Merge git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion into fixes

This commit is contained in:
Russell King 2011-03-28 18:57:19 +01:00
commit 255bae73b2
4 changed files with 17 additions and 13 deletions

View file

@ -136,7 +136,7 @@
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
#define DOVE_NAND_GPIO_EN (1 << 0)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40)
#define DOVE_SPI_GPIO_SEL (1 << 5)
#define DOVE_UART1_GPIO_SEL (1 << 4)
#define DOVE_AU1_GPIO_SEL (1 << 3)

View file

@ -147,9 +147,6 @@ void __init dove_mpp_conf(unsigned int *mpp_list)
u32 pmu_sig_ctrl[PMU_SIG_REGS];
int i;
/* Initialize gpiolib. */
orion_gpio_init();
for (i = 0; i < MPP_NR_REGS; i++)
mpp_ctrl[i] = readl(MPP_CTRL(i));

View file

@ -57,6 +57,12 @@ static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
};
static struct gpio_led sheevaplug_led_pins[] = {
{
.name = "plug:red:misc",
.default_trigger = "none",
.gpio = 46,
.active_low = 1,
},
{
.name = "plug:green:health",
.default_trigger = "default-on",
@ -80,6 +86,7 @@ static struct platform_device sheevaplug_leds = {
static unsigned int sheevaplug_mpp_config[] __initdata = {
MPP29_GPIO, /* USB Power Enable */
MPP46_GPIO, /* LED Red */
MPP49_GPIO, /* LED */
0
};

View file

@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void)
/* enable devices if magic matches */
switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
case TS7800_FPGA_MAGIC:
printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
ts78xx_fpga.id & 0xff);
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_rtc.present == 1) {
tmp = ts78xx_ts_rtc_load();
if (tmp) {
printk(KERN_INFO "TS-78xx: RTC not registered\n");
pr_info("TS-78xx: RTC not registered\n");
ts78xx_fpga.supports.ts_rtc.present = 0;
}
ret |= tmp;
@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_nand.present == 1) {
tmp = ts78xx_ts_nand_load();
if (tmp) {
printk(KERN_INFO "TS-78xx: NAND not registered\n");
pr_info("TS-78xx: NAND not registered\n");
ts78xx_fpga.supports.ts_nand.present = 0;
}
ret |= tmp;
@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_rng.present == 1) {
tmp = ts78xx_ts_rng_load();
if (tmp) {
printk(KERN_INFO "TS-78xx: RNG not registered\n");
pr_info("TS-78xx: RNG not registered\n");
ts78xx_fpga.supports.ts_rng.present = 0;
}
ret |= tmp;
@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void)
{
ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff,
ts78xx_fpga.id & 0xff);
@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void)
* UrJTAG SVN since r1381 can be used to reprogram the FPGA
*/
if (ts78xx_fpga.id != fpga_id) {
printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n"
pr_err("TS-78xx FPGA: magic/rev mismatch\n"
"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
int value, ret;
if (ts78xx_fpga.state < 0) {
printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
return -EBUSY;
}
@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
value = 0;
else {
printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
pr_err("ts78xx_fpga_store: Invalid value\n");
return -EINVAL;
}
@ -616,7 +616,7 @@ static void __init ts78xx_init(void)
ret = ts78xx_fpga_load();
ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
if (ret)
printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
pr_err("sysfs_create_file failed: %d\n", ret);
}
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")