redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

Second batch of DT changes for 4.2:

Browse source 
- sama5d4: more peripherals: usarts, uarts, spi, pioD access
 - sama5d3: phy address for gmac
 - change NFC register map
 - regulator additions for the sd/mmc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJVWz7TAAoJEAf03oE53VmQsP0IAJam4gwzHfmP+0wewTkyc3Bt
 3MLvjZlCWebt0V3UL6UriYlfee8ntk5H8Mh1GcY9DyTBG834afrmAKAtFctmGcf7
 vHyqXBBkB6o30rqYUgz7QKs9+4aY0hr3V9w5pgJhbpshYhsD2+bg18kOMpUoFsaI
 5qeUIU0Wt0DDTlUAhg95rUmpnEcoIZHHZEhBsc1pDYqfOTlLawPJhbY1gcr6W0Z/
 KHEHNqNsQxsc5xN0lhfZd2F3gBK0Jm8AahMm99LShbb4eiash6iuxrm5rGxhr1bp
 rJLJzzsh9cSkLZeVADddjIZzsvOs3AWueQlEWJwW2JyLzlib+aWiZ4InWQymeBQ=
 =oPRO
 -----END PGP SIGNATURE-----

Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "Second batch of DT changes for 4.2:" from Nicolas Ferre:
- sama5d4: more peripherals: usarts, uarts, spi, pioD access
- sama5d3: phy address for gmac
- change NFC register map
- regulator additions for the sd/mmc

* tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sama5d4 xplained: add regulators for v(q)mmc1 supplies
  ARM: at91/dt: sama5d3 xplained: add fixed regulator for vmmc0
  ARM: at91/dt: sama5d3 xplained: add mmc0 vqmmc entry
  ARM: at91/dt: sama5d3 xplained: fill in mmc1 and set it to disabled
  ARM: at91/dt: sama5: reduce the NFC command register map
  ARM: at91/dt: sama5d4: update pinctrl ranges
  ARM: at91/dt: sama5d3 xplained: add phy address for macb0
  ARM: at91/dt: sama5d4 xplained: add spi1 on j14 connector
  ARM: at91/dt: sama5d4: add spi1, spi2 dt nodes
  ARM: at91/dt: sama5d4: add uart0, uart1 dt nodes
  ARM: at91/dt: sama5d4: add usart0, usart1 dt nodes
This commit is contained in:
Arnd Bergmann 2015-05-20 17:38:02 +02:00
parent 7dfc635894 8d545f32bd
commit 378bda66b9
4 changed files with 240 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

27
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View file

@ -35,6 +35,8 @@
apb {
mmc0: mmc@f0000000 {
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
vmmc-supply = <&vcc_mmc0_reg>;
vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
@ -43,6 +45,17 @@
};
};
mmc1: mmc@f8000000 {
vmmc-supply = <&vcc_3v3_reg>;
vqmmc-supply = <&vcc_3v3_reg>;
status = "disabled";
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
};
};
spi0: spi@f0004000 {
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
@ -105,7 +118,13 @@
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ethernet-phy@7 {
reg = <0x7>;
};
};
pwm0: pwm@f002c000 {
@ -278,6 +297,14 @@
};
};
vcc_mmc0_reg: fixedregulator@0 {
compatible = "regulator-fixed";
gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
regulator-name = "mmc0-card-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
gpio_keys {
compatible = "gpio-keys";

25
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View file

@ -106,6 +106,8 @@
mmc1: mmc@fc000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
vmmc-supply = <&vcc_mmc1_reg>;
vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
@ -122,6 +124,11 @@
status = "okay";
};
spi1: spi@fc018000 {
cs-gpios = <&pioB 21 0>;
status = "okay";
};
adc0: adc@fc034000 {
atmel,adc-vref = <3300>;
status = "okay";
@ -238,4 +245,22 @@
linux,default-trigger = "heartbeat";
};
};
vcc_3v3_reg: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "VCC 3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vcc_mmc1_reg: fixedregulator@1 {
compatible = "regulator-fixed";
gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
regulator-name = "VDD MCI1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_reg>;
};
};

2
arch/arm/boot/dts/sama5d3.dtsi
View file

@ -1478,7 +1478,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <
0x70000000 0x10000000 /* NFC Command Registers */
0x70000000 0x08000000 /* NFC Command Registers */
0xffffc000 0x00000070 /* NFC HSMC regs */
0x00200000 0x00100000 /* NFC SRAM banks */
>;

189
arch/arm/boot/dts/sama5d4.dtsi
View file

@ -59,6 +59,10 @@
serial0 = &usart3;
serial1 = &usart4;
serial2 = &usart2;
serial3 = &usart0;
serial4 = &usart1;
serial5 = &uart0;
serial6 = &uart1;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
@ -299,7 +303,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <
0x90000000 0x10000000 /* NFC Command Registers */
0x90000000 0x08000000 /* NFC Command Registers */
0xfc05c000 0x00000070 /* NFC HSMC regs */
0x00100000 0x00100000 /* NFC SRAM banks */
>;
@ -847,6 +851,24 @@
clock-names = "mci_clk";
};
uart0: serial@f8004000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8004000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
dmas = <&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(22))>,
<&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(23))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart0_clk>;
clock-names = "usart";
status = "disabled";
};
ssc0: ssc@f8008000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf8008000 0x4000>;
@ -977,6 +999,42 @@
reg = <0xf8028000 0x60>;
};
usart0: serial@f802c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf802c000 0x100>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(36))>,
<&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(37))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
clocks = <&usart0_clk>;
clock-names = "usart";
status = "disabled";
};
usart1: serial@f8030000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8030000 0x100>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(38))>,
<&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(39))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
clocks = <&usart1_clk>;
clock-names = "usart";
status = "disabled";
};
mmc1: mmc@fc000000 {
compatible = "atmel,hsmci";
reg = <0xfc000000 0x600>;
@ -994,6 +1052,24 @@
clock-names = "mci_clk";
};
uart1: serial@fc004000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfc004000 0x100>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
dmas = <&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(24))>,
<&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(25))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart1_clk>;
clock-names = "usart";
status = "disabled";
};
usart2: serial@fc008000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfc008000 0x100>;
@ -1066,6 +1142,46 @@
status = "disabled";
};
spi1: spi@fc018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfc018000 0x100>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
dmas = <&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(12))>,
<&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(13))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&spi1_clk>;
clock-names = "spi_clk";
status = "disabled";
};
spi2: spi@fc01c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfc01c000 0x100>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
dmas = <&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(14))>,
<&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(15))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
clocks = <&spi2_clk>;
clock-names = "spi_clk";
status = "disabled";
};
tcb1: timer@fc020000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xfc020000 0x100>;
@ -1232,7 +1348,8 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfc06a000 0xfc06a000 0x4000>;
ranges = <0xfc068000 0xfc068000 0x100
0xfc06a000 0xfc06a000 0x4000>;
/* WARNING: revisit as pin spec has changed */
atmel,mux-mask = <
/* A B C */
@ -1623,6 +1740,74 @@
};
};
spi1 {
pinctrl_spi1: spi1-0 {
atmel,pins =
<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */
AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */
AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */
>;
};
};
spi2 {
pinctrl_spi2: spi2-0 {
atmel,pins =
<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */
AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */
AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */
>;
};
};
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
>;
};
};
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */
AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */
>;
};
};
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
>;
};
pinctrl_usart0_rts: usart0_rts-0 {
atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart0_cts: usart0_cts-0 {
atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
>;
};
pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =