redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

qlge: use ethtool set_phys_id 

This is a stab at replacing old ethtool phys_id with set_phys_id
on the Qlogic 10Gb driver. Compile tested only.

Not sure if set_led_cfg will flash continuously, or needs
to be replaced by ETHTOOL_ID_ON/ETHTOOL_ID_OFF

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hifive-unleashed-5.1
stephen hemminger 2011-04-06 13:47:50 +00:00 committed by David S. Miller
parent 127fe533ae
commit 1b3291241a
1 changed files with 19 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
drivers/net/qlge/qlge_ethtool.c
View File

@ -412,31 +412,31 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
return 0;
}
static int ql_phys_id(struct net_device *ndev, u32 data)
static int ql_set_phys_id(struct net_device *ndev,
enum ethtool_phys_id_state state)
{
struct ql_adapter *qdev = netdev_priv(ndev);
u32 led_reg, i;
int status;
/* Save the current LED settings */
status = ql_mb_get_led_cfg(qdev);
if (status)
return status;
led_reg = qdev->led_config;
switch (state) {
case ETHTOOL_ID_ACTIVE:
/* Save the current LED settings */
if (ql_mb_get_led_cfg(qdev))
return -EIO;
/* Start blinking the led */
if (!data || data > 300)
data = 300;
for (i = 0; i < (data * 10); i++)
/* Start blinking */
ql_mb_set_led_cfg(qdev, QL_LED_BLINK);
return 0;
/* Restore LED settings */
status = ql_mb_set_led_cfg(qdev, led_reg);
if (status)
return status;
case ETHTOOL_ID_INACTIVE:
/* Restore LED settings */
if (ql_mb_set_led_cfg(qdev, qdev->led_config))
return -EIO;
return 0;
return 0;
default:
return -EINVAL;
}
}
static int ql_start_loopback(struct ql_adapter *qdev)
@ -703,7 +703,7 @@ const struct ethtool_ops qlge_ethtool_ops = {
.get_msglevel = ql_get_msglevel,
.set_msglevel = ql_set_msglevel,
.get_link = ethtool_op_get_link,
.phys_id = ql_phys_id,
.set_phys_id = ql_set_phys_id,
.self_test = ql_self_test,
.get_pauseparam = ql_get_pauseparam,
.set_pauseparam = ql_set_pauseparam,