arm: mach-orion5x: use plus instead of or for address definitions
Since we are going to use IOMEM() to define many base virtual addresses, we can no longer use binary or to define the individual register addresses ("binary or" arithmetic on pointers is not allowed). Instead, use the more conventional plus operator to do so. The binary or operators were actually not useful because the low-order bits of the base address were always zero, so the usage of the binary or operators was effectively identical to a plus operator. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
parent
5ae9f5dbb3
commit
2332656aec
|
@ -13,27 +13,27 @@
|
|||
|
||||
#include <mach/orion5x.h>
|
||||
|
||||
#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100)
|
||||
#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100)
|
||||
|
||||
#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
|
||||
#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104)
|
||||
|
||||
#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
|
||||
#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108)
|
||||
#define WDT_RESET_OUT_EN 0x0002
|
||||
|
||||
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
|
||||
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c)
|
||||
|
||||
#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110)
|
||||
#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110)
|
||||
|
||||
#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C)
|
||||
#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C)
|
||||
|
||||
#define WDT_INT_REQ 0x0008
|
||||
|
||||
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
|
||||
|
||||
#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200)
|
||||
#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200)
|
||||
|
||||
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
|
||||
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204)
|
||||
|
||||
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
|
||||
#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
|
||||
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE + 0x300)
|
||||
#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE + 0x300)
|
||||
#endif
|
||||
|
|
|
@ -68,42 +68,42 @@
|
|||
* Orion Registers Map
|
||||
******************************************************************************/
|
||||
|
||||
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
|
||||
#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500)
|
||||
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
|
||||
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
|
||||
#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
|
||||
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x00000)
|
||||
#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE + 0x1500)
|
||||
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x10000)
|
||||
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x10000)
|
||||
#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE + (x))
|
||||
#define GPIO_VIRT_BASE ORION5X_DEV_BUS_REG(0x0100)
|
||||
#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
|
||||
#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
|
||||
#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
|
||||
#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
|
||||
#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
|
||||
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
|
||||
#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x0600)
|
||||
#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x1000)
|
||||
#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2000)
|
||||
#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2000)
|
||||
#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE + 0x2100)
|
||||
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE + 0x2100)
|
||||
|
||||
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
|
||||
#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
|
||||
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x20000)
|
||||
#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x20000)
|
||||
|
||||
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
|
||||
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x30000)
|
||||
|
||||
#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000)
|
||||
#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x40000)
|
||||
|
||||
#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000)
|
||||
#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
|
||||
#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x50000)
|
||||
#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x50000)
|
||||
|
||||
#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900)
|
||||
#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900)
|
||||
#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x60900)
|
||||
#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x60900)
|
||||
|
||||
#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
|
||||
#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
|
||||
#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x70000)
|
||||
#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x70000)
|
||||
|
||||
#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
|
||||
#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
|
||||
#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x80000)
|
||||
#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x80000)
|
||||
|
||||
#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000)
|
||||
#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x90000)
|
||||
|
||||
#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
|
||||
#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
|
||||
#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0xa0000)
|
||||
#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0xa0000)
|
||||
|
||||
/*******************************************************************************
|
||||
* Device Bus Registers
|
||||
|
|
|
@ -198,7 +198,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
|
|||
/*****************************************************************************
|
||||
* PCI controller
|
||||
****************************************************************************/
|
||||
#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
|
||||
#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE + (x))
|
||||
#define PCI_MODE ORION5X_PCI_REG(0xd00)
|
||||
#define PCI_CMD ORION5X_PCI_REG(0xc00)
|
||||
#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14)
|
||||
|
|
Loading…
Reference in a new issue