dt-bindings: arm: Drop the non-YAML bindings
We created new bindings for the ARM Board using YAML so delete the old human-parseable-only bindings. Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
4fb00d9066
commit
2d483550b6
|
@ -1,237 +0,0 @@
|
|||
ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform)
|
||||
-----------------------------------------------------------------------------
|
||||
ARM's oldest Linux-supported platform with connectors for different core
|
||||
tiles of ARMv4, ARMv5 and ARMv6 type.
|
||||
|
||||
Required properties (in root node):
|
||||
compatible = "arm,integrator-ap"; /* Application Platform */
|
||||
compatible = "arm,integrator-cp"; /* Compact Platform */
|
||||
|
||||
FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
|
||||
|
||||
Required nodes:
|
||||
|
||||
- core-module: the root node to the Integrator platforms must have
|
||||
a core-module with regs and the compatible string
|
||||
"arm,core-module-integrator"
|
||||
- external-bus-interface: the root node to the Integrator platforms
|
||||
must have an external bus interface with regs and the
|
||||
compatible-string "arm,external-bus-interface"
|
||||
|
||||
Required properties for the core module:
|
||||
- regs: the location and size of the core module registers, one
|
||||
range of 0x200 bytes.
|
||||
|
||||
- syscon: the root node of the Integrator platforms must have a
|
||||
system controller node pointing to the control registers,
|
||||
with the compatible string
|
||||
"arm,integrator-ap-syscon"
|
||||
"arm,integrator-cp-syscon"
|
||||
respectively.
|
||||
|
||||
Required properties for the system controller:
|
||||
- regs: the location and size of the system controller registers,
|
||||
one range of 0x100 bytes.
|
||||
|
||||
Required properties for the AP system controller:
|
||||
- interrupts: the AP syscon node must include the logical module
|
||||
interrupts, stated in order of module instance <module 0>,
|
||||
<module 1>, <module 2> ... for the CP system controller this
|
||||
is not required not of any use.
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "integrator.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ARM Integrator/AP";
|
||||
compatible = "arm,integrator-ap";
|
||||
|
||||
core-module@10000000 {
|
||||
compatible = "arm,core-module-integrator";
|
||||
reg = <0x10000000 0x200>;
|
||||
};
|
||||
|
||||
ebi@12000000 {
|
||||
compatible = "arm,external-bus-interface";
|
||||
reg = <0x12000000 0x100>;
|
||||
};
|
||||
|
||||
syscon {
|
||||
compatible = "arm,integrator-ap-syscon";
|
||||
reg = <0x11000000 0x100>;
|
||||
interrupt-parent = <&pic>;
|
||||
/* These are the logic module IRQs */
|
||||
interrupts = <9>, <10>, <11>, <12>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
ARM Versatile Application and Platform Baseboards
|
||||
-------------------------------------------------
|
||||
ARM's development hardware platform with connectors for customizable
|
||||
core tiles. The hardware configuration of the Versatile boards is
|
||||
highly customizable.
|
||||
|
||||
Required properties (in root node):
|
||||
compatible = "arm,versatile-ab"; /* Application baseboard */
|
||||
compatible = "arm,versatile-pb"; /* Platform baseboard */
|
||||
|
||||
Interrupt controllers:
|
||||
- VIC required properties:
|
||||
compatible = "arm,versatile-vic";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
- SIC required properties:
|
||||
compatible = "arm,versatile-sic";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
Required nodes:
|
||||
|
||||
- core-module: the root node to the Versatile platforms must have
|
||||
a core-module with regs and the compatible strings
|
||||
"arm,core-module-versatile", "syscon"
|
||||
|
||||
Optional nodes:
|
||||
|
||||
- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface
|
||||
board mounted, this has a separate system controller that is
|
||||
defined in this node.
|
||||
Required properties:
|
||||
compatible = "arm,versatile-ib2-syscon", "syscon"
|
||||
|
||||
ARM RealView Boards
|
||||
-------------------
|
||||
The RealView boards cover tailored evaluation boards that are used to explore
|
||||
the ARM11 and Cortex A-8 and Cortex A-9 processors.
|
||||
|
||||
Required properties (in root node):
|
||||
/* RealView Emulation Baseboard */
|
||||
compatible = "arm,realview-eb";
|
||||
/* RealView Platform Baseboard for ARM1176JZF-S */
|
||||
compatible = "arm,realview-pb1176";
|
||||
/* RealView Platform Baseboard for ARM11 MPCore */
|
||||
compatible = "arm,realview-pb11mp";
|
||||
/* RealView Platform Baseboard for Cortex A-8 */
|
||||
compatible = "arm,realview-pba8";
|
||||
/* RealView Platform Baseboard Explore for Cortex A-9 */
|
||||
compatible = "arm,realview-pbx";
|
||||
|
||||
Required nodes:
|
||||
|
||||
- soc: some node of the RealView platforms must be the SoC
|
||||
node that contain the SoC-specific devices, with the compatible
|
||||
string set to one of these tuples:
|
||||
"arm,realview-eb-soc", "simple-bus"
|
||||
"arm,realview-pb1176-soc", "simple-bus"
|
||||
"arm,realview-pb11mp-soc", "simple-bus"
|
||||
"arm,realview-pba8-soc", "simple-bus"
|
||||
"arm,realview-pbx-soc", "simple-bus"
|
||||
|
||||
- syscon: some subnode of the RealView SoC node must be a
|
||||
system controller node pointing to the control registers,
|
||||
with the compatible string set to one of these:
|
||||
"arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon"
|
||||
"arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon"
|
||||
"arm,realview-eb-syscon", "syscon"
|
||||
"arm,realview-pb1176-syscon", "syscon"
|
||||
"arm,realview-pb11mp-syscon", "syscon"
|
||||
"arm,realview-pba8-syscon", "syscon"
|
||||
"arm,realview-pbx-syscon", "syscon"
|
||||
|
||||
Required properties for the system controller:
|
||||
- regs: the location and size of the system controller registers,
|
||||
one range of 0x1000 bytes.
|
||||
|
||||
Example:
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "ARM RealView PB1176 with device tree";
|
||||
compatible = "arm,realview-pb1176";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "arm,realview-pb1176-soc", "simple-bus";
|
||||
ranges;
|
||||
|
||||
syscon: syscon@10000000 {
|
||||
compatible = "arm,realview-syscon", "syscon";
|
||||
reg = <0x10000000 0x1000>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
ARM Versatile Express Boards
|
||||
-----------------------------
|
||||
For details on the device tree bindings for ARM Versatile Express boards
|
||||
please consult the vexpress.txt file in the same directory as this file.
|
||||
|
||||
ARM Juno Boards
|
||||
----------------
|
||||
The Juno boards are targeting development for AArch64 systems. The first
|
||||
iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
|
||||
with the second iteration, Juno r1, mainly aimed at development of PCIe
|
||||
based systems. Juno r1 also has support for AXI masters placed on the TLX
|
||||
connectors to join the coherency domain.
|
||||
|
||||
Juno boards are described in a similar way to ARM Versatile Express boards,
|
||||
with the motherboard part of the hardware being described in a separate file
|
||||
to highlight the fact that is part of the support infrastructure for the SoC.
|
||||
Juno device tree bindings also share the Versatile Express bindings as
|
||||
described under the RS1 memory mapping.
|
||||
|
||||
Required properties (in root node):
|
||||
compatible = "arm,juno"; /* For Juno r0 board */
|
||||
compatible = "arm,juno-r1"; /* For Juno r1 board */
|
||||
compatible = "arm,juno-r2"; /* For Juno r2 board */
|
||||
|
||||
Required nodes:
|
||||
The description for the board must include:
|
||||
- a "psci" node describing the boot method used for the secondary CPUs.
|
||||
A detailed description of the bindings used for "psci" nodes is present
|
||||
in the psci.yaml file.
|
||||
- a "cpus" node describing the available cores and their associated
|
||||
"enable-method"s. For more details see cpus.yaml file.
|
||||
|
||||
Example:
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
model = "ARM Juno development board (r0)";
|
||||
compatible = "arm,juno", "arm,vexpress";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
A57_0: cpu@0 {
|
||||
compatible = "arm,cortex-a57";
|
||||
reg = <0x0 0x0>;
|
||||
device_type = "cpu";
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
.....
|
||||
|
||||
A53_0: cpu@100 {
|
||||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x100>;
|
||||
device_type = "cpu";
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
.....
|
||||
};
|
||||
|
||||
};
|
|
@ -1,229 +0,0 @@
|
|||
ARM Versatile Express boards family
|
||||
-----------------------------------
|
||||
|
||||
ARM's Versatile Express platform consists of a motherboard and one
|
||||
or more daughterboards (tiles). The motherboard provides a set of
|
||||
peripherals. Processor and RAM "live" on the tiles.
|
||||
|
||||
The motherboard and each core tile should be described by a separate
|
||||
Device Tree source file, with the tile's description including
|
||||
the motherboard file using a /include/ directive. As the motherboard
|
||||
can be initialized in one of two different configurations ("memory
|
||||
maps"), care must be taken to include the correct one.
|
||||
|
||||
|
||||
Root node
|
||||
---------
|
||||
|
||||
Required properties in the root node:
|
||||
- compatible value:
|
||||
compatible = "arm,vexpress,<model>", "arm,vexpress";
|
||||
where <model> is the full tile model name (as used in the tile's
|
||||
Technical Reference Manual), eg.:
|
||||
- for Coretile Express A5x2 (V2P-CA5s):
|
||||
compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
|
||||
- for Coretile Express A9x4 (V2P-CA9):
|
||||
compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
|
||||
If a tile comes in several variants or can be used in more then one
|
||||
configuration, the compatible value should be:
|
||||
compatible = "arm,vexpress,<model>,<variant>", \
|
||||
"arm,vexpress,<model>", "arm,vexpress";
|
||||
eg:
|
||||
- Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
|
||||
compatible = "arm,vexpress,v2p-ca15,tc1", \
|
||||
"arm,vexpress,v2p-ca15", "arm,vexpress";
|
||||
- LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
|
||||
compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
|
||||
"arm,vexpress,v2f-2xv6", "arm,vexpress";
|
||||
|
||||
Optional properties in the root node:
|
||||
- tile model name (use name from the tile's Technical Reference
|
||||
Manual, eg. "V2P-CA5s")
|
||||
model = "<model>";
|
||||
- tile's HBI number (unique ARM's board model ID, visible on the
|
||||
PCB's silkscreen) in hexadecimal transcription:
|
||||
arm,hbi = <0xhbi>
|
||||
eg:
|
||||
- for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
|
||||
arm,hbi = <0x191>;
|
||||
- Coretile Express A9x4 (V2P-CA9) HBI-0225:
|
||||
arm,hbi = <0x225>;
|
||||
|
||||
|
||||
CPU nodes
|
||||
---------
|
||||
|
||||
Top-level standard "cpus" node is required. It must contain a node
|
||||
with device_type = "cpu" property for every available core, eg.:
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a5";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
Configuration infrastructure
|
||||
----------------------------
|
||||
|
||||
The platform has an elaborated configuration system, consisting of
|
||||
microcontrollers residing on the mother- and daughterboards known
|
||||
as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
|
||||
The controllers are responsible for the platform initialization
|
||||
(reset generation, flash programming, FPGA bitfiles loading etc.)
|
||||
but also control clock generators, voltage regulators, gather
|
||||
environmental data like temperature, power consumption etc. Even
|
||||
the video output switch (FPGA) is controlled that way.
|
||||
|
||||
The controllers are not mapped into normal memory address space
|
||||
and must be accessed through bridges - other devices capable
|
||||
of generating transactions on the configuration bus.
|
||||
|
||||
The nodes describing configuration controllers must define
|
||||
the following properties:
|
||||
- compatible value:
|
||||
compatible = "arm,vexpress,config-bus";
|
||||
- bridge phandle:
|
||||
arm,vexpress,config-bridge = <phandle>;
|
||||
and children describing available functions.
|
||||
|
||||
|
||||
Platform topology
|
||||
-----------------
|
||||
|
||||
As Versatile Express can be configured in number of physically
|
||||
different setups, the device tree should describe platform topology.
|
||||
Root node and main motherboard node must define the following
|
||||
property, describing physical location of the children nodes:
|
||||
- site number:
|
||||
arm,vexpress,site = <number>;
|
||||
where 0 means motherboard, 1 or 2 are daugtherboard sites,
|
||||
0xf means "master" site (site containing main CPU tile)
|
||||
- when daughterboards are stacked on one site, their position
|
||||
in the stack be be described with:
|
||||
arm,vexpress,position = <number>;
|
||||
- when describing tiles consisting more than one DCC, its number
|
||||
can be described with:
|
||||
arm,vexpress,dcc = <number>;
|
||||
|
||||
Any of the numbers above defaults to zero if not defined in
|
||||
the node or any of its parent.
|
||||
|
||||
|
||||
Motherboard
|
||||
-----------
|
||||
|
||||
The motherboard description file provides a single "motherboard" node
|
||||
using 2 address cells corresponding to the Static Memory Bus used
|
||||
between the motherboard and the tile. The first cell defines the Chip
|
||||
Select (CS) line number, the second cell address offset within the CS.
|
||||
All interrupt lines between the motherboard and the tile are active
|
||||
high and are described using single cell.
|
||||
|
||||
Optional properties of the "motherboard" node:
|
||||
- motherboard's memory map variant:
|
||||
arm,v2m-memory-map = "<name>";
|
||||
where name is one of:
|
||||
- "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
|
||||
referred to as "ARM Cortex-A Series memory map":
|
||||
arm,v2m-memory-map = "rs1";
|
||||
When this property is missing, the motherboard is using the original
|
||||
memory map (also known as the "Legacy memory map", primarily used
|
||||
with the original CoreTile Express A9x4) with peripherals on CS7.
|
||||
|
||||
Motherboard .dtsi files provide a set of labelled peripherals that
|
||||
can be used to obtain required phandle in the tile's "aliases" node:
|
||||
- UARTs, note that the numbers correspond to the physical connectors
|
||||
on the motherboard's back panel:
|
||||
v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
|
||||
- I2C controllers:
|
||||
v2m_i2c_dvi and v2m_i2c_pcie
|
||||
- SP804 timers:
|
||||
v2m_timer01 and v2m_timer23
|
||||
|
||||
The tile description should define a "smb" node, describing the
|
||||
Static Memory Bus between the tile and motherboard. It must define
|
||||
the following properties:
|
||||
- "simple-bus" compatible value (to ensure creation of the children)
|
||||
compatible = "simple-bus";
|
||||
- mapping of the SMB CS/offset addresses into main address space:
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
ranges = <...>;
|
||||
- interrupts mapping:
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 63>;
|
||||
interrupt-map = <...>;
|
||||
|
||||
|
||||
Example of a VE tile description (simplified)
|
||||
---------------------------------------------
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
model = "V2P-CA5s";
|
||||
arm,hbi = <0x225>;
|
||||
arm,vexpress,site = <0xf>;
|
||||
compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
chosen { };
|
||||
|
||||
aliases {
|
||||
serial0 = &v2m_serial0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a5";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@2c001000 {
|
||||
compatible = "arm,cortex-a9-gic";
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
interrupt-controller;
|
||||
reg = <0x2c001000 0x1000>,
|
||||
<0x2c000100 0x100>;
|
||||
};
|
||||
|
||||
dcc {
|
||||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
osc@0 {
|
||||
compatible = "arm,vexpress-osc";
|
||||
};
|
||||
};
|
||||
|
||||
smb {
|
||||
compatible = "simple-bus";
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
/* CS0 is visible at 0x08000000 */
|
||||
ranges = <0 0 0x08000000 0x04000000>;
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 63>;
|
||||
/* Active high IRQ 0 is connected to GIC's SPI0 */
|
||||
interrupt-map = <0 0 0 &gic 0 0 4>;
|
||||
|
||||
/include/ "vexpress-v2m-rs1.dtsi"
|
||||
};
|
||||
};
|
||||
|
Loading…
Reference in a new issue