1
0
Fork 0

Merge remote-tracking branches 'regulator/topic/cpcap', 'regulator/topic/fan53555', 'regulator/topic/gpio', 'regulator/topic/hi655x' and 'regulator/topic/lp8755' into regulator-next

hifive-unleashed-5.1
Mark Brown 2017-02-19 16:40:28 +00:00
9 changed files with 515 additions and 9 deletions

View File

@ -0,0 +1,34 @@
Motorola CPCAP PMIC voltage regulators
------------------------------------
Requires node properties:
- "compatible" value one of:
"motorola,cpcap-regulator"
"motorola,mapphone-cpcap-regulator"
Required regulator properties:
- "regulator-name"
- "regulator-enable-ramp-delay"
- "regulator-min-microvolt"
- "regulator-max-microvolt"
Optional regulator properties:
- "regulator-boot-on"
See Documentation/devicetree/bindings/regulator/regulator.txt
for more details about the regulator properties.
Example:
cpcap_regulator: regulator {
compatible = "motorola,cpcap-regulator";
cpcap_regulators: regulators {
sw5: SW5 {
regulator-min-microvolt = <5050000>;
regulator-max-microvolt = <5050000>;
regulator-enable-ramp-delay = <50000>;
regulator-boot-on;
};
};
};

View File

@ -13,7 +13,7 @@ Optional properties:
- startup-delay-us : Startup time in microseconds.
- enable-active-high : Polarity of GPIO is active high (default is low).
- regulator-type : Specifies what is being regulated, must be either
"voltage" or "current", defaults to current.
"voltage" or "current", defaults to voltage.
Any property defined as part of the core regulator binding defined in
regulator.txt can also be used.

View File

@ -163,6 +163,13 @@ config REGULATOR_BCM590XX
BCM590xx PMUs. This will enable support for the software
controllable LDO/Switching regulators.
config REGULATOR_CPCAP
tristate "Motorola CPCAP regulator"
depends on MFD_CPCAP
help
Say y here for CPCAP regulator found on some Motorola phones
and tablets such as Droid 4.
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X

View File

@ -11,6 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o

View File

@ -0,0 +1,464 @@
/*
* Motorola CPCAP PMIC regulator driver
*
* Based on cpcap-regulator.c from Motorola Linux kernel tree
* Copyright (C) 2009-2011 Motorola, Inc.
*
* Rewritten for mainline kernel to use device tree and regmap
* Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/motorola-cpcap.h>
/*
* Resource assignment register bits. These seem to control the state
* idle modes adn are used at least for omap4.
*/
/* CPCAP_REG_ASSIGN2 bits - Resource Assignment 2 */
#define CPCAP_BIT_VSDIO_SEL BIT(15)
#define CPCAP_BIT_VDIG_SEL BIT(14)
#define CPCAP_BIT_VCAM_SEL BIT(13)
#define CPCAP_BIT_SW6_SEL BIT(12)
#define CPCAP_BIT_SW5_SEL BIT(11)
#define CPCAP_BIT_SW4_SEL BIT(10)
#define CPCAP_BIT_SW3_SEL BIT(9)
#define CPCAP_BIT_SW2_SEL BIT(8)
#define CPCAP_BIT_SW1_SEL BIT(7)
/* CPCAP_REG_ASSIGN3 bits - Resource Assignment 3 */
#define CPCAP_BIT_VUSBINT2_SEL BIT(15)
#define CPCAP_BIT_VUSBINT1_SEL BIT(14)
#define CPCAP_BIT_VVIB_SEL BIT(13)
#define CPCAP_BIT_VWLAN1_SEL BIT(12)
#define CPCAP_BIT_VRF1_SEL BIT(11)
#define CPCAP_BIT_VHVIO_SEL BIT(10)
#define CPCAP_BIT_VDAC_SEL BIT(9)
#define CPCAP_BIT_VUSB_SEL BIT(8)
#define CPCAP_BIT_VSIM_SEL BIT(7)
#define CPCAP_BIT_VRFREF_SEL BIT(6)
#define CPCAP_BIT_VPLL_SEL BIT(5)
#define CPCAP_BIT_VFUSE_SEL BIT(4)
#define CPCAP_BIT_VCSI_SEL BIT(3)
#define CPCAP_BIT_SPARE_14_2 BIT(2)
#define CPCAP_BIT_VWLAN2_SEL BIT(1)
#define CPCAP_BIT_VRF2_SEL BIT(0)
/* CPCAP_REG_ASSIGN4 bits - Resource Assignment 4 */
#define CPCAP_BIT_VAUDIO_SEL BIT(0)
/*
* Enable register bits. At least CPCAP_BIT_AUDIO_LOW_PWR is generic,
* and not limited to audio regulator. Let's use the Motorola kernel
* naming for now until we have a better understanding of the other
* enable register bits. No idea why BIT(3) is not defined.
*/
#define CPCAP_BIT_AUDIO_LOW_PWR BIT(6)
#define CPCAP_BIT_AUD_LOWPWR_SPEED BIT(5)
#define CPCAP_BIT_VAUDIOPRISTBY BIT(4)
#define CPCAP_BIT_VAUDIO_MODE1 BIT(2)
#define CPCAP_BIT_VAUDIO_MODE0 BIT(1)
#define CPCAP_BIT_V_AUDIO_EN BIT(0)
/*
* Off mode configuration bit. Used currently only by SW5 on omap4. There's
* the following comment in Motorola Linux kernel tree for it:
*
* When set in the regulator mode, the regulator assignment will be changed
* to secondary when the regulator is disabled. The mode will be set back to
* primary when the regulator is turned on.
*/
#define CPCAP_REG_OFF_MODE_SEC BIT(15)
/**
* SoC specific configuraion for CPCAP regulator. There are at least three
* different SoCs each with their own parameters: omap3, omap4 and tegra2.
*
* The assign_reg and assign_mask seem to allow toggling between primary
* and secondary mode that at least omap4 uses for off mode.
*/
struct cpcap_regulator {
struct regulator_desc rdesc;
const u16 assign_reg;
const u16 assign_mask;
const u16 vsel_shift;
};
#define CPCAP_REG(_ID, reg, assignment_reg, assignment_mask, val_tbl, \
mode_mask, volt_mask, volt_shft, \
mode_val, off_val, volt_trans_time) { \
.rdesc = { \
.name = #_ID, \
.of_match = of_match_ptr(#_ID), \
.ops = &cpcap_regulator_ops, \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = CPCAP_##_ID, \
.owner = THIS_MODULE, \
.n_voltages = ARRAY_SIZE(val_tbl), \
.volt_table = (val_tbl), \
.vsel_reg = (reg), \
.vsel_mask = (volt_mask), \
.enable_reg = (reg), \
.enable_mask = (mode_mask), \
.enable_val = (mode_val), \
.disable_val = (off_val), \
.ramp_delay = (volt_trans_time), \
}, \
.assign_reg = (assignment_reg), \
.assign_mask = (assignment_mask), \
.vsel_shift = (volt_shft), \
}
struct cpcap_ddata {
struct regmap *reg;
struct device *dev;
const struct cpcap_regulator *soc;
};
enum cpcap_regulator_id {
CPCAP_SW1,
CPCAP_SW2,
CPCAP_SW3,
CPCAP_SW4,
CPCAP_SW5,
CPCAP_SW6,
CPCAP_VCAM,
CPCAP_VCSI,
CPCAP_VDAC,
CPCAP_VDIG,
CPCAP_VFUSE,
CPCAP_VHVIO,
CPCAP_VSDIO,
CPCAP_VPLL,
CPCAP_VRF1,
CPCAP_VRF2,
CPCAP_VRFREF,
CPCAP_VWLAN1,
CPCAP_VWLAN2,
CPCAP_VSIM,
CPCAP_VSIMCARD,
CPCAP_VVIB,
CPCAP_VUSB,
CPCAP_VAUDIO,
CPCAP_NR_REGULATORS,
};
/*
* We need to also configure regulator idle mode for SoC off mode if
* CPCAP_REG_OFF_MODE_SEC is set.
*/
static int cpcap_regulator_enable(struct regulator_dev *rdev)
{
struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
int error, ignore;
error = regulator_enable_regmap(rdev);
if (error)
return error;
if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
regulator->assign_mask,
regulator->assign_mask);
if (error)
ignore = regulator_disable_regmap(rdev);
}
return error;
}
/*
* We need to also configure regulator idle mode for SoC off mode if
* CPCAP_REG_OFF_MODE_SEC is set.
*/
static int cpcap_regulator_disable(struct regulator_dev *rdev)
{
struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
int error, ignore;
if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
regulator->assign_mask, 0);
if (error)
return error;
}
error = regulator_disable_regmap(rdev);
if (error && (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC)) {
ignore = regmap_update_bits(rdev->regmap, regulator->assign_reg,
regulator->assign_mask,
regulator->assign_mask);
}
return error;
}
static unsigned int cpcap_regulator_get_mode(struct regulator_dev *rdev)
{
int value;
regmap_read(rdev->regmap, rdev->desc->enable_reg, &value);
if (!(value & CPCAP_BIT_AUDIO_LOW_PWR))
return REGULATOR_MODE_STANDBY;
return REGULATOR_MODE_NORMAL;
}
static int cpcap_regulator_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
int value;
switch (mode) {
case REGULATOR_MODE_NORMAL:
value = CPCAP_BIT_AUDIO_LOW_PWR;
break;
case REGULATOR_MODE_STANDBY:
value = 0;
break;
default:
return -EINVAL;
}
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
CPCAP_BIT_AUDIO_LOW_PWR, value);
}
static struct regulator_ops cpcap_regulator_ops = {
.enable = cpcap_regulator_enable,
.disable = cpcap_regulator_disable,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_iterate,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_mode = cpcap_regulator_get_mode,
.set_mode = cpcap_regulator_set_mode,
};
static const unsigned int unknown_val_tbl[] = { 0, };
static const unsigned int sw5_val_tbl[] = { 0, 5050000, };
static const unsigned int vcam_val_tbl[] = { 2600000, 2700000, 2800000,
2900000, };
static const unsigned int vcsi_val_tbl[] = { 1200000, 1800000, };
static const unsigned int vdac_val_tbl[] = { 1200000, 1500000, 1800000,
2500000,};
static const unsigned int vdig_val_tbl[] = { 1200000, 1350000, 1500000,
1875000, };
static const unsigned int vfuse_val_tbl[] = { 1500000, 1600000, 1700000,
1800000, 1900000, 2000000,
2100000, 2200000, 2300000,
2400000, 2500000, 2600000,
2700000, 3150000, };
static const unsigned int vhvio_val_tbl[] = { 2775000, };
static const unsigned int vsdio_val_tbl[] = { 1500000, 1600000, 1800000,
2600000, 2700000, 2800000,
2900000, 3000000, };
static const unsigned int vpll_val_tbl[] = { 1200000, 1300000, 1400000,
1800000, };
/* Quirk: 2775000 is before 2500000 for vrf1 regulator */
static const unsigned int vrf1_val_tbl[] = { 2775000, 2500000, };
static const unsigned int vrf2_val_tbl[] = { 0, 2775000, };
static const unsigned int vrfref_val_tbl[] = { 2500000, 2775000, };
static const unsigned int vwlan1_val_tbl[] = { 1800000, 1900000, };
static const unsigned int vwlan2_val_tbl[] = { 2775000, 3000000, 3300000,
3300000, };
static const unsigned int vsim_val_tbl[] = { 1800000, 2900000, };
static const unsigned int vsimcard_val_tbl[] = { 1800000, 2900000, };
static const unsigned int vvib_val_tbl[] = { 1300000, 1800000, 2000000,
3000000, };
static const unsigned int vusb_val_tbl[] = { 0, 3300000, };
static const unsigned int vaudio_val_tbl[] = { 0, 2775000, };
/**
* SoC specific configuration for omap4. The data below is comes from Motorola
* Linux kernel tree. It's basically the values of cpcap_regltr_data,
* cpcap_regulator_mode_values and cpcap_regulator_off_mode_values, see
* CPCAP_REG macro above.
*
* SW1 to SW4 and SW6 seems to be unused for mapphone. Note that VSIM and
* VSIMCARD have a shared resource assignment bit.
*/
static struct cpcap_regulator omap4_regulators[] = {
CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW1_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW2_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW3_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW4_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW5_SEL, sw5_val_tbl,
0x28, 0, 0, 0x20 | CPCAP_REG_OFF_MODE_SEC, 0, 0),
CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
CPCAP_BIT_SW6_SEL, unknown_val_tbl,
0, 0, 0, 0, 0, 0),
CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
0x87, 0x30, 4, 0x3, 0, 420),
CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
0x47, 0x10, 4, 0x43, 0x41, 350),
CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
0x87, 0x30, 4, 0x3, 0, 420),
CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
0x87, 0x30, 4, 0x82, 0, 420),
CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
0x80, 0xf, 0, 0x80, 0, 420),
CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
0x17, 0, 0, 0, 0x12, 0),
CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
0x87, 0x38, 3, 0x82, 0, 420),
CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
0x43, 0x18, 3, 0x2, 0, 420),
CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
0xac, 0x2, 1, 0x4, 0, 10),
CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
0x23, 0x8, 3, 0, 0, 10),
CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
0x23, 0x8, 3, 0, 0, 420),
CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
0x47, 0x10, 4, 0, 0, 420),
CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
0x20c, 0xc0, 6, 0x20c, 0, 420),
CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsim_val_tbl,
0x23, 0x8, 3, 0x3, 0, 420),
CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
0xffff, vsimcard_val_tbl,
0x1e80, 0x8, 3, 0x1e00, 0, 420),
CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
0x1, 0xc, 2, 0x1, 0, 500),
CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
0x11c, 0x40, 6, 0xc, 0, 0),
CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
0x16, 0x1, 0, 0x4, 0, 0),
{ /* sentinel */ },
};
static const struct of_device_id cpcap_regulator_id_table[] = {
{
.compatible = "motorola,cpcap-regulator",
},
{
.compatible = "motorola,mapphone-cpcap-regulator",
.data = omap4_regulators,
},
{},
};
MODULE_DEVICE_TABLE(of, cpcap_regulator_id_table);
static int cpcap_regulator_probe(struct platform_device *pdev)
{
struct cpcap_ddata *ddata;
const struct of_device_id *match;
struct regulator_config config;
struct regulator_init_data init_data;
int i;
match = of_match_device(of_match_ptr(cpcap_regulator_id_table),
&pdev->dev);
if (!match)
return -EINVAL;
if (!match->data) {
dev_err(&pdev->dev, "no configuration data found\n");
return -ENODEV;
}
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
if (!ddata->reg)
return -ENODEV;
ddata->dev = &pdev->dev;
ddata->soc = match->data;
platform_set_drvdata(pdev, ddata);
memset(&config, 0, sizeof(config));
memset(&init_data, 0, sizeof(init_data));
config.dev = &pdev->dev;
config.regmap = ddata->reg;
config.init_data = &init_data;
for (i = 0; i < CPCAP_NR_REGULATORS; i++) {
const struct cpcap_regulator *regulator = &ddata->soc[i];
struct regulator_dev *rdev;
if (!regulator->rdesc.name)
break;
if (regulator->rdesc.volt_table == unknown_val_tbl)
continue;
config.driver_data = (void *)regulator;
rdev = devm_regulator_register(&pdev->dev,
&regulator->rdesc,
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
regulator->rdesc.name);
return PTR_ERR(rdev);
}
}
return 0;
}
static struct platform_driver cpcap_regulator_driver = {
.probe = cpcap_regulator_probe,
.driver = {
.name = "cpcap-regulator",
.of_match_table = of_match_ptr(cpcap_regulator_id_table),
},
};
module_platform_driver(cpcap_regulator_driver);
MODULE_ALIAS("platform:cpcap-regulator");
MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
MODULE_DESCRIPTION("CPCAP regulator driver");
MODULE_LICENSE("GPL v2");

View File

@ -202,7 +202,7 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT);
}
static struct regulator_ops fan53555_regulator_ops = {
static const struct regulator_ops fan53555_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,

View File

@ -96,7 +96,7 @@ static int hi655x_disable(struct regulator_dev *rdev)
return ret;
}
static struct regulator_ops hi655x_regulator_ops = {
static const struct regulator_ops hi655x_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = hi655x_disable,
.is_enabled = hi655x_is_enabled,
@ -105,7 +105,7 @@ static struct regulator_ops hi655x_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static struct regulator_ops hi655x_ldo_linear_ops = {
static const struct regulator_ops hi655x_ldo_linear_ops = {
.enable = regulator_enable_regmap,
.disable = hi655x_disable,
.is_enabled = hi655x_is_enabled,

View File

@ -227,7 +227,7 @@ err_i2c:
return ret;
}
static struct regulator_ops lp8755_buck_ops = {
static const struct regulator_ops lp8755_buck_ops = {
.map_voltage = regulator_map_voltage_linear,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,

View File

@ -161,7 +161,7 @@ static int ltc3589_set_suspend_mode(struct regulator_dev *rdev,
}
/* SW1, SW2, SW3, LDO2 */
static struct regulator_ops ltc3589_linear_regulator_ops = {
static const struct regulator_ops ltc3589_linear_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -175,18 +175,18 @@ static struct regulator_ops ltc3589_linear_regulator_ops = {
};
/* BB_OUT, LDO3 */
static struct regulator_ops ltc3589_fixed_regulator_ops = {
static const struct regulator_ops ltc3589_fixed_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
/* LDO1 */
static struct regulator_ops ltc3589_fixed_standby_regulator_ops = {
static const struct regulator_ops ltc3589_fixed_standby_regulator_ops = {
};
/* LDO4 */
static struct regulator_ops ltc3589_table_regulator_ops = {
static const struct regulator_ops ltc3589_table_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,