redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs 

On i.MX6SX SDB board, vgen6 supplies vdd1p1/vdd2p5 LDO and
sw2 supplies vdd3p0 LDO, this patch assigns corresponding power
supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log:

vdd1p1: supplied by regulator-dummy
vdd3p0: supplied by regulator-dummy
vdd2p5: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd1p1: supplied by VGEN6
vdd3p0: supplied by SW2
vdd2p5: supplied by VGEN6

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
alistair/sunxi64-5.4-dsi
Anson Huang 2019-05-12 09:57:35 +00:00 committed by Shawn Guo
parent 96a9169cf6
commit 37a4bdead1
3 changed files with 27 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/boot/dts/imx6sx-sdb-reva.dts
View File

@ -154,3 +154,15 @@
enable-active-high;
vin-supply = <&reg_can_en>;
};
&reg_vdd1p1 {
vin-supply = <&vgen6_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};

12
arch/arm/boot/dts/imx6sx-sdb.dts
View File

@ -137,6 +137,18 @@
vin-supply = <&sw1a_reg>;
};
&reg_vdd1p1 {
vin-supply = <&vgen6_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};
&reg_can_stby {
/* Transceiver EN/STBY is active low on RevB board */
gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;

6
arch/arm/boot/dts/imx6sx.dtsi
View File

@ -600,7 +600,7 @@
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1 {
reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@ -615,7 +615,7 @@
anatop-enable-bit = <0>;
};
regulator-3p0 {
reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@ -630,7 +630,7 @@
anatop-enable-bit = <0>;
};
regulator-2p5 {
reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;