redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

sbs-battery: make writes to ManufacturerAccess optional 

According to the Smart Battery Data Specification, the use
of ManufacturerAcess (register 0x0) is implementation-defined.
It appears that some batteries use writes to this register
in order to implement certain functionality, but others may
simply NAK all writes to it. As a result, write failures to
ManufacturerAccess should not be used as an indicator of
battery presence, nor as a failure to enter sleep mode.

The failed write access was seen with SANYO AP13J3K.

Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
hifive-unleashed-5.1
Guenter Roeck 2016-09-08 19:10:00 -07:00 committed by Sebastian Reichel
parent 0610735928
commit 17c6d3979e
1 changed files with 15 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
drivers/power/supply/sbs-battery.c
View File

@ -317,21 +317,22 @@ static int sbs_get_battery_presence_and_health(
return ret;
}
/* Write to ManufacturerAccess with
* ManufacturerAccess command and then
* read the status */
ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_STATUS);
/*
* Write to ManufacturerAccess with ManufacturerAccess command
* and then read the status. Do not check for error on the write
* since not all batteries implement write access to this command,
* while others mandate it.
*/
sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_STATUS);
ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
if (ret < 0) {
if (psp == POWER_SUPPLY_PROP_PRESENT)
val->intval = 0; /* battery removed */
return ret;
}
ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
if (ret < 0)
return ret;
if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value ||
ret > sbs_data[REG_MANUFACTURER_DATA].max_value) {
val->intval = 0;
@ -882,16 +883,16 @@ static int sbs_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct sbs_info *chip = i2c_get_clientdata(client);
s32 ret;
if (chip->poll_time > 0)
cancel_delayed_work_sync(&chip->work);
/* write to manufacturer access with sleep command */
ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
/*
* Write to manufacturer access with sleep command.
* Support is manufacturer dependend, so ignore errors.
*/
sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_SLEEP);
if (chip->is_present && ret < 0)
return ret;
return 0;
}