arm: Remove plat-tcc directory
The Telechips ARM architecture is being removed. This patch deletes the arch/arm/plat-tcc/ folder. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Harry Sievers <hsievers@csselectronic.com> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
This commit is contained in:
Hans J. Koch
parent
00d79e9d0e
commit
2e3d256de9
|
|
@ -1,20 +0,0 @@
|
|||
if ARCH_TCC_926
|
||||
|
||||
menu "Telechips ARM926-based CPUs"
|
||||
|
||||
choice
|
||||
prompt "Telechips CPU type:"
|
||||
default ARCH_TCC8K
|
||||
|
||||
config ARCH_TCC8K
|
||||
bool TCC8000
|
||||
select USB_ARCH_HAS_OHCI
|
||||
help
|
||||
Support for Telechips TCC8000 systems
|
||||
|
||||
endchoice
|
||||
|
||||
source "arch/arm/mach-tcc8k/Kconfig"
|
||||
|
||||
endmenu
|
||||
endif
|
||||
|
|
@ -1,3 +0,0 @@
|
|||
# "Telechips Platform Common Modules"
|
||||
|
||||
obj-y := clock.o system.o
|
||||
|
|
@ -1,179 +0,0 @@
|
|||
/*
|
||||
* Clock framework for Telechips SoCs
|
||||
* Based on arch/arm/plat-mxc/clock.c
|
||||
*
|
||||
* Copyright (C) 2004 - 2005 Nokia corporation
|
||||
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
|
||||
* Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
|
||||
* Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
|
||||
* Copyright 2010 Hans J. Koch, hjk@linutronix.de
|
||||
*
|
||||
* Licensed under the terms of the GPL v2.
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/string.h>
|
||||
|
||||
#include <mach/clock.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
static DEFINE_MUTEX(clocks_mutex);
|
||||
|
||||
/*-------------------------------------------------------------------------
|
||||
* Standard clock functions defined in include/linux/clk.h
|
||||
*-------------------------------------------------------------------------*/
|
||||
|
||||
static void __clk_disable(struct clk *clk)
|
||||
{
|
||||
BUG_ON(clk->refcount == 0);
|
||||
|
||||
if (!(--clk->refcount) && clk->disable) {
|
||||
/* Unconditionally disable the clock in hardware */
|
||||
clk->disable(clk);
|
||||
/* recursively disable parents */
|
||||
if (clk->parent)
|
||||
__clk_disable(clk->parent);
|
||||
}
|
||||
}
|
||||
|
||||
static int __clk_enable(struct clk *clk)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
if (clk->refcount++ == 0 && clk->enable) {
|
||||
if (clk->parent)
|
||||
ret = __clk_enable(clk->parent);
|
||||
if (ret)
|
||||
return ret;
|
||||
else
|
||||
return clk->enable(clk);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* This function increments the reference count on the clock and enables the
|
||||
* clock if not already enabled. The parent clock tree is recursively enabled
|
||||
*/
|
||||
int clk_enable(struct clk *clk)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
if (!clk)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&clocks_mutex);
|
||||
ret = __clk_enable(clk);
|
||||
mutex_unlock(&clocks_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(clk_enable);
|
||||
|
||||
/* This function decrements the reference count on the clock and disables
|
||||
* the clock when reference count is 0. The parent clock tree is
|
||||
* recursively disabled
|
||||
*/
|
||||
void clk_disable(struct clk *clk)
|
||||
{
|
||||
if (!clk)
|
||||
return;
|
||||
|
||||
mutex_lock(&clocks_mutex);
|
||||
__clk_disable(clk);
|
||||
mutex_unlock(&clocks_mutex);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(clk_disable);
|
||||
|
||||
/* Retrieve the *current* clock rate. If the clock itself
|
||||
* does not provide a special calculation routine, ask
|
||||
* its parent and so on, until one is able to return
|
||||
* a valid clock rate
|
||||
*/
|
||||
unsigned long clk_get_rate(struct clk *clk)
|
||||
{
|
||||
if (!clk)
|
||||
return 0UL;
|
||||
|
||||
if (clk->get_rate)
|
||||
return clk->get_rate(clk);
|
||||
|
||||
return clk_get_rate(clk->parent);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(clk_get_rate);
|
||||
|
||||
/* Round the requested clock rate to the nearest supported
|
||||
* rate that is less than or equal to the requested rate.
|
||||
* This is dependent on the clock's current parent.
|
||||
*/
|
||||
long clk_round_rate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
if (!clk)
|
||||
return 0;
|
||||
if (!clk->round_rate)
|
||||
return 0;
|
||||
|
||||
return clk->round_rate(clk, rate);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(clk_round_rate);
|
||||
|
||||
/* Set the clock to the requested clock rate. The rate must
|
||||
* match a supported rate exactly based on what clk_round_rate returns
|
||||
*/
|
||||
int clk_set_rate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
int ret = -EINVAL;
|
||||
|
||||
if (!clk)
|
||||
return ret;
|
||||
if (!clk->set_rate || !rate)
|
||||
return ret;
|
||||
|
||||
mutex_lock(&clocks_mutex);
|
||||
ret = clk->set_rate(clk, rate);
|
||||
mutex_unlock(&clocks_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(clk_set_rate);
|
||||
|
||||
/* Set the clock's parent to another clock source */
|
||||
int clk_set_parent(struct clk *clk, struct clk *parent)
|
||||
{
|
||||
struct clk *old;
|
||||
int ret = -EINVAL;
|
||||
|
||||
if (!clk)
|
||||
return ret;
|
||||
if (!clk->set_parent || !parent)
|
||||
return ret;
|
||||
|
||||
mutex_lock(&clocks_mutex);
|
||||
old = clk->parent;
|
||||
if (clk->refcount)
|
||||
__clk_enable(parent);
|
||||
ret = clk->set_parent(clk, parent);
|
||||
if (ret)
|
||||
old = parent;
|
||||
if (clk->refcount)
|
||||
__clk_disable(old);
|
||||
mutex_unlock(&clocks_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(clk_set_parent);
|
||||
|
||||
/* Retrieve the clock's parent clock source */
|
||||
struct clk *clk_get_parent(struct clk *clk)
|
||||
{
|
||||
if (!clk)
|
||||
return NULL;
|
||||
|
||||
return clk->parent;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(clk_get_parent);
|
||||
|
|
@ -1,48 +0,0 @@
|
|||
/*
|
||||
* Low level clock header file for Telechips TCC architecture
|
||||
* (C) 2010 Hans J. Koch <hjk@linutronix.de>
|
||||
*
|
||||
* Licensed under the GPL v2.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_TCC_CLOCK_H__
|
||||
#define __ASM_ARCH_TCC_CLOCK_H__
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
struct clk {
|
||||
struct clk *parent;
|
||||
/* id number of a root clock, 0 for normal clocks */
|
||||
int root_id;
|
||||
/* Reference count of clock enable/disable */
|
||||
int refcount;
|
||||
/* Address of associated BCLKCTRx register. Must be set. */
|
||||
void __iomem *bclkctr;
|
||||
/* Bit position for BCLKCTRx. Must be set. */
|
||||
int bclk_shift;
|
||||
/* Address of ACLKxxx register, if any. */
|
||||
void __iomem *aclkreg;
|
||||
/* get the current clock rate (always a fresh value) */
|
||||
unsigned long (*get_rate) (struct clk *);
|
||||
/* Function ptr to set the clock to a new rate. The rate must match a
|
||||
supported rate returned from round_rate. Leave blank if clock is not
|
||||
programmable */
|
||||
int (*set_rate) (struct clk *, unsigned long);
|
||||
/* Function ptr to round the requested clock rate to the nearest
|
||||
supported rate that is less than or equal to the requested rate. */
|
||||
unsigned long (*round_rate) (struct clk *, unsigned long);
|
||||
/* Function ptr to enable the clock. Leave blank if clock can not
|
||||
be gated. */
|
||||
int (*enable) (struct clk *);
|
||||
/* Function ptr to disable the clock. Leave blank if clock can not
|
||||
be gated. */
|
||||
void (*disable) (struct clk *);
|
||||
/* Function ptr to set the parent clock of the clock. */
|
||||
int (*set_parent) (struct clk *, struct clk *);
|
||||
};
|
||||
|
||||
int clk_register(struct clk *clk);
|
||||
void clk_unregister(struct clk *clk);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
|
||||
|
|
@ -1,32 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 1994-1999 Russell King
|
||||
* Copyright (C) 2008-2009 Telechips
|
||||
* Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
.macro addruart, rp, rv, tmp
|
||||
moveq \rp, #0x90000000 @ physical base address
|
||||
movne \rv, #0xF1000000 @ virtual base
|
||||
orr \rp, \rp, #0x00007000 @ UART0
|
||||
orr \rv, \rv, #0x00007000 @ UART0
|
||||
.endm
|
||||
|
||||
.macro senduart,rd,rx
|
||||
strb \rd, [\rx, #0x44]
|
||||
.endm
|
||||
|
||||
.macro waituart,rd,rx
|
||||
.endm
|
||||
|
||||
.macro busyuart,rd,rx
|
||||
1001:
|
||||
ldr \rd, [\rx, #0x14]
|
||||
tst \rd, #0x20
|
||||
|
||||
beq 1001b
|
||||
.endm
|
||||
|
|
@ -1,68 +0,0 @@
|
|||
/*
|
||||
* include/asm-arm/arch-tcc83x/entry-macro.S
|
||||
*
|
||||
* Author : <linux@telechips.com>
|
||||
* Created: June 10, 2008
|
||||
* Description: Low-level IRQ helper macros for Telechips-based platforms
|
||||
*
|
||||
* Copyright (C) 2008-2009 Telechips
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/irqs.h>
|
||||
|
||||
.macro disable_fiq
|
||||
.endm
|
||||
|
||||
.macro get_irqnr_preamble, base, tmp
|
||||
.endm
|
||||
|
||||
.macro arch_ret_to_user, tmp1, tmp2
|
||||
.endm
|
||||
|
||||
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
|
||||
|
||||
ldr \base, =0xF2003000 @ base address of PIC registers
|
||||
|
||||
@@ read MREQ register of PIC0
|
||||
|
||||
mov \irqnr, #0
|
||||
ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts
|
||||
cmp \irqstat, #0
|
||||
bne 1001f
|
||||
|
||||
@@ read MREQ register of PIC1
|
||||
|
||||
ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts
|
||||
cmp \irqstat, #0
|
||||
beq 1002f
|
||||
mov \irqnr, #0x20
|
||||
|
||||
1001:
|
||||
movs \tmp, \irqstat, lsl #16
|
||||
movne \irqstat, \tmp
|
||||
addeq \irqnr, \irqnr, #16
|
||||
|
||||
movs \tmp, \irqstat, lsl #8
|
||||
movne \irqstat, \tmp
|
||||
addeq \irqnr, \irqnr, #8
|
||||
|
||||
movs \tmp, \irqstat, lsl #4
|
||||
movne \irqstat, \tmp
|
||||
addeq \irqnr, \irqnr, #4
|
||||
|
||||
movs \tmp, \irqstat, lsl #2
|
||||
movne \irqstat, \tmp
|
||||
addeq \irqnr, \irqnr, #2
|
||||
|
||||
movs \tmp, \irqstat, lsl #1
|
||||
addeq \irqnr, \irqnr, #1
|
||||
orrs \base, \base, #1
|
||||
1002:
|
||||
@@ exit here, Z flag unset if IRQ
|
||||
|
||||
.endm
|
||||
|
|
@ -1,43 +0,0 @@
|
|||
/*
|
||||
* Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
|
||||
* Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
|
||||
* and Dirk Behme <dirk.behme@de.bosch.com>
|
||||
* Rewritten by: <linux@telechips.com>
|
||||
* Description: Hardware definitions for TCC8300 processors and boards
|
||||
*
|
||||
* Copyright (C) 2001 RidgeRun, Inc.
|
||||
* Copyright (C) 2008-2009 Telechips
|
||||
*
|
||||
* Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
|
||||
*
|
||||
* Licensed under the terms of the GNU Pulic License version 2.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_TCC_HARDWARE_H
|
||||
#define __ASM_ARCH_TCC_HARDWARE_H
|
||||
|
||||
#include <asm/sizes.h>
|
||||
#ifndef __ASSEMBLER__
|
||||
#include <asm/types.h>
|
||||
#endif
|
||||
#include <mach/io.h>
|
||||
|
||||
/*
|
||||
* ----------------------------------------------------------------------------
|
||||
* Clocks
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CLKGEN_REG_BASE 0xfffece00
|
||||
#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
|
||||
#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
|
||||
#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
|
||||
#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
|
||||
#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
|
||||
#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
|
||||
#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
|
||||
#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
|
||||
|
||||
/* DPLL control registers */
|
||||
#define DPLL_CTL 0xfffecf00
|
||||
|
||||
#endif /* __ASM_ARCH_TCC_HARDWARE_H */
|
||||
|
|
@ -1,23 +0,0 @@
|
|||
/*
|
||||
* IO definitions for TCC8000 processors and boards
|
||||
*
|
||||
* Copyright (C) 1997-1999 Russell King
|
||||
* Copyright (C) 2008-2009 Telechips
|
||||
* Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
|
||||
*
|
||||
* Licensed under the terms of the GNU Public License version 2.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARM_ARCH_IO_H
|
||||
#define __ASM_ARM_ARCH_IO_H
|
||||
|
||||
#define IO_SPACE_LIMIT 0xffffffff
|
||||
|
||||
/*
|
||||
* We don't actually have real ISA nor PCI buses, but there is so many
|
||||
* drivers out there that might just work if we fake them...
|
||||
*/
|
||||
#define __io(a) __typesafe_io(a)
|
||||
#define __mem_pci(a) (a)
|
||||
|
||||
#endif
|
||||
|
|
@ -1,83 +0,0 @@
|
|||
/*
|
||||
* IRQ definitions for TCC8xxx
|
||||
*
|
||||
* Copyright (C) 2008-2009 Telechips
|
||||
* Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
|
||||
*
|
||||
* Licensed under the terms of the GPL v2.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_TCC_IRQS_H
|
||||
#define __ASM_ARCH_TCC_IRQS_H
|
||||
|
||||
#define NR_IRQS 64
|
||||
|
||||
/* PIC0 interrupts */
|
||||
#define INT_ADMA1 0
|
||||
#define INT_BDMA 1
|
||||
#define INT_ADMA0 2
|
||||
#define INT_GDMA1 3
|
||||
#define INT_I2S0RX 4
|
||||
#define INT_I2S0TX 5
|
||||
#define INT_TC 6
|
||||
#define INT_UART0 7
|
||||
#define INT_USBD 8
|
||||
#define INT_SPI0TX 9
|
||||
#define INT_UDMA 10
|
||||
#define INT_LIRQ 11
|
||||
#define INT_GDMA2 12
|
||||
#define INT_GDMA0 13
|
||||
#define INT_TC32 14
|
||||
#define INT_LCD 15
|
||||
#define INT_ADC 16
|
||||
#define INT_I2C 17
|
||||
#define INT_RTCP 18
|
||||
#define INT_RTCA 19
|
||||
#define INT_NFC 20
|
||||
#define INT_SD0 21
|
||||
#define INT_GSB0 22
|
||||
#define INT_PK 23
|
||||
#define INT_USBH0 24
|
||||
#define INT_USBH1 25
|
||||
#define INT_G2D 26
|
||||
#define INT_ECC 27
|
||||
#define INT_SPI0RX 28
|
||||
#define INT_UART1 29
|
||||
#define INT_MSCL 30
|
||||
#define INT_GSB1 31
|
||||
/* PIC1 interrupts */
|
||||
#define INT_E0 32
|
||||
#define INT_E1 33
|
||||
#define INT_E2 34
|
||||
#define INT_E3 35
|
||||
#define INT_E4 36
|
||||
#define INT_E5 37
|
||||
#define INT_E6 38
|
||||
#define INT_E7 39
|
||||
#define INT_UART2 40
|
||||
#define INT_UART3 41
|
||||
#define INT_SPI1TX 42
|
||||
#define INT_SPI1RX 43
|
||||
#define INT_GSB2 44
|
||||
#define INT_SPDIF 45
|
||||
#define INT_CDIF 46
|
||||
#define INT_VBON 47
|
||||
#define INT_VBOFF 48
|
||||
#define INT_SD1 49
|
||||
#define INT_UART4 50
|
||||
#define INT_GDMA3 51
|
||||
#define INT_I2S1RX 52
|
||||
#define INT_I2S1TX 53
|
||||
#define INT_CAN0 54
|
||||
#define INT_CAN1 55
|
||||
#define INT_GSB3 56
|
||||
#define INT_KRST 57
|
||||
#define INT_UNUSED 58
|
||||
#define INT_SD0D3 59
|
||||
#define INT_SD1D3 60
|
||||
#define INT_GPS0 61
|
||||
#define INT_GPS1 62
|
||||
#define INT_GPS2 63
|
||||
|
||||
#endif /* ASM_ARCH_TCC_IRQS_H */
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
/*
|
||||
* Author: <linux@telechips.com>
|
||||
* Created: June 10, 2008
|
||||
* Description: LINUX SYSTEM FUNCTIONS for TCC83x
|
||||
*
|
||||
* Copyright (C) 2008-2009 Telechips
|
||||
*
|
||||
* Licensed under the terms of the GPL v2.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_SYSTEM_H
|
||||
#define __ASM_ARCH_SYSTEM_H
|
||||
#include <linux/clk.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
extern void plat_tcc_reboot(void);
|
||||
|
||||
static inline void arch_idle(void)
|
||||
{
|
||||
cpu_do_idle();
|
||||
}
|
||||
|
||||
static inline void arch_reset(char mode, const char *cmd)
|
||||
{
|
||||
plat_tcc_reboot();
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -1,807 +0,0 @@
|
|||
/*
|
||||
* Telechips TCC8000 register definitions
|
||||
*
|
||||
* (C) 2009 Hans J. Koch <hjk@linutronix.de>
|
||||
*
|
||||
* Licensed under the terms of the GPLv2.
|
||||
*/
|
||||
|
||||
#ifndef TCC8K_REGS_H
|
||||
#define TCC8K_REGS_H
|
||||
|
||||
#include <linux/types.h>
|
||||
|
||||
#define EXT_SDRAM_BASE 0x20000000
|
||||
#define INT_SRAM_BASE 0x30000000
|
||||
#define INT_SRAM_SIZE SZ_32K
|
||||
#define CS0_BASE 0x40000000
|
||||
#define CS1_BASE 0x50000000
|
||||
#define CS1_SIZE SZ_64K
|
||||
#define CS2_BASE 0x60000000
|
||||
#define CS3_BASE 0x70000000
|
||||
#define AHB_PERI_BASE 0x80000000
|
||||
#define AHB_PERI_SIZE SZ_64K
|
||||
#define APB0_PERI_BASE 0x90000000
|
||||
#define APB0_PERI_SIZE SZ_128K
|
||||
#define APB1_PERI_BASE 0x98000000
|
||||
#define APB1_PERI_SIZE SZ_128K
|
||||
#define DATA_TCM_BASE 0xa0000000
|
||||
#define DATA_TCM_SIZE SZ_8K
|
||||
#define EXT_MEM_CTRL_BASE 0xf0000000
|
||||
#define EXT_MEM_CTRL_SIZE SZ_4K
|
||||
|
||||
#define CS1_BASE_VIRT (void __iomem *)0xf7000000
|
||||
#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000
|
||||
#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000
|
||||
#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000
|
||||
#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000
|
||||
#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000
|
||||
#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000
|
||||
|
||||
#define __REG(x) (*((volatile u32 *)(x)))
|
||||
|
||||
/* USB Device Controller Registers */
|
||||
#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000)
|
||||
#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000)
|
||||
|
||||
#define UDC_IR_OFFS 0x00
|
||||
#define UDC_EIR_OFFS 0x04
|
||||
#define UDC_EIER_OFFS 0x08
|
||||
#define UDC_FAR_OFFS 0x0c
|
||||
#define UDC_FNR_OFFS 0x10
|
||||
#define UDC_EDR_OFFS 0x14
|
||||
#define UDC_RT_OFFS 0x18
|
||||
#define UDC_SSR_OFFS 0x1c
|
||||
#define UDC_SCR_OFFS 0x20
|
||||
#define UDC_EP0SR_OFFS 0x24
|
||||
#define UDC_EP0CR_OFFS 0x28
|
||||
|
||||
#define UDC_ESR_OFFS 0x2c
|
||||
#define UDC_ECR_OFFS 0x30
|
||||
#define UDC_BRCR_OFFS 0x34
|
||||
#define UDC_BWCR_OFFS 0x38
|
||||
#define UDC_MPR_OFFS 0x3c
|
||||
#define UDC_DCR_OFFS 0x40
|
||||
#define UDC_DTCR_OFFS 0x44
|
||||
#define UDC_DFCR_OFFS 0x48
|
||||
#define UDC_DTTCR1_OFFS 0x4c
|
||||
#define UDC_DTTCR2_OFFS 0x50
|
||||
#define UDC_ESR2_OFFS 0x54
|
||||
|
||||
#define UDC_SCR2_OFFS 0x58
|
||||
#define UDC_EP0BUF_OFFS 0x60
|
||||
#define UDC_EP1BUF_OFFS 0x64
|
||||
#define UDC_EP2BUF_OFFS 0x68
|
||||
#define UDC_EP3BUF_OFFS 0x6c
|
||||
#define UDC_PLICR_OFFS 0xa0
|
||||
#define UDC_PCR_OFFS 0xa4
|
||||
|
||||
#define UDC_UPCR0_OFFS 0xc8
|
||||
#define UDC_UPCR1_OFFS 0xcc
|
||||
#define UDC_UPCR2_OFFS 0xd0
|
||||
#define UDC_UPCR3_OFFS 0xd4
|
||||
|
||||
/* Bits in UDC_EIR */
|
||||
#define UDC_EIR_EP0I (1 << 0)
|
||||
#define UDC_EIR_EP1I (1 << 1)
|
||||
#define UDC_EIR_EP2I (1 << 2)
|
||||
#define UDC_EIR_EP3I (1 << 3)
|
||||
#define UDC_EIR_EPI_MASK 0x0f
|
||||
|
||||
/* Bits in UDC_EIER */
|
||||
#define UDC_EIER_EP0IE (1 << 0)
|
||||
#define UDC_EIER_EP1IE (1 << 1)
|
||||
#define UDC_EIER_EP2IE (1 << 2)
|
||||
#define UDC_EIER_EP3IE (1 << 3)
|
||||
|
||||
/* Bits in UDC_FNR */
|
||||
#define UDC_FNR_FN_MASK 0x7ff
|
||||
#define UDC_FNR_SM (1 << 13)
|
||||
#define UDC_FNR_FTL (1 << 14)
|
||||
|
||||
/* Bits in UDC_SSR */
|
||||
#define UDC_SSR_HFRES (1 << 0)
|
||||
#define UDC_SSR_HFSUSP (1 << 1)
|
||||
#define UDC_SSR_HFRM (1 << 2)
|
||||
#define UDC_SSR_SDE (1 << 3)
|
||||
#define UDC_SSR_HSP (1 << 4)
|
||||
#define UDC_SSR_DM (1 << 5)
|
||||
#define UDC_SSR_DP (1 << 6)
|
||||
#define UDC_SSR_TBM (1 << 7)
|
||||
#define UDC_SSR_VBON (1 << 8)
|
||||
#define UDC_SSR_VBOFF (1 << 9)
|
||||
#define UDC_SSR_EOERR (1 << 10)
|
||||
#define UDC_SSR_DCERR (1 << 11)
|
||||
#define UDC_SSR_TCERR (1 << 12)
|
||||
#define UDC_SSR_BSERR (1 << 13)
|
||||
#define UDC_SSR_TMERR (1 << 14)
|
||||
#define UDC_SSR_BAERR (1 << 15)
|
||||
|
||||
/* Bits in UDC_SCR */
|
||||
#define UDC_SCR_HRESE (1 << 0)
|
||||
#define UDC_SCR_HSSPE (1 << 1)
|
||||
#define UDC_SCR_RRDE (1 << 5)
|
||||
#define UDC_SCR_SPDEN (1 << 6)
|
||||
#define UDC_SCR_DIEN (1 << 12)
|
||||
|
||||
/* Bits in UDC_EP0SR */
|
||||
#define UDC_EP0SR_RSR (1 << 0)
|
||||
#define UDC_EP0SR_TST (1 << 1)
|
||||
#define UDC_EP0SR_SHT (1 << 4)
|
||||
#define UDC_EP0SR_LWO (1 << 6)
|
||||
|
||||
/* Bits in UDC_EP0CR */
|
||||
#define UDC_EP0CR_ESS (1 << 1)
|
||||
|
||||
/* Bits in UDC_ESR */
|
||||
#define UDC_ESR_RPS (1 << 0)
|
||||
#define UDC_ESR_TPS (1 << 1)
|
||||
#define UDC_ESR_LWO (1 << 4)
|
||||
#define UDC_ESR_FFS (1 << 6)
|
||||
|
||||
/* Bits in UDC_ECR */
|
||||
#define UDC_ECR_ESS (1 << 1)
|
||||
#define UDC_ECR_CDP (1 << 2)
|
||||
|
||||
#define UDC_ECR_FLUSH (1 << 6)
|
||||
#define UDC_ECR_DUEN (1 << 7)
|
||||
|
||||
/* Bits in UDC_UPCR0 */
|
||||
#define UDC_UPCR0_VBD (1 << 1)
|
||||
#define UDC_UPCR0_VBDS (1 << 6)
|
||||
#define UDC_UPCR0_RCD_12 (0x0 << 9)
|
||||
#define UDC_UPCR0_RCD_24 (0x1 << 9)
|
||||
#define UDC_UPCR0_RCD_48 (0x2 << 9)
|
||||
#define UDC_UPCR0_RCS_EXT (0x1 << 11)
|
||||
#define UDC_UPCR0_RCS_XTAL (0x0 << 11)
|
||||
|
||||
/* Bits in UDC_UPCR1 */
|
||||
#define UDC_UPCR1_CDT(x) ((x) << 0)
|
||||
#define UDC_UPCR1_OTGT(x) ((x) << 3)
|
||||
#define UDC_UPCR1_SQRXT(x) ((x) << 8)
|
||||
#define UDC_UPCR1_TXFSLST(x) ((x) << 12)
|
||||
|
||||
/* Bits in UDC_UPCR2 */
|
||||
#define UDC_UPCR2_TP (1 << 0)
|
||||
#define UDC_UPCR2_TXRT(x) ((x) << 2)
|
||||
#define UDC_UPCR2_TXVRT(x) ((x) << 5)
|
||||
#define UDC_UPCR2_OPMODE(x) ((x) << 9)
|
||||
#define UDC_UPCR2_XCVRSEL(x) ((x) << 12)
|
||||
#define UDC_UPCR2_TM (1 << 14)
|
||||
|
||||
/* USB Host Controller registers */
|
||||
#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000)
|
||||
#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800)
|
||||
|
||||
#define OHCI_INT_ENABLE_OFFS 0x10
|
||||
|
||||
#define RH_DESCRIPTOR_A_OFFS 0x48
|
||||
#define RH_DESCRIPTOR_B_OFFS 0x4c
|
||||
|
||||
#define USBHTCFG0_OFFS 0x100
|
||||
#define USBHHCFG0_OFFS 0x104
|
||||
#define USBHHCFG1_OFFS 0x104
|
||||
|
||||
/* DMA controller registers */
|
||||
#define DMAC0_BASE (AHB_PERI_BASE + 0x4000)
|
||||
#define DMAC1_BASE (AHB_PERI_BASE + 0xa000)
|
||||
#define DMAC2_BASE (AHB_PERI_BASE + 0x4800)
|
||||
#define DMAC3_BASE (AHB_PERI_BASE + 0xa800)
|
||||
|
||||
#define DMAC_CH_OFFSET(ch) (ch * 0x30)
|
||||
|
||||
#define ST_SADR_OFFS 0x00
|
||||
#define SPARAM_OFFS 0x04
|
||||
#define C_SADR_OFFS 0x0c
|
||||
#define ST_DADR_OFFS 0x10
|
||||
#define DPARAM_OFFS 0x14
|
||||
#define C_DADR_OFFS 0x1c
|
||||
#define HCOUNT_OFFS 0x20
|
||||
#define CHCTRL_OFFS 0x24
|
||||
#define RPTCTRL_OFFS 0x28
|
||||
#define EXTREQ_A_OFFS 0x2c
|
||||
|
||||
/* Bits in CHCTRL register */
|
||||
#define CHCTRL_EN (1 << 0)
|
||||
|
||||
#define CHCTRL_IEN (1 << 2)
|
||||
#define CHCTRL_FLAG (1 << 3)
|
||||
#define CHCTRL_WSIZE8 (0 << 4)
|
||||
#define CHCTRL_WSIZE16 (1 << 4)
|
||||
#define CHCTRL_WSIZE32 (2 << 4)
|
||||
|
||||
#define CHCTRL_BSIZE1 (0 << 6)
|
||||
#define CHCTRL_BSIZE2 (1 << 6)
|
||||
#define CHCTRL_BSIZE4 (2 << 6)
|
||||
#define CHCTRL_BSIZE8 (3 << 6)
|
||||
|
||||
#define CHCTRL_TYPE_SINGLE_E (0 << 8)
|
||||
#define CHCTRL_TYPE_HW (1 << 8)
|
||||
#define CHCTRL_TYPE_SW (2 << 8)
|
||||
#define CHCTRL_TYPE_SINGLE_L (3 << 8)
|
||||
|
||||
#define CHCTRL_BST (1 << 10)
|
||||
|
||||
/* Use DMA controller 0, channel 2 for USB */
|
||||
#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2))
|
||||
|
||||
/* NAND flash controller registers */
|
||||
#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000)
|
||||
#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000)
|
||||
|
||||
#define NFC_CMD_OFFS 0x00
|
||||
#define NFC_LADDR_OFFS 0x04
|
||||
#define NFC_BADDR_OFFS 0x08
|
||||
#define NFC_SADDR_OFFS 0x0c
|
||||
#define NFC_WDATA_OFFS 0x10
|
||||
#define NFC_LDATA_OFFS 0x20
|
||||
#define NFC_SDATA_OFFS 0x40
|
||||
#define NFC_CTRL_OFFS 0x50
|
||||
#define NFC_PSTART_OFFS 0x54
|
||||
#define NFC_RSTART_OFFS 0x58
|
||||
#define NFC_DSIZE_OFFS 0x5c
|
||||
#define NFC_IREQ_OFFS 0x60
|
||||
#define NFC_RST_OFFS 0x64
|
||||
#define NFC_CTRL1_OFFS 0x68
|
||||
#define NFC_MDATA_OFFS 0x70
|
||||
|
||||
#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS)
|
||||
|
||||
/* Bits in NFC_CTRL */
|
||||
#define NFC_CTRL_BHLD_MASK (0xf << 0)
|
||||
#define NFC_CTRL_BPW_MASK (0xf << 4)
|
||||
#define NFC_CTRL_BSTP_MASK (0xf << 8)
|
||||
#define NFC_CTRL_CADDR_MASK (0x7 << 12)
|
||||
#define NFC_CTRL_CADDR_1 (0x0 << 12)
|
||||
#define NFC_CTRL_CADDR_2 (0x1 << 12)
|
||||
#define NFC_CTRL_CADDR_3 (0x2 << 12)
|
||||
#define NFC_CTRL_CADDR_4 (0x3 << 12)
|
||||
#define NFC_CTRL_CADDR_5 (0x4 << 12)
|
||||
#define NFC_CTRL_MSK (1 << 15)
|
||||
#define NFC_CTRL_PSIZE256 (0 << 16)
|
||||
#define NFC_CTRL_PSIZE512 (1 << 16)
|
||||
#define NFC_CTRL_PSIZE1024 (2 << 16)
|
||||
#define NFC_CTRL_PSIZE2048 (3 << 16)
|
||||
#define NFC_CTRL_PSIZE4096 (4 << 16)
|
||||
#define NFC_CTRL_PSIZE_MASK (7 << 16)
|
||||
#define NFC_CTRL_BSIZE1 (0 << 19)
|
||||
#define NFC_CTRL_BSIZE2 (1 << 19)
|
||||
#define NFC_CTRL_BSIZE4 (2 << 19)
|
||||
#define NFC_CTRL_BSIZE8 (3 << 19)
|
||||
#define NFC_CTRL_BSIZE_MASK (3 << 19)
|
||||
#define NFC_CTRL_RDY (1 << 21)
|
||||
#define NFC_CTRL_CS0SEL (1 << 22)
|
||||
#define NFC_CTRL_CS1SEL (1 << 23)
|
||||
#define NFC_CTRL_CS2SEL (1 << 24)
|
||||
#define NFC_CTRL_CS3SEL (1 << 25)
|
||||
#define NFC_CTRL_CSMASK (0xf << 22)
|
||||
#define NFC_CTRL_BW (1 << 26)
|
||||
#define NFC_CTRL_FS (1 << 27)
|
||||
#define NFC_CTRL_DEN (1 << 28)
|
||||
#define NFC_CTRL_READ_IEN (1 << 29)
|
||||
#define NFC_CTRL_PROG_IEN (1 << 30)
|
||||
#define NFC_CTRL_RDY_IEN (1 << 31)
|
||||
|
||||
/* Bits in NFC_IREQ */
|
||||
#define NFC_IREQ_IRQ0 (1 << 0)
|
||||
#define NFC_IREQ_IRQ1 (1 << 1)
|
||||
#define NFC_IREQ_IRQ2 (1 << 2)
|
||||
|
||||
#define NFC_IREQ_FLAG0 (1 << 4)
|
||||
#define NFC_IREQ_FLAG1 (1 << 5)
|
||||
#define NFC_IREQ_FLAG2 (1 << 6)
|
||||
|
||||
/* MMC controller registers */
|
||||
#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000)
|
||||
#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800)
|
||||
|
||||
/* UART base addresses */
|
||||
|
||||
#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000)
|
||||
#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000)
|
||||
#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000)
|
||||
#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000)
|
||||
#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000)
|
||||
#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000)
|
||||
#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000)
|
||||
#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000)
|
||||
#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000)
|
||||
#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000)
|
||||
|
||||
#define UART_BASE UART0_BASE
|
||||
#define UART_BASE_PHYS UART0_BASE_PHYS
|
||||
|
||||
/* ECC controller */
|
||||
#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000)
|
||||
|
||||
#define ECC_CTRL_OFFS 0x00
|
||||
#define ECC_BASE_OFFS 0x04
|
||||
#define ECC_MASK_OFFS 0x08
|
||||
#define ECC_CLEAR_OFFS 0x0c
|
||||
#define ECC4_0_OFFS 0x10
|
||||
#define ECC4_1_OFFS 0x14
|
||||
|
||||
#define ECC_EADDR0_OFFS 0x50
|
||||
|
||||
#define ECC_ERRNUM_OFFS 0x90
|
||||
#define ECC_IREQ_OFFS 0x94
|
||||
|
||||
/* Bits in ECC_CTRL */
|
||||
#define ECC_CTRL_ECC4_DIEN (1 << 28)
|
||||
#define ECC_CTRL_ECC8_DIEN (1 << 29)
|
||||
#define ECC_CTRL_ECC12_DIEN (1 << 30)
|
||||
#define ECC_CTRL_ECC_DISABLE 0x0
|
||||
#define ECC_CTRL_ECC_SLC_ENC 0x8
|
||||
#define ECC_CTRL_ECC_SLC_DEC 0x9
|
||||
#define ECC_CTRL_ECC4_ENC 0xa
|
||||
#define ECC_CTRL_ECC4_DEC 0xb
|
||||
#define ECC_CTRL_ECC8_ENC 0xc
|
||||
#define ECC_CTRL_ECC8_DEC 0xd
|
||||
#define ECC_CTRL_ECC12_ENC 0xe
|
||||
#define ECC_CTRL_ECC12_DEC 0xf
|
||||
|
||||
/* Bits in ECC_IREQ */
|
||||
#define ECC_IREQ_E4DI (1 << 4)
|
||||
|
||||
#define ECC_IREQ_E4DF (1 << 20)
|
||||
#define ECC_IREQ_E4EF (1 << 21)
|
||||
|
||||
/* Interrupt controller */
|
||||
|
||||
#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000)
|
||||
#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000)
|
||||
|
||||
#define PIC0_IEN_OFFS 0x00
|
||||
#define PIC0_CREQ_OFFS 0x04
|
||||
#define PIC0_IREQ_OFFS 0x08
|
||||
#define PIC0_IRQSEL_OFFS 0x0c
|
||||
#define PIC0_SRC_OFFS 0x10
|
||||
#define PIC0_MREQ_OFFS 0x14
|
||||
#define PIC0_TSTREQ_OFFS 0x18
|
||||
#define PIC0_POL_OFFS 0x1c
|
||||
#define PIC0_IRQ_OFFS 0x20
|
||||
#define PIC0_FIQ_OFFS 0x24
|
||||
#define PIC0_MIRQ_OFFS 0x28
|
||||
#define PIC0_MFIQ_OFFS 0x2c
|
||||
#define PIC0_TMODE_OFFS 0x30
|
||||
#define PIC0_SYNC_OFFS 0x34
|
||||
#define PIC0_WKUP_OFFS 0x38
|
||||
#define PIC0_TMODEA_OFFS 0x3c
|
||||
#define PIC0_INTOEN_OFFS 0x40
|
||||
#define PIC0_MEN0_OFFS 0x44
|
||||
#define PIC0_MEN_OFFS 0x48
|
||||
|
||||
#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS)
|
||||
#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
|
||||
#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS)
|
||||
#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
|
||||
#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS)
|
||||
#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
|
||||
#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
|
||||
#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS)
|
||||
#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS)
|
||||
#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
|
||||
#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS)
|
||||
#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS)
|
||||
#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS)
|
||||
#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS)
|
||||
#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS)
|
||||
#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS)
|
||||
#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
|
||||
#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS)
|
||||
#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS)
|
||||
#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS)
|
||||
#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS)
|
||||
#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS)
|
||||
#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS)
|
||||
|
||||
#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080)
|
||||
|
||||
#define PIC1_IEN_OFFS 0x00
|
||||
#define PIC1_CREQ_OFFS 0x04
|
||||
#define PIC1_IREQ_OFFS 0x08
|
||||
#define PIC1_IRQSEL_OFFS 0x0c
|
||||
#define PIC1_SRC_OFFS 0x10
|
||||
#define PIC1_MREQ_OFFS 0x14
|
||||
#define PIC1_TSTREQ_OFFS 0x18
|
||||
#define PIC1_POL_OFFS 0x1c
|
||||
#define PIC1_IRQ_OFFS 0x20
|
||||
#define PIC1_FIQ_OFFS 0x24
|
||||
#define PIC1_MIRQ_OFFS 0x28
|
||||
#define PIC1_MFIQ_OFFS 0x2c
|
||||
#define PIC1_TMODE_OFFS 0x30
|
||||
#define PIC1_SYNC_OFFS 0x34
|
||||
#define PIC1_WKUP_OFFS 0x38
|
||||
#define PIC1_TMODEA_OFFS 0x3c
|
||||
#define PIC1_INTOEN_OFFS 0x40
|
||||
#define PIC1_MEN1_OFFS 0x44
|
||||
#define PIC1_MEN_OFFS 0x48
|
||||
|
||||
#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS)
|
||||
#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS)
|
||||
#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS)
|
||||
#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
|
||||
#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS)
|
||||
#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS)
|
||||
#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
|
||||
#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS)
|
||||
#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS)
|
||||
#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS)
|
||||
#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS)
|
||||
#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS)
|
||||
#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS)
|
||||
#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS)
|
||||
#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS)
|
||||
#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS)
|
||||
#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS)
|
||||
#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS)
|
||||
#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS)
|
||||
|
||||
/* Timer registers */
|
||||
#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000)
|
||||
#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000)
|
||||
|
||||
#define TWDCFG_OFFS 0x70
|
||||
|
||||
#define TC32EN_OFFS 0x80
|
||||
#define TC32LDV_OFFS 0x84
|
||||
#define TC32CMP0_OFFS 0x88
|
||||
#define TC32CMP1_OFFS 0x8c
|
||||
#define TC32PCNT_OFFS 0x90
|
||||
#define TC32MCNT_OFFS 0x94
|
||||
#define TC32IRQ_OFFS 0x98
|
||||
|
||||
/* Bits in TC32EN */
|
||||
#define TC32EN_PRESCALE_MASK 0x00ffffff
|
||||
#define TC32EN_ENABLE (1 << 24)
|
||||
#define TC32EN_LOADZERO (1 << 25)
|
||||
#define TC32EN_STOPMODE (1 << 26)
|
||||
#define TC32EN_LDM0 (1 << 28)
|
||||
#define TC32EN_LDM1 (1 << 29)
|
||||
|
||||
/* Bits in TC32IRQ */
|
||||
#define TC32IRQ_MSTAT_MASK 0x0000001f
|
||||
#define TC32IRQ_RSTAT_MASK (0x1f << 8)
|
||||
#define TC32IRQ_IRQEN0 (1 << 16)
|
||||
#define TC32IRQ_IRQEN1 (1 << 17)
|
||||
#define TC32IRQ_IRQEN2 (1 << 18)
|
||||
#define TC32IRQ_IRQEN3 (1 << 19)
|
||||
#define TC32IRQ_IRQEN4 (1 << 20)
|
||||
#define TC32IRQ_RSYNC (1 << 30)
|
||||
#define TC32IRQ_IRQCLR (1 << 31)
|
||||
|
||||
/* GPIO registers */
|
||||
#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOPD_DAT_OFFS 0x00
|
||||
#define GPIOPD_DOE_OFFS 0x04
|
||||
#define GPIOPD_FS0_OFFS 0x08
|
||||
#define GPIOPD_FS1_OFFS 0x0c
|
||||
#define GPIOPD_FS2_OFFS 0x10
|
||||
#define GPIOPD_RPU_OFFS 0x30
|
||||
#define GPIOPD_RPD_OFFS 0x34
|
||||
#define GPIOPD_DV0_OFFS 0x38
|
||||
#define GPIOPD_DV1_OFFS 0x3c
|
||||
|
||||
#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOPS_DAT_OFFS 0x40
|
||||
#define GPIOPS_DOE_OFFS 0x44
|
||||
#define GPIOPS_FS0_OFFS 0x48
|
||||
#define GPIOPS_FS1_OFFS 0x4c
|
||||
#define GPIOPS_FS2_OFFS 0x50
|
||||
#define GPIOPS_FS3_OFFS 0x54
|
||||
#define GPIOPS_RPU_OFFS 0x70
|
||||
#define GPIOPS_RPD_OFFS 0x74
|
||||
#define GPIOPS_DV0_OFFS 0x78
|
||||
#define GPIOPS_DV1_OFFS 0x7c
|
||||
|
||||
#define GPIOPS_FS1_SDH0_BITS 0x000000ff
|
||||
#define GPIOPS_FS1_SDH1_BITS 0x0000ff00
|
||||
|
||||
#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOPU_DAT_OFFS 0x80
|
||||
#define GPIOPU_DOE_OFFS 0x84
|
||||
#define GPIOPU_FS0_OFFS 0x88
|
||||
#define GPIOPU_FS1_OFFS 0x8c
|
||||
#define GPIOPU_FS2_OFFS 0x90
|
||||
#define GPIOPU_RPU_OFFS 0xb0
|
||||
#define GPIOPU_RPD_OFFS 0xb4
|
||||
#define GPIOPU_DV0_OFFS 0xb8
|
||||
#define GPIOPU_DV1_OFFS 0xbc
|
||||
|
||||
#define GPIOPU_FS0_TXD0 (1 << 0)
|
||||
#define GPIOPU_FS0_RXD0 (1 << 1)
|
||||
#define GPIOPU_FS0_CTS0 (1 << 2)
|
||||
#define GPIOPU_FS0_RTS0 (1 << 3)
|
||||
#define GPIOPU_FS0_TXD1 (1 << 4)
|
||||
#define GPIOPU_FS0_RXD1 (1 << 5)
|
||||
#define GPIOPU_FS0_CTS1 (1 << 6)
|
||||
#define GPIOPU_FS0_RTS1 (1 << 7)
|
||||
#define GPIOPU_FS0_TXD2 (1 << 8)
|
||||
#define GPIOPU_FS0_RXD2 (1 << 9)
|
||||
#define GPIOPU_FS0_CTS2 (1 << 10)
|
||||
#define GPIOPU_FS0_RTS2 (1 << 11)
|
||||
#define GPIOPU_FS0_TXD3 (1 << 12)
|
||||
#define GPIOPU_FS0_RXD3 (1 << 13)
|
||||
#define GPIOPU_FS0_CTS3 (1 << 14)
|
||||
#define GPIOPU_FS0_RTS3 (1 << 15)
|
||||
#define GPIOPU_FS0_TXD4 (1 << 16)
|
||||
#define GPIOPU_FS0_RXD4 (1 << 17)
|
||||
#define GPIOPU_FS0_CTS4 (1 << 18)
|
||||
#define GPIOPU_FS0_RTS4 (1 << 19)
|
||||
|
||||
#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOFC_DAT_OFFS 0xc0
|
||||
#define GPIOFC_DOE_OFFS 0xc4
|
||||
#define GPIOFC_FS0_OFFS 0xc8
|
||||
#define GPIOFC_FS1_OFFS 0xcc
|
||||
#define GPIOFC_FS2_OFFS 0xd0
|
||||
#define GPIOFC_FS3_OFFS 0xd4
|
||||
#define GPIOFC_RPU_OFFS 0xf0
|
||||
#define GPIOFC_RPD_OFFS 0xf4
|
||||
#define GPIOFC_DV0_OFFS 0xf8
|
||||
#define GPIOFC_DV1_OFFS 0xfc
|
||||
|
||||
#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOFD_DAT_OFFS 0x100
|
||||
#define GPIOFD_DOE_OFFS 0x104
|
||||
#define GPIOFD_FS0_OFFS 0x108
|
||||
#define GPIOFD_FS1_OFFS 0x10c
|
||||
#define GPIOFD_FS2_OFFS 0x110
|
||||
#define GPIOFD_RPU_OFFS 0x130
|
||||
#define GPIOFD_RPD_OFFS 0x134
|
||||
#define GPIOFD_DV0_OFFS 0x138
|
||||
#define GPIOFD_DV1_OFFS 0x13c
|
||||
|
||||
#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOLC_DAT_OFFS 0x140
|
||||
#define GPIOLC_DOE_OFFS 0x144
|
||||
#define GPIOLC_FS0_OFFS 0x148
|
||||
#define GPIOLC_FS1_OFFS 0x14c
|
||||
#define GPIOLC_RPU_OFFS 0x170
|
||||
#define GPIOLC_RPD_OFFS 0x174
|
||||
#define GPIOLC_DV0_OFFS 0x178
|
||||
#define GPIOLC_DV1_OFFS 0x17c
|
||||
|
||||
#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOLD_DAT_OFFS 0x180
|
||||
#define GPIOLD_DOE_OFFS 0x184
|
||||
#define GPIOLD_FS0_OFFS 0x188
|
||||
#define GPIOLD_FS1_OFFS 0x18c
|
||||
#define GPIOLD_FS2_OFFS 0x190
|
||||
#define GPIOLD_RPU_OFFS 0x1b0
|
||||
#define GPIOLD_RPD_OFFS 0x1b4
|
||||
#define GPIOLD_DV0_OFFS 0x1b8
|
||||
#define GPIOLD_DV1_OFFS 0x1bc
|
||||
|
||||
#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOAD_DAT_OFFS 0x1c0
|
||||
#define GPIOAD_DOE_OFFS 0x1c4
|
||||
#define GPIOAD_FS0_OFFS 0x1c8
|
||||
#define GPIOAD_RPU_OFFS 0x1f0
|
||||
#define GPIOAD_RPD_OFFS 0x1f4
|
||||
#define GPIOAD_DV0_OFFS 0x1f8
|
||||
#define GPIOAD_DV1_OFFS 0x1fc
|
||||
|
||||
#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOXC_DAT_OFFS 0x200
|
||||
#define GPIOXC_DOE_OFFS 0x204
|
||||
#define GPIOXC_FS0_OFFS 0x208
|
||||
#define GPIOXC_RPU_OFFS 0x230
|
||||
#define GPIOXC_RPD_OFFS 0x234
|
||||
#define GPIOXC_DV0_OFFS 0x238
|
||||
#define GPIOXC_DV1_OFFS 0x23c
|
||||
|
||||
#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
|
||||
|
||||
#define GPIOXC_FS0_CS0 (1 << 26)
|
||||
#define GPIOXC_FS0_CS1 (1 << 27)
|
||||
|
||||
#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
|
||||
|
||||
#define GPIOXD_DAT_OFFS 0x240
|
||||
#define GPIOXD_FS0_OFFS 0x248
|
||||
#define GPIOXD_RPU_OFFS 0x270
|
||||
#define GPIOXD_RPD_OFFS 0x274
|
||||
#define GPIOXD_DV0_OFFS 0x278
|
||||
#define GPIOXD_DV1_OFFS 0x27c
|
||||
|
||||
#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000)
|
||||
|
||||
#define GPIOPK_RST_OFFS 0x008
|
||||
#define GPIOPK_DAT_OFFS 0x100
|
||||
#define GPIOPK_DOE_OFFS 0x104
|
||||
#define GPIOPK_FS0_OFFS 0x108
|
||||
#define GPIOPK_FS1_OFFS 0x10c
|
||||
#define GPIOPK_FS2_OFFS 0x110
|
||||
#define GPIOPK_IRQST_OFFS 0x210
|
||||
#define GPIOPK_IRQEN_OFFS 0x214
|
||||
#define GPIOPK_IRQPOL_OFFS 0x218
|
||||
#define GPIOPK_IRQTM0_OFFS 0x21c
|
||||
#define GPIOPK_IRQTM1_OFFS 0x220
|
||||
#define GPIOPK_CTL_OFFS 0x22c
|
||||
|
||||
#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000)
|
||||
#define BACKUP_RAM_BASE PMGPIO_BASE
|
||||
|
||||
#define PMGPIO_DAT_OFFS 0x800
|
||||
#define PMGPIO_DOE_OFFS 0x804
|
||||
#define PMGPIO_FS0_OFFS 0x808
|
||||
#define PMGPIO_RPU_OFFS 0x810
|
||||
#define PMGPIO_RPD_OFFS 0x814
|
||||
#define PMGPIO_DV0_OFFS 0x818
|
||||
#define PMGPIO_DV1_OFFS 0x81c
|
||||
#define PMGPIO_EE0_OFFS 0x820
|
||||
#define PMGPIO_EE1_OFFS 0x824
|
||||
#define PMGPIO_CTL_OFFS 0x828
|
||||
#define PMGPIO_DI_OFFS 0x82c
|
||||
#define PMGPIO_STR_OFFS 0x830
|
||||
#define PMGPIO_STF_OFFS 0x834
|
||||
#define PMGPIO_POL_OFFS 0x838
|
||||
#define PMGPIO_APB_OFFS 0x800
|
||||
|
||||
/* Clock controller registers */
|
||||
#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
|
||||
|
||||
#define CLKCTRL_OFFS 0x00
|
||||
#define PLL0CFG_OFFS 0x04
|
||||
#define PLL1CFG_OFFS 0x08
|
||||
#define CLKDIVC0_OFFS 0x0c
|
||||
|
||||
#define BCLKCTR0_OFFS 0x14
|
||||
#define SWRESET0_OFFS 0x18
|
||||
|
||||
#define BCLKCTR1_OFFS 0x60
|
||||
#define SWRESET1_OFFS 0x64
|
||||
#define PWDCTL_OFFS 0x68
|
||||
#define PLL2CFG_OFFS 0x6c
|
||||
#define CLKDIVC1_OFFS 0x70
|
||||
|
||||
#define ACLKREF_OFFS 0x80
|
||||
#define ACLKI2C_OFFS 0x84
|
||||
#define ACLKSPI0_OFFS 0x88
|
||||
#define ACLKSPI1_OFFS 0x8c
|
||||
#define ACLKUART0_OFFS 0x90
|
||||
#define ACLKUART1_OFFS 0x94
|
||||
#define ACLKUART2_OFFS 0x98
|
||||
#define ACLKUART3_OFFS 0x9c
|
||||
#define ACLKUART4_OFFS 0xa0
|
||||
#define ACLKTCT_OFFS 0xa4
|
||||
#define ACLKTCX_OFFS 0xa8
|
||||
#define ACLKTCZ_OFFS 0xac
|
||||
#define ACLKADC_OFFS 0xb0
|
||||
#define ACLKDAI0_OFFS 0xb4
|
||||
#define ACLKDAI1_OFFS 0xb8
|
||||
#define ACLKLCD_OFFS 0xbc
|
||||
#define ACLKSPDIF_OFFS 0xc0
|
||||
#define ACLKUSBH_OFFS 0xc4
|
||||
#define ACLKSDH0_OFFS 0xc8
|
||||
#define ACLKSDH1_OFFS 0xcc
|
||||
#define ACLKC3DEC_OFFS 0xd0
|
||||
#define ACLKEXT_OFFS 0xd4
|
||||
#define ACLKCAN0_OFFS 0xd8
|
||||
#define ACLKCAN1_OFFS 0xdc
|
||||
#define ACLKGSB0_OFFS 0xe0
|
||||
#define ACLKGSB1_OFFS 0xe4
|
||||
#define ACLKGSB2_OFFS 0xe8
|
||||
#define ACLKGSB3_OFFS 0xec
|
||||
|
||||
#define PLLxCFG_PD (1 << 31)
|
||||
|
||||
/* CLKCTRL bits */
|
||||
#define CLKCTRL_XE (1 << 31)
|
||||
|
||||
/* CLKDIVCx bits */
|
||||
#define CLKDIVC0_XTE (1 << 7)
|
||||
#define CLKDIVC0_XE (1 << 15)
|
||||
#define CLKDIVC0_P1E (1 << 23)
|
||||
#define CLKDIVC0_P0E (1 << 31)
|
||||
|
||||
#define CLKDIVC1_P2E (1 << 7)
|
||||
|
||||
/* BCLKCTR0 clock bits */
|
||||
#define BCLKCTR0_USBD (1 << 4)
|
||||
#define BCLKCTR0_ECC (1 << 9)
|
||||
#define BCLKCTR0_USBH0 (1 << 11)
|
||||
#define BCLKCTR0_NFC (1 << 16)
|
||||
|
||||
/* BCLKCTR1 clock bits */
|
||||
#define BCLKCTR1_USBH1 (1 << 20)
|
||||
|
||||
/* SWRESET0 bits */
|
||||
#define SWRESET0_USBD (1 << 4)
|
||||
#define SWRESET0_USBH0 (1 << 11)
|
||||
|
||||
/* SWRESET1 bits */
|
||||
#define SWRESET1_USBH1 (1 << 20)
|
||||
|
||||
/* System clock sources.
|
||||
* Note: These are the clock sources that serve as parents for
|
||||
* all other clocks. They have no parents themselves.
|
||||
*
|
||||
* These values are used for struct clk->root_id. All clocks
|
||||
* that are not system clock sources have this value set to
|
||||
* CLK_SRC_NOROOT.
|
||||
* The values for system clocks start with CLK_SRC_PLL0 == 0
|
||||
* because this gives us exactly the values needed for the lower
|
||||
* 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
|
||||
* defined as -1 to not disturb the order.
|
||||
*/
|
||||
enum root_clks {
|
||||
CLK_SRC_NOROOT = -1,
|
||||
CLK_SRC_PLL0 = 0,
|
||||
CLK_SRC_PLL1,
|
||||
CLK_SRC_PLL0DIV,
|
||||
CLK_SRC_PLL1DIV,
|
||||
CLK_SRC_XI,
|
||||
CLK_SRC_XIDIV,
|
||||
CLK_SRC_XTI,
|
||||
CLK_SRC_XTIDIV,
|
||||
CLK_SRC_PLL2,
|
||||
CLK_SRC_PLL2DIV,
|
||||
CLK_SRC_PK0,
|
||||
CLK_SRC_PK1,
|
||||
CLK_SRC_PK2,
|
||||
CLK_SRC_PK3,
|
||||
CLK_SRC_PK4,
|
||||
CLK_SRC_48MHZ
|
||||
};
|
||||
|
||||
#define CLK_SRC_MASK 0xf
|
||||
|
||||
/* Bits in ACLK* registers */
|
||||
#define ACLK_EN (1 << 28)
|
||||
#define ACLK_SEL_SHIFT 24
|
||||
#define ACLK_SEL_MASK 0x0f000000
|
||||
#define ACLK_DIV_MASK 0x00000fff
|
||||
|
||||
/* System configuration registers */
|
||||
|
||||
#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000)
|
||||
|
||||
#define BMI_OFFS 0x00
|
||||
#define AHBCON0_OFFS 0x04
|
||||
#define APBPWE_OFFS 0x08
|
||||
#define DTCMWAIT_OFFS 0x0c
|
||||
#define ECCSEL_OFFS 0x10
|
||||
#define AHBCON1_OFFS 0x14
|
||||
#define SDHCFG_OFFS 0x18
|
||||
#define REMAP_OFFS 0x20
|
||||
#define LCDSIAE_OFFS 0x24
|
||||
#define XMCCFG_OFFS 0xe0
|
||||
#define IMCCFG_OFFS 0xe4
|
||||
|
||||
/* Values for ECCSEL */
|
||||
#define ECCSEL_EXTMEM 0x0
|
||||
#define ECCSEL_DTCM 0x1
|
||||
#define ECCSEL_INT_SRAM 0x2
|
||||
#define ECCSEL_AHB 0x3
|
||||
|
||||
/* Bits in XMCCFG */
|
||||
#define XMCCFG_NFCE (1 << 1)
|
||||
#define XMCCFG_FDXD (1 << 2)
|
||||
|
||||
/* External memory controller registers */
|
||||
|
||||
#define EMC_BASE EXT_MEM_CTRL_BASE
|
||||
|
||||
#define SDCFG_OFFS 0x00
|
||||
#define SDFSM_OFFS 0x04
|
||||
#define MCFG_OFFS 0x08
|
||||
|
||||
#define CSCFG0_OFFS 0x10
|
||||
#define CSCFG1_OFFS 0x14
|
||||
#define CSCFG2_OFFS 0x18
|
||||
#define CSCFG3_OFFS 0x1c
|
||||
|
||||
#define MCFG_SDEN (1 << 4)
|
||||
|
||||
#endif /* TCC8K_REGS_H */
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
/*
|
||||
* A definition needed by arch core code.
|
||||
*
|
||||
*/
|
||||
#define CLOCK_TICK_RATE (HZ * 100000UL)
|
||||
|
|
@ -1,34 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
|
||||
*
|
||||
* This file is licensed under the terms of the GPL version 2.
|
||||
*/
|
||||
|
||||
#include <linux/serial_reg.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <mach/tcc8k-regs.h>
|
||||
|
||||
unsigned int system_rev;
|
||||
|
||||
#define ID_MASK 0x7fff
|
||||
|
||||
static void putc(int c)
|
||||
{
|
||||
u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
|
||||
u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
|
||||
|
||||
while (!(*uart_lsr & UART_LSR_THRE))
|
||||
barrier();
|
||||
*uart_tx = c;
|
||||
}
|
||||
|
||||
static inline void flush(void)
|
||||
{
|
||||
}
|
||||
|
||||
/*
|
||||
* nothing to do
|
||||
*/
|
||||
#define arch_decomp_setup()
|
||||
#define arch_decomp_wdog()
|
||||
|
|
@ -1,10 +0,0 @@
|
|||
/*
|
||||
* Author: <linux@telechips.com>
|
||||
* Created: June 10, 2008
|
||||
*
|
||||
* Copyright (C) 2000 Russell King.
|
||||
* Copyright (C) 2008-2009 Telechips
|
||||
*
|
||||
* Licensed under the terms of the GPL v2.
|
||||
*/
|
||||
#define VMALLOC_END 0xf0000000UL
|
||||
|
|
@ -1,25 +0,0 @@
|
|||
/*
|
||||
* System functions for Telechips TCCxxxx SoCs
|
||||
*
|
||||
* Copyright (C) Hans J. Koch <hjk@linutronix.de>
|
||||
*
|
||||
* Licensed under the terms of the GPL v2.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <mach/tcc8k-regs.h>
|
||||
|
||||
/* System reboot */
|
||||
void plat_tcc_reboot(void)
|
||||
{
|
||||
/* Make sure clocks are on */
|
||||
__raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
|
||||
|
||||
/* Enable watchdog reset */
|
||||
__raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
|
||||
/* Wait for reset */
|
||||
while(1)
|
||||
;
|
||||
}
|
||||
Loading…
Reference in a new issue