diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 75fdfaf41831..e39f0bc1f55e 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -39,6 +39,12 @@ to get matched with their hardware counterparts as follow: -BUCKn : 1-4. Use standard regulator bindings for it ('regulator-off-in-suspend'). + LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable + control. To turn this feature on this property must be added to the regulator + sub-node: + - maxim,ena-gpios : one GPIO specifier enable control (the gpio + flags are actually ignored and always + ACTIVE_HIGH is used) Example: @@ -65,4 +71,12 @@ Example: regulator-always-on; regulator-boot-on; }; + + buck9_reg { + regulator-compatible = "BUCK9"; + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; + }; } diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt index 240019a82f9a..eb618907c7de 100644 --- a/Documentation/devicetree/bindings/regulator/da9211.txt +++ b/Documentation/devicetree/bindings/regulator/da9211.txt @@ -11,6 +11,7 @@ Required properties: BUCKA and BUCKB. Optional properties: +- enable-gpios: platform gpio for control of BUCKA/BUCKB. - Any optional property defined in regulator.txt Example 1) DA9211 @@ -27,6 +28,7 @@ Example 1) DA9211 regulator-max-microvolt = <1570000>; regulator-min-microamp = <2000000>; regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 27 0>; }; BUCKB { regulator-name = "VBUCKB"; @@ -34,11 +36,12 @@ Example 1) DA9211 regulator-max-microvolt = <1570000>; regulator-min-microamp = <2000000>; regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 17 0>; }; }; }; -Example 2) DA92113 +Example 2) DA9213 pmic: da9213@68 { compatible = "dlg,da9213"; reg = <0x68>; @@ -51,6 +54,7 @@ Example 2) DA92113 regulator-max-microvolt = <1570000>; regulator-min-microamp = <3000000>; regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; }; BUCKB { regulator-name = "VBUCKB"; @@ -58,6 +62,7 @@ Example 2) DA92113 regulator-max-microvolt = <1570000>; regulator-min-microamp = <3000000>; regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 17 0>; }; }; }; diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt index a626fc1bbf0d..d6e7c9ec9413 100644 --- a/Documentation/devicetree/bindings/regulator/isl9305.txt +++ b/Documentation/devicetree/bindings/regulator/isl9305.txt @@ -2,7 +2,7 @@ Intersil ISL9305/ISL9305H voltage regulator Required properties: -- compatible: "isl,isl9305" or "isl,isl9305h" +- compatible: "isil,isl9305" or "isil,isl9305h" - reg: I2C slave address, usually 0x68. - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name, with valid @@ -19,7 +19,7 @@ Optional properties: Example pmic: isl9305@68 { - compatible = "isl,isl9305"; + compatible = "isil,isl9305"; reg = <0x68>; VINDCD1-supply = <&system_power>; diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt new file mode 100644 index 000000000000..a42b1d6e9863 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt @@ -0,0 +1,217 @@ +Mediatek MT6397 Regulator Driver + +Required properties: +- compatible: "mediatek,mt6397-regulator" +- mt6397regulator: List of regulators provided by this controller. It is named + according to its regulator type, buck_ and ldo_. + The definition for each of these nodes is defined using the standard binding + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu, + buck_vdrm, buck_vio18 +LDO: + ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, + ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6, + ldo_vibr + +Example: + pmic { + compatible = "mediatek,mt6397"; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <200>; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <500>; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2120000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <500>; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + /* fixed output 2.8 V */ + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + /* fixed output 2.8 V */ + regulator-enable-ramp-delay = <240>; + }; + + mt6397_usb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + /* fixed output 3.3 V */ + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1220000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + egulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index 34ef5d16d0f1..9b40db88f637 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -1,7 +1,7 @@ PFUZE100 family of regulators Required properties: -- compatible: "fsl,pfuze100" or "fsl,pfuze200" +- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000" - reg: I2C slave address Required child node: @@ -14,6 +14,8 @@ Required child node: sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 --PFUZE200 sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6 + --PFUZE3000 + sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 Each regulator is defined using the standard binding for regulators. @@ -205,3 +207,93 @@ Example 2: PFUZE200 }; }; }; + +Example 3: PFUZE3000 + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index c3a60b57a865..a6f116aa5235 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -414,6 +414,14 @@ config REGULATOR_MAX77802 Exynos5420/Exynos5800 SoCs to control various voltages. It includes support for control of voltage and ramp speed. +config REGULATOR_MAX77843 + tristate "Maxim 77843 regulator" + depends on MFD_MAX77843 + help + This driver controls a Maxim 77843 regulator. + The regulator include two 'SAFEOUT' for USB(Universal Serial Bus) + This is suitable for Exynos5433 SoC chips. + config REGULATOR_MC13XXX_CORE tristate @@ -433,6 +441,15 @@ config REGULATOR_MC13892 Say y here to support the regulators found on the Freescale MC13892 PMIC. +config REGULATOR_MT6397 + tristate "MediaTek MT6397 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6397 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_PALMAS tristate "TI Palmas PMIC Regulators" depends on MFD_PALMAS diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 1f28ebfc6f3a..2c4da15e1545 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -55,9 +55,11 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o +obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o +obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index f23d7e1f2ee7..e4331f5e5d7d 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -32,11 +32,13 @@ #define AXP20X_FREQ_DCDC_MASK 0x0f -#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ - _emask, _enable_val, _disable_val) \ +#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ + _ereg, _emask, _enable_val, _disable_val) \ [AXP20X_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = AXP20X_##_id, \ .n_voltages = (((_max) - (_min)) / (_step) + 1), \ @@ -52,11 +54,13 @@ .ops = &axp20x_ops, \ } -#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ - _emask) \ +#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ + _ereg, _emask) \ [AXP20X_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = AXP20X_##_id, \ .n_voltages = (((_max) - (_min)) / (_step) + 1), \ @@ -70,10 +74,12 @@ .ops = &axp20x_ops, \ } -#define AXP20X_DESC_FIXED(_id, _supply, _volt) \ +#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt) \ [AXP20X_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = AXP20X_##_id, \ .n_voltages = 1, \ @@ -82,10 +88,13 @@ .ops = &axp20x_ops_fixed \ } -#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \ +#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg, \ + _emask) \ [AXP20X_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = AXP20X_##_id, \ .n_voltages = ARRAY_SIZE(_table), \ @@ -127,36 +136,20 @@ static struct regulator_ops axp20x_ops = { }; static const struct regulator_desc axp20x_regulators[] = { - AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, - AXP20X_PWR_OUT_CTRL, 0x10), - AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f, - AXP20X_PWR_OUT_CTRL, 0x02), - AXP20X_DESC_FIXED(LDO1, "acin", 1300), - AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0, - AXP20X_PWR_OUT_CTRL, 0x04), - AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, - AXP20X_PWR_OUT_CTRL, 0x40), - AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f, - AXP20X_PWR_OUT_CTRL, 0x08), - AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, - AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, - AXP20X_IO_DISABLED), -}; - -#define AXP_MATCH(_name, _id) \ - [AXP20X_##_id] = { \ - .name = #_name, \ - .driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \ - } - -static struct of_regulator_match axp20x_matches[] = { - AXP_MATCH(dcdc2, DCDC2), - AXP_MATCH(dcdc3, DCDC3), - AXP_MATCH(ldo1, LDO1), - AXP_MATCH(ldo2, LDO2), - AXP_MATCH(ldo3, LDO3), - AXP_MATCH(ldo4, LDO4), - AXP_MATCH(ldo5, LDO5), + AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, + 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), + AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, + 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), + AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300), + AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100, + AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), + AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, + 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), + AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, + AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), + AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100, + AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, + AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), }; static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) @@ -193,13 +186,6 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) if (!regulators) { dev_warn(&pdev->dev, "regulators node not found\n"); } else { - ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches, - ARRAY_SIZE(axp20x_matches)); - if (ret < 0) { - dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); - return ret; - } - dcdcfreq = 1500; of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); @@ -233,23 +219,17 @@ static int axp20x_regulator_probe(struct platform_device *pdev) { struct regulator_dev *rdev; struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); - struct regulator_config config = { }; - struct regulator_init_data *init_data; + struct regulator_config config = { + .dev = pdev->dev.parent, + .regmap = axp20x->regmap, + }; int ret, i; u32 workmode; - ret = axp20x_regulator_parse_dt(pdev); - if (ret) - return ret; + /* This only sets the dcdc freq. Ignore any errors */ + axp20x_regulator_parse_dt(pdev); for (i = 0; i < AXP20X_REG_ID_MAX; i++) { - init_data = axp20x_matches[i].init_data; - - config.dev = pdev->dev.parent; - config.init_data = init_data; - config.regmap = axp20x->regmap; - config.of_node = axp20x_matches[i].of_node; - rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], &config); if (IS_ERR(rdev)) { @@ -259,7 +239,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev) return PTR_ERR(rdev); } - ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode", + ret = of_property_read_u32(rdev->dev.of_node, + "x-powers,dcdc-workmode", &workmode); if (!ret) { if (axp20x_set_dcdc_workmode(rdev, i, workmode)) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9c48fb32f660..b899947d839d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -632,49 +632,34 @@ static ssize_t regulator_bypass_show(struct device *dev, static DEVICE_ATTR(bypass, 0444, regulator_bypass_show, NULL); -/* - * These are the only attributes are present for all regulators. - * Other attributes are a function of regulator functionality. - */ -static struct attribute *regulator_dev_attrs[] = { - &dev_attr_name.attr, - &dev_attr_num_users.attr, - &dev_attr_type.attr, - NULL, -}; -ATTRIBUTE_GROUPS(regulator_dev); - -static void regulator_dev_release(struct device *dev) -{ - struct regulator_dev *rdev = dev_get_drvdata(dev); - kfree(rdev); -} - -static struct class regulator_class = { - .name = "regulator", - .dev_release = regulator_dev_release, - .dev_groups = regulator_dev_groups, -}; - /* Calculate the new optimum regulator operating mode based on the new total * consumer load. All locks held by caller */ -static void drms_uA_update(struct regulator_dev *rdev) +static int drms_uA_update(struct regulator_dev *rdev) { struct regulator *sibling; int current_uA = 0, output_uV, input_uV, err; unsigned int mode; + /* + * first check to see if we can set modes at all, otherwise just + * tell the consumer everything is OK. + */ err = regulator_check_drms(rdev); - if (err < 0 || !rdev->desc->ops->get_optimum_mode || - (!rdev->desc->ops->get_voltage && - !rdev->desc->ops->get_voltage_sel) || - !rdev->desc->ops->set_mode) - return; + if (err < 0) + return 0; + + if (!rdev->desc->ops->get_optimum_mode) + return 0; + + if (!rdev->desc->ops->set_mode) + return -EINVAL; /* get output voltage */ output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) - return; + if (output_uV <= 0) { + rdev_err(rdev, "invalid output voltage found\n"); + return -EINVAL; + } /* get input voltage */ input_uV = 0; @@ -682,8 +667,10 @@ static void drms_uA_update(struct regulator_dev *rdev) input_uV = regulator_get_voltage(rdev->supply); if (input_uV <= 0) input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) - return; + if (input_uV <= 0) { + rdev_err(rdev, "invalid input voltage found\n"); + return -EINVAL; + } /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) @@ -695,8 +682,17 @@ static void drms_uA_update(struct regulator_dev *rdev) /* check the new mode is allowed */ err = regulator_mode_constrain(rdev, &mode); - if (err == 0) - rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) { + rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", + current_uA, input_uV, output_uV); + return err; + } + + err = rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) + rdev_err(rdev, "failed to set optimum mode %x\n", mode); + + return err; } static int suspend_set_state(struct regulator_dev *rdev, @@ -3026,75 +3022,13 @@ EXPORT_SYMBOL_GPL(regulator_get_mode); int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) { struct regulator_dev *rdev = regulator->rdev; - struct regulator *consumer; - int ret, output_uV, input_uV = 0, total_uA_load = 0; - unsigned int mode; - - if (rdev->supply) - input_uV = regulator_get_voltage(rdev->supply); + int ret; mutex_lock(&rdev->mutex); - - /* - * first check to see if we can set modes at all, otherwise just - * tell the consumer everything is OK. - */ regulator->uA_load = uA_load; - ret = regulator_check_drms(rdev); - if (ret < 0) { - ret = 0; - goto out; - } - - if (!rdev->desc->ops->get_optimum_mode) - goto out; - - /* - * we can actually do this so any errors are indicators of - * potential real failure. - */ - ret = -EINVAL; - - if (!rdev->desc->ops->set_mode) - goto out; - - /* get output voltage */ - output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) { - rdev_err(rdev, "invalid output voltage found\n"); - goto out; - } - - /* No supply? Use constraint voltage */ - if (input_uV <= 0) - input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) { - rdev_err(rdev, "invalid input voltage found\n"); - goto out; - } - - /* calc total requested load for this regulator */ - list_for_each_entry(consumer, &rdev->consumer_list, list) - total_uA_load += consumer->uA_load; - - mode = rdev->desc->ops->get_optimum_mode(rdev, - input_uV, output_uV, - total_uA_load); - ret = regulator_mode_constrain(rdev, &mode); - if (ret < 0) { - rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", - total_uA_load, input_uV, output_uV); - goto out; - } - - ret = rdev->desc->ops->set_mode(rdev, mode); - if (ret < 0) { - rdev_err(rdev, "failed to set optimum mode %x\n", mode); - goto out; - } - ret = mode; -out: + ret = drms_uA_update(rdev); mutex_unlock(&rdev->mutex); + return ret; } EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); @@ -3436,126 +3370,136 @@ int regulator_mode_to_status(unsigned int mode) } EXPORT_SYMBOL_GPL(regulator_mode_to_status); +static struct attribute *regulator_dev_attrs[] = { + &dev_attr_name.attr, + &dev_attr_num_users.attr, + &dev_attr_type.attr, + &dev_attr_microvolts.attr, + &dev_attr_microamps.attr, + &dev_attr_opmode.attr, + &dev_attr_state.attr, + &dev_attr_status.attr, + &dev_attr_bypass.attr, + &dev_attr_requested_microamps.attr, + &dev_attr_min_microvolts.attr, + &dev_attr_max_microvolts.attr, + &dev_attr_min_microamps.attr, + &dev_attr_max_microamps.attr, + &dev_attr_suspend_standby_state.attr, + &dev_attr_suspend_mem_state.attr, + &dev_attr_suspend_disk_state.attr, + &dev_attr_suspend_standby_microvolts.attr, + &dev_attr_suspend_mem_microvolts.attr, + &dev_attr_suspend_disk_microvolts.attr, + &dev_attr_suspend_standby_mode.attr, + &dev_attr_suspend_mem_mode.attr, + &dev_attr_suspend_disk_mode.attr, + NULL +}; + /* * To avoid cluttering sysfs (and memory) with useless state, only * create attributes that can be meaningfully displayed. */ -static int add_regulator_attributes(struct regulator_dev *rdev) +static umode_t regulator_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) { - struct device *dev = &rdev->dev; + struct device *dev = kobj_to_dev(kobj); + struct regulator_dev *rdev = container_of(dev, struct regulator_dev, dev); const struct regulator_ops *ops = rdev->desc->ops; - int status = 0; + umode_t mode = attr->mode; + + /* these three are always present */ + if (attr == &dev_attr_name.attr || + attr == &dev_attr_num_users.attr || + attr == &dev_attr_type.attr) + return mode; /* some attributes need specific methods to be displayed */ - if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || - (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || - (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) || - (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1))) { - status = device_create_file(dev, &dev_attr_microvolts); - if (status < 0) - return status; - } - if (ops->get_current_limit) { - status = device_create_file(dev, &dev_attr_microamps); - if (status < 0) - return status; - } - if (ops->get_mode) { - status = device_create_file(dev, &dev_attr_opmode); - if (status < 0) - return status; - } - if (rdev->ena_pin || ops->is_enabled) { - status = device_create_file(dev, &dev_attr_state); - if (status < 0) - return status; - } - if (ops->get_status) { - status = device_create_file(dev, &dev_attr_status); - if (status < 0) - return status; - } - if (ops->get_bypass) { - status = device_create_file(dev, &dev_attr_bypass); - if (status < 0) - return status; + if (attr == &dev_attr_microvolts.attr) { + if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || + (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || + (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) || + (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1)) + return mode; + return 0; } + if (attr == &dev_attr_microamps.attr) + return ops->get_current_limit ? mode : 0; + + if (attr == &dev_attr_opmode.attr) + return ops->get_mode ? mode : 0; + + if (attr == &dev_attr_state.attr) + return (rdev->ena_pin || ops->is_enabled) ? mode : 0; + + if (attr == &dev_attr_status.attr) + return ops->get_status ? mode : 0; + + if (attr == &dev_attr_bypass.attr) + return ops->get_bypass ? mode : 0; + /* some attributes are type-specific */ - if (rdev->desc->type == REGULATOR_CURRENT) { - status = device_create_file(dev, &dev_attr_requested_microamps); - if (status < 0) - return status; - } + if (attr == &dev_attr_requested_microamps.attr) + return rdev->desc->type == REGULATOR_CURRENT ? mode : 0; /* all the other attributes exist to support constraints; * don't show them if there are no constraints, or if the * relevant supporting methods are missing. */ if (!rdev->constraints) - return status; + return 0; /* constraints need specific supporting methods */ - if (ops->set_voltage || ops->set_voltage_sel) { - status = device_create_file(dev, &dev_attr_min_microvolts); - if (status < 0) - return status; - status = device_create_file(dev, &dev_attr_max_microvolts); - if (status < 0) - return status; - } - if (ops->set_current_limit) { - status = device_create_file(dev, &dev_attr_min_microamps); - if (status < 0) - return status; - status = device_create_file(dev, &dev_attr_max_microamps); - if (status < 0) - return status; - } + if (attr == &dev_attr_min_microvolts.attr || + attr == &dev_attr_max_microvolts.attr) + return (ops->set_voltage || ops->set_voltage_sel) ? mode : 0; - status = device_create_file(dev, &dev_attr_suspend_standby_state); - if (status < 0) - return status; - status = device_create_file(dev, &dev_attr_suspend_mem_state); - if (status < 0) - return status; - status = device_create_file(dev, &dev_attr_suspend_disk_state); - if (status < 0) - return status; + if (attr == &dev_attr_min_microamps.attr || + attr == &dev_attr_max_microamps.attr) + return ops->set_current_limit ? mode : 0; - if (ops->set_suspend_voltage) { - status = device_create_file(dev, - &dev_attr_suspend_standby_microvolts); - if (status < 0) - return status; - status = device_create_file(dev, - &dev_attr_suspend_mem_microvolts); - if (status < 0) - return status; - status = device_create_file(dev, - &dev_attr_suspend_disk_microvolts); - if (status < 0) - return status; - } + if (attr == &dev_attr_suspend_standby_state.attr || + attr == &dev_attr_suspend_mem_state.attr || + attr == &dev_attr_suspend_disk_state.attr) + return mode; - if (ops->set_suspend_mode) { - status = device_create_file(dev, - &dev_attr_suspend_standby_mode); - if (status < 0) - return status; - status = device_create_file(dev, - &dev_attr_suspend_mem_mode); - if (status < 0) - return status; - status = device_create_file(dev, - &dev_attr_suspend_disk_mode); - if (status < 0) - return status; - } + if (attr == &dev_attr_suspend_standby_microvolts.attr || + attr == &dev_attr_suspend_mem_microvolts.attr || + attr == &dev_attr_suspend_disk_microvolts.attr) + return ops->set_suspend_voltage ? mode : 0; - return status; + if (attr == &dev_attr_suspend_standby_mode.attr || + attr == &dev_attr_suspend_mem_mode.attr || + attr == &dev_attr_suspend_disk_mode.attr) + return ops->set_suspend_mode ? mode : 0; + + return mode; } +static const struct attribute_group regulator_dev_group = { + .attrs = regulator_dev_attrs, + .is_visible = regulator_attr_is_visible, +}; + +static const struct attribute_group *regulator_dev_groups[] = { + ®ulator_dev_group, + NULL +}; + +static void regulator_dev_release(struct device *dev) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + kfree(rdev); +} + +static struct class regulator_class = { + .name = "regulator", + .dev_release = regulator_dev_release, + .dev_groups = regulator_dev_groups, +}; + static void rdev_init_debugfs(struct regulator_dev *rdev) { rdev->debugfs = debugfs_create_dir(rdev_get_name(rdev), debugfs_root); @@ -3575,7 +3519,7 @@ static void rdev_init_debugfs(struct regulator_dev *rdev) /** * regulator_register - register regulator * @regulator_desc: regulator to register - * @config: runtime configuration for regulator + * @cfg: runtime configuration for regulator * * Called by regulator drivers to register a regulator. * Returns a valid pointer to struct regulator_dev on success @@ -3583,20 +3527,21 @@ static void rdev_init_debugfs(struct regulator_dev *rdev) */ struct regulator_dev * regulator_register(const struct regulator_desc *regulator_desc, - const struct regulator_config *config) + const struct regulator_config *cfg) { const struct regulation_constraints *constraints = NULL; const struct regulator_init_data *init_data; - static atomic_t regulator_no = ATOMIC_INIT(0); + struct regulator_config *config = NULL; + static atomic_t regulator_no = ATOMIC_INIT(-1); struct regulator_dev *rdev; struct device *dev; int ret, i; const char *supply = NULL; - if (regulator_desc == NULL || config == NULL) + if (regulator_desc == NULL || cfg == NULL) return ERR_PTR(-EINVAL); - dev = config->dev; + dev = cfg->dev; WARN_ON(!dev); if (regulator_desc->name == NULL || regulator_desc->ops == NULL) @@ -3626,7 +3571,17 @@ regulator_register(const struct regulator_desc *regulator_desc, if (rdev == NULL) return ERR_PTR(-ENOMEM); - init_data = regulator_of_get_init_data(dev, regulator_desc, + /* + * Duplicate the config so the driver could override it after + * parsing init data. + */ + config = kmemdup(cfg, sizeof(*cfg), GFP_KERNEL); + if (config == NULL) { + kfree(rdev); + return ERR_PTR(-ENOMEM); + } + + init_data = regulator_of_get_init_data(dev, regulator_desc, config, &rdev->dev.of_node); if (!init_data) { init_data = config->init_data; @@ -3660,8 +3615,8 @@ regulator_register(const struct regulator_desc *regulator_desc, /* register with sysfs */ rdev->dev.class = ®ulator_class; rdev->dev.parent = dev; - dev_set_name(&rdev->dev, "regulator.%d", - atomic_inc_return(®ulator_no) - 1); + dev_set_name(&rdev->dev, "regulator.%lu", + (unsigned long) atomic_inc_return(®ulator_no)); ret = device_register(&rdev->dev); if (ret != 0) { put_device(&rdev->dev); @@ -3694,11 +3649,6 @@ regulator_register(const struct regulator_desc *regulator_desc, if (ret < 0) goto scrub; - /* add attributes supported by this regulator */ - ret = add_regulator_attributes(rdev); - if (ret < 0) - goto scrub; - if (init_data && init_data->supply_regulator) supply = init_data->supply_regulator; else if (regulator_desc->supply_name) @@ -3754,6 +3704,7 @@ add_dev: rdev_init_debugfs(rdev); out: mutex_unlock(®ulator_list_mutex); + kfree(config); return rdev; unset_supplies: diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index c78d2106d6cb..01343419555e 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include "da9211-regulator.h" @@ -276,7 +277,10 @@ static struct da9211_pdata *da9211_parse_regulators_dt( continue; pdata->init_data[n] = da9211_matches[i].init_data; - + pdata->reg_node[n] = da9211_matches[i].of_node; + pdata->gpio_ren[n] = + of_get_named_gpio(da9211_matches[i].of_node, + "enable-gpios", 0); n++; } @@ -364,7 +368,15 @@ static int da9211_regulator_init(struct da9211 *chip) config.dev = chip->dev; config.driver_data = chip; config.regmap = chip->regmap; - config.of_node = chip->dev->of_node; + config.of_node = chip->pdata->reg_node[i]; + + if (gpio_is_valid(chip->pdata->gpio_ren[i])) { + config.ena_gpio = chip->pdata->gpio_ren[i]; + config.ena_gpio_initialized = true; + } else { + config.ena_gpio = -EINVAL; + config.ena_gpio_initialized = false; + } chip->rdev[i] = devm_regulator_register(chip->dev, &da9211_regulators[i], &config); diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index 6c43ab2d5121..3c25db89a021 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -147,7 +147,7 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev) return REGULATOR_MODE_NORMAL; } -static int slew_rates[] = { +static const int slew_rates[] = { 64000, 32000, 16000, @@ -296,7 +296,7 @@ static int fan53555_regulator_register(struct fan53555_device_info *di, return PTR_ERR_OR_ZERO(di->rdev); } -static struct regmap_config fan53555_regmap_config = { +static const struct regmap_config fan53555_regmap_config = { .reg_bits = 8, .val_bits = 8, }; diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h index 80ba2a35a04b..c74ac8734023 100644 --- a/drivers/regulator/internal.h +++ b/drivers/regulator/internal.h @@ -38,11 +38,13 @@ struct regulator { #ifdef CONFIG_OF struct regulator_init_data *regulator_of_get_init_data(struct device *dev, const struct regulator_desc *desc, + struct regulator_config *config, struct device_node **node); #else static inline struct regulator_init_data * regulator_of_get_init_data(struct device *dev, const struct regulator_desc *desc, + struct regulator_config *config, struct device_node **node) { return NULL; diff --git a/drivers/regulator/isl9305.c b/drivers/regulator/isl9305.c index 92fefd98da58..6e3a15fe00f1 100644 --- a/drivers/regulator/isl9305.c +++ b/drivers/regulator/isl9305.c @@ -177,8 +177,10 @@ static int isl9305_i2c_probe(struct i2c_client *i2c, #ifdef CONFIG_OF static const struct of_device_id isl9305_dt_ids[] = { - { .compatible = "isl,isl9305" }, - { .compatible = "isl,isl9305h" }, + { .compatible = "isl,isl9305" }, /* for backward compat., don't use */ + { .compatible = "isil,isl9305" }, + { .compatible = "isl,isl9305h" }, /* for backward compat., don't use */ + { .compatible = "isil,isl9305h" }, {}, }; #endif diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 021d64d856bb..3de328ab41f3 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -106,7 +106,6 @@ struct lp872x { struct device *dev; enum lp872x_id chipid; struct lp872x_platform_data *pdata; - struct regulator_dev **regulators; int num_regulators; enum lp872x_dvs_state dvs_pin; int dvs_gpio; @@ -801,8 +800,6 @@ static int lp872x_regulator_register(struct lp872x *lp) dev_err(lp->dev, "regulator register err"); return PTR_ERR(rdev); } - - *(lp->regulators + i) = rdev; } return 0; @@ -906,7 +903,7 @@ static struct lp872x_platform_data static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) { struct lp872x *lp; - int ret, size, num_regulators; + int ret; const int lp872x_num_regulators[] = { [LP8720] = LP8720_NUM_REGULATORS, [LP8725] = LP8725_NUM_REGULATORS, @@ -918,38 +915,27 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL); if (!lp) - goto err_mem; + return -ENOMEM; - num_regulators = lp872x_num_regulators[id->driver_data]; - size = sizeof(struct regulator_dev *) * num_regulators; - - lp->regulators = devm_kzalloc(&cl->dev, size, GFP_KERNEL); - if (!lp->regulators) - goto err_mem; + lp->num_regulators = lp872x_num_regulators[id->driver_data]; lp->regmap = devm_regmap_init_i2c(cl, &lp872x_regmap_config); if (IS_ERR(lp->regmap)) { ret = PTR_ERR(lp->regmap); dev_err(&cl->dev, "regmap init i2c err: %d\n", ret); - goto err_dev; + return ret; } lp->dev = &cl->dev; lp->pdata = dev_get_platdata(&cl->dev); lp->chipid = id->driver_data; - lp->num_regulators = num_regulators; i2c_set_clientdata(cl, lp); ret = lp872x_config(lp); if (ret) - goto err_dev; + return ret; return lp872x_regulator_register(lp); - -err_mem: - return -ENOMEM; -err_dev: - return ret; } static const struct of_device_id lp872x_dt_ids[] = { diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c index bf9a44c5fdd2..b3678d289619 100644 --- a/drivers/regulator/max14577.c +++ b/drivers/regulator/max14577.c @@ -103,6 +103,8 @@ static struct regulator_ops max14577_charger_ops = { static const struct regulator_desc max14577_supported_regulators[] = { [MAX14577_SAFEOUT] = { .name = "SAFEOUT", + .of_match = of_match_ptr("SAFEOUT"), + .regulators_node = of_match_ptr("regulators"), .id = MAX14577_SAFEOUT, .ops = &max14577_safeout_ops, .type = REGULATOR_VOLTAGE, @@ -114,6 +116,8 @@ static const struct regulator_desc max14577_supported_regulators[] = { }, [MAX14577_CHARGER] = { .name = "CHARGER", + .of_match = of_match_ptr("CHARGER"), + .regulators_node = of_match_ptr("regulators"), .id = MAX14577_CHARGER, .ops = &max14577_charger_ops, .type = REGULATOR_CURRENT, @@ -137,6 +141,8 @@ static struct regulator_ops max77836_ldo_ops = { static const struct regulator_desc max77836_supported_regulators[] = { [MAX14577_SAFEOUT] = { .name = "SAFEOUT", + .of_match = of_match_ptr("SAFEOUT"), + .regulators_node = of_match_ptr("regulators"), .id = MAX14577_SAFEOUT, .ops = &max14577_safeout_ops, .type = REGULATOR_VOLTAGE, @@ -148,6 +154,8 @@ static const struct regulator_desc max77836_supported_regulators[] = { }, [MAX14577_CHARGER] = { .name = "CHARGER", + .of_match = of_match_ptr("CHARGER"), + .regulators_node = of_match_ptr("regulators"), .id = MAX14577_CHARGER, .ops = &max14577_charger_ops, .type = REGULATOR_CURRENT, @@ -157,6 +165,8 @@ static const struct regulator_desc max77836_supported_regulators[] = { }, [MAX77836_LDO1] = { .name = "LDO1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), .id = MAX77836_LDO1, .ops = &max77836_ldo_ops, .type = REGULATOR_VOLTAGE, @@ -171,6 +181,8 @@ static const struct regulator_desc max77836_supported_regulators[] = { }, [MAX77836_LDO2] = { .name = "LDO2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), .id = MAX77836_LDO2, .ops = &max77836_ldo_ops, .type = REGULATOR_VOLTAGE, @@ -198,43 +210,6 @@ static struct of_regulator_match max77836_regulator_matches[] = { { .name = "LDO2", }, }; -static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev, - enum maxim_device_type dev_type) -{ - int ret; - struct device_node *np; - struct of_regulator_match *regulator_matches; - unsigned int regulator_matches_size; - - np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators"); - if (!np) { - dev_err(&pdev->dev, "Failed to get child OF node for regulators\n"); - return -EINVAL; - } - - switch (dev_type) { - case MAXIM_DEVICE_TYPE_MAX77836: - regulator_matches = max77836_regulator_matches; - regulator_matches_size = ARRAY_SIZE(max77836_regulator_matches); - break; - case MAXIM_DEVICE_TYPE_MAX14577: - default: - regulator_matches = max14577_regulator_matches; - regulator_matches_size = ARRAY_SIZE(max14577_regulator_matches); - } - - ret = of_regulator_match(&pdev->dev, np, regulator_matches, - regulator_matches_size); - if (ret < 0) - dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); - else - ret = 0; - - of_node_put(np); - - return ret; -} - static inline struct regulator_init_data *match_init_data(int index, enum maxim_device_type dev_type) { @@ -261,11 +236,6 @@ static inline struct device_node *match_of_node(int index, } } #else /* CONFIG_OF */ -static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev, - enum maxim_device_type dev_type) -{ - return 0; -} static inline struct regulator_init_data *match_init_data(int index, enum maxim_device_type dev_type) { @@ -308,16 +278,12 @@ static int max14577_regulator_probe(struct platform_device *pdev) { struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent); struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev); - int i, ret; + int i, ret = 0; struct regulator_config config = {}; const struct regulator_desc *supported_regulators; unsigned int supported_regulators_size; enum maxim_device_type dev_type = max14577->dev_type; - ret = max14577_regulator_dt_parse_pdata(pdev, dev_type); - if (ret) - return ret; - switch (dev_type) { case MAXIM_DEVICE_TYPE_MAX77836: supported_regulators = max77836_supported_regulators; @@ -329,7 +295,7 @@ static int max14577_regulator_probe(struct platform_device *pdev) supported_regulators_size = ARRAY_SIZE(max14577_supported_regulators); } - config.dev = &pdev->dev; + config.dev = max14577->dev; config.driver_data = max14577; for (i = 0; i < supported_regulators_size; i++) { diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index 10d206266ac2..15fb1416bfbd 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -45,6 +46,11 @@ #define MAX77686_DVS_MINUV 600000 #define MAX77686_DVS_UVSTEP 12500 +/* + * Value for configuring buck[89] and LDO{20,21,22} as GPIO control. + * It is the same as 'off' for other regulators. + */ +#define MAX77686_GPIO_CONTROL 0x0 /* * Values used for configuring LDOs and bucks. * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26 @@ -82,6 +88,8 @@ enum max77686_ramp_rate { }; struct max77686_data { + u64 gpio_enabled:MAX77686_REGULATORS; + /* Array indexed by regulator id */ unsigned int opmode[MAX77686_REGULATORS]; }; @@ -100,6 +108,26 @@ static unsigned int max77686_get_opmode_shift(int id) } } +/* + * When regulator is configured for GPIO control then it + * replaces "normal" mode. Any change from low power mode to normal + * should actually change to GPIO control. + * Map normal mode to proper value for such regulators. + */ +static unsigned int max77686_map_normal_mode(struct max77686_data *max77686, + int id) +{ + switch (id) { + case MAX77686_BUCK8: + case MAX77686_BUCK9: + case MAX77686_LDO20 ... MAX77686_LDO22: + if (max77686->gpio_enabled & (1 << id)) + return MAX77686_GPIO_CONTROL; + } + + return MAX77686_NORMAL; +} + /* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */ static int max77686_set_suspend_disable(struct regulator_dev *rdev) { @@ -136,7 +164,7 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev, val = MAX77686_LDO_LOWPOWER_PWRREQ; break; case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ - val = MAX77686_NORMAL; + val = max77686_map_normal_mode(max77686, id); break; default: pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", @@ -160,7 +188,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, { unsigned int val; struct max77686_data *max77686 = rdev_get_drvdata(rdev); - int ret; + int ret, id = rdev_get_id(rdev); switch (mode) { case REGULATOR_MODE_STANDBY: /* switch off */ @@ -170,7 +198,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, val = MAX77686_LDO_LOWPOWER_PWRREQ; break; case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ - val = MAX77686_NORMAL; + val = max77686_map_normal_mode(max77686, id); break; default: pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", @@ -184,7 +212,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, if (ret) return ret; - max77686->opmode[rdev_get_id(rdev)] = val; + max77686->opmode[id] = val; return 0; } @@ -197,7 +225,7 @@ static int max77686_enable(struct regulator_dev *rdev) shift = max77686_get_opmode_shift(id); if (max77686->opmode[id] == MAX77686_OFF_PWRREQ) - max77686->opmode[id] = MAX77686_NORMAL; + max77686->opmode[id] = max77686_map_normal_mode(max77686, id); return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, @@ -229,6 +257,36 @@ static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) MAX77686_RAMP_RATE_MASK, ramp_value << 6); } +static int max77686_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct max77686_data *max77686 = config->driver_data; + + switch (desc->id) { + case MAX77686_BUCK8: + case MAX77686_BUCK9: + case MAX77686_LDO20 ... MAX77686_LDO22: + config->ena_gpio = of_get_named_gpio(np, + "maxim,ena-gpios", 0); + config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; + config->ena_gpio_initialized = true; + break; + default: + return 0; + } + + if (gpio_is_valid(config->ena_gpio)) { + max77686->gpio_enabled |= (1 << desc->id); + + return regmap_update_bits(config->regmap, desc->enable_reg, + desc->enable_mask, + MAX77686_GPIO_CONTROL); + } + + return 0; +} + static struct regulator_ops max77686_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, @@ -283,6 +341,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { .name = "LDO"#num, \ .of_match = of_match_ptr("LDO"#num), \ .regulators_node = of_match_ptr("voltage-regulators"), \ + .of_parse_cb = max77686_of_parse_cb, \ .id = MAX77686_LDO##num, \ .ops = &max77686_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -355,6 +414,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { .name = "BUCK"#num, \ .of_match = of_match_ptr("BUCK"#num), \ .regulators_node = of_match_ptr("voltage-regulators"), \ + .of_parse_cb = max77686_of_parse_cb, \ .id = MAX77686_BUCK##num, \ .ops = &max77686_ops, \ .type = REGULATOR_VOLTAGE, \ diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c new file mode 100644 index 000000000000..c132ef527cdd --- /dev/null +++ b/drivers/regulator/max77843.c @@ -0,0 +1,227 @@ +/* + * max77843.c - Regulator driver for the Maxim MAX77843 + * + * Copyright (C) 2015 Samsung Electronics + * Author: Jaewon Kim + * Author: Beomho Seo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +enum max77843_regulator_type { + MAX77843_SAFEOUT1 = 0, + MAX77843_SAFEOUT2, + MAX77843_CHARGER, + + MAX77843_NUM, +}; + +static const unsigned int max77843_safeout_voltage_table[] = { + 4850000, + 4900000, + 4950000, + 3300000, +}; + +static int max77843_reg_is_enabled(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev->regmap; + int ret; + unsigned int reg; + + ret = regmap_read(regmap, rdev->desc->enable_reg, ®); + if (ret) { + dev_err(&rdev->dev, "Fialed to read charger register\n"); + return ret; + } + + return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask; +} + +static int max77843_reg_get_current_limit(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev->regmap; + unsigned int chg_min_uA = rdev->constraints->min_uA; + unsigned int chg_max_uA = rdev->constraints->max_uA; + unsigned int val; + int ret; + unsigned int reg, sel; + + ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®); + if (ret) { + dev_err(&rdev->dev, "Failed to read charger register\n"); + return ret; + } + + sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK; + + if (sel < 0x03) + sel = 0; + else + sel -= 2; + + val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel; + if (val > chg_max_uA) + return -EINVAL; + + return val; +} + +static int max77843_reg_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct regmap *regmap = rdev->regmap; + unsigned int chg_min_uA = rdev->constraints->min_uA; + int sel = 0; + + while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA) + sel++; + + if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA) + return -EINVAL; + + sel += 2; + + return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel); +} + +static struct regulator_ops max77843_charger_ops = { + .is_enabled = max77843_reg_is_enabled, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_current_limit = max77843_reg_get_current_limit, + .set_current_limit = max77843_reg_set_current_limit, +}; + +static struct regulator_ops max77843_regulator_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_table, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static const struct regulator_desc max77843_supported_regulators[] = { + [MAX77843_SAFEOUT1] = { + .name = "SAFEOUT1", + .id = MAX77843_SAFEOUT1, + .ops = &max77843_regulator_ops, + .of_match = of_match_ptr("SAFEOUT1"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table), + .volt_table = max77843_safeout_voltage_table, + .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, + .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1, + .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, + .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK, + }, + [MAX77843_SAFEOUT2] = { + .name = "SAFEOUT2", + .id = MAX77843_SAFEOUT2, + .ops = &max77843_regulator_ops, + .of_match = of_match_ptr("SAFEOUT2"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table), + .volt_table = max77843_safeout_voltage_table, + .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, + .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2, + .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, + .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK, + }, + [MAX77843_CHARGER] = { + .name = "CHARGER", + .id = MAX77843_CHARGER, + .ops = &max77843_charger_ops, + .of_match = of_match_ptr("CHARGER"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_CURRENT, + .owner = THIS_MODULE, + .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00, + .enable_mask = MAX77843_CHG_MASK, + }, +}; + +static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id) +{ + switch (reg_id) { + case MAX77843_SAFEOUT1: + case MAX77843_SAFEOUT2: + return max77843->regmap; + case MAX77843_CHARGER: + return max77843->regmap_chg; + default: + return max77843->regmap; + } +} + +static int max77843_regulator_probe(struct platform_device *pdev) +{ + struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + int i; + + config.dev = max77843->dev; + config.driver_data = max77843; + + for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) { + struct regulator_dev *regulator; + + config.regmap = max77843_get_regmap(max77843, + max77843_supported_regulators[i].id); + + regulator = devm_regulator_register(&pdev->dev, + &max77843_supported_regulators[i], &config); + if (IS_ERR(regulator)) { + dev_err(&pdev->dev, + "Failed to regiser regulator-%d\n", i); + return PTR_ERR(regulator); + } + } + + return 0; +} + +static const struct platform_device_id max77843_regulator_id[] = { + { "max77843-regulator", }, + { /* sentinel */ }, +}; + +static struct platform_driver max77843_regulator_driver = { + .driver = { + .name = "max77843-regulator", + }, + .probe = max77843_regulator_probe, + .id_table = max77843_regulator_id, +}; + +static int __init max77843_regulator_init(void) +{ + return platform_driver_register(&max77843_regulator_driver); +} +subsys_initcall(max77843_regulator_init); + +static void __exit max77843_regulator_exit(void) +{ + platform_driver_unregister(&max77843_regulator_driver); +} +module_exit(max77843_regulator_exit); + +MODULE_AUTHOR("Jaewon Kim "); +MODULE_AUTHOR("Beomho Seo "); +MODULE_DESCRIPTION("Maxim MAX77843 regulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c index c8bddcc8f911..81229579ece9 100644 --- a/drivers/regulator/max8649.c +++ b/drivers/regulator/max8649.c @@ -115,7 +115,7 @@ static unsigned int max8649_get_mode(struct regulator_dev *rdev) return REGULATOR_MODE_NORMAL; } -static struct regulator_ops max8649_dcdc_ops = { +static const struct regulator_ops max8649_dcdc_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear, @@ -143,7 +143,7 @@ static struct regulator_desc dcdc_desc = { .enable_is_inverted = true, }; -static struct regmap_config max8649_regmap_config = { +static const struct regmap_config max8649_regmap_config = { .reg_bits = 8, .val_bits = 8, }; diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c new file mode 100644 index 000000000000..a5b2f4762677 --- /dev/null +++ b/drivers/regulator/mt6397-regulator.c @@ -0,0 +1,332 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Flora Fu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * MT6397 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6397_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; +}; + +#define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6397_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6397_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6397_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask) \ +[MT6397_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6397_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6397_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ +} + +#define MT6397_REG_FIXED(match, vreg, enreg, enbit, volt) \ +[MT6397_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6397_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6397_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000), +}; + +static const u32 ldo_volt_table1[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table2[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table3[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 1220000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table5_v2[] = { + 1200000, 1000000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000, +}; + +static int mt6397_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6397_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static struct regulator_ops mt6397_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6397_get_status, +}; + +static struct regulator_ops mt6397_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6397_get_status, +}; + +static struct regulator_ops mt6397_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6397_get_status, +}; + +/* The array is indexed by id(MT6397_ID_XXX) */ +static struct mt6397_regulator_info mt6397_regulators[] = { + MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f, + MT6397_VCA15_CON10, MT6397_VCA15_CON5), + MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f, + MT6397_VPCA7_CON10, MT6397_VPCA7_CON5), + MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9, + 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5), + MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9, + 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5), + MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f, + MT6397_VCORE_CON10, MT6397_VCORE_CON5), + MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1, + MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f, + MT6397_VGPU_CON10, MT6397_VGPU_CON5), + MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2, + MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f, + MT6397_VDRM_CON10, MT6397_VDRM_CON5), + MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000, + buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f, + MT6397_VIO18_CON10, MT6397_VIO18_CON5), + MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000), + MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000), + MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1, + MT6397_ANALDO_CON2, 15, MT6397_ANALDO_CON6, 0xC0), + MT6397_REG_FIXED("ldo_vio28", VIO28, MT6397_DIGLDO_CON0, 14, 2800000), + MT6397_REG_FIXED("ldo_vusb", VUSB, MT6397_DIGLDO_CON1, 14, 3300000), + MT6397_LDO("ldo_vmc", VMC, ldo_volt_table2, + MT6397_DIGLDO_CON2, 12, MT6397_DIGLDO_CON29, 0x10), + MT6397_LDO("ldo_vmch", VMCH, ldo_volt_table3, + MT6397_DIGLDO_CON3, 14, MT6397_DIGLDO_CON17, 0x80), + MT6397_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table3, + MT6397_DIGLDO_CON4, 14, MT6397_DIGLDO_CON18, 0x10), + MT6397_LDO("ldo_vgp1", VGP1, ldo_volt_table4, + MT6397_DIGLDO_CON5, 15, MT6397_DIGLDO_CON19, 0xE0), + MT6397_LDO("ldo_vgp2", VGP2, ldo_volt_table5, + MT6397_DIGLDO_CON6, 15, MT6397_DIGLDO_CON20, 0xE0), + MT6397_LDO("ldo_vgp3", VGP3, ldo_volt_table5, + MT6397_DIGLDO_CON7, 15, MT6397_DIGLDO_CON21, 0xE0), + MT6397_LDO("ldo_vgp4", VGP4, ldo_volt_table5, + MT6397_DIGLDO_CON8, 15, MT6397_DIGLDO_CON22, 0xE0), + MT6397_LDO("ldo_vgp5", VGP5, ldo_volt_table6, + MT6397_DIGLDO_CON9, 15, MT6397_DIGLDO_CON23, 0xE0), + MT6397_LDO("ldo_vgp6", VGP6, ldo_volt_table5, + MT6397_DIGLDO_CON10, 15, MT6397_DIGLDO_CON33, 0xE0), + MT6397_LDO("ldo_vibr", VIBR, ldo_volt_table7, + MT6397_DIGLDO_CON24, 15, MT6397_DIGLDO_CON25, 0xE00), +}; + +static int mt6397_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6397_MAX_REGULATOR; i++) { + if (mt6397_regulators[i].vselctrl_reg) { + if (regmap_read(mt6397->regmap, + mt6397_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6397_regulators[i].vselctrl_mask) { + mt6397_regulators[i].desc.vsel_reg = + mt6397_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6397_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value, version; + + /* Query buck controller to select activated voltage register part */ + if (mt6397_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6397->regmap, MT6397_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + version = (reg_value & 0xFF); + switch (version) { + case MT6397_REGULATOR_ID91: + mt6397_regulators[MT6397_ID_VGP2].desc.volt_table = + ldo_volt_table5_v2; + break; + default: + break; + } + + for (i = 0; i < MT6397_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6397_regulators[i]; + config.regmap = mt6397->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6397_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6397_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver mt6397_regulator_driver = { + .driver = { + .name = "mt6397-regulator", + }, + .probe = mt6397_regulator_probe, +}; + +module_platform_driver(mt6397_regulator_driver); + +MODULE_AUTHOR("Flora Fu "); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mt6397-regulator"); diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 91eaaf010524..24e812c48d93 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -270,6 +270,7 @@ EXPORT_SYMBOL_GPL(of_regulator_match); struct regulator_init_data *regulator_of_get_init_data(struct device *dev, const struct regulator_desc *desc, + struct regulator_config *config, struct device_node **node) { struct device_node *search, *child; @@ -307,6 +308,16 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev, break; } + if (desc->of_parse_cb) { + if (desc->of_parse_cb(child, desc, config)) { + dev_err(dev, + "driver callback failed to parse DT for regulator %s\n", + child->name); + init_data = NULL; + break; + } + } + of_node_get(child); *node = child; break; diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index c879dff597ee..8cc8d1877c44 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -56,7 +56,7 @@ #define PFUZE100_VGEN5VOL 0x70 #define PFUZE100_VGEN6VOL 0x71 -enum chips { PFUZE100, PFUZE200 }; +enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 }; struct pfuze_regulator { struct regulator_desc desc; @@ -80,9 +80,18 @@ static const int pfuze100_vsnvs[] = { 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, }; +static const int pfuze3000_sw2lo[] = { + 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, +}; + +static const int pfuze3000_sw2hi[] = { + 2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000, +}; + static const struct i2c_device_id pfuze_device_id[] = { {.name = "pfuze100", .driver_data = PFUZE100}, {.name = "pfuze200", .driver_data = PFUZE200}, + {.name = "pfuze3000", .driver_data = PFUZE3000}, { } }; MODULE_DEVICE_TABLE(i2c, pfuze_device_id); @@ -90,6 +99,7 @@ MODULE_DEVICE_TABLE(i2c, pfuze_device_id); static const struct of_device_id pfuze_dt_ids[] = { { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, + { .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000}, { } }; MODULE_DEVICE_TABLE(of, pfuze_dt_ids); @@ -219,6 +229,60 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ } +#define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_ldo_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base), \ + .vsel_mask = 0x3, \ + .enable_reg = (base), \ + .enable_mask = 0x10, \ + }, \ + .stby_reg = (base), \ + .stby_mask = 0x20, \ +} + + +#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name,\ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = 0x7, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = 0x7, \ +} + +#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name,\ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = 0xf, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = 0xf, \ +} + /* PFUZE100 */ static struct pfuze_regulator pfuze100_regulators[] = { PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), @@ -254,6 +318,22 @@ static struct pfuze_regulator pfuze200_regulators[] = { PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; +static struct pfuze_regulator pfuze3000_regulators[] = { + PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000), + PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), + PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), + PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), + PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), + PFUZE100_FIXED_REG(PFUZE3000, VREFDDR, PFUZE100_VREFDDRCON, 750000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), + PFUZE3000_VCC_REG(PFUZE3000, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000), + PFUZE3000_VCC_REG(PFUZE3000, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), +}; + static struct pfuze_regulator *pfuze_regulators; #ifdef CONFIG_OF @@ -294,6 +374,24 @@ static struct of_regulator_match pfuze200_matches[] = { { .name = "vgen6", }, }; +/* PFUZE3000 */ +static struct of_regulator_match pfuze3000_matches[] = { + + { .name = "sw1a", }, + { .name = "sw1b", }, + { .name = "sw2", }, + { .name = "sw3", }, + { .name = "swbst", }, + { .name = "vsnvs", }, + { .name = "vrefddr", }, + { .name = "vldo1", }, + { .name = "vldo2", }, + { .name = "vccsd", }, + { .name = "v33", }, + { .name = "vldo3", }, + { .name = "vldo4", }, +}; + static struct of_regulator_match *pfuze_matches; static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) @@ -313,6 +411,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) } switch (chip->chip_id) { + case PFUZE3000: + pfuze_matches = pfuze3000_matches; + ret = of_regulator_match(dev, parent, pfuze3000_matches, + ARRAY_SIZE(pfuze3000_matches)); + break; case PFUZE200: pfuze_matches = pfuze200_matches; ret = of_regulator_match(dev, parent, pfuze200_matches, @@ -378,7 +481,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) * as ID=8 in PFUZE100 */ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); - } else if ((value & 0x0f) != pfuze_chip->chip_id) { + } else if ((value & 0x0f) != pfuze_chip->chip_id && + (value & 0xf0) >> 4 != pfuze_chip->chip_id) { /* device id NOT match with your setting */ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); return -ENODEV; @@ -417,7 +521,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, int i, ret; const struct of_device_id *match; u32 regulator_num; - u32 sw_check_start, sw_check_end; + u32 sw_check_start, sw_check_end, sw_hi = 0x40; pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip), GFP_KERNEL); @@ -458,13 +562,19 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* use the right regulators after identify the right device */ switch (pfuze_chip->chip_id) { + case PFUZE3000: + pfuze_regulators = pfuze3000_regulators; + regulator_num = ARRAY_SIZE(pfuze3000_regulators); + sw_check_start = PFUZE3000_SW2; + sw_check_end = PFUZE3000_SW2; + sw_hi = 1 << 3; + break; case PFUZE200: pfuze_regulators = pfuze200_regulators; regulator_num = ARRAY_SIZE(pfuze200_regulators); sw_check_start = PFUZE200_SW2; sw_check_end = PFUZE200_SW3B; break; - case PFUZE100: default: pfuze_regulators = pfuze100_regulators; @@ -474,7 +584,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client, break; } dev_info(&client->dev, "pfuze%s found.\n", - (pfuze_chip->chip_id == PFUZE100) ? "100" : "200"); + (pfuze_chip->chip_id == PFUZE100) ? "100" : + ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000")); memcpy(pfuze_chip->regulator_descs, pfuze_regulators, sizeof(pfuze_chip->regulator_descs)); @@ -498,10 +609,15 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* SW2~SW4 high bit check and modify the voltage value table */ if (i >= sw_check_start && i <= sw_check_end) { regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); - if (val & 0x40) { - desc->min_uV = 800000; - desc->uV_step = 50000; - desc->n_voltages = 51; + if (val & sw_hi) { + if (pfuze_chip->chip_id == PFUZE3000) { + desc->volt_table = pfuze3000_sw2hi; + desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi); + } else { + desc->min_uV = 800000; + desc->uV_step = 50000; + desc->n_voltages = 51; + } } } diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index 8364ff331a81..e8647f7cf25e 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -227,9 +227,11 @@ static int rpm_reg_set_mV_sel(struct regulator_dev *rdev, return uV; mutex_lock(&vreg->lock); - vreg->uV = uV; if (vreg->is_enabled) - ret = rpm_reg_write(vreg, req, vreg->uV / 1000); + ret = rpm_reg_write(vreg, req, uV / 1000); + + if (!ret) + vreg->uV = uV; mutex_unlock(&vreg->lock); return ret; @@ -252,9 +254,11 @@ static int rpm_reg_set_uV_sel(struct regulator_dev *rdev, return uV; mutex_lock(&vreg->lock); - vreg->uV = uV; if (vreg->is_enabled) - ret = rpm_reg_write(vreg, req, vreg->uV); + ret = rpm_reg_write(vreg, req, uV); + + if (!ret) + vreg->uV = uV; mutex_unlock(&vreg->lock); return ret; @@ -674,6 +678,7 @@ static int rpm_reg_probe(struct platform_device *pdev) vreg->desc.owner = THIS_MODULE; vreg->desc.type = REGULATOR_VOLTAGE; vreg->desc.name = pdev->dev.of_node->name; + vreg->desc.supply_name = "vin"; vreg->rpm = dev_get_drvdata(pdev->dev.parent); if (!vreg->rpm) { @@ -768,7 +773,7 @@ static int rpm_reg_probe(struct platform_device *pdev) break; } - if (force_mode < 0) { + if (force_mode == -1) { dev_err(&pdev->dev, "invalid force mode\n"); return -EINVAL; } diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index c94a3e0f3b91..1f93b752a81c 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -97,7 +97,7 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) RK808_RAMP_RATE_MASK, ramp_value); } -int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv) +static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv) { unsigned int reg; int sel = regulator_map_voltage_linear_range(rdev, uv, uv); @@ -112,7 +112,7 @@ int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv) sel); } -int rk808_set_suspend_enable(struct regulator_dev *rdev) +static int rk808_set_suspend_enable(struct regulator_dev *rdev) { unsigned int reg; @@ -123,7 +123,7 @@ int rk808_set_suspend_enable(struct regulator_dev *rdev) 0); } -int rk808_set_suspend_disable(struct regulator_dev *rdev) +static int rk808_set_suspend_disable(struct regulator_dev *rdev) { unsigned int reg; diff --git a/drivers/regulator/rt5033-regulator.c b/drivers/regulator/rt5033-regulator.c index 870cc49438db..96d2c18e051a 100644 --- a/drivers/regulator/rt5033-regulator.c +++ b/drivers/regulator/rt5033-regulator.c @@ -36,6 +36,8 @@ static struct regulator_ops rt5033_buck_ops = { static const struct regulator_desc rt5033_supported_regulators[] = { [RT5033_BUCK] = { .name = "BUCK", + .of_match = of_match_ptr("BUCK"), + .regulators_node = of_match_ptr("regulators"), .id = RT5033_BUCK, .ops = &rt5033_buck_ops, .type = REGULATOR_VOLTAGE, @@ -50,6 +52,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = { }, [RT5033_LDO] = { .name = "LDO", + .of_match = of_match_ptr("LDO"), + .regulators_node = of_match_ptr("regulators"), .id = RT5033_LDO, .ops = &rt5033_buck_ops, .type = REGULATOR_VOLTAGE, @@ -64,6 +68,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = { }, [RT5033_SAFE_LDO] = { .name = "SAFE_LDO", + .of_match = of_match_ptr("SAFE_LDO"), + .regulators_node = of_match_ptr("regulators"), .id = RT5033_SAFE_LDO, .ops = &rt5033_safe_ldo_ops, .type = REGULATOR_VOLTAGE, @@ -81,7 +87,7 @@ static int rt5033_regulator_probe(struct platform_device *pdev) int ret, i; struct regulator_config config = {}; - config.dev = &pdev->dev; + config.dev = rt5033->dev; config.driver_data = rt5033; for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) { diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c index 7380af8bd50d..b941e564b3f3 100644 --- a/drivers/regulator/tps65023-regulator.c +++ b/drivers/regulator/tps65023-regulator.c @@ -173,7 +173,7 @@ static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev, } /* Operations permitted on VDCDCx */ -static struct regulator_ops tps65023_dcdc_ops = { +static const struct regulator_ops tps65023_dcdc_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -184,7 +184,7 @@ static struct regulator_ops tps65023_dcdc_ops = { }; /* Operations permitted on LDOx */ -static struct regulator_ops tps65023_ldo_ops = { +static const struct regulator_ops tps65023_ldo_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -194,7 +194,7 @@ static struct regulator_ops tps65023_ldo_ops = { .map_voltage = regulator_map_voltage_ascend, }; -static struct regmap_config tps65023_regmap_config = { +static const struct regmap_config tps65023_regmap_config = { .reg_bits = 8, .val_bits = 8, }; diff --git a/include/linux/regulator/da9211.h b/include/linux/regulator/da9211.h index 5479394fefce..5dd65acc2a69 100644 --- a/include/linux/regulator/da9211.h +++ b/include/linux/regulator/da9211.h @@ -32,6 +32,8 @@ struct da9211_pdata { * 2 : 2 phase 2 buck */ int num_buck; + int gpio_ren[DA9211_MAX_REGULATORS]; + struct device_node *reg_node[DA9211_MAX_REGULATORS]; struct regulator_init_data *init_data[DA9211_MAX_REGULATORS]; }; #endif diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 5f1e9ca47417..d4ad5b5a02bb 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -21,6 +21,7 @@ struct regmap; struct regulator_dev; +struct regulator_config; struct regulator_init_data; struct regulator_enable_gpio; @@ -205,6 +206,15 @@ enum regulator_type { * @supply_name: Identifying the regulator supply * @of_match: Name used to identify regulator in DT. * @regulators_node: Name of node containing regulator definitions in DT. + * @of_parse_cb: Optional callback called only if of_match is present. + * Will be called for each regulator parsed from DT, during + * init_data parsing. + * The regulator_config passed as argument to the callback will + * be a copy of config passed to regulator_register, valid only + * for this particular call. Callback may freely change the + * config but it cannot store it for later usage. + * Callback should return 0 on success or negative ERRNO + * indicating failure. * @id: Numerical identifier for the regulator. * @ops: Regulator operations table. * @irq: Interrupt number for the regulator. @@ -251,6 +261,9 @@ struct regulator_desc { const char *supply_name; const char *of_match; const char *regulators_node; + int (*of_parse_cb)(struct device_node *, + const struct regulator_desc *, + struct regulator_config *); int id; bool continuous_voltage_range; unsigned n_voltages; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 0b08d05d470b..b07562e082c4 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -191,15 +191,22 @@ struct regulator_init_data { void *driver_data; /* core does not touch this */ }; -int regulator_suspend_prepare(suspend_state_t state); -int regulator_suspend_finish(void); - #ifdef CONFIG_REGULATOR void regulator_has_full_constraints(void); +int regulator_suspend_prepare(suspend_state_t state); +int regulator_suspend_finish(void); #else static inline void regulator_has_full_constraints(void) { } +static inline int regulator_suspend_prepare(suspend_state_t state) +{ + return 0; +} +static inline int regulator_suspend_finish(void) +{ + return 0; +} #endif #endif diff --git a/include/linux/regulator/mt6397-regulator.h b/include/linux/regulator/mt6397-regulator.h new file mode 100644 index 000000000000..30cc5963e265 --- /dev/null +++ b/include/linux/regulator/mt6397-regulator.h @@ -0,0 +1,49 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Flora Fu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6397_H +#define __LINUX_REGULATOR_MT6397_H + +enum { + MT6397_ID_VPCA15 = 0, + MT6397_ID_VPCA7, + MT6397_ID_VSRAMCA15, + MT6397_ID_VSRAMCA7, + MT6397_ID_VCORE, + MT6397_ID_VGPU, + MT6397_ID_VDRM, + MT6397_ID_VIO18 = 7, + MT6397_ID_VTCXO, + MT6397_ID_VA28, + MT6397_ID_VCAMA, + MT6397_ID_VIO28, + MT6397_ID_VUSB, + MT6397_ID_VMC, + MT6397_ID_VMCH, + MT6397_ID_VEMC3V3, + MT6397_ID_VGP1, + MT6397_ID_VGP2, + MT6397_ID_VGP3, + MT6397_ID_VGP4, + MT6397_ID_VGP5, + MT6397_ID_VGP6, + MT6397_ID_VIBR, + MT6397_ID_RG_MAX, +}; + +#define MT6397_MAX_REGULATOR MT6397_ID_RG_MAX +#define MT6397_REGULATOR_ID97 0x97 +#define MT6397_REGULATOR_ID91 0x91 + +#endif /* __LINUX_REGULATOR_MT6397_H */ diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h index 364f7a7c43db..70c6c66c5bcf 100644 --- a/include/linux/regulator/pfuze100.h +++ b/include/linux/regulator/pfuze100.h @@ -49,6 +49,20 @@ #define PFUZE200_VGEN5 11 #define PFUZE200_VGEN6 12 +#define PFUZE3000_SW1A 0 +#define PFUZE3000_SW1B 1 +#define PFUZE3000_SW2 2 +#define PFUZE3000_SW3 3 +#define PFUZE3000_SWBST 4 +#define PFUZE3000_VSNVS 5 +#define PFUZE3000_VREFDDR 6 +#define PFUZE3000_VLDO1 7 +#define PFUZE3000_VLDO2 8 +#define PFUZE3000_VCCSD 9 +#define PFUZE3000_V33 10 +#define PFUZE3000_VLDO3 11 +#define PFUZE3000_VLDO4 12 + struct regulator_init_data; struct pfuze_regulator_platform_data {