staging: comedi: adv_pci1724: define the sync output control/status reg

Define the bits for the synchronous output control/status register and
remove the enum.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
H Hartley Sweeten 2014-11-20 15:10:54 -07:00 committed by Greg Kroah-Hartman
parent 83d94bcc8e
commit 14356535fb

View file

@ -68,16 +68,13 @@ supported PCI devices are configured as comedi devices automatically.
#define PCI1724_DAC_CTRL_MODE_NORMAL (3 << 14)
#define PCI1724_DAC_CTRL_MODE_MASK (3 << 14)
#define PCI1724_DAC_CTRL_DATA(x) (((x) & 0x3fff) << 0)
#define PCI1724_SYNC_OUTPUT_REG 0x04
#define PCI1724_SYNC_CTRL_REG 0x04
#define PCI1724_SYNC_CTRL_DACSTAT (1 << 1)
#define PCI1724_SYNC_CTRL_SYN (1 << 0)
#define PCI1724_EEPROM_CTRL_REG 0x08
#define PCI1724_SYNC_OUTPUT_TRIG_REG 0x0c
#define PCI1724_BOARD_ID_REG 0x10
enum sync_output_contents {
SYNC_MODE = 0x1,
DAC_BUSY = 0x2, /* dac state machine is not ready */
};
enum sync_output_trigger_contents {
SYNC_TRIGGER_BITS = 0x0 /* any value works */
};
@ -102,8 +99,8 @@ static int adv_pci1724_dac_idle(struct comedi_device *dev,
{
unsigned int status;
status = inl(dev->iobase + PCI1724_SYNC_OUTPUT_REG);
if ((status & DAC_BUSY) == 0)
status = inl(dev->iobase + PCI1724_SYNC_CTRL_REG);
if ((status & PCI1724_SYNC_CTRL_DACSTAT) == 0)
return 0;
return -EBUSY;
}
@ -122,7 +119,7 @@ static int adv_pci1724_insn_write(struct comedi_device *dev,
ctrl = PCI1724_DAC_CTRL_GX(chan) | PCI1724_DAC_CTRL_CX(chan) | mode;
/* turn off synchronous mode */
outl(0, dev->iobase + PCI1724_SYNC_OUTPUT_REG);
outl(0, dev->iobase + PCI1724_SYNC_CTRL_REG);
for (i = 0; i < insn->n; ++i) {
unsigned int val = data[i];