ARM: mach-imx/mx27_3ds: Add LCD support
On mx27_3ds board there is a l4f00242t03 LCD that is controlled via CSPI1. Add support for CSPI1 and LCD. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>hifive-unleashed-5.1
Fabio Estevam
Sascha Hauer
parent
f9e9fc2736
commit
1abcb4cca3
|
|
@ -278,6 +278,7 @@ config MACH_MX27_3DS
|
|||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@
|
|||
#include <linux/mfd/mc13783.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/spi/l4f00242t03.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
|
@ -47,7 +48,10 @@
|
|||
#define SPI2_SS0 IMX_GPIO_NR(4, 21)
|
||||
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28))
|
||||
#define PMIC_INT IMX_GPIO_NR(3, 14)
|
||||
#define SPI1_SS0 IMX_GPIO_NR(4, 28)
|
||||
#define SD1_CD IMX_GPIO_NR(2, 26)
|
||||
#define LCD_RESET IMX_GPIO_NR(1, 3)
|
||||
#define LCD_ENABLE IMX_GPIO_NR(1, 31)
|
||||
|
||||
static const int mx27pdk_pins[] __initconst = {
|
||||
/* UART1 */
|
||||
|
|
@ -96,6 +100,12 @@ static const int mx27pdk_pins[] __initconst = {
|
|||
PE2_PF_USBOTG_DIR,
|
||||
PE24_PF_USBOTG_CLK,
|
||||
PE25_PF_USBOTG_DATA7,
|
||||
/* CSPI1 */
|
||||
PD31_PF_CSPI1_MOSI,
|
||||
PD30_PF_CSPI1_MISO,
|
||||
PD29_PF_CSPI1_SCLK,
|
||||
PD25_PF_CSPI1_RDY,
|
||||
SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
|
||||
/* CSPI2 */
|
||||
PD22_PF_CSPI2_SCLK,
|
||||
PD23_PF_CSPI2_MISO,
|
||||
|
|
@ -106,6 +116,31 @@ static const int mx27pdk_pins[] __initconst = {
|
|||
PD18_PF_I2C_CLK,
|
||||
/* PMIC INT */
|
||||
PMIC_INT | GPIO_GPIO | GPIO_IN,
|
||||
/* LCD */
|
||||
PA5_PF_LSCLK,
|
||||
PA6_PF_LD0,
|
||||
PA7_PF_LD1,
|
||||
PA8_PF_LD2,
|
||||
PA9_PF_LD3,
|
||||
PA10_PF_LD4,
|
||||
PA11_PF_LD5,
|
||||
PA12_PF_LD6,
|
||||
PA13_PF_LD7,
|
||||
PA14_PF_LD8,
|
||||
PA15_PF_LD9,
|
||||
PA16_PF_LD10,
|
||||
PA17_PF_LD11,
|
||||
PA18_PF_LD12,
|
||||
PA19_PF_LD13,
|
||||
PA20_PF_LD14,
|
||||
PA21_PF_LD15,
|
||||
PA22_PF_LD16,
|
||||
PA23_PF_LD17,
|
||||
PA28_PF_HSYNC,
|
||||
PA29_PF_VSYNC,
|
||||
PA30_PF_CONTRAST,
|
||||
LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
|
||||
LCD_RESET | GPIO_GPIO | GPIO_OUT,
|
||||
};
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
|
|
@ -262,6 +297,13 @@ static struct mc13xxx_platform_data mc13783_pdata = {
|
|||
};
|
||||
|
||||
/* SPI */
|
||||
static int spi1_chipselect[] = {SPI1_SS0};
|
||||
|
||||
static const struct spi_imx_master spi1_pdata __initconst = {
|
||||
.chipselect = spi1_chipselect,
|
||||
.num_chipselect = ARRAY_SIZE(spi1_chipselect),
|
||||
};
|
||||
|
||||
static int spi2_chipselect[] = {SPI2_SS0};
|
||||
|
||||
static const struct spi_imx_master spi2_pdata __initconst = {
|
||||
|
|
@ -269,6 +311,46 @@ static const struct spi_imx_master spi2_pdata __initconst = {
|
|||
.num_chipselect = ARRAY_SIZE(spi2_chipselect),
|
||||
};
|
||||
|
||||
static struct imx_fb_videomode mx27_3ds_modes[] = {
|
||||
{ /* 480x640 @ 60 Hz */
|
||||
.mode = {
|
||||
.name = "Epson-VGA",
|
||||
.refresh = 60,
|
||||
.xres = 480,
|
||||
.yres = 640,
|
||||
.pixclock = 41701,
|
||||
.left_margin = 20,
|
||||
.right_margin = 41,
|
||||
.upper_margin = 10,
|
||||
.lower_margin = 5,
|
||||
.hsync_len = 20,
|
||||
.vsync_len = 10,
|
||||
.sync = FB_SYNC_OE_ACT_HIGH |
|
||||
FB_SYNC_CLK_INVERT,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
},
|
||||
.bpp = 16,
|
||||
.pcr = 0xFAC08B82,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
|
||||
.mode = mx27_3ds_modes,
|
||||
.num_modes = ARRAY_SIZE(mx27_3ds_modes),
|
||||
.pwmr = 0x00A903FF,
|
||||
.lscr1 = 0x00120300,
|
||||
.dmacr = 0x00020010,
|
||||
};
|
||||
|
||||
/* LCD */
|
||||
static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = {
|
||||
.reset_gpio = LCD_RESET,
|
||||
.data_enable_gpio = LCD_ENABLE,
|
||||
.core_supply = "lcd_2v8",
|
||||
.io_supply = "vdd_lcdio",
|
||||
};
|
||||
|
||||
static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
|
||||
{
|
||||
.modalias = "mc13783",
|
||||
|
|
@ -278,6 +360,12 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
|
|||
.platform_data = &mc13783_pdata,
|
||||
.irq = gpio_to_irq(PMIC_INT),
|
||||
.mode = SPI_CS_HIGH,
|
||||
}, {
|
||||
.modalias = "l4f00242t03",
|
||||
.max_speed_hz = 5000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 0, /* SS0 */
|
||||
.platform_data = &mx27_3ds_lcd_pdata,
|
||||
},
|
||||
};
|
||||
|
||||
|
|
@ -311,12 +399,14 @@ static void __init mx27pdk_init(void)
|
|||
imx27_add_fsl_usb2_udc(&otg_device_pdata);
|
||||
|
||||
imx27_add_spi_imx1(&spi2_pdata);
|
||||
imx27_add_spi_imx0(&spi1_pdata);
|
||||
spi_register_board_info(mx27_3ds_spi_devs,
|
||||
ARRAY_SIZE(mx27_3ds_spi_devs));
|
||||
|
||||
if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
|
||||
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
|
||||
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
|
||||
imx27_add_imx_fb(&mx27_3ds_fb_data);
|
||||
}
|
||||
|
||||
static void __init mx27pdk_timer_init(void)
|
||||
|
|
|
|||
Loading…
Reference in New Issue