diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index bc7945e9dbfe..17915f64b8ee 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -64,10 +64,8 @@ Optional properties :
  - power-on-time-ms : Specifies the time it takes from the time the host
 	initiates the power-on sequence to a port until the port has adequate
 	power. The value is given in ms in a 0 - 510 range (default is 100ms).
- - swap-dx-lanes : Specifies the downstream ports which will swap the
-	differential-pair (D+/D-), default is not-swapped.
- - swap-us-lanes : Selects the upstream port differential-pair (D+/D-)
-	swapping (boolean, default is not-swapped)
+ - swap-dx-lanes : Specifies the ports which will swap the differential-pair
+	(D+/D-), default is not-swapped.
 
 Examples:
 	usb2512b@2c {
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 88533938ce19..9320787ac2e6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -3052,8 +3052,8 @@ int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
 
 	local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
 				  size, MEMREMAP_WC);
-	if (!local_mem)
-		return -ENOMEM;
+	if (IS_ERR(local_mem))
+		return PTR_ERR(local_mem);
 
 	/*
 	 * Here we pass a dma_addr_t but the arg type is a phys_addr_t.
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index fe9422d3bcdc..b0882c13a1d1 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -149,7 +149,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		break;
 	case PCI_VENDOR_ID_AMD:
 		/* AMD PLL quirk */
-		if (usb_amd_find_chipset_info())
+		if (usb_amd_quirk_pll_check())
 			ehci->amd_pll_fix = 1;
 		/* AMD8111 EHCI doesn't work, according to AMD errata */
 		if (pdev->device == 0x7463) {
@@ -186,7 +186,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		break;
 	case PCI_VENDOR_ID_ATI:
 		/* AMD PLL quirk */
-		if (usb_amd_find_chipset_info())
+		if (usb_amd_quirk_pll_check())
 			ehci->amd_pll_fix = 1;
 
 		/*
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 09a8ebd95588..6968b9f2b76b 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -159,7 +159,7 @@ out:
 	return result;
 
 error_set_cluster_id:
-	wusb_cluster_id_put(wusbhc->cluster_id);
+	wusb_cluster_id_put(addr);
 error_cluster_id_get:
 	goto out;
 
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index a033f7d855e0..f4e13a3fddee 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -152,7 +152,7 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 {
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 
-	if (usb_amd_find_chipset_info())
+	if (usb_amd_quirk_pll_check())
 		ohci->flags |= OHCI_QUIRK_AMD_PLL;
 
 	/* SB800 needs pre-fetch fix */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 3ce71cbfbb58..f6d04491df60 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -132,7 +132,7 @@ static struct amd_chipset_info {
 	struct amd_chipset_type sb_type;
 	int isoc_reqs;
 	int probe_count;
-	int probe_result;
+	bool need_pll_quirk;
 } amd_chipset;
 
 static DEFINE_SPINLOCK(amd_lock);
@@ -201,11 +201,11 @@ void sb800_prefetch(struct device *dev, int on)
 }
 EXPORT_SYMBOL_GPL(sb800_prefetch);
 
-int usb_amd_find_chipset_info(void)
+static void usb_amd_find_chipset_info(void)
 {
 	unsigned long flags;
 	struct amd_chipset_info info;
-	int ret;
+	info.need_pll_quirk = 0;
 
 	spin_lock_irqsave(&amd_lock, flags);
 
@@ -213,27 +213,34 @@ int usb_amd_find_chipset_info(void)
 	if (amd_chipset.probe_count > 0) {
 		amd_chipset.probe_count++;
 		spin_unlock_irqrestore(&amd_lock, flags);
-		return amd_chipset.probe_result;
+		return;
 	}
 	memset(&info, 0, sizeof(info));
 	spin_unlock_irqrestore(&amd_lock, flags);
 
 	if (!amd_chipset_sb_type_init(&info)) {
-		ret = 0;
 		goto commit;
 	}
 
-	/* Below chipset generations needn't enable AMD PLL quirk */
-	if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN ||
-			info.sb_type.gen == AMD_CHIPSET_SB600 ||
-			info.sb_type.gen == AMD_CHIPSET_YANGTZE ||
-			(info.sb_type.gen == AMD_CHIPSET_SB700 &&
-			info.sb_type.rev > 0x3b)) {
+	switch (info.sb_type.gen) {
+	case AMD_CHIPSET_SB700:
+		info.need_pll_quirk = info.sb_type.rev <= 0x3B;
+		break;
+	case AMD_CHIPSET_SB800:
+	case AMD_CHIPSET_HUDSON2:
+	case AMD_CHIPSET_BOLTON:
+		info.need_pll_quirk = 1;
+		break;
+	default:
+		info.need_pll_quirk = 0;
+		break;
+	}
+
+	if (!info.need_pll_quirk) {
 		if (info.smbus_dev) {
 			pci_dev_put(info.smbus_dev);
 			info.smbus_dev = NULL;
 		}
-		ret = 0;
 		goto commit;
 	}
 
@@ -252,7 +259,6 @@ int usb_amd_find_chipset_info(void)
 		}
 	}
 
-	ret = info.probe_result = 1;
 	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
 
 commit:
@@ -263,7 +269,6 @@ commit:
 
 		/* Mark that we where here */
 		amd_chipset.probe_count++;
-		ret = amd_chipset.probe_result;
 
 		spin_unlock_irqrestore(&amd_lock, flags);
 
@@ -276,10 +281,7 @@ commit:
 		amd_chipset = info;
 		spin_unlock_irqrestore(&amd_lock, flags);
 	}
-
-	return ret;
 }
-EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
 
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
 {
@@ -315,6 +317,13 @@ bool usb_amd_prefetch_quirk(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
 
+bool usb_amd_quirk_pll_check(void)
+{
+	usb_amd_find_chipset_info();
+	return amd_chipset.need_pll_quirk;
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check);
+
 /*
  * The hardware normally enables the A-link power management feature, which
  * lets the system lower the power consumption in idle states.
@@ -520,7 +529,7 @@ void usb_amd_dev_put(void)
 	amd_chipset.nb_type = 0;
 	memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
 	amd_chipset.isoc_reqs = 0;
-	amd_chipset.probe_result = 0;
+	amd_chipset.need_pll_quirk = 0;
 
 	spin_unlock_irqrestore(&amd_lock, flags);
 
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 63c633077d9e..e729de21fad7 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -5,11 +5,11 @@
 #ifdef CONFIG_USB_PCI
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-int usb_amd_find_chipset_info(void);
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
 void usb_amd_dev_put(void);
+bool usb_amd_quirk_pll_check(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c2fe218e051f..1e0236e90687 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -130,7 +130,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_AMD_0x96_HOST;
 
 	/* AMD PLL quirk */
-	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7a264962a1a9..f5c41448d067 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2175,7 +2175,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb *urb)
 	if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
 	    usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
 	    urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
-	    !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+	    !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) &&
+	    !urb->num_sgs)
 		return true;
 
 	return false;
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 4d6ae3795a88..6ca9111d150a 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -375,7 +375,8 @@ out_err:
 
 #ifdef CONFIG_OF
 static void usb251xb_get_ports_field(struct usb251xb *hub,
-				    const char *prop_name, u8 port_cnt, u8 *fld)
+				    const char *prop_name, u8 port_cnt,
+				    bool ds_only, u8 *fld)
 {
 	struct device *dev = hub->dev;
 	struct property *prop;
@@ -383,7 +384,7 @@ static void usb251xb_get_ports_field(struct usb251xb *hub,
 	u32 port;
 
 	of_property_for_each_u32(dev->of_node, prop_name, prop, p, port) {
-		if ((port >= 1) && (port <= port_cnt))
+		if ((port >= ds_only ? 1 : 0) && (port <= port_cnt))
 			*fld |= BIT(port);
 		else
 			dev_warn(dev, "port %u doesn't exist\n", port);
@@ -501,15 +502,15 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 
 	hub->non_rem_dev = USB251XB_DEF_NON_REMOVABLE_DEVICES;
 	usb251xb_get_ports_field(hub, "non-removable-ports", data->port_cnt,
-				 &hub->non_rem_dev);
+				 true, &hub->non_rem_dev);
 
 	hub->port_disable_sp = USB251XB_DEF_PORT_DISABLE_SELF;
 	usb251xb_get_ports_field(hub, "sp-disabled-ports", data->port_cnt,
-				 &hub->port_disable_sp);
+				 true, &hub->port_disable_sp);
 
 	hub->port_disable_bp = USB251XB_DEF_PORT_DISABLE_BUS;
 	usb251xb_get_ports_field(hub, "bp-disabled-ports", data->port_cnt,
-				 &hub->port_disable_bp);
+				 true, &hub->port_disable_bp);
 
 	hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
 	if (!of_property_read_u32(np, "sp-max-total-current-microamp",
@@ -573,9 +574,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	 */
 	hub->port_swap = USB251XB_DEF_PORT_SWAP;
 	usb251xb_get_ports_field(hub, "swap-dx-lanes", data->port_cnt,
-				 &hub->port_swap);
-	if (of_get_property(np, "swap-us-lanes", NULL))
-		hub->port_swap |= BIT(0);
+				 false, &hub->port_swap);
 
 	/* The following parameters are currently not exposed to devicetree, but
 	 * may be as soon as needed.
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 30790240aec6..05b80211290d 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -28,6 +28,8 @@
  * status of a command.
  */
 
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 
@@ -99,6 +101,7 @@ static int slave_alloc (struct scsi_device *sdev)
 static int slave_configure(struct scsi_device *sdev)
 {
 	struct us_data *us = host_to_us(sdev->host);
+	struct device *dev = us->pusb_dev->bus->sysdev;
 
 	/*
 	 * Many devices have trouble transferring more than 32KB at a time,
@@ -128,6 +131,14 @@ static int slave_configure(struct scsi_device *sdev)
 		blk_queue_max_hw_sectors(sdev->request_queue, 2048);
 	}
 
+	/*
+	 * The max_hw_sectors should be up to maximum size of a mapping for
+	 * the device. Otherwise, a DMA API might fail on swiotlb environment.
+	 */
+	blk_queue_max_hw_sectors(sdev->request_queue,
+		min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
+		      dma_max_mapping_size(dev) >> SECTOR_SHIFT));
+
 	/*
 	 * Some USB host controllers can't do DMA; they have to use PIO.
 	 * They indicate this by setting their dma_mask to NULL.  For