Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Remove the 'module' Kconfig option for thermal subsystem framework
   because the thermal framework are required to be ready as early as
   possible to avoid overheat at boot time (Daniel Lezcano)

 - Fix a bug that thermal framework pokes disabled thermal zones upon
   resume (Wei Wang)

  - A couple of cleanups and trivial fixes on int340x thermal drivers
    (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  drivers: thermal: processor_thermal: Downgrade error message
  mlxsw: Remove obsolete dependency on THERMAL=m
  hwmon/drivers/core: Simplify complex dependency
  thermal/drivers/core: Fix typo in the option name
  thermal/drivers/core: Remove depends on THERMAL in Kconfig
  thermal/drivers/core: Remove module unload code
  thermal/drivers/core: Remove the module Kconfig's option
  thermal: core: skip update disabled thermal zones after suspend
  thermal: make device_register's type argument const
  thermal: intel: int340x: processor_thermal_device: simplify to get driver data
  thermal/int3403_thermal: favor _TMP instead of PTYP

arch/arm/configs/mini2440_defconfig

@@ -152,7 +152,7 @@ CONFIG_SPI_S3C24XX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_LM75=y
-CONFIG_THERMAL=m
+CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_FB=y

arch/arm/configs/pxa_defconfig

@@ -387,7 +387,7 @@ CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_LM95245=m
 CONFIG_SENSORS_NTC_THERMISTOR=m
-CONFIG_THERMAL=m
+CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_XILINX_WATCHDOG=m
 CONFIG_SA1100_WATCHDOG=m

arch/mips/configs/ip22_defconfig

@@ -228,7 +228,7 @@ CONFIG_SERIAL_IP22_ZILOG=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=m
 # CONFIG_HWMON is not set
-CONFIG_THERMAL=m
+CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_INDYDOG=m
 # CONFIG_VGA_CONSOLE is not set

arch/mips/configs/ip27_defconfig

@@ -271,7 +271,7 @@ CONFIG_I2C_PARPORT_LIGHT=m
 CONFIG_I2C_TAOS_EVM=m
 CONFIG_I2C_STUB=m
 # CONFIG_HWMON is not set
-CONFIG_THERMAL=m
+CONFIG_THERMAL=y
 CONFIG_MFD_PCF50633=m
 CONFIG_PCF50633_ADC=m
 CONFIG_PCF50633_GPIO=m

arch/unicore32/configs/unicore32_defconfig

@@ -119,7 +119,7 @@ CONFIG_I2C_PUV3=y
 #	Hardware Monitoring support
 #CONFIG_SENSORS_LM75=m
 #	Generic Thermal sysfs driver
-#CONFIG_THERMAL=m
+#CONFIG_THERMAL=y
 #CONFIG_THERMAL_HWMON=y
 
 #	Multimedia support

drivers/hwmon/hwmon.c

@@ -118,9 +118,7 @@ static DEFINE_IDA(hwmon_ida);
  * The complex conditional is necessary to avoid a cyclic dependency
  * between hwmon and thermal_sys modules.
  */
-#if IS_REACHABLE(CONFIG_THERMAL) && defined(CONFIG_THERMAL_OF) && \
-	(!defined(CONFIG_THERMAL_HWMON) || \
-	 !(defined(MODULE) && IS_MODULE(CONFIG_THERMAL)))
+#ifdef CONFIG_THERMAL_OF
 static int hwmon_thermal_get_temp(void *data, int *temp)
 {
 	struct hwmon_thermal_data *tdata = data;

drivers/net/ethernet/mellanox/mlxsw/Kconfig

@@ -22,7 +22,6 @@ config MLXSW_CORE_HWMON
 config MLXSW_CORE_THERMAL
 	bool "Thermal zone support for Mellanox Technologies Switch ASICs"
 	depends on MLXSW_CORE && THERMAL
-	depends on !(MLXSW_CORE=y && THERMAL=m)
 	default y
 	---help---
 	 Say Y here if you want to automatically control fans speed according

drivers/thermal/Kconfig

@@ -3,7 +3,7 @@
 #
 
 menuconfig THERMAL
-	tristate "Generic Thermal sysfs driver"
+	bool "Generic Thermal sysfs driver"
 	help
 	  Generic Thermal Sysfs driver offers a generic mechanism for
 	  thermal management. Usually it's made up of one or more thermal
@@ -11,7 +11,7 @@ menuconfig THERMAL
 	  Each thermal zone contains its own temperature, trip points,
 	  cooling devices.
 	  All platforms with ACPI thermal support can use this driver.
-	  If you want this support, you should say Y or M here.
+	  If you want this support, you should say Y here.
 
 if THERMAL
 
@@ -24,7 +24,6 @@ config THERMAL_STATISTICS
 
 config THERMAL_EMERGENCY_POWEROFF_DELAY_MS
 	int "Emergency poweroff delay in milli-seconds"
-	depends on THERMAL
 	default 0
 	help
 	  Thermal subsystem will issue a graceful shutdown when
@@ -149,10 +148,9 @@ config THERMAL_GOV_POWER_ALLOCATOR
 	  allocating and limiting power to devices.
 
 config CPU_THERMAL
-	bool "generic cpu cooling support"
+	bool "Generic cpu cooling support"
 	depends on CPU_FREQ
 	depends on THERMAL_OF
-	depends on THERMAL=y
 	help
 	  This implements the generic cpu cooling mechanism through frequency
 	  reduction. An ACPI version of this already exists

drivers/thermal/intel/Kconfig

@@ -1,6 +1,5 @@
 config INTEL_POWERCLAMP
 	tristate "Intel PowerClamp idle injection driver"
-	depends on THERMAL
 	depends on X86
 	depends on CPU_SUP_INTEL
 	help

drivers/thermal/intel/int340x_thermal/int3403_thermal.c

@@ -220,6 +220,7 @@ static int int3403_add(struct platform_device *pdev)
 {
 	struct int3403_priv *priv;
 	int result = 0;
+	unsigned long long tmp;
 	acpi_status status;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(struct int3403_priv),
@@ -234,19 +235,18 @@ static int int3403_add(struct platform_device *pdev)
 		goto err;
 	}
 
-	status = acpi_evaluate_integer(priv->adev->handle, "PTYP",
-				       NULL, &priv->type);
-	if (ACPI_FAILURE(status)) {
-		unsigned long long tmp;
 
-		status = acpi_evaluate_integer(priv->adev->handle, "_TMP",
-					       NULL, &tmp);
+	status = acpi_evaluate_integer(priv->adev->handle, "_TMP",
+				       NULL, &tmp);
+	if (ACPI_FAILURE(status)) {
+		status = acpi_evaluate_integer(priv->adev->handle, "PTYP",
+				       NULL, &priv->type);
 		if (ACPI_FAILURE(status)) {
 			result = -EINVAL;
 			goto err;
-		} else {
-			priv->type = INT3403_TYPE_SENSOR;
 		}
+	} else {
+		priv->type = INT3403_TYPE_SENSOR;
 	}
 
 	platform_set_drvdata(pdev, priv);

drivers/thermal/intel/int340x_thermal/processor_thermal_device.c

@@ -81,22 +81,13 @@ static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
 					struct device_attribute *attr, \
 					char *buf) \
 { \
-	struct pci_dev *pci_dev; \
-	struct platform_device *pdev; \
-	struct proc_thermal_device *proc_dev; \
+	struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); \
 	\
 	if (proc_thermal_emum_mode == PROC_THERMAL_NONE) { \
 		dev_warn(dev, "Attempted to get power limit before device was initialized!\n"); \
 		return 0; \
 	} \
 	\
-	if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { \
-		pdev = to_platform_device(dev); \
-		proc_dev = platform_get_drvdata(pdev); \
-	} else { \
-		pci_dev = to_pci_dev(dev); \
-		proc_dev = pci_get_drvdata(pci_dev); \
-	} \
 	return sprintf(buf, "%lu\n",\
 	(unsigned long)proc_dev->power_limits[index].suffix * 1000); \
 }
@@ -274,7 +265,7 @@ static void proc_thermal_notify(acpi_handle handle, u32 event, void *data)
 				THERMAL_DEVICE_POWER_CAPABILITY_CHANGED);
 		break;
 	default:
-		dev_err(proc_priv->dev, "Unsupported event [0x%x]\n", event);
+		dev_dbg(proc_priv->dev, "Unsupported event [0x%x]\n", event);
 		break;
 	}
 }

drivers/thermal/qcom/Kconfig

@@ -1,6 +1,5 @@
 config QCOM_TSENS
 	tristate "Qualcomm TSENS Temperature Alarm"
-	depends on THERMAL
 	depends on QCOM_QFPROM
 	depends on ARCH_QCOM || COMPILE_TEST
 	help

drivers/thermal/thermal_core.c

@@ -266,7 +266,7 @@ static int __init thermal_register_governors(void)
 	return thermal_gov_power_allocator_register();
 }
 
-static void thermal_unregister_governors(void)
+static void __init thermal_unregister_governors(void)
 {
 	thermal_gov_step_wise_unregister();
 	thermal_gov_fair_share_unregister();
@@ -941,7 +941,7 @@ static void bind_cdev(struct thermal_cooling_device *cdev)
  */
 static struct thermal_cooling_device *
 __thermal_cooling_device_register(struct device_node *np,
-				  char *type, void *devdata,
+				  const char *type, void *devdata,
 				  const struct thermal_cooling_device_ops *ops)
 {
 	struct thermal_cooling_device *cdev;
@@ -1015,7 +1015,7 @@ __thermal_cooling_device_register(struct device_node *np,
  * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
  */
 struct thermal_cooling_device *
-thermal_cooling_device_register(char *type, void *devdata,
+thermal_cooling_device_register(const char *type, void *devdata,
 				const struct thermal_cooling_device_ops *ops)
 {
 	return __thermal_cooling_device_register(NULL, type, devdata, ops);
@@ -1039,7 +1039,7 @@ EXPORT_SYMBOL_GPL(thermal_cooling_device_register);
  */
 struct thermal_cooling_device *
 thermal_of_cooling_device_register(struct device_node *np,
-				   char *type, void *devdata,
+				   const char *type, void *devdata,
 				   const struct thermal_cooling_device_ops *ops)
 {
 	return __thermal_cooling_device_register(np, type, devdata, ops);
@@ -1543,6 +1543,7 @@ static int thermal_pm_notify(struct notifier_block *nb,
 			     unsigned long mode, void *_unused)
 {
 	struct thermal_zone_device *tz;
+	enum thermal_device_mode tz_mode;
 
 	switch (mode) {
 	case PM_HIBERNATION_PREPARE:
@@ -1555,6 +1556,13 @@ static int thermal_pm_notify(struct notifier_block *nb,
 	case PM_POST_SUSPEND:
 		atomic_set(&in_suspend, 0);
 		list_for_each_entry(tz, &thermal_tz_list, node) {
+			tz_mode = THERMAL_DEVICE_ENABLED;
+			if (tz->ops->get_mode)
+				tz->ops->get_mode(tz, &tz_mode);
+
+			if (tz_mode == THERMAL_DEVICE_DISABLED)
+				continue;
+
 			thermal_zone_device_init(tz);
 			thermal_zone_device_update(tz,
 						   THERMAL_EVENT_UNSPECIFIED);
@@ -1612,19 +1620,4 @@ error:
 	mutex_destroy(&poweroff_lock);
 	return result;
 }
-
-static void __exit thermal_exit(void)
-{
-	unregister_pm_notifier(&thermal_pm_nb);
-	of_thermal_destroy_zones();
-	genetlink_exit();
-	class_unregister(&thermal_class);
-	thermal_unregister_governors();
-	ida_destroy(&thermal_tz_ida);
-	ida_destroy(&thermal_cdev_ida);
-	mutex_destroy(&thermal_list_lock);
-	mutex_destroy(&thermal_governor_lock);
-}
-
 fs_initcall(thermal_init);
-module_exit(thermal_exit);

include/linux/thermal.h

@@ -442,10 +442,10 @@ void thermal_zone_device_update(struct thermal_zone_device *,
 				enum thermal_notify_event);
 void thermal_zone_set_trips(struct thermal_zone_device *);
 
-struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
-		const struct thermal_cooling_device_ops *);
+struct thermal_cooling_device *thermal_cooling_device_register(const char *,
+		void *, const struct thermal_cooling_device_ops *);
 struct thermal_cooling_device *
-thermal_of_cooling_device_register(struct device_node *np, char *, void *,
+thermal_of_cooling_device_register(struct device_node *np, const char *, void *,
 				   const struct thermal_cooling_device_ops *);
 struct thermal_cooling_device *
 devm_thermal_of_cooling_device_register(struct device *dev,