diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt new file mode 100644 index 000000000000..dc7c9bad63ea --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt @@ -0,0 +1,23 @@ +i.mx6 Poweroff Driver + +SNVS_LPCR in SNVS module can power off the whole system by pull +PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC. +If you don't want to use PMIC_ON_REQ as power on/off control, +please set status='disabled' to disable this driver. + +Required Properties: +-compatible: "fsl,sec-v4.0-poweroff" +-reg: Specifies the physical address of the SNVS_LPCR register + +Example: + snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + ..... + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + }; + } diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index e688741c89aa..e6b0007355f8 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -97,6 +97,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y +CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 8fca6e276b69..6790f1b3f3a1 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -158,6 +158,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_I2C_IMX=y +CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 11b2957f792b..e8627e04e1e6 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -633,12 +633,41 @@ config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC select PINCTRL_VF610 - select VF_PIT_TIMER select PL310_ERRATA_769419 if CACHE_L2X0 help This enable support for Freescale Vybrid VF610 processor. +choice + prompt "Clocksource for scheduler clock" + depends on SOC_VF610 + default VF_USE_ARM_GLOBAL_TIMER + + config VF_USE_ARM_GLOBAL_TIMER + bool "Use ARM Global Timer" + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK + help + Use the ARM Global Timer as clocksource + + config VF_USE_PIT_TIMER + bool "Use PIT timer" + select VF_PIT_TIMER + help + Use SoC Periodic Interrupt Timer (PIT) as clocksource + +endchoice + +config SOC_LS1021A + bool "Freescale LS1021A support" + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select PCI_DOMAINS if PCI + select ZONE_DMA if ARM_LPAE + + help + This enable support for Freescale LS1021A processor. + endif source "arch/arm/mach-imx/devices/Kconfig" diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 6e4fcd8339cd..f5ac685a29fc 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci- obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o imx5-pm-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y) +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y) obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o \ @@ -89,7 +89,7 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -ifdef CONFIG_SOC_IMX6 +ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),) AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o @@ -110,4 +110,6 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o +obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o + obj-y += devices/ diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 8259a625a920..7f262fe4ba77 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -30,8 +30,11 @@ #define ANADIG_DIGPROG_IMX6SL 0x280 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 +#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8 #define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000 +/* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */ +#define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000 #define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000 @@ -56,16 +59,43 @@ static void imx_anatop_enable_fet_odrive(bool enable) BM_ANADIG_REG_CORE_FET_ODRIVE); } +static inline void imx_anatop_enable_2p5_pulldown(bool enable) +{ + regmap_write(anatop, ANADIG_REG_2P5 + (enable ? REG_SET : REG_CLR), + BM_ANADIG_REG_2P5_ENABLE_PULLDOWN); +} + +static inline void imx_anatop_disconnect_high_snvs(bool enable) +{ + regmap_write(anatop, ANADIG_ANA_MISC0 + (enable ? REG_SET : REG_CLR), + BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS); +} + void imx_anatop_pre_suspend(void) { - imx_anatop_enable_weak2p5(true); + if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2) + imx_anatop_enable_2p5_pulldown(true); + else + imx_anatop_enable_weak2p5(true); + imx_anatop_enable_fet_odrive(true); + + if (cpu_is_imx6sl()) + imx_anatop_disconnect_high_snvs(true); } void imx_anatop_post_resume(void) { + if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2) + imx_anatop_enable_2p5_pulldown(false); + else + imx_anatop_enable_weak2p5(false); + imx_anatop_enable_fet_odrive(false); - imx_anatop_enable_weak2p5(false); + + if (cpu_is_imx6sl()) + imx_anatop_disconnect_high_snvs(false); + } static void imx_anatop_usb_chrg_detect_disable(void) diff --git a/arch/arm/mach-imx/clk-cpu.c b/arch/arm/mach-imx/clk-cpu.c new file mode 100644 index 000000000000..aa1c345e2a19 --- /dev/null +++ b/arch/arm/mach-imx/clk-cpu.c @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2014 Lucas Stach , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include + +struct clk_cpu { + struct clk_hw hw; + struct clk *div; + struct clk *mux; + struct clk *pll; + struct clk *step; +}; + +static inline struct clk_cpu *to_clk_cpu(struct clk_hw *hw) +{ + return container_of(hw, struct clk_cpu, hw); +} + +static unsigned long clk_cpu_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_cpu *cpu = to_clk_cpu(hw); + + return clk_get_rate(cpu->div); +} + +static long clk_cpu_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_cpu *cpu = to_clk_cpu(hw); + + return clk_round_rate(cpu->pll, rate); +} + +static int clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_cpu *cpu = to_clk_cpu(hw); + int ret; + + /* switch to PLL bypass clock */ + ret = clk_set_parent(cpu->mux, cpu->step); + if (ret) + return ret; + + /* reprogram PLL */ + ret = clk_set_rate(cpu->pll, rate); + if (ret) { + clk_set_parent(cpu->mux, cpu->pll); + return ret; + } + /* switch back to PLL clock */ + clk_set_parent(cpu->mux, cpu->pll); + + /* Ensure the divider is what we expect */ + clk_set_rate(cpu->div, rate); + + return 0; +} + +static const struct clk_ops clk_cpu_ops = { + .recalc_rate = clk_cpu_recalc_rate, + .round_rate = clk_cpu_round_rate, + .set_rate = clk_cpu_set_rate, +}; + +struct clk *imx_clk_cpu(const char *name, const char *parent_name, + struct clk *div, struct clk *mux, struct clk *pll, + struct clk *step) +{ + struct clk_cpu *cpu; + struct clk *clk; + struct clk_init_data init; + + cpu = kzalloc(sizeof(*cpu), GFP_KERNEL); + if (!cpu) + return ERR_PTR(-ENOMEM); + + cpu->div = div; + cpu->mux = mux; + cpu->pll = pll; + cpu->step = step; + + init.name = name; + init.ops = &clk_cpu_ops; + init.flags = 0; + init.parent_names = &parent_name; + init.num_parents = 1; + + cpu->hw.init = &init; + + clk = clk_register(NULL, &cpu->hw); + if (IS_ERR(clk)) + kfree(cpu); + + return clk; +} diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 72d65214223e..0f7e536147cb 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -125,6 +125,8 @@ static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", }; static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", }; static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", }; +static const char *step_sels[] = { "lp_apm", }; +static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" }; static struct clk *clk[IMX5_CLK_END]; static struct clk_onecell_data clk_data; @@ -193,7 +195,9 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base) clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3); clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1, usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str)); - clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3); + clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels)); + clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels)); + clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3); clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3); clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30); clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6); @@ -537,6 +541,11 @@ static void __init mx53_clocks_init(struct device_node *np) clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24); clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2, mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel)); + clk[IMX5_CLK_ARM] = imx_clk_cpu("arm", "cpu_podf", + clk[IMX5_CLK_CPU_PODF], + clk[IMX5_CLK_CPU_PODF_SEL], + clk[IMX5_CLK_PLL1_SW], + clk[IMX5_CLK_STEP_SEL]); imx_check_clocks(clk, ARRAY_SIZE(clk)); @@ -551,6 +560,9 @@ static void __init mx53_clocks_init(struct device_node *np) /* move can bus clk to 24MHz */ clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]); + /* make sure step clock is running from 24MHz */ + clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]); + clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]); imx_print_silicon_rev("i.MX53", mx53_revision()); clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]); diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index a17818475050..5937ddee1a99 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -58,8 +58,14 @@ #define PFD_PLL1_BASE (anatop_base + 0x2b0) #define PFD_PLL2_BASE (anatop_base + 0x100) #define PFD_PLL3_BASE (anatop_base + 0xf0) +#define PLL1_CTRL (anatop_base + 0x270) +#define PLL2_CTRL (anatop_base + 0x30) #define PLL3_CTRL (anatop_base + 0x10) +#define PLL4_CTRL (anatop_base + 0x70) +#define PLL5_CTRL (anatop_base + 0xe0) +#define PLL6_CTRL (anatop_base + 0xa0) #define PLL7_CTRL (anatop_base + 0x20) +#define ANA_MISC1 (anatop_base + 0x160) static void __iomem *anatop_base; static void __iomem *ccm_base; @@ -67,25 +73,34 @@ static void __iomem *ccm_base; /* sources for multiplexer clocks, this is used multiple times */ static const char *fast_sels[] = { "firc", "fxosc", }; static const char *slow_sels[] = { "sirc_32k", "sxosc", }; -static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; -static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; -static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; +static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; +static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; +static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; +static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", }; static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; -static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; -static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", }; +static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", }; static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; -static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; -static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; -static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; +static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; +static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; +static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", }; static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; -static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; +static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", }; /* FTM counter clock source, not module clock */ static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; -static struct clk_div_table pll4_main_div_table[] = { + +static struct clk_div_table pll4_audio_div_table[] = { { .val = 0, .div = 1 }, { .val = 1, .div = 2 }, { .val = 2, .div = 6 }, @@ -105,6 +120,17 @@ static unsigned int const clks_init_on[] __initconst = { VF610_CLK_DDR_SEL, }; +static struct clk * __init vf610_get_fixed_clock( + struct device_node *ccm_node, const char *name) +{ + struct clk *clk = of_clk_get_by_name(ccm_node, name); + + /* Backward compatibility if device tree is missing clks assignments */ + if (IS_ERR(clk)) + clk = imx_obtain_fixed_clock(name, 0); + return clk; +}; + static void __init vf610_clocks_init(struct device_node *ccm_node) { struct device_node *np; @@ -115,10 +141,13 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000); clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000); - clk[VF610_CLK_SXOSC] = imx_obtain_fixed_clock("sxosc", 0); - clk[VF610_CLK_FXOSC] = imx_obtain_fixed_clock("fxosc", 0); - clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0); - clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0); + clk[VF610_CLK_SXOSC] = vf610_get_fixed_clock(ccm_node, "sxosc"); + clk[VF610_CLK_FXOSC] = vf610_get_fixed_clock(ccm_node, "fxosc"); + clk[VF610_CLK_AUDIO_EXT] = vf610_get_fixed_clock(ccm_node, "audio_ext"); + clk[VF610_CLK_ENET_EXT] = vf610_get_fixed_clock(ccm_node, "enet_ext"); + + /* Clock source from external clock via LVDs PAD */ + clk[VF610_CLK_ANACLK1] = vf610_get_fixed_clock(ccm_node, "anaclk1"); clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2); @@ -133,31 +162,63 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels)); clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels)); - clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1); - clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0); - clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1); - clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2); - clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3); + clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1); - clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0); - clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1); - clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2); - clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3); + clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1); + clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1); + clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1); + clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f); + clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3); + clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f); + clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1); - clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1); - clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0); - clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1); - clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2); - clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3); + clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); - clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1); - /* Enet pll: fixed 50Mhz */ - clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6); - /* pll6: default 960Mhz */ - clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1); - /* pll7: USB1 PLL at 480MHz */ - clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2); + /* Do not bypass PLLs initially */ + clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]); + clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]); + clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]); + clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]); + clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]); + clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]); + clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]); + + clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13); + clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13); + clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13); + clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13); + clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13); + clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13); + clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13); + + clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10)); + + clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0); + clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1); + clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2); + clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3); + + clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0); + clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1); + clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2); + clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3); + + clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0); + clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1); + clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2); + clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3); clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5); clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5); @@ -167,12 +228,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3); clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2); - clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1); - clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock); - clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1); + clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1); + clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock); + clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1); - clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6); - clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6); + clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6); + clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6); clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4)); clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4)); @@ -191,8 +252,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1); clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4)); - clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10); - clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20); + clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10); + clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20); clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4); clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 4cdf8b6a74e8..5ef82e2f8fc5 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -131,4 +131,8 @@ static inline struct clk *imx_clk_fixed_factor(const char *name, CLK_SET_RATE_PARENT, mult, div); } +struct clk *imx_clk_cpu(const char *name, const char *parent_name, + struct clk *div, struct clk *mux, struct clk *pll, + struct clk *step); + #endif diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 1dabf435c592..fe9a908da3ed 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -116,6 +116,7 @@ void imx_anatop_post_resume(void); int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); void imx6q_set_int_mem_clk_lpm(bool enable); void imx6sl_set_wait_clk(bool enter); +int imx_mmdc_get_ddr_type(void); void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); @@ -157,5 +158,6 @@ static inline void imx_init_l2cache(void) {} #endif extern struct smp_operations imx_smp_ops; +extern struct smp_operations ls1021a_smp_ops; #endif diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 03dd6ea13acc..7587cf0cba3e 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -41,6 +41,8 @@ static void __init imx53_dt_init(void) static void __init imx53_init_late(void) { imx53_pm_init(); + + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); } static const char * const imx53_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 3de3b7369aef..982224922fb1 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -8,12 +8,62 @@ #include #include +#include +#include +#include +#include #include #include #include "common.h" #include "cpuidle.h" +static int ar8031_phy_fixup(struct phy_device *dev) +{ + u16 val; + + /* Set RGMII IO voltage to 1.8V */ + phy_write(dev, 0x1d, 0x1f); + phy_write(dev, 0x1e, 0x8); + + /* introduce tx clock delay */ + phy_write(dev, 0x1d, 0x5); + val = phy_read(dev, 0x1e); + val |= 0x0100; + phy_write(dev, 0x1e, val); + + return 0; +} + +#define PHY_ID_AR8031 0x004dd074 +static void __init imx6sx_enet_phy_init(void) +{ + if (IS_BUILTIN(CONFIG_PHYLIB)) + phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, + ar8031_phy_fixup); +} + +static void __init imx6sx_enet_clk_sel(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0); + } else { + pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n"); + } +} + +static inline void imx6sx_enet_init(void) +{ + imx6sx_enet_phy_init(); + imx6sx_enet_clk_sel(); +} + static void __init imx6sx_init_machine(void) { struct device *parent; @@ -26,6 +76,7 @@ static void __init imx6sx_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + imx6sx_enet_init(); imx_anatop_init(); imx6sx_pm_init(); } diff --git a/arch/arm/mach-imx/mach-ls1021a.c b/arch/arm/mach-imx/mach-ls1021a.c new file mode 100644 index 000000000000..b89c858ebfd6 --- /dev/null +++ b/arch/arm/mach-imx/mach-ls1021a.c @@ -0,0 +1,22 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +#include "common.h" + +static const char * const ls1021a_dt_compat[] __initconst = { + "fsl,ls1021a", + NULL, +}; + +DT_MACHINE_START(LS1021A, "Freescale LS1021A") + .smp = smp_ops(ls1021a_smp_ops), + .dt_compat = ls1021a_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 7a9686ad994c..3729d90cfa46 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -21,6 +21,12 @@ #define BP_MMDC_MAPSR_PSD 0 #define BP_MMDC_MAPSR_PSS 4 +#define MMDC_MDMISC 0x18 +#define BM_MMDC_MDMISC_DDR_TYPE 0x18 +#define BP_MMDC_MDMISC_DDR_TYPE 0x3 + +static int ddr_type; + static int imx_mmdc_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -31,6 +37,12 @@ static int imx_mmdc_probe(struct platform_device *pdev) mmdc_base = of_iomap(np, 0); WARN_ON(!mmdc_base); + reg = mmdc_base + MMDC_MDMISC; + /* Get ddr type */ + val = readl_relaxed(reg); + ddr_type = (val & BM_MMDC_MDMISC_DDR_TYPE) >> + BP_MMDC_MDMISC_DDR_TYPE; + reg = mmdc_base + MMDC_MAPSR; /* Enable automatic power saving */ @@ -51,6 +63,11 @@ static int imx_mmdc_probe(struct platform_device *pdev) return 0; } +int imx_mmdc_get_ddr_type(void) +{ + return ddr_type; +} + static struct of_device_id imx_mmdc_dt_ids[] = { { .compatible = "fsl,imx6q-mmdc", }, { /* sentinel */ } diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 17a41ca65acf..4c1343df2ba4 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -55,6 +55,8 @@ #define IMX_CHIP_REVISION_3_3 0x33 #define IMX_CHIP_REVISION_UNKNOWN 0xff +#define IMX_DDR_TYPE_LPDDR2 1 + #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 771bd25c1025..7f270015fe58 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -11,7 +11,10 @@ */ #include +#include +#include #include + #include #include #include @@ -94,3 +97,33 @@ struct smp_operations imx_smp_ops __initdata = { .cpu_kill = imx_cpu_kill, #endif }; + +#define DCFG_CCSR_SCRATCHRW1 0x200 + +static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np; + void __iomem *dcfg_base; + unsigned long paddr; + + np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg"); + dcfg_base = of_iomap(np, 0); + BUG_ON(!dcfg_base); + + paddr = virt_to_phys(secondary_startup); + writel_relaxed(cpu_to_be32(paddr), dcfg_base + DCFG_CCSR_SCRATCHRW1); + + iounmap(dcfg_base); +} + +struct smp_operations ls1021a_smp_ops __initdata = { + .smp_prepare_cpus = ls1021a_smp_prepare_cpus, + .smp_boot_secondary = ls1021a_boot_secondary, +}; diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 5c3af8f993d0..c653dd4c9103 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -88,7 +88,7 @@ struct imx6_pm_base { }; struct imx6_pm_socdata { - u32 cpu_type; + u32 ddr_type; const char *mmdc_compat; const char *src_compat; const char *iomuxc_compat; @@ -138,7 +138,6 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = { }; static const struct imx6_pm_socdata imx6q_pm_data __initconst = { - .cpu_type = MXC_CPU_IMX6Q, .mmdc_compat = "fsl,imx6q-mmdc", .src_compat = "fsl,imx6q-src", .iomuxc_compat = "fsl,imx6q-iomuxc", @@ -148,7 +147,6 @@ static const struct imx6_pm_socdata imx6q_pm_data __initconst = { }; static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { - .cpu_type = MXC_CPU_IMX6DL, .mmdc_compat = "fsl,imx6q-mmdc", .src_compat = "fsl,imx6q-src", .iomuxc_compat = "fsl,imx6dl-iomuxc", @@ -158,7 +156,6 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { }; static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { - .cpu_type = MXC_CPU_IMX6SL, .mmdc_compat = "fsl,imx6sl-mmdc", .src_compat = "fsl,imx6sl-src", .iomuxc_compat = "fsl,imx6sl-iomuxc", @@ -168,7 +165,6 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { }; static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { - .cpu_type = MXC_CPU_IMX6SX, .mmdc_compat = "fsl,imx6sx-mmdc", .src_compat = "fsl,imx6sx-src", .iomuxc_compat = "fsl,imx6sx-iomuxc", @@ -187,7 +183,7 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { struct imx6_cpu_pm_info { phys_addr_t pbase; /* The physical address of pm_info. */ phys_addr_t resume_addr; /* The physical resume address for asm code */ - u32 cpu_type; + u32 ddr_type; u32 pm_info_size; /* Size of pm_info. */ struct imx6_pm_base mmdc_base; struct imx6_pm_base src_base; @@ -522,7 +518,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) goto pl310_cache_map_failed; } - pm_info->cpu_type = socdata->cpu_type; + pm_info->ddr_type = imx_mmdc_get_ddr_type(); pm_info->mmdc_io_num = socdata->mmdc_io_num; mmdc_offset_array = socdata->mmdc_io_offset; diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index ca4ea2daf25b..b99987b023fa 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -45,7 +45,7 @@ */ #define PM_INFO_PBASE_OFFSET 0x0 #define PM_INFO_RESUME_ADDR_OFFSET 0x4 -#define PM_INFO_CPU_TYPE_OFFSET 0x8 +#define PM_INFO_DDR_TYPE_OFFSET 0x8 #define PM_INFO_PM_INFO_SIZE_OFFSET 0xC #define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10 #define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14 @@ -110,7 +110,7 @@ ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET] - cmp r3, #MXC_CPU_IMX6SL + cmp r3, #IMX_DDR_TYPE_LPDDR2 bne 4f /* reset read FIFO, RST_RD_FIFO */ @@ -151,7 +151,7 @@ ENTRY(imx6_suspend) ldr r1, [r0, #PM_INFO_PBASE_OFFSET] ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET] - ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET] ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET] /* @@ -209,8 +209,8 @@ poll_dvfs_set: ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET add r8, r8, r0 - /* i.MX6SL's last 3 IOs need special setting */ - cmp r3, #MXC_CPU_IMX6SL + /* LPDDR2's last 3 IOs need special setting */ + cmp r3, #IMX_DDR_TYPE_LPDDR2 subeq r7, r7, #0x3 set_mmdc_io_lpm: ldr r9, [r8], #0x8 @@ -218,7 +218,7 @@ set_mmdc_io_lpm: subs r7, r7, #0x1 bne set_mmdc_io_lpm - cmp r3, #MXC_CPU_IMX6SL + cmp r3, #IMX_DDR_TYPE_LPDDR2 bne set_mmdc_io_lpm_done ldr r6, =0x1000 ldr r9, [r8], #0x8 @@ -324,7 +324,7 @@ resume: str r7, [r11, #MX6Q_SRC_GPR1] str r7, [r11, #MX6Q_SRC_GPR2] - ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET] mov r5, #0x1 resume_mmdc diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index f65ff49bb275..028e76504519 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -71,6 +71,15 @@ config POWER_RESET_HISI help Reboot support for Hisilicon boards. +config POWER_RESET_IMX + bool "IMX6 power-off driver" + depends on POWER_RESET && SOC_IMX6 + help + This driver support power off external PMIC by PMIC_ON_REQ on i.mx6 + boards.If you want to use other pin to control external power,please + say N here or disable in dts to make sure pm_power_off never be + overwrote wrongly by this driver. + config POWER_RESET_MSM bool "Qualcomm MSM power-off driver" depends on ARCH_QCOM diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 76ce1c59469b..1d4804d6b323 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o +obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c new file mode 100644 index 000000000000..ad6ce5020ea7 --- /dev/null +++ b/drivers/power/reset/imx-snvs-poweroff.c @@ -0,0 +1,66 @@ +/* Power off driver for i.mx6 + * Copyright (c) 2014, FREESCALE CORPORATION. All rights reserved. + * + * based on msm-poweroff.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static void __iomem *snvs_base; + +static void do_imx_poweroff(void) +{ + u32 value = readl(snvs_base); + + /* set TOP and DP_EN bit */ + writel(value | 0x60, snvs_base); +} + +static int imx_poweroff_probe(struct platform_device *pdev) +{ + snvs_base = of_iomap(pdev->dev.of_node, 0); + if (!snvs_base) { + dev_err(&pdev->dev, "failed to get memory\n"); + return -ENODEV; + } + + pm_power_off = do_imx_poweroff; + return 0; +} + +static const struct of_device_id of_imx_poweroff_match[] = { + { .compatible = "fsl,sec-v4.0-poweroff", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_imx_poweroff_match); + +static struct platform_driver imx_poweroff_driver = { + .probe = imx_poweroff_probe, + .driver = { + .name = "imx-snvs-poweroff", + .of_match_table = of_match_ptr(of_imx_poweroff_match), + }, +}; + +static int __init imx_poweroff_init(void) +{ + return platform_driver_register(&imx_poweroff_driver); +} +device_initcall(imx_poweroff_init); diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h index 5f2667ecd98e..f4b7478e23c8 100644 --- a/include/dt-bindings/clock/imx5-clock.h +++ b/include/dt-bindings/clock/imx5-clock.h @@ -198,6 +198,9 @@ #define IMX5_CLK_OCRAM 186 #define IMX5_CLK_SAHARA_IPG_GATE 187 #define IMX5_CLK_SATA_REF 188 -#define IMX5_CLK_END 189 +#define IMX5_CLK_STEP_SEL 189 +#define IMX5_CLK_CPU_PODF_SEL 190 +#define IMX5_CLK_ARM 191 +#define IMX5_CLK_END 192 #endif /* __DT_BINDINGS_CLOCK_IMX5_H */ diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h index d6b56b21539b..801c0ac50c47 100644 --- a/include/dt-bindings/clock/vf610-clock.h +++ b/include/dt-bindings/clock/vf610-clock.h @@ -21,24 +21,24 @@ #define VF610_CLK_FASK_CLK_SEL 8 #define VF610_CLK_AUDIO_EXT 9 #define VF610_CLK_ENET_EXT 10 -#define VF610_CLK_PLL1_MAIN 11 +#define VF610_CLK_PLL1_SYS 11 #define VF610_CLK_PLL1_PFD1 12 #define VF610_CLK_PLL1_PFD2 13 #define VF610_CLK_PLL1_PFD3 14 #define VF610_CLK_PLL1_PFD4 15 -#define VF610_CLK_PLL2_MAIN 16 +#define VF610_CLK_PLL2_BUS 16 #define VF610_CLK_PLL2_PFD1 17 #define VF610_CLK_PLL2_PFD2 18 #define VF610_CLK_PLL2_PFD3 19 #define VF610_CLK_PLL2_PFD4 20 -#define VF610_CLK_PLL3_MAIN 21 +#define VF610_CLK_PLL3_USB_OTG 21 #define VF610_CLK_PLL3_PFD1 22 #define VF610_CLK_PLL3_PFD2 23 #define VF610_CLK_PLL3_PFD3 24 #define VF610_CLK_PLL3_PFD4 25 -#define VF610_CLK_PLL4_MAIN 26 -#define VF610_CLK_PLL5_MAIN 27 -#define VF610_CLK_PLL6_MAIN 28 +#define VF610_CLK_PLL4_AUDIO 26 +#define VF610_CLK_PLL5_ENET 27 +#define VF610_CLK_PLL6_VIDEO 28 #define VF610_CLK_PLL3_MAIN_DIV 29 #define VF610_CLK_PLL4_MAIN_DIV 30 #define VF610_CLK_PLL6_MAIN_DIV 31 @@ -166,9 +166,32 @@ #define VF610_CLK_DMAMUX3 153 #define VF610_CLK_FLEXCAN0_EN 154 #define VF610_CLK_FLEXCAN1_EN 155 -#define VF610_CLK_PLL7_MAIN 156 +#define VF610_CLK_PLL7_USB_HOST 156 #define VF610_CLK_USBPHY0 157 #define VF610_CLK_USBPHY1 158 -#define VF610_CLK_END 159 +#define VF610_CLK_LVDS1_IN 159 +#define VF610_CLK_ANACLK1 160 +#define VF610_CLK_PLL1_BYPASS_SRC 161 +#define VF610_CLK_PLL2_BYPASS_SRC 162 +#define VF610_CLK_PLL3_BYPASS_SRC 163 +#define VF610_CLK_PLL4_BYPASS_SRC 164 +#define VF610_CLK_PLL5_BYPASS_SRC 165 +#define VF610_CLK_PLL6_BYPASS_SRC 166 +#define VF610_CLK_PLL7_BYPASS_SRC 167 +#define VF610_CLK_PLL1 168 +#define VF610_CLK_PLL2 169 +#define VF610_CLK_PLL3 170 +#define VF610_CLK_PLL4 171 +#define VF610_CLK_PLL5 172 +#define VF610_CLK_PLL6 173 +#define VF610_CLK_PLL7 174 +#define VF610_PLL1_BYPASS 175 +#define VF610_PLL2_BYPASS 176 +#define VF610_PLL3_BYPASS 177 +#define VF610_PLL4_BYPASS 178 +#define VF610_PLL5_BYPASS 179 +#define VF610_PLL6_BYPASS 180 +#define VF610_PLL7_BYPASS 181 +#define VF610_CLK_END 182 #endif /* __DT_BINDINGS_CLOCK_VF610_H */ diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index ff44374a1a4e..c877cad61a13 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -395,4 +395,43 @@ #define IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17) #define IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14) +/* For imx6sx iomux gpr register field define */ +#define IMX6SX_GPR1_VDEC_SW_RST_MASK (0x1 << 20) +#define IMX6SX_GPR1_VDEC_SW_RST_RESET (0x1 << 20) +#define IMX6SX_GPR1_VDEC_SW_RST_RELEASE (0x0 << 20) +#define IMX6SX_GPR1_VADC_SW_RST_MASK (0x1 << 19) +#define IMX6SX_GPR1_VADC_SW_RST_RESET (0x1 << 19) +#define IMX6SX_GPR1_VADC_SW_RST_RELEASE (0x0 << 19) +#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK (0x3 << 13) +#define IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK (0x3 << 17) +#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_EXT (0x3 << 13) + +#define IMX6SX_GPR4_FEC_ENET1_STOP_REQ (0x1 << 3) +#define IMX6SX_GPR4_FEC_ENET2_STOP_REQ (0x1 << 4) + +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_MASK (0x1 << 3) +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF1 (0x0 << 3) +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF2 (0x1 << 3) + +#define IMX6SX_GPR5_CSI2_MUX_CTRL_MASK (0x3 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_EXT_PIN (0x0 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_CVD (0x1 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_VDAC_TO_CSI (0x2 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_GND (0x3 << 27) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_MASK (0x1 << 26) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_ENABLE (0x1 << 26) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_DISABLE (0x0 << 26) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_MASK (0x3 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_EXT_PIN (0x0 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_CVD (0x1 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_VDAC_TO_CSI (0x2 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_GND (0x3 << 4) + +#define IMX6SX_GPR5_DISP_MUX_DCIC2_LCDIF2 (0x0 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC2_LVDS (0x1 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC2_MASK (0x1 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_LCDIF1 (0x0 << 1) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS (0x1 << 1) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1) + #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */