redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: h1940: Use gpiolib for latch access 

This patch adds gpiolib support for h1940 latch.
With this patch it's possible to use leds-gpio and uda1380
drivers (they require gpiolib support for appropriate pins).
And now it's possible to drop leds-h1940 driver.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
hifive-unleashed-5.1
Vasily Khoruzhick 2010-09-08 12:39:46 +03:00 committed by Ben Dooks
parent 56162badad
commit 14477095ab
4 changed files with 87 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
arch/arm/mach-s3c2410/h1940-bluetooth.c
View File

@ -30,7 +30,7 @@ static void h1940bt_enable(int on)
{
if (on) {
/* Power on the chip */
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
/* Reset the chip */
mdelay(10);
@ -43,7 +43,7 @@ static void h1940bt_enable(int on)
mdelay(10);
gpio_set_value(S3C2410_GPH(1), 0);
mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
}
}
@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
if (ret) {
dev_err(&pdev->dev, "could not get GPH1\n");\
dev_err(&pdev->dev, "could not get GPH1\n");
return ret;
}
ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
if (ret) {
gpio_free(S3C2410_GPH(1));
dev_err(&pdev->dev, "could not get BT_POWER\n");
return ret;
}

57
arch/arm/mach-s3c2410/include/mach/h1940-latch.h
View File

@ -14,51 +14,30 @@
#ifndef __ASM_ARCH_H1940_LATCH_H
#define __ASM_ARCH_H1940_LATCH_H
#include <mach/gpio.h>
#ifndef __ASSEMBLY__
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#else
#define H1940_LATCH 0xF8000000
#endif
#define H1940_PA_LATCH (S3C2410_CS2)
#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
/* SD layer latch */
#define H1940_LATCH_SDQ1 (1<<16)
#define H1940_LATCH_LCD_P1 (1<<17)
#define H1940_LATCH_LCD_P2 (1<<18)
#define H1940_LATCH_LCD_P3 (1<<19)
#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */
#define H1940_LATCH_LED_RED (1<<21)
#define H1940_LATCH_SDQ7 (1<<22)
#define H1940_LATCH_USB_DP (1<<23)
#define H1940_LATCH_SDQ1 H1940_LATCH_GPIO(0)
#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1)
#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2)
#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3)
#define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4)
#define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5)
#define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6)
#define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7)
/* CPU layer latch */
#define H1940_LATCH_UDA_POWER (1<<24)
#define H1940_LATCH_AUDIO_POWER (1<<25)
#define H1940_LATCH_SM803_ENABLE (1<<26)
#define H1940_LATCH_LCD_P4 (1<<27)
#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */
#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */
#define H1940_LATCH_LED_GREEN (1<<30)
#define H1940_LATCH_LED_FLASH (1<<31)
/* default settings */
#define H1940_LATCH_DEFAULT \
H1940_LATCH_LCD_P4 | \
H1940_LATCH_SM803_ENABLE | \
H1940_LATCH_SDQ1 | \
H1940_LATCH_LCD_P1 | \
H1940_LATCH_LCD_P2 | \
H1940_LATCH_LCD_P3 | \
H1940_LATCH_MAX1698_nSHUTDOWN | \
H1940_LATCH_CPUQ5
/* control functions */
extern void h1940_latch_control(unsigned int clear, unsigned int set);
#define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8)
#define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9)
#define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10)
#define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11)
#define H1940_LATCH_CPUQ5 H1940_LATCH_GPIO(12)
#define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13)
#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14)
#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15)
#endif /* __ASM_ARCH_H1940_LATCH_H */

64
arch/arm/mach-s3c2410/mach-h1940.c
View File

@ -59,6 +59,12 @@
#include <plat/mci.h>
#include <plat/ts.h>
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#define H1940_PA_LATCH S3C2410_CS2
#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
.virtual = (unsigned long)H1940_LATCH,
@ -100,9 +106,16 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
/* Board control latch control */
static unsigned int latch_state = H1940_LATCH_DEFAULT;
static unsigned int latch_state = H1940_LATCH_BIT(H1940_LATCH_LCD_P4) |
H1940_LATCH_BIT(H1940_LATCH_SM803_ENABLE) |
H1940_LATCH_BIT(H1940_LATCH_SDQ1) |
H1940_LATCH_BIT(H1940_LATCH_LCD_P1) |
H1940_LATCH_BIT(H1940_LATCH_LCD_P2) |
H1940_LATCH_BIT(H1940_LATCH_LCD_P3) |
H1940_LATCH_BIT(H1940_LATCH_MAX1698_nSHUTDOWN) |
H1940_LATCH_BIT(H1940_LATCH_CPUQ5);
void h1940_latch_control(unsigned int clear, unsigned int set)
static void h1940_latch_control(unsigned int clear, unsigned int set)
{
unsigned long flags;
@ -116,7 +129,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set)
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(h1940_latch_control);
static inline int h1940_gpiolib_to_latch(int offset)
{
return 1 << (offset + 16);
}
static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
unsigned offset, int value)
{
int latch_bit = h1940_gpiolib_to_latch(offset);
h1940_latch_control(value ? 0 : latch_bit,
value ? latch_bit : 0);
}
static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
unsigned offset, int value)
{
h1940_gpiolib_latch_set(chip, offset, value);
return 0;
}
static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
unsigned offset)
{
return (latch_state >> (offset + 16)) & 1;
}
struct gpio_chip h1940_latch_gpiochip = {
.base = H1940_LATCH_GPIO(0),
.owner = THIS_MODULE,
.label = "H1940_LATCH",
.ngpio = 16,
.direction_output = h1940_gpiolib_latch_output,
.set = h1940_gpiolib_latch_set,
.get = h1940_gpiolib_latch_get,
};
static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{
@ -125,10 +173,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
switch (cmd)
{
case S3C2410_UDC_P_ENABLE :
h1940_latch_control(0, H1940_LATCH_USB_DP);
gpio_set_value(H1940_LATCH_USB_DP, 1);
break;
case S3C2410_UDC_P_DISABLE :
h1940_latch_control(H1940_LATCH_USB_DP, 0);
gpio_set_value(H1940_LATCH_USB_DP, 0);
break;
case S3C2410_UDC_P_RESET :
break;
@ -303,6 +351,8 @@ static void __init h1940_map_io(void)
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
s3c_pm_init();
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
}
/* H1940 and RX3715 need to reserve this for suspend */
@ -342,9 +392,11 @@ static void __init h1940_init(void)
gpio_request(S3C2410_GPC(0), "LCD power");
gpio_request(S3C2410_GPC(5), "LCD power");
gpio_request(S3C2410_GPC(6), "LCD power");
gpio_direction_input(S3C2410_GPC(6));
gpio_request(H1940_LATCH_USB_DP, "USB pullup");
gpio_direction_output(H1940_LATCH_USB_DP, 0);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
}

1
arch/arm/plat-s3c24xx/Kconfig
View File

@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA
int
default 128 if S3C24XX_GPIO_EXTRA128
default 64 if S3C24XX_GPIO_EXTRA64
default 16 if ARCH_H1940
default 0
config S3C24XX_GPIO_EXTRA64