redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

serial: imx: clean up imx_poll_get_char() 

Looking at the get_poll_char() function of the 8250.c serial driver,
we learn:

* poll_get_char() doesn't have to save/disable/restore the interrupt
  registers. No interrupt handling is needed in this function at all.
  Remove it.

* Don't block in case there is no data available. So instead blocking
  in the do {} while loop, just return with NO_POLL_CHAR, immediately .

Additionally, while the i.MX6 register URXD[7-0] contain the RX_DATA,
the upper bits of this register (URXD[15-10]) might contain some
control flags. To ensure that these are not returned with the data
read, just mask out URXD[7-0].

These changes fix the 'hang' working with kdb:

$ echo ttymxc3 > /sys/module/kgdboc/parameters/kgdboc
$ echo g >/proc/sysrq-trigger
[0]kdb> help
...
<hang>

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hifive-unleashed-5.1
Dirk Behme 2014-09-03 12:33:53 +01:00 committed by Greg Kroah-Hartman
parent c993257bf7
commit 26c474128b
1 changed files with 4 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
drivers/tty/serial/imx.c
View File

@ -80,6 +80,7 @@
#define URXD_FRMERR (1<<12)
#define URXD_BRK (1<<11)
#define URXD_PRERR (1<<10)
#define URXD_RX_DATA (0xFF<<0)
#define UCR1_ADEN (1<<15) /* Auto detect interrupt */
#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
@ -1499,32 +1500,10 @@ imx_verify_port(struct uart_port *port, struct serial_struct *ser)
#if defined(CONFIG_CONSOLE_POLL)
static int imx_poll_get_char(struct uart_port *port)
{
struct imx_port_ucrs old_ucr;
unsigned int status;
unsigned char c;
if (!(readl(port->membase + USR2) & USR2_RDR))
return NO_POLL_CHAR;
/* save control registers */
imx_port_ucrs_save(port, &old_ucr);
/* disable interrupts */
writel(UCR1_UARTEN, port->membase + UCR1);
writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI),
port->membase + UCR2);
writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN),
port->membase + UCR3);
/* poll */
do {
status = readl(port->membase + USR2);
} while (~status & USR2_RDR);
/* read */
c = readl(port->membase + URXD0);
/* restore control registers */
imx_port_ucrs_restore(port, &old_ucr);
return c;
return readl(port->membase + URXD0) & URXD_RX_DATA;
}
static void imx_poll_put_char(struct uart_port *port, unsigned char c)