From 2fc94b5f229a5d9d1db7fd91d0a4808cfeb915f5 Mon Sep 17 00:00:00 2001 From: Fu Wei Date: Mon, 29 Feb 2016 16:46:47 +0800 Subject: [PATCH] Documentation: add sbsa-gwdt driver documentation The sbsa-gwdt.txt documentation in devicetree/bindings/watchdog is for introducing SBSA(Server Base System Architecture) Generic Watchdog device node info into FDT. Also add sbsa-gwdt introduction in watchdog-parameters.txt Acked-by: Arnd Bergmann Acked-by: Rob Herring Signed-off-by: Fu Wei Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- .../bindings/watchdog/sbsa-gwdt.txt | 31 +++++++++++++++++++ .../watchdog/watchdog-parameters.txt | 7 +++++ 2 files changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt diff --git a/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt b/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt new file mode 100644 index 000000000000..6f2d5f91964d --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt @@ -0,0 +1,31 @@ +* SBSA (Server Base System Architecture) Generic Watchdog + +The SBSA Generic Watchdog Timer is used to force a reset of the system +after two stages of timeout have elapsed. A detailed definition of the +watchdog timer can be found in the ARM document: ARM-DEN-0029 - Server +Base System Architecture (SBSA) + +Required properties: +- compatible: Should at least contain "arm,sbsa-gwdt". + +- reg: Each entry specifies the base physical address of a register frame + and the length of that frame; currently, two frames must be defined, + in this order: + 1: Watchdog control frame; + 2: Refresh frame. + +- interrupts: Should contain the Watchdog Signal 0 (WS0) SPI (Shared + Peripheral Interrupt) number of SBSA Generic Watchdog. + +Optional properties +- timeout-sec: Watchdog timeout values (in seconds). + +Example for FVP Foundation Model v8: + +watchdog@2a440000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x0 0x2a440000 0 0x1000>, + <0x0 0x2a450000 0 0x1000>; + interrupts = <0 27 4>; + timeout-sec = <30>; +}; diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt index 53dfc73e0171..beb0ae7bb3e6 100644 --- a/Documentation/watchdog/watchdog-parameters.txt +++ b/Documentation/watchdog/watchdog-parameters.txt @@ -289,6 +289,13 @@ sbc_fitpc2_wdt: margin: Watchdog margin in seconds (default 60s) nowayout: Watchdog cannot be stopped once started ------------------------------------------------- +sbsa_gwdt: +timeout: Watchdog timeout in seconds. (default 10s) +action: Watchdog action at the first stage timeout, + set to 0 to ignore, 1 to panic. (default=0) +nowayout: Watchdog cannot be stopped once started + (default=kernel config parameter) +------------------------------------------------- sc1200wdt: isapnp: When set to 0 driver ISA PnP support will be disabled (default=1) io: io port