redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

extcon: arizona: Support direct microphone measurement via HPDET 

With some GPIO control it is possible to detect microphones in a wider
range of configurations by directly measuring the microphone impedance
when the HPDET method cannot distinguish between the behaviour of the
two grounds. Allow a GPIO to be provided in platform data and use it to
implement this behaviour.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
hifive-unleashed-5.1
Mark Brown 2013-01-11 08:55:54 +09:00 committed by Chanwoo Choi
parent dd235eea4e
commit 1eda6aa7ce
2 changed files with 48 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
drivers/extcon/extcon-arizona.c
View File

@ -56,7 +56,7 @@ struct arizona_extcon_info {
bool hpdet_active;
int num_hpdet_res;
unsigned int hpdet_res[2];
unsigned int hpdet_res[3];
bool mic;
bool detecting;
@ -313,6 +313,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
{
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
int ret;
/*
@ -338,9 +339,27 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC,
~info->micd_modes[0].src);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, 0);
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
return -EAGAIN;
}
/* Only check the mic directly if we didn't already ID it */
if (id_gpio && info->num_hpdet_res == 2 &&
!((info->hpdet_res[0] > info->hpdet_res[1] * 2))) {
dev_dbg(arizona->dev, "Measuring mic\n");
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK |
ARIZONA_ACCDET_SRC,
ARIZONA_ACCDET_MODE_HPR |
info->micd_modes[0].src);
gpio_set_value_cansleep(id_gpio, 1);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
@ -348,10 +367,16 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
}
/* OK, got both. Now, compare... */
dev_dbg(arizona->dev, "HPDET measured %d %d\n",
info->hpdet_res[0], info->hpdet_res[1]);
dev_dbg(arizona->dev, "HPDET measured %d %d %d\n",
info->hpdet_res[0], info->hpdet_res[1],
info->hpdet_res[2]);
if (info->hpdet_res[0] > info->hpdet_res[1] * 2) {
/*
* Either the two grounds measure differently or we
* measure the mic as high impedance.
*/
if ((info->hpdet_res[0] > info->hpdet_res[1] * 2) ||
(id_gpio && info->hpdet_res[2] > 10)) {
dev_dbg(arizona->dev, "Detected mic\n");
info->mic = true;
ret = extcon_set_cable_state_(&info->edev,
@ -382,6 +407,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
int report = ARIZONA_CABLE_HEADPHONE;
int ret, reading;
@ -446,6 +472,8 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
dev_warn(arizona->dev, "Failed to undo magic: %d\n", ret);
done:
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
/* Revert back to MICDET mode */
regmap_update_bits(arizona->regmap,
@ -854,6 +882,18 @@ static int arizona_extcon_probe(struct platform_device *pdev)
}
}
if (arizona->pdata.hpdet_id_gpio > 0) {
ret = devm_gpio_request_one(&pdev->dev,
arizona->pdata.hpdet_id_gpio,
GPIOF_OUT_INIT_LOW,
"HPDET");
if (ret != 0) {
dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
arizona->pdata.hpdet_id_gpio, ret);
goto err_register;
}
}
if (arizona->pdata.micd_bias_start_time)
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_BIAS_STARTTIME_MASK,

3
include/linux/mfd/arizona/pdata.h
View File

@ -102,6 +102,9 @@ struct arizona_pdata {
/** Use the headphone detect circuit to identify the accessory */
bool hpdet_acc_id;
/** GPIO used for mic isolation with HPDET */
int hpdet_id_gpio;
/** GPIO for mic detection polarity */
int micd_pol_gpio;