redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

media: pci: fix several typos 

Use codespell to fix lots of typos over frontends.

Manually verified to avoid false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
hifive-unleashed-5.1
Mauro Carvalho Chehab 2019-02-18 14:28:59 -05:00
parent f8a7647d31
commit 167905540e
38 changed files with 64 additions and 64 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/media/pci/bt8xx/bttv-audio-hook.c
View File

@ -1,5 +1,5 @@
/*
* Handlers for board audio hooks, splitted from bttv-cards
* Handlers for board audio hooks, split from bttv-cards
*
* Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@kernel.org>
* This code is placed under the terms of the GNU General Public License

2
drivers/media/pci/bt8xx/bttv-audio-hook.h
View File

@ -1,5 +1,5 @@
/*
* Handlers for board audio hooks, splitted from bttv-cards
* Handlers for board audio hooks, split from bttv-cards
*
* Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@kernel.org>
* This code is placed under the terms of the GNU General Public License

12
drivers/media/pci/bt8xx/bttv-cards.c
View File

@ -2,7 +2,7 @@
bttv-cards.c
this file has configuration informations - card-specific stuff
this file has configuration information - card-specific stuff
like the big tvcards array for the most part
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
@ -1391,7 +1391,7 @@ struct tvcard bttv_tvcards[] = {
.gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
.gpiomute = 0x947fff,
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composit, SVid, Composit-on-Svid-adapter */
* tuner, Composite, SVid, Composite-on-Svid-adapter */
.muxsel = MUXSEL(2, 3, 0, 1),
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
@ -1411,7 +1411,7 @@ struct tvcard bttv_tvcards[] = {
.gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
.gpiomute = 0x947fff,
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composit, SVid, Composit-on-Svid-adapter */
* tuner, Composite, SVid, Composite-on-Svid-adapter */
.muxsel = MUXSEL(2, 3, 0, 1),
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
@ -4180,7 +4180,7 @@ static void init_PXC200(struct bttv *btv)
bttv_I2CWrite(btv,0x5E,0,0x80,1);
/* Initialise 12C508 PIC */
/* The I2CWrite and I2CRead commmands are actually to the
/* The I2CWrite and I2CRead commands are actually to the
* same chips - but the R/W bit is included in the address
* argument so the numbers are different */
@ -4289,7 +4289,7 @@ init_RTV24 (struct bttv *btv)
/* ----------------------------------------------------------------------- */
/*
* The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
* the PCI REQ signals comming from the four BT878 chips. After power
* the PCI REQ signals coming from the four BT878 chips. After power
* up, the CPLD does not forward requests to the bus, which prevents
* the BT878 from fetching RISC instructions from memory. While the
* CPLD is connected to most of the GPIOs of PCI device 0xD, only
@ -4405,7 +4405,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
gpio_bits(0x07f, muxgpio[input]);
/* reset all conections */
/* reset all connections */
gpio_bits(0x200,0x200);
mdelay(1);
gpio_bits(0x200,0x000);

4
drivers/media/pci/bt8xx/bttv-driver.c
View File

@ -2435,7 +2435,7 @@ static int bttv_s_fmt_vid_cap(struct file *file, void *priv,
f->fmt.pix.field = field;
/* update our state informations */
/* update our state information */
fh->fmt = fmt;
fh->cap.field = f->fmt.pix.field;
fh->cap.last = V4L2_FIELD_NONE;
@ -3064,7 +3064,7 @@ static int bttv_open(struct file *file)
V4L2 apps we now reset the cropping parameters as seen through
this fh, which is to say VIDIOC_G_SELECTION and scaling limit checks
will use btv->crop[0], the default cropping parameters for the
current video standard, and VIDIOC_S_FMT will not implicitely
current video standard, and VIDIOC_S_FMT will not implicitly
change the cropping parameters until VIDIOC_S_SELECTION has been
called. */
fh->do_crop = !reset_crop; /* module parameter */

2
drivers/media/pci/bt8xx/bttv-risc.c
View File

@ -93,7 +93,7 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc,
*(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
offset+=bpl;
} else {
/* scanline needs to be splitted */
/* scanline needs to be split */
todo = bpl;
*(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_SOL|
(sg_dma_len(sg)-offset));

2
drivers/media/pci/bt8xx/bttv.h
View File

@ -288,7 +288,7 @@ extern void bttv_init_card1(struct bttv *btv);
extern void bttv_init_card2(struct bttv *btv);
extern void bttv_init_tuner(struct bttv *btv);
/* card-specific funtions */
/* card-specific functions */
extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
extern u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits);

22
drivers/media/pci/bt8xx/dst.c
View File

@ -1295,15 +1295,15 @@ static int dst_get_signal(struct dst_state *state)
static int dst_tone_power_cmd(struct dst_state *state)
{
u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 };
u8 packet[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 };
if (state->dst_type != DST_TYPE_IS_SAT)
return -EOPNOTSUPP;
paket[4] = state->tx_tuna[4];
paket[2] = state->tx_tuna[2];
paket[3] = state->tx_tuna[3];
paket[7] = dst_check_sum (paket, 7);
return dst_command(state, paket, 8);
packet[4] = state->tx_tuna[4];
packet[2] = state->tx_tuna[2];
packet[3] = state->tx_tuna[3];
packet[7] = dst_check_sum (packet, 7);
return dst_command(state, packet, 8);
}
static int dst_get_tuna(struct dst_state *state)
@ -1429,18 +1429,18 @@ error:
static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd)
{
struct dst_state *state = fe->demodulator_priv;
u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
u8 packet[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
if (state->dst_type != DST_TYPE_IS_SAT)
return -EOPNOTSUPP;
if (cmd->msg_len > 0 && cmd->msg_len < 5)
memcpy(&paket[3], cmd->msg, cmd->msg_len);
memcpy(&packet[3], cmd->msg, cmd->msg_len);
else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5)
memcpy(&paket[2], cmd->msg, cmd->msg_len);
memcpy(&packet[2], cmd->msg, cmd->msg_len);
else
return -EINVAL;
paket[7] = dst_check_sum(&paket[0], 7);
return dst_command(state, paket, 8);
packet[7] = dst_check_sum(&packet[0], 7);
return dst_command(state, packet, 8);
}
static int dst_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage)

2
drivers/media/pci/cobalt/cobalt-v4l2.c
View File

@ -375,7 +375,7 @@ static void cobalt_dma_stop_streaming(struct cobalt_stream *s)
}
spin_unlock_irqrestore(&s->irqlock, flags);
/* Wait 100 milisecond for DMA to finish, abort on timeout. */
/* Wait 100 millisecond for DMA to finish, abort on timeout. */
if (!wait_event_timeout(s->q.done_wq, is_dma_done(s),
msecs_to_jiffies(timeout_msec))) {
omni_sg_dma_abort_channel(s);

2
drivers/media/pci/cx18/cx18-cards.h
View File

@ -83,7 +83,7 @@ struct cx18_gpio_i2c_slave_reset {
u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
int msecs_asserted; /* time period reset must remain asserted */
int msecs_recovery; /* time after deassert for chips to be ready */
u32 ir_reset_mask; /* GPIO to reset the Zilog Z8F0811 IR contoller */
u32 ir_reset_mask; /* GPIO to reset the Zilog Z8F0811 IR controller */
};
struct cx18_gpio_audio_input { /* select tuner/line in input */

4
drivers/media/pci/cx18/cx18-dvb.c
View File

@ -120,8 +120,8 @@ static struct zl10353_config leadtek_dvr3100h_demod = {
/*
* Due to
*
* 1. an absence of information on how to prgram the MT352
* 2. the Linux mt352 module pushing MT352 initialzation off onto us here
* 1. an absence of information on how to program the MT352
* 2. the Linux mt352 module pushing MT352 initialization off onto us here
*
* We have to use an init sequence that *you* must extract from the Windows
* driver (yuanrap.sys) and which we load as a firmware.

2
drivers/media/pci/cx18/cx18-fileops.c
View File

@ -403,7 +403,7 @@ static size_t cx18_copy_mdl_to_user(struct cx18_stream *s,
tot_written += rc;
if (stop || /* Forced stopping point for VBI insertion */
tot_written >= ucount || /* Reader request statisfied */
tot_written >= ucount || /* Reader request satisfied */
mdl->curr_buf->readpos < mdl->curr_buf->bytesused ||
mdl->readpos >= mdl->bytesused) /* MDL buffers drained */
break;

2
drivers/media/pci/cx18/cx18-io.h
View File

@ -23,7 +23,7 @@
/*
* Readback and retry of MMIO access for reliability:
* The concept was suggested by Steve Toth <stoth@linuxtv.org>.
* The implmentation is the fault of Andy Walls <awalls@md.metrocast.net>.
* The implementation is the fault of Andy Walls <awalls@md.metrocast.net>.
*
* *write* functions are implied to retry the mmio unless suffixed with _noretry
* *read* functions never retry the mmio (it never helps to do so)

2
drivers/media/pci/cx18/cx18-vbi.c
View File

@ -24,7 +24,7 @@
/*
* Raster Reference/Protection (RP) bytes, used in Start/End Active
* Video codes emitted from the digitzer in VIP 1.x mode, that flag the start
* of VBI sample or VBI ancillary data regions in the digitial ratser line.
* of VBI sample or VBI ancillary data regions in the digital ratser line.
*
* Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0
*/

2
drivers/media/pci/cx18/cx23418.h
View File

@ -439,7 +439,7 @@
/* Error in I2C data xfer (but I2C device is present) */
#define CXERR_I2CDEV_XFERERR 0x000011
/* Chanel changing component not ready */
/* Channel changing component not ready */
#define CXERR_CHANNELNOTREADY 0x000012
/* PPU (Presensation/Decoder) mail box is corrupted */

2
drivers/media/pci/cx23885/cx23885-417.c
View File

@ -1561,7 +1561,7 @@ int cx23885_417_register(struct cx23885_dev *dev)
pr_info("%s: registered device %s [mpeg]\n",
dev->name, video_device_node_name(dev->v4l_device));
/* ST: Configure the encoder paramaters, but don't begin
/* ST: Configure the encoder parameters, but don't begin
* encoding, this resolves an issue where the first time the
* encoder is started video can be choppy.
*/

2
drivers/media/pci/cx23885/cx23885-alsa.c
View File

@ -59,7 +59,7 @@ module_param(audio_debug, int, 0644);
MODULE_PARM_DESC(audio_debug, "enable debug messages [analog audio]");
/****************************************************************************
Board specific funtions
Board specific functions
****************************************************************************/
/* Constants taken from cx88-reg.h */

6
drivers/media/pci/cx23885/cx23885-core.c
View File

@ -1996,9 +1996,9 @@ static inline int encoder_on_portc(struct cx23885_dev *dev)
* and report errors if we think we're tampering with a GPIo that might
* be assigned to the encoder (and used for the host bus).
*
* GPIO 2 thru 0 - On the cx23885 bridge
* GPIO 18 thru 3 - On the cx23417 host bus interface
* GPIO 23 thru 19 - On the cx25840 a/v core
* GPIO 2 through 0 - On the cx23885 bridge
* GPIO 18 through 3 - On the cx23417 host bus interface
* GPIO 23 through 19 - On the cx25840 a/v core
*/
void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask)
{

2
drivers/media/pci/cx23885/cx23885.h
View File

@ -246,7 +246,7 @@ struct cx23885_i2c {
struct i2c_client i2c_client;
u32 i2c_rc;
/* 885 registers used for raw addess */
/* 885 registers used for raw address */
u32 i2c_period;
u32 reg_ctrl;
u32 reg_stat;

4
drivers/media/pci/cx23885/cx23888-ir.c
View File

@ -548,7 +548,7 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
ror = stats & STATS_ROR; /* Rx FIFO Over Run */
tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */
rse = irqen & IRQEN_RSE; /* Rx FIFO Service Request IRQ Enable */
rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
@ -638,7 +638,7 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
}
if (v) {
/* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */
/* Clear STATS_ROR & STATS_RTO as needed by resetting hardware */
cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl & ~v);
cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl);
*handled = true;

2
drivers/media/pci/cx25821/cx25821-alsa.c
View File

@ -120,7 +120,7 @@ module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
/****************************************************************************
Module specific funtions
Module specific functions
****************************************************************************/
/* Constants taken from cx88-reg.h */
#define AUD_INT_DN_RISCI1 (1 << 0)

2
drivers/media/pci/cx25821/cx25821-sram.h
View File

@ -24,7 +24,7 @@
#define AUDIO_CMDS_SIZE 80 /* AUDIO CMDS size in bytes */
#define MBIF_CMDS_SIZE 80 /* MBIF CMDS size in bytes */
/* #define RX_SRAM_POOL_START_SIZE = 0; // Start of useable RX SRAM for buffers */
/* #define RX_SRAM_POOL_START_SIZE = 0; // Start of usable RX SRAM for buffers */
#define VID_IQ_SIZE 64 /* VID instruction queue size in bytes */
#define MBIF_IQ_SIZE 64
#define AUDIO_IQ_SIZE 64 /* AUD instruction queue size in bytes */

2
drivers/media/pci/cx25821/cx25821.h
View File

@ -156,7 +156,7 @@ struct cx25821_i2c {
struct i2c_client i2c_client;
u32 i2c_rc;
/* cx25821 registers used for raw addess */
/* cx25821 registers used for raw address */
u32 i2c_period;
u32 reg_ctrl;
u32 reg_stat;

2
drivers/media/pci/dm1105/dm1105.c
View File

@ -517,7 +517,7 @@ static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap,
msgs[i].buf[byte] = rc;
}
} else if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) {
/* prepaired for cx24116 firmware */
/* prepared for cx24116 firmware */
/* Write in small blocks */
len = msgs[i].len - 1;
k = 1;

2
drivers/media/pci/intel/ipu3/ipu3-cio2.c
View File

@ -264,7 +264,7 @@ static void cio2_fbpt_exit(struct cio2_queue *q, struct device *dev)
*/
/*
* shift for keeping value range suitable for 32-bit integer arithmetics
* shift for keeping value range suitable for 32-bit integer arithmetic
*/
#define LIMIT_SHIFT 8

2
drivers/media/pci/ivtv/ivtv-yuv.c
View File

@ -110,7 +110,7 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
/*
* Inherit the -EFAULT from rc's
* initialization, but allow it to be
* overriden by uv_pages above if it was an
* overridden by uv_pages above if it was an
* actual errno.
*/
} else {

2
drivers/media/pci/meye/meye.h
View File

@ -281,7 +281,7 @@ struct meye_grab_buffer {
unsigned long sequence; /* sequence number */
};
/* size of kfifos containings buffer indices */
/* size of kfifos containing buffer indices */
#define MEYE_QUEUE_SIZE MEYE_MAX_BUFNBRS
/* Motion Eye device structure */

2
drivers/media/pci/ngene/ngene-core.c
View File

@ -1014,7 +1014,7 @@ static int FillTSIdleBuffer(struct SRingBufferDescriptor *pIdleBuffer,
/* Point to first buffer entry */
struct SBufferHeader *Cur = pRingBuffer->Head;
int i;
/* Loop thru all buffer and set Buffer 2 pointers to TSIdlebuffer */
/* Loop through all buffer and set Buffer 2 pointers to TSIdlebuffer */
for (i = 0; i < n; i++) {
Cur->Buffer2 = pIdleBuffer->Head->Buffer1;
Cur->scList2 = pIdleBuffer->Head->scList1;

2
drivers/media/pci/pt3/pt3.h
View File

@ -76,7 +76,7 @@ struct xfer_desc {
u32 addr_l; /* bus address of target data buffer */
u32 addr_h;
u32 size;
u32 next_l; /* bus adddress of the next xfer_desc */
u32 next_l; /* bus address of the next xfer_desc */
u32 next_h;
};

2
drivers/media/pci/saa7134/saa7134-cards.c
View File

@ -6423,7 +6423,7 @@ struct pci_device_id saa7134_pci_tbl[] = {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5168,
.subdevice = 0x3502, /* whats the difference to 0x3306 ?*/
.subdevice = 0x3502, /* what's the difference to 0x3306 ?*/
.driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,

4
drivers/media/pci/saa7146/mxb.c
View File

@ -399,7 +399,7 @@ static int mxb_init_done(struct saa7146_dev* dev)
/* check if the saa7740 (aka 'sound arena module') is present
on the mxb. if so, we must initialize it. due to lack of
informations about the saa7740, the values were reverse
information about the saa7740, the values were reverse
engineered. */
msg.addr = 0x1b;
msg.flags = 0;
@ -495,7 +495,7 @@ static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
input_port_selection[input].hps_sync);
/* prepare switching of tea6415c and saa7111a;
have a look at the 'background'-file for further informations */
have a look at the 'background'-file for further information */
switch (input) {
case TUNER:
i = SAA7115_COMPOSITE0;

2
drivers/media/pci/saa7164/saa7164-api.c
View File

@ -749,7 +749,7 @@ int saa7164_api_initialize_dif(struct saa7164_port *port)
if (port->type == SAA7164_MPEG_ENCODER) {
/* Pick any analog standard to init the diff.
* we'll come back during encoder_init'
* and set the correct standard if requried.
* and set the correct standard if required.
*/
std = V4L2_STD_NTSC;
} else

4
drivers/media/pci/saa7164/saa7164-cards.c
View File

@ -685,7 +685,7 @@ struct saa7164_subid saa7164_subids[] = {
.subvendor = 0x0070,
.subdevice = 0xf111,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2255,
/* Prototype card left here for documenation purposes.
/* Prototype card left here for documentation purposes.
.card = SAA7164_BOARD_HAUPPAUGE_HVR2255proto,
*/
}, {
@ -866,7 +866,7 @@ void saa7164_card_setup(struct saa7164_dev *dev)
* access to I2C. Instead we have to communicate through the device f/w for
* register access to 'processing units'. Each unit has a unique
* id, regardless of how the physical implementation occurs across
* the three physical i2c busses. The being said if we want leverge of
* the three physical i2c buses. The being said if we want leverge of
* the existing kernel drivers for tuners and demods we have to 'speak i2c',
* to this bridge implements 3 virtual i2c buses. This is a helper function
* for those.

4
drivers/media/pci/saa7164/saa7164-core.c
View File

@ -157,7 +157,7 @@ static void saa7164_ts_verifier(struct saa7164_buffer *buf)
}
/* Only report errors if we've been through this function atleast
/* Only report errors if we've been through this function at least
* once already and the cached cc values are primed. First time through
* always generates errors.
*/
@ -1020,7 +1020,7 @@ static int saa7164_dev_setup(struct saa7164_dev *dev)
dev->bmmio = (u8 __iomem *)dev->lmmio;
dev->bmmio2 = (u8 __iomem *)dev->lmmio2;
/* Inerrupt and ack register locations offset of bmmio */
/* Interrupt and ack register locations offset of bmmio */
dev->int_status = 0x183000 + 0xf80;
dev->int_ack = 0x183000 + 0xf90;

2
drivers/media/pci/saa7164/saa7164-fw.c
View File

@ -409,7 +409,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
(version & 0x0000001f),
(version & 0xffff0000) >> 16);
/* Load the firmwware from the disk if required */
/* Load the firmware from the disk if required */
if (version == 0) {
printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n",

4
drivers/media/pci/solo6x10/solo6x10-disp.c
View File

@ -71,7 +71,7 @@ static void solo_vin_config(struct solo_dev *solo_dev)
solo_reg_write(solo_dev, SOLO_VI_CH_FORMAT,
SOLO_VI_FD_SEL_MASK(0) | SOLO_VI_PROG_MASK(0));
/* On 6110, initialize mozaic darkness stength */
/* On 6110, initialize mozaic darkness strength */
if (solo_dev->type == SOLO_DEV_6010)
solo_reg_write(solo_dev, SOLO_VI_FMT_CFG, 0);
else
@ -230,7 +230,7 @@ int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch,
}
/* First 8k is motion flag (512 bytes * 16). Following that is an 8k+8k
* threshold and working table for each channel. Atleast that's what the
* threshold and working table for each channel. At least that's what the
* spec says. However, this code (taken from rdk) has some mystery 8k
* block right after the flag area, before the first thresh table. */
static void solo_motion_config(struct solo_dev *solo_dev)

2
drivers/media/pci/sta2x11/sta2x11_vip.c
View File

@ -110,7 +110,7 @@ static inline struct vip_buffer *to_vip_buffer(struct vb2_v4l2_buffer *vb2)
* @std: video standard (e.g. PAL/NTSC)
* @input: input line for video signal ( 0 or 1 )
* @disabled: Device is in power down state
* @slock: for excluse acces of registers
* @slock: for excluse access of registers
* @vb_vidq: queue maintained by videobuf2 layer
* @buffer_list: list of buffer in use
* @sequence: sequence number of acquired buffer

6
drivers/media/pci/ttpci/av7110.c
View File

@ -2313,7 +2313,7 @@ static int frontend_init(struct av7110 *av7110)
* (n in defined in the RPS_THRESH1 counter threshold)
* I think HS is raised high on the beginning of the n-th line
* and remains high until this n-th line that triggered
* it is completely received. When the receiption of n-th line
* it is completely received. When the reception of n-th line
* ends, HS is lowered.
*
* To transmit data over DMA, 7146 needs changing state at
@ -2347,7 +2347,7 @@ static int frontend_init(struct av7110 *av7110)
* hardware debug note: a working budget card (including budget patch)
* with vpeirq() interrupt setup in mode "0x90" (every 64K) will
* generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
* and that means 3*25=75 Hz of interrupt freqency, as seen by
* and that means 3*25=75 Hz of interrupt frequency, as seen by
* watch cat /proc/interrupts
*
* If this frequency is 3x lower (and data received in the DMA
@ -2356,7 +2356,7 @@ static int frontend_init(struct av7110 *av7110)
* this means VSYNC line is not connected in the hardware.
* (check soldering pcb and pins)
* The same behaviour of missing VSYNC can be duplicated on budget
* cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
* cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
*/
static int av7110_attach(struct saa7146_dev* dev,
struct saa7146_pci_extension_data *pci_ext)

2
drivers/media/pci/tw68/tw68-video.c
View File

@ -446,7 +446,7 @@ static void tw68_buf_queue(struct vb2_buffer *vb)
/*
* buffer_prepare
*
* Set the ancilliary information into the buffer structure. This
* Set the ancillary information into the buffer structure. This
* includes generating the necessary risc program if it hasn't already
* been done for the current buffer format.
* The structure fh contains the details of the format requested by the