Merge remote-tracking branches 'regulator/topic/axp20x', 'regulator/topic/da9211' and 'regulator/topic/fan53555' into regulator-next

2015-02-08 11:16:23 +08:00 · 2015-02-08 11:16:23 +08:00 · 30c5c53042
parent fca8e13f50 765e802325 8c7dd8bce0 121b567d8f
commit 30c5c53042
5 changed files with 61 additions and 61 deletions
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@ -11,6 +11,7 @@ Required properties:
  BUCKA and BUCKB.

 Optional properties:
+- enable-gpios: platform gpio for control of BUCKA/BUCKB.
 - Any optional property defined in regulator.txt

 Example 1) DA9211
@ -27,6 +28,7 @@ Example 1) DA9211
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <2000000>;
 				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 27 0>;
 			};
 			BUCKB {
 				regulator-name = "VBUCKB";
@ -34,11 +36,12 @@ Example 1) DA9211
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <2000000>;
 				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 17 0>;
 			};
 		};
 	};

-Example 2) DA92113
+Example 2) DA9213
 	pmic: da9213@68 {
 		compatible = "dlg,da9213";
 		reg = <0x68>;
@ -51,6 +54,7 @@ Example 2) DA92113
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <3000000>;
 				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
 			};
 			BUCKB {
 				regulator-name = "VBUCKB";
@ -58,6 +62,7 @@ Example 2) DA92113
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <3000000>;
 				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 17 0>;
 			};
 		};
 	};
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@ -32,11 +32,13 @@

 #define AXP20X_FREQ_DCDC_MASK		0x0f

-#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg,   \
-		       _emask, _enable_val, _disable_val)			\
+#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask,	\
+		       _ereg, _emask, _enable_val, _disable_val)		\
 	[AXP20X_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
+		.of_match	= of_match_ptr(_match),				\
+		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
 		.id		= AXP20X_##_id,					\
 		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
@ -52,11 +54,13 @@
 		.ops		= &axp20x_ops,					\
 	}

-#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg,	\
-		    _emask) 							\
+#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask,	\
+		    _ereg, _emask)						\
 	[AXP20X_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
+		.of_match	= of_match_ptr(_match),				\
+		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
 		.id		= AXP20X_##_id,					\
 		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
@ -70,10 +74,12 @@
 		.ops		= &axp20x_ops,					\
 	}

-#define AXP20X_DESC_FIXED(_id, _supply, _volt)					\
+#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt)				\
 	[AXP20X_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
+		.of_match	= of_match_ptr(_match),				\
+		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
 		.id		= AXP20X_##_id,					\
 		.n_voltages	= 1,						\
@ -82,10 +88,13 @@
 		.ops		= &axp20x_ops_fixed				\
 	}

-#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask)	\
+#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg,	\
+			  _emask)						\
 	[AXP20X_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
+		.of_match	= of_match_ptr(_match),				\
+		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
 		.id		= AXP20X_##_id,					\
 		.n_voltages	= ARRAY_SIZE(_table),				\
@ -127,36 +136,20 @@ static struct regulator_ops axp20x_ops = {
 };

 static const struct regulator_desc axp20x_regulators[] = {
-	AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
-		    AXP20X_PWR_OUT_CTRL, 0x10),
-	AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
-		    AXP20X_PWR_OUT_CTRL, 0x02),
-	AXP20X_DESC_FIXED(LDO1, "acin", 1300),
-	AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
-		    AXP20X_PWR_OUT_CTRL, 0x04),
-	AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
-		    AXP20X_PWR_OUT_CTRL, 0x40),
-	AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
-			  AXP20X_PWR_OUT_CTRL, 0x08),
-	AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
-		       AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED,
-		       AXP20X_IO_DISABLED),
-};
-
-#define AXP_MATCH(_name, _id) \
-	[AXP20X_##_id] = { \
-		.name		= #_name, \
-		.driver_data	= (void *) &axp20x_regulators[AXP20X_##_id], \
-	}
-
-static struct of_regulator_match axp20x_matches[] = {
-	AXP_MATCH(dcdc2, DCDC2),
-	AXP_MATCH(dcdc3, DCDC3),
-	AXP_MATCH(ldo1, LDO1),
-	AXP_MATCH(ldo2, LDO2),
-	AXP_MATCH(ldo3, LDO3),
-	AXP_MATCH(ldo4, LDO4),
-	AXP_MATCH(ldo5, LDO5),
+	AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT,
+		    0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
+	AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT,
+		    0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
+	AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300),
+	AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
+		    AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
+	AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT,
+		    0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
+	AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
+			  AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
+	AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
+		       AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
+		       AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
 };

 static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
@ -193,13 +186,6 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
 	if (!regulators) {
 		dev_warn(&pdev->dev, "regulators node not found\n");
 	} else {
-		ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches,
-					 ARRAY_SIZE(axp20x_matches));
-		if (ret < 0) {
-			dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
-			return ret;
-		}
-
 		dcdcfreq = 1500;
 		of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
 		ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
@ -233,23 +219,17 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev;
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
-	struct regulator_config config = { };
-	struct regulator_init_data *init_data;
+	struct regulator_config config = {
+		.dev = pdev->dev.parent,
+		.regmap = axp20x->regmap,
+	};
 	int ret, i;
 	u32 workmode;

-	ret = axp20x_regulator_parse_dt(pdev);
-	if (ret)
-		return ret;
+	/* This only sets the dcdc freq. Ignore any errors */
+	axp20x_regulator_parse_dt(pdev);

 	for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
-		init_data = axp20x_matches[i].init_data;
-
-		config.dev = pdev->dev.parent;
-		config.init_data = init_data;
-		config.regmap = axp20x->regmap;
-		config.of_node = axp20x_matches[i].of_node;
-
 		rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i],
 					       &config);
 		if (IS_ERR(rdev)) {
@ -259,7 +239,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 			return PTR_ERR(rdev);
 		}

-		ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode",
+		ret = of_property_read_u32(rdev->dev.of_node,
+					   "x-powers,dcdc-workmode",
 					   &workmode);
 		if (!ret) {
 			if (axp20x_set_dcdc_workmode(rdev, i, workmode))
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@ -24,6 +24,7 @@
 #include <linux/regmap.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/of_gpio.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/da9211.h>
 #include "da9211-regulator.h"
@ -276,7 +277,10 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
 			continue;

 		pdata->init_data[n] = da9211_matches[i].init_data;
-
+		pdata->reg_node[n] = da9211_matches[i].of_node;
+		pdata->gpio_ren[n] =
+			of_get_named_gpio(da9211_matches[i].of_node,
+				"enable-gpios", 0);
 		n++;
 	}

@ -364,7 +368,15 @@ static int da9211_regulator_init(struct da9211 *chip)
 		config.dev = chip->dev;
 		config.driver_data = chip;
 		config.regmap = chip->regmap;
-		config.of_node = chip->dev->of_node;
+		config.of_node = chip->pdata->reg_node[i];
+
+		if (gpio_is_valid(chip->pdata->gpio_ren[i])) {
+			config.ena_gpio = chip->pdata->gpio_ren[i];
+			config.ena_gpio_initialized = true;
+		} else {
+			config.ena_gpio = -EINVAL;
+			config.ena_gpio_initialized = false;
+		}

 		chip->rdev[i] = devm_regulator_register(chip->dev,
 			&da9211_regulators[i], &config);
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@ -147,7 +147,7 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
 		return REGULATOR_MODE_NORMAL;
 }

-static int slew_rates[] = {
+static const int slew_rates[] = {
 	64000,
 	32000,
 	16000,
@ -296,7 +296,7 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
 	return PTR_ERR_OR_ZERO(di->rdev);
 }

-static struct regmap_config fan53555_regmap_config = {
+static const struct regmap_config fan53555_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };
--- a/include/linux/regulator/da9211.h
+++ b/include/linux/regulator/da9211.h
@ -32,6 +32,8 @@ struct da9211_pdata {
 	 * 2 : 2 phase 2 buck
 	 */
 	int num_buck;
+	int gpio_ren[DA9211_MAX_REGULATORS];
+	struct device_node *reg_node[DA9211_MAX_REGULATORS];
 	struct regulator_init_data *init_data[DA9211_MAX_REGULATORS];
 };
 #endif