redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

media: ov2680: dt: Add bindings for OV2680 

Add device tree binding documentation for the OV2680 camera sensor.

[Sakari Ailus: Squash MAINTAINERS entry from Rui]

CC: devicetree@vger.kernel.org
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
hifive-unleashed-5.1
Rui Miguel Silva 2018-07-03 10:08:02 -04:00 committed by Mauro Carvalho Chehab
parent aab7ed1c39
commit 1434e3b348
2 changed files with 54 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
Documentation/devicetree/bindings/media/i2c/ov2680.txt 100644
View File

@ -0,0 +1,46 @@
* Omnivision OV2680 MIPI CSI-2 sensor
Required Properties:
- compatible: should be "ovti,ov2680".
- clocks: reference to the xvclk input clock.
- clock-names: should be "xvclk".
- DOVDD-supply: Digital I/O voltage supply.
- DVDD-supply: Digital core voltage supply.
- AVDD-supply: Analog voltage supply.
Optional Properties:
- reset-gpios: reference to the GPIO connected to the powerdown/reset pin,
if any. This is an active low signal to the OV2680.
The device node must contain one 'port' child node for its digital output
video port, and this port must have a single endpoint in accordance with
the video interface bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
Endpoint node required properties for CSI-2 connection are:
- remote-endpoint: a phandle to the bus receiver's endpoint node.
- clock-lanes: should be set to <0> (clock lane on hardware lane 0).
- data-lanes: should be set to <1> (one CSI-2 lane supported).
Example:
&i2c2 {
ov2680: camera-sensor@36 {
compatible = "ovti,ov2680";
reg = <0x36>;
clocks = <&osc>;
clock-names = "xvclk";
reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
DOVDD-supply = <&sw2_reg>;
DVDD-supply = <&sw2_reg>;
AVDD-supply = <&reg_peri_3p15v>;
port {
ov2680_to_mipi: endpoint {
remote-endpoint = <&mipi_from_sensor>;
clock-lanes = <0>;
data-lanes = <1>;
};
};
};
};

8
MAINTAINERS
View File

@ -10490,6 +10490,14 @@ T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/i2c/ov13858.c
OMNIVISION OV2680 SENSOR DRIVER
M: Rui Miguel Silva <rmfrfs@gmail.com>
L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/i2c/ov2680.c
F: Documentation/devicetree/bindings/media/i2c/ov2680.txt
OMNIVISION OV2685 SENSOR DRIVER
M: Shunqian Zheng <zhengsq@rock-chips.com>
L: linux-media@vger.kernel.org