redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

qla2xxx: Remove unnecessary delays from fw dump code path.

Browse source 
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This commit is contained in:
Hiral Patel 2014-04-11 16:54:20 -04:00 committed by Christoph Hellwig
parent 4babb90e57
commit 2f389fc472
2 changed files with 32 additions and 41 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

71
drivers/scsi/qla2xxx/qla_dbg.c
View file

@ -296,23 +296,13 @@ qla24xx_read_window(struct device_reg_24xx __iomem *reg, uint32_t iobase,
return buf;
}
int
void
qla24xx_pause_risc(struct device_reg_24xx __iomem *reg)
{
int rval = QLA_SUCCESS;
uint32_t cnt;
WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
for (cnt = 30000;
((RD_REG_DWORD(&reg->host_status) & HSRX_RISC_PAUSED) == 0) &&
rval == QLA_SUCCESS; cnt--) {
if (cnt)
udelay(100);
else
rval = QLA_FUNCTION_TIMEOUT;
}
return rval;
/* 100 usec delay is sufficient enough for hardware to pause RISC */
udelay(100);
}
int
@ -320,10 +310,14 @@ qla24xx_soft_reset(struct qla_hw_data *ha)
{
int rval = QLA_SUCCESS;
uint32_t cnt;
uint16_t mb0, wd;
uint16_t wd;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
/* Reset RISC. */
/*
* Reset RISC. The delay is dependent on system architecture.
* Driver can proceed with the reset sequence after waiting
* for a timeout period.
*/
WRT_REG_DWORD(&reg->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
for (cnt = 0; cnt < 30000; cnt++) {
if ((RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE) == 0)
@ -337,13 +331,6 @@ qla24xx_soft_reset(struct qla_hw_data *ha)
pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
udelay(100);
/* Wait for firmware to complete NVRAM accesses. */
mb0 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
for (cnt = 10000 ; cnt && mb0; cnt--) {
udelay(5);
mb0 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
barrier();
}
/* Wait for soft-reset to complete. */
for (cnt = 0; cnt < 30000; cnt++) {
@ -356,10 +343,10 @@ qla24xx_soft_reset(struct qla_hw_data *ha)
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_RESET);
RD_REG_DWORD(&reg->hccr); /* PCI Posting. */
for (cnt = 30000; RD_REG_WORD(&reg->mailbox0) != 0 &&
for (cnt = 10000; RD_REG_WORD(&reg->mailbox0) != 0 &&
rval == QLA_SUCCESS; cnt--) {
if (cnt)
udelay(100);
udelay(10);
else
rval = QLA_FUNCTION_TIMEOUT;
}
@ -1075,10 +1062,11 @@ qla24xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
fw->host_status = htonl(RD_REG_DWORD(&reg->host_status));
/* Pause RISC. */
rval = qla24xx_pause_risc(reg);
if (rval != QLA_SUCCESS)
goto qla24xx_fw_dump_failed_0;
/*
* Pause RISC. No need to track timeout, as resetting the chip
* is the right approach incase of pause timeout
*/
qla24xx_pause_risc(reg);
/* Host interface registers. */
dmp_reg = &reg->flash_addr;
@ -1325,10 +1313,11 @@ qla25xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
fw->host_status = htonl(RD_REG_DWORD(&reg->host_status));
/* Pause RISC. */
rval = qla24xx_pause_risc(reg);
if (rval != QLA_SUCCESS)
goto qla25xx_fw_dump_failed_0;
/*
* Pause RISC. No need to track timeout, as resetting the chip
* is the right approach incase of pause timeout
*/
qla24xx_pause_risc(reg);
/* Host/Risc registers. */
iter_reg = fw->host_risc_reg;
@ -1641,10 +1630,11 @@ qla81xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
fw->host_status = htonl(RD_REG_DWORD(&reg->host_status));
/* Pause RISC. */
rval = qla24xx_pause_risc(reg);
if (rval != QLA_SUCCESS)
goto qla81xx_fw_dump_failed_0;
/*
* Pause RISC. No need to track timeout, as resetting the chip
* is the right approach incase of pause timeout
*/
qla24xx_pause_risc(reg);
/* Host/Risc registers. */
iter_reg = fw->host_risc_reg;
@ -1959,10 +1949,11 @@ qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
fw->host_status = htonl(RD_REG_DWORD(&reg->host_status));
/* Pause RISC. */
rval = qla24xx_pause_risc(reg);
if (rval != QLA_SUCCESS)
goto qla83xx_fw_dump_failed_0;
/*
* Pause RISC. No need to track timeout, as resetting the chip
* is the right approach incase of pause timeout
*/
qla24xx_pause_risc(reg);
WRT_REG_DWORD(&reg->iobase_addr, 0x6000);
dmp_reg = &reg->iobase_window;

2
drivers/scsi/qla2xxx/qla_dbg.h
View file

@ -353,5 +353,5 @@ extern int qla27xx_dump_mpi_ram(struct qla_hw_data *, uint32_t, uint32_t *,
uint32_t, void **);
extern int qla24xx_dump_ram(struct qla_hw_data *, uint32_t, uint32_t *,
uint32_t, void **);
extern int qla24xx_pause_risc(struct device_reg_24xx __iomem *);
extern void qla24xx_pause_risc(struct device_reg_24xx __iomem *);
extern int qla24xx_soft_reset(struct qla_hw_data *);