redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'tracing/urgent' into tracing/core 

Merge reason: Pick up tracing/filters fix from the urgent queue,
              we will queue up dependent patches.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
hifive-unleashed-5.1
Ingo Molnar 2009-10-13 09:24:51 +02:00
parent 3c355863fb 8ad807318f
commit 2c96c142e9
327 changed files with 5520 additions and 1972 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/SubmittingPatches
View File

@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched.
When sending patches to Linus, always follow step #7.
Large changes are not appropriate for mailing lists, and some
maintainers. If your patch, uncompressed, exceeds 40 kB in size,
maintainers. If your patch, uncompressed, exceeds 300 kB in size,
it is preferred that you store your patch on an Internet-accessible
server, and provide instead a URL (link) pointing to your patch.

10
Documentation/arm/tcm.txt
View File

@ -29,11 +29,13 @@ TCM location and size. Notice that this is not a MMU table: you
actually move the physical location of the TCM around. At the
place you put it, it will mask any underlying RAM from the
CPU so it is usually wise not to overlap any physical RAM with
the TCM. The TCM memory exists totally outside the MMU and will
override any MMU mappings.
the TCM.
Code executing inside the ITCM does not "see" any MMU mappings
and e.g. register accesses must be made to physical addresses.
The TCM memory can then be remapped to another address again using
the MMU, but notice that the TCM if often used in situations where
the MMU is turned off. To avoid confusion the current Linux
implementation will map the TCM 1 to 1 from physical to virtual
memory in the location specified by the machine.
TCM is used for a few things:

2
Documentation/connector/cn_test.c
View File

@ -34,7 +34,7 @@ static char cn_test_name[] = "cn_test";
static struct sock *nls;
static struct timer_list cn_test_timer;
static void cn_test_callback(struct cn_msg *msg)
static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
__func__, jiffies, msg->id.idx, msg->id.val,

8
Documentation/connector/connector.txt
View File

@ -23,7 +23,7 @@ handling, etc... The Connector driver allows any kernelspace agents to use
netlink based networking for inter-process communication in a significantly
easier way:
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
struct cb_id
@ -53,15 +53,15 @@ struct cn_msg
Connector interfaces.
/*****************************************/
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
Registers new callback with connector core.
struct cb_id *id - unique connector's user identifier.
It must be registered in connector.h for legal in-kernel users.
char *name - connector's callback symbolic name.
void (*callback) (void *) - connector's callback.
Argument must be dereferenced to struct cn_msg *.
void (*callback) (struct cn..) - connector's callback.
cn_msg and the sender's credentials
void cn_del_callback(struct cb_id *id);

2
Documentation/networking/timestamping/timestamping.c
View File

@ -381,7 +381,7 @@ int main(int argc, char **argv)
memset(&hwtstamp, 0, sizeof(hwtstamp));
strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
hwtstamp.ifr_data = (void *)&hwconfig;
memset(&hwconfig, 0, sizeof(&hwconfig));
memset(&hwconfig, 0, sizeof(hwconfig));
hwconfig.tx_type =
(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;

1
Documentation/sound/alsa/HD-Audio-Models.txt
View File

@ -209,6 +209,7 @@ AD1884A / AD1883 / AD1984A / AD1984B
laptop laptop with HP jack sensing
mobile mobile devices with HP jack sensing
thinkpad Lenovo Thinkpad X300
touchsmart HP Touchsmart
AD1884
======

29
MAINTAINERS
View File

@ -646,24 +646,24 @@ ARM/INTEL IOP32X ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Maintained
ARM/INTEL IOP33X ARM ARCHITECTURE
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Maintained
ARM/INTEL IOP13XX ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Maintained
ARM/INTEL IQ81342EX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Maintained
ARM/INTEL IXP2000 ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
@ -691,7 +691,7 @@ ARM/INTEL XSC3 (MANZANO) ARM CORE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Maintained
ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
@ -741,23 +741,36 @@ M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
M: Marek Vasut <marek.vasut@gmail.com>
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
F: arch/arm/mach-pxa/include/mach/palmtx.h
F: arch/arm/mach-pxa/palmtx.c
F: arch/arm/mach-pxa/include/mach/palmt5.h
F: arch/arm/mach-pxa/palmt5.c
F: arch/arm/mach-pxa/include/mach/palmld.h
F: arch/arm/mach-pxa/palmld.c
F: arch/arm/mach-pxa/include/mach/palmte2.h
F: arch/arm/mach-pxa/palmte2.c
F: arch/arm/mach-pxa/include/mach/palmtc.h
F: arch/arm/mach-pxa/palmtc.c
ARM/PALM TREO 680 SUPPORT
M: Tomas Cech <sleep_walker@suse.cz>
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
F: arch/arm/mach-pxa/include/mach/treo680.h
F: arch/arm/mach-pxa/treo680.c
ARM/PALMZ72 SUPPORT
M: Sergey Lapin <slapin@ossfans.org>
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
F: arch/arm/mach-pxa/include/mach/palmz72.h
F: arch/arm/mach-pxa/palmz72.c
ARM/PLEB SUPPORT
M: Peter Chubb <pleb@gelato.unsw.edu.au>
@ -2682,7 +2695,7 @@ F: include/linux/intel-iommu.h
INTEL IOP-ADMA DMA DRIVER
M: Dan Williams <dan.j.williams@intel.com>
S: Supported
S: Maintained
F: drivers/dma/iop-adma.c
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT

25
arch/arm/common/sa1111.c
View File

@ -1032,6 +1032,7 @@ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
return __sa1111_pll_clock(sachip);
}
EXPORT_SYMBOL(sa1111_pll_clock);
/**
* sa1111_select_audio_mode - select I2S or AC link mode
@ -1059,6 +1060,7 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
spin_unlock_irqrestore(&sachip->lock, flags);
}
EXPORT_SYMBOL(sa1111_select_audio_mode);
/**
* sa1111_set_audio_rate - set the audio sample rate
@ -1083,6 +1085,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
return 0;
}
EXPORT_SYMBOL(sa1111_set_audio_rate);
/**
* sa1111_get_audio_rate - get the audio sample rate
@ -1100,6 +1103,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
return __sa1111_pll_clock(sachip) / (256 * div);
}
EXPORT_SYMBOL(sa1111_get_audio_rate);
void sa1111_set_io_dir(struct sa1111_dev *sadev,
unsigned int bits, unsigned int dir,
@ -1128,6 +1132,7 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev,
MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
spin_unlock_irqrestore(&sachip->lock, flags);
}
EXPORT_SYMBOL(sa1111_set_io_dir);
void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
{
@ -1142,6 +1147,7 @@ void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
spin_unlock_irqrestore(&sachip->lock, flags);
}
EXPORT_SYMBOL(sa1111_set_io);
void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
{
@ -1156,6 +1162,7 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
spin_unlock_irqrestore(&sachip->lock, flags);
}
EXPORT_SYMBOL(sa1111_set_sleep_io);
/*
* Individual device operations.
@ -1176,6 +1183,7 @@ void sa1111_enable_device(struct sa1111_dev *sadev)
sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
}
EXPORT_SYMBOL(sa1111_enable_device);
/**
* sa1111_disable_device - disable an on-chip SA1111 function block
@ -1192,6 +1200,7 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
}
EXPORT_SYMBOL(sa1111_disable_device);
/*
* SA1111 "Register Access Bus."
@ -1259,17 +1268,20 @@ struct bus_type sa1111_bus_type = {
.suspend = sa1111_bus_suspend,
.resume = sa1111_bus_resume,
};
EXPORT_SYMBOL(sa1111_bus_type);
int sa1111_driver_register(struct sa1111_driver *driver)
{
driver->drv.bus = &sa1111_bus_type;
return driver_register(&driver->drv);
}
EXPORT_SYMBOL(sa1111_driver_register);
void sa1111_driver_unregister(struct sa1111_driver *driver)
{
driver_unregister(&driver->drv);
}
EXPORT_SYMBOL(sa1111_driver_unregister);
static int __init sa1111_init(void)
{
@ -1290,16 +1302,3 @@ module_exit(sa1111_exit);
MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(sa1111_select_audio_mode);
EXPORT_SYMBOL(sa1111_set_audio_rate);
EXPORT_SYMBOL(sa1111_get_audio_rate);
EXPORT_SYMBOL(sa1111_set_io_dir);
EXPORT_SYMBOL(sa1111_set_io);
EXPORT_SYMBOL(sa1111_set_sleep_io);
EXPORT_SYMBOL(sa1111_enable_device);
EXPORT_SYMBOL(sa1111_disable_device);
EXPORT_SYMBOL(sa1111_pll_clock);
EXPORT_SYMBOL(sa1111_bus_type);
EXPORT_SYMBOL(sa1111_driver_register);
EXPORT_SYMBOL(sa1111_driver_unregister);

1
arch/arm/configs/h3600_defconfig
View File

@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
CONFIG_SA1100_H3600=y
CONFIG_SA1100_H3XXX=y
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set

558
arch/arm/configs/iop33x_defconfig
View File

File diff suppressed because it is too large Load Diff

26
arch/arm/include/asm/glue.h
View File

@ -120,25 +120,39 @@
#endif
/*
* Prefetch abort handler. If the CPU has an IFAR use that, otherwise
* use the address of the aborted instruction
* Prefetch Abort Model
* ================
*
* We have the following to choose from:
* legacy - no IFSR, no IFAR
* v6 - ARMv6: IFSR, no IFAR
* v7 - ARMv7: IFSR and IFAR
*/
#undef CPU_PABORT_HANDLER
#undef MULTI_PABORT
#ifdef CONFIG_CPU_PABRT_IFAR
#ifdef CONFIG_CPU_PABRT_LEGACY
# ifdef CPU_PABORT_HANDLER
# define MULTI_PABORT 1
# else
# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2
# define CPU_PABORT_HANDLER legacy_pabort
# endif
#endif
#ifdef CONFIG_CPU_PABRT_NOIFAR
#ifdef CONFIG_CPU_PABRT_V6
# ifdef CPU_PABORT_HANDLER
# define MULTI_PABORT 1
# else
# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn
# define CPU_PABORT_HANDLER v6_pabort
# endif
#endif
#ifdef CONFIG_CPU_PABRT_V7
# ifdef CPU_PABORT_HANDLER
# define MULTI_PABORT 1
# else
# define CPU_PABORT_HANDLER v7_pabort
# endif
#endif

1
arch/arm/include/asm/hardware/iop3xx.h
View File

@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void);
* IOP3XX I/O and Mem space regions for PCI autoconfiguration
*/
#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000
#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000
#define IOP3XX_PCI_LOWER_IO_PA 0x90000000

16
arch/arm/include/asm/smp_plat.h 100644
View File

@ -0,0 +1,16 @@
/*
* ARM specific SMP header, this contains our implementation
* details.
*/
#ifndef __ASMARM_SMP_PLAT_H
#define __ASMARM_SMP_PLAT_H
#include <asm/cputype.h>
/* all SMP configurations have the extended CPUID registers */
static inline int tlb_ops_need_broadcast(void)
{
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
#endif

1
arch/arm/include/asm/unistd.h
View File

@ -456,6 +456,7 @@
* Unimplemented (or alternatively implemented) syscalls
*/
#define __IGNORE_fadvise64_64 1
#define __IGNORE_migrate_pages 1
#endif /* __KERNEL__ */
#endif /* __ASM_ARM_UNISTD_H */

18
arch/arm/kernel/entry-armv.S
View File

@ -311,22 +311,16 @@ __pabt_svc:
tst r3, #PSR_I_BIT
biceq r9, r9, #PSR_I_BIT
@
@ set args, then call main handler
@
@ r0 - address of faulting instruction
@ r1 - pointer to registers on stack
@
#ifdef MULTI_PABORT
mov r0, r2 @ pass address of aborted instruction.
#ifdef MULTI_PABORT
ldr r4, .LCprocfns
mov lr, pc
ldr pc, [r4, #PROCESSOR_PABT_FUNC]
#else
CPU_PABORT_HANDLER(r0, r2)
bl CPU_PABORT_HANDLER
#endif
msr cpsr_c, r9 @ Maybe enable interrupts
mov r1, sp @ regs
mov r2, sp @ regs
bl do_PrefetchAbort @ call abort handler
@
@ -701,16 +695,16 @@ ENDPROC(__und_usr_unknown)
__pabt_usr:
usr_entry
#ifdef MULTI_PABORT
mov r0, r2 @ pass address of aborted instruction.
#ifdef MULTI_PABORT
ldr r4, .LCprocfns
mov lr, pc
ldr pc, [r4, #PROCESSOR_PABT_FUNC]
#else
CPU_PABORT_HANDLER(r0, r2)
bl CPU_PABORT_HANDLER
#endif
enable_irq @ Enable interrupts
mov r1, sp @ regs
mov r2, sp @ regs
bl do_PrefetchAbort @ call abort handler
UNWIND(.fnend )
/* fall through */

11
arch/arm/kernel/entry-common.S
View File

@ -126,7 +126,7 @@ ENTRY(__gnu_mcount_nc)
cmp r0, r2
bne gnu_trace
ldmia sp!, {r0-r3, ip, lr}
bx ip
mov pc, ip
gnu_trace:
ldr r1, [sp, #20] @ lr of instrumented routine
@ -135,7 +135,7 @@ gnu_trace:
mov lr, pc
mov pc, r2
ldmia sp!, {r0-r3, ip, lr}
bx ip
mov pc, ip
ENTRY(mcount)
stmdb sp!, {r0-r3, lr}
@ -425,13 +425,6 @@ sys_mmap2:
#endif
ENDPROC(sys_mmap2)
ENTRY(pabort_ifar)
mrc p15, 0, r0, cr6, cr0, 2
ENTRY(pabort_noifar)
mov pc, lr
ENDPROC(pabort_ifar)
ENDPROC(pabort_noifar)
#ifdef CONFIG_OABI_COMPAT
/*

4
arch/arm/kernel/head-common.S
View File

@ -13,6 +13,7 @@
#define ATAG_CORE 0x54410001
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
.align 2
.type __switch_data, %object
@ -251,7 +252,8 @@ __vet_atags:
bne 1f
ldr r5, [r2, #0] @ is first tag ATAG_CORE?
subs r5, r5, #ATAG_CORE_SIZE
cmp r5, #ATAG_CORE_SIZE
cmpne r5, #ATAG_CORE_SIZE_EMPTY
bne 1f
ldr r5, [r2, #4]
ldr r6, =ATAG_CORE

13
arch/arm/kernel/smp.c
View File

@ -36,6 +36,7 @@
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
#include <asm/localtimer.h>
#include <asm/smp_plat.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
@ -153,7 +154,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
/*
* __cpu_disable runs on the processor to be shutdown.
*/
int __cpuexit __cpu_disable(void)
int __cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
struct task_struct *p;
@ -200,7 +201,7 @@ int __cpuexit __cpu_disable(void)
* called on the thread which is asking for a CPU to be shutdown -
* waits until shutdown has completed, or it is timed out.
*/
void __cpuexit __cpu_die(unsigned int cpu)
void __cpu_die(unsigned int cpu)
{
if (!platform_cpu_kill(cpu))
printk("CPU%u: unable to kill\n", cpu);
@ -214,7 +215,7 @@ void __cpuexit __cpu_die(unsigned int cpu)
* of the other hotplug-cpu capable cores, so presumably coming
* out of idle fixes this.
*/
void __cpuexit cpu_die(void)
void __ref cpu_die(void)
{
unsigned int cpu = smp_processor_id();
@ -586,12 +587,6 @@ struct tlb_args {
unsigned long ta_end;
};
/* all SMP configurations have the extended CPUID registers */
static inline int tlb_ops_need_broadcast(void)
{
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
static inline void ipi_flush_tlb_all(void *ignored)
{
local_flush_tlb_all();

4
arch/arm/kernel/smp_twd.c
View File

@ -166,10 +166,12 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
clockevents_register_device(clk);
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* take a local timer down
*/
void __cpuexit twd_timer_stop(void)
void twd_timer_stop(void)
{
__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
}
#endif

5
arch/arm/kernel/traps.c
View File

@ -418,12 +418,14 @@ static int bad_syscall(int n, struct pt_regs *regs)
static inline void
do_cache_op(unsigned long start, unsigned long end, int flags)
{
struct mm_struct *mm = current->active_mm;
struct vm_area_struct *vma;
if (end < start || flags)
return;
vma = find_vma(current->active_mm, start);
down_read(&mm->mmap_sem);
vma = find_vma(mm, start);
if (vma && vma->vm_start < end) {
if (start < vma->vm_start)
start = vma->vm_start;
@ -432,6 +434,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
flush_cache_user_range(vma, start, end);
}
up_read(&mm->mmap_sem);
}
/*

2
arch/arm/mach-bcmring/core.c
View File

@ -31,7 +31,6 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/amba/bus.h>
#include <mach/csp/mm_addr.h>
#include <mach/hardware.h>
#include <asm/clkdev.h>
@ -45,7 +44,6 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/mach/mmc.h>
#include <cfg_global.h>

1
arch/arm/mach-davinci/board-dm365-evm.c
View File

@ -35,7 +35,6 @@
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/mmc.h>
#include <mach/nand.h>

2
arch/arm/mach-integrator/pci_v3.c
View File

@ -486,7 +486,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
return ret;
}
struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
{
return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
}

2
arch/arm/mach-iop32x/include/mach/iop32x.h
View File

@ -31,7 +31,5 @@
#define IOP32X_MAX_RAM_SIZE 0x40000000UL
#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE
#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000
#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000
#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE
#endif

2
arch/arm/mach-iop33x/include/mach/iop33x.h
View File

@ -36,8 +36,6 @@
#define IOP33X_MAX_RAM_SIZE 0x80000000UL
#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE
#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000
#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE
#endif

2
arch/arm/mach-ns9xxx/clock.c
View File

@ -195,7 +195,7 @@ static int clk_debugfs_open(struct inode *inode, struct file *file)
return single_open(file, clk_debugfs_show, NULL);
}
static struct file_operations clk_debugfs_operations = {
static const struct file_operations clk_debugfs_operations = {
.open = clk_debugfs_open,
.read = seq_read,
.llseek = seq_lseek,

5
arch/arm/mach-sa1100/Kconfig
View File

@ -71,11 +71,6 @@ config SA1100_H3600
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
<http://www.compaq.com/products/handhelds/pocketpc/>
config SA1100_H3XXX
bool
depends on SA1100_H3100 || SA1100_H3600
default y
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
select SA1111

2
arch/arm/mach-sa1100/time.c
View File

@ -77,7 +77,7 @@ static struct clock_event_device ckevt_sa1100_osmr0 = {
.set_mode = sa1100_osmr0_set_mode,
};
static cycle_t sa1100_read_oscr(void)
static cycle_t sa1100_read_oscr(struct clocksource *s)
{
return OSCR;
}

10
arch/arm/mach-u300/gpio.c
View File

@ -281,6 +281,16 @@ int gpio_unregister_callback(unsigned gpio)
}
EXPORT_SYMBOL(gpio_unregister_callback);
/* Non-zero means valid */
int gpio_is_valid(int number)
{
if (number >= 0 &&
number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
return 1;
return 0;
}
EXPORT_SYMBOL(gpio_is_valid);
int gpio_request(unsigned gpio, const char *label)
{
if (gpio_pin[gpio].users)

1
arch/arm/mach-u300/include/mach/gpio.h
View File

@ -258,6 +258,7 @@
#define PIN_TO_PORT(val) (val >> 3)
/* These can be found in arch/arm/mach-u300/gpio.c */
extern int gpio_is_valid(int number);
extern int gpio_request(unsigned gpio, const char *label);
extern void gpio_free(unsigned gpio);
extern int gpio_direction_input(unsigned gpio);

57
arch/arm/mm/Kconfig
View File

@ -17,7 +17,7 @@ config CPU_ARM610
select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
help
The ARM610 is the successor to the ARM3 processor
and was produced by VLSI Technology Inc.
@ -31,7 +31,7 @@ config CPU_ARM7TDMI
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4
help
A 32-bit RISC microprocessor based on the ARM7 processor core
@ -49,7 +49,7 @@ config CPU_ARM710
select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
help
A 32-bit RISC microprocessor based on the ARM7 processor core
designed by Advanced RISC Machines Ltd. The ARM710 is the
@ -64,7 +64,7 @@ config CPU_ARM720T
bool "Support ARM720T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4
select CPU_CACHE_VIVT
select CPU_CP15_MMU
@ -83,7 +83,7 @@ config CPU_ARM740T
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V3 # although the core is v4t
select CPU_CP15_MPU
help
@ -100,7 +100,7 @@ config CPU_ARM9TDMI
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4
help
A 32-bit RISC microprocessor based on the ARM9 processor core
@ -114,7 +114,7 @@ config CPU_ARM920T
bool "Support ARM920T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
@ -135,7 +135,7 @@ config CPU_ARM922T
bool "Support ARM922T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
@ -154,7 +154,7 @@ config CPU_ARM925T
bool "Support ARM925T processor" if ARCH_OMAP1
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
@ -173,7 +173,7 @@ config CPU_ARM926T
bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
@ -191,7 +191,7 @@ config CPU_FA526
bool
select CPU_32v4
select CPU_ABRT_EV4
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_CACHE_FA
@ -210,7 +210,7 @@ config CPU_ARM940T
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
help
@ -228,7 +228,7 @@ config CPU_ARM946E
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
help
@ -244,7 +244,7 @@ config CPU_ARM1020
bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
@ -262,7 +262,7 @@ config CPU_ARM1020E
bool "Support ARM1020E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
@ -275,7 +275,7 @@ config CPU_ARM1022
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
@ -293,7 +293,7 @@ config CPU_ARM1026
bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
@ -311,7 +311,7 @@ config CPU_SA110
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
select CPU_ABRT_EV4
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
@ -331,7 +331,7 @@ config CPU_SA1100
bool
select CPU_32v4
select CPU_ABRT_EV4
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
@ -342,7 +342,7 @@ config CPU_XSCALE
bool
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
@ -352,7 +352,7 @@ config CPU_XSC3
bool
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
@ -363,7 +363,7 @@ config CPU_MOHAWK
bool
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
@ -374,7 +374,7 @@ config CPU_FEROCEON
bool
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_NOIFAR
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_FEROCEON if MMU
@ -394,7 +394,7 @@ config CPU_V6
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_NOIFAR
select CPU_PABRT_V6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
select CPU_CP15_MMU
@ -420,7 +420,7 @@ config CPU_V7
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
select CPU_PABRT_IFAR
select CPU_PABRT_V7
select CPU_CACHE_V7
select CPU_CACHE_VIPT
select CPU_CP15_MMU
@ -482,10 +482,13 @@ config CPU_ABRT_EV6
config CPU_ABRT_EV7
bool
config CPU_PABRT_IFAR
config CPU_PABRT_LEGACY
bool
config CPU_PABRT_NOIFAR
config CPU_PABRT_V6
bool
config CPU_PABRT_V7
bool
# The cache model

4
arch/arm/mm/Makefile
View File

@ -27,6 +27,10 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ) += abort-ev5tj.o
obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o
obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o
obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o
obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o
obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o
obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o

53
arch/arm/mm/fault.c
View File

@ -519,9 +519,58 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
arm_notify_die("", regs, &info, fsr, 0);
}
static struct fsr_info ifsr_info[] = {
{ do_bad, SIGBUS, 0, "unknown 0" },
{ do_bad, SIGBUS, 0, "unknown 1" },
{ do_bad, SIGBUS, 0, "debug event" },
{ do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" },
{ do_bad, SIGBUS, 0, "unknown 4" },
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
{ do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" },
{ do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
{ do_bad, SIGBUS, 0, "external abort on non-linefetch" },
{ do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
{ do_bad, SIGBUS, 0, "unknown 10" },
{ do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
{ do_bad, SIGBUS, 0, "external abort on translation" },
{ do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
{ do_bad, SIGBUS, 0, "external abort on translation" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
{ do_bad, SIGBUS, 0, "unknown 16" },
{ do_bad, SIGBUS, 0, "unknown 17" },
{ do_bad, SIGBUS, 0, "unknown 18" },
{ do_bad, SIGBUS, 0, "unknown 19" },
{ do_bad, SIGBUS, 0, "unknown 20" },
{ do_bad, SIGBUS, 0, "unknown 21" },
{ do_bad, SIGBUS, 0, "unknown 22" },
{ do_bad, SIGBUS, 0, "unknown 23" },
{ do_bad, SIGBUS, 0, "unknown 24" },
{ do_bad, SIGBUS, 0, "unknown 25" },
{ do_bad, SIGBUS, 0, "unknown 26" },
{ do_bad, SIGBUS, 0, "unknown 27" },
{ do_bad, SIGBUS, 0, "unknown 28" },
{ do_bad, SIGBUS, 0, "unknown 29" },
{ do_bad, SIGBUS, 0, "unknown 30" },
{ do_bad, SIGBUS, 0, "unknown 31" },
};
asmlinkage void __exception
do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
{
do_translation_fault(addr, FSR_LNX_PF, regs);
const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);
struct siginfo info;
if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
return;
printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
inf->name, ifsr, addr);
info.si_signo = inf->sig;
info.si_errno = 0;
info.si_code = inf->code;
info.si_addr = (void __user *)addr;
arm_notify_die("", regs, &info, ifsr, 0);
}

2
arch/arm/mm/mmap.c
View File

@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
{
if (addr < PHYS_OFFSET)
return 0;
if (addr + size >= __pa(high_memory - 1))
if (addr + size > __pa(high_memory - 1) + 1)
return 0;
return 1;

39
arch/arm/mm/mmu.c
View File

@ -21,6 +21,7 @@
#include <asm/cachetype.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/smp_plat.h>
#include <asm/tlb.h>
#include <asm/highmem.h>
@ -709,10 +710,6 @@ static void __init sanity_check_meminfo(void)
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
"ignoring high memory\n");
} else if (cache_is_vipt_aliasing()) {
printk(KERN_CRIT "HIGHMEM is not yet supported "
"with VIPT aliasing cache, "
"ignoring high memory\n");
} else {
memmove(bank + 1, bank,
(meminfo.nr_banks - i) * sizeof(*bank));
@ -726,6 +723,8 @@ static void __init sanity_check_meminfo(void)
bank->size = VMALLOC_MIN - __va(bank->start);
}
#else
bank->highmem = highmem;
/*
* Check whether this memory bank would entirely overlap
* the vmalloc area.
@ -754,6 +753,38 @@ static void __init sanity_check_meminfo(void)
#endif
j++;
}
#ifdef CONFIG_HIGHMEM
if (highmem) {
const char *reason = NULL;
if (cache_is_vipt_aliasing()) {
/*
* Interactions between kmap and other mappings
* make highmem support with aliasing VIPT caches
* rather difficult.
*/
reason = "with VIPT aliasing cache";
#ifdef CONFIG_SMP
} else if (tlb_ops_need_broadcast()) {
/*
* kmap_high needs to occasionally flush TLB entries,
* however, if the TLB entries need to be broadcast
* we may deadlock:
* kmap_high(irqs off)->flush_all_zero_pkmaps->
* flush_tlb_kernel_range->smp_call_function_many
* (must not be called with irqs off)
*/
reason = "without hardware TLB ops broadcasting";
#endif
}
if (reason) {
printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
reason);
while (j > 0 && meminfo.bank[j - 1].highmem)
j--;
}
}
#endif
meminfo.nr_banks = j;
}

19
arch/arm/mm/pabort-legacy.S 100644
View File

@ -0,0 +1,19 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Function: legacy_pabort
*
* Params : r0 = address of aborted instruction
*
* Returns : r0 = address of abort
* : r1 = Simulated IFSR with section translation fault status
*
* Purpose : obtain information about current prefetch abort.
*/
.align 5
ENTRY(legacy_pabort)
mov r1, #5
mov pc, lr
ENDPROC(legacy_pabort)

19
arch/arm/mm/pabort-v6.S 100644
View File

@ -0,0 +1,19 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Function: v6_pabort
*
* Params : r0 = address of aborted instruction
*
* Returns : r0 = address of abort
* : r1 = IFSR
*
* Purpose : obtain information about current prefetch abort.
*/
.align 5
ENTRY(v6_pabort)
mrc p15, 0, r1, c5, c0, 1 @ get IFSR
mov pc, lr
ENDPROC(v6_pabort)

20
arch/arm/mm/pabort-v7.S 100644
View File

@ -0,0 +1,20 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Function: v6_pabort
*
* Params : r0 = address of aborted instruction
*
* Returns : r0 = address of abort
* : r1 = IFSR
*
* Purpose : obtain information about current prefetch abort.
*/
.align 5
ENTRY(v7_pabort)
mrc p15, 0, r0, c6, c0, 2 @ get IFAR
mrc p15, 0, r1, c5, c0, 1 @ get IFSR
mov pc, lr
ENDPROC(v7_pabort)

2
arch/arm/mm/proc-arm1020.S
View File

@ -449,7 +449,7 @@ arm1020_crval:
.type arm1020_processor_functions, #object
arm1020_processor_functions:
.word v4t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm1020_proc_init
.word cpu_arm1020_proc_fin
.word cpu_arm1020_reset

2
arch/arm/mm/proc-arm1020e.S
View File

@ -430,7 +430,7 @@ arm1020e_crval:
.type arm1020e_processor_functions, #object
arm1020e_processor_functions:
.word v4t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm1020e_proc_init
.word cpu_arm1020e_proc_fin
.word cpu_arm1020e_reset

2
arch/arm/mm/proc-arm1022.S
View File

@ -413,7 +413,7 @@ arm1022_crval:
.type arm1022_processor_functions, #object
arm1022_processor_functions:
.word v4t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm1022_proc_init
.word cpu_arm1022_proc_fin
.word cpu_arm1022_reset

2
arch/arm/mm/proc-arm1026.S
View File

@ -408,7 +408,7 @@ arm1026_crval:
.type arm1026_processor_functions, #object
arm1026_processor_functions:
.word v5t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm1026_proc_init
.word cpu_arm1026_proc_fin
.word cpu_arm1026_reset

4
arch/arm/mm/proc-arm6_7.S
View File

@ -278,7 +278,7 @@ __arm7_setup: mov r0, #0
.type arm6_processor_functions, #object
ENTRY(arm6_processor_functions)
.word cpu_arm6_data_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm6_proc_init
.word cpu_arm6_proc_fin
.word cpu_arm6_reset
@ -295,7 +295,7 @@ ENTRY(arm6_processor_functions)
.type arm7_processor_functions, #object
ENTRY(arm7_processor_functions)
.word cpu_arm7_data_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm7_proc_init
.word cpu_arm7_proc_fin
.word cpu_arm7_reset

2
arch/arm/mm/proc-arm720.S
View File

@ -181,7 +181,7 @@ arm720_crval:
.type arm720_processor_functions, #object
ENTRY(arm720_processor_functions)
.word v4t_late_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm720_proc_init
.word cpu_arm720_proc_fin
.word cpu_arm720_reset

2
arch/arm/mm/proc-arm740.S
View File

@ -126,7 +126,7 @@ __arm740_setup:
.type arm740_processor_functions, #object
ENTRY(arm740_processor_functions)
.word v4t_late_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm740_proc_init
.word cpu_arm740_proc_fin
.word cpu_arm740_reset

2
arch/arm/mm/proc-arm7tdmi.S
View File

@ -64,7 +64,7 @@ __arm7tdmi_setup:
.type arm7tdmi_processor_functions, #object
ENTRY(arm7tdmi_processor_functions)
.word v4t_late_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm7tdmi_proc_init
.word cpu_arm7tdmi_proc_fin
.word cpu_arm7tdmi_reset

2
arch/arm/mm/proc-arm920.S
View File

@ -395,7 +395,7 @@ arm920_crval:
.type arm920_processor_functions, #object
arm920_processor_functions:
.word v4t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm920_proc_init
.word cpu_arm920_proc_fin
.word cpu_arm920_reset

2
arch/arm/mm/proc-arm922.S
View File

@ -399,7 +399,7 @@ arm922_crval:
.type arm922_processor_functions, #object
arm922_processor_functions:
.word v4t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm922_proc_init
.word cpu_arm922_proc_fin
.word cpu_arm922_reset

2
arch/arm/mm/proc-arm925.S
View File

@ -462,7 +462,7 @@ arm925_crval:
.type arm925_processor_functions, #object
arm925_processor_functions:
.word v4t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm925_proc_init
.word cpu_arm925_proc_fin
.word cpu_arm925_reset

2
arch/arm/mm/proc-arm926.S
View File

@ -415,7 +415,7 @@ arm926_crval:
.type arm926_processor_functions, #object
arm926_processor_functions:
.word v5tj_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm926_proc_init
.word cpu_arm926_proc_fin
.word cpu_arm926_reset

2
arch/arm/mm/proc-arm940.S
View File

@ -322,7 +322,7 @@ __arm940_setup:
.type arm940_processor_functions, #object
ENTRY(arm940_processor_functions)
.word nommu_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm940_proc_init
.word cpu_arm940_proc_fin
.word cpu_arm940_reset

2
arch/arm/mm/proc-arm946.S
View File

@ -377,7 +377,7 @@ __arm946_setup:
.type arm946_processor_functions, #object
ENTRY(arm946_processor_functions)
.word nommu_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm946_proc_init
.word cpu_arm946_proc_fin
.word cpu_arm946_reset

2
arch/arm/mm/proc-arm9tdmi.S
View File

@ -64,7 +64,7 @@ __arm9tdmi_setup:
.type arm9tdmi_processor_functions, #object
ENTRY(arm9tdmi_processor_functions)
.word nommu_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_arm9tdmi_proc_init
.word cpu_arm9tdmi_proc_fin
.word cpu_arm9tdmi_reset

2
arch/arm/mm/proc-fa526.S
View File

@ -191,7 +191,7 @@ fa526_cr1_set:
.type fa526_processor_functions, #object
fa526_processor_functions:
.word v4_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_fa526_proc_init
.word cpu_fa526_proc_fin
.word cpu_fa526_reset

2
arch/arm/mm/proc-feroceon.S
View File

@ -499,7 +499,7 @@ feroceon_crval:
.type feroceon_processor_functions, #object
feroceon_processor_functions:
.word v5t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_feroceon_proc_init
.word cpu_feroceon_proc_fin
.word cpu_feroceon_reset

2
arch/arm/mm/proc-mohawk.S
View File

@ -359,7 +359,7 @@ mohawk_crval:
.type mohawk_processor_functions, #object
mohawk_processor_functions:
.word v5t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_mohawk_proc_init
.word cpu_mohawk_proc_fin
.word cpu_mohawk_reset

2
arch/arm/mm/proc-sa110.S
View File

@ -199,7 +199,7 @@ sa110_crval:
.type sa110_processor_functions, #object
ENTRY(sa110_processor_functions)
.word v4_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_sa110_proc_init
.word cpu_sa110_proc_fin
.word cpu_sa110_reset

2
arch/arm/mm/proc-sa1100.S
View File

@ -214,7 +214,7 @@ sa1100_crval:
.type sa1100_processor_functions, #object
ENTRY(sa1100_processor_functions)
.word v4_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_sa1100_proc_init
.word cpu_sa1100_proc_fin
.word cpu_sa1100_reset

2
arch/arm/mm/proc-v6.S
View File

@ -191,7 +191,7 @@ v6_crval:
.type v6_processor_functions, #object
ENTRY(v6_processor_functions)
.word v6_early_abort
.word pabort_noifar
.word v6_pabort
.word cpu_v6_proc_init
.word cpu_v6_proc_fin
.word cpu_v6_reset

2
arch/arm/mm/proc-v7.S
View File

@ -295,7 +295,7 @@ __v7_setup_stack:
.type v7_processor_functions, #object
ENTRY(v7_processor_functions)
.word v7_early_abort
.word pabort_ifar
.word v7_pabort
.word cpu_v7_proc_init
.word cpu_v7_proc_fin
.word cpu_v7_reset

2
arch/arm/mm/proc-xsc3.S
View File

@ -428,7 +428,7 @@ xsc3_crval:
.type xsc3_processor_functions, #object
ENTRY(xsc3_processor_functions)
.word v5t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_xsc3_proc_init
.word cpu_xsc3_proc_fin
.word cpu_xsc3_reset

2
arch/arm/mm/proc-xscale.S
View File

@ -511,7 +511,7 @@ xscale_crval:
.type xscale_processor_functions, #object
ENTRY(xscale_processor_functions)
.word v5t_early_abort
.word pabort_noifar
.word legacy_pabort
.word cpu_xscale_proc_init
.word cpu_xscale_proc_fin
.word cpu_xscale_reset

3
arch/arm/plat-iop/pci.c
View File

@ -257,7 +257,8 @@ void __init iop3xx_atu_setup(void)
*IOP3XX_OUMWTVR0 = 0;
/* Outbound window 1 */
*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE;
*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
*IOP3XX_OUMWTVR1 = 0;
/* BAR 3 ( Disabled ) */

2
arch/arm/plat-iop/time.c
View File

@ -85,7 +85,7 @@ void __init iop_init_time(unsigned long tick_rate)
{
u32 timer_ctl;
ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
ticks_per_usec = tick_rate / 1000000;
next_jiffy_time = 0xffffffff;
iop_tick_rate = tick_rate;

3
arch/arm/plat-s3c24xx/include/plat/mci.h
View File

@ -2,8 +2,11 @@
#define _ARCH_MCI_H
struct s3c24xx_mci_pdata {
unsigned int no_wprotect : 1;
unsigned int no_detect : 1;
unsigned int wprotect_invert : 1;
unsigned int detect_invert : 1; /* set => detect active high. */
unsigned int use_dma : 1;
unsigned int gpio_detect;
unsigned int gpio_wprotect;

2
arch/blackfin/mach-bf561/coreb.c
View File

@ -48,7 +48,7 @@ coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned l
return ret;
}
static struct file_operations coreb_fops = {
static const struct file_operations coreb_fops = {
.owner = THIS_MODULE,
.ioctl = coreb_ioctl,
};

2
arch/cris/arch-v10/drivers/sync_serial.c
View File

@ -244,7 +244,7 @@ static unsigned sync_serial_prescale_shadow;
#define NUMBER_OF_PORTS 2
static struct file_operations sync_serial_fops = {
static const struct file_operations sync_serial_fops = {
.owner = THIS_MODULE,
.write = sync_serial_write,
.read = sync_serial_read,

2
arch/cris/arch-v32/drivers/mach-fs/gpio.c
View File

@ -855,7 +855,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
return 0;
}
struct file_operations gpio_fops = {
static const struct file_operations gpio_fops = {
.owner = THIS_MODULE,
.poll = gpio_poll,
.ioctl = gpio_ioctl,

7
arch/m32r/include/asm/io.h
View File

@ -162,6 +162,13 @@ static inline void _writel(unsigned long l, unsigned long addr)
#define __raw_writew writew
#define __raw_writel writel
#define ioread8 read
#define ioread16 readw
#define ioread32 readl
#define iowrite8 writeb
#define iowrite16 writew
#define iowrite32 writel
#define mmiowb()
#define flush_write_buffers() do { } while (0) /* M32R_FIXME */

6
arch/m32r/kernel/m32r_ksyms.c
View File

@ -23,12 +23,6 @@ EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(kernel_thread);
/* Networking helper routines. */
/* Delay loops */
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__delay);
EXPORT_SYMBOL(__const_udelay);
EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);

9
arch/m32r/kernel/time.c
View File

@ -33,6 +33,15 @@
#include <asm/hw_irq.h>
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
/* this needs a better home */
DEFINE_SPINLOCK(rtc_lock);
#ifdef CONFIG_RTC_DRV_CMOS_MODULE
EXPORT_SYMBOL(rtc_lock);
#endif
#endif /* pc-style 'CMOS' RTC support */
#ifdef CONFIG_SMP
extern void smp_local_timer_interrupt(void);
#endif

4
arch/m32r/kernel/traps.c
View File

@ -104,8 +104,8 @@ static void set_eit_vector_entries(void)
eit_vector[186] = (unsigned long)smp_call_function_interrupt;
eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt;
eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt;
eit_vector[189] = (unsigned long)smp_call_function_single_interrupt;
eit_vector[190] = 0;
eit_vector[189] = 0; /* CPU_BOOT_IPI */
eit_vector[190] = (unsigned long)smp_call_function_single_interrupt;
eit_vector[191] = 0;
#endif
_flush_cache_copyback_all();

4
arch/m32r/lib/delay.c
View File

@ -122,4 +122,8 @@ void __ndelay(unsigned long nsecs)
{
__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
}
EXPORT_SYMBOL(__delay);
EXPORT_SYMBOL(__const_udelay);
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);

5
arch/m32r/mm/discontig.c
View File

@ -32,6 +32,9 @@ typedef struct {
} mem_prof_t;
static mem_prof_t mem_prof[MAX_NUMNODES];
extern unsigned long memory_start;
extern unsigned long memory_end;
static void __init mem_prof_init(void)
{
unsigned long start_pfn, holes, free_pfn;
@ -42,7 +45,7 @@ static void __init mem_prof_init(void)
/* Node#0 SDRAM */
mp = &mem_prof[0];
mp->start_pfn = PFN_UP(CONFIG_MEMORY_START);
mp->pages = PFN_DOWN(CONFIG_MEMORY_SIZE);
mp->pages = PFN_DOWN(memory_end - memory_start);
mp->holes = 0;
mp->free_pfn = PFN_UP(__pa(_end));

12
arch/m32r/mm/mmu.S
View File

@ -150,9 +150,13 @@ ENTRY(tme_handler)
; pmd = pmd_offset(pgd, address);
ld r3, @r3 ; r3: pmd data
ldi r2, #-4096
beqz r3, 3f ; pmd_none(*pmd) ?
and3 r2, r3, #0xfff
add3 r2, r2, #-355 ; _KERNPG_TABLE(=0x163)
bnez r2, 3f ; pmd_bad(*pmd) ?
ldi r2, #-4096
; pte = pte_offset(pmd, address);
and r2, r3 ; r2: pte base addr
srl3 r3, r0, #10
@ -263,9 +267,9 @@ ENTRY(tme_handler)
ld r1, @r3 ; r1: pmd
beqz r1, 3f ; pmd_none(*pmd) ?
;
and3 r1, r1, #0xeff
ldi r4, #611 ; _KERNPG_TABLE(=611)
bne r1, r4, 3f ; !pmd_bad(*pmd) ?
and3 r1, r1, #0x3ff
ldi r4, #0x163 ; _KERNPG_TABLE(=0x163)
bne r1, r4, 3f ; pmd_bad(*pmd) ?
.fillinsn
4:

12
arch/m68k/include/asm/hardirq_mm.h
View File

@ -1,8 +1,16 @@
#ifndef __M68K_HARDIRQ_H
#define __M68K_HARDIRQ_H
#include <linux/threads.h>
#include <linux/cache.h>
/* entry.S is sensitive to the offsets of these fields */
typedef struct {
unsigned int __softirq_pending;
} ____cacheline_aligned irq_cpustat_t;
#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
#define HARDIRQ_BITS 8
#include <asm-generic/hardirq.h>
#endif

73
arch/mn10300/include/asm/uaccess.h
View File

@ -129,42 +129,47 @@ extern int fixup_exception(struct pt_regs *regs);
struct __large_struct { unsigned long buf[100]; };
#define __m(x) (*(struct __large_struct *)(x))
#define __get_user_nocheck(x, ptr, size) \
({ \
__typeof(*(ptr)) __gu_val; \
unsigned long __gu_addr; \
int __gu_err; \
__gu_addr = (unsigned long) (ptr); \
switch (size) { \
case 1: __get_user_asm("bu"); break; \
case 2: __get_user_asm("hu"); break; \
case 4: __get_user_asm("" ); break; \
default: __get_user_unknown(); break; \
} \
x = (__typeof__(*(ptr))) __gu_val; \
__gu_err; \
#define __get_user_nocheck(x, ptr, size) \
({ \
unsigned long __gu_addr; \
int __gu_err; \
__gu_addr = (unsigned long) (ptr); \
switch (size) { \
case 1: { \
unsigned char __gu_val; \
__get_user_asm("bu"); \
(x) = *(__force __typeof__(*(ptr))*) &__gu_val; \
break; \
} \
case 2: { \
unsigned short __gu_val; \
__get_user_asm("hu"); \
(x) = *(__force __typeof__(*(ptr))*) &__gu_val; \
break; \
} \
case 4: { \
unsigned int __gu_val; \
__get_user_asm(""); \
(x) = *(__force __typeof__(*(ptr))*) &__gu_val; \
break; \
} \
default: \
__get_user_unknown(); \
break; \
} \
__gu_err; \
})
#define __get_user_check(x, ptr, size) \
({ \
__typeof__(*(ptr)) __gu_val; \
unsigned long __gu_addr; \
int __gu_err; \
__gu_addr = (unsigned long) (ptr); \
if (likely(__access_ok(__gu_addr,size))) { \
switch (size) { \
case 1: __get_user_asm("bu"); break; \
case 2: __get_user_asm("hu"); break; \
case 4: __get_user_asm("" ); break; \
default: __get_user_unknown(); break; \
} \
} \
else { \
__gu_err = -EFAULT; \
__gu_val = 0; \
} \
x = (__typeof__(*(ptr))) __gu_val; \
__gu_err; \
#define __get_user_check(x, ptr, size) \
({ \
int _e; \
if (likely(__access_ok((unsigned long) (ptr), (size)))) \
_e = __get_user_nocheck((x), (ptr), (size)); \
else { \
_e = -EFAULT; \
(x) = (__typeof__(x))0; \
} \
_e; \
})
#define __get_user_asm(INSN) \

6
arch/mn10300/unit-asb2303/include/unit/clock.h
View File

@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
extern unsigned long mn10300_iobclk;
extern unsigned long mn10300_tsc_per_HZ;
#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
#define MN10300_IOCLK mn10300_ioclk
/* If this processors has a another clock, uncomment the below. */
/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
/* #define MN10300_IOBCLK mn10300_iobclk */
#else /* !CONFIG_MN10300_RTC */
@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ;
#define MN10300_TSCCLK MN10300_IOCLK
#ifdef CONFIG_MN10300_RTC
#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ
#else /* !CONFIG_MN10300_RTC */
#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
#endif /* !CONFIG_MN10300_RTC */

6
arch/mn10300/unit-asb2305/include/unit/clock.h
View File

@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
extern unsigned long mn10300_iobclk;
extern unsigned long mn10300_tsc_per_HZ;
#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
#define MN10300_IOCLK mn10300_ioclk
/* If this processors has a another clock, uncomment the below. */
/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
/* #define MN10300_IOBCLK mn10300_iobclk */
#else /* !CONFIG_MN10300_RTC */
@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ;
#define MN10300_TSCCLK MN10300_IOCLK
#ifdef CONFIG_MN10300_RTC
#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ
#else /* !CONFIG_MN10300_RTC */
#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
#endif /* !CONFIG_MN10300_RTC */

2
arch/powerpc/kvm/timing.c
View File

@ -201,7 +201,7 @@ static int kvmppc_exit_timing_open(struct inode *inode, struct file *file)
return single_open(file, kvmppc_exit_timing_show, inode->i_private);
}
static struct file_operations kvmppc_exit_timing_fops = {
static const struct file_operations kvmppc_exit_timing_fops = {
.owner = THIS_MODULE,
.open = kvmppc_exit_timing_open,
.read = seq_read,

2
arch/powerpc/platforms/cell/spufs/file.c
View File

@ -147,7 +147,7 @@ static int __fops ## _open(struct inode *inode, struct file *file) \
__simple_attr_check_format(__fmt, 0ull); \
return spufs_attr_open(inode, file, __get, __set, __fmt); \
} \
static struct file_operations __fops = { \
static const struct file_operations __fops = { \
.owner = THIS_MODULE, \
.open = __fops ## _open, \
.release = spufs_attr_release, \

2
arch/powerpc/platforms/pseries/dtl.c
View File

@ -209,7 +209,7 @@ static ssize_t dtl_file_read(struct file *filp, char __user *buf, size_t len,
return n_read * sizeof(struct dtl_entry);
}
static struct file_operations dtl_fops = {
static const struct file_operations dtl_fops = {
.open = dtl_file_open,
.release = dtl_file_release,
.read = dtl_file_read,

3
arch/x86/include/asm/checksum_32.h
View File

@ -161,7 +161,8 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
"adcl $0, %0 ;\n"
: "=&r" (sum)
: "r" (saddr), "r" (daddr),
"r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
"r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
: "memory");
return csum_fold(sum);
}

2
arch/x86/xen/debugfs.c
View File

@ -100,7 +100,7 @@ static int xen_array_release(struct inode *inode, struct file *file)
return 0;
}
static struct file_operations u32_array_fops = {
static const struct file_operations u32_array_fops = {
.owner = THIS_MODULE,
.open = u32_array_open,
.release= xen_array_release,

2
drivers/acpi/video.c
View File

@ -285,7 +285,7 @@ static int acpi_video_device_brightness_open_fs(struct inode *inode,
struct file *file);
static ssize_t acpi_video_device_write_brightness(struct file *file,
const char __user *buffer, size_t count, loff_t *data);
static struct file_operations acpi_video_device_brightness_fops = {
static const struct file_operations acpi_video_device_brightness_fops = {
.owner = THIS_MODULE,
.open = acpi_video_device_brightness_open_fs,
.read = seq_read,

8
drivers/atm/ambassador.c
View File

@ -1306,14 +1306,6 @@ static void amb_close (struct atm_vcc * atm_vcc) {
return;
}
/********** Set socket options for a VC **********/
// int amb_getsockopt (struct atm_vcc * atm_vcc, int level, int optname, void * optval, int optlen);
/********** Set socket options for a VC **********/
// int amb_setsockopt (struct atm_vcc * atm_vcc, int level, int optname, void * optval, int optlen);
/********** Send **********/
static int amb_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) {

2
drivers/atm/eni.c
View File

@ -2031,7 +2031,7 @@ static int eni_getsockopt(struct atm_vcc *vcc,int level,int optname,
static int eni_setsockopt(struct atm_vcc *vcc,int level,int optname,
void __user *optval,int optlen)
void __user *optval,unsigned int optlen)
{
return -EINVAL;
}

2
drivers/atm/firestream.c
View File

@ -1244,7 +1244,7 @@ static int fs_getsockopt(struct atm_vcc *vcc,int level,int optname,
static int fs_setsockopt(struct atm_vcc *vcc,int level,int optname,
void __user *optval,int optlen)
void __user *optval,unsigned int optlen)
{
func_enter ();
func_exit ();

2
drivers/atm/fore200e.c
View File

@ -1795,7 +1795,7 @@ fore200e_getsockopt(struct atm_vcc* vcc, int level, int optname, void __user *op
static int
fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, int optlen)
fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, unsigned int optlen)
{
/* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */

2
drivers/atm/horizon.c
View File

@ -2590,7 +2590,7 @@ static int hrz_getsockopt (struct atm_vcc * atm_vcc, int level, int optname,
}
static int hrz_setsockopt (struct atm_vcc * atm_vcc, int level, int optname,
void *optval, int optlen) {
void *optval, unsigned int optlen) {
hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt");
switch (level) {

2
drivers/atm/iphase.c
View File

@ -2862,7 +2862,7 @@ static int ia_getsockopt(struct atm_vcc *vcc, int level, int optname,
}
static int ia_setsockopt(struct atm_vcc *vcc, int level, int optname,
void __user *optval, int optlen)
void __user *optval, unsigned int optlen)
{
IF_EVENT(printk(">ia_setsockopt\n");)
return -EINVAL;

2
drivers/atm/zatm.c
View File

@ -1517,7 +1517,7 @@ static int zatm_getsockopt(struct atm_vcc *vcc,int level,int optname,
static int zatm_setsockopt(struct atm_vcc *vcc,int level,int optname,
void __user *optval,int optlen)
void __user *optval,unsigned int optlen)
{
return -EINVAL;
}

2
drivers/block/cciss.c
View File

@ -426,7 +426,7 @@ out:
return err;
}
static struct file_operations cciss_proc_fops = {
static const struct file_operations cciss_proc_fops = {
.owner = THIS_MODULE,
.open = cciss_seq_open,
.read = seq_read,

2
drivers/char/apm-emulation.c
View File

@ -393,7 +393,7 @@ static int apm_open(struct inode * inode, struct file * filp)
return as ? 0 : -ENOMEM;
}
static struct file_operations apm_bios_fops = {
static const struct file_operations apm_bios_fops = {
.owner = THIS_MODULE,
.read = apm_read,
.poll = apm_poll,

2
drivers/char/bfin-otp.c
View File

@ -217,7 +217,7 @@ static long bfin_otp_ioctl(struct file *filp, unsigned cmd, unsigned long arg)
# define bfin_otp_ioctl NULL
#endif
static struct file_operations bfin_otp_fops = {
static const struct file_operations bfin_otp_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = bfin_otp_ioctl,
.read = bfin_otp_read,

2
drivers/char/cyclades.c
View File

@ -3354,7 +3354,7 @@ static int __init cy_detect_isa(void)
continue;
}
#ifdef MODULE
if (isparam && irq[i])
if (isparam && i < NR_CARDS && irq[i])
cy_isa_irq = irq[i];
else
#endif

7
drivers/char/serial167.c
View File

@ -220,8 +220,7 @@ static inline int serial_paranoia_check(struct cyclades_port *info, char *name,
return 1;
}
if ((long)info < (long)(&cy_port[0])
|| (long)(&cy_port[NR_PORTS]) < (long)info) {
if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) {
printk("Warning: cyclades_port out of range for (%s) in %s\n",
name, routine);
return 1;
@ -520,15 +519,13 @@ static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id)
panic("TxInt on debug port!!!");
}
#endif
info = &cy_port[channel];
/* validate the port number (as configured and open) */
if ((channel < 0) || (NR_PORTS <= channel)) {
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
base_addr[CyTEOIR] = CyNOTRANS;
return IRQ_HANDLED;
}
info = &cy_port[channel];
info->last_active = jiffies;
if (info->tty == 0) {
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);

7
drivers/char/tty_ldisc.c
View File

@ -518,7 +518,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
static int tty_ldisc_halt(struct tty_struct *tty)
{
clear_bit(TTY_LDISC, &tty->flags);
return cancel_delayed_work(&tty->buf.work);
return cancel_delayed_work_sync(&tty->buf.work);
}
/**
@ -756,12 +756,9 @@ void tty_ldisc_hangup(struct tty_struct *tty)
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
/* Make sure the old ldisc is quiescent */
tty_ldisc_halt(tty);
flush_scheduled_work();
/* Avoid racing set_ldisc or tty_ldisc_release */
mutex_lock(&tty->ldisc_mutex);
tty_ldisc_halt(tty);
if (tty->ldisc) { /* Not yet closed */
/* Switch back to N_TTY */
tty_ldisc_reinit(tty);

6
drivers/char/vt_ioctl.c
View File

@ -981,8 +981,10 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
goto eperm;
if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg,
sizeof(struct vt_setactivate)))
return -EFAULT;
sizeof(struct vt_setactivate))) {
ret = -EFAULT;
goto out;
}
if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
ret = -ENXIO;
else {

2
drivers/char/xilinx_hwicap/xilinx_hwicap.c
View File

@ -559,7 +559,7 @@ static int hwicap_release(struct inode *inode, struct file *file)
return status;
}
static struct file_operations hwicap_fops = {
static const struct file_operations hwicap_fops = {
.owner = THIS_MODULE,
.write = hwicap_write,
.read = hwicap_read,

Some files were not shown because too many files have changed in this diff Show More