | - 1: USBIP_DIR_IN |
+-----------+--------+------------+---------------------------------------------------+
| 0x10 | 4 | | ep: endpoint number, possible values are: 0...15 |
+-----------+--------+------------+---------------------------------------------------+
| 0x14 | 4 | | transfer_flags: possible values depend on the |
| | | | URB transfer type, see below |
+-----------+--------+------------+---------------------------------------------------+
| 0x18 | 4 | | transfer_buffer_length |
+-----------+--------+------------+---------------------------------------------------+
| 0x1C | 4 | | start_frame: specify the selected frame to |
| | | | transmit an ISO frame, ignored if URB_ISO_ASAP |
| | | | is specified at transfer_flags |
+-----------+--------+------------+---------------------------------------------------+
| 0x20 | 4 | | number_of_packets: number of ISO packets |
+-----------+--------+------------+---------------------------------------------------+
| 0x24 | 4 | | interval: maximum time for the request on the |
| | | | server-side host controller |
+-----------+--------+------------+---------------------------------------------------+
| 0x28 | 8 | | setup: data bytes for USB setup, filled with |
| | | | zeros if not used |
+-----------+--------+------------+---------------------------------------------------+
| 0x30 | | | URB data. For ISO transfers the padding between |
| | | | each ISO packets is not transmitted. |
+-----------+--------+------------+---------------------------------------------------+
Allowed transfer_flags | value | control | interrupt | bulk | isochronous
-------------------------+------------+---------+-----------+----------+-------------
URB_SHORT_NOT_OK | 0x00000001 | only in | only in | only in | no
URB_ISO_ASAP | 0x00000002 | no | no | no | yes
URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes | yes | yes | yes
URB_ZERO_PACKET | 0x00000040 | no | no | only out | no
URB_NO_INTERRUPT | 0x00000080 | yes | yes | yes | yes
URB_FREE_BUFFER | 0x00000100 | yes | yes | yes | yes
URB_DIR_MASK | 0x00000200 | yes | yes | yes | yes
+-------------------------+------------+---------+-----------+----------+-------------+
| Allowed transfer_flags | value | control | interrupt | bulk | isochronous |
+=========================+============+=========+===========+==========+=============+
| URB_SHORT_NOT_OK | 0x00000001 | only in | only in | only in | no |
+-------------------------+------------+---------+-----------+----------+-------------+
| URB_ISO_ASAP | 0x00000002 | no | no | no | yes |
+-------------------------+------------+---------+-----------+----------+-------------+
| URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes | yes | yes | yes |
+-------------------------+------------+---------+-----------+----------+-------------+
| URB_ZERO_PACKET | 0x00000040 | no | no | only out | no |
+-------------------------+------------+---------+-----------+----------+-------------+
| URB_NO_INTERRUPT | 0x00000080 | yes | yes | yes | yes |
+-------------------------+------------+---------+-----------+----------+-------------+
| URB_FREE_BUFFER | 0x00000100 | yes | yes | yes | yes |
+-------------------------+------------+---------+-----------+----------+-------------+
| URB_DIR_MASK | 0x00000200 | yes | yes | yes | yes |
+-------------------------+------------+---------+-----------+----------+-------------+
USBIP_RET_SUBMIT: Reply for submitting an URB
USBIP_RET_SUBMIT:
Reply for submitting an URB
Offset | Length | Value | Description
-----------+--------+------------+---------------------------------------------------
0 | 4 | 0x00000003 | command
-----------+--------+------------+---------------------------------------------------
4 | 4 | | seqnum: URB sequence number
-----------+--------+------------+---------------------------------------------------
8 | 4 | | devid
-----------+--------+------------+---------------------------------------------------
0xC | 4 | | direction: 0: USBIP_DIR_OUT
| | | 1: USBIP_DIR_IN
-----------+--------+------------+---------------------------------------------------
0x10 | 4 | | ep: endpoint number
-----------+--------+------------+---------------------------------------------------
0x14 | 4 | | status: zero for successful URB transaction,
| | | otherwise some kind of error happened.
-----------+--------+------------+---------------------------------------------------
0x18 | 4 | n | actual_length: number of URB data bytes
-----------+--------+------------+---------------------------------------------------
0x1C | 4 | | start_frame: for an ISO frame the actually
| | | selected frame for transmit.
-----------+--------+------------+---------------------------------------------------
0x20 | 4 | | number_of_packets
-----------+--------+------------+---------------------------------------------------
0x24 | 4 | | error_count
-----------+--------+------------+---------------------------------------------------
0x28 | 8 | | setup: data bytes for USB setup, filled with
| | | zeros if not used
-----------+--------+------------+---------------------------------------------------
0x30 | n | | URB data bytes. For ISO transfers the padding
| | | between each ISO packets is not transmitted.
+-----------+--------+------------+---------------------------------------------------+
| Offset | Length | Value | Description |
+===========+========+============+===================================================+
| 0 | 4 | 0x00000003 | command |
+-----------+--------+------------+---------------------------------------------------+
| 4 | 4 | | seqnum: URB sequence number |
+-----------+--------+------------+---------------------------------------------------+
| 8 | 4 | | devid |
+-----------+--------+------------+---------------------------------------------------+
| 0xC | 4 | | direction: |
| | | | |
| | | | - 0: USBIP_DIR_OUT |
| | | | - 1: USBIP_DIR_IN |
+-----------+--------+------------+---------------------------------------------------+
| 0x10 | 4 | | ep: endpoint number |
+-----------+--------+------------+---------------------------------------------------+
| 0x14 | 4 | | status: zero for successful URB transaction, |
| | | | otherwise some kind of error happened. |
+-----------+--------+------------+---------------------------------------------------+
| 0x18 | 4 | n | actual_length: number of URB data bytes |
+-----------+--------+------------+---------------------------------------------------+
| 0x1C | 4 | | start_frame: for an ISO frame the actually |
| | | | selected frame for transmit. |
+-----------+--------+------------+---------------------------------------------------+
| 0x20 | 4 | | number_of_packets |
+-----------+--------+------------+---------------------------------------------------+
| 0x24 | 4 | | error_count |
+-----------+--------+------------+---------------------------------------------------+
| 0x28 | 8 | | setup: data bytes for USB setup, filled with |
| | | | zeros if not used |
+-----------+--------+------------+---------------------------------------------------+
| 0x30 | n | | URB data bytes. For ISO transfers the padding |
| | | | between each ISO packets is not transmitted. |
+-----------+--------+------------+---------------------------------------------------+
USBIP_CMD_UNLINK: Unlink an URB
USBIP_CMD_UNLINK:
Unlink an URB
Offset | Length | Value | Description
-----------+--------+------------+---------------------------------------------------
0 | 4 | 0x00000002 | command: URB unlink command
-----------+--------+------------+---------------------------------------------------
4 | 4 | | seqnum: URB sequence number to unlink: FIXME: is this so?
-----------+--------+------------+---------------------------------------------------
8 | 4 | | devid
-----------+--------+------------+---------------------------------------------------
0xC | 4 | | direction: 0: USBIP_DIR_OUT
| | | 1: USBIP_DIR_IN
-----------+--------+------------+---------------------------------------------------
0x10 | 4 | | ep: endpoint number: zero
-----------+--------+------------+---------------------------------------------------
0x14 | 4 | | seqnum: the URB sequence number given previously
| | | at USBIP_CMD_SUBMIT.seqnum field
-----------+--------+------------+---------------------------------------------------
0x30 | n | | URB data bytes. For ISO transfers the padding
| | | between each ISO packets is not transmitted.
+-----------+--------+------------+---------------------------------------------------+
| Offset | Length | Value | Description |
+===========+========+============+===================================================+
| 0 | 4 | 0x00000002 | command: URB unlink command |
+-----------+--------+------------+---------------------------------------------------+
| 4 | 4 | | seqnum: URB sequence number to unlink: |
| | | | |
| | | | FIXME: |
| | | | is this so? |
+-----------+--------+------------+---------------------------------------------------+
| 8 | 4 | | devid |
+-----------+--------+------------+---------------------------------------------------+
| 0xC | 4 | | direction: |
| | | | |
| | | | - 0: USBIP_DIR_OUT |
| | | | - 1: USBIP_DIR_IN |
+-----------+--------+------------+---------------------------------------------------+
| 0x10 | 4 | | ep: endpoint number: zero |
+-----------+--------+------------+---------------------------------------------------+
| 0x14 | 4 | | seqnum: the URB sequence number given previously |
| | | | at USBIP_CMD_SUBMIT.seqnum field |
+-----------+--------+------------+---------------------------------------------------+
| 0x30 | n | | URB data bytes. For ISO transfers the padding |
| | | | between each ISO packets is not transmitted. |
+-----------+--------+------------+---------------------------------------------------+
USBIP_RET_UNLINK: Reply for URB unlink
USBIP_RET_UNLINK:
Reply for URB unlink
Offset | Length | Value | Description
-----------+--------+------------+---------------------------------------------------
0 | 4 | 0x00000004 | command: reply for the URB unlink command
-----------+--------+------------+---------------------------------------------------
4 | 4 | | seqnum: the unlinked URB sequence number
-----------+--------+------------+---------------------------------------------------
8 | 4 | | devid
-----------+--------+------------+---------------------------------------------------
0xC | 4 | | direction: 0: USBIP_DIR_OUT
| | | 1: USBIP_DIR_IN
-----------+--------+------------+---------------------------------------------------
0x10 | 4 | | ep: endpoint number
-----------+--------+------------+---------------------------------------------------
0x14 | 4 | | status: This is the value contained in the
| | | urb->status in the URB completition handler.
| | | FIXME: a better explanation needed.
-----------+--------+------------+---------------------------------------------------
0x30 | n | | URB data bytes. For ISO transfers the padding
| | | between each ISO packets is not transmitted.
+-----------+--------+------------+---------------------------------------------------+
| Offset | Length | Value | Description |
+===========+========+============+===================================================+
| 0 | 4 | 0x00000004 | command: reply for the URB unlink command |
+-----------+--------+------------+---------------------------------------------------+
| 4 | 4 | | seqnum: the unlinked URB sequence number |
+-----------+--------+------------+---------------------------------------------------+
| 8 | 4 | | devid |
+-----------+--------+------------+---------------------------------------------------+
| 0xC | 4 | | direction: |
| | | | |
| | | | - 0: USBIP_DIR_OUT |
| | | | - 1: USBIP_DIR_IN |
+-----------+--------+------------+---------------------------------------------------+
| 0x10 | 4 | | ep: endpoint number |
+-----------+--------+------------+---------------------------------------------------+
| 0x14 | 4 | | status: This is the value contained in the |
| | | | urb->status in the URB completition handler. |
| | | | |
| | | | FIXME: |
| | | | a better explanation needed. |
+-----------+--------+------------+---------------------------------------------------+
| 0x30 | n | | URB data bytes. For ISO transfers the padding |
| | | | between each ISO packets is not transmitted. |
+-----------+--------+------------+---------------------------------------------------+

100
Documentation/usb/usbmon.txt
View File

@ -1,4 +1,9 @@
* Introduction
======
usbmon
======
Introduction
============
The name "usbmon" in lowercase refers to a facility in kernel which is
used to collect traces of I/O on the USB bus. This function is analogous
@ -16,7 +21,8 @@ Two APIs are currently implemented: "text" and "binary". The binary API
is available through a character device in /dev namespace and is an ABI.
The text API is deprecated since 2.6.35, but available for convenience.
* How to use usbmon to collect raw text traces
How to use usbmon to collect raw text traces
============================================
Unlike the packet socket, usbmon has an interface which provides traces
in a text format. This is used for two purposes. First, it serves as a
@ -26,38 +32,41 @@ are finalized. Second, humans can read it in case tools are not available.
To collect a raw text trace, execute following steps.
1. Prepare
----------
Mount debugfs (it has to be enabled in your kernel configuration), and
load the usbmon module (if built as module). The second step is skipped
if usbmon is built into the kernel.
if usbmon is built into the kernel::
# mount -t debugfs none_debugs /sys/kernel/debug
# modprobe usbmon
#
# mount -t debugfs none_debugs /sys/kernel/debug
# modprobe usbmon
#
Verify that bus sockets are present.
Verify that bus sockets are present:
# ls /sys/kernel/debug/usb/usbmon
0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
#
# ls /sys/kernel/debug/usb/usbmon
0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
#
Now you can choose to either use the socket '0u' (to capture packets on all
buses), and skip to step #3, or find the bus used by your device with step #2.
This allows to filter away annoying devices that talk continuously.
2. Find which bus connects to the desired device
------------------------------------------------
Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds
to the device. Usually you do it by looking for the vendor string. If you have
many similar devices, unplug one and compare the two
/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number.
Example:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0557 ProdID=2004 Rev= 1.00
S: Manufacturer=ATEN
S: Product=UC100KM V2.00
Example::
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0557 ProdID=2004 Rev= 1.00
S: Manufacturer=ATEN
S: Product=UC100KM V2.00
"Bus=03" means it's bus 3. Alternatively, you can look at the output from
"lsusb" and get the bus number from the appropriate line. Example:
@ -65,23 +74,28 @@ S: Product=UC100KM V2.00
Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00
3. Start 'cat'
--------------
# cat /sys/kernel/debug/usb/usbmon/3u > /tmp/1.mon.out
::
to listen on a single bus, otherwise, to listen on all buses, type:
# cat /sys/kernel/debug/usb/usbmon/3u > /tmp/1.mon.out
# cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out
to listen on a single bus, otherwise, to listen on all buses, type::
# cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out
This process will read until it is killed. Naturally, the output can be
redirected to a desirable location. This is preferred, because it is going
to be quite long.
4. Perform the desired operation on the USB bus
-----------------------------------------------
This is where you do something that creates the traffic: plug in a flash key,
copy files, control a webcam, etc.
5. Kill cat
-----------
Usually it's done with a keyboard interrupt (Control-C).
@ -89,7 +103,8 @@ At this point the output file (/tmp/1.mon.out in this example) can be saved,
sent by e-mail, or inspected with a text editor. In the last case make sure
that the file size is not excessive for your favourite editor.
* Raw text data format
Raw text data format
====================
Two formats are supported currently: the original, or '1t' format, and
the '1u' format. The '1t' format is deprecated in kernel 2.6.21. The '1u'
@ -122,10 +137,14 @@ Here is the list of words, from left to right:
- "Address" word (formerly a "pipe"). It consists of four fields, separated by
colons: URB type and direction, Bus number, Device address, Endpoint number.
Type and direction are encoded with two bytes in the following manner:
== == =============================
Ci Co Control input and output
Zi Zo Isochronous input and output
Ii Io Interrupt input and output
Bi Bo Bulk input and output
== == =============================
Bus number, Device address, and Endpoint are decimal numbers, but they may
have leading zeros, for the sake of human readers.
@ -178,24 +197,25 @@ Here is the list of words, from left to right:
Examples:
An input control transfer to get a port status.
An input control transfer to get a port status::
d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
Bulk wrapper to a storage device at address 5:
Bulk wrapper to a storage device at address 5::
dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
* Raw binary format and API
Raw binary format and API
=========================
The overall architecture of the API is about the same as the one above,
only the events are delivered in binary format. Each event is sent in
the following structure (its name is made up, so that we can refer to it):
the following structure (its name is made up, so that we can refer to it)::
struct usbmon_packet {
struct usbmon_packet {
u64 id; /* 0: URB ID - from submission to callback */
unsigned char type; /* 8: Same as text; extensible. */
unsigned char xfer_type; /* ISO (0), Intr, Control, Bulk (3) */
@ -220,7 +240,7 @@ struct usbmon_packet {
int start_frame; /* 52: For ISO */
unsigned int xfer_flags; /* 56: copy of URB's transfer_flags */
unsigned int ndesc; /* 60: Actual number of ISO descriptors */
}; /* 64 total length */
}; /* 64 total length */
These events can be received from a character device by reading with read(2),
with an ioctl(2), or by accessing the buffer with mmap. However, read(2)
@ -244,12 +264,12 @@ no events are available.
MON_IOCG_STATS, defined as _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats)
The argument is a pointer to the following structure:
The argument is a pointer to the following structure::
struct mon_bin_stats {
struct mon_bin_stats {
u32 queued;
u32 dropped;
};
};
The member "queued" refers to the number of events currently queued in the
buffer (and not to the number of events processed since the last reset).
@ -273,13 +293,13 @@ This call returns the current size of the buffer in bytes.
These calls wait for events to arrive if none were in the kernel buffer,
then return the first event. The argument is a pointer to the following
structure:
structure::
struct mon_get_arg {
struct mon_get_arg {
struct usbmon_packet *hdr;
void *data;
size_t alloc; /* Length of data (can be zero) */
};
};
Before the call, hdr, data, and alloc should be filled. Upon return, the area
pointed by hdr contains the next event structure, and the data buffer contains
@ -290,13 +310,13 @@ The MON_IOCX_GET copies 48 bytes to hdr area, MON_IOCX_GETX copies 64 bytes.
MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg)
This ioctl is primarily used when the application accesses the buffer
with mmap(2). Its argument is a pointer to the following structure:
with mmap(2). Its argument is a pointer to the following structure::
struct mon_mfetch_arg {
struct mon_mfetch_arg {
uint32_t *offvec; /* Vector of events fetched */
uint32_t nfetch; /* Number of events to fetch (out: fetched) */
uint32_t nflush; /* Number of events to flush */
};
};
The ioctl operates in 3 stages.
@ -329,7 +349,7 @@ be polled with select(2) and poll(2). But lseek(2) does not work.
The basic idea is simple:
To prepare, map the buffer by getting the current size, then using mmap(2).
Then, execute a loop similar to the one written in pseudo-code below:
Then, execute a loop similar to the one written in pseudo-code below::
struct mon_mfetch_arg fetch;
struct usbmon_packet *hdr;

13
MAINTAINERS
View File

@ -15377,6 +15377,11 @@ M: Laxman Dewangan <ldewangan@nvidia.com>
S: Supported
F: drivers/spi/spi-tegra*
TEGRA XUSB PADCTL DRIVER
M: JC Kuo <jckuo@nvidia.com>
S: Supported
F: drivers/phy/tegra/xusb*
TEHUTI ETHERNET DRIVER
M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
@ -16155,6 +16160,14 @@ L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/roles/intel-xhci-usb-role-switch.c
USB IP DRIVER FOR HISILICON KIRIN
M: Yu Chen <chenyu56@huawei.com>
M: Binghui Wang <wangbinghui@hisilicon.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
F: drivers/phy/hisilicon/phy-hi3660-usb3.c
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org

7
arch/arm/boot/dts/rk3288.dtsi
View File

@ -616,6 +616,7 @@
dr_mode = "host";
phys = <&usbphy2>;
phy-names = "usb2-phy";
snps,reset-phy-on-wake;
status = "disabled";
};
@ -904,6 +905,8 @@
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBOTG_PHY>;
reset-names = "phy-reset";
};
usbphy1: usb-phy@334 {
@ -912,6 +915,8 @@
clocks = <&cru SCLK_OTGPHY1>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBHOST0_PHY>;
reset-names = "phy-reset";
};
usbphy2: usb-phy@348 {
@ -920,6 +925,8 @@
clocks = <&cru SCLK_OTGPHY2>;
clock-names = "phyclk";
#clock-cells = <0>;
resets = <&cru SRST_USBHOST1_PHY>;
reset-names = "phy-reset";
};
};
};

7
drivers/i2c/busses/i2c-nvidia-gpu.c
View File

@ -253,6 +253,12 @@ static const struct pci_device_id gpu_i2c_ids[] = {
};
MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
static const struct property_entry ccgx_props[] = {
/* Use FW built for NVIDIA (nv) only */
PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
{ }
};
static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
{
struct i2c_client *ccgx_client;
@ -267,6 +273,7 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
sizeof(i2cd->gpu_ccgx_ucsi->type));
i2cd->gpu_ccgx_ucsi->addr = 0x8;
i2cd->gpu_ccgx_ucsi->irq = irq;
i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
if (!ccgx_client)
return -ENODEV;

22
drivers/phy/amlogic/Kconfig
View File

@ -36,3 +36,25 @@ config PHY_MESON_GXL_USB3
Enable this to support the Meson USB3 PHY and OTG detection
IP block found in Meson GXL and GXM SoCs.
If unsure, say N.
config PHY_MESON_G12A_USB2
tristate "Meson G12A USB2 PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
select GENERIC_PHY
select REGMAP_MMIO
help
Enable this to support the Meson USB2 PHYs found in Meson
G12A SoCs.
If unsure, say N.
config PHY_MESON_G12A_USB3_PCIE
tristate "Meson G12A USB3+PCIE Combo PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
select GENERIC_PHY
select REGMAP_MMIO
help
Enable this to support the Meson USB3 + PCIE Combo PHY found
in Meson G12A SoCs.
If unsure, say N.

2
drivers/phy/amlogic/Makefile
View File

@ -1,3 +1,5 @@
obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o
obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o
obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o
obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o

341
drivers/phy/amlogic/phy-meson-g12a-usb2.c 100644
View File

@ -0,0 +1,341 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Meson G12A USB2 PHY driver
*
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* Copyright (C) 2017 Amlogic, Inc. All rights reserved
* Copyright (C) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#define PHY_CTRL_R0 0x0
#define PHY_CTRL_R1 0x4
#define PHY_CTRL_R2 0x8
#define PHY_CTRL_R3 0xc
#define PHY_CTRL_R3_SQUELCH_REF GENMASK(1, 0)
#define PHY_CTRL_R3_HSDIC_REF GENMASK(3, 2)
#define PHY_CTRL_R3_DISC_THRESH GENMASK(7, 4)
#define PHY_CTRL_R4 0x10
#define PHY_CTRL_R4_CALIB_CODE_7_0 GENMASK(7, 0)
#define PHY_CTRL_R4_CALIB_CODE_15_8 GENMASK(15, 8)
#define PHY_CTRL_R4_CALIB_CODE_23_16 GENMASK(23, 16)
#define PHY_CTRL_R4_I_C2L_CAL_EN BIT(24)
#define PHY_CTRL_R4_I_C2L_CAL_RESET_N BIT(25)
#define PHY_CTRL_R4_I_C2L_CAL_DONE BIT(26)
#define PHY_CTRL_R4_TEST_BYPASS_MODE_EN BIT(27)
#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0 GENMASK(29, 28)
#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2 GENMASK(31, 30)
#define PHY_CTRL_R5 0x14
#define PHY_CTRL_R6 0x18
#define PHY_CTRL_R7 0x1c
#define PHY_CTRL_R8 0x20
#define PHY_CTRL_R9 0x24
#define PHY_CTRL_R10 0x28
#define PHY_CTRL_R11 0x2c
#define PHY_CTRL_R12 0x30
#define PHY_CTRL_R13 0x34
#define PHY_CTRL_R13_CUSTOM_PATTERN_19 GENMASK(7, 0)
#define PHY_CTRL_R13_LOAD_STAT BIT(14)
#define PHY_CTRL_R13_UPDATE_PMA_SIGNALS BIT(15)
#define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET GENMASK(20, 16)
#define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT BIT(21)
#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL BIT(22)
#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN BIT(23)
#define PHY_CTRL_R13_I_C2L_HS_EN BIT(24)
#define PHY_CTRL_R13_I_C2L_FS_EN BIT(25)
#define PHY_CTRL_R13_I_C2L_LS_EN BIT(26)
#define PHY_CTRL_R13_I_C2L_HS_OE BIT(27)
#define PHY_CTRL_R13_I_C2L_FS_OE BIT(28)
#define PHY_CTRL_R13_I_C2L_HS_RX_EN BIT(29)
#define PHY_CTRL_R13_I_C2L_FSLS_RX_EN BIT(30)
#define PHY_CTRL_R14 0x38
#define PHY_CTRL_R14_I_RDP_EN BIT(0)
#define PHY_CTRL_R14_I_RPU_SW1_EN BIT(1)
#define PHY_CTRL_R14_I_RPU_SW2_EN GENMASK(2, 3)
#define PHY_CTRL_R14_PG_RSTN BIT(4)
#define PHY_CTRL_R14_I_C2L_DATA_16_8 BIT(5)
#define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO BIT(6)
#define PHY_CTRL_R14_BYPASS_CTRL_7_0 GENMASK(15, 8)
#define PHY_CTRL_R14_BYPASS_CTRL_15_8 GENMASK(23, 16)
#define PHY_CTRL_R15 0x3c
#define PHY_CTRL_R16 0x40
#define PHY_CTRL_R16_MPLL_M GENMASK(8, 0)
#define PHY_CTRL_R16_MPLL_N GENMASK(14, 10)
#define PHY_CTRL_R16_MPLL_TDC_MODE BIT(20)
#define PHY_CTRL_R16_MPLL_SDM_EN BIT(21)
#define PHY_CTRL_R16_MPLL_LOAD BIT(22)
#define PHY_CTRL_R16_MPLL_DCO_SDM_EN BIT(23)
#define PHY_CTRL_R16_MPLL_LOCK_LONG GENMASK(25, 24)
#define PHY_CTRL_R16_MPLL_LOCK_F BIT(26)
#define PHY_CTRL_R16_MPLL_FAST_LOCK BIT(27)
#define PHY_CTRL_R16_MPLL_EN BIT(28)
#define PHY_CTRL_R16_MPLL_RESET BIT(29)
#define PHY_CTRL_R16_MPLL_LOCK BIT(30)
#define PHY_CTRL_R16_MPLL_LOCK_DIG BIT(31)
#define PHY_CTRL_R17 0x44
#define PHY_CTRL_R17_MPLL_FRAC_IN GENMASK(13, 0)
#define PHY_CTRL_R17_MPLL_FIX_EN BIT(16)
#define PHY_CTRL_R17_MPLL_LAMBDA1 GENMASK(19, 17)
#define PHY_CTRL_R17_MPLL_LAMBDA0 GENMASK(22, 20)
#define PHY_CTRL_R17_MPLL_FILTER_MODE BIT(23)
#define PHY_CTRL_R17_MPLL_FILTER_PVT2 GENMASK(27, 24)
#define PHY_CTRL_R17_MPLL_FILTER_PVT1 GENMASK(31, 28)
#define PHY_CTRL_R18 0x48
#define PHY_CTRL_R18_MPLL_LKW_SEL GENMASK(1, 0)
#define PHY_CTRL_R18_MPLL_LK_W GENMASK(5, 2)
#define PHY_CTRL_R18_MPLL_LK_S GENMASK(11, 6)
#define PHY_CTRL_R18_MPLL_DCO_M_EN BIT(12)
#define PHY_CTRL_R18_MPLL_DCO_CLK_SEL BIT(13)
#define PHY_CTRL_R18_MPLL_PFD_GAIN GENMASK(15, 14)
#define PHY_CTRL_R18_MPLL_ROU GENMASK(18, 16)
#define PHY_CTRL_R18_MPLL_DATA_SEL GENMASK(21, 19)
#define PHY_CTRL_R18_MPLL_BIAS_ADJ GENMASK(23, 22)
#define PHY_CTRL_R18_MPLL_BB_MODE GENMASK(25, 24)
#define PHY_CTRL_R18_MPLL_ALPHA GENMASK(28, 26)
#define PHY_CTRL_R18_MPLL_ADJ_LDO GENMASK(30, 29)
#define PHY_CTRL_R18_MPLL_ACG_RANGE BIT(31)
#define PHY_CTRL_R19 0x4c
#define PHY_CTRL_R20 0x50
#define PHY_CTRL_R20_USB2_IDDET_EN BIT(0)
#define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0 GENMASK(3, 1)
#define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN BIT(4)
#define PHY_CTRL_R20_USB2_AMON_EN BIT(5)
#define PHY_CTRL_R20_USB2_CAL_CODE_R5 BIT(6)
#define PHY_CTRL_R20_BYPASS_OTG_DET BIT(7)
#define PHY_CTRL_R20_USB2_DMON_EN BIT(8)
#define PHY_CTRL_R20_USB2_DMON_SEL_3_0 GENMASK(12, 9)
#define PHY_CTRL_R20_USB2_EDGE_DRV_EN BIT(13)
#define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0 GENMASK(15, 14)
#define PHY_CTRL_R20_USB2_BGR_ADJ_4_0 GENMASK(20, 16)
#define PHY_CTRL_R20_USB2_BGR_START BIT(21)
#define PHY_CTRL_R20_USB2_BGR_VREF_4_0 GENMASK(28, 24)
#define PHY_CTRL_R20_USB2_BGR_DBG_1_0 GENMASK(30, 29)
#define PHY_CTRL_R20_BYPASS_CAL_DONE_R5 BIT(31)
#define PHY_CTRL_R21 0x54
#define PHY_CTRL_R21_USB2_BGR_FORCE BIT(0)
#define PHY_CTRL_R21_USB2_CAL_ACK_EN BIT(1)
#define PHY_CTRL_R21_USB2_OTG_ACA_EN BIT(2)
#define PHY_CTRL_R21_USB2_TX_STRG_PD BIT(3)
#define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0 GENMASK(5, 4)
#define PHY_CTRL_R21_BYPASS_UTMI_CNTR GENMASK(15, 6)
#define PHY_CTRL_R21_BYPASS_UTMI_REG GENMASK(25, 20)
#define PHY_CTRL_R22 0x58
#define PHY_CTRL_R23 0x5c
#define RESET_COMPLETE_TIME 1000
#define PLL_RESET_COMPLETE_TIME 100
struct phy_meson_g12a_usb2_priv {
struct device *dev;
struct regmap *regmap;
struct clk *clk;
struct reset_control *reset;
};
static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
.reg_bits = 8,
.val_bits = 32,
.reg_stride = 4,
.max_register = PHY_CTRL_R23,
};
static int phy_meson_g12a_usb2_init(struct phy *phy)
{
struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
int ret;
ret = reset_control_reset(priv->reset);
if (ret)
return ret;
udelay(RESET_COMPLETE_TIME);
/* usb2_otg_aca_en == 0 */
regmap_update_bits(priv->regmap, PHY_CTRL_R21,
PHY_CTRL_R21_USB2_OTG_ACA_EN, 0);
/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
regmap_write(priv->regmap, PHY_CTRL_R16,
FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
PHY_CTRL_R16_MPLL_LOAD |
FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
PHY_CTRL_R16_MPLL_FAST_LOCK |
PHY_CTRL_R16_MPLL_EN |
PHY_CTRL_R16_MPLL_RESET);
regmap_write(priv->regmap, PHY_CTRL_R17,
FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN, 0) |
FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1, 7) |
FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0, 7) |
FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
regmap_write(priv->regmap, PHY_CTRL_R18,
FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
PHY_CTRL_R18_MPLL_ACG_RANGE);
udelay(PLL_RESET_COMPLETE_TIME);
/* UnReset PLL */
regmap_write(priv->regmap, PHY_CTRL_R16,
FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
PHY_CTRL_R16_MPLL_LOAD |
FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
PHY_CTRL_R16_MPLL_FAST_LOCK |
PHY_CTRL_R16_MPLL_EN);
/* PHY Tuning */
regmap_write(priv->regmap, PHY_CTRL_R20,
FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0, 4) |
PHY_CTRL_R20_USB2_OTG_VBUSDET_EN |
FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0, 15) |
PHY_CTRL_R20_USB2_EDGE_DRV_EN |
FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0, 3) |
FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0, 0) |
FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
regmap_write(priv->regmap, PHY_CTRL_R4,
FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
/* Tuning Disconnect Threshold */
regmap_write(priv->regmap, PHY_CTRL_R3,
FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF, 0) |
FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) |
FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
/* Analog Settings */
regmap_write(priv->regmap, PHY_CTRL_R14, 0);
regmap_write(priv->regmap, PHY_CTRL_R13,
PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
return 0;
}
static int phy_meson_g12a_usb2_exit(struct phy *phy)
{
struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
return reset_control_reset(priv->reset);
}
/* set_mode is not needed, mode setting is handled via the UTMI bus */
static const struct phy_ops phy_meson_g12a_usb2_ops = {
.init = phy_meson_g12a_usb2_init,
.exit = phy_meson_g12a_usb2_exit,
.owner = THIS_MODULE,
};
static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct phy_provider *phy_provider;
struct resource *res;
struct phy_meson_g12a_usb2_priv *priv;
struct phy *phy;
void __iomem *base;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = dev;
platform_set_drvdata(pdev, priv);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
priv->regmap = devm_regmap_init_mmio(dev, base,
&phy_meson_g12a_usb2_regmap_conf);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
priv->clk = devm_clk_get(dev, "xtal");
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
priv->reset = devm_reset_control_get(dev, "phy");
if (IS_ERR(priv->reset))
return PTR_ERR(priv->reset);
ret = reset_control_deassert(priv->reset);
if (ret)
return ret;
phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops);
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to create PHY\n");
return ret;
}
phy_set_bus_width(phy, 8);
phy_set_drvdata(phy, priv);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id phy_meson_g12a_usb2_of_match[] = {
{ .compatible = "amlogic,g12a-usb2-phy", },
{ },
};
MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match);
static struct platform_driver phy_meson_g12a_usb2_driver = {
.probe = phy_meson_g12a_usb2_probe,
.driver = {
.name = "phy-meson-g12a-usb2",
.of_match_table = phy_meson_g12a_usb2_of_match,
},
};
module_platform_driver(phy_meson_g12a_usb2_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_DESCRIPTION("Meson G12A USB2 PHY driver");
MODULE_LICENSE("GPL v2");

413
drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c 100644
View File

@ -0,0 +1,413 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Amlogic G12A USB3 + PCIE Combo PHY driver
*
* Copyright (C) 2017 Amlogic, Inc. All rights reserved
* Copyright (C) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/platform_device.h>
#include <dt-bindings/phy/phy.h>
#define PHY_R0 0x00
#define PHY_R0_PCIE_POWER_STATE GENMASK(4, 0)
#define PHY_R0_PCIE_USB3_SWITCH GENMASK(6, 5)
#define PHY_R1 0x04
#define PHY_R1_PHY_TX1_TERM_OFFSET GENMASK(4, 0)
#define PHY_R1_PHY_TX0_TERM_OFFSET GENMASK(9, 5)
#define PHY_R1_PHY_RX1_EQ GENMASK(12, 10)
#define PHY_R1_PHY_RX0_EQ GENMASK(15, 13)
#define PHY_R1_PHY_LOS_LEVEL GENMASK(20, 16)
#define PHY_R1_PHY_LOS_BIAS GENMASK(23, 21)
#define PHY_R1_PHY_REF_CLKDIV2 BIT(24)
#define PHY_R1_PHY_MPLL_MULTIPLIER GENMASK(31, 25)
#define PHY_R2 0x08
#define PHY_R2_PCS_TX_DEEMPH_GEN2_6DB GENMASK(5, 0)
#define PHY_R2_PCS_TX_DEEMPH_GEN2_3P5DB GENMASK(11, 6)
#define PHY_R2_PCS_TX_DEEMPH_GEN1 GENMASK(17, 12)
#define PHY_R2_PHY_TX_VBOOST_LVL GENMASK(20, 18)
#define PHY_R4 0x10
#define PHY_R4_PHY_CR_WRITE BIT(0)
#define PHY_R4_PHY_CR_READ BIT(1)
#define PHY_R4_PHY_CR_DATA_IN GENMASK(17, 2)
#define PHY_R4_PHY_CR_CAP_DATA BIT(18)
#define PHY_R4_PHY_CR_CAP_ADDR BIT(19)
#define PHY_R5 0x14
#define PHY_R5_PHY_CR_DATA_OUT GENMASK(15, 0)
#define PHY_R5_PHY_CR_ACK BIT(16)
#define PHY_R5_PHY_BS_OUT BIT(17)
struct phy_g12a_usb3_pcie_priv {
struct regmap *regmap;
struct regmap *regmap_cr;
struct clk *clk_ref;
struct reset_control *reset;
struct phy *phy;
unsigned int mode;
};
static const struct regmap_config phy_g12a_usb3_pcie_regmap_conf = {
.reg_bits = 8,
.val_bits = 32,
.reg_stride = 4,
.max_register = PHY_R5,
};
static int phy_g12a_usb3_pcie_cr_bus_addr(struct phy_g12a_usb3_pcie_priv *priv,
unsigned int addr)
{
unsigned int val, reg;
int ret;
reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, addr);
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_ADDR);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, reg);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
!(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
return 0;
}
static int phy_g12a_usb3_pcie_cr_bus_read(void *context, unsigned int addr,
unsigned int *data)
{
struct phy_g12a_usb3_pcie_priv *priv = context;
unsigned int val;
int ret;
ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, 0);
regmap_write(priv->regmap, PHY_R4, PHY_R4_PHY_CR_READ);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
*data = FIELD_GET(PHY_R5_PHY_CR_DATA_OUT, val);
regmap_write(priv->regmap, PHY_R4, 0);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
!(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
return 0;
}
static int phy_g12a_usb3_pcie_cr_bus_write(void *context, unsigned int addr,
unsigned int data)
{
struct phy_g12a_usb3_pcie_priv *priv = context;
unsigned int val, reg;
int ret;
ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
if (ret)
return ret;
reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, data);
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_DATA);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, reg);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK) == 0,
5, 1000);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_WRITE);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, reg);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK) == 0,
5, 1000);
if (ret)
return ret;
return 0;
}
static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
.reg_bits = 16,
.val_bits = 16,
.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
.max_register = 0xffff,
.fast_io = true,
};
static int phy_g12a_usb3_init(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
int data, ret;
/* Switch PHY to USB3 */
/* TODO figure out how to handle when PCIe was set in the bootloader */
regmap_update_bits(priv->regmap, PHY_R0,
PHY_R0_PCIE_USB3_SWITCH,
PHY_R0_PCIE_USB3_SWITCH);
/*
* WORKAROUND: There is SSPHY suspend bug due to
* which USB enumerates
* in HS mode instead of SS mode. Workaround it by asserting
* LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus
* mode
*/
ret = regmap_update_bits(priv->regmap_cr, 0x102d, BIT(7), BIT(7));
if (ret)
return ret;
ret = regmap_update_bits(priv->regmap_cr, 0x1010, 0xff0, 20);
if (ret)
return ret;
/*
* Fix RX Equalization setting as follows
* LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
* LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
* LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
* LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
*/
ret = regmap_read(priv->regmap_cr, 0x1006, &data);
if (ret)
return ret;
data &= ~BIT(6);
data |= BIT(7);
data &= ~(0x7 << 8);
data |= (0x3 << 8);
data |= (1 << 11);
ret = regmap_write(priv->regmap_cr, 0x1006, data);
if (ret)
return ret;
/*
* Set EQ and TX launch amplitudes as follows
* LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
* LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
* LANE0.TX_OVRD_DRV_LO.EN set to 1.
*/
ret = regmap_read(priv->regmap_cr, 0x1002, &data);
if (ret)
return ret;
data &= ~0x3f80;
data |= (0x16 << 7);
data &= ~0x7f;
data |= (0x7f | BIT(14));
ret = regmap_write(priv->regmap_cr, 0x1002, data);
if (ret)
return ret;
/* MPLL_LOOP_CTL.PROP_CNTRL = 8 */
ret = regmap_update_bits(priv->regmap_cr, 0x30, 0xf << 4, 8 << 4);
if (ret)
return ret;
regmap_update_bits(priv->regmap, PHY_R2,
PHY_R2_PHY_TX_VBOOST_LVL,
FIELD_PREP(PHY_R2_PHY_TX_VBOOST_LVL, 0x4));
regmap_update_bits(priv->regmap, PHY_R1,
PHY_R1_PHY_LOS_BIAS | PHY_R1_PHY_LOS_LEVEL,
FIELD_PREP(PHY_R1_PHY_LOS_BIAS, 4) |
FIELD_PREP(PHY_R1_PHY_LOS_LEVEL, 9));
return 0;
}
static int phy_g12a_usb3_pcie_init(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
int ret;
ret = reset_control_reset(priv->reset);
if (ret)
return ret;
if (priv->mode == PHY_TYPE_USB3)
return phy_g12a_usb3_init(phy);
/* Power UP PCIE */
/* TODO figure out when the bootloader has set USB3 mode before */
regmap_update_bits(priv->regmap, PHY_R0,
PHY_R0_PCIE_POWER_STATE,
FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
return 0;
}
static int phy_g12a_usb3_pcie_exit(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
return reset_control_reset(priv->reset);
}
static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct phy_g12a_usb3_pcie_priv *priv = dev_get_drvdata(dev);
unsigned int mode;
if (args->args_count < 1) {
dev_err(dev, "invalid number of arguments\n");
return ERR_PTR(-EINVAL);
}
mode = args->args[0];
if (mode != PHY_TYPE_USB3 && mode != PHY_TYPE_PCIE) {
dev_err(dev, "invalid phy mode select argument\n");
return ERR_PTR(-EINVAL);
}
priv->mode = mode;
return priv->phy;
}
static const struct phy_ops phy_g12a_usb3_pcie_ops = {
.init = phy_g12a_usb3_pcie_init,
.exit = phy_g12a_usb3_pcie_exit,
.owner = THIS_MODULE,
};
static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct phy_g12a_usb3_pcie_priv *priv;
struct resource *res;
struct phy_provider *phy_provider;
void __iomem *base;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
priv->regmap = devm_regmap_init_mmio(dev, base,
&phy_g12a_usb3_pcie_regmap_conf);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
priv->regmap_cr = devm_regmap_init(dev, NULL, priv,
&phy_g12a_usb3_pcie_cr_regmap_conf);
if (IS_ERR(priv->regmap_cr))
return PTR_ERR(priv->regmap_cr);
priv->clk_ref = devm_clk_get(dev, "ref_clk");
if (IS_ERR(priv->clk_ref))
return PTR_ERR(priv->clk_ref);
ret = clk_prepare_enable(priv->clk_ref);
if (ret)
goto err_disable_clk_ref;
priv->reset = devm_reset_control_array_get(dev, false, false);
if (IS_ERR(priv->reset))
return PTR_ERR(priv->reset);
priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops);
if (IS_ERR(priv->phy)) {
ret = PTR_ERR(priv->phy);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to create PHY\n");
return ret;
}
phy_set_drvdata(priv->phy, priv);
dev_set_drvdata(dev, priv);
phy_provider = devm_of_phy_provider_register(dev,
phy_g12a_usb3_pcie_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
err_disable_clk_ref:
clk_disable_unprepare(priv->clk_ref);
return ret;
}
static const struct of_device_id phy_g12a_usb3_pcie_of_match[] = {
{ .compatible = "amlogic,g12a-usb3-pcie-phy", },
{ },
};
MODULE_DEVICE_TABLE(of, phy_g12a_usb3_pcie_of_match);
static struct platform_driver phy_g12a_usb3_pcie_driver = {
.probe = phy_g12a_usb3_pcie_probe,
.driver = {
.name = "phy-g12a-usb3-pcie",
.of_match_table = phy_g12a_usb3_pcie_of_match,
},
};
module_platform_driver(phy_g12a_usb3_pcie_driver);
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_DESCRIPTION("Amlogic G12A USB3 + PCIE Combo PHY driver");
MODULE_LICENSE("GPL v2");

11
drivers/phy/amlogic/phy-meson-gxl-usb2.c
View File

@ -261,14 +261,9 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
priv->clk = devm_clk_get(dev, "phy");
if (IS_ERR(priv->clk)) {
ret = PTR_ERR(priv->clk);
if (ret == -ENOENT)
priv->clk = NULL;
else
return ret;
}
priv->clk = devm_clk_get_optional(dev, "phy");
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
if (IS_ERR(priv->reset))

11
drivers/phy/broadcom/Kconfig
View File

@ -10,6 +10,17 @@ config PHY_CYGNUS_PCIE
Enable this to support the Broadcom Cygnus PCIe PHY.
If unsure, say N.
config PHY_BCM_SR_USB
tristate "Broadcom Stingray USB PHY driver"
depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
select GENERIC_PHY
default ARCH_BCM_IPROC
help
Enable this to support the Broadcom Stingray USB PHY
driver. It supports all versions of Superspeed and
Highspeed PHYs.
If unsure, say N.
config BCM_KONA_USB2_PHY
tristate "Broadcom Kona USB2 PHY Driver"
depends on HAS_IOMEM

1
drivers/phy/broadcom/Makefile
View File

@ -11,3 +11,4 @@ obj-$(CONFIG_PHY_BRCM_USB) += phy-brcm-usb-dvr.o
phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o
obj-$(CONFIG_PHY_BCM_SR_PCIE) += phy-bcm-sr-pcie.o
obj-$(CONFIG_PHY_BCM_SR_USB) += phy-bcm-sr-usb.o

394
drivers/phy/broadcom/phy-bcm-sr-usb.c 100644
View File

@ -0,0 +1,394 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016-2018 Broadcom
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
enum bcm_usb_phy_version {
BCM_SR_USB_COMBO_PHY,
BCM_SR_USB_HS_PHY,
};
enum bcm_usb_phy_reg {
PLL_NDIV_FRAC,
PLL_NDIV_INT,
PLL_CTRL,
PHY_CTRL,
PHY_PLL_CTRL,
};
/* USB PHY registers */
static const u8 bcm_usb_combo_phy_ss[] = {
[PLL_CTRL] = 0x18,
[PHY_CTRL] = 0x14,
};
static const u8 bcm_usb_combo_phy_hs[] = {
[PLL_NDIV_FRAC] = 0x04,
[PLL_NDIV_INT] = 0x08,
[PLL_CTRL] = 0x0c,
[PHY_CTRL] = 0x10,
};
#define HSPLL_NDIV_INT_VAL 0x13
#define HSPLL_NDIV_FRAC_VAL 0x1005
static const u8 bcm_usb_hs_phy[] = {
[PLL_NDIV_FRAC] = 0x0,
[PLL_NDIV_INT] = 0x4,
[PLL_CTRL] = 0x8,
[PHY_CTRL] = 0xc,
};
enum pll_ctrl_bits {
PLL_RESETB,
SSPLL_SUSPEND_EN,
PLL_SEQ_START,
PLL_LOCK,
PLL_PDIV,
};
static const u8 u3pll_ctrl[] = {
[PLL_RESETB] = 0,
[SSPLL_SUSPEND_EN] = 1,
[PLL_SEQ_START] = 2,
[PLL_LOCK] = 3,
};
#define HSPLL_PDIV_MASK 0xF
#define HSPLL_PDIV_VAL 0x1
static const u8 u2pll_ctrl[] = {
[PLL_PDIV] = 1,
[PLL_RESETB] = 5,
[PLL_LOCK] = 6,
};
enum bcm_usb_phy_ctrl_bits {
CORERDY,
AFE_LDO_PWRDWNB,
AFE_PLL_PWRDWNB,
AFE_BG_PWRDWNB,
PHY_ISO,
PHY_RESETB,
PHY_PCTL,
};
#define PHY_PCTL_MASK 0xffff
/*
* 0x0806 of PCTL_VAL has below bits set
* BIT-8 : refclk divider 1
* BIT-3:2: device mode; mode is not effect
* BIT-1: soft reset active low
*/
#define HSPHY_PCTL_VAL 0x0806
#define SSPHY_PCTL_VAL 0x0006
static const u8 u3phy_ctrl[] = {
[PHY_RESETB] = 1,
[PHY_PCTL] = 2,
};
static const u8 u2phy_ctrl[] = {
[CORERDY] = 0,
[AFE_LDO_PWRDWNB] = 1,
[AFE_PLL_PWRDWNB] = 2,
[AFE_BG_PWRDWNB] = 3,
[PHY_ISO] = 4,
[PHY_RESETB] = 5,
[PHY_PCTL] = 6,
};
struct bcm_usb_phy_cfg {
uint32_t type;
uint32_t version;
void __iomem *regs;
struct phy *phy;
const u8 *offset;
};
#define PLL_LOCK_RETRY_COUNT 1000
enum bcm_usb_phy_type {
USB_HS_PHY,
USB_SS_PHY,
};
#define NUM_BCM_SR_USB_COMBO_PHYS 2
static inline void bcm_usb_reg32_clrbits(void __iomem *addr, uint32_t clear)
{
writel(readl(addr) & ~clear, addr);
}
static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set)
{
writel(readl(addr) | set, addr);
}
static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit)
{
int retry;
u32 rd_data;
retry = PLL_LOCK_RETRY_COUNT;
do {
rd_data = readl(addr);
if (rd_data & bit)
return 0;
udelay(1);
} while (--retry > 0);
pr_err("%s: FAIL\n", __func__);
return -ETIMEDOUT;
}
static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
{
int ret = 0;
void __iomem *regs = phy_cfg->regs;
const u8 *offset;
u32 rd_data;
offset = phy_cfg->offset;
/* Set pctl with mode and soft reset */
rd_data = readl(regs + offset[PHY_CTRL]);
rd_data &= ~(PHY_PCTL_MASK << u3phy_ctrl[PHY_PCTL]);
rd_data |= (SSPHY_PCTL_VAL << u3phy_ctrl[PHY_PCTL]);
writel(rd_data, regs + offset[PHY_CTRL]);
bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL],
BIT(u3pll_ctrl[SSPLL_SUSPEND_EN]));
bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
BIT(u3pll_ctrl[PLL_SEQ_START]));
bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
BIT(u3pll_ctrl[PLL_RESETB]));
/* Maximum timeout for PLL reset done */
msleep(30);
ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
BIT(u3pll_ctrl[PLL_LOCK]));
return ret;
}
static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
{
int ret = 0;
void __iomem *regs = phy_cfg->regs;
const u8 *offset;
u32 rd_data;
offset = phy_cfg->offset;
writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]);
writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]);
rd_data = readl(regs + offset[PLL_CTRL]);
rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]);
rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]);
writel(rd_data, regs + offset[PLL_CTRL]);
/* Set Core Ready high */
bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
BIT(u2phy_ctrl[CORERDY]));
/* Maximum timeout for Core Ready done */
msleep(30);
bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
BIT(u2pll_ctrl[PLL_RESETB]));
bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
BIT(u2phy_ctrl[PHY_RESETB]));
rd_data = readl(regs + offset[PHY_CTRL]);
rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]);
rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]);
writel(rd_data, regs + offset[PHY_CTRL]);
/* Maximum timeout for PLL reset done */
msleep(30);
ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
BIT(u2pll_ctrl[PLL_LOCK]));
return ret;
}
static int bcm_usb_phy_reset(struct phy *phy)
{
struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy);
void __iomem *regs = phy_cfg->regs;
const u8 *offset;
offset = phy_cfg->offset;
if (phy_cfg->type == USB_HS_PHY) {
bcm_usb_reg32_clrbits(regs + offset[PHY_CTRL],
BIT(u2phy_ctrl[CORERDY]));
bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
BIT(u2phy_ctrl[CORERDY]));
}
return 0;
}
static int bcm_usb_phy_init(struct phy *phy)
{
struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy);
int ret = -EINVAL;
if (phy_cfg->type == USB_SS_PHY)
ret = bcm_usb_ss_phy_init(phy_cfg);
else if (phy_cfg->type == USB_HS_PHY)
ret = bcm_usb_hs_phy_init(phy_cfg);
return ret;
}
static struct phy_ops sr_phy_ops = {
.init = bcm_usb_phy_init,
.reset = bcm_usb_phy_reset,
.owner = THIS_MODULE,
};
static struct phy *bcm_usb_phy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct bcm_usb_phy_cfg *phy_cfg;
int phy_idx;
phy_cfg = dev_get_drvdata(dev);
if (!phy_cfg)
return ERR_PTR(-EINVAL);
if (phy_cfg->version == BCM_SR_USB_COMBO_PHY) {
phy_idx = args->args[0];
if (WARN_ON(phy_idx > 1))
return ERR_PTR(-ENODEV);
return phy_cfg[phy_idx].phy;
} else
return phy_cfg->phy;
}
static int bcm_usb_phy_create(struct device *dev, struct device_node *node,
void __iomem *regs, uint32_t version)
{
struct bcm_usb_phy_cfg *phy_cfg;
int idx;
if (version == BCM_SR_USB_COMBO_PHY) {
phy_cfg = devm_kzalloc(dev, NUM_BCM_SR_USB_COMBO_PHYS *
sizeof(struct bcm_usb_phy_cfg),
GFP_KERNEL);
if (!phy_cfg)
return -ENOMEM;
for (idx = 0; idx < NUM_BCM_SR_USB_COMBO_PHYS; idx++) {
phy_cfg[idx].regs = regs;
phy_cfg[idx].version = version;
if (idx == 0) {
phy_cfg[idx].offset = bcm_usb_combo_phy_hs;
phy_cfg[idx].type = USB_HS_PHY;
} else {
phy_cfg[idx].offset = bcm_usb_combo_phy_ss;
phy_cfg[idx].type = USB_SS_PHY;
}
phy_cfg[idx].phy = devm_phy_create(dev, node,
&sr_phy_ops);
if (IS_ERR(phy_cfg[idx].phy))
return PTR_ERR(phy_cfg[idx].phy);
phy_set_drvdata(phy_cfg[idx].phy, &phy_cfg[idx]);
}
} else if (version == BCM_SR_USB_HS_PHY) {
phy_cfg = devm_kzalloc(dev, sizeof(struct bcm_usb_phy_cfg),
GFP_KERNEL);
if (!phy_cfg)
return -ENOMEM;
phy_cfg->regs = regs;
phy_cfg->version = version;
phy_cfg->offset = bcm_usb_hs_phy;
phy_cfg->type = USB_HS_PHY;
phy_cfg->phy = devm_phy_create(dev, node, &sr_phy_ops);
if (IS_ERR(phy_cfg->phy))
return PTR_ERR(phy_cfg->phy);
phy_set_drvdata(phy_cfg->phy, phy_cfg);
} else
return -ENODEV;
dev_set_drvdata(dev, phy_cfg);
return 0;
}
static const struct of_device_id bcm_usb_phy_of_match[] = {
{
.compatible = "brcm,sr-usb-combo-phy",
.data = (void *)BCM_SR_USB_COMBO_PHY,
},
{
.compatible = "brcm,sr-usb-hs-phy",
.data = (void *)BCM_SR_USB_HS_PHY,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, bcm_usb_phy_of_match);
static int bcm_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *dn = dev->of_node;
const struct of_device_id *of_id;
struct resource *res;
void __iomem *regs;
int ret;
enum bcm_usb_phy_version version;
struct phy_provider *phy_provider;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(dev, res);
if (IS_ERR(regs))
return PTR_ERR(regs);
of_id = of_match_node(bcm_usb_phy_of_match, dn);
if (of_id)
version = (enum bcm_usb_phy_version)of_id->data;
else
return -ENODEV;
ret = bcm_usb_phy_create(dev, dn, regs, version);
if (ret)
return ret;
phy_provider = devm_of_phy_provider_register(dev, bcm_usb_phy_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct platform_driver bcm_usb_phy_driver = {
.driver = {
.name = "phy-bcm-sr-usb",
.of_match_table = bcm_usb_phy_of_match,
},
.probe = bcm_usb_phy_probe,
};
module_platform_driver(bcm_usb_phy_driver);
MODULE_AUTHOR("Broadcom");
MODULE_DESCRIPTION("Broadcom stingray USB Phy driver");
MODULE_LICENSE("GPL v2");

12
drivers/phy/freescale/phy-fsl-imx8mq-usb.c
View File

@ -6,6 +6,7 @@
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#define PHY_CTRL0 0x0
#define PHY_CTRL0_REF_SSP_EN BIT(2)
@ -24,6 +25,7 @@ struct imx8mq_usb_phy {
struct phy *phy;
struct clk *clk;
void __iomem *base;
struct regulator *vbus;
};
static int imx8mq_usb_phy_init(struct phy *phy)
@ -55,6 +57,11 @@ static int imx8mq_usb_phy_init(struct phy *phy)
static int imx8mq_phy_power_on(struct phy *phy)
{
struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
int ret;
ret = regulator_enable(imx_phy->vbus);
if (ret)
return ret;
return clk_prepare_enable(imx_phy->clk);
}
@ -64,6 +71,7 @@ static int imx8mq_phy_power_off(struct phy *phy)
struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
clk_disable_unprepare(imx_phy->clk);
regulator_disable(imx_phy->vbus);
return 0;
}
@ -101,6 +109,10 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
if (IS_ERR(imx_phy->phy))
return PTR_ERR(imx_phy->phy);
imx_phy->vbus = devm_regulator_get(dev, "vbus");
if (IS_ERR(imx_phy->vbus))
return PTR_ERR(imx_phy->vbus);
phy_set_drvdata(imx_phy->phy, imx_phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);

10
drivers/phy/hisilicon/Kconfig
View File

@ -12,6 +12,16 @@ config PHY_HI6220_USB
To compile this driver as a module, choose M here.
config PHY_HI3660_USB
tristate "hi3660 USB PHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
Enable this to support the HISILICON HI3660 USB PHY.
To compile this driver as a module, choose M here.
config PHY_HISTB_COMBPHY
tristate "HiSilicon STB SoCs COMBPHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST

1
drivers/phy/hisilicon/Makefile
View File

@ -1,4 +1,5 @@
obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o

233
drivers/phy/hisilicon/phy-hi3660-usb3.c 100644
View File

@ -0,0 +1,233 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Phy provider for USB 3.0 controller on HiSilicon 3660 platform
*
* Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
* http://www.huawei.com
*
* Authors: Yu Chen <chenyu56@huawei.com>
*/
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#define PERI_CRG_CLK_EN4 0x40
#define PERI_CRG_CLK_DIS4 0x44
#define GT_CLK_USB3OTG_REF BIT(0)
#define GT_ACLK_USB3OTG BIT(1)
#define PERI_CRG_RSTEN4 0x90
#define PERI_CRG_RSTDIS4 0x94
#define IP_RST_USB3OTGPHY_POR BIT(3)
#define IP_RST_USB3OTG BIT(5)
#define PERI_CRG_ISODIS 0x148
#define USB_REFCLK_ISO_EN BIT(25)
#define PCTRL_PERI_CTRL3 0x10
#define PCTRL_PERI_CTRL3_MSK_START 16
#define USB_TCXO_EN BIT(1)
#define PCTRL_PERI_CTRL24 0x64
#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
#define USBOTG3_CTRL0 0x00
#define SC_USB3PHY_ABB_GT_EN BIT(15)
#define USBOTG3_CTRL2 0x08
#define USBOTG3CTRL2_POWERDOWN_HSP BIT(0)
#define USBOTG3CTRL2_POWERDOWN_SSP BIT(1)
#define USBOTG3_CTRL3 0x0C
#define USBOTG3_CTRL3_VBUSVLDEXT BIT(6)
#define USBOTG3_CTRL3_VBUSVLDEXTSEL BIT(5)
#define USBOTG3_CTRL4 0x10
#define USBOTG3_CTRL7 0x1c
#define REF_SSP_EN BIT(16)
/* This value config the default txtune parameter of the usb 2.0 phy */
#define HI3660_USB_DEFAULT_PHY_PARAM 0x1c466e3
struct hi3660_priv {
struct device *dev;
struct regmap *peri_crg;
struct regmap *pctrl;
struct regmap *otg_bc;
u32 eye_diagram_param;
};
static int hi3660_phy_init(struct phy *phy)
{
struct hi3660_priv *priv = phy_get_drvdata(phy);
u32 val, mask;
int ret;
/* usb refclk iso disable */
ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
if (ret)
goto out;
/* enable usb_tcxo_en */
val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
if (ret)
goto out;
/* assert phy */
val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
if (ret)
goto out;
/* enable phy ref clk */
val = SC_USB3PHY_ABB_GT_EN;
mask = val;
ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
if (ret)
goto out;
val = REF_SSP_EN;
mask = val;
ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
if (ret)
goto out;
/* exit from IDDQ mode */
mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
if (ret)
goto out;
/* delay for exit from IDDQ mode */
usleep_range(100, 120);
/* deassert phy */
val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
if (ret)
goto out;
/* delay for phy deasserted */
usleep_range(10000, 15000);
/* fake vbus valid signal */
val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
mask = val;
ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
if (ret)
goto out;
/* delay for vbus valid */
usleep_range(100, 120);
ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
priv->eye_diagram_param);
if (ret)
goto out;
return 0;
out:
dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
return ret;
}
static int hi3660_phy_exit(struct phy *phy)
{
struct hi3660_priv *priv = phy_get_drvdata(phy);
u32 val;
int ret;
/* assert phy */
val = IP_RST_USB3OTGPHY_POR;
ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
if (ret)
goto out;
/* disable usb_tcxo_en */
val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
if (ret)
goto out;
return 0;
out:
dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
return ret;
}
static struct phy_ops hi3660_phy_ops = {
.init = hi3660_phy_init,
.exit = hi3660_phy_exit,
.owner = THIS_MODULE,
};
static int hi3660_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
struct phy *phy;
struct hi3660_priv *priv;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = dev;
priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
"hisilicon,pericrg-syscon");
if (IS_ERR(priv->peri_crg)) {
dev_err(dev, "no hisilicon,pericrg-syscon\n");
return PTR_ERR(priv->peri_crg);
}
priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
"hisilicon,pctrl-syscon");
if (IS_ERR(priv->pctrl)) {
dev_err(dev, "no hisilicon,pctrl-syscon\n");
return PTR_ERR(priv->pctrl);
}
/* node of hi3660 phy is a sub-node of usb3_otg_bc */
priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
if (IS_ERR(priv->otg_bc)) {
dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
return PTR_ERR(priv->otg_bc);
}
if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
&(priv->eye_diagram_param)))
priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
if (IS_ERR(phy))
return PTR_ERR(phy);
phy_set_drvdata(phy, priv);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id hi3660_phy_of_match[] = {
{.compatible = "hisilicon,hi3660-usb-phy",},
{ }
};
MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
static struct platform_driver hi3660_phy_driver = {
.probe = hi3660_phy_probe,
.driver = {
.name = "hi3660-usb-phy",
.of_match_table = hi3660_phy_of_match,
}
};
module_platform_driver(hi3660_phy_driver);
MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");

10
drivers/phy/mediatek/Kconfig
View File

@ -13,6 +13,16 @@ config PHY_MTK_TPHY
multi-ports is first version, otherwise is second veriosn,
so you can easily distinguish them by banks layout.
config PHY_MTK_UFS
tristate "MediaTek UFS M-PHY driver"
depends on ARCH_MEDIATEK && OF
select GENERIC_PHY
help
Support for UFS M-PHY on MediaTek chipsets.
Enable this to provide vendor-specific probing,
initialization, power on and power off flow of
specified M-PHYs.
config PHY_MTK_XSPHY
tristate "MediaTek XS-PHY Driver"
depends on ARCH_MEDIATEK && OF

1
drivers/phy/mediatek/Makefile
View File

@ -4,4 +4,5 @@
#
obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o
obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o

10
drivers/phy/mediatek/phy-mtk-tphy.c
View File

@ -1103,13 +1103,9 @@ static int mtk_tphy_probe(struct platform_device *pdev)
}
/* it's deprecated, make it optional for backward compatibility */
tphy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
if (IS_ERR(tphy->u3phya_ref)) {
if (PTR_ERR(tphy->u3phya_ref) == -EPROBE_DEFER)
return -EPROBE_DEFER;
tphy->u3phya_ref = NULL;
}
tphy->u3phya_ref = devm_clk_get_optional(dev, "u3phya_ref");
if (IS_ERR(tphy->u3phya_ref))
return PTR_ERR(tphy->u3phya_ref);
tphy->src_ref_clk = U3P_REF_CLK;
tphy->src_coef = U3P_SLEW_RATE_COEF;

245
drivers/phy/mediatek/phy-mtk-ufs.c 100644
View File

@ -0,0 +1,245 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019 MediaTek Inc.
* Author: Stanley Chu <stanley.chu@mediatek.com>
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
/* mphy register and offsets */
#define MP_GLB_DIG_8C 0x008C
#define FRC_PLL_ISO_EN BIT(8)
#define PLL_ISO_EN BIT(9)
#define FRC_FRC_PWR_ON BIT(10)
#define PLL_PWR_ON BIT(11)
#define MP_LN_DIG_RX_9C 0xA09C
#define FSM_DIFZ_FRC BIT(18)
#define MP_LN_DIG_RX_AC 0xA0AC
#define FRC_RX_SQ_EN BIT(0)
#define RX_SQ_EN BIT(1)
#define MP_LN_RX_44 0xB044
#define FRC_CDR_PWR_ON BIT(17)
#define CDR_PWR_ON BIT(18)
#define FRC_CDR_ISO_EN BIT(19)
#define CDR_ISO_EN BIT(20)
struct ufs_mtk_phy {
struct device *dev;
void __iomem *mmio;
struct clk *mp_clk;
struct clk *unipro_clk;
};
static inline u32 mphy_readl(struct ufs_mtk_phy *phy, u32 reg)
{
return readl(phy->mmio + reg);
}
static inline void mphy_writel(struct ufs_mtk_phy *phy, u32 val, u32 reg)
{
writel(val, phy->mmio + reg);
}
static void mphy_set_bit(struct ufs_mtk_phy *phy, u32 reg, u32 bit)
{
u32 val;
val = mphy_readl(phy, reg);
val |= bit;
mphy_writel(phy, val, reg);
}
static void mphy_clr_bit(struct ufs_mtk_phy *phy, u32 reg, u32 bit)
{
u32 val;
val = mphy_readl(phy, reg);
val &= ~bit;
mphy_writel(phy, val, reg);
}
static struct ufs_mtk_phy *get_ufs_mtk_phy(struct phy *generic_phy)
{
return (struct ufs_mtk_phy *)phy_get_drvdata(generic_phy);
}
static int ufs_mtk_phy_clk_init(struct ufs_mtk_phy *phy)
{
struct device *dev = phy->dev;
phy->unipro_clk = devm_clk_get(dev, "unipro");
if (IS_ERR(phy->unipro_clk)) {
dev_err(dev, "failed to get clock: unipro");
return PTR_ERR(phy->unipro_clk);
}
phy->mp_clk = devm_clk_get(dev, "mp");
if (IS_ERR(phy->mp_clk)) {
dev_err(dev, "failed to get clock: mp");
return PTR_ERR(phy->mp_clk);
}
return 0;
}
static void ufs_mtk_phy_set_active(struct ufs_mtk_phy *phy)
{
/* release DA_MP_PLL_PWR_ON */
mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON);
mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
/* release DA_MP_PLL_ISO_EN */
mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN);
mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
/* release DA_MP_CDR_PWR_ON */
mphy_set_bit(phy, MP_LN_RX_44, CDR_PWR_ON);
mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON);
/* release DA_MP_CDR_ISO_EN */
mphy_clr_bit(phy, MP_LN_RX_44, CDR_ISO_EN);
mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN);
/* release DA_MP_RX0_SQ_EN */
mphy_set_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN);
mphy_clr_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
/* delay 1us to wait DIFZ stable */
udelay(1);
/* release DIFZ */
mphy_clr_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
}
static void ufs_mtk_phy_set_deep_hibern(struct ufs_mtk_phy *phy)
{
/* force DIFZ */
mphy_set_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
/* force DA_MP_RX0_SQ_EN */
mphy_set_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
mphy_clr_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN);
/* force DA_MP_CDR_ISO_EN */
mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN);
mphy_set_bit(phy, MP_LN_RX_44, CDR_ISO_EN);
/* force DA_MP_CDR_PWR_ON */
mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON);
mphy_clr_bit(phy, MP_LN_RX_44, CDR_PWR_ON);
/* force DA_MP_PLL_ISO_EN */
mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN);
/* force DA_MP_PLL_PWR_ON */
mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON);
}
static int ufs_mtk_phy_power_on(struct phy *generic_phy)
{
struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy);
int ret;
ret = clk_prepare_enable(phy->unipro_clk);
if (ret) {
dev_err(phy->dev, "unipro_clk enable failed %d\n", ret);
goto out;
}
ret = clk_prepare_enable(phy->mp_clk);
if (ret) {
dev_err(phy->dev, "mp_clk enable failed %d\n", ret);
goto out_unprepare_unipro_clk;
}
ufs_mtk_phy_set_active(phy);
return 0;
out_unprepare_unipro_clk:
clk_disable_unprepare(phy->unipro_clk);
out:
return ret;
}
static int ufs_mtk_phy_power_off(struct phy *generic_phy)
{
struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy);
ufs_mtk_phy_set_deep_hibern(phy);
clk_disable_unprepare(phy->unipro_clk);
clk_disable_unprepare(phy->mp_clk);
return 0;
}
static const struct phy_ops ufs_mtk_phy_ops = {
.power_on = ufs_mtk_phy_power_on,
.power_off = ufs_mtk_phy_power_off,
.owner = THIS_MODULE,
};
static int ufs_mtk_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct phy *generic_phy;
struct phy_provider *phy_provider;
struct resource *res;
struct ufs_mtk_phy *phy;
int ret;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
phy->mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(phy->mmio))
return PTR_ERR(phy->mmio);
phy->dev = dev;
ret = ufs_mtk_phy_clk_init(phy);
if (ret)
return ret;
generic_phy = devm_phy_create(dev, NULL, &ufs_mtk_phy_ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id ufs_mtk_phy_of_match[] = {
{.compatible = "mediatek,mt8183-ufsphy"},
{},
};
MODULE_DEVICE_TABLE(of, ufs_mtk_phy_of_match);
static struct platform_driver ufs_mtk_phy_driver = {
.probe = ufs_mtk_phy_probe,
.driver = {
.of_match_table = ufs_mtk_phy_of_match,
.name = "ufs_mtk_phy",
},
};
module_platform_driver(ufs_mtk_phy_driver);
MODULE_DESCRIPTION("Universal Flash Storage (UFS) MediaTek MPHY");
MODULE_AUTHOR("Stanley Chu <stanley.chu@mediatek.com>");
MODULE_LICENSE("GPL v2");

240
drivers/phy/mscc/phy-ocelot-serdes.c
View File

@ -31,6 +31,238 @@ struct serdes_macro {
struct serdes_ctrl *ctrl;
};
#define MCB_S6G_CFG_TIMEOUT 50
static int __serdes_write_mcb_s6g(struct regmap *regmap, u8 macro, u32 op)
{
unsigned int regval = 0;
regmap_write(regmap, HSIO_MCB_S6G_ADDR_CFG, op |
HSIO_MCB_S6G_ADDR_CFG_SERDES6G_ADDR(BIT(macro)));
return regmap_read_poll_timeout(regmap, HSIO_MCB_S6G_ADDR_CFG, regval,
(regval & op) != op, 100,
MCB_S6G_CFG_TIMEOUT * 1000);
}
static int serdes_commit_mcb_s6g(struct regmap *regmap, u8 macro)
{
return __serdes_write_mcb_s6g(regmap, macro,
HSIO_MCB_S6G_ADDR_CFG_SERDES6G_WR_ONE_SHOT);
}
static int serdes_update_mcb_s6g(struct regmap *regmap, u8 macro)
{
return __serdes_write_mcb_s6g(regmap, macro,
HSIO_MCB_S6G_ADDR_CFG_SERDES6G_RD_ONE_SHOT);
}
static int serdes_init_s6g(struct regmap *regmap, u8 serdes, int mode)
{
u32 pll_fsm_ctrl_data;
u32 ob_ena1v_mode;
u32 des_bw_ana;
u32 ob_ena_cas;
u32 if_mode;
u32 ob_lev;
u32 qrate;
int ret;
if (mode == PHY_INTERFACE_MODE_QSGMII) {
pll_fsm_ctrl_data = 120;
ob_ena1v_mode = 0;
ob_ena_cas = 0;
des_bw_ana = 5;
ob_lev = 24;
if_mode = 3;
qrate = 0;
} else {
pll_fsm_ctrl_data = 60;
ob_ena1v_mode = 1;
ob_ena_cas = 2;
des_bw_ana = 3;
ob_lev = 48;
if_mode = 1;
qrate = 1;
}
ret = serdes_update_mcb_s6g(regmap, serdes);
if (ret)
return ret;
/* Test pattern */
regmap_update_bits(regmap, HSIO_S6G_COMMON_CFG,
HSIO_S6G_COMMON_CFG_SYS_RST, 0);
regmap_update_bits(regmap, HSIO_S6G_PLL_CFG,
HSIO_S6G_PLL_CFG_PLL_FSM_ENA, 0);
regmap_update_bits(regmap, HSIO_S6G_IB_CFG,
HSIO_S6G_IB_CFG_IB_SIG_DET_ENA |
HSIO_S6G_IB_CFG_IB_REG_ENA |
HSIO_S6G_IB_CFG_IB_SAM_ENA |
HSIO_S6G_IB_CFG_IB_EQZ_ENA |
HSIO_S6G_IB_CFG_IB_CONCUR |
HSIO_S6G_IB_CFG_IB_CAL_ENA,
HSIO_S6G_IB_CFG_IB_SIG_DET_ENA |
HSIO_S6G_IB_CFG_IB_REG_ENA |
HSIO_S6G_IB_CFG_IB_SAM_ENA |
HSIO_S6G_IB_CFG_IB_EQZ_ENA |
HSIO_S6G_IB_CFG_IB_CONCUR);
regmap_update_bits(regmap, HSIO_S6G_IB_CFG1,
HSIO_S6G_IB_CFG1_IB_FRC_OFFSET |
HSIO_S6G_IB_CFG1_IB_FRC_LP |
HSIO_S6G_IB_CFG1_IB_FRC_MID |
HSIO_S6G_IB_CFG1_IB_FRC_HP |
HSIO_S6G_IB_CFG1_IB_FILT_OFFSET |
HSIO_S6G_IB_CFG1_IB_FILT_LP |
HSIO_S6G_IB_CFG1_IB_FILT_MID |
HSIO_S6G_IB_CFG1_IB_FILT_HP,
HSIO_S6G_IB_CFG1_IB_FILT_OFFSET |
HSIO_S6G_IB_CFG1_IB_FILT_HP |
HSIO_S6G_IB_CFG1_IB_FILT_LP |
HSIO_S6G_IB_CFG1_IB_FILT_MID);
regmap_update_bits(regmap, HSIO_S6G_IB_CFG2,
HSIO_S6G_IB_CFG2_IB_UREG_M,
HSIO_S6G_IB_CFG2_IB_UREG(4));
regmap_update_bits(regmap, HSIO_S6G_IB_CFG3,
HSIO_S6G_IB_CFG3_IB_INI_OFFSET_M |
HSIO_S6G_IB_CFG3_IB_INI_LP_M |
HSIO_S6G_IB_CFG3_IB_INI_MID_M |
HSIO_S6G_IB_CFG3_IB_INI_HP_M,
HSIO_S6G_IB_CFG3_IB_INI_OFFSET(31) |
HSIO_S6G_IB_CFG3_IB_INI_LP(1) |
HSIO_S6G_IB_CFG3_IB_INI_MID(31) |
HSIO_S6G_IB_CFG3_IB_INI_HP(0));
regmap_update_bits(regmap, HSIO_S6G_MISC_CFG,
HSIO_S6G_MISC_CFG_LANE_RST,
HSIO_S6G_MISC_CFG_LANE_RST);
ret = serdes_commit_mcb_s6g(regmap, serdes);
if (ret)
return ret;
/* OB + DES + IB + SER CFG */
regmap_update_bits(regmap, HSIO_S6G_OB_CFG,
HSIO_S6G_OB_CFG_OB_IDLE |
HSIO_S6G_OB_CFG_OB_ENA1V_MODE |
HSIO_S6G_OB_CFG_OB_POST0_M |
HSIO_S6G_OB_CFG_OB_PREC_M,
(ob_ena1v_mode ? HSIO_S6G_OB_CFG_OB_ENA1V_MODE : 0) |
HSIO_S6G_OB_CFG_OB_POST0(0) |
HSIO_S6G_OB_CFG_OB_PREC(0));
regmap_update_bits(regmap, HSIO_S6G_OB_CFG1,
HSIO_S6G_OB_CFG1_OB_ENA_CAS_M |
HSIO_S6G_OB_CFG1_OB_LEV_M,
HSIO_S6G_OB_CFG1_OB_LEV(ob_lev) |
HSIO_S6G_OB_CFG1_OB_ENA_CAS(ob_ena_cas));
regmap_update_bits(regmap, HSIO_S6G_DES_CFG,
HSIO_S6G_DES_CFG_DES_PHS_CTRL_M |
HSIO_S6G_DES_CFG_DES_CPMD_SEL_M |
HSIO_S6G_DES_CFG_DES_BW_ANA_M,
HSIO_S6G_DES_CFG_DES_PHS_CTRL(2) |
HSIO_S6G_DES_CFG_DES_CPMD_SEL(0) |
HSIO_S6G_DES_CFG_DES_BW_ANA(des_bw_ana));
regmap_update_bits(regmap, HSIO_S6G_IB_CFG,
HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL_M |
HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET_M,
HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET(0) |
HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL(0));
regmap_update_bits(regmap, HSIO_S6G_IB_CFG1,
HSIO_S6G_IB_CFG1_IB_TSDET_M,
HSIO_S6G_IB_CFG1_IB_TSDET(16));
regmap_update_bits(regmap, HSIO_S6G_SER_CFG,
HSIO_S6G_SER_CFG_SER_ALISEL_M |
HSIO_S6G_SER_CFG_SER_ENALI,
HSIO_S6G_SER_CFG_SER_ALISEL(0));
regmap_update_bits(regmap, HSIO_S6G_PLL_CFG,
HSIO_S6G_PLL_CFG_PLL_DIV4 |
HSIO_S6G_PLL_CFG_PLL_ENA_ROT |
HSIO_S6G_PLL_CFG_PLL_FSM_CTRL_DATA_M |
HSIO_S6G_PLL_CFG_PLL_ROT_DIR |
HSIO_S6G_PLL_CFG_PLL_ROT_FRQ,
HSIO_S6G_PLL_CFG_PLL_FSM_CTRL_DATA
(pll_fsm_ctrl_data));
regmap_update_bits(regmap, HSIO_S6G_COMMON_CFG,
HSIO_S6G_COMMON_CFG_SYS_RST |
HSIO_S6G_COMMON_CFG_ENA_LANE |
HSIO_S6G_COMMON_CFG_PWD_RX |
HSIO_S6G_COMMON_CFG_PWD_TX |
HSIO_S6G_COMMON_CFG_HRATE |
HSIO_S6G_COMMON_CFG_QRATE |
HSIO_S6G_COMMON_CFG_ENA_ELOOP |
HSIO_S6G_COMMON_CFG_ENA_FLOOP |
HSIO_S6G_COMMON_CFG_IF_MODE_M,
HSIO_S6G_COMMON_CFG_SYS_RST |
HSIO_S6G_COMMON_CFG_ENA_LANE |
(qrate ? HSIO_S6G_COMMON_CFG_QRATE : 0) |
HSIO_S6G_COMMON_CFG_IF_MODE(if_mode));
regmap_update_bits(regmap, HSIO_S6G_MISC_CFG,
HSIO_S6G_MISC_CFG_LANE_RST |
HSIO_S6G_MISC_CFG_DES_100FX_CPMD_ENA |
HSIO_S6G_MISC_CFG_RX_LPI_MODE_ENA |
HSIO_S6G_MISC_CFG_TX_LPI_MODE_ENA,
HSIO_S6G_MISC_CFG_LANE_RST |
HSIO_S6G_MISC_CFG_RX_LPI_MODE_ENA);
ret = serdes_commit_mcb_s6g(regmap, serdes);
if (ret)
return ret;
regmap_update_bits(regmap, HSIO_S6G_PLL_CFG,
HSIO_S6G_PLL_CFG_PLL_FSM_ENA,
HSIO_S6G_PLL_CFG_PLL_FSM_ENA);
ret = serdes_commit_mcb_s6g(regmap, serdes);
if (ret)
return ret;
/* Wait for PLL bringup */
msleep(20);
regmap_update_bits(regmap, HSIO_S6G_IB_CFG,
HSIO_S6G_IB_CFG_IB_CAL_ENA,
HSIO_S6G_IB_CFG_IB_CAL_ENA);
regmap_update_bits(regmap, HSIO_S6G_MISC_CFG,
HSIO_S6G_MISC_CFG_LANE_RST, 0);
ret = serdes_commit_mcb_s6g(regmap, serdes);
if (ret)
return ret;
/* Wait for calibration */
msleep(60);
regmap_update_bits(regmap, HSIO_S6G_IB_CFG,
HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET_M |
HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL_M,
HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET(0) |
HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL(7));
regmap_update_bits(regmap, HSIO_S6G_IB_CFG1,
HSIO_S6G_IB_CFG1_IB_TSDET_M,
HSIO_S6G_IB_CFG1_IB_TSDET(3));
/* IB CFG */
return 0;
}
#define MCB_S1G_CFG_TIMEOUT 50
static int __serdes_write_mcb_s1g(struct regmap *regmap, u8 macro, u32 op)
@ -110,7 +342,7 @@ struct serdes_mux {
u32 mux;
};
#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) { \
#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) { \
.idx = _idx, \
.port = _port, \
.mode = _mode, \
@ -191,8 +423,12 @@ static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode)
if (macro->idx <= SERDES1G_MAX)
return serdes_init_s1g(macro->ctrl->regs, macro->idx);
else if (macro->idx <= SERDES6G_MAX)
return serdes_init_s6g(macro->ctrl->regs,
macro->idx - (SERDES1G_MAX + 1),
ocelot_serdes_muxes[i].submode);
/* SERDES6G and PCIe not supported yet */
/* PCIe not supported yet */
return -EOPNOTSUPP;
}

11
drivers/phy/phy-core.c
View File

@ -384,10 +384,16 @@ int phy_reset(struct phy *phy)
if (!phy || !phy->ops->reset)
return 0;
ret = phy_pm_runtime_get_sync(phy);
if (ret < 0 && ret != -ENOTSUPP)
return ret;
mutex_lock(&phy->mutex);
ret = phy->ops->reset(phy);
mutex_unlock(&phy->mutex);
phy_pm_runtime_put(phy);
return ret;
}
EXPORT_SYMBOL_GPL(phy_reset);
@ -564,6 +570,11 @@ void phy_put(struct phy *phy)
if (!phy || IS_ERR(phy))
return;
mutex_lock(&phy->mutex);
if (phy->ops->release)
phy->ops->release(phy);
mutex_unlock(&phy->mutex);
module_put(phy->ops->owner);
put_device(&phy->dev);
}

222
drivers/phy/qualcomm/phy-qcom-qmp.c
View File

@ -242,6 +242,88 @@ static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
};
static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
};
static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
};
static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
};
static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
};
static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@ -897,6 +979,7 @@ struct qmp_phy {
* @init_count: phy common block initialization count
* @phy_initialized: indicate if PHY has been initialized
* @mode: current PHY mode
* @ufs_reset: optional UFS PHY reset handle
*/
struct qcom_qmp {
struct device *dev;
@ -914,6 +997,8 @@ struct qcom_qmp {
int init_count;
bool phy_initialized;
enum phy_mode mode;
struct reset_control *ufs_reset;
};
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
@ -1146,6 +1231,31 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
.no_pcs_sw_reset = true,
};
static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
.type = PHY_TYPE_PCIE,
.nlanes = 1,
.serdes_tbl = msm8998_pcie_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl),
.tx_tbl = msm8998_pcie_tx_tbl,
.tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl),
.rx_tbl = msm8998_pcie_rx_tbl,
.rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl),
.pcs_tbl = msm8998_pcie_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl),
.clk_list = msm8996_phy_clk_l,
.num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
.reset_list = ipq8074_pciephy_reset_l,
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = pciephy_regs_layout,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.mask_com_pcs_ready = PCS_READY,
};
static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@ -1314,6 +1424,7 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
return 0;
}
reset_control_assert(qmp->ufs_reset);
if (cfg->has_phy_com_ctrl) {
qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
SERDES_START | PCS_START);
@ -1335,8 +1446,7 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
return 0;
}
/* PHY Initialization */
static int qcom_qmp_phy_init(struct phy *phy)
static int qcom_qmp_phy_enable(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
@ -1351,6 +1461,33 @@ static int qcom_qmp_phy_init(struct phy *phy)
dev_vdbg(qmp->dev, "Initializing QMP phy\n");
if (cfg->no_pcs_sw_reset) {
/*
* Get UFS reset, which is delayed until now to avoid a
* circular dependency where UFS needs its PHY, but the PHY
* needs this UFS reset.
*/
if (!qmp->ufs_reset) {
qmp->ufs_reset =
devm_reset_control_get_exclusive(qmp->dev,
"ufsphy");
if (IS_ERR(qmp->ufs_reset)) {
ret = PTR_ERR(qmp->ufs_reset);
dev_err(qmp->dev,
"failed to get UFS reset: %d\n",
ret);
qmp->ufs_reset = NULL;
return ret;
}
}
ret = reset_control_assert(qmp->ufs_reset);
if (ret)
goto err_lane_rst;
}
ret = qcom_qmp_phy_com_init(qphy);
if (ret)
return ret;
@ -1383,14 +1520,9 @@ static int qcom_qmp_phy_init(struct phy *phy)
cfg->rx_tbl, cfg->rx_tbl_num);
qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
/*
* UFS PHY requires the deassert of software reset before serdes start.
* For UFS PHYs that do not have software reset control bits, defer
* starting serdes until the power on callback.
*/
if ((cfg->type == PHY_TYPE_UFS) && cfg->no_pcs_sw_reset)
goto out;
ret = reset_control_deassert(qmp->ufs_reset);
if (ret)
goto err_lane_rst;
/*
* Pull out PHY from POWER DOWN state.
@ -1403,7 +1535,9 @@ static int qcom_qmp_phy_init(struct phy *phy)
usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
/* Pull PHY out of reset state */
qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
if (!cfg->no_pcs_sw_reset)
qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
if (cfg->has_phy_dp_com_ctrl)
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
@ -1420,11 +1554,10 @@ static int qcom_qmp_phy_init(struct phy *phy)
goto err_pcs_ready;
}
qmp->phy_initialized = true;
out:
return ret;
return 0;
err_pcs_ready:
reset_control_assert(qmp->ufs_reset);
clk_disable_unprepare(qphy->pipe_clk);
err_clk_enable:
if (cfg->has_lane_rst)
@ -1435,7 +1568,7 @@ err_lane_rst:
return ret;
}
static int qcom_qmp_phy_exit(struct phy *phy)
static int qcom_qmp_phy_disable(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
@ -1463,44 +1596,6 @@ static int qcom_qmp_phy_exit(struct phy *phy)
return 0;
}
static int qcom_qmp_phy_poweron(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qmp->cfg;
void __iomem *pcs = qphy->pcs;
void __iomem *status;
unsigned int mask, val;
int ret = 0;
if (cfg->type != PHY_TYPE_UFS)
return 0;
/*
* For UFS PHY that has not software reset control, serdes start
* should only happen when UFS driver explicitly calls phy_power_on
* after it deasserts software reset.
*/
if (cfg->no_pcs_sw_reset && !qmp->phy_initialized &&
(qmp->init_count != 0)) {
/* start SerDes and Phy-Coding-Sublayer */
qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
mask = cfg->mask_pcs_ready;
ret = readl_poll_timeout(status, val, !(val & mask), 1,
PHY_INIT_COMPLETE_TIMEOUT);
if (ret) {
dev_err(qmp->dev, "phy initialization timed-out\n");
return ret;
}
qmp->phy_initialized = true;
}
return ret;
}
static int qcom_qmp_phy_set_mode(struct phy *phy,
enum phy_mode mode, int submode)
{
@ -1750,9 +1845,15 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
}
static const struct phy_ops qcom_qmp_phy_gen_ops = {
.init = qcom_qmp_phy_init,
.exit = qcom_qmp_phy_exit,
.power_on = qcom_qmp_phy_poweron,
.init = qcom_qmp_phy_enable,
.exit = qcom_qmp_phy_disable,
.set_mode = qcom_qmp_phy_set_mode,
.owner = THIS_MODULE,
};
static const struct phy_ops qcom_qmp_ufs_ops = {
.power_on = qcom_qmp_phy_enable,
.power_off = qcom_qmp_phy_disable,
.set_mode = qcom_qmp_phy_set_mode,
.owner = THIS_MODULE,
};
@ -1763,6 +1864,7 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
struct qcom_qmp *qmp = dev_get_drvdata(dev);
struct phy *generic_phy;
struct qmp_phy *qphy;
const struct phy_ops *ops = &qcom_qmp_phy_gen_ops;
char prop_name[MAX_PROP_NAME];
int ret;
@ -1849,7 +1951,10 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
}
}
generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_gen_ops);
if (qmp->cfg->type == PHY_TYPE_UFS)
ops = &qcom_qmp_ufs_ops;
generic_phy = devm_phy_create(dev, np, ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
dev_err(dev, "failed to create qphy %d\n", ret);
@ -1872,6 +1977,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,msm8996-qmp-usb3-phy",
.data = &msm8996_usb3phy_cfg,
}, {
.compatible = "qcom,msm8998-qmp-pcie-phy",
.data = &msm8998_pciephy_cfg,
}, {
.compatible = "qcom,msm8998-qmp-ufs-phy",
.data = &sdm845_ufsphy_cfg,

12
drivers/phy/qualcomm/phy-qcom-qmp.h
View File

@ -241,6 +241,7 @@
#define QSERDES_V3_RX_RX_BAND 0x110
#define QSERDES_V3_RX_RX_INTERFACE_MODE 0x11c
#define QSERDES_V3_RX_RX_MODE_00 0x164
#define QSERDES_V3_RX_RX_MODE_01 0x168
/* Only for QMP V3 PHY - PCS registers */
#define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004
@ -280,6 +281,7 @@
#define QPHY_V3_PCS_TSYNC_RSYNC_TIME 0x08c
#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK 0x0a0
#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK 0x0a4
#define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME 0x0a8
#define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK 0x0b0
#define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME 0x0b8
#define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME 0x0bc
@ -292,13 +294,23 @@
#define QPHY_V3_PCS_RX_MIN_HIBERN8_TIME 0x138
#define QPHY_V3_PCS_RX_SIGDET_CTRL1 0x13c
#define QPHY_V3_PCS_RX_SIGDET_CTRL2 0x140
#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1a8
#define QPHY_V3_PCS_OSC_DTCT_ACTIONS 0x1ac
#define QPHY_V3_PCS_SIGDET_CNTRL 0x1b0
#define QPHY_V3_PCS_TX_MID_TERM_CTRL1 0x1bc
#define QPHY_V3_PCS_MULTI_LANE_CTRL1 0x1c4
#define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8
#define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1dc
#define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1e0
#define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c
#define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
/* Only for QMP V3 PHY - PCS_MISC registers */
#define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c
#define QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2 0x2c
#define QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1 0x44
#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2 0x54
#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4 0x5c
#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5 0x60
#endif

11
drivers/phy/qualcomm/phy-qcom-qusb2.c
View File

@ -822,14 +822,9 @@ static int qusb2_phy_probe(struct platform_device *pdev)
return ret;
}
qphy->iface_clk = devm_clk_get(dev, "iface");
if (IS_ERR(qphy->iface_clk)) {
ret = PTR_ERR(qphy->iface_clk);
if (ret == -EPROBE_DEFER)
return ret;
qphy->iface_clk = NULL;
dev_dbg(dev, "failed to get iface clk, %d\n", ret);
}
qphy->iface_clk = devm_clk_get_optional(dev, "iface");
if (IS_ERR(qphy->iface_clk))
return PTR_ERR(qphy->iface_clk);
qphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0);
if (IS_ERR(qphy->phy_reset)) {

5
drivers/phy/qualcomm/phy-qcom-ufs-i.h
View File

@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@ -96,11 +97,10 @@ struct ufs_qcom_phy {
char name[UFS_QCOM_PHY_NAME_LEN];
struct ufs_qcom_phy_calibration *cached_regs;
int cached_regs_table_size;
bool is_powered_on;
bool is_started;
struct ufs_qcom_phy_specific_ops *phy_spec_ops;
enum phy_mode mode;
struct reset_control *ufs_reset;
};
/**
@ -115,6 +115,7 @@ struct ufs_qcom_phy {
* and writes to QSERDES_RX_SIGDET_CNTRL attribute
*/
struct ufs_qcom_phy_specific_ops {
int (*calibrate)(struct ufs_qcom_phy *ufs_qcom_phy, bool is_rate_B);
void (*start_serdes)(struct ufs_qcom_phy *phy);
int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);

25
drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
View File

@ -42,28 +42,6 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
}
static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
{
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
bool is_rate_B = false;
int ret;
if (phy_common->mode == PHY_MODE_UFS_HS_B)
is_rate_B = true;
ret = ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
if (!ret)
/* phy calibrated, but yet to be started */
phy_common->is_started = false;
return ret;
}
static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
{
return 0;
}
static
int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy,
enum phy_mode mode, int submode)
@ -124,8 +102,6 @@ static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
}
static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
.init = ufs_qcom_phy_qmp_14nm_init,
.exit = ufs_qcom_phy_qmp_14nm_exit,
.power_on = ufs_qcom_phy_power_on,
.power_off = ufs_qcom_phy_power_off,
.set_mode = ufs_qcom_phy_qmp_14nm_set_mode,
@ -133,6 +109,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
};
static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
.calibrate = ufs_qcom_phy_qmp_14nm_phy_calibrate,
.start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
.set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,

25
drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
View File

@ -61,28 +61,6 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
}
static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
{
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
bool is_rate_B = false;
int ret;
if (phy_common->mode == PHY_MODE_UFS_HS_B)
is_rate_B = true;
ret = ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
if (!ret)
/* phy calibrated, but yet to be started */
phy_common->is_started = false;
return ret;
}
static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
{
return 0;
}
static
int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy,
enum phy_mode mode, int submode)
@ -182,8 +160,6 @@ static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
}
static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
.init = ufs_qcom_phy_qmp_20nm_init,
.exit = ufs_qcom_phy_qmp_20nm_exit,
.power_on = ufs_qcom_phy_power_on,
.power_off = ufs_qcom_phy_power_off,
.set_mode = ufs_qcom_phy_qmp_20nm_set_mode,
@ -191,6 +167,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
};
static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
.calibrate = ufs_qcom_phy_qmp_20nm_phy_calibrate,
.start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
.set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,

57
drivers/phy/qualcomm/phy-qcom-ufs.c
View File

@ -147,6 +147,21 @@ out:
}
EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe);
static int ufs_qcom_phy_get_reset(struct ufs_qcom_phy *phy_common)
{
struct reset_control *reset;
if (phy_common->ufs_reset)
return 0;
reset = devm_reset_control_get_exclusive_by_index(phy_common->dev, 0);
if (IS_ERR(reset))
return PTR_ERR(reset);
phy_common->ufs_reset = reset;
return 0;
}
static int __ufs_qcom_phy_clk_get(struct device *dev,
const char *name, struct clk **clk_out, bool err_print)
{
@ -528,23 +543,38 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
{
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
struct device *dev = phy_common->dev;
bool is_rate_B = false;
int err;
if (phy_common->is_powered_on)
return 0;
err = ufs_qcom_phy_get_reset(phy_common);
if (err)
return err;
if (!phy_common->is_started) {
err = ufs_qcom_phy_start_serdes(phy_common);
if (err)
return err;
err = reset_control_assert(phy_common->ufs_reset);
if (err)
return err;
err = ufs_qcom_phy_is_pcs_ready(phy_common);
if (err)
return err;
if (phy_common->mode == PHY_MODE_UFS_HS_B)
is_rate_B = true;
phy_common->is_started = true;
err = phy_common->phy_spec_ops->calibrate(phy_common, is_rate_B);
if (err)
return err;
err = reset_control_deassert(phy_common->ufs_reset);
if (err) {
dev_err(dev, "Failed to assert UFS PHY reset");
return err;
}
err = ufs_qcom_phy_start_serdes(phy_common);
if (err)
return err;
err = ufs_qcom_phy_is_pcs_ready(phy_common);
if (err)
return err;
err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
if (err) {
dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
@ -587,7 +617,6 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
}
}
phy_common->is_powered_on = true;
goto out;
out_disable_ref_clk:
@ -607,9 +636,6 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
{
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
if (!phy_common->is_powered_on)
return 0;
phy_common->phy_spec_ops->power_control(phy_common, false);
if (phy_common->vddp_ref_clk.reg)
@ -620,8 +646,7 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll);
ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy);
phy_common->is_powered_on = false;
reset_control_assert(phy_common->ufs_reset);
return 0;
}
EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off);

2
drivers/phy/renesas/Kconfig
View File

@ -19,7 +19,7 @@ config PHY_RCAR_GEN3_PCIE
config PHY_RCAR_GEN3_USB2
tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
depends on ARCH_RENESAS
depends on EXTCON
depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
depends on USB_SUPPORT
select GENERIC_PHY
select USB_COMMON

130
drivers/phy/renesas/phy-rcar-gen2.c
View File

@ -4,6 +4,7 @@
*
* Copyright (C) 2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded, Inc.
* Copyright (C) 2019 Renesas Electronics Corp.
*/
#include <linux/clk.h>
@ -15,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/atomic.h>
#include <linux/of_device.h>
#define USBHS_LPSTS 0x02
#define USBHS_UGCTRL 0x80
@ -35,6 +37,8 @@
#define USBHS_UGCTRL2_USB0SEL 0x00000030
#define USBHS_UGCTRL2_USB0SEL_PCI 0x00000010
#define USBHS_UGCTRL2_USB0SEL_HS_USB 0x00000030
#define USBHS_UGCTRL2_USB0SEL_USB20 0x00000010
#define USBHS_UGCTRL2_USB0SEL_HS_USB20 0x00000020
/* USB General status register (UGSTS) */
#define USBHS_UGSTS_LOCK 0x00000100 /* From technical update */
@ -64,6 +68,11 @@ struct rcar_gen2_phy_driver {
struct rcar_gen2_channel *channels;
};
struct rcar_gen2_phy_data {
const struct phy_ops *gen2_phy_ops;
const u32 (*select_value)[PHYS_PER_CHANNEL];
};
static int rcar_gen2_phy_init(struct phy *p)
{
struct rcar_gen2_phy *phy = phy_get_drvdata(p);
@ -180,6 +189,60 @@ static int rcar_gen2_phy_power_off(struct phy *p)
return 0;
}
static int rz_g1c_phy_power_on(struct phy *p)
{
struct rcar_gen2_phy *phy = phy_get_drvdata(p);
struct rcar_gen2_phy_driver *drv = phy->channel->drv;
void __iomem *base = drv->base;
unsigned long flags;
u32 value;
spin_lock_irqsave(&drv->lock, flags);
/* Power on USBHS PHY */
value = readl(base + USBHS_UGCTRL);
value &= ~USBHS_UGCTRL_PLLRESET;
writel(value, base + USBHS_UGCTRL);
/* As per the data sheet wait 340 micro sec for power stable */
udelay(340);
if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
value = readw(base + USBHS_LPSTS);
value |= USBHS_LPSTS_SUSPM;
writew(value, base + USBHS_LPSTS);
}
spin_unlock_irqrestore(&drv->lock, flags);
return 0;
}
static int rz_g1c_phy_power_off(struct phy *p)
{
struct rcar_gen2_phy *phy = phy_get_drvdata(p);
struct rcar_gen2_phy_driver *drv = phy->channel->drv;
void __iomem *base = drv->base;
unsigned long flags;
u32 value;
spin_lock_irqsave(&drv->lock, flags);
/* Power off USBHS PHY */
if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
value = readw(base + USBHS_LPSTS);
value &= ~USBHS_LPSTS_SUSPM;
writew(value, base + USBHS_LPSTS);
}
value = readl(base + USBHS_UGCTRL);
value |= USBHS_UGCTRL_PLLRESET;
writel(value, base + USBHS_UGCTRL);
spin_unlock_irqrestore(&drv->lock, flags);
return 0;
}
static const struct phy_ops rcar_gen2_phy_ops = {
.init = rcar_gen2_phy_init,
.exit = rcar_gen2_phy_exit,
@ -188,12 +251,55 @@ static const struct phy_ops rcar_gen2_phy_ops = {
.owner = THIS_MODULE,
};
static const struct phy_ops rz_g1c_phy_ops = {
.init = rcar_gen2_phy_init,
.exit = rcar_gen2_phy_exit,
.power_on = rz_g1c_phy_power_on,
.power_off = rz_g1c_phy_power_off,
.owner = THIS_MODULE,
};
static const u32 pci_select_value[][PHYS_PER_CHANNEL] = {
[0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB },
[2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 },
};
static const u32 usb20_select_value[][PHYS_PER_CHANNEL] = {
{ USBHS_UGCTRL2_USB0SEL_USB20, USBHS_UGCTRL2_USB0SEL_HS_USB20 },
};
static const struct rcar_gen2_phy_data rcar_gen2_usb_phy_data = {
.gen2_phy_ops = &rcar_gen2_phy_ops,
.select_value = pci_select_value,
};
static const struct rcar_gen2_phy_data rz_g1c_usb_phy_data = {
.gen2_phy_ops = &rz_g1c_phy_ops,
.select_value = usb20_select_value,
};
static const struct of_device_id rcar_gen2_phy_match_table[] = {
{ .compatible = "renesas,usb-phy-r8a7790" },
{ .compatible = "renesas,usb-phy-r8a7791" },
{ .compatible = "renesas,usb-phy-r8a7794" },
{ .compatible = "renesas,rcar-gen2-usb-phy" },
{ }
{
.compatible = "renesas,usb-phy-r8a77470",
.data = &rz_g1c_usb_phy_data,
},
{
.compatible = "renesas,usb-phy-r8a7790",
.data = &rcar_gen2_usb_phy_data,
},
{
.compatible = "renesas,usb-phy-r8a7791",
.data = &rcar_gen2_usb_phy_data,
},
{
.compatible = "renesas,usb-phy-r8a7794",
.data = &rcar_gen2_usb_phy_data,
},
{
.compatible = "renesas,rcar-gen2-usb-phy",
.data = &rcar_gen2_usb_phy_data,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
@ -224,11 +330,6 @@ static const u32 select_mask[] = {
[2] = USBHS_UGCTRL2_USB2SEL,
};
static const u32 select_value[][PHYS_PER_CHANNEL] = {
[0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB },
[2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 },
};
static int rcar_gen2_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@ -238,6 +339,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
struct clk *clk;
const struct rcar_gen2_phy_data *data;
int i = 0;
if (!dev->of_node) {
@ -266,6 +368,10 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
drv->clk = clk;
drv->base = base;
data = of_device_get_match_data(dev);
if (!data)
return -EINVAL;
drv->num_channels = of_get_child_count(dev->of_node);
drv->channels = devm_kcalloc(dev, drv->num_channels,
sizeof(struct rcar_gen2_channel),
@ -294,10 +400,10 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
phy->channel = channel;
phy->number = n;
phy->select_value = select_value[channel_num][n];
phy->select_value = data->select_value[channel_num][n];
phy->phy = devm_phy_create(dev, NULL,
&rcar_gen2_phy_ops);
data->gen2_phy_ops);
if (IS_ERR(phy->phy)) {
dev_err(dev, "Failed to create PHY\n");
return PTR_ERR(phy->phy);

232
drivers/phy/renesas/phy-rcar-gen3-usb2.c
View File

@ -37,11 +37,8 @@
/* INT_ENABLE */
#define USB2_INT_ENABLE_UCOM_INTEN BIT(3)
#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2)
#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1)
#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_UCOM_INTEN | \
USB2_INT_ENABLE_USBH_INTB_EN | \
USB2_INT_ENABLE_USBH_INTA_EN)
#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) /* For EHCI */
#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) /* For OHCI */
/* USBCTR */
#define USB2_USBCTR_DIRPD BIT(2)
@ -78,10 +75,35 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
#define NUM_OF_PHYS 4
enum rcar_gen3_phy_index {
PHY_INDEX_BOTH_HC,
PHY_INDEX_OHCI,
PHY_INDEX_EHCI,
PHY_INDEX_HSUSB
};
static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = {
USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN,
USB2_INT_ENABLE_USBH_INTA_EN,
USB2_INT_ENABLE_USBH_INTB_EN,
0
};
struct rcar_gen3_phy {
struct phy *phy;
struct rcar_gen3_chan *ch;
u32 int_enable_bits;
bool initialized;
bool otg_initialized;
bool powered;
};
struct rcar_gen3_chan {
void __iomem *base;
struct device *dev; /* platform_device's device */
struct extcon_dev *extcon;
struct phy *phy;
struct rcar_gen3_phy rphys[NUM_OF_PHYS];
struct regulator *vbus;
struct work_struct work;
enum usb_dr_mode dr_mode;
@ -120,7 +142,7 @@ static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_COMMCTRL);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host);
if (host)
val &= ~USB2_COMMCTRL_OTG_PERI;
else
@ -133,7 +155,7 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_LINECTRL1);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
if (dp)
val |= USB2_LINECTRL1_DP_RPD;
@ -147,7 +169,7 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_ADPCTRL);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
if (vbus)
val |= USB2_ADPCTRL_DRVVBUS;
else
@ -249,6 +271,42 @@ static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch)
return PHY_MODE_USB_DEVICE;
}
static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch)
{
int i;
for (i = 0; i < NUM_OF_PHYS; i++) {
if (ch->rphys[i].initialized)
return true;
}
return false;
}
static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch)
{
int i;
for (i = 0; i < NUM_OF_PHYS; i++) {
if (ch->rphys[i].otg_initialized)
return false;
}
return true;
}
static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch)
{
int i;
for (i = 0; i < NUM_OF_PHYS; i++) {
if (ch->rphys[i].powered)
return false;
}
return true;
}
static ssize_t role_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@ -256,7 +314,7 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr,
bool is_b_device;
enum phy_mode cur_mode, new_mode;
if (!ch->is_otg_channel || !ch->phy->init_count)
if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
return -EIO;
if (!strncmp(buf, "host", strlen("host")))
@ -294,7 +352,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr,
{
struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
if (!ch->is_otg_channel || !ch->phy->init_count)
if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
return -EIO;
return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
@ -328,37 +386,62 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
static int rcar_gen3_phy_usb2_init(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
u32 val;
/* Initialize USB2 part */
writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
val = readl(usb2_base + USB2_INT_ENABLE);
val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits;
writel(val, usb2_base + USB2_INT_ENABLE);
writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
/* Initialize otg part */
if (channel->is_otg_channel)
rcar_gen3_init_otg(channel);
if (channel->is_otg_channel) {
if (rcar_gen3_needs_init_otg(channel))
rcar_gen3_init_otg(channel);
rphy->otg_initialized = true;
}
rphy->initialized = true;
return 0;
}
static int rcar_gen3_phy_usb2_exit(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
u32 val;
writel(0, channel->base + USB2_INT_ENABLE);
rphy->initialized = false;
if (channel->is_otg_channel)
rphy->otg_initialized = false;
val = readl(usb2_base + USB2_INT_ENABLE);
val &= ~rphy->int_enable_bits;
if (!rcar_gen3_is_any_rphy_initialized(channel))
val &= ~USB2_INT_ENABLE_UCOM_INTEN;
writel(val, usb2_base + USB2_INT_ENABLE);
return 0;
}
static int rcar_gen3_phy_usb2_power_on(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
u32 val;
int ret;
if (!rcar_gen3_are_all_rphys_power_off(channel))
return 0;
if (channel->vbus) {
ret = regulator_enable(channel->vbus);
if (ret)
@ -371,14 +454,22 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
val &= ~USB2_USBCTR_PLL_RST;
writel(val, usb2_base + USB2_USBCTR);
rphy->powered = true;
return 0;
}
static int rcar_gen3_phy_usb2_power_off(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
int ret = 0;
rphy->powered = false;
if (!rcar_gen3_are_all_rphys_power_off(channel))
return 0;
if (channel->vbus)
ret = regulator_disable(channel->vbus);
@ -393,6 +484,12 @@ static const struct phy_ops rcar_gen3_phy_usb2_ops = {
.owner = THIS_MODULE,
};
static const struct phy_ops rz_g1c_phy_usb2_ops = {
.init = rcar_gen3_phy_usb2_init,
.exit = rcar_gen3_phy_usb2_exit,
.owner = THIS_MODULE,
};
static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
{
struct rcar_gen3_chan *ch = _ch;
@ -401,7 +498,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
irqreturn_t ret = IRQ_NONE;
if (status & USB2_OBINT_BITS) {
dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status);
dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
rcar_gen3_device_recognition(ch);
ret = IRQ_HANDLED;
@ -411,11 +508,27 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
}
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{ .compatible = "renesas,usb2-phy-r8a7795" },
{ .compatible = "renesas,usb2-phy-r8a7796" },
{ .compatible = "renesas,usb2-phy-r8a77965" },
{ .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
{
.compatible = "renesas,usb2-phy-r8a77470",
.data = &rz_g1c_phy_usb2_ops,
},
{
.compatible = "renesas,usb2-phy-r8a7795",
.data = &rcar_gen3_phy_usb2_ops,
},
{
.compatible = "renesas,usb2-phy-r8a7796",
.data = &rcar_gen3_phy_usb2_ops,
},
{
.compatible = "renesas,usb2-phy-r8a77965",
.data = &rcar_gen3_phy_usb2_ops,
},
{
.compatible = "renesas,rcar-gen3-usb2-phy",
.data = &rcar_gen3_phy_usb2_ops,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
@ -425,13 +538,54 @@ static const unsigned int rcar_gen3_phy_cable[] = {
EXTCON_NONE,
};
static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
if (args->args_count == 0) /* For old version dts */
return ch->rphys[PHY_INDEX_BOTH_HC].phy;
else if (args->args_count > 1) /* Prevent invalid args count */
return ERR_PTR(-ENODEV);
if (args->args[0] >= NUM_OF_PHYS)
return ERR_PTR(-ENODEV);
return ch->rphys[args->args[0]].phy;
}
static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
{
enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN;
int i;
/*
* If one of device nodes has other dr_mode except UNKNOWN,
* this function returns UNKNOWN. To achieve backward compatibility,
* this loop starts the index as 0.
*/
for (i = 0; i < NUM_OF_PHYS; i++) {
enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i);
if (mode != USB_DR_MODE_UNKNOWN) {
if (candidate == USB_DR_MODE_UNKNOWN)
candidate = mode;
else if (candidate != mode)
return USB_DR_MODE_UNKNOWN;
}
}
return candidate;
}
static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rcar_gen3_chan *channel;
struct phy_provider *provider;
struct resource *res;
int irq, ret = 0;
const struct phy_ops *phy_usb2_ops;
int irq, ret = 0, i;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
@ -457,7 +611,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
dev_err(dev, "No irq handler (%d)\n", irq);
}
channel->dr_mode = of_usb_get_dr_mode_by_phy(dev->of_node, 0);
channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
int ret;
@ -481,11 +635,21 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
* And then, phy-core will manage runtime pm for this device.
*/
pm_runtime_enable(dev);
channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops);
if (IS_ERR(channel->phy)) {
dev_err(dev, "Failed to create USB2 PHY\n");
ret = PTR_ERR(channel->phy);
goto error;
phy_usb2_ops = of_device_get_match_data(dev);
if (!phy_usb2_ops)
return -EINVAL;
for (i = 0; i < NUM_OF_PHYS; i++) {
channel->rphys[i].phy = devm_phy_create(dev, NULL,
phy_usb2_ops);
if (IS_ERR(channel->rphys[i].phy)) {
dev_err(dev, "Failed to create USB2 PHY\n");
ret = PTR_ERR(channel->rphys[i].phy);
goto error;
}
channel->rphys[i].ch = channel;
channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i];
phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]);
}
channel->vbus = devm_regulator_get_optional(dev, "vbus");
@ -498,9 +662,9 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, channel);
phy_set_drvdata(channel->phy, channel);
channel->dev = dev;
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate);
if (IS_ERR(provider)) {
dev_err(dev, "Failed to register PHY provider\n");
ret = PTR_ERR(provider);

30
drivers/phy/rockchip/phy-rockchip-emmc.c
View File

@ -87,6 +87,7 @@ struct rockchip_emmc_phy {
unsigned int reg_offset;
struct regmap *reg_base;
struct clk *emmcclk;
unsigned int drive_impedance;
};
static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
@ -281,10 +282,10 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
{
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
/* Drive impedance: 50 Ohm */
/* Drive impedance: from DTS */
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
HIWORD_UPDATE(PHYCTRL_DR_50OHM,
HIWORD_UPDATE(rk_phy->drive_impedance,
PHYCTRL_DR_MASK,
PHYCTRL_DR_SHIFT));
@ -314,6 +315,26 @@ static const struct phy_ops ops = {
.owner = THIS_MODULE,
};
static u32 convert_drive_impedance_ohm(struct platform_device *pdev, u32 dr_ohm)
{
switch (dr_ohm) {
case 100:
return PHYCTRL_DR_100OHM;
case 66:
return PHYCTRL_DR_66OHM;
case 50:
return PHYCTRL_DR_50OHM;
case 40:
return PHYCTRL_DR_40OHM;
case 33:
return PHYCTRL_DR_33OHM;
}
dev_warn(&pdev->dev, "Invalid value %u for drive-impedance-ohm.\n",
dr_ohm);
return PHYCTRL_DR_50OHM;
}
static int rockchip_emmc_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@ -322,6 +343,7 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
struct phy_provider *phy_provider;
struct regmap *grf;
unsigned int reg_offset;
u32 val;
if (!dev->parent || !dev->parent->of_node)
return -ENODEV;
@ -344,6 +366,10 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
rk_phy->reg_offset = reg_offset;
rk_phy->reg_base = grf;
rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
generic_phy = devm_phy_create(dev, dev->of_node, &ops);
if (IS_ERR(generic_phy)) {

10
drivers/phy/socionext/phy-uniphier-usb3hs.c
View File

@ -335,13 +335,9 @@ static int uniphier_u3hsphy_probe(struct platform_device *pdev)
if (IS_ERR(priv->clk_parent))
return PTR_ERR(priv->clk_parent);
priv->clk_ext = devm_clk_get(dev, "phy-ext");
if (IS_ERR(priv->clk_ext)) {
if (PTR_ERR(priv->clk_ext) == -ENOENT)
priv->clk_ext = NULL;
else
return PTR_ERR(priv->clk_ext);
}
priv->clk_ext = devm_clk_get_optional(dev, "phy-ext");
if (IS_ERR(priv->clk_ext))
return PTR_ERR(priv->clk_ext);
priv->rst = devm_reset_control_get_shared(dev, "phy");
if (IS_ERR(priv->rst))

10
drivers/phy/socionext/phy-uniphier-usb3ss.c
View File

@ -238,13 +238,9 @@ static int uniphier_u3ssphy_probe(struct platform_device *pdev)
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
priv->clk_ext = devm_clk_get(dev, "phy-ext");
if (IS_ERR(priv->clk_ext)) {
if (PTR_ERR(priv->clk_ext) == -ENOENT)
priv->clk_ext = NULL;
else
return PTR_ERR(priv->clk_ext);
}
priv->clk_ext = devm_clk_get_optional(dev, "phy-ext");
if (IS_ERR(priv->clk_ext))
return PTR_ERR(priv->clk_ext);
priv->rst = devm_reset_control_get_shared(dev, "phy");
if (IS_ERR(priv->rst))

1
drivers/phy/tegra/Makefile
View File

@ -4,3 +4,4 @@ phy-tegra-xusb-y += xusb.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o

899
drivers/phy/tegra/xusb-tegra186.c 100644
View File

@ -0,0 +1,899 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2016-2019, NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <soc/tegra/fuse.h>
#include "xusb.h"
/* FUSE USB_CALIB registers */
#define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0)
#define HS_CURR_LEVEL_PAD_MASK 0x3f
#define HS_TERM_RANGE_ADJ_SHIFT 7
#define HS_TERM_RANGE_ADJ_MASK 0xf
#define HS_SQUELCH_SHIFT 29
#define HS_SQUELCH_MASK 0x7
#define RPD_CTRL_SHIFT 0
#define RPD_CTRL_MASK 0x1f
/* XUSB PADCTL registers */
#define XUSB_PADCTL_USB2_PAD_MUX 0x4
#define USB2_PORT_SHIFT(x) ((x) * 2)
#define USB2_PORT_MASK 0x3
#define PORT_XUSB 1
#define HSIC_PORT_SHIFT(x) ((x) + 20)
#define HSIC_PORT_MASK 0x1
#define PORT_HSIC 0
#define XUSB_PADCTL_USB2_PORT_CAP 0x8
#define XUSB_PADCTL_SS_PORT_CAP 0xc
#define PORTX_CAP_SHIFT(x) ((x) * 4)
#define PORT_CAP_MASK 0x3
#define PORT_CAP_DISABLED 0x0
#define PORT_CAP_HOST 0x1
#define PORT_CAP_DEVICE 0x2
#define PORT_CAP_OTG 0x3
#define XUSB_PADCTL_ELPG_PROGRAM 0x20
#define USB2_PORT_WAKE_INTERRUPT_ENABLE(x) BIT(x)
#define USB2_PORT_WAKEUP_EVENT(x) BIT((x) + 7)
#define SS_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 14)
#define SS_PORT_WAKEUP_EVENT(x) BIT((x) + 21)
#define USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28)
#define USB2_HSIC_PORT_WAKEUP_EVENT(x) BIT((x) + 30)
#define ALL_WAKE_EVENTS \
(USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \
USB2_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(0) | \
SS_PORT_WAKEUP_EVENT(1) | SS_PORT_WAKEUP_EVENT(2) | \
USB2_HSIC_PORT_WAKEUP_EVENT(0))
#define XUSB_PADCTL_ELPG_PROGRAM_1 0x24
#define SSPX_ELPG_CLAMP_EN(x) BIT(0 + (x) * 3)
#define SSPX_ELPG_CLAMP_EN_EARLY(x) BIT(1 + (x) * 3)
#define SSPX_ELPG_VCORE_DOWN(x) BIT(2 + (x) * 3)
#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x88 + (x) * 0x40)
#define HS_CURR_LEVEL(x) ((x) & 0x3f)
#define TERM_SEL BIT(25)
#define USB2_OTG_PD BIT(26)
#define USB2_OTG_PD2 BIT(27)
#define USB2_OTG_PD2_OVRD_EN BIT(28)
#define USB2_OTG_PD_ZI BIT(29)
#define XUSB_PADCTL_USB2_OTG_PADX_CTL1(x) (0x8c + (x) * 0x40)
#define USB2_OTG_PD_DR BIT(2)
#define TERM_RANGE_ADJ(x) (((x) & 0xf) << 3)
#define RPD_CTRL(x) (((x) & 0x1f) << 26)
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284
#define BIAS_PAD_PD BIT(11)
#define HS_SQUELCH_LEVEL(x) (((x) & 0x7) << 0)
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1 0x288
#define USB2_TRK_START_TIMER(x) (((x) & 0x7f) << 12)
#define USB2_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 19)
#define USB2_PD_TRK BIT(26)
#define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
#define HSIC_PD_TX_DATA0 BIT(1)
#define HSIC_PD_TX_STROBE BIT(3)
#define HSIC_PD_RX_DATA0 BIT(4)
#define HSIC_PD_RX_STROBE BIT(6)
#define HSIC_PD_ZI_DATA0 BIT(7)
#define HSIC_PD_ZI_STROBE BIT(9)
#define HSIC_RPD_DATA0 BIT(13)
#define HSIC_RPD_STROBE BIT(15)
#define HSIC_RPU_DATA0 BIT(16)
#define HSIC_RPU_STROBE BIT(18)
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL0 0x340
#define HSIC_TRK_START_TIMER(x) (((x) & 0x7f) << 5)
#define HSIC_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 12)
#define HSIC_PD_TRK BIT(19)
#define USB2_VBUS_ID 0x360
#define VBUS_OVERRIDE BIT(14)
#define ID_OVERRIDE(x) (((x) & 0xf) << 18)
#define ID_OVERRIDE_FLOATING ID_OVERRIDE(8)
#define ID_OVERRIDE_GROUNDED ID_OVERRIDE(0)
#define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \
{ \
.name = _name, \
.offset = _offset, \
.shift = _shift, \
.mask = _mask, \
.num_funcs = ARRAY_SIZE(tegra186_##_type##_functions), \
.funcs = tegra186_##_type##_functions, \
}
struct tegra_xusb_fuse_calibration {
u32 *hs_curr_level;
u32 hs_squelch;
u32 hs_term_range_adj;
u32 rpd_ctrl;
};
struct tegra186_xusb_padctl {
struct tegra_xusb_padctl base;
struct tegra_xusb_fuse_calibration calib;
/* UTMI bias and tracking */
struct clk *usb2_trk_clk;
unsigned int bias_pad_enable;
};
static inline struct tegra186_xusb_padctl *
to_tegra186_xusb_padctl(struct tegra_xusb_padctl *padctl)
{
return container_of(padctl, struct tegra186_xusb_padctl, base);
}
/* USB 2.0 UTMI PHY support */
static struct tegra_xusb_lane *
tegra186_usb2_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
unsigned int index)
{
struct tegra_xusb_usb2_lane *usb2;
int err;
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
if (!usb2)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&usb2->base.list);
usb2->base.soc = &pad->soc->lanes[index];
usb2->base.index = index;
usb2->base.pad = pad;
usb2->base.np = np;
err = tegra_xusb_lane_parse_dt(&usb2->base, np);
if (err < 0) {
kfree(usb2);
return ERR_PTR(err);
}
return &usb2->base;
}
static void tegra186_usb2_lane_remove(struct tegra_xusb_lane *lane)
{
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
kfree(usb2);
}
static const struct tegra_xusb_lane_ops tegra186_usb2_lane_ops = {
.probe = tegra186_usb2_lane_probe,
.remove = tegra186_usb2_lane_remove,
};
static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
{
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
struct device *dev = padctl->dev;
u32 value;
int err;
mutex_lock(&padctl->lock);
if (priv->bias_pad_enable++ > 0) {
mutex_unlock(&padctl->lock);
return;
}
err = clk_prepare_enable(priv->usb2_trk_clk);
if (err < 0)
dev_warn(dev, "failed to enable USB2 trk clock: %d\n", err);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value &= ~USB2_TRK_START_TIMER(~0);
value |= USB2_TRK_START_TIMER(0x1e);
value &= ~USB2_TRK_DONE_RESET_TIMER(~0);
value |= USB2_TRK_DONE_RESET_TIMER(0xa);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
value &= ~BIAS_PAD_PD;
value &= ~HS_SQUELCH_LEVEL(~0);
value |= HS_SQUELCH_LEVEL(priv->calib.hs_squelch);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
udelay(1);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value &= ~USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
mutex_unlock(&padctl->lock);
}
static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
{
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
u32 value;
mutex_lock(&padctl->lock);
if (WARN_ON(priv->bias_pad_enable == 0)) {
mutex_unlock(&padctl->lock);
return;
}
if (--priv->bias_pad_enable > 0) {
mutex_unlock(&padctl->lock);
return;
}
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value |= USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
clk_disable_unprepare(priv->usb2_trk_clk);
mutex_unlock(&padctl->lock);
}
static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb2_port *port;
struct device *dev = padctl->dev;
unsigned int index = lane->index;
u32 value;
if (!phy)
return;
port = tegra_xusb_find_usb2_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB2 lane %u\n", index);
return;
}
tegra186_utmi_bias_pad_power_on(padctl);
udelay(2);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value &= ~USB2_OTG_PD;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value &= ~USB2_OTG_PD_DR;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
}
static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
unsigned int index = lane->index;
u32 value;
if (!phy)
return;
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value |= USB2_OTG_PD;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value |= USB2_OTG_PD_DR;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
udelay(2);
tegra186_utmi_bias_pad_power_off(padctl);
}
static int tegra186_utmi_phy_power_on(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
struct tegra_xusb_usb2_port *port;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
u32 value;
port = tegra_xusb_find_usb2_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB2 lane %u\n", index);
return -ENODEV;
}
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
value &= ~(USB2_PORT_MASK << USB2_PORT_SHIFT(index));
value |= (PORT_XUSB << USB2_PORT_SHIFT(index));
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index));
if (port->mode == USB_DR_MODE_UNKNOWN)
value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index));
else if (port->mode == USB_DR_MODE_PERIPHERAL)
value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index));
else if (port->mode == USB_DR_MODE_HOST)
value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index));
else if (port->mode == USB_DR_MODE_OTG)
value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index));
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value &= ~USB2_OTG_PD_ZI;
value |= TERM_SEL;
value &= ~HS_CURR_LEVEL(~0);
if (usb2->hs_curr_level_offset) {
int hs_current_level;
hs_current_level = (int)priv->calib.hs_curr_level[index] +
usb2->hs_curr_level_offset;
if (hs_current_level < 0)
hs_current_level = 0;
if (hs_current_level > 0x3f)
hs_current_level = 0x3f;
value |= HS_CURR_LEVEL(hs_current_level);
} else {
value |= HS_CURR_LEVEL(priv->calib.hs_curr_level[index]);
}
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value &= ~TERM_RANGE_ADJ(~0);
value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj);
value &= ~RPD_CTRL(~0);
value |= RPD_CTRL(priv->calib.rpd_ctrl);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
/* TODO: pad power saving */
tegra_phy_xusb_utmi_pad_power_on(phy);
return 0;
}
static int tegra186_utmi_phy_power_off(struct phy *phy)
{
/* TODO: pad power saving */
tegra_phy_xusb_utmi_pad_power_down(phy);
return 0;
}
static int tegra186_utmi_phy_init(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb2_port *port;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
int err;
port = tegra_xusb_find_usb2_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB2 lane %u\n", index);
return -ENODEV;
}
if (port->supply && port->mode == USB_DR_MODE_HOST) {
err = regulator_enable(port->supply);
if (err) {
dev_err(dev, "failed to enable port %u VBUS: %d\n",
index, err);
return err;
}
}
return 0;
}
static int tegra186_utmi_phy_exit(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb2_port *port;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
int err;
port = tegra_xusb_find_usb2_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB2 lane %u\n", index);
return -ENODEV;
}
if (port->supply && port->mode == USB_DR_MODE_HOST) {
err = regulator_disable(port->supply);
if (err) {
dev_err(dev, "failed to disable port %u VBUS: %d\n",
index, err);
return err;
}
}
return 0;
}
static const struct phy_ops utmi_phy_ops = {
.init = tegra186_utmi_phy_init,
.exit = tegra186_utmi_phy_exit,
.power_on = tegra186_utmi_phy_power_on,
.power_off = tegra186_utmi_phy_power_off,
.owner = THIS_MODULE,
};
static struct tegra_xusb_pad *
tegra186_usb2_pad_probe(struct tegra_xusb_padctl *padctl,
const struct tegra_xusb_pad_soc *soc,
struct device_node *np)
{
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
struct tegra_xusb_usb2_pad *usb2;
struct tegra_xusb_pad *pad;
int err;
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
if (!usb2)
return ERR_PTR(-ENOMEM);
pad = &usb2->base;
pad->ops = &tegra186_usb2_lane_ops;
pad->soc = soc;
err = tegra_xusb_pad_init(pad, padctl, np);
if (err < 0) {
kfree(usb2);
goto out;
}
priv->usb2_trk_clk = devm_clk_get(&pad->dev, "trk");
if (IS_ERR(priv->usb2_trk_clk)) {
err = PTR_ERR(priv->usb2_trk_clk);
dev_dbg(&pad->dev, "failed to get usb2 trk clock: %d\n", err);
goto unregister;
}
err = tegra_xusb_pad_register(pad, &utmi_phy_ops);
if (err < 0)
goto unregister;
dev_set_drvdata(&pad->dev, pad);
return pad;
unregister:
device_unregister(&pad->dev);
out:
return ERR_PTR(err);
}
static void tegra186_usb2_pad_remove(struct tegra_xusb_pad *pad)
{
struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
kfree(usb2);
}
static const struct tegra_xusb_pad_ops tegra186_usb2_pad_ops = {
.probe = tegra186_usb2_pad_probe,
.remove = tegra186_usb2_pad_remove,
};
static const char * const tegra186_usb2_functions[] = {
"xusb",
};
static const struct tegra_xusb_lane_soc tegra186_usb2_lanes[] = {
TEGRA186_LANE("usb2-0", 0, 0, 0, usb2),
TEGRA186_LANE("usb2-1", 0, 0, 0, usb2),
TEGRA186_LANE("usb2-2", 0, 0, 0, usb2),
};
static const struct tegra_xusb_pad_soc tegra186_usb2_pad = {
.name = "usb2",
.num_lanes = ARRAY_SIZE(tegra186_usb2_lanes),
.lanes = tegra186_usb2_lanes,
.ops = &tegra186_usb2_pad_ops,
};
static int tegra186_usb2_port_enable(struct tegra_xusb_port *port)
{
return 0;
}
static void tegra186_usb2_port_disable(struct tegra_xusb_port *port)
{
}
static struct tegra_xusb_lane *
tegra186_usb2_port_map(struct tegra_xusb_port *port)
{
return tegra_xusb_find_lane(port->padctl, "usb2", port->index);
}
static const struct tegra_xusb_port_ops tegra186_usb2_port_ops = {
.enable = tegra186_usb2_port_enable,
.disable = tegra186_usb2_port_disable,
.map = tegra186_usb2_port_map,
};
/* SuperSpeed PHY support */
static struct tegra_xusb_lane *
tegra186_usb3_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
unsigned int index)
{
struct tegra_xusb_usb3_lane *usb3;
int err;
usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL);
if (!usb3)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&usb3->base.list);
usb3->base.soc = &pad->soc->lanes[index];
usb3->base.index = index;
usb3->base.pad = pad;
usb3->base.np = np;
err = tegra_xusb_lane_parse_dt(&usb3->base, np);
if (err < 0) {
kfree(usb3);
return ERR_PTR(err);
}
return &usb3->base;
}
static void tegra186_usb3_lane_remove(struct tegra_xusb_lane *lane)
{
struct tegra_xusb_usb3_lane *usb3 = to_usb3_lane(lane);
kfree(usb3);
}
static const struct tegra_xusb_lane_ops tegra186_usb3_lane_ops = {
.probe = tegra186_usb3_lane_probe,
.remove = tegra186_usb3_lane_remove,
};
static int tegra186_usb3_port_enable(struct tegra_xusb_port *port)
{
return 0;
}
static void tegra186_usb3_port_disable(struct tegra_xusb_port *port)
{
}
static struct tegra_xusb_lane *
tegra186_usb3_port_map(struct tegra_xusb_port *port)
{
return tegra_xusb_find_lane(port->padctl, "usb3", port->index);
}
static const struct tegra_xusb_port_ops tegra186_usb3_port_ops = {
.enable = tegra186_usb3_port_enable,
.disable = tegra186_usb3_port_disable,
.map = tegra186_usb3_port_map,
};
static int tegra186_usb3_phy_power_on(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb3_port *port;
struct tegra_xusb_usb2_port *usb2;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
u32 value;
port = tegra_xusb_find_usb3_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB3 lane %u\n", index);
return -ENODEV;
}
usb2 = tegra_xusb_find_usb2_port(padctl, port->port);
if (!usb2) {
dev_err(dev, "no companion port found for USB3 lane %u\n",
index);
return -ENODEV;
}
mutex_lock(&padctl->lock);
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CAP);
value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index));
if (usb2->mode == USB_DR_MODE_UNKNOWN)
value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index));
else if (usb2->mode == USB_DR_MODE_PERIPHERAL)
value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index));
else if (usb2->mode == USB_DR_MODE_HOST)
value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index));
else if (usb2->mode == USB_DR_MODE_OTG)
value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index));
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_CAP);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value &= ~SSPX_ELPG_VCORE_DOWN(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
usleep_range(100, 200);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value &= ~SSPX_ELPG_CLAMP_EN_EARLY(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
usleep_range(100, 200);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value &= ~SSPX_ELPG_CLAMP_EN(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
mutex_unlock(&padctl->lock);
return 0;
}
static int tegra186_usb3_phy_power_off(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb3_port *port;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
u32 value;
port = tegra_xusb_find_usb3_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB3 lane %u\n", index);
return -ENODEV;
}
mutex_lock(&padctl->lock);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value |= SSPX_ELPG_CLAMP_EN_EARLY(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
usleep_range(100, 200);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value |= SSPX_ELPG_CLAMP_EN(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
usleep_range(250, 350);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value |= SSPX_ELPG_VCORE_DOWN(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
mutex_unlock(&padctl->lock);
return 0;
}
static int tegra186_usb3_phy_init(struct phy *phy)
{
return 0;
}
static int tegra186_usb3_phy_exit(struct phy *phy)
{
return 0;
}
static const struct phy_ops usb3_phy_ops = {
.init = tegra186_usb3_phy_init,
.exit = tegra186_usb3_phy_exit,
.power_on = tegra186_usb3_phy_power_on,
.power_off = tegra186_usb3_phy_power_off,
.owner = THIS_MODULE,
};
static struct tegra_xusb_pad *
tegra186_usb3_pad_probe(struct tegra_xusb_padctl *padctl,
const struct tegra_xusb_pad_soc *soc,
struct device_node *np)
{
struct tegra_xusb_usb3_pad *usb3;
struct tegra_xusb_pad *pad;
int err;
usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL);
if (!usb3)
return ERR_PTR(-ENOMEM);
pad = &usb3->base;
pad->ops = &tegra186_usb3_lane_ops;
pad->soc = soc;
err = tegra_xusb_pad_init(pad, padctl, np);
if (err < 0) {
kfree(usb3);
goto out;
}
err = tegra_xusb_pad_register(pad, &usb3_phy_ops);
if (err < 0)
goto unregister;
dev_set_drvdata(&pad->dev, pad);
return pad;
unregister:
device_unregister(&pad->dev);
out:
return ERR_PTR(err);
}
static void tegra186_usb3_pad_remove(struct tegra_xusb_pad *pad)
{
struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
kfree(usb2);
}
static const struct tegra_xusb_pad_ops tegra186_usb3_pad_ops = {
.probe = tegra186_usb3_pad_probe,
.remove = tegra186_usb3_pad_remove,
};
static const char * const tegra186_usb3_functions[] = {
"xusb",
};
static const struct tegra_xusb_lane_soc tegra186_usb3_lanes[] = {
TEGRA186_LANE("usb3-0", 0, 0, 0, usb3),
TEGRA186_LANE("usb3-1", 0, 0, 0, usb3),
TEGRA186_LANE("usb3-2", 0, 0, 0, usb3),
};
static const struct tegra_xusb_pad_soc tegra186_usb3_pad = {
.name = "usb3",
.num_lanes = ARRAY_SIZE(tegra186_usb3_lanes),
.lanes = tegra186_usb3_lanes,
.ops = &tegra186_usb3_pad_ops,
};
static const struct tegra_xusb_pad_soc * const tegra186_pads[] = {
&tegra186_usb2_pad,
&tegra186_usb3_pad,
#if 0 /* TODO implement */
&tegra186_hsic_pad,
#endif
};
static int
tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
{
struct device *dev = padctl->base.dev;
unsigned int i, count;
u32 value, *level;
int err;
count = padctl->base.soc->ports.usb2.count;
level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
if (!level)
return -ENOMEM;
err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
if (err) {
dev_err(dev, "failed to read calibration fuse: %d\n", err);
return err;
}
dev_dbg(dev, "FUSE_USB_CALIB_0 %#x\n", value);
for (i = 0; i < count; i++)
level[i] = (value >> HS_CURR_LEVEL_PADX_SHIFT(i)) &
HS_CURR_LEVEL_PAD_MASK;
padctl->calib.hs_curr_level = level;
padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) &
HS_SQUELCH_MASK;
padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) &
HS_TERM_RANGE_ADJ_MASK;
err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
if (err) {
dev_err(dev, "failed to read calibration fuse: %d\n", err);
return err;
}
dev_dbg(dev, "FUSE_USB_CALIB_EXT_0 %#x\n", value);
padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK;
return 0;
}
static struct tegra_xusb_padctl *
tegra186_xusb_padctl_probe(struct device *dev,
const struct tegra_xusb_padctl_soc *soc)
{
struct tegra186_xusb_padctl *priv;
int err;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return ERR_PTR(-ENOMEM);
priv->base.dev = dev;
priv->base.soc = soc;
err = tegra186_xusb_read_fuse_calibration(priv);
if (err < 0)
return ERR_PTR(err);
return &priv->base;
}
static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
{
}
static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
.probe = tegra186_xusb_padctl_probe,
.remove = tegra186_xusb_padctl_remove,
};
static const char * const tegra186_xusb_padctl_supply_names[] = {
"avdd-pll-erefeut",
"avdd-usb",
"vclamp-usb",
"vddio-hsic",
};
const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
.num_pads = ARRAY_SIZE(tegra186_pads),
.pads = tegra186_pads,
.ports = {
.usb2 = {
.ops = &tegra186_usb2_port_ops,
.count = 3,
},
#if 0 /* TODO implement */
.hsic = {
.ops = &tegra186_hsic_port_ops,
.count = 1,
},
#endif
.usb3 = {
.ops = &tegra186_usb3_port_ops,
.count = 3,
},
},
.ops = &tegra186_xusb_padctl_ops,
.supply_names = tegra186_xusb_padctl_supply_names,
.num_supplies = ARRAY_SIZE(tegra186_xusb_padctl_supply_names),
};
EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>");
MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB Pad Controller driver");
MODULE_LICENSE("GPL v2");

67
drivers/phy/tegra/xusb.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2014-2015, NVIDIA CORPORATION. All rights reserved.
* Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -67,6 +67,12 @@ static const struct of_device_id tegra_xusb_padctl_of_match[] = {
.compatible = "nvidia,tegra210-xusb-padctl",
.data = &tegra210_xusb_padctl_soc,
},
#endif
#if defined(CONFIG_ARCH_TEGRA_186_SOC)
{
.compatible = "nvidia,tegra186-xusb-padctl",
.data = &tegra186_xusb_padctl_soc,
},
#endif
{ }
};
@ -313,6 +319,10 @@ static void tegra_xusb_lane_program(struct tegra_xusb_lane *lane)
const struct tegra_xusb_lane_soc *soc = lane->soc;
u32 value;
/* skip single function lanes */
if (soc->num_funcs < 2)
return;
/* choose function */
value = padctl_readl(padctl, soc->offset);
value &= ~(soc->mask << soc->shift);
@ -542,13 +552,34 @@ static void tegra_xusb_port_unregister(struct tegra_xusb_port *port)
device_unregister(&port->dev);
}
static const char *const modes[] = {
[USB_DR_MODE_UNKNOWN] = "",
[USB_DR_MODE_HOST] = "host",
[USB_DR_MODE_PERIPHERAL] = "peripheral",
[USB_DR_MODE_OTG] = "otg",
};
static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
{
struct tegra_xusb_port *port = &usb2->base;
struct device_node *np = port->dev.of_node;
const char *mode;
usb2->internal = of_property_read_bool(np, "nvidia,internal");
if (!of_property_read_string(np, "mode", &mode)) {
int err = match_string(modes, ARRAY_SIZE(modes), mode);
if (err < 0) {
dev_err(&port->dev, "invalid value %s for \"mode\"\n",
mode);
usb2->mode = USB_DR_MODE_UNKNOWN;
} else {
usb2->mode = err;
}
} else {
usb2->mode = USB_DR_MODE_HOST;
}
usb2->supply = devm_regulator_get(&port->dev, "vbus");
return PTR_ERR_OR_ZERO(usb2->supply);
}
@ -839,6 +870,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
struct tegra_xusb_padctl *padctl;
const struct of_device_id *match;
struct resource *res;
unsigned int i;
int err;
/* for backwards compatibility with old device trees */
@ -876,14 +908,38 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
goto remove;
}
padctl->supplies = devm_kcalloc(&pdev->dev, padctl->soc->num_supplies,
sizeof(*padctl->supplies), GFP_KERNEL);
if (!padctl->supplies) {
err = -ENOMEM;
goto remove;
}
for (i = 0; i < padctl->soc->num_supplies; i++)
padctl->supplies[i].supply = padctl->soc->supply_names[i];
err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies,
padctl->supplies);
if (err < 0) {
dev_err(&pdev->dev, "failed to get regulators: %d\n", err);
goto remove;
}
err = reset_control_deassert(padctl->rst);
if (err < 0)
goto remove;
err = regulator_bulk_enable(padctl->soc->num_supplies,
padctl->supplies);
if (err < 0) {
dev_err(&pdev->dev, "failed to enable supplies: %d\n", err);
goto reset;
}
err = tegra_xusb_setup_pads(padctl);
if (err < 0) {
dev_err(&pdev->dev, "failed to setup pads: %d\n", err);
goto reset;
goto power_down;
}
err = tegra_xusb_setup_ports(padctl);
@ -896,6 +952,8 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
remove_pads:
tegra_xusb_remove_pads(padctl);
power_down:
regulator_bulk_disable(padctl->soc->num_supplies, padctl->supplies);
reset:
reset_control_assert(padctl->rst);
remove:
@ -911,6 +969,11 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
tegra_xusb_remove_ports(padctl);
tegra_xusb_remove_pads(padctl);
err = regulator_bulk_disable(padctl->soc->num_supplies,
padctl->supplies);
if (err < 0)
dev_err(&pdev->dev, "failed to disable supplies: %d\n", err);
err = reset_control_assert(padctl->rst);
if (err < 0)
dev_err(&pdev->dev, "failed to assert reset: %d\n", err);

35
drivers/phy/tegra/xusb.h
View File

@ -19,6 +19,8 @@
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/usb/otg.h>
/* legacy entry points for backwards-compatibility */
int tegra_xusb_padctl_legacy_probe(struct platform_device *pdev);
int tegra_xusb_padctl_legacy_remove(struct platform_device *pdev);
@ -54,10 +56,21 @@ struct tegra_xusb_lane {
int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane,
struct device_node *np);
struct tegra_xusb_usb3_lane {
struct tegra_xusb_lane base;
};
static inline struct tegra_xusb_usb3_lane *
to_usb3_lane(struct tegra_xusb_lane *lane)
{
return container_of(lane, struct tegra_xusb_usb3_lane, base);
}
struct tegra_xusb_usb2_lane {
struct tegra_xusb_lane base;
u32 hs_curr_level_offset;
bool powered_on;
};
static inline struct tegra_xusb_usb2_lane *
@ -168,6 +181,19 @@ int tegra_xusb_pad_register(struct tegra_xusb_pad *pad,
const struct phy_ops *ops);
void tegra_xusb_pad_unregister(struct tegra_xusb_pad *pad);
struct tegra_xusb_usb3_pad {
struct tegra_xusb_pad base;
unsigned int enable;
struct mutex lock;
};
static inline struct tegra_xusb_usb3_pad *
to_usb3_pad(struct tegra_xusb_pad *pad)
{
return container_of(pad, struct tegra_xusb_usb3_pad, base);
}
struct tegra_xusb_usb2_pad {
struct tegra_xusb_pad base;
@ -271,6 +297,7 @@ struct tegra_xusb_usb2_port {
struct tegra_xusb_port base;
struct regulator *supply;
enum usb_dr_mode mode;
bool internal;
};
@ -367,6 +394,9 @@ struct tegra_xusb_padctl_soc {
} ports;
const struct tegra_xusb_padctl_ops *ops;
const char * const *supply_names;
unsigned int num_supplies;
};
struct tegra_xusb_padctl {
@ -390,6 +420,8 @@ struct tegra_xusb_padctl {
unsigned int enable;
struct clk *clk;
struct regulator_bulk_data *supplies;
};
static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value,
@ -417,5 +449,8 @@ extern const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc;
#if defined(CONFIG_ARCH_TEGRA_210_SOC)
extern const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc;
#endif
#if defined(CONFIG_ARCH_TEGRA_186_SOC)
extern const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc;
#endif
#endif /* __PHY_TEGRA_XUSB_H */

12
drivers/phy/ti/Kconfig
View File

@ -20,6 +20,18 @@ config PHY_DM816X_USB
help
Enable this for dm816x USB to work.
config PHY_AM654_SERDES
tristate "TI AM654 SERDES support"
depends on OF && ARCH_K3 || COMPILE_TEST
depends on COMMON_CLK
select GENERIC_PHY
select MULTIPLEXER
select REGMAP_MMIO
select MUX_MMIO
help
This option enables support for TI AM654 SerDes PHY used for
PCIe.
config OMAP_CONTROL_PHY
tristate "OMAP CONTROL PHY Driver"
depends on ARCH_OMAP2PLUS || COMPILE_TEST

1
drivers/phy/ti/Makefile
View File

@ -6,4 +6,5 @@ obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
obj-$(CONFIG_PHY_AM654_SERDES) += phy-am654-serdes.o
obj-$(CONFIG_PHY_TI_GMII_SEL) += phy-gmii-sel.o

658
drivers/phy/ti/phy-am654-serdes.c 100644
View File

@ -0,0 +1,658 @@
// SPDX-License-Identifier: GPL-2.0
/**
* PCIe SERDES driver for AM654x SoC
*
* Copyright (C) 2018 - 2019 Texas Instruments Incorporated - http://www.ti.com/
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
#include <dt-bindings/phy/phy.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mfd/syscon.h>
#include <linux/mux/consumer.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#define CMU_R07C 0x7c
#define COMLANE_R138 0xb38
#define VERSION 0x70
#define COMLANE_R190 0xb90
#define COMLANE_R194 0xb94
#define SERDES_CTRL 0x1fd0
#define WIZ_LANEXCTL_STS 0x1fe0
#define TX0_DISABLE_STATE 0x4
#define TX0_SLEEP_STATE 0x5
#define TX0_SNOOZE_STATE 0x6
#define TX0_ENABLE_STATE 0x7
#define RX0_DISABLE_STATE 0x4
#define RX0_SLEEP_STATE 0x5
#define RX0_SNOOZE_STATE 0x6
#define RX0_ENABLE_STATE 0x7
#define WIZ_PLL_CTRL 0x1ff4
#define PLL_DISABLE_STATE 0x4
#define PLL_SLEEP_STATE 0x5
#define PLL_SNOOZE_STATE 0x6
#define PLL_ENABLE_STATE 0x7
#define PLL_LOCK_TIME 100000 /* in microseconds */
#define SLEEP_TIME 100 /* in microseconds */
#define LANE_USB3 0x0
#define LANE_PCIE0_LANE0 0x1
#define LANE_PCIE1_LANE0 0x0
#define LANE_PCIE0_LANE1 0x1
#define SERDES_NUM_CLOCKS 3
#define AM654_SERDES_CTRL_CLKSEL_MASK GENMASK(7, 4)
#define AM654_SERDES_CTRL_CLKSEL_SHIFT 4
struct serdes_am654_clk_mux {
struct clk_hw hw;
struct regmap *regmap;
unsigned int reg;
int clk_id;
struct clk_init_data clk_data;
};
#define to_serdes_am654_clk_mux(_hw) \
container_of(_hw, struct serdes_am654_clk_mux, hw)
static struct regmap_config serdes_am654_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.fast_io = true,
};
static const struct reg_field cmu_master_cdn_o = REG_FIELD(CMU_R07C, 24, 24);
static const struct reg_field config_version = REG_FIELD(COMLANE_R138, 16, 23);
static const struct reg_field l1_master_cdn_o = REG_FIELD(COMLANE_R190, 9, 9);
static const struct reg_field cmu_ok_i_0 = REG_FIELD(COMLANE_R194, 19, 19);
static const struct reg_field por_en = REG_FIELD(SERDES_CTRL, 29, 29);
static const struct reg_field tx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 29, 31);
static const struct reg_field rx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 13, 15);
static const struct reg_field pll_enable = REG_FIELD(WIZ_PLL_CTRL, 29, 31);
static const struct reg_field pll_ok = REG_FIELD(WIZ_PLL_CTRL, 28, 28);
struct serdes_am654 {
struct regmap *regmap;
struct regmap_field *cmu_master_cdn_o;
struct regmap_field *config_version;
struct regmap_field *l1_master_cdn_o;
struct regmap_field *cmu_ok_i_0;
struct regmap_field *por_en;
struct regmap_field *tx0_enable;
struct regmap_field *rx0_enable;
struct regmap_field *pll_enable;
struct regmap_field *pll_ok;
struct device *dev;
struct mux_control *control;
bool busy;
u32 type;
struct device_node *of_node;
struct clk_onecell_data clk_data;
struct clk *clks[SERDES_NUM_CLOCKS];
};
static int serdes_am654_enable_pll(struct serdes_am654 *phy)
{
int ret;
u32 val;
ret = regmap_field_write(phy->pll_enable, PLL_ENABLE_STATE);
if (ret)
return ret;
return regmap_field_read_poll_timeout(phy->pll_ok, val, val, 1000,
PLL_LOCK_TIME);
}
static void serdes_am654_disable_pll(struct serdes_am654 *phy)
{
struct device *dev = phy->dev;
int ret;
ret = regmap_field_write(phy->pll_enable, PLL_DISABLE_STATE);
if (ret)
dev_err(dev, "Failed to disable PLL\n");
}
static int serdes_am654_enable_txrx(struct serdes_am654 *phy)
{
int ret;
/* Enable TX */
ret = regmap_field_write(phy->tx0_enable, TX0_ENABLE_STATE);
if (ret)
return ret;
/* Enable RX */
ret = regmap_field_write(phy->rx0_enable, RX0_ENABLE_STATE);
if (ret)
return ret;
return 0;
}
static int serdes_am654_disable_txrx(struct serdes_am654 *phy)
{
int ret;
/* Disable TX */
ret = regmap_field_write(phy->tx0_enable, TX0_DISABLE_STATE);
if (ret)
return ret;
/* Disable RX */
ret = regmap_field_write(phy->rx0_enable, RX0_DISABLE_STATE);
if (ret)
return ret;
return 0;
}
static int serdes_am654_power_on(struct phy *x)
{
struct serdes_am654 *phy = phy_get_drvdata(x);
struct device *dev = phy->dev;
int ret;
u32 val;
ret = serdes_am654_enable_pll(phy);
if (ret) {
dev_err(dev, "Failed to enable PLL\n");
return ret;
}
ret = serdes_am654_enable_txrx(phy);
if (ret) {
dev_err(dev, "Failed to enable TX RX\n");
return ret;
}
return regmap_field_read_poll_timeout(phy->cmu_ok_i_0, val, val,
SLEEP_TIME, PLL_LOCK_TIME);
}
static int serdes_am654_power_off(struct phy *x)
{
struct serdes_am654 *phy = phy_get_drvdata(x);
serdes_am654_disable_txrx(phy);
serdes_am654_disable_pll(phy);
return 0;
}
static int serdes_am654_init(struct phy *x)
{
struct serdes_am654 *phy = phy_get_drvdata(x);
int ret;
ret = regmap_field_write(phy->config_version, VERSION);
if (ret)
return ret;
ret = regmap_field_write(phy->cmu_master_cdn_o, 0x1);
if (ret)
return ret;
ret = regmap_field_write(phy->l1_master_cdn_o, 0x1);
if (ret)
return ret;
return 0;
}
static int serdes_am654_reset(struct phy *x)
{
struct serdes_am654 *phy = phy_get_drvdata(x);
int ret;
ret = regmap_field_write(phy->por_en, 0x1);
if (ret)
return ret;
mdelay(1);
ret = regmap_field_write(phy->por_en, 0x0);
if (ret)
return ret;
return 0;
}
static void serdes_am654_release(struct phy *x)
{
struct serdes_am654 *phy = phy_get_drvdata(x);
phy->type = PHY_NONE;
phy->busy = false;
mux_control_deselect(phy->control);
}
struct phy *serdes_am654_xlate(struct device *dev, struct of_phandle_args
*args)
{
struct serdes_am654 *am654_phy;
struct phy *phy;
int ret;
phy = of_phy_simple_xlate(dev, args);
if (IS_ERR(phy))
return phy;
am654_phy = phy_get_drvdata(phy);
if (am654_phy->busy)
return ERR_PTR(-EBUSY);
ret = mux_control_select(am654_phy->control, args->args[1]);
if (ret) {
dev_err(dev, "Failed to select SERDES Lane Function\n");
return ERR_PTR(ret);
}
am654_phy->busy = true;
am654_phy->type = args->args[0];
return phy;
}
static const struct phy_ops ops = {
.reset = serdes_am654_reset,
.init = serdes_am654_init,
.power_on = serdes_am654_power_on,
.power_off = serdes_am654_power_off,
.release = serdes_am654_release,
.owner = THIS_MODULE,
};
#define SERDES_NUM_MUX_COMBINATIONS 16
#define LICLK 0
#define EXT_REFCLK 1
#define RICLK 2
static const int
serdes_am654_mux_table[SERDES_NUM_MUX_COMBINATIONS][SERDES_NUM_CLOCKS] = {
/*
* Each combination maps to one of
* "Figure 12-1986. SerDes Reference Clock Distribution"
* in TRM.
*/
/* Parent of CMU refclk, Left output, Right output
* either of EXT_REFCLK, LICLK, RICLK
*/
{ EXT_REFCLK, EXT_REFCLK, EXT_REFCLK }, /* 0000 */
{ RICLK, EXT_REFCLK, EXT_REFCLK }, /* 0001 */
{ EXT_REFCLK, RICLK, LICLK }, /* 0010 */
{ RICLK, RICLK, EXT_REFCLK }, /* 0011 */
{ LICLK, EXT_REFCLK, EXT_REFCLK }, /* 0100 */
{ EXT_REFCLK, EXT_REFCLK, EXT_REFCLK }, /* 0101 */
{ LICLK, RICLK, LICLK }, /* 0110 */
{ EXT_REFCLK, RICLK, LICLK }, /* 0111 */
{ EXT_REFCLK, EXT_REFCLK, LICLK }, /* 1000 */
{ RICLK, EXT_REFCLK, LICLK }, /* 1001 */
{ EXT_REFCLK, RICLK, EXT_REFCLK }, /* 1010 */
{ RICLK, RICLK, EXT_REFCLK }, /* 1011 */
{ LICLK, EXT_REFCLK, LICLK }, /* 1100 */
{ EXT_REFCLK, EXT_REFCLK, LICLK }, /* 1101 */
{ LICLK, RICLK, EXT_REFCLK }, /* 1110 */
{ EXT_REFCLK, RICLK, EXT_REFCLK }, /* 1111 */
};
static u8 serdes_am654_clk_mux_get_parent(struct clk_hw *hw)
{
struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw);
struct regmap *regmap = mux->regmap;
unsigned int reg = mux->reg;
unsigned int val;
regmap_read(regmap, reg, &val);
val &= AM654_SERDES_CTRL_CLKSEL_MASK;
val >>= AM654_SERDES_CTRL_CLKSEL_SHIFT;
return serdes_am654_mux_table[val][mux->clk_id];
}
static int serdes_am654_clk_mux_set_parent(struct clk_hw *hw, u8 index)
{
struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw);
struct regmap *regmap = mux->regmap;
unsigned int reg = mux->reg;
int clk_id = mux->clk_id;
int parents[SERDES_NUM_CLOCKS];
const int *p;
u32 val;
int found, i;
int ret;
/* get existing setting */
regmap_read(regmap, reg, &val);
val &= AM654_SERDES_CTRL_CLKSEL_MASK;
val >>= AM654_SERDES_CTRL_CLKSEL_SHIFT;
for (i = 0; i < SERDES_NUM_CLOCKS; i++)
parents[i] = serdes_am654_mux_table[val][i];
/* change parent of this clock. others left intact */
parents[clk_id] = index;
/* Find the match */
for (val = 0; val < SERDES_NUM_MUX_COMBINATIONS; val++) {
p = serdes_am654_mux_table[val];
found = 1;
for (i = 0; i < SERDES_NUM_CLOCKS; i++) {
if (parents[i] != p[i]) {
found = 0;
break;
}
}
if (found)
break;
}
if (!found) {
/*
* This can never happen, unless we missed
* a valid combination in serdes_am654_mux_table.
*/
WARN(1, "Failed to find the parent of %s clock\n",
hw->init->name);
return -EINVAL;
}
val <<= AM654_SERDES_CTRL_CLKSEL_SHIFT;
ret = regmap_update_bits(regmap, reg, AM654_SERDES_CTRL_CLKSEL_MASK,
val);
return ret;
}
static const struct clk_ops serdes_am654_clk_mux_ops = {
.set_parent = serdes_am654_clk_mux_set_parent,
.get_parent = serdes_am654_clk_mux_get_parent,
};
static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
const char *clock_name, int clock_num)
{
struct device_node *node = am654_phy->of_node;
struct device *dev = am654_phy->dev;
struct serdes_am654_clk_mux *mux;
struct device_node *regmap_node;
const char **parent_names;
struct clk_init_data *init;
unsigned int num_parents;
struct regmap *regmap;
const __be32 *addr;
unsigned int reg;
struct clk *clk;
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
return -ENOMEM;
init = &mux->clk_data;
regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0);
of_node_put(regmap_node);
if (!regmap_node) {
dev_err(dev, "Fail to get serdes-clk node\n");
return -ENODEV;
}
regmap = syscon_node_to_regmap(regmap_node->parent);
if (IS_ERR(regmap)) {
dev_err(dev, "Fail to get Syscon regmap\n");
return PTR_ERR(regmap);
}
num_parents = of_clk_get_parent_count(node);
if (num_parents < 2) {
dev_err(dev, "SERDES clock must have parents\n");
return -EINVAL;
}
parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
GFP_KERNEL);
if (!parent_names)
return -ENOMEM;
of_clk_parent_fill(node, parent_names, num_parents);
addr = of_get_address(regmap_node, 0, NULL, NULL);
if (!addr)
return -EINVAL;
reg = be32_to_cpu(*addr);
init->ops = &serdes_am654_clk_mux_ops;
init->flags = CLK_SET_RATE_NO_REPARENT;
init->parent_names = parent_names;
init->num_parents = num_parents;
init->name = clock_name;
mux->regmap = regmap;
mux->reg = reg;
mux->clk_id = clock_num;
mux->hw.init = init;
clk = devm_clk_register(dev, &mux->hw);
if (IS_ERR(clk))
return PTR_ERR(clk);
am654_phy->clks[clock_num] = clk;
return 0;
}
static const struct of_device_id serdes_am654_id_table[] = {
{
.compatible = "ti,phy-am654-serdes",
},
{}
};
MODULE_DEVICE_TABLE(of, serdes_am654_id_table);
static int serdes_am654_regfield_init(struct serdes_am654 *am654_phy)
{
struct regmap *regmap = am654_phy->regmap;
struct device *dev = am654_phy->dev;
am654_phy->cmu_master_cdn_o = devm_regmap_field_alloc(dev, regmap,
cmu_master_cdn_o);
if (IS_ERR(am654_phy->cmu_master_cdn_o)) {
dev_err(dev, "CMU_MASTER_CDN_O reg field init failed\n");
return PTR_ERR(am654_phy->cmu_master_cdn_o);
}
am654_phy->config_version = devm_regmap_field_alloc(dev, regmap,
config_version);
if (IS_ERR(am654_phy->config_version)) {
dev_err(dev, "CONFIG_VERSION reg field init failed\n");
return PTR_ERR(am654_phy->config_version);
}
am654_phy->l1_master_cdn_o = devm_regmap_field_alloc(dev, regmap,
l1_master_cdn_o);
if (IS_ERR(am654_phy->l1_master_cdn_o)) {
dev_err(dev, "L1_MASTER_CDN_O reg field init failed\n");
return PTR_ERR(am654_phy->l1_master_cdn_o);
}
am654_phy->cmu_ok_i_0 = devm_regmap_field_alloc(dev, regmap,
cmu_ok_i_0);
if (IS_ERR(am654_phy->cmu_ok_i_0)) {
dev_err(dev, "CMU_OK_I_0 reg field init failed\n");
return PTR_ERR(am654_phy->cmu_ok_i_0);
}
am654_phy->por_en = devm_regmap_field_alloc(dev, regmap, por_en);
if (IS_ERR(am654_phy->por_en)) {
dev_err(dev, "POR_EN reg field init failed\n");
return PTR_ERR(am654_phy->por_en);
}
am654_phy->tx0_enable = devm_regmap_field_alloc(dev, regmap,
tx0_enable);
if (IS_ERR(am654_phy->tx0_enable)) {
dev_err(dev, "TX0_ENABLE reg field init failed\n");
return PTR_ERR(am654_phy->tx0_enable);
}
am654_phy->rx0_enable = devm_regmap_field_alloc(dev, regmap,
rx0_enable);
if (IS_ERR(am654_phy->rx0_enable)) {
dev_err(dev, "RX0_ENABLE reg field init failed\n");
return PTR_ERR(am654_phy->rx0_enable);
}
am654_phy->pll_enable = devm_regmap_field_alloc(dev, regmap,
pll_enable);
if (IS_ERR(am654_phy->pll_enable)) {
dev_err(dev, "PLL_ENABLE reg field init failed\n");
return PTR_ERR(am654_phy->pll_enable);
}
am654_phy->pll_ok = devm_regmap_field_alloc(dev, regmap, pll_ok);
if (IS_ERR(am654_phy->pll_ok)) {
dev_err(dev, "PLL_OK reg field init failed\n");
return PTR_ERR(am654_phy->pll_ok);
}
return 0;
}
static int serdes_am654_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
struct clk_onecell_data *clk_data;
struct serdes_am654 *am654_phy;
struct mux_control *control;
const char *clock_name;
struct regmap *regmap;
void __iomem *base;
struct phy *phy;
int ret;
int i;
am654_phy = devm_kzalloc(dev, sizeof(*am654_phy), GFP_KERNEL);
if (!am654_phy)
return -ENOMEM;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(dev, base, &serdes_am654_regmap_config);
if (IS_ERR(regmap)) {
dev_err(dev, "Failed to initialize regmap\n");
return PTR_ERR(regmap);
}
control = devm_mux_control_get(dev, NULL);
if (IS_ERR(control))
return PTR_ERR(control);
am654_phy->dev = dev;
am654_phy->of_node = node;
am654_phy->regmap = regmap;
am654_phy->control = control;
am654_phy->type = PHY_NONE;
ret = serdes_am654_regfield_init(am654_phy);
if (ret) {
dev_err(dev, "Failed to initialize regfields\n");
return ret;
}
platform_set_drvdata(pdev, am654_phy);
for (i = 0; i < SERDES_NUM_CLOCKS; i++) {
ret = of_property_read_string_index(node, "clock-output-names",
i, &clock_name);
if (ret) {
dev_err(dev, "Failed to get clock name\n");
return ret;
}
ret = serdes_am654_clk_register(am654_phy, clock_name, i);
if (ret) {
dev_err(dev, "Failed to initialize clock %s\n",
clock_name);
return ret;
}
}
clk_data = &am654_phy->clk_data;
clk_data->clks = am654_phy->clks;
clk_data->clk_num = SERDES_NUM_CLOCKS;
ret = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
if (ret)
return ret;
pm_runtime_enable(dev);
phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(phy))
return PTR_ERR(phy);
phy_set_drvdata(phy, am654_phy);
phy_provider = devm_of_phy_provider_register(dev, serdes_am654_xlate);
if (IS_ERR(phy_provider)) {
ret = PTR_ERR(phy_provider);
goto clk_err;
}
return 0;
clk_err:
of_clk_del_provider(node);
return ret;
}
static int serdes_am654_remove(struct platform_device *pdev)
{
struct serdes_am654 *am654_phy = platform_get_drvdata(pdev);
struct device_node *node = am654_phy->of_node;
pm_runtime_disable(&pdev->dev);
of_clk_del_provider(node);
return 0;
}
static struct platform_driver serdes_am654_driver = {
.probe = serdes_am654_probe,
.remove = serdes_am654_remove,
.driver = {
.name = "phy-am654",
.of_match_table = serdes_am654_id_table,
},
};
module_platform_driver(serdes_am654_driver);
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("TI AM654x SERDES driver");
MODULE_LICENSE("GPL v2");

352
drivers/phy/ti/phy-ti-pipe3.c
View File

@ -56,51 +56,73 @@
#define SATA_PLL_SOFT_RESET BIT(18)
#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK GENMASK(21, 14)
#define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14
#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK GENMASK(31, 22)
#define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22
#define PIPE3_PHY_TX_RX_POWERON 0x3
#define PIPE3_PHY_TX_RX_POWEROFF 0x0
#define PIPE3_PHY_RX_POWERON (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
#define PIPE3_PHY_TX_POWERON (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
#define PCIE_PCS_MASK 0xFF0000
#define PCIE_PCS_DELAY_COUNT_SHIFT 0x10
#define PCIEPHYRX_ANA_PROGRAMMABILITY 0x0000000C
#define PIPE3_PHY_RX_ANA_PROGRAMMABILITY 0x0000000C
#define INTERFACE_MASK GENMASK(31, 27)
#define INTERFACE_SHIFT 27
#define INTERFACE_MODE_USBSS BIT(4)
#define INTERFACE_MODE_SATA_1P5 BIT(3)
#define INTERFACE_MODE_SATA_3P0 BIT(2)
#define INTERFACE_MODE_PCIE BIT(0)
#define LOSD_MASK GENMASK(17, 14)
#define LOSD_SHIFT 14
#define MEM_PLLDIV GENMASK(6, 5)
#define PCIEPHYRX_TRIM 0x0000001C
#define MEM_DLL_TRIM_SEL GENMASK(31, 30)
#define PIPE3_PHY_RX_TRIM 0x0000001C
#define MEM_DLL_TRIM_SEL_MASK GENMASK(31, 30)
#define MEM_DLL_TRIM_SHIFT 30
#define PCIEPHYRX_DLL 0x00000024
#define MEM_DLL_PHINT_RATE GENMASK(31, 30)
#define PIPE3_PHY_RX_DLL 0x00000024
#define MEM_DLL_PHINT_RATE_MASK GENMASK(31, 30)
#define MEM_DLL_PHINT_RATE_SHIFT 30
#define PCIEPHYRX_DIGITAL_MODES 0x00000028
#define PIPE3_PHY_RX_DIGITAL_MODES 0x00000028
#define MEM_HS_RATE_MASK GENMASK(28, 27)
#define MEM_HS_RATE_SHIFT 27
#define MEM_OVRD_HS_RATE BIT(26)
#define MEM_OVRD_HS_RATE_SHIFT 26
#define MEM_CDR_FASTLOCK BIT(23)
#define MEM_CDR_LBW GENMASK(22, 21)
#define MEM_CDR_STEPCNT GENMASK(20, 19)
#define MEM_CDR_FASTLOCK_SHIFT 23
#define MEM_CDR_LBW_MASK GENMASK(22, 21)
#define MEM_CDR_LBW_SHIFT 21
#define MEM_CDR_STEPCNT_MASK GENMASK(20, 19)
#define MEM_CDR_STEPCNT_SHIFT 19
#define MEM_CDR_STL_MASK GENMASK(18, 16)
#define MEM_CDR_STL_SHIFT 16
#define MEM_CDR_THR_MASK GENMASK(15, 13)
#define MEM_CDR_THR_SHIFT 13
#define MEM_CDR_THR_MODE BIT(12)
#define MEM_CDR_CDR_2NDO_SDM_MODE BIT(11)
#define MEM_OVRD_HS_RATE BIT(26)
#define MEM_CDR_THR_MODE_SHIFT 12
#define MEM_CDR_2NDO_SDM_MODE BIT(11)
#define MEM_CDR_2NDO_SDM_MODE_SHIFT 11
#define PCIEPHYRX_EQUALIZER 0x00000038
#define MEM_EQLEV GENMASK(31, 16)
#define MEM_EQFTC GENMASK(15, 11)
#define MEM_EQCTL GENMASK(10, 7)
#define PIPE3_PHY_RX_EQUALIZER 0x00000038
#define MEM_EQLEV_MASK GENMASK(31, 16)
#define MEM_EQLEV_SHIFT 16
#define MEM_EQFTC_MASK GENMASK(15, 11)
#define MEM_EQFTC_SHIFT 11
#define MEM_EQCTL_MASK GENMASK(10, 7)
#define MEM_EQCTL_SHIFT 7
#define MEM_OVRD_EQLEV BIT(2)
#define MEM_OVRD_EQLEV_SHIFT 2
#define MEM_OVRD_EQFTC BIT(1)
#define MEM_OVRD_EQFTC_SHIFT 1
#define SATA_PHY_RX_IO_AND_A2D_OVERRIDES 0x44
#define MEM_CDR_LOS_SOURCE_MASK GENMASK(10, 9)
#define MEM_CDR_LOS_SOURCE_SHIFT 9
/*
* This is an Empirical value that works, need to confirm the actual
@ -110,6 +132,10 @@
#define PLL_IDLE_TIME 100 /* in milliseconds */
#define PLL_LOCK_TIME 100 /* in milliseconds */
enum pipe3_mode { PIPE3_MODE_PCIE = 1,
PIPE3_MODE_SATA,
PIPE3_MODE_USBSS };
struct pipe3_dpll_params {
u16 m;
u8 n;
@ -123,6 +149,27 @@ struct pipe3_dpll_map {
struct pipe3_dpll_params params;
};
struct pipe3_settings {
u8 ana_interface;
u8 ana_losd;
u8 dig_fastlock;
u8 dig_lbw;
u8 dig_stepcnt;
u8 dig_stl;
u8 dig_thr;
u8 dig_thr_mode;
u8 dig_2ndo_sdm_mode;
u8 dig_hs_rate;
u8 dig_ovrd_hs_rate;
u8 dll_trim_sel;
u8 dll_phint_rate;
u8 eq_lev;
u8 eq_ftc;
u8 eq_ctl;
u8 eq_ovrd_lev;
u8 eq_ovrd_ftc;
};
struct ti_pipe3 {
void __iomem *pll_ctrl_base;
void __iomem *phy_rx;
@ -141,6 +188,8 @@ struct ti_pipe3 {
unsigned int power_reg; /* power reg. index within syscon */
unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */
bool sata_refclk_enabled;
enum pipe3_mode mode;
struct pipe3_settings settings;
};
static struct pipe3_dpll_map dpll_map_usb[] = {
@ -163,6 +212,89 @@ static struct pipe3_dpll_map dpll_map_sata[] = {
{ }, /* Terminator */
};
struct pipe3_data {
enum pipe3_mode mode;
struct pipe3_dpll_map *dpll_map;
struct pipe3_settings settings;
};
static struct pipe3_data data_usb = {
.mode = PIPE3_MODE_USBSS,
.dpll_map = dpll_map_usb,
.settings = {
/* DRA75x TRM Table 26-17 Preferred USB3_PHY_RX SCP Register Settings */
.ana_interface = INTERFACE_MODE_USBSS,
.ana_losd = 0xa,
.dig_fastlock = 1,
.dig_lbw = 3,
.dig_stepcnt = 0,
.dig_stl = 0x3,
.dig_thr = 1,
.dig_thr_mode = 1,
.dig_2ndo_sdm_mode = 0,
.dig_hs_rate = 0,
.dig_ovrd_hs_rate = 1,
.dll_trim_sel = 0x2,
.dll_phint_rate = 0x3,
.eq_lev = 0,
.eq_ftc = 0,
.eq_ctl = 0x9,
.eq_ovrd_lev = 0,
.eq_ovrd_ftc = 0,
},
};
static struct pipe3_data data_sata = {
.mode = PIPE3_MODE_SATA,
.dpll_map = dpll_map_sata,
.settings = {
/* DRA75x TRM Table 26-9 Preferred SATA_PHY_RX SCP Register Settings */
.ana_interface = INTERFACE_MODE_SATA_3P0,
.ana_losd = 0x5,
.dig_fastlock = 1,
.dig_lbw = 3,
.dig_stepcnt = 0,
.dig_stl = 0x3,
.dig_thr = 1,
.dig_thr_mode = 1,
.dig_2ndo_sdm_mode = 0,
.dig_hs_rate = 0, /* Not in TRM preferred settings */
.dig_ovrd_hs_rate = 0, /* Not in TRM preferred settings */
.dll_trim_sel = 0x1,
.dll_phint_rate = 0x2, /* for 1.5 GHz DPLL clock */
.eq_lev = 0,
.eq_ftc = 0x1f,
.eq_ctl = 0,
.eq_ovrd_lev = 1,
.eq_ovrd_ftc = 1,
},
};
static struct pipe3_data data_pcie = {
.mode = PIPE3_MODE_PCIE,
.settings = {
/* DRA75x TRM Table 26-62 Preferred PCIe_PHY_RX SCP Register Settings */
.ana_interface = INTERFACE_MODE_PCIE,
.ana_losd = 0xa,
.dig_fastlock = 1,
.dig_lbw = 3,
.dig_stepcnt = 0,
.dig_stl = 0x3,
.dig_thr = 1,
.dig_thr_mode = 1,
.dig_2ndo_sdm_mode = 0,
.dig_hs_rate = 0,
.dig_ovrd_hs_rate = 0,
.dll_trim_sel = 0x2,
.dll_phint_rate = 0x3,
.eq_lev = 0,
.eq_ftc = 0x1f,
.eq_ctl = 1,
.eq_ovrd_lev = 0,
.eq_ovrd_ftc = 0,
},
};
static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
{
return __raw_readl(addr + offset);
@ -196,7 +328,6 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
static int ti_pipe3_power_off(struct phy *x)
{
u32 val;
int ret;
struct ti_pipe3 *phy = phy_get_drvdata(x);
@ -205,13 +336,13 @@ static int ti_pipe3_power_off(struct phy *x)
return 0;
}
val = PIPE3_PHY_TX_RX_POWEROFF << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val);
PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0);
return ret;
}
static void ti_pipe3_calibrate(struct ti_pipe3 *phy);
static int ti_pipe3_power_on(struct phy *x)
{
u32 val;
@ -219,6 +350,7 @@ static int ti_pipe3_power_on(struct phy *x)
int ret;
unsigned long rate;
struct ti_pipe3 *phy = phy_get_drvdata(x);
bool rx_pending = false;
if (!phy->phy_power_syscon) {
omap_control_phy_power(phy->control_dev, 1);
@ -231,14 +363,35 @@ static int ti_pipe3_power_on(struct phy *x)
return -EINVAL;
}
rate = rate / 1000000;
mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
mask, val);
return ret;
/*
* For PCIe, TX and RX must be powered on simultaneously.
* For USB and SATA, TX must be powered on before RX
*/
mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) {
val = PIPE3_PHY_TX_POWERON;
rx_pending = true;
} else {
val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
}
regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
mask, val);
if (rx_pending) {
val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
mask, val);
}
if (phy->mode == PIPE3_MODE_PCIE)
ti_pipe3_calibrate(phy);
return 0;
}
static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
@ -300,32 +453,55 @@ static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
static void ti_pipe3_calibrate(struct ti_pipe3 *phy)
{
u32 val;
struct pipe3_settings *s = &phy->settings;
val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY);
val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
val = (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT);
ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY, val);
val |= (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT);
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val);
val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES);
val &= ~(MEM_CDR_STEPCNT | MEM_CDR_STL_MASK | MEM_CDR_THR_MASK |
MEM_CDR_CDR_2NDO_SDM_MODE | MEM_OVRD_HS_RATE);
val |= (MEM_CDR_FASTLOCK | MEM_CDR_LBW | 0x3 << MEM_CDR_STL_SHIFT |
0x1 << MEM_CDR_THR_SHIFT | MEM_CDR_THR_MODE);
ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES, val);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES);
val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK |
MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK |
MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE);
val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT |
s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT |
s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT |
s->dig_lbw << MEM_CDR_LBW_SHIFT |
s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT |
s->dig_stl << MEM_CDR_STL_SHIFT |
s->dig_thr << MEM_CDR_THR_SHIFT |
s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT |
s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT;
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val);
val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_TRIM);
val &= ~MEM_DLL_TRIM_SEL;
val |= 0x2 << MEM_DLL_TRIM_SHIFT;
ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_TRIM, val);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM);
val &= ~MEM_DLL_TRIM_SEL_MASK;
val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT;
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val);
val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DLL);
val |= MEM_DLL_PHINT_RATE;
ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DLL, val);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL);
val &= ~MEM_DLL_PHINT_RATE_MASK;
val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT;
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val);
val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_EQUALIZER);
val &= ~(MEM_EQLEV | MEM_EQCTL | MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
val |= MEM_EQFTC | 0x1 << MEM_EQCTL_SHIFT;
ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_EQUALIZER, val);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER);
val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK |
MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
val |= s->eq_lev << MEM_EQLEV_SHIFT |
s->eq_ftc << MEM_EQFTC_SHIFT |
s->eq_ctl << MEM_EQCTL_SHIFT |
s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT |
s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT;
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val);
if (phy->mode == PIPE3_MODE_SATA) {
val = ti_pipe3_readl(phy->phy_rx,
SATA_PHY_RX_IO_AND_A2D_OVERRIDES);
val &= ~MEM_CDR_LOS_SOURCE_MASK;
ti_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES,
val);
}
}
static int ti_pipe3_init(struct phy *x)
@ -340,7 +516,7 @@ static int ti_pipe3_init(struct phy *x)
* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
* 18-1804.
*/
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
if (phy->mode == PIPE3_MODE_PCIE) {
if (!phy->pcs_syscon) {
omap_control_pcie_pcs(phy->control_dev, 0x96);
return 0;
@ -349,12 +525,7 @@ static int ti_pipe3_init(struct phy *x)
val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
PCIE_PCS_MASK, val);
if (ret)
return ret;
ti_pipe3_calibrate(phy);
return 0;
return ret;
}
/* Bring it out of IDLE if it is IDLE */
@ -367,8 +538,7 @@ static int ti_pipe3_init(struct phy *x)
/* SATA has issues if re-programmed when locked */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
"ti,phy-pipe3-sata"))
if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA)
return ret;
/* Program the DPLL */
@ -378,6 +548,8 @@ static int ti_pipe3_init(struct phy *x)
return -EINVAL;
}
ti_pipe3_calibrate(phy);
return ret;
}
@ -390,12 +562,11 @@ static int ti_pipe3_exit(struct phy *x)
/* If dpll_reset_syscon is not present we wont power down SATA DPLL
* due to Errata i783
*/
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") &&
!phy->dpll_reset_syscon)
if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon)
return 0;
/* PCIe doesn't have internal DPLL */
if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
if (phy->mode != PIPE3_MODE_PCIE) {
/* Put DPLL in IDLE mode */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val |= PLL_IDLE;
@ -418,7 +589,7 @@ static int ti_pipe3_exit(struct phy *x)
}
/* i783: SATA needs control bit toggle after PLL unlock */
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) {
if (phy->mode == PIPE3_MODE_SATA) {
regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
@ -443,7 +614,6 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
{
struct clk *clk;
struct device *dev = phy->dev;
struct device_node *node = dev->of_node;
phy->refclk = devm_clk_get(dev, "refclk");
if (IS_ERR(phy->refclk)) {
@ -451,11 +621,11 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
/* older DTBs have missing refclk in SATA PHY
* so don't bail out in case of SATA PHY.
*/
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
if (phy->mode != PIPE3_MODE_SATA)
return PTR_ERR(phy->refclk);
}
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
if (phy->mode != PIPE3_MODE_SATA) {
phy->wkupclk = devm_clk_get(dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
dev_err(dev, "unable to get wkupclk\n");
@ -465,8 +635,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
phy->wkupclk = ERR_PTR(-ENODEV);
}
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") ||
phy->phy_power_syscon) {
if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) {
phy->sys_clk = devm_clk_get(dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
dev_err(dev, "unable to get sysclk\n");
@ -474,7 +643,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
}
}
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
if (phy->mode == PIPE3_MODE_PCIE) {
clk = devm_clk_get(dev, "dpll_ref");
if (IS_ERR(clk)) {
dev_err(dev, "unable to get dpll ref clk\n");
@ -546,7 +715,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
phy->control_dev = &control_pdev->dev;
}
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
if (phy->mode == PIPE3_MODE_PCIE) {
phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
"syscon-pcs");
if (IS_ERR(phy->pcs_syscon)) {
@ -564,7 +733,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
}
}
if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
if (phy->mode == PIPE3_MODE_SATA) {
phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
"syscon-pllreset");
if (IS_ERR(phy->dpll_reset_syscon)) {
@ -589,12 +758,8 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
{
struct resource *res;
struct device *dev = phy->dev;
struct device_node *node = dev->of_node;
struct platform_device *pdev = to_platform_device(dev);
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
return 0;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"phy_rx");
phy->phy_rx = devm_ioremap_resource(dev, res);
@ -611,24 +776,12 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
{
struct resource *res;
const struct of_device_id *match;
struct device *dev = phy->dev;
struct device_node *node = dev->of_node;
struct platform_device *pdev = to_platform_device(dev);
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
if (phy->mode == PIPE3_MODE_PCIE)
return 0;
match = of_match_device(ti_pipe3_id_table, dev);
if (!match)
return -EINVAL;
phy->dpll_map = (struct pipe3_dpll_map *)match->data;
if (!phy->dpll_map) {
dev_err(dev, "no DPLL data\n");
return -EINVAL;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"pll_ctrl");
phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
@ -640,15 +793,29 @@ static int ti_pipe3_probe(struct platform_device *pdev)
struct ti_pipe3 *phy;
struct phy *generic_phy;
struct phy_provider *phy_provider;
struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
int ret;
const struct of_device_id *match;
struct pipe3_data *data;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->dev = dev;
match = of_match_device(ti_pipe3_id_table, dev);
if (!match)
return -EINVAL;
data = (struct pipe3_data *)match->data;
if (!data) {
dev_err(dev, "no driver data\n");
return -EINVAL;
}
phy->dev = dev;
phy->mode = data->mode;
phy->dpll_map = data->dpll_map;
phy->settings = data->settings;
ret = ti_pipe3_get_pll_base(phy);
if (ret)
@ -672,7 +839,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
/*
* Prevent auto-disable of refclk for SATA PHY due to Errata i783
*/
if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
if (phy->mode == PIPE3_MODE_SATA) {
if (!IS_ERR(phy->refclk)) {
clk_prepare_enable(phy->refclk);
phy->sata_refclk_enabled = true;
@ -762,18 +929,19 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
static const struct of_device_id ti_pipe3_id_table[] = {
{
.compatible = "ti,phy-usb3",
.data = dpll_map_usb,
.data = &data_usb,
},
{
.compatible = "ti,omap-usb3",
.data = dpll_map_usb,
.data = &data_usb,
},
{
.compatible = "ti,phy-pipe3-sata",
.data = dpll_map_sata,
.data = &data_sata,
},
{
.compatible = "ti,phy-pipe3-pcie",
.data = &data_pcie,
},
{}
};

1
drivers/scsi/ufs/Kconfig
View File

@ -99,6 +99,7 @@ config SCSI_UFS_DWC_TC_PLATFORM
config SCSI_UFS_QCOM
tristate "QCOM specific hooks to UFS controller platform driver"
depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
select RESET_CONTROLLER
help
This selects the QCOM specific additions to UFSHCD platform driver.
UFS host on QCOM needs some vendor specific configuration before

114
drivers/scsi/ufs/ufs-qcom.c
View File

@ -16,6 +16,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/reset-controller.h>
#include "ufshcd.h"
#include "ufshcd-pltfrm.h"
@ -49,6 +50,11 @@ static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
u32 clk_cycles);
static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
{
return container_of(rcd, struct ufs_qcom_host, rcdev);
}
static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len,
const char *prefix, void *priv)
{
@ -255,11 +261,6 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
if (is_rate_B)
phy_set_mode(phy, PHY_MODE_UFS_HS_B);
/* Assert PHY reset and apply PHY calibration values */
ufs_qcom_assert_reset(hba);
/* provide 1ms delay to let the reset pulse propagate */
usleep_range(1000, 1100);
/* phy initialization - calibrate the phy */
ret = phy_init(phy);
if (ret) {
@ -268,15 +269,6 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
goto out;
}
/* De-assert PHY reset and start serdes */
ufs_qcom_deassert_reset(hba);
/*
* after reset deassertion, phy will need all ref clocks,
* voltage, current to settle down before starting serdes.
*/
usleep_range(1000, 1100);
/* power on phy - start serdes and phy's power and clocks */
ret = phy_power_on(phy);
if (ret) {
@ -290,7 +282,6 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
return 0;
out_disable_phy:
ufs_qcom_assert_reset(hba);
phy_exit(phy);
out:
return ret;
@ -554,21 +545,10 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ufs_qcom_disable_lane_clks(host);
phy_power_off(phy);
/* Assert PHY soft reset */
ufs_qcom_assert_reset(hba);
goto out;
}
/*
* If UniPro link is not active, PHY ref_clk, main PHY analog power
* rail and low noise analog power rail for PLL can be switched off.
*/
if (!ufs_qcom_is_link_active(hba)) {
} else if (!ufs_qcom_is_link_active(hba)) {
ufs_qcom_disable_lane_clks(host);
phy_power_off(phy);
}
out:
return ret;
}
@ -578,21 +558,26 @@ static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
struct phy *phy = host->generic_phy;
int err;
err = phy_power_on(phy);
if (err) {
dev_err(hba->dev, "%s: failed enabling regs, err = %d\n",
__func__, err);
goto out;
if (ufs_qcom_is_link_off(hba)) {
err = phy_power_on(phy);
if (err) {
dev_err(hba->dev, "%s: failed PHY power on: %d\n",
__func__, err);
return err;
}
err = ufs_qcom_enable_lane_clks(host);
if (err)
return err;
} else if (!ufs_qcom_is_link_active(hba)) {
err = ufs_qcom_enable_lane_clks(host);
if (err)
return err;
}
err = ufs_qcom_enable_lane_clks(host);
if (err)
goto out;
hba->is_sys_suspended = false;
out:
return err;
return 0;
}
struct ufs_qcom_dev_params {
@ -1118,8 +1103,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
return 0;
if (on && (status == POST_CHANGE)) {
phy_power_on(host->generic_phy);
/* enable the device ref clock for HS mode*/
if (ufshcd_is_hs_mode(&hba->pwr_info))
ufs_qcom_dev_ref_clk_ctrl(host, true);
@ -1131,9 +1114,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
if (!ufs_qcom_is_link_active(hba)) {
/* disable device ref_clk */
ufs_qcom_dev_ref_clk_ctrl(host, false);
/* powering off PHY during aggressive clk gating */
phy_power_off(host->generic_phy);
}
vote = host->bus_vote.min_bw_vote;
@ -1147,6 +1127,41 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
return err;
}
static int
ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
{
struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
/* Currently this code only knows about a single reset. */
WARN_ON(id);
ufs_qcom_assert_reset(host->hba);
/* provide 1ms delay to let the reset pulse propagate. */
usleep_range(1000, 1100);
return 0;
}
static int
ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
{
struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
/* Currently this code only knows about a single reset. */
WARN_ON(id);
ufs_qcom_deassert_reset(host->hba);
/*
* after reset deassertion, phy will need all ref clocks,
* voltage, current to settle down before starting serdes.
*/
usleep_range(1000, 1100);
return 0;
}
static const struct reset_control_ops ufs_qcom_reset_ops = {
.assert = ufs_qcom_reset_assert,
.deassert = ufs_qcom_reset_deassert,
};
#define ANDROID_BOOT_DEV_MAX 30
static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
@ -1191,6 +1206,17 @@ static int ufs_qcom_init(struct ufs_hba *hba)
host->hba = hba;
ufshcd_set_variant(hba, host);
/* Fire up the reset controller. Failure here is non-fatal. */
host->rcdev.of_node = dev->of_node;
host->rcdev.ops = &ufs_qcom_reset_ops;
host->rcdev.owner = dev->driver->owner;
host->rcdev.nr_resets = 1;
err = devm_reset_controller_register(dev, &host->rcdev);
if (err) {
dev_warn(dev, "Failed to register reset controller\n");
err = 0;
}
/*
* voting/devoting device ref_clk source is time consuming hence
* skip devoting it during aggressive clock gating. This clock

4
drivers/scsi/ufs/ufs-qcom.h
View File

@ -14,6 +14,8 @@
#ifndef UFS_QCOM_H_
#define UFS_QCOM_H_
#include <linux/reset-controller.h>
#define MAX_UFS_QCOM_HOSTS 1
#define MAX_U32 (~(u32)0)
#define MPHY_TX_FSM_STATE 0x41
@ -237,6 +239,8 @@ struct ufs_qcom_host {
/* Bitmask for enabling debug prints */
u32 dbg_print_en;
struct ufs_qcom_testbus testbus;
struct reset_controller_dev rcdev;
};
static inline u32

1
drivers/soc/sunxi/Kconfig
View File

@ -4,6 +4,7 @@
config SUNXI_SRAM
bool
default ARCH_SUNXI
select REGMAP_MMIO
help
Say y here to enable the SRAM controller support. This
device is responsible on mapping the SRAM in the sunXi SoCs

9
drivers/usb/chipidea/ci_hdrc_msm.c
View File

@ -205,12 +205,9 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
if (IS_ERR(clk))
return PTR_ERR(clk);
ci->fs_clk = clk = devm_clk_get(&pdev->dev, "fs");
if (IS_ERR(clk)) {
if (PTR_ERR(clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
ci->fs_clk = NULL;
}
ci->fs_clk = clk = devm_clk_get_optional(&pdev->dev, "fs");
if (IS_ERR(clk))
return PTR_ERR(clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
ci->base = devm_ioremap_resource(&pdev->dev, res);

63
drivers/usb/class/cdc-acm.c
View File

@ -468,14 +468,13 @@ static void acm_read_bulk_callback(struct urb *urb)
{
struct acm_rb *rb = urb->context;
struct acm *acm = rb->instance;
unsigned long flags;
int status = urb->status;
bool stopped = false;
bool stalled = false;
dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
rb->index, urb->actual_length, status);
set_bit(rb->index, &acm->read_urbs_free);
if (!acm->dev) {
dev_dbg(&acm->data->dev, "%s - disconnected\n", __func__);
return;
@ -488,15 +487,16 @@ static void acm_read_bulk_callback(struct urb *urb)
break;
case -EPIPE:
set_bit(EVENT_RX_STALL, &acm->flags);
schedule_work(&acm->work);
return;
stalled = true;
break;
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&acm->data->dev,
"%s - urb shutting down with status: %d\n",
__func__, status);
return;
stopped = true;
break;
default:
dev_dbg(&acm->data->dev,
"%s - nonzero urb status received: %d\n",
@ -505,20 +505,29 @@ static void acm_read_bulk_callback(struct urb *urb)
}
/*
* Unthrottle may run on another CPU which needs to see events
* in the same order. Submission has an implict barrier
* Make sure URB processing is done before marking as free to avoid
* racing with unthrottle() on another CPU. Matches the barriers
* implied by the test_and_clear_bit() in acm_submit_read_urb().
*/
smp_mb__before_atomic();
set_bit(rb->index, &acm->read_urbs_free);
/*
* Make sure URB is marked as free before checking the throttled flag
* to avoid racing with unthrottle() on another CPU. Matches the
* smp_mb() in unthrottle().
*/
smp_mb__after_atomic();
/* throttle device if requested by tty */
spin_lock_irqsave(&acm->read_lock, flags);
acm->throttled = acm->throttle_req;
if (!acm->throttled) {
spin_unlock_irqrestore(&acm->read_lock, flags);
acm_submit_read_urb(acm, rb->index, GFP_ATOMIC);
} else {
spin_unlock_irqrestore(&acm->read_lock, flags);
if (stopped || stalled) {
if (stalled)
schedule_work(&acm->work);
return;
}
if (test_bit(ACM_THROTTLED, &acm->flags))
return;
acm_submit_read_urb(acm, rb->index, GFP_ATOMIC);
}
/* data interface wrote those outgoing bytes */
@ -655,10 +664,7 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
/*
* Unthrottle device in case the TTY was closed while throttled.
*/
spin_lock_irq(&acm->read_lock);
acm->throttled = 0;
acm->throttle_req = 0;
spin_unlock_irq(&acm->read_lock);
clear_bit(ACM_THROTTLED, &acm->flags);
retval = acm_submit_read_urbs(acm, GFP_KERNEL);
if (retval)
@ -826,24 +832,19 @@ static void acm_tty_throttle(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
spin_lock_irq(&acm->read_lock);
acm->throttle_req = 1;
spin_unlock_irq(&acm->read_lock);
set_bit(ACM_THROTTLED, &acm->flags);
}
static void acm_tty_unthrottle(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
unsigned int was_throttled;
spin_lock_irq(&acm->read_lock);
was_throttled = acm->throttled;
acm->throttled = 0;
acm->throttle_req = 0;
spin_unlock_irq(&acm->read_lock);
clear_bit(ACM_THROTTLED, &acm->flags);
if (was_throttled)
acm_submit_read_urbs(acm, GFP_KERNEL);
/* Matches the smp_mb__after_atomic() in acm_read_bulk_callback(). */
smp_mb();
acm_submit_read_urbs(acm, GFP_KERNEL);
}
static int acm_tty_break_ctl(struct tty_struct *tty, int state)

Some files were not shown because too many files have changed in this diff Show More