redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'depends/rmk/for-linus' into next/soc

Browse source 
Conflicts:
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/common.c
This commit is contained in:
Arnd Bergmann 2012-01-07 20:53:13 +00:00
parent e195ffbe45 7b9dd47136
commit 23c4c1c7b0
1051 changed files with 9692 additions and 9218 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
Documentation/ABI/testing/sysfs-bus-rbd
View file

@ -57,13 +57,6 @@ create_snap
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
rollback_snap
Rolls back data to the specified snapshot. This goes over the entire
list of rados blocks and sends a rollback command to each.
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
snap_*
A directory per each snapshot

16
Documentation/virtual/kvm/api.txt
View file

@ -1100,6 +1100,15 @@ emulate them efficiently. The fields in each entry are defined as follows:
eax, ebx, ecx, edx: the values returned by the cpuid instruction for
this function/index combination
The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned
as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC
support. Instead it is reported via
ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER)
if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the
feature in userspace, then you can enable the feature for KVM_SET_CPUID2.
4.47 KVM_PPC_GET_PVINFO
Capability: KVM_CAP_PPC_GET_PVINFO
@ -1151,6 +1160,13 @@ following flags are specified:
/* Depends on KVM_CAP_IOMMU */
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure
isolation of the device. Usages not specifying this flag are deprecated.
Only PCI header type 0 devices with PCI BAR resources are supported by
device assignment. The user requesting this ioctl must have read/write
access to the PCI sysfs resource files associated with the device.
4.49 KVM_DEASSIGN_PCI_DEVICE
Capability: KVM_CAP_DEVICE_DEASSIGNMENT

24
MAINTAINERS
View file

@ -1124,13 +1124,6 @@ S: Supported
F: arch/arm/mach-shmobile/
F: drivers/sh/
ARM/TELECHIPS ARM ARCHITECTURE
M: "Hans J. Koch" <hjk@hansjkoch.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/plat-tcc/
F: arch/arm/mach-tcc8k/
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -2700,7 +2693,7 @@ FIREWIRE SUBSYSTEM
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://ieee1394.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394.git
S: Maintained
F: drivers/firewire/
F: include/linux/firewire*.h
@ -3101,6 +3094,7 @@ F: include/linux/hid*
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Maintained
F: Documentation/timers/
F: kernel/hrtimer.c
@ -3610,7 +3604,7 @@ F: net/irda/
IRQ SUBSYSTEM
M: Thomas Gleixner <tglx@linutronix.de>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: kernel/irq/
ISAPNP
@ -4098,7 +4092,7 @@ F: drivers/hwmon/lm90.c
LOCKDEP AND LOCKSTAT
M: Peter Zijlstra <peterz@infradead.org>
M: Ingo Molnar <mingo@redhat.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking
S: Maintained
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
@ -4280,7 +4274,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: Documentation/dvb/
F: Documentation/video4linux/
F: Documentation/DocBook/media/
F: drivers/media/
F: drivers/staging/media/
F: include/media/
F: include/linux/dvb/
F: include/linux/videodev*.h
@ -5086,6 +5082,7 @@ M: Peter Zijlstra <a.p.zijlstra@chello.nl>
M: Paul Mackerras <paulus@samba.org>
M: Ingo Molnar <mingo@elte.hu>
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Supported
F: kernel/events/*
F: include/linux/perf_event.h
@ -5165,6 +5162,7 @@ F: drivers/scsi/pm8001/
POSIX CLOCKS and TIMERS
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: fs/timerfd.c
F: include/linux/timer*
@ -5680,6 +5678,7 @@ F: drivers/dma/dw_dmac.c
TIMEKEEPING, NTP
M: John Stultz <johnstul@us.ibm.com>
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: include/linux/clocksource.h
F: include/linux/time.h
@ -5704,6 +5703,7 @@ F: drivers/watchdog/sc1200wdt.c
SCHEDULER
M: Ingo Molnar <mingo@elte.hu>
M: Peter Zijlstra <peterz@infradead.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
F: kernel/sched*
F: include/linux/sched.h
@ -6631,7 +6631,7 @@ TRACING
M: Steven Rostedt <rostedt@goodmis.org>
M: Frederic Weisbecker <fweisbec@gmail.com>
M: Ingo Molnar <mingo@redhat.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Maintained
F: Documentation/trace/ftrace.txt
F: arch/*/*/*/ftrace.h
@ -7381,7 +7381,7 @@ M: Thomas Gleixner <tglx@linutronix.de>
M: Ingo Molnar <mingo@redhat.com>
M: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
S: Maintained
F: Documentation/x86/
F: arch/x86/

2
Makefile
View file

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc7
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

61
arch/arm/Kconfig
View file

@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H
be avoided when possible.
config PHYS_OFFSET
hex "Physical address of main memory"
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
default DRAM_BASE if !MMU
help
Please provide the physical address corresponding to the
location of main memory in your system.
@ -257,6 +258,7 @@ config ARCH_INTEGRATOR
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
@ -340,10 +342,12 @@ config ARCH_HIGHBANK
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select CACHE_L2X0
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_SMP
select USE_OF
help
Support for the Calxeda Highbank SoC based boards.
@ -361,6 +365,7 @@ config ARCH_CNS3XXX
select CPU_V6K
select GENERIC_CLOCKEVENTS
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
@ -381,6 +386,7 @@ config ARCH_PRIMA2
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select ZONE_DMA
help
@ -633,6 +639,8 @@ config ARCH_TEGRA
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SCHED_CLOCK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_CPUFREQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
@ -702,7 +710,9 @@ config ARCH_SHMOBILE
select HAVE_CLK
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select HAVE_SMP
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
@ -867,16 +877,6 @@ config ARCH_SHARK
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
config ARCH_TCC_926
bool "Telechips TCC ARM926-based systems"
select CLKSRC_MMIO
select CPU_ARM926T
select HAVE_CLK
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
help
Support for Telechips TCC ARM926-based systems.
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
@ -904,6 +904,8 @@ config ARCH_U8500
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
Support for ST-Ericsson's Ux500 architecture
@ -914,6 +916,7 @@ config ARCH_NOMADIK
select CPU_ARM926T
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
@ -973,6 +976,7 @@ config ARCH_ZYNQ
select ARM_GIC
select ARM_AMBA
select ICST
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
help
Support for Xilinx Zynq ARM Cortex A9 Platform
@ -1059,8 +1063,6 @@ source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/plat-tcc/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
@ -1125,6 +1127,11 @@ config ARM_TIMER_SP804
source arch/arm/mm/Kconfig
config ARM_NR_BANKS
int
default 16 if ARCH_EP93XX
default 8
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
@ -1245,7 +1252,7 @@ config PL310_ERRATA_588369
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
depends on CPU_V7 && SMP
depends on CPU_V7
help
This option enables the workaround for the 720789 Cortex-A9 (prior to
r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
@ -1281,7 +1288,7 @@ config ARM_ERRATA_743622
config ARM_ERRATA_751472
bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
depends on CPU_V7 && SMP
depends on CPU_V7
help
This option enables the workaround for the 751472 Cortex-A9 (prior
to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
@ -1434,14 +1441,20 @@ menu "Kernel Features"
source "kernel/time/Kconfig"
config HAVE_SMP
bool
help
This option should be selected by machines which have an SMP-
capable CPU.
The only effect of this option is to make the SMP-related
options available to the user for configuration.
config SMP
bool "Symmetric Multi-Processing"
depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
depends on HAVE_SMP
depends on MMU
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
@ -1559,6 +1572,16 @@ config LOCAL_TIMERS
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 350 if ARCH_U8500
default 0
help
Maximum number of GPIOs in the system.
If unsure, leave the default value.
source kernel/Kconfig.preempt
config HZ

2
arch/arm/Makefile
View file

@ -184,7 +184,6 @@ machine-$(CONFIG_ARCH_EXYNOS4) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
@ -204,7 +203,6 @@ machine-$(CONFIG_ARCH_ZYNQ) := zynq
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_ARCH_ZYNQ) := versatile
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik

3
arch/arm/boot/compressed/Makefile
View file

@ -126,7 +126,8 @@ ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
# Supply kernel BSS size to the decompressor via a linker symbol.
KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
awk 'END{print $$3}')
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)

124
arch/arm/common/pl330.c
View file

@ -221,17 +221,6 @@
*/
#define MCODE_BUFF_PER_REQ 256
/*
* Mark a _pl330_req as free.
* We do it by writing DMAEND as the first instruction
* because no valid request is going to have DMAEND as
* its first instruction to execute.
*/
#define MARK_FREE(req) do { \
_emit_END(0, (req)->mc_cpu); \
(req)->mc_len = 0; \
} while (0)
/* If the _pl330_req is available to the client */
#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
@ -301,8 +290,10 @@ struct pl330_thread {
struct pl330_dmac *dmac;
/* Only two at a time */
struct _pl330_req req[2];
/* Index of the last submitted request */
/* Index of the last enqueued request */
unsigned lstenq;
/* Index of the last submitted request or -1 if the DMA is stopped */
int req_running;
};
enum pl330_dmac_state {
@ -778,6 +769,22 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
writel(0, regs + DBGCMD);
}
/*
* Mark a _pl330_req as free.
* We do it by writing DMAEND as the first instruction
* because no valid request is going to have DMAEND as
* its first instruction to execute.
*/
static void mark_free(struct pl330_thread *thrd, int idx)
{
struct _pl330_req *req = &thrd->req[idx];
_emit_END(0, req->mc_cpu);
req->mc_len = 0;
thrd->req_running = -1;
}
static inline u32 _state(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
@ -836,31 +843,6 @@ static inline u32 _state(struct pl330_thread *thrd)
}
}
/* If the request 'req' of thread 'thrd' is currently active */
static inline bool _req_active(struct pl330_thread *thrd,
struct _pl330_req *req)
{
void __iomem *regs = thrd->dmac->pinfo->base;
u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
if (IS_FREE(req))
return false;
return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
}
/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
static inline unsigned _thrd_active(struct pl330_thread *thrd)
{
if (_req_active(thrd, &thrd->req[0]))
return 1; /* First req active */
if (_req_active(thrd, &thrd->req[1]))
return 2; /* Second req active */
return 0;
}
static void _stop(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
@ -892,17 +874,22 @@ static bool _trigger(struct pl330_thread *thrd)
struct _arg_GO go;
unsigned ns;
u8 insn[6] = {0, 0, 0, 0, 0, 0};
int idx;
/* Return if already ACTIVE */
if (_state(thrd) != PL330_STATE_STOPPED)
return true;
if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
req = &thrd->req[1 - thrd->lstenq];
else if (!IS_FREE(&thrd->req[thrd->lstenq]))
req = &thrd->req[thrd->lstenq];
else
req = NULL;
idx = 1 - thrd->lstenq;
if (!IS_FREE(&thrd->req[idx]))
req = &thrd->req[idx];
else {
idx = thrd->lstenq;
if (!IS_FREE(&thrd->req[idx]))
req = &thrd->req[idx];
else
req = NULL;
}
/* Return if no request */
if (!req || !req->r)
@ -933,6 +920,8 @@ static bool _trigger(struct pl330_thread *thrd)
/* Only manager can execute GO */
_execute_DBGINSN(thrd, insn, true);
thrd->req_running = idx;
return true;
}
@ -1382,8 +1371,8 @@ static void pl330_dotask(unsigned long data)
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
MARK_FREE(&thrd->req[0]);
MARK_FREE(&thrd->req[1]);
mark_free(thrd, 0);
mark_free(thrd, 1);
/* Clear the reset flag */
pl330->dmac_tbd.reset_chan &= ~(1 << i);
@ -1461,14 +1450,12 @@ int pl330_update(const struct pl330_info *pi)
thrd = &pl330->channels[id];
active = _thrd_active(thrd);
if (!active) /* Aborted */
active = thrd->req_running;
if (active == -1) /* Aborted */
continue;
active -= 1;
rqdone = &thrd->req[active];
MARK_FREE(rqdone);
mark_free(thrd, active);
/* Get going again ASAP */
_start(thrd);
@ -1480,13 +1467,19 @@ int pl330_update(const struct pl330_info *pi)
/* Now that we are in no hurry, do the callbacks */
while (!list_empty(&pl330->req_done)) {
struct pl330_req *r;
rqdone = container_of(pl330->req_done.next,
struct _pl330_req, rqd);
list_del_init(&rqdone->rqd);
/* Detach the req */
r = rqdone->r;
rqdone->r = NULL;
spin_unlock_irqrestore(&pl330->lock, flags);
_callback(rqdone->r, PL330_ERR_NONE);
_callback(r, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
@ -1509,7 +1502,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
int ret = 0, active;
int ret = 0, active = thrd->req_running;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
@ -1525,28 +1518,24 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
MARK_FREE(&thrd->req[0]);
MARK_FREE(&thrd->req[1]);
mark_free(thrd, 0);
mark_free(thrd, 1);
break;
case PL330_OP_ABORT:
active = _thrd_active(thrd);
/* Make sure the channel is stopped */
_stop(thrd);
/* ABORT is only for the active req */
if (!active)
if (active == -1)
break;
active--;
thrd->req[active].r = NULL;
MARK_FREE(&thrd->req[active]);
mark_free(thrd, active);
/* Start the next */
case PL330_OP_START:
if (!_thrd_active(thrd) && !_start(thrd))
if ((active == -1) && !_start(thrd))
ret = -EIO;
break;
@ -1587,14 +1576,13 @@ int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
else
pstatus->faulting = false;
active = _thrd_active(thrd);
active = thrd->req_running;
if (!active) {
if (active == -1) {
/* Indicate that the thread is not running */
pstatus->top_req = NULL;
pstatus->wait_req = NULL;
} else {
active--;
pstatus->top_req = thrd->req[active].r;
pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
? thrd->req[1 - active].r : NULL;
@ -1659,9 +1647,9 @@ void *pl330_request_channel(const struct pl330_info *pi)
thrd->free = false;
thrd->lstenq = 1;
thrd->req[0].r = NULL;
MARK_FREE(&thrd->req[0]);
mark_free(thrd, 0);
thrd->req[1].r = NULL;
MARK_FREE(&thrd->req[1]);
mark_free(thrd, 1);
break;
}
}
@ -1767,14 +1755,14 @@ static inline void _reset_thread(struct pl330_thread *thrd)
thrd->req[0].mc_bus = pl330->mcode_bus
+ (thrd->id * pi->mcbufsz);
thrd->req[0].r = NULL;
MARK_FREE(&thrd->req[0]);
mark_free(thrd, 0);
thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+ pi->mcbufsz / 2;
thrd->req[1].mc_bus = thrd->req[0].mc_bus
+ pi->mcbufsz / 2;
thrd->req[1].r = NULL;
MARK_FREE(&thrd->req[1]);
mark_free(thrd, 1);
}
static int dmac_alloc_threads(struct pl330_dmac *pl330)

7
arch/arm/common/timer-sp.c
View file

@ -143,7 +143,6 @@ static int sp804_set_next_event(unsigned long next,
}
static struct clock_event_device sp804_clockevent = {
.shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sp804_set_mode,
.set_next_event = sp804_set_next_event,
@ -169,13 +168,9 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
clkevt_base = base;
clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
evt->name = name;
evt->irq = irq;
evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
setup_irq(irq, &sp804_timer_irq);
clockevents_register_device(evt);
clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
}

2
arch/arm/common/vic.c
View file

@ -197,8 +197,8 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
v->domain.nr_irq = 32;
#ifdef CONFIG_OF_IRQ
v->domain.of_node = of_node_get(node);
v->domain.ops = &irq_domain_simple_ops;
#endif /* CONFIG_OF */
v->domain.ops = &irq_domain_simple_ops;
irq_domain_add(&v->domain);
}

12
arch/arm/configs/imx_v4_v5_defconfig
View file

@ -18,9 +18,10 @@ CONFIG_ARCH_MXC=y
CONFIG_ARCH_IMX_V4_V5=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
CONFIG_MACH_EUKREA_CPUIMX25=y
CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
@ -72,17 +73,16 @@ CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
CONFIG_DM9000=y
CONFIG_SMC91X=y
CONFIG_SMC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_SMSC_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
@ -100,6 +100,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
@ -139,6 +140,7 @@ CONFIG_MMC=y
CONFIG_MMC_MXC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y

1
arch/arm/include/asm/bug.h
View file

@ -32,7 +32,6 @@
#define __BUG(__file, __line, __value) \
do { \
BUILD_BUG_ON(sizeof(struct bug_entry) != 12); \
asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n" \
".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
"2:\t.asciz " #__file "\n" \

48
arch/arm/include/asm/edac.h Normal file
View file

@ -0,0 +1,48 @@
/*
* Copyright 2011 Calxeda, Inc.
* Based on PPC version Copyright 2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef ASM_EDAC_H
#define ASM_EDAC_H
/*
* ECC atomic, DMA, SMP and interrupt safe scrub function.
* Implements the per arch atomic_scrub() that EDAC use for software
* ECC scrubbing. It reads memory and then writes back the original
* value, allowing the hardware to detect and correct memory errors.
*/
static inline void atomic_scrub(void *va, u32 size)
{
#if __LINUX_ARM_ARCH__ >= 6
unsigned int *virt_addr = va;
unsigned int temp, temp2;
unsigned int i;
for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
/* Very carefully read and write to memory atomically
* so we are interrupt, DMA and SMP safe.
*/
__asm__ __volatile__("\n"
"1: ldrex %0, [%2]\n"
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b\n"
: "=&r"(temp), "=&r"(temp2)
: "r"(virt_addr)
: "cc");
}
#endif
}
#endif

4
arch/arm/include/asm/gpio.h
View file

@ -1,6 +1,10 @@
#ifndef _ARCH_ARM_GPIO_H
#define _ARCH_ARM_GPIO_H
#if CONFIG_ARCH_NR_GPIO > 0
#define ARCH_NR_GPIO CONFIG_ARCH_NR_GPIO
#endif
/* not all ARM platforms necessarily support this API ... */
#include <mach/gpio.h>

17
arch/arm/include/asm/hardirq.h
View file

@ -27,23 +27,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu);
#define arch_irq_stat_cpu smp_irq_stat_cpu
#if NR_IRQS > 512
#define HARDIRQ_BITS 10
#elif NR_IRQS > 256
#define HARDIRQ_BITS 9
#else
#define HARDIRQ_BITS 8
#endif
/*
* The hardirq mask has to be large enough to have space
* for potentially all IRQ sources in the system nesting
* on a single CPU:
*/
#if (1 << HARDIRQ_BITS) < NR_IRQS
# error HARDIRQ_BITS is too low!
#endif
#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1
#endif /* __ASM_HARDIRQ_H */

1
arch/arm/include/asm/hardware/iop3xx.h
View file

@ -234,6 +234,7 @@ extern int iop3xx_get_init_atu(void);
void iop3xx_map_io(void);
void iop_init_cp6_handler(void);
void iop_init_time(unsigned long tickrate);
void iop3xx_restart(char, const char *);
static inline u32 read_tmr0(void)
{

20
arch/arm/include/asm/opcodes.h Normal file
View file

@ -0,0 +1,20 @@
/*
* arch/arm/include/asm/opcodes.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_OPCODES_H
#define __ASM_ARM_OPCODES_H
#ifndef __ASSEMBLY__
extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
#endif
#define ARM_OPCODE_CONDTEST_FAIL 0
#define ARM_OPCODE_CONDTEST_PASS 1
#define ARM_OPCODE_CONDTEST_UNCOND 2
#endif /* __ASM_ARM_OPCODES_H */

8
arch/arm/include/asm/pgtable.h
View file

@ -42,13 +42,6 @@
#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
#define VMALLOC_END 0xff000000UL
/* This is a temporary hack until shmobile's DMA area size is sorted out */
#ifdef CONFIG_ARCH_SHMOBILE
#warning "SH-Mobile's consistent DMA size conflicts with VMALLOC_END by 144MB"
#undef VMALLOC_END
#define VMALLOC_END 0xF6000000UL
#endif
#define LIBRARY_TEXT_START 0x0c000000
#ifndef __ASSEMBLY__
@ -306,6 +299,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
* We provide our own arch_get_unmapped_area to cope with VIPT caches.
*/
#define HAVE_ARCH_UNMAPPED_AREA
#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
/*
* remap a physical page `pfn' of size `size' with page protection `prot'

2
arch/arm/include/asm/processor.h
View file

@ -123,6 +123,8 @@ static inline void prefetch(const void *ptr)
#endif
#define HAVE_ARCH_PICK_MMAP_LAYOUT
#endif
#endif /* __ASM_ARM_PROCESSOR_H */

108
arch/arm/include/asm/sched_clock.h
View file

@ -8,113 +8,7 @@
#ifndef ASM_SCHED_CLOCK
#define ASM_SCHED_CLOCK
#include <linux/kernel.h>
#include <linux/types.h>
struct clock_data {
u64 epoch_ns;
u32 epoch_cyc;
u32 epoch_cyc_copy;
u32 mult;
u32 shift;
};
#define DEFINE_CLOCK_DATA(name) struct clock_data name
static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
{
return (cyc * mult) >> shift;
}
/*
* Atomically update the sched_clock epoch. Your update callback will
* be called from a timer before the counter wraps - read the current
* counter value, and call this function to safely move the epochs
* forward. Only use this from the update callback.
*/
static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask)
{
unsigned long flags;
u64 ns = cd->epoch_ns +
cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift);
/*
* Write epoch_cyc and epoch_ns in a way that the update is
* detectable in cyc_to_fixed_sched_clock().
*/
raw_local_irq_save(flags);
cd->epoch_cyc = cyc;
smp_wmb();
cd->epoch_ns = ns;
smp_wmb();
cd->epoch_cyc_copy = cyc;
raw_local_irq_restore(flags);
}
/*
* If your clock rate is known at compile time, using this will allow
* you to optimize the mult/shift loads away. This is paired with
* init_fixed_sched_clock() to ensure that your mult/shift are correct.
*/
static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd,
u32 cyc, u32 mask, u32 mult, u32 shift)
{
u64 epoch_ns;
u32 epoch_cyc;
/*
* Load the epoch_cyc and epoch_ns atomically. We do this by
* ensuring that we always write epoch_cyc, epoch_ns and
* epoch_cyc_copy in strict order, and read them in strict order.
* If epoch_cyc and epoch_cyc_copy are not equal, then we're in
* the middle of an update, and we should repeat the load.
*/
do {
epoch_cyc = cd->epoch_cyc;
smp_rmb();
epoch_ns = cd->epoch_ns;
smp_rmb();
} while (epoch_cyc != cd->epoch_cyc_copy);
return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift);
}
/*
* Otherwise, you need to use this, which will obtain the mult/shift
* from the clock_data structure. Use init_sched_clock() with this.
*/
static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd,
u32 cyc, u32 mask)
{
return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift);
}
/*
* Initialize the clock data - calculate the appropriate multiplier
* and shift. Also setup a timer to ensure that the epoch is refreshed
* at the appropriate time interval, which will call your update
* handler.
*/
void init_sched_clock(struct clock_data *, void (*)(void),
unsigned int, unsigned long);
/*
* Use this initialization function rather than init_sched_clock() if
* you're using cyc_to_fixed_sched_clock, which will warn if your
* constants are incorrect.
*/
static inline void init_fixed_sched_clock(struct clock_data *cd,
void (*update)(void), unsigned int bits, unsigned long rate,
u32 mult, u32 shift)
{
init_sched_clock(cd, update, bits, rate);
if (cd->mult != mult || cd->shift != shift) {
pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n"
"sched_clock: fix multiply/shift to avoid scheduler hiccups\n",
mult, shift, cd->mult, cd->shift);
}
}
extern void sched_clock_postinit(void);
extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
#endif

6
arch/arm/include/asm/setup.h
View file

@ -192,11 +192,7 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn }
/*
* Memory map description
*/
#ifdef CONFIG_ARCH_EP93XX
# define NR_BANKS 16
#else
# define NR_BANKS 8
#endif
#define NR_BANKS CONFIG_ARM_NR_BANKS
struct membank {
phys_addr_t start;

5
arch/arm/include/asm/swab.h
View file

@ -24,12 +24,13 @@
#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
{
__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
return x;
}
#define __arch_swab16 __arch_swab16
#define __arch_swahb32 __arch_swahb32
#define __arch_swab16(x) ((__u16)__arch_swahb32(x))
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{

1
arch/arm/include/asm/system.h
View file

@ -108,7 +108,6 @@ extern void __show_regs(struct pt_regs *);
extern int __pure cpu_architecture(void);
extern void cpu_init(void);
void arm_machine_restart(char mode, const char *cmd);
void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);

16
arch/arm/include/asm/unwind.h
View file

@ -30,14 +30,15 @@ enum unwind_reason_code {
};
struct unwind_idx {
unsigned long addr;
unsigned long addr_offset;
unsigned long insn;
};
struct unwind_table {
struct list_head list;
struct unwind_idx *start;
struct unwind_idx *stop;
const struct unwind_idx *start;
const struct unwind_idx *origin;
const struct unwind_idx *stop;
unsigned long begin_addr;
unsigned long end_addr;
};
@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
extern void unwind_table_del(struct unwind_table *tab);
extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
#ifdef CONFIG_ARM_UNWIND
extern int __init unwind_init(void);
#else
static inline int __init unwind_init(void)
{
return 0;
}
#endif
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_ARM_UNWIND

2
arch/arm/kernel/Makefile
View file

@ -13,7 +13,7 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
obj-y := elf.o entry-armv.o entry-common.o irq.o \
obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \
process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o

66
arch/arm/kernel/kprobes-test.c
View file

@ -202,6 +202,8 @@
#include <linux/slab.h>
#include <linux/kprobes.h>
#include <asm/opcodes.h>
#include "kprobes.h"
#include "kprobes-test.h"
@ -1050,65 +1052,9 @@ static int test_instance;
static unsigned long test_check_cc(int cc, unsigned long cpsr)
{
unsigned long temp;
int ret = arm_check_condition(cc << 28, cpsr);
switch (cc) {
case 0x0: /* eq */
return cpsr & PSR_Z_BIT;
case 0x1: /* ne */
return (~cpsr) & PSR_Z_BIT;
case 0x2: /* cs */
return cpsr & PSR_C_BIT;
case 0x3: /* cc */
return (~cpsr) & PSR_C_BIT;
case 0x4: /* mi */
return cpsr & PSR_N_BIT;
case 0x5: /* pl */
return (~cpsr) & PSR_N_BIT;
case 0x6: /* vs */
return cpsr & PSR_V_BIT;
case 0x7: /* vc */
return (~cpsr) & PSR_V_BIT;
case 0x8: /* hi */
cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
return cpsr & PSR_C_BIT;
case 0x9: /* ls */
cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
return (~cpsr) & PSR_C_BIT;
case 0xa: /* ge */
cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
return (~cpsr) & PSR_N_BIT;
case 0xb: /* lt */
cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
return cpsr & PSR_N_BIT;
case 0xc: /* gt */
temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
return (~temp) & PSR_N_BIT;
case 0xd: /* le */
temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
return temp & PSR_N_BIT;
case 0xe: /* al */
case 0xf: /* unconditional */
return true;
}
BUG();
return false;
return (ret != ARM_OPCODE_CONDTEST_FAIL);
}
static int is_last_scenario;
@ -1128,7 +1074,9 @@ static unsigned long test_context_cpsr(int scenario)
if (!test_case_is_thumb) {
/* Testing ARM code */
probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
int cc = current_instruction >> 28;
probe_should_run = test_check_cc(cc, cpsr) != 0;
if (scenario == 15)
is_last_scenario = true;

72
arch/arm/kernel/opcodes.c Normal file
View file

@ -0,0 +1,72 @@
/*
* linux/arch/arm/kernel/opcodes.c
*
* A32 condition code lookup feature moved from nwfpe/fpopcode.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <asm/opcodes.h>
#define ARM_OPCODE_CONDITION_UNCOND 0xf
/*
* condition code lookup table
* index into the table is test code: EQ, NE, ... LT, GT, AL, NV
*
* bit position in short is condition code: NZCV
*/
static const unsigned short cc_map[16] = {
0xF0F0, /* EQ == Z set */
0x0F0F, /* NE */
0xCCCC, /* CS == C set */
0x3333, /* CC */
0xFF00, /* MI == N set */
0x00FF, /* PL */
0xAAAA, /* VS == V set */
0x5555, /* VC */
0x0C0C, /* HI == C set && Z clear */
0xF3F3, /* LS == C clear || Z set */
0xAA55, /* GE == (N==V) */
0x55AA, /* LT == (N!=V) */
0x0A05, /* GT == (!Z && (N==V)) */
0xF5FA, /* LE == (Z || (N!=V)) */
0xFFFF, /* AL always */
0 /* NV */
};
/*
* Returns:
* ARM_OPCODE_CONDTEST_FAIL - if condition fails
* ARM_OPCODE_CONDTEST_PASS - if condition passes (including AL)
* ARM_OPCODE_CONDTEST_UNCOND - if NV condition, or separate unconditional
* opcode space from v5 onwards
*
* Code that tests whether a conditional instruction would pass its condition
* check should check that return value == ARM_OPCODE_CONDTEST_PASS.
*
* Code that tests if a condition means that the instruction would be executed
* (regardless of conditional or unconditional) should instead check that the
* return value != ARM_OPCODE_CONDTEST_FAIL.
*/
asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr)
{
u32 cc_bits = opcode >> 28;
u32 psr_cond = psr >> 28;
unsigned int ret;
if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
if ((cc_map[cc_bits] >> (psr_cond)) & 1)
ret = ARM_OPCODE_CONDTEST_PASS;
else
ret = ARM_OPCODE_CONDTEST_FAIL;
} else {
ret = ARM_OPCODE_CONDTEST_UNCOND;
}
return ret;
}
EXPORT_SYMBOL_GPL(arm_check_condition);

3
arch/arm/kernel/perf_event.c
View file

@ -639,6 +639,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = {
static int __devinit armpmu_device_probe(struct platform_device *pdev)
{
if (!cpu_pmu)
return -ENODEV;
cpu_pmu->plat_device = pdev;
return 0;
}

10
arch/arm/kernel/process.c
View file

@ -147,14 +147,8 @@ void soft_restart(unsigned long addr)
BUG();
}
void arm_machine_restart(char mode, const char *cmd)
static void null_restart(char mode, const char *cmd)
{
/* Disable interrupts first */
local_irq_disable();
local_fiq_disable();
/* Call the architecture specific reboot code. */
arch_reset(mode, cmd);
}
/*
@ -163,7 +157,7 @@ void arm_machine_restart(char mode, const char *cmd)
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
void (*arm_pm_restart)(char str, const char *cmd) = null_restart;
EXPORT_SYMBOL_GPL(arm_pm_restart);
static void do_nothing(void *unused)

118
arch/arm/kernel/sched_clock.c
View file

@ -14,61 +14,153 @@
#include <asm/sched_clock.h>
struct clock_data {
u64 epoch_ns;
u32 epoch_cyc;
u32 epoch_cyc_copy;
u32 mult;
u32 shift;
};
static void sched_clock_poll(unsigned long wrap_ticks);
static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
static void (*sched_clock_update_fn)(void);
static struct clock_data cd = {
.mult = NSEC_PER_SEC / HZ,
};
static u32 __read_mostly sched_clock_mask = 0xffffffff;
static u32 notrace jiffy_sched_clock_read(void)
{
return (u32)(jiffies - INITIAL_JIFFIES);
}
static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
{
return (cyc * mult) >> shift;
}
static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
{
u64 epoch_ns;
u32 epoch_cyc;
/*
* Load the epoch_cyc and epoch_ns atomically. We do this by
* ensuring that we always write epoch_cyc, epoch_ns and
* epoch_cyc_copy in strict order, and read them in strict order.
* If epoch_cyc and epoch_cyc_copy are not equal, then we're in
* the middle of an update, and we should repeat the load.
*/
do {
epoch_cyc = cd.epoch_cyc;
smp_rmb();
epoch_ns = cd.epoch_ns;
smp_rmb();
} while (epoch_cyc != cd.epoch_cyc_copy);
return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd.mult, cd.shift);
}
/*
* Atomically update the sched_clock epoch.
*/
static void notrace update_sched_clock(void)
{
unsigned long flags;
u32 cyc;
u64 ns;
cyc = read_sched_clock();
ns = cd.epoch_ns +
cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask,
cd.mult, cd.shift);
/*
* Write epoch_cyc and epoch_ns in a way that the update is
* detectable in cyc_to_fixed_sched_clock().
*/
raw_local_irq_save(flags);
cd.epoch_cyc = cyc;
smp_wmb();
cd.epoch_ns = ns;
smp_wmb();
cd.epoch_cyc_copy = cyc;
raw_local_irq_restore(flags);
}
static void sched_clock_poll(unsigned long wrap_ticks)
{
mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
sched_clock_update_fn();
update_sched_clock();
}
void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
unsigned int clock_bits, unsigned long rate)
void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
{
unsigned long r, w;
u64 res, wrap;
char r_unit;
sched_clock_update_fn = update;
BUG_ON(bits > 32);
WARN_ON(!irqs_disabled());
WARN_ON(read_sched_clock != jiffy_sched_clock_read);
read_sched_clock = read;
sched_clock_mask = (1 << bits) - 1;
/* calculate the mult/shift to convert counter ticks to ns. */
clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 0);
clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
r = rate;
if (r >= 4000000) {
r /= 1000000;
r_unit = 'M';
} else {
} else if (r >= 1000) {
r /= 1000;
r_unit = 'k';
}
} else
r_unit = ' ';
/* calculate how many ns until we wrap */
wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift);
wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift);
do_div(wrap, NSEC_PER_MSEC);
w = wrap;
/* calculate the ns resolution of this counter */
res = cyc_to_ns(1ULL, cd->mult, cd->shift);
res = cyc_to_ns(1ULL, cd.mult, cd.shift);
pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n",
clock_bits, r, r_unit, res, w);
bits, r, r_unit, res, w);
/*
* Start the timer to keep sched_clock() properly updated and
* sets the initial epoch.
*/
sched_clock_timer.data = msecs_to_jiffies(w - (w / 10));
update();
update_sched_clock();
/*
* Ensure that sched_clock() starts off at 0ns
*/
cd->epoch_ns = 0;
cd.epoch_ns = 0;
pr_debug("Registered %pF as sched_clock source\n", read);
}
unsigned long long notrace sched_clock(void)
{
u32 cyc = read_sched_clock();
return cyc_to_sched_clock(cyc, sched_clock_mask);
}
void __init sched_clock_postinit(void)
{
/*
* If no sched_clock function has been provided at that point,
* make it the final one one.
*/
if (read_sched_clock == jiffy_sched_clock_read)
setup_sched_clock(jiffy_sched_clock_read, 32, HZ);
sched_clock_poll(sched_clock_timer.data);
}

14
arch/arm/kernel/setup.c
View file

@ -902,8 +902,6 @@ void __init setup_arch(char **cmdline_p)
{
struct machine_desc *mdesc;
unwind_init();
setup_processor();
mdesc = setup_machine_fdt(__atags_pointer);
if (!mdesc)
@ -911,6 +909,12 @@ void __init setup_arch(char **cmdline_p)
machine_desc = mdesc;
machine_name = mdesc->name;
#ifdef CONFIG_ZONE_DMA
if (mdesc->dma_zone_size) {
extern unsigned long arm_dma_zone_size;
arm_dma_zone_size = mdesc->dma_zone_size;
}
#endif
if (mdesc->restart_mode)
reboot_setup(&mdesc->restart_mode);
@ -945,12 +949,6 @@ void __init setup_arch(char **cmdline_p)
tcm_init();
#ifdef CONFIG_ZONE_DMA
if (mdesc->dma_zone_size) {
extern unsigned long arm_dma_zone_size;
arm_dma_zone_size = mdesc->dma_zone_size;
}
#endif
#ifdef CONFIG_MULTI_IRQ_HANDLER
handle_arch_irq = mdesc->handle_irq;
#endif

95
arch/arm/kernel/smp_twd.c
View file

@ -10,8 +10,11 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/smp.h>
#include <linux/jiffies.h>
#include <linux/clockchips.h>
@ -25,6 +28,7 @@
/* set up by the platform code */
void __iomem *twd_base;
static struct clk *twd_clk;
static unsigned long twd_timer_rate;
static struct clock_event_device __percpu **twd_evt;
@ -89,6 +93,52 @@ void twd_timer_stop(struct clock_event_device *clk)
disable_percpu_irq(clk->irq);
}
#ifdef CONFIG_CPU_FREQ
/*
* Updates clockevent frequency when the cpu frequency changes.
* Called on the cpu that is changing frequency with interrupts disabled.
*/
static void twd_update_frequency(void *data)
{
twd_timer_rate = clk_get_rate(twd_clk);
clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
}
static int twd_cpufreq_transition(struct notifier_block *nb,
unsigned long state, void *data)
{
struct cpufreq_freqs *freqs = data;
/*
* The twd clock events must be reprogrammed to account for the new
* frequency. The timer is local to a cpu, so cross-call to the
* changing cpu.
*/
if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
smp_call_function_single(freqs->cpu, twd_update_frequency,
NULL, 1);
return NOTIFY_OK;
}
static struct notifier_block twd_cpufreq_nb = {
.notifier_call = twd_cpufreq_transition,
};
static int twd_cpufreq_init(void)
{
if (!IS_ERR(twd_clk))
return cpufreq_register_notifier(&twd_cpufreq_nb,
CPUFREQ_TRANSITION_NOTIFIER);
return 0;
}
core_initcall(twd_cpufreq_init);
#endif
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long count;
@ -140,6 +190,35 @@ static irqreturn_t twd_handler(int irq, void *dev_id)
return IRQ_NONE;
}
static struct clk *twd_get_clock(void)
{
struct clk *clk;
int err;
clk = clk_get_sys("smp_twd", NULL);
if (IS_ERR(clk)) {
pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
return clk;
}
err = clk_prepare(clk);
if (err) {
pr_err("smp_twd: clock failed to prepare: %d\n", err);
clk_put(clk);
return ERR_PTR(err);
}
err = clk_enable(clk);
if (err) {
pr_err("smp_twd: clock failed to enable: %d\n", err);
clk_unprepare(clk);
clk_put(clk);
return ERR_PTR(err);
}
return clk;
}
/*
* Setup the local clock events for a CPU.
*/
@ -165,7 +244,13 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
}
}
twd_calibrate_rate();
if (!twd_clk)
twd_clk = twd_get_clock();
if (!IS_ERR_OR_NULL(twd_clk))
twd_timer_rate = clk_get_rate(twd_clk);
else
twd_calibrate_rate();
clk->name = "local_timer";
clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
@ -173,15 +258,11 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
clk->rating = 350;
clk->set_mode = twd_set_mode;
clk->set_next_event = twd_set_next_event;
clk->shift = 20;
clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
this_cpu_clk = __this_cpu_ptr(twd_evt);
*this_cpu_clk = clk;
clockevents_register_device(clk);
clockevents_config_and_register(clk, twd_timer_rate,
0xf, 0xffffffff);
enable_percpu_irq(clk->irq, 0);
}

16
arch/arm/kernel/swp_emulate.c
View file

@ -25,6 +25,7 @@
#include <linux/syscalls.h>
#include <linux/perf_event.h>
#include <asm/opcodes.h>
#include <asm/traps.h>
#include <asm/uaccess.h>
@ -185,6 +186,21 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
res = arm_check_condition(instr, regs->ARM_cpsr);
switch (res) {
case ARM_OPCODE_CONDTEST_PASS:
break;
case ARM_OPCODE_CONDTEST_FAIL:
/* Condition failed - return to next instruction */
regs->ARM_pc += 4;
return 0;
case ARM_OPCODE_CONDTEST_UNCOND:
/* If unconditional encoding - not a SWP, undef */
return -EFAULT;
default:
return -EINVAL;
}
if (current->pid != previous_pid) {
pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
current->comm, (unsigned long)current->pid);

22
arch/arm/kernel/tcm.c
View file

@ -180,9 +180,9 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
*/
void __init tcm_init(void)
{
u32 tcm_status = read_cpuid_tcmstatus();
u8 dtcm_banks = (tcm_status >> 16) & 0x03;
u8 itcm_banks = (tcm_status & 0x03);
u32 tcm_status;
u8 dtcm_banks;
u8 itcm_banks;
size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data;
size_t itcm_code_sz = &__eitcm_text - &__sitcm_text;
char *start;
@ -191,6 +191,22 @@ void __init tcm_init(void)
int ret;
int i;
/*
* Prior to ARMv5 there is no TCM, and trying to read the status
* register will hang the processor.
*/
if (cpu_architecture() < CPU_ARCH_ARMv5) {
if (dtcm_code_sz || itcm_code_sz)
pr_info("CPU TCM: %u bytes of DTCM and %u bytes of "
"ITCM code compiled in, but no TCM present "
"in pre-v5 CPU\n", dtcm_code_sz, itcm_code_sz);
return;
}
tcm_status = read_cpuid_tcmstatus();
dtcm_banks = (tcm_status >> 16) & 0x03;
itcm_banks = (tcm_status & 0x03);
/* Values greater than 2 for D/ITCM banks are "reserved" */
if (dtcm_banks > 2)
dtcm_banks = 0;

133
arch/arm/kernel/unwind.c
View file

@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
struct unwind_ctrl_block {
unsigned long vrs[16]; /* virtual register set */
unsigned long *insn; /* pointer to the current instructions word */
const unsigned long *insn; /* pointer to the current instructions word */
int entries; /* number of entries left to interpret */
int byte; /* current byte number in the instructions word */
};
@ -83,8 +83,9 @@ enum regs {
PC = 15
};
extern struct unwind_idx __start_unwind_idx[];
extern struct unwind_idx __stop_unwind_idx[];
extern const struct unwind_idx __start_unwind_idx[];
static const struct unwind_idx *__origin_unwind_idx;
extern const struct unwind_idx __stop_unwind_idx[];
static DEFINE_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);
@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables);
})
/*
* Binary search in the unwind index. The entries entries are
* Binary search in the unwind index. The entries are
* guaranteed to be sorted in ascending order by the linker.
*
* start = first entry
* origin = first entry with positive offset (or stop if there is no such entry)
* stop - 1 = last entry
*/
static struct unwind_idx *search_index(unsigned long addr,
struct unwind_idx *first,
struct unwind_idx *last)
static const struct unwind_idx *search_index(unsigned long addr,
const struct unwind_idx *start,
const struct unwind_idx *origin,
const struct unwind_idx *stop)
{
pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
unsigned long addr_prel31;
if (addr < first->addr) {
pr_warning("unwind: Unknown symbol address %08lx\n", addr);
return NULL;
} else if (addr >= last->addr)
return last;
pr_debug("%s(%08lx, %p, %p, %p)\n",
__func__, addr, start, origin, stop);
while (first < last - 1) {
struct unwind_idx *mid = first + ((last - first + 1) >> 1);
/*
* only search in the section with the matching sign. This way the
* prel31 numbers can be compared as unsigned longs.
*/
if (addr < (unsigned long)start)
/* negative offsets: [start; origin) */
stop = origin;
else
/* positive offsets: [origin; stop) */
start = origin;
if (addr < mid->addr)
last = mid;
else
first = mid;
/* prel31 for address relavive to start */
addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
while (start < stop - 1) {
const struct unwind_idx *mid = start + ((stop - start) >> 1);
/*
* As addr_prel31 is relative to start an offset is needed to
* make it relative to mid.
*/
if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
mid->addr_offset)
stop = mid;
else {
/* keep addr_prel31 relative to start */
addr_prel31 -= ((unsigned long)mid -
(unsigned long)start);
start = mid;
}
}
return first;
if (likely(start->addr_offset <= addr_prel31))
return start;
else {
pr_warning("unwind: Unknown symbol address %08lx\n", addr);
return NULL;
}
}
static struct unwind_idx *unwind_find_idx(unsigned long addr)
static const struct unwind_idx *unwind_find_origin(
const struct unwind_idx *start, const struct unwind_idx *stop)
{
struct unwind_idx *idx = NULL;
pr_debug("%s(%p, %p)\n", __func__, start, stop);
while (start < stop) {
const struct unwind_idx *mid = start + ((stop - start) >> 1);
if (mid->addr_offset >= 0x40000000)
/* negative offset */
start = mid + 1;
else
/* positive offset */
stop = mid;
}
pr_debug("%s -> %p\n", __func__, stop);
return stop;
}
static const struct unwind_idx *unwind_find_idx(unsigned long addr)
{
const struct unwind_idx *idx = NULL;
unsigned long flags;
pr_debug("%s(%08lx)\n", __func__, addr);
if (core_kernel_text(addr))
if (core_kernel_text(addr)) {
if (unlikely(!__origin_unwind_idx))
__origin_unwind_idx =
unwind_find_origin(__start_unwind_idx,
__stop_unwind_idx);
/* main unwind table */
idx = search_index(addr, __start_unwind_idx,
__stop_unwind_idx - 1);
else {
__origin_unwind_idx,
__stop_unwind_idx);
} else {
/* module unwind tables */
struct unwind_table *table;
@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
if (addr >= table->begin_addr &&
addr < table->end_addr) {
idx = search_index(addr, table->start,
table->stop - 1);
table->origin,
table->stop);
/* Move-to-front to exploit common traces */
list_move(&table->list, &unwind_tables);
break;
@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
int unwind_frame(struct stackframe *frame)
{
unsigned long high, low;
struct unwind_idx *idx;
const struct unwind_idx *idx;
struct unwind_ctrl_block ctrl;
/* only go to a higher address on the stack */
@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
unsigned long text_size)
{
unsigned long flags;
struct unwind_idx *idx;
struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
if (!tab)
return tab;
tab->start = (struct unwind_idx *)start;
tab->stop = (struct unwind_idx *)(start + size);
tab->start = (const struct unwind_idx *)start;
tab->stop = (const struct unwind_idx *)(start + size);
tab->origin = unwind_find_origin(tab->start, tab->stop);
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;
/* Convert the symbol addresses to absolute values */
for (idx = tab->start; idx < tab->stop; idx++)
idx->addr = prel31_to_addr(&idx->addr);
spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
spin_unlock_irqrestore(&unwind_lock, flags);
@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab)
kfree(tab);
}
int __init unwind_init(void)
{
struct unwind_idx *idx;
/* Convert the symbol addresses to absolute values */
for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
idx->addr = prel31_to_addr(&idx->addr);
pr_debug("unwind: ARM stack unwinding initialised\n");
return 0;
}

4
arch/arm/mach-at91/at91cap9.c
View file

@ -313,7 +313,7 @@ static struct at91_gpio_bank at91cap9_gpio[] = {
}
};
static void at91cap9_reset(void)
static void at91cap9_restart(char mode, const char *cmd)
{
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
@ -335,7 +335,7 @@ static void __init at91cap9_map_io(void)
static void __init at91cap9_initialize(void)
{
at91_arch_reset = at91cap9_reset;
arm_pm_restart = at91cap9_restart;
pm_power_off = at91cap9_poweroff;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);

4
arch/arm/mach-at91/at91rm9200.c
View file

@ -288,7 +288,7 @@ static struct at91_gpio_bank at91rm9200_gpio[] = {
}
};
static void at91rm9200_reset(void)
static void at91rm9200_restart(char mode, const char *cmd)
{
/*
* Perform a hardware reset with the use of the Watchdog timer.
@ -309,7 +309,7 @@ static void __init at91rm9200_map_io(void)
static void __init at91rm9200_initialize(void)
{
at91_arch_reset = at91rm9200_reset;
arm_pm_restart = at91rm9200_restart;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)

2
arch/arm/mach-at91/at91sam9260.c
View file

@ -327,7 +327,7 @@ static void __init at91sam9260_map_io(void)
static void __init at91sam9260_initialize(void)
{
at91_arch_reset = at91sam9_alt_reset;
arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9260_poweroff;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);

2
arch/arm/mach-at91/at91sam9261.c
View file

@ -287,7 +287,7 @@ static void __init at91sam9261_map_io(void)
static void __init at91sam9261_initialize(void)
{
at91_arch_reset = at91sam9_alt_reset;
arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9261_poweroff;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);

2
arch/arm/mach-at91/at91sam9263.c
View file

@ -305,7 +305,7 @@ static void __init at91sam9263_map_io(void)
static void __init at91sam9263_initialize(void)
{
at91_arch_reset = at91sam9_alt_reset;
arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9263_poweroff;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);

9
arch/arm/mach-at91/at91sam9_alt_reset.S
View file

@ -14,20 +14,15 @@
*/
#include <linux/linkage.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <mach/at91sam9_sdramc.h>
#include <mach/at91_rstc.h>
.arm
.globl at91sam9_alt_reset
.globl at91sam9_alt_restart
at91sam9_alt_reset: mrc p15, 0, r0, c1, c0, 0
orr r0, r0, #CR_I
mcr p15, 0, r0, c1, c0, 0 @ enable I-cache
ldr r0, .at91_va_base_sdramc @ preload constants
at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants
ldr r1, .at91_va_base_rstc_cr
mov r2, #1

4
arch/arm/mach-at91/at91sam9g45.c
View file

@ -317,7 +317,7 @@ static struct at91_gpio_bank at91sam9g45_gpio[] = {
}
};
static void at91sam9g45_reset(void)
static void at91sam9g45_restart(char mode, const char *cmd)
{
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
@ -340,7 +340,7 @@ static void __init at91sam9g45_map_io(void)
static void __init at91sam9g45_initialize(void)
{
at91_arch_reset = at91sam9g45_reset;
arm_pm_restart = at91sam9g45_restart;
pm_power_off = at91sam9g45_poweroff;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);

2
arch/arm/mach-at91/at91sam9rl.c
View file

@ -292,7 +292,7 @@ static void __init at91sam9rl_map_io(void)
static void __init at91sam9rl_initialize(void)
{
at91_arch_reset = at91sam9_alt_reset;
arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9rl_poweroff;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);

3
arch/arm/mach-at91/generic.h
View file

@ -57,7 +57,7 @@ extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
/* reset */
extern void at91sam9_alt_reset(void);
extern void at91sam9_alt_restart(char, const char *);
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
@ -71,5 +71,4 @@ struct at91_gpio_bank {
extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
extern void __init at91_gpio_irq_setup(void);
extern void (*at91_arch_reset)(void);
extern int at91_extern_irq;

9
arch/arm/mach-at91/include/mach/system.h
View file

@ -47,13 +47,4 @@ static inline void arch_idle(void)
#endif
}
void (*at91_arch_reset)(void);
static inline void arch_reset(char mode, const char *cmd)
{
/* call the CPU-specific reset function */
if (at91_arch_reset)
(at91_arch_reset)();
}
#endif

25
arch/arm/mach-bcmring/arch.c
View file

@ -49,7 +49,29 @@ HW_DECLARE_SPINLOCK(gpio)
#endif
/* sysctl */
int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
static int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
static void bcmring_restart(char mode, const char *cmd)
{
printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
if (mode == 'h') {
/* Reboot configured in proc entry */
if (bcmring_arch_warm_reboot) {
printk("warm reset\n");
/* Issue Warm reset (do not reset ethernet switch, keep alive) */
chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
} else {
/* Force reset of everything */
printk("force reset\n");
chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
}
} else {
/* Force reset of everything */
printk("force reset\n");
chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
}
}
static struct ctl_table_header *bcmring_sysctl_header;
@ -173,4 +195,5 @@ MACHINE_START(BCMRING, "BCMRING")
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
.init_machine = bcmring_init_machine
.restart = bcmring_restart,
MACHINE_END

26
arch/arm/mach-bcmring/include/mach/system.h
View file

@ -20,35 +20,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/csp/chipcHw_inline.h>
extern int bcmring_arch_warm_reboot;
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
if (mode == 'h') {
/* Reboot configured in proc entry */
if (bcmring_arch_warm_reboot) {
printk("warm reset\n");
/* Issue Warm reset (do not reset ethernet switch, keep alive) */
chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
} else {
/* Force reset of everything */
printk("force reset\n");
chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
}
} else {
/* Force reset of everything */
printk("force reset\n");
chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
}
}
#endif

1
arch/arm/mach-clps711x/autcpu12.c
View file

@ -68,5 +68,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
.map_io = autcpu12_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.restart = clps711x_restart,
MACHINE_END

1
arch/arm/mach-clps711x/cdb89712.c
View file

@ -59,4 +59,5 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
.map_io = cdb89712_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.restart = clps711x_restart,
MACHINE_END

1
arch/arm/mach-clps711x/ceiva.c
View file

@ -60,4 +60,5 @@ MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
.map_io = ceiva_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.restart = clps711x_restart,
MACHINE_END

1
arch/arm/mach-clps711x/clep7312.c
View file

@ -41,5 +41,6 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.restart = clps711x_restart,
MACHINE_END

5
arch/arm/mach-clps711x/common.c
View file

@ -220,3 +220,8 @@ struct sys_timer clps711x_timer = {
.init = clps711x_timer_init,
.offset = clps711x_gettimeoffset,
};
void clps711x_restart(char mode, const char *cmd)
{
soft_restart(0);
}

1
arch/arm/mach-clps711x/common.h
View file

@ -9,3 +9,4 @@ struct sys_timer;
extern void clps711x_map_io(void);
extern void clps711x_init_irq(void);
extern struct sys_timer clps711x_timer;
extern void clps711x_restart(char mode, const char *cmd);

1
arch/arm/mach-clps711x/edb7211-arch.c
View file

@ -62,4 +62,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
.reserve = edb7211_reserve,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.restart = clps711x_restart,
MACHINE_END

1
arch/arm/mach-clps711x/fortunet.c
View file

@ -78,4 +78,5 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.restart = clps711x_restart,
MACHINE_END

5
arch/arm/mach-clps711x/include/mach/system.h
View file

@ -32,9 +32,4 @@ static inline void arch_idle(void)
mov r0, r0");
}
static inline void arch_reset(char mode, const char *cmd)
{
soft_restart(0);
}
#endif

1
arch/arm/mach-clps711x/p720t.c
View file

@ -93,6 +93,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
.map_io = p720t_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.restart = clps711x_restart,
MACHINE_END
static int p720t_hw_init(void)

1
arch/arm/mach-cns3xxx/cns3420vb.c
View file

@ -204,4 +204,5 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
.timer = &cns3xxx_timer,
.handle_irq = gic_handle_irq,
.init_machine = cns3420_init,
.restart = cns3xxx_restart,
MACHINE_END

1
arch/arm/mach-cns3xxx/core.h
View file

@ -22,5 +22,6 @@ static inline void cns3xxx_l2x0_init(void) {}
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
void cns3xxx_restart(char, const char *);
#endif /* __CNS3XXX_CORE_H */

3
arch/arm/mach-cns3xxx/include/mach/system.h
View file

@ -11,7 +11,6 @@
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
#include <linux/io.h>
#include <asm/proc-fns.h>
static inline void arch_idle(void)
@ -23,6 +22,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
void arch_reset(char mode, const char *cmd);
#endif

4
arch/arm/mach-cns3xxx/pm.c
View file

@ -11,9 +11,9 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/atomic.h>
#include <mach/system.h>
#include <mach/cns3xxx.h>
#include <mach/pm.h>
#include "core.h"
void cns3xxx_pwr_clk_en(unsigned int block)
{
@ -89,7 +89,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
}
EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
void arch_reset(char mode, const char *cmd)
void cns3xxx_restart(char mode, const char *cmd)
{
/*
* To reset, we hit the on-board reset register

1
arch/arm/mach-davinci/board-da830-evm.c
View file

@ -682,4 +682,5 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
.timer = &davinci_timer,
.init_machine = da830_evm_init,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-da850-evm.c
View file

@ -1411,4 +1411,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
.timer = &davinci_timer,
.init_machine = da850_evm_init,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-dm355-evm.c
View file

@ -357,4 +357,5 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
.timer = &davinci_timer,
.init_machine = dm355_evm_init,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-dm355-leopard.c
View file

@ -276,4 +276,5 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
.timer = &davinci_timer,
.init_machine = dm355_leopard_init,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-dm365-evm.c
View file

@ -618,5 +618,6 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
.timer = &davinci_timer,
.init_machine = dm365_evm_init,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-dm644x-evm.c
View file

@ -719,4 +719,5 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
.timer = &davinci_timer,
.init_machine = davinci_evm_init,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END

2
arch/arm/mach-davinci/board-dm646x-evm.c
View file

@ -799,6 +799,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
.timer = &davinci_timer,
.init_machine = evm_init,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
@ -808,5 +809,6 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
.timer = &davinci_timer,
.init_machine = evm_init,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-mityomapl138.c
View file

@ -573,4 +573,5 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
.timer = &davinci_timer,
.init_machine = mityomapl138_init,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-neuros-osd2.c
View file

@ -278,4 +278,5 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
.timer = &davinci_timer,
.init_machine = davinci_ntosd2_init,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-omapl138-hawk.c
View file

@ -344,4 +344,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
.timer = &davinci_timer,
.init_machine = omapl138_hawk_init,
.dma_zone_size = SZ_128M,
.restart = da8xx_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-sffsdr.c
View file

@ -157,4 +157,5 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
.timer = &davinci_timer,
.init_machine = davinci_sffsdr_init,
.dma_zone_size = SZ_128M,
.restart = davinci_restart,
MACHINE_END

1
arch/arm/mach-davinci/board-tnetv107x-evm.c
View file

@ -283,4 +283,5 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
.timer = &davinci_timer,
.init_machine = tnetv107x_evm_board_init,
.dma_zone_size = SZ_128M,
.restart = tnetv107x_restart,
MACHINE_END

3
arch/arm/mach-davinci/common.c
View file

@ -97,9 +97,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
local_flush_tlb_all();
flush_cache_all();
if (!davinci_soc_info.reset)
davinci_soc_info.reset = davinci_watchdog_reset;
/*
* We want to check CPU revision early for cpu_is_xxxx() macros.
* IO space mapping must be initialized before we can do that.

1
arch/arm/mach-davinci/da830.c
View file

@ -1201,7 +1201,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.gpio_irq = IRQ_DA8XX_GPIO0,
.serial_dev = &da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
.reset_device = &da8xx_wdt_device,
};
void __init da830_init(void)

1
arch/arm/mach-davinci/da850.c
View file

@ -1121,7 +1121,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_ARM_RAM_BASE,
.sram_len = SZ_8K,
.reset_device = &da8xx_wdt_device,
};
void __init da850_init(void)

5
arch/arm/mach-davinci/devices-da8xx.c
View file

@ -363,6 +363,11 @@ struct platform_device da8xx_wdt_device = {
.resource = da8xx_watchdog_resources,
};
void da8xx_restart(char mode, const char *cmd)
{
davinci_watchdog_reset(&da8xx_wdt_device);
}
int __init da8xx_register_watchdog(void)
{
return platform_device_register(&da8xx_wdt_device);

5
arch/arm/mach-davinci/devices.c
View file

@ -291,6 +291,11 @@ struct platform_device davinci_wdt_device = {
.resource = wdt_resources,
};
void davinci_restart(char mode, const char *cmd)
{
davinci_watchdog_reset(&davinci_wdt_device);
}
static void davinci_init_wdt(void)
{
platform_device_register(&davinci_wdt_device);

1
arch/arm/mach-davinci/dm355.c
View file

@ -853,7 +853,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
.serial_dev = &dm355_serial_device,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
.reset_device = &davinci_wdt_device,
};
void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)

1
arch/arm/mach-davinci/dm365.c
View file

@ -1083,7 +1083,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
.emac_pdata = &dm365_emac_pdata,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
.reset_device = &davinci_wdt_device,
};
void __init dm365_init_asp(struct snd_platform_data *pdata)

1
arch/arm/mach-davinci/dm644x.c
View file

@ -767,7 +767,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
.emac_pdata = &dm644x_emac_pdata,
.sram_dma = 0x00008000,
.sram_len = SZ_16K,
.reset_device = &davinci_wdt_device,
};
void __init dm644x_init_asp(struct snd_platform_data *pdata)

1
arch/arm/mach-davinci/dm646x.c
View file

@ -854,7 +854,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
.emac_pdata = &dm646x_emac_pdata,
.sram_dma = 0x10010000,
.sram_len = SZ_32K,
.reset_device = &davinci_wdt_device,
};
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)

3
arch/arm/mach-davinci/include/mach/common.h
View file

@ -77,14 +77,13 @@ struct davinci_soc_info {
struct emac_platform_data *emac_pdata;
dma_addr_t sram_dma;
unsigned sram_len;
struct platform_device *reset_device;
void (*reset)(struct platform_device *);
};
extern struct davinci_soc_info davinci_soc_info;
extern void davinci_common_init(struct davinci_soc_info *soc_info);
extern void davinci_init_ide(void);
void davinci_restart(char mode, const char *cmd);
/* standard place to map on-chip SRAMs; they *may* support DMA */
#define SRAM_VIRT 0xfffe0000

1
arch/arm/mach-davinci/include/mach/da8xx.h
View file

@ -91,6 +91,7 @@ int da8xx_register_cpuidle(void);
void __iomem * __init da8xx_get_mem_ctlr(void);
int da850_register_pm(struct platform_device *pdev);
int __init da850_register_sata(unsigned long refclkpn);
void da8xx_restart(char mode, const char *cmd);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;

6
arch/arm/mach-davinci/include/mach/system.h
View file

@ -18,10 +18,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
if (davinci_soc_info.reset)
davinci_soc_info.reset(davinci_soc_info.reset_device);
}
#endif /* __ASM_ARCH_SYSTEM_H */

1
arch/arm/mach-davinci/include/mach/tnetv107x.h
View file

@ -54,6 +54,7 @@ extern struct platform_device tnetv107x_serial_device;
extern void __init tnetv107x_init(void);
extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
extern void __init tnetv107x_irq_init(void);
void tnetv107x_restart(char mode, const char *cmd);
#endif

7
arch/arm/mach-davinci/tnetv107x.c
View file

@ -730,6 +730,11 @@ static void tnetv107x_watchdog_reset(struct platform_device *pdev)
__raw_writel(1, &regs->kick);
}
void tnetv107x_restart(char mode, const char *cmd)
{
tnetv107x_watchdog_reset(&tnetv107x_wdt_device);
}
static struct davinci_soc_info tnetv107x_soc_info = {
.io_desc = io_desc,
.io_desc_num = ARRAY_SIZE(io_desc),
@ -752,8 +757,6 @@ static struct davinci_soc_info tnetv107x_soc_info = {
.gpio_num = TNETV107X_N_GPIO,
.timer_info = &timer_info,
.serial_dev = &tnetv107x_serial_device,
.reset = tnetv107x_watchdog_reset,
.reset_device = &tnetv107x_wdt_device,
};
void __init tnetv107x_init(void)

1
arch/arm/mach-dove/cm-a510.c
View file

@ -93,4 +93,5 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
.restart = dove_restart,
MACHINE_END

16
arch/arm/mach-dove/common.c
View file

@ -292,3 +292,19 @@ void __init dove_init(void)
dove_xor0_init();
dove_xor1_init();
}
void dove_restart(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
*/
writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
/*
* Assert soft reset.
*/
writel(SOFT_RESET, SYSTEM_SOFT_RESET);
while (1)
;
}

1
arch/arm/mach-dove/common.h
View file

@ -39,5 +39,6 @@ void dove_spi1_init(void);
void dove_i2c_init(void);
void dove_sdio0_init(void);
void dove_sdio1_init(void);
void dove_restart(char, const char *);
#endif

1
arch/arm/mach-dove/dove-db-setup.c
View file

@ -100,4 +100,5 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
.restart = dove_restart,
MACHINE_END

19
arch/arm/mach-dove/include/mach/system.h
View file

@ -9,28 +9,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
*/
writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
/*
* Assert soft reset.
*/
writel(SOFT_RESET, SYSTEM_SOFT_RESET);
while (1)
;
}
#endif

6
arch/arm/mach-ebsa110/core.c
View file

@ -278,6 +278,11 @@ static int __init ebsa110_init(void)
arch_initcall(ebsa110_init);
static void ebsa110_restart(char mode, const char *cmd)
{
soft_restart(0x80000000);
}
MACHINE_START(EBSA110, "EBSA110")
/* Maintainer: Russell King */
.atag_offset = 0x400,
@ -287,4 +292,5 @@ MACHINE_START(EBSA110, "EBSA110")
.map_io = ebsa110_map_io,
.init_irq = ebsa110_init_irq,
.timer = &ebsa110_timer,
.restart = ebsa110_restart,
MACHINE_END

2
arch/arm/mach-ebsa110/include/mach/system.h
View file

@ -34,6 +34,4 @@ static inline void arch_idle(void)
asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
}
#define arch_reset(mode, cmd) soft_restart(0x80000000)
#endif

1
arch/arm/mach-ep93xx/adssphere.c
View file

@ -40,4 +40,5 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = adssphere_init_machine,
.restart = ep93xx_restart,
MACHINE_END

12
arch/arm/mach-ep93xx/core.c
View file

@ -906,3 +906,15 @@ void __init ep93xx_init_devices(void)
platform_device_register(&ep93xx_ohci_device);
platform_device_register(&ep93xx_leds);
}
void ep93xx_restart(char mode, const char *cmd)
{
/*
* Set then clear the SWRST bit to initiate a software reset
*/
ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
while (1)
;
}

8
arch/arm/mach-ep93xx/edb93xx.c
View file

@ -254,6 +254,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
.restart = ep93xx_restart,
MACHINE_END
#endif
@ -266,6 +267,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
.restart = ep93xx_restart,
MACHINE_END
#endif
@ -278,6 +280,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
.restart = ep93xx_restart,
MACHINE_END
#endif
@ -290,6 +293,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
.restart = ep93xx_restart,
MACHINE_END
#endif
@ -302,6 +306,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
.restart = ep93xx_restart,
MACHINE_END
#endif
@ -314,6 +319,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
.restart = ep93xx_restart,
MACHINE_END
#endif
@ -326,6 +332,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
.restart = ep93xx_restart,
MACHINE_END
#endif
@ -338,5 +345,6 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
.restart = ep93xx_restart,
MACHINE_END
#endif

1
arch/arm/mach-ep93xx/gesbc9312.c
View file

@ -40,4 +40,5 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = gesbc9312_init_machine,
.restart = ep93xx_restart,
MACHINE_END

2
arch/arm/mach-ep93xx/include/mach/platform.h
View file

@ -66,4 +66,6 @@ void ep93xx_register_ac97(void);
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
void ep93xx_restart(char, const char *);
#endif

15
arch/arm/mach-ep93xx/include/mach/system.h
View file

@ -1,22 +1,7 @@
/*
* arch/arm/mach-ep93xx/include/mach/system.h
*/
#include <mach/hardware.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
/*
* Set then clear the SWRST bit to initiate a software reset
*/
ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
while (1)
;
}

Some files were not shown because too many files have changed in this diff Show more