[media] dvb_pll: DVB-S incorrect tune settings for dw2102/dm1105/cx88/opera1

This tuner PLL has missing initialisation settings resulting in
haphazard tuning. The PLL LPF was set to just 22000 symbol rate.

Basically, the module is a Sharp BS2F7HZ0194 (STV0299+IX2410)

I have had problems implementing the PLL in a new driver and
did not want to break the IX2410 out of the PLL.

This applies to DW2102, DM1105, CX88 and OPERA1 drivers.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Malcolm Priestley 2011-02-06 12:29:51 -03:00 committed by Mauro Carvalho Chehab
parent 92374e886c
commit 2b74334d12

View file

@ -64,6 +64,7 @@ struct dvb_pll_desc {
void (*set)(struct dvb_frontend *fe, u8 *buf,
const struct dvb_frontend_parameters *params);
u8 *initdata;
u8 *initdata2;
u8 *sleepdata;
int count;
struct {
@ -321,26 +322,73 @@ static struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = {
static void opera1_bw(struct dvb_frontend *fe, u8 *buf,
const struct dvb_frontend_parameters *params)
{
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
buf[2] |= 0x08;
struct dvb_pll_priv *priv = fe->tuner_priv;
u32 b_w = (params->u.qpsk.symbol_rate * 27) / 32000;
struct i2c_msg msg = {
.addr = priv->pll_i2c_address,
.flags = 0,
.buf = buf,
.len = 4
};
int result;
u8 lpf;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
result = i2c_transfer(priv->i2c, &msg, 1);
if (result != 1)
printk(KERN_ERR "%s: i2c_transfer failed:%d",
__func__, result);
if (b_w <= 10000)
lpf = 0xc;
else if (b_w <= 12000)
lpf = 0x2;
else if (b_w <= 14000)
lpf = 0xa;
else if (b_w <= 16000)
lpf = 0x6;
else if (b_w <= 18000)
lpf = 0xe;
else if (b_w <= 20000)
lpf = 0x1;
else if (b_w <= 22000)
lpf = 0x9;
else if (b_w <= 24000)
lpf = 0x5;
else if (b_w <= 26000)
lpf = 0xd;
else if (b_w <= 28000)
lpf = 0x3;
else
lpf = 0xb;
buf[2] ^= 0x1c; /* Flip bits 3-5 */
/* Set lpf */
buf[2] |= ((lpf >> 2) & 0x3) << 3;
buf[3] |= (lpf & 0x3) << 2;
return;
}
static struct dvb_pll_desc dvb_pll_opera1 = {
.name = "Opera Tuner",
.min = 900000,
.max = 2250000,
.initdata = (u8[]){ 4, 0x08, 0xe5, 0xe1, 0x00 },
.initdata2 = (u8[]){ 4, 0x08, 0xe5, 0xe5, 0x00 },
.iffreq= 0,
.set = opera1_bw,
.count = 8,
.entries = {
{ 1064000, 500, 0xe5, 0xc6 },
{ 1169000, 500, 0xe5, 0xe6 },
{ 1299000, 500, 0xe5, 0x24 },
{ 1444000, 500, 0xe5, 0x44 },
{ 1606000, 500, 0xe5, 0x64 },
{ 1777000, 500, 0xe5, 0x84 },
{ 1941000, 500, 0xe5, 0xa4 },
{ 2250000, 500, 0xe5, 0xc4 },
{ 1064000, 500, 0xf9, 0xc2 },
{ 1169000, 500, 0xf9, 0xe2 },
{ 1299000, 500, 0xf9, 0x20 },
{ 1444000, 500, 0xf9, 0x40 },
{ 1606000, 500, 0xf9, 0x60 },
{ 1777000, 500, 0xf9, 0x80 },
{ 1941000, 500, 0xf9, 0xa0 },
{ 2250000, 500, 0xf9, 0xc0 },
}
};
@ -648,8 +696,17 @@ static int dvb_pll_init(struct dvb_frontend *fe)
int result;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
result = i2c_transfer(priv->i2c, &msg, 1);
if (result != 1)
return result;
if (priv->pll_desc->initdata2) {
msg.buf = priv->pll_desc->initdata2 + 1;
msg.len = priv->pll_desc->initdata2[0];
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
result = i2c_transfer(priv->i2c, &msg, 1);
if (result != 1)
return result;
}
return 0;
}