diff --git a/.gitignore b/.gitignore
index 0c39aa20b6ba..6c119eab5d46 100644
--- a/.gitignore
+++ b/.gitignore
@@ -7,38 +7,40 @@
 # command after changing this file, to see if there are
 # any tracked files which get ignored after the change.
 #
-# Normal rules
+# Normal rules (sorted alphabetically)
 #
 .*
+*.a
+*.bin
+*.bz2
+*.c.[012]*.*
+*.dtb
+*.dtb.S
+*.dwo
+*.elf
+*.gcno
+*.gz
+*.i
+*.ko
+*.ll
+*.lst
+*.lz4
+*.lzma
+*.lzo
+*.mod.c
 *.o
 *.o.*
-*.a
+*.order
+*.patch
 *.s
-*.ko
 *.so
 *.so.dbg
-*.mod.c
-*.i
-*.lst
-*.symtypes
-*.order
-*.elf
-*.bin
-*.tar
-*.gz
-*.bz2
-*.lzma
-*.xz
-*.lz4
-*.lzo
-*.patch
-*.gcno
-*.ll
-modules.builtin
-Module.symvers
-*.dwo
 *.su
-*.c.[012]*.*
+*.symtypes
+*.tar
+*.xz
+Module.symvers
+modules.builtin
 
 #
 # Top-level generic files
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index bf5fc59a6938..088584a98cf4 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -62,7 +62,7 @@ pmu_system_controller: system-controller@10040000 {
 
 Example of clock consumer :
 
-usb3503: usb3503@08 {
+usb3503: usb3503@8 {
 	/* ... */
 	clock-names = "refclk";
 	clocks = <&pmu_system_controller 0>;
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 3c551894f621..fa674818e7e8 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -71,7 +71,7 @@ Optional nodes:
         - compatible: only "samsung,secure-firmware" is currently supported
         - reg: address of non-secure SYSRAM used for communication with firmware
 
-	firmware@0203F000 {
+	firmware@203F000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x0203F000 0x1000>;
 	};
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
index 6808fb5dee40..1b2ab1ff5587 100644
--- a/Documentation/devicetree/bindings/arm/sp810.txt
+++ b/Documentation/devicetree/bindings/arm/sp810.txt
@@ -33,7 +33,7 @@ Required properties:
 		property with the highest frequency
 
 Example:
-	v2m_sysctl: sysctl@020000 {
+	v2m_sysctl: sysctl@20000 {
 		compatible = "arm,sp810", "arm,primecell";
 		reg = <0x020000 0x1000>;
 		clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
index 00318d083c9e..50095802fb4a 100644
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
@@ -37,7 +37,7 @@ Example:
  		compatible = "arm,vexpress-sysreg";
  		reg = <0x10000000 0x1000>;
 
-		v2m_led_gpios: sys_led@08 {
+		v2m_led_gpios: sys_led@8 {
 			compatible = "arm,vexpress-sysreg,sys_led";
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index fedc213b5f1a..c760ecb81381 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -56,7 +56,7 @@ Examples:
 		interrupts = <115>;
         };
 
-	ahci: sata@01c18000 {
+	ahci: sata@1c18000 {
 		compatible = "allwinner,sun4i-a10-ahci";
 		reg = <0x01c18000 0x1000>;
 		interrupts = <56>;
diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt
index fa511db18408..a3d14719e478 100644
--- a/Documentation/devicetree/bindings/ata/imx-sata.txt
+++ b/Documentation/devicetree/bindings/ata/imx-sata.txt
@@ -25,7 +25,7 @@ Optional properties:
 
 Examples:
 
-sata@02200000 {
+sata@2200000 {
 	compatible = "fsl,imx6q-ahci";
 	reg = <0x02200000 0x4000>;
 	interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 6630d842c7a3..683eaf3aed79 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -61,7 +61,7 @@ Timing property for child nodes. It is mandatory, not optional.
 
 Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
 
-	weim: weim@021b8000 {
+	weim: weim@21b8000 {
 		compatible = "fsl,imx6q-weim";
 		reg = <0x021b8000 0x4000>;
 		clocks = <&clks 196>;
diff --git a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt
index 3dd28343b6ce..eb3ed628c6f1 100644
--- a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt
+++ b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt
@@ -28,7 +28,7 @@ which can normally be found in the datasheet.
 
 Example:
 
-	rsb@01f03400 {
+	rsb@1f03400 {
 		compatible = "allwinner,sun8i-a23-rsb";
 		reg = <0x01f03400 0x400>;
 		interrupts = <0 39 4>;
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
index 27468119fd94..4cd81742038f 100644
--- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
+++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
@@ -59,7 +59,7 @@ syscon: syscon@10000000 {
 	compatible = "syscon";
 	reg = <0x10000000 0x1000>;
 
-	oscclk0: osc0@0c {
+	oscclk0: osc0@c {
 		compatible = "arm,syscon-icst307";
 		#clock-cells = <0>;
 		lock-offset = <0x20>;
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
index 0c3d6015868d..2cba012f5af0 100644
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -80,7 +80,7 @@ Example 3: I2S controller node that consumes the clock generated by the clock
            controller. Refer to the standard clock bindings for information
            about 'clocks' and 'clock-names' property.
 
-i2s0: i2s@03830000 {
+i2s0: i2s@3830000 {
 	compatible = "samsung,i2s-v5";
 	reg = <0x03830000 0x100>;
 	dmas = <&pdma0 10
diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
index 4fc869b69d4a..f6272dcd96f4 100644
--- a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
+++ b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
@@ -43,7 +43,7 @@ Example: I2S controller node that consumes the clock generated by the clock
 	 controller. Refer to the standard clock bindings for information
          about 'clocks' and 'clock-names' property.
 
-	i2s0: i2s@03830000 {
+	i2s0: i2s@3830000 {
 		/* ... */
 		clock-names = "iis", "i2s_opclk0",
 				"i2s_opclk1";
diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
index e3eb0f657c5e..217871f483c0 100644
--- a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
+++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
@@ -21,7 +21,7 @@ Required properties:
    a size of 8.
 - #clock-cells : from common clock binding; shall be set to 1
 
-divider_clk: core-clock@0064 {
+divider_clk: core-clock@64 {
 	compatible = "marvell,dove-divider-clock";
 	reg = <0x0064 0x8>;
 	#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt
index b7adf4e3ea98..9823baf7acb6 100644
--- a/Documentation/devicetree/bindings/clock/imx1-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt
@@ -10,13 +10,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
 for the full list of i.MX1 clock IDs.
 
 Examples:
-	clks: ccm@0021b000 {
+	clks: ccm@21b000 {
 		#clock-cells = <1>;
 		compatible = "fsl,imx1-ccm";
 		reg = <0x0021b000 0x1000>;
 	};
 
-	pwm: pwm@00208000 {
+	pwm: pwm@208000 {
 		#pwm-cells = <2>;
 		compatible = "fsl,imx1-pwm";
 		reg = <0x00208000 0x1000>;
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index aa0a4d423ef5..a45ca67a9d5f 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -14,14 +14,14 @@ Examples:
 
 #include <dt-bindings/clock/imx6qdl-clock.h>
 
-clks: ccm@020c4000 {
+clks: ccm@20c4000 {
 	compatible = "fsl,imx6q-ccm";
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
 };
 
-uart1: serial@02020000 {
+uart1: serial@2020000 {
 	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 	reg = <0x02020000 0x4000>;
 	interrupts = <0 26 0x04>;
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
index 8398a3a5e106..3472b461ca93 100644
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -46,7 +46,7 @@ Example:
 /* ... */
 
 	Node of the MFD chip
-		max77686: max77686@09 {
+		max77686: max77686@9 {
 			compatible = "maxim,max77686";
 			interrupt-parent = <&wakeup_eint>;
 			interrupts = <26 0>;
@@ -71,7 +71,7 @@ Example:
 /* ... */
 
 	Node of the MFD chip
-		max77802: max77802@09 {
+		max77802: max77802@9 {
 			compatible = "maxim,max77802";
 			interrupt-parent = <&wakeup_eint>;
 			interrupts = <26 0>;
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index c35390f60545..7364953d0d0b 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -42,7 +42,7 @@ Required properties:
 
 Example:
 
-	clockgen-a@090ff000 {
+	clockgen-a@90ff000 {
 		compatible = "st,clkgen-c32";
 		reg = <0x90ff000 0x1000>;
 
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 7eda08eb8a1e..4ca21c3a6fc9 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -36,7 +36,7 @@ For the PRCM CCUs on A83T/H3/A64, two more clocks are needed:
 - "iosc": the SoC's internal frequency oscillator
 
 Example for generic CCU:
-ccu: clock@01c20000 {
+ccu: clock@1c20000 {
 	compatible = "allwinner,sun8i-h3-ccu";
 	reg = <0x01c20000 0x400>;
 	clocks = <&osc24M>, <&osc32k>;
@@ -46,7 +46,7 @@ ccu: clock@01c20000 {
 };
 
 Example for PRCM CCU:
-r_ccu: clock@01f01400 {
+r_ccu: clock@1f01400 {
 	compatible = "allwinner,sun50i-a64-r-ccu";
 	reg = <0x01f01400 0x100>;
 	clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>;
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 8f7619d8c8d8..1a042e20b115 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -137,7 +137,7 @@ the address block, which is related to the overall mmc block.
 
 For example:
 
-osc24M: clk@01c20050 {
+osc24M: clk@1c20050 {
 	#clock-cells = <0>;
 	compatible = "allwinner,sun4i-a10-osc-clk";
 	reg = <0x01c20050 0x4>;
@@ -145,7 +145,7 @@ osc24M: clk@01c20050 {
 	clock-output-names = "osc24M";
 };
 
-pll1: clk@01c20000 {
+pll1: clk@1c20000 {
 	#clock-cells = <0>;
 	compatible = "allwinner,sun4i-a10-pll1-clk";
 	reg = <0x01c20000 0x4>;
@@ -153,7 +153,7 @@ pll1: clk@01c20000 {
 	clock-output-names = "pll1";
 };
 
-pll5: clk@01c20020 {
+pll5: clk@1c20020 {
 	#clock-cells = <1>;
 	compatible = "allwinner,sun4i-pll5-clk";
 	reg = <0x01c20020 0x4>;
@@ -161,7 +161,7 @@ pll5: clk@01c20020 {
 	clock-output-names = "pll5_ddr", "pll5_other";
 };
 
-pll6: clk@01c20028 {
+pll6: clk@1c20028 {
 	#clock-cells = <1>;
 	compatible = "allwinner,sun6i-a31-pll6-clk";
 	reg = <0x01c20028 0x4>;
@@ -169,7 +169,7 @@ pll6: clk@01c20028 {
 	clock-output-names = "pll6", "pll6x2";
 };
 
-cpu: cpu@01c20054 {
+cpu: cpu@1c20054 {
 	#clock-cells = <0>;
 	compatible = "allwinner,sun4i-a10-cpu-clk";
 	reg = <0x01c20054 0x4>;
@@ -177,7 +177,7 @@ cpu: cpu@01c20054 {
 	clock-output-names = "cpu";
 };
 
-mmc0_clk: clk@01c20088 {
+mmc0_clk: clk@1c20088 {
 	#clock-cells = <1>;
 	compatible = "allwinner,sun4i-a10-mmc-clk";
 	reg = <0x01c20088 0x4>;
@@ -199,7 +199,7 @@ gmac_int_tx_clk: clk@3 {
 	clock-output-names = "gmac_int_tx";
 };
 
-gmac_clk: clk@01c20164 {
+gmac_clk: clk@1c20164 {
 	#clock-cells = <0>;
 	compatible = "allwinner,sun7i-a20-gmac-clk";
 	reg = <0x01c20164 0x4>;
@@ -211,7 +211,7 @@ gmac_clk: clk@01c20164 {
 	clock-output-names = "gmac";
 };
 
-mmc_config_clk: clk@01c13000 {
+mmc_config_clk: clk@1c13000 {
 	compatible = "allwinner,sun9i-a80-mmc-config-clk";
 	reg = <0x01c13000 0x10>;
 	clocks = <&ahb0_gates 8>;
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
index 616836e7e1e2..959d96632f5d 100644
--- a/Documentation/devicetree/bindings/clock/ti,cdce706.txt
+++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
@@ -25,7 +25,7 @@ Example:
 		};
 	};
 	...
-	i2c0: i2c-master@0d090000 {
+	i2c0: i2c-master@d090000 {
 		...
 		cdce706: clock-synth@69 {
 			compatible = "ti,cdce706";
diff --git a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt
index 5d38e9b7033f..f2dc3d9bca92 100644
--- a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt
+++ b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt
@@ -14,7 +14,7 @@ Optional properties:
  - reset-names : must contain "ahb"
 
 Example:
-	crypto: crypto-engine@01c15000 {
+	crypto: crypto-engine@1c15000 {
 		compatible = "allwinner,sun4i-a10-crypto";
 		reg = <0x01c15000 0x1000>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
index ed5e0a7894ad..05176f1ae108 100644
--- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
+++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
@@ -42,7 +42,7 @@ Optional properties:
 
 example:
 
-gpu_3d: gpu@00130000 {
+gpu_3d: gpu@130000 {
 	compatible = "vivante,gc";
 	reg = <0x00130000 0x4000>;
 	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt
index 66a8f86e5d12..6d021e71c9cf 100644
--- a/Documentation/devicetree/bindings/display/imx/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt
@@ -32,11 +32,11 @@ Optional properties
 
 Example:
 
-	gpr: iomuxc-gpr@020e0000 {
+	gpr: iomuxc-gpr@20e0000 {
 		/* ... */
 	};
 
-        hdmi: hdmi@0120000 {
+        hdmi: hdmi@120000 {
                 #address-cells = <1>;
                 #size-cells = <0>;
                 compatible = "fsl,imx6q-hdmi";
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
index 8c9e9f515c87..5a9ce511be88 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
@@ -78,7 +78,7 @@ chosen {
 	stdout-path = "display0";
 };
 
-soc@01c00000 {
+soc@1c00000 {
 	lcdc0: lcdc@1c0c000 {
 		compatible = "allwinner,sun4i-a10-lcdc";
 		...
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index 92441086caba..b7faa6f6a326 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -266,7 +266,7 @@ connector {
 	};
 };
 
-hdmi: hdmi@01c16000 {
+hdmi: hdmi@1c16000 {
 	compatible = "allwinner,sun5i-a10s-hdmi";
 	reg = <0x01c16000 0x1000>;
 	interrupts = <58>;
@@ -305,7 +305,7 @@ hdmi: hdmi@01c16000 {
 	};
 };
 
-tve0: tv-encoder@01c0a000 {
+tve0: tv-encoder@1c0a000 {
 	compatible = "allwinner,sun4i-a10-tv-encoder";
 	reg = <0x01c0a000 0x1000>;
 	clocks = <&ahb_gates 34>;
diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
index 3b484380c56a..8ad556aca70b 100644
--- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
@@ -12,7 +12,7 @@ Required properties:
 		second cell holding the request line number.
 
 Example:
-	dma: dma-controller@01c02000 {
+	dma: dma-controller@1c02000 {
 		compatible = "allwinner,sun4i-a10-dma";
 		reg = <0x01c02000 0x1000>;
 		interrupts = <27>;
@@ -32,7 +32,7 @@ The three cells in order are:
 3. The port ID as specified in the datasheet
 
 Example:
-	spi2: spi@01c17000 {
+	spi2: spi@1c17000 {
 		compatible = "allwinner,sun4i-a10-spi";
 		reg = <0x01c17000 0x1000>;
 		interrupts = <0 12 4>;
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 9700b1d00fed..d4c34774d626 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -64,7 +64,7 @@ The two cells in order are:
 2. The port ID as specified in the datasheet
 
 Example:
-spi2: spi@01c6a000 {
+spi2: spi@1c6a000 {
 	compatible = "allwinner,sun6i-a31-spi";
 	reg = <0x01c6a000 0x1000>;
 	interrupts = <0 67 4>;
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 41f0c1a07c56..66026dcf53e1 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -142,7 +142,7 @@ mcasp0: mcasp@48038000 {
 };
 
 2.
-edma1: edma@02728000 {
+edma1: edma@2728000 {
 	compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
 	reg =	<0x02728000 0x8000>;
 	reg-names = "edma3_cc";
@@ -165,13 +165,13 @@ edma1: edma@02728000 {
 	power-domains = <&k2g_pds 0x4f>;
 };
 
-edma1_tptc0: tptc@027b0000 {
+edma1_tptc0: tptc@27b0000 {
 	compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
 	reg =	<0x027b0000 0x400>;
 	power-domains = <&k2g_pds 0x4f>;
 };
 
-edma1_tptc1: tptc@027b8000 {
+edma1_tptc1: tptc@27b8000 {
 	compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
 	reg =	<0x027b8000 0x400>;
 	power-domains = <&k2g_pds 0x4f>;
diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt
index 3207ceb04d0b..abec59f35fde 100644
--- a/Documentation/devicetree/bindings/dma/zxdma.txt
+++ b/Documentation/devicetree/bindings/dma/zxdma.txt
@@ -26,7 +26,7 @@ Controller:
 Client:
 Use specific request line passing from dmax
 For example, spdif0 tx channel request line is 4
-	spdif0: spdif0@0b004000 {
+	spdif0: spdif0@b004000 {
 		#sound-dai-cells = <0>;
 		compatible = "zte,zx296702-spdif";
 		reg = <0x0b004000 0x1000>;
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
index e821e16ad65b..0c10802c8327 100644
--- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
@@ -66,7 +66,7 @@ See ".../sram/sram.txt" for the bindings.
 
 Example:
 
-hsp_top0: hsp@03c00000 {
+hsp_top0: hsp@3c00000 {
 	...
 	#mbox-cells = <2>;
 };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
index 6c7e6c7302f5..0423699d74c7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
@@ -25,7 +25,7 @@ Please refer to gpio.txt in this directory for details of the common GPIO
 bindings used by client devices.
 
 Example:
-	dspgpio0: keystone_dsp_gpio@02620240 {
+	dspgpio0: keystone_dsp_gpio@2620240 {
 		compatible = "ti,keystone-dsp-gpio";
 		ti,syscon-dev = <&devctrl 0x240>;
 		gpio-controller;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt
index 1fd98ffa8cb7..528f5ef5a893 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt
@@ -30,7 +30,7 @@ Optional properties:
 
 Example:
 
-	pdc_gpios: gpio-controller@02006500 {
+	pdc_gpios: gpio-controller@2006500 {
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt
index 174cdf309170..b05a90e0ab29 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt
@@ -59,7 +59,7 @@ Required properties:
 
 Example:
 
-	gpios: gpio-controller@02005800 {
+	gpios: gpio-controller@2005800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "img,tz1090-gpio";
diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
index 2296d782b4c2..7d53a2b79553 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
@@ -17,7 +17,7 @@ Optional properties :
 
 Example :
 
-i2c@02010084000 {
+i2c@2010084000 {
 	compatible = "lsi,api2c";
 	device_type = "i2c";
 	#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
index 6b765485af7d..49df0053347a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
@@ -24,7 +24,7 @@ Slave device properties:
 
 Example:
 
-	p2wi@01f03400 {
+	p2wi@1f03400 {
 		compatible = "allwinner,sun6i-a31-p2wi";
 		reg = <0x01f03400 0x400>;
 		interrupts = <0 39 4>;
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
index 77d5aba1bd8c..baecc4a85197 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
@@ -19,7 +19,7 @@ Optional properties:
 
 Example:
 
-ak8974@0f {
+ak8974@f {
 	compatible = "asahi-kasei,ak8974";
 	reg = <0x0f>;
 	avdd-supply = <&foo_reg>;
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
index e1e7dd3259f6..aa67ceb0d4e0 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
@@ -13,7 +13,7 @@ Optional properties:
 
 Example:
 
-ak8975@0c {
+ak8975@c {
         compatible = "asahi-kasei,ak8975";
         reg = <0x0c>;
         gpios = <&gpj0 7 0>;
diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
index 4357e498ef04..1458c3179a63 100644
--- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
+++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
@@ -19,7 +19,7 @@ Example:
 
 #include <dt-bindings/input/input.h>
 
-	lradc: lradc@01c22800 {
+	lradc: lradc@1c22800 {
 		compatible = "allwinner,sun4i-a10-lradc-keys";
 		reg = <0x01c22800 0x100>;
 		interrupts = <31>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
index 49fa14ed155c..298e3442f143 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -10,7 +10,7 @@ Required properties:
 
 Example:
 
-	egalax_ts@04 {
+	touchscreen@4 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio1>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
index e67e58b61706..164915004424 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
@@ -21,7 +21,7 @@ Optional properties:
   each read. Valid values are 1, 4, 8, 16 and 32.
 
 Example:
-	tsc: tsc@02040000 {
+	tsc: tsc@2040000 {
 		compatible = "fsl,imx6ul-tsc";
 		reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
 		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
index 4ae553eb333d..4903fb72d883 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
@@ -20,7 +20,7 @@ Required properties:
 
 Example:
 
-sc-nmi-intc@01c00030 {
+sc-nmi-intc@1c00030 {
 	compatible = "allwinner,sun7i-a20-sc-nmi";
 	interrupt-controller;
 	#interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
index d9bb106bdd16..5f94d7739d8d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
@@ -20,7 +20,7 @@ Please refer to interrupts.txt in this directory for details of the common
 Interrupt Controllers bindings used by client devices.
 
 Example:
-	kirq0: keystone_irq0@026202a0 {
+	kirq0: keystone_irq0@26202a0 {
 		compatible = "ti,keystone-irq";
 		ti,syscon-dev = <&devctrl 0x2a0>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
index b2641ceb2b40..059139abce35 100644
--- a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
@@ -115,7 +115,7 @@ to non-secure vs secure interrupt line.
 		iommus = <&apps_iommu 4>;
 	};
 
-	gpu@01c00000 {
+	gpu@1c00000 {
 		...
 		iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
 	};
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
index 3ed027cfca95..857df929a654 100644
--- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
@@ -53,7 +53,7 @@ Example: R8A7791 IPMMU-MX and VSP1-D0 bus master
 		#iommu-cells = <1>;
 	};
 
-	vsp1@fe928000 {
+	vsp@fe928000 {
 		...
 		iommus = <&ipmmu_mx 13>;
 		...
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt
index 59b56365f648..cf1ea403ba7a 100644
--- a/Documentation/devicetree/bindings/leds/register-bit-led.txt
+++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt
@@ -32,7 +32,7 @@ syscon: syscon@10000000 {
 	compatible = "arm,realview-pb1176-syscon", "syscon";
 	reg = <0x10000000 0x1000>;
 
-	led@08.0 {
+	led@8.0 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x01>;
@@ -40,7 +40,7 @@ syscon: syscon@10000000 {
 		linux,default-trigger = "heartbeat";
 		default-state = "on";
 	};
-	led@08.1 {
+	led@8.1 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x02>;
@@ -48,7 +48,7 @@ syscon: syscon@10000000 {
 		linux,default-trigger = "mmc0";
 		default-state = "off";
 	};
-	led@08.2 {
+	led@8.2 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x04>;
@@ -56,35 +56,35 @@ syscon: syscon@10000000 {
 		linux,default-trigger = "cpu0";
 		default-state = "off";
 	};
-	led@08.3 {
+	led@8.3 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x08>;
 		label = "versatile:3";
 		default-state = "off";
 	};
-	led@08.4 {
+	led@8.4 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x10>;
 		label = "versatile:4";
 		default-state = "off";
 	};
-	led@08.5 {
+	led@8.5 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x20>;
 		label = "versatile:5";
 		default-state = "off";
 	};
-	led@08.6 {
+	led@8.6 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x40>;
 		label = "versatile:6";
 		default-state = "off";
 	};
-	led@08.7 {
+	led@8.7 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x80>;
diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt
index b449d025049f..c3b55b3ede8a 100644
--- a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt
+++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt
@@ -29,7 +29,7 @@ Required properties:
 Example(K2G):
 ------------
 
-	msgmgr: msgmgr@02a00000 {
+	msgmgr: msgmgr@2a00000 {
 		compatible = "ti,k2g-message-manager";
 		#mbox-cells = <2>;
 		reg-names = "queue_proxy_region", "queue_state_debug_region";
diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt
index ea2b16ced49b..7f722316458a 100644
--- a/Documentation/devicetree/bindings/marvell.txt
+++ b/Documentation/devicetree/bindings/marvell.txt
@@ -446,7 +446,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
        that services interrupts for this device.
 
    Example Discovery CPU Error node:
-     cpu-error@0070 {
+     cpu-error@70 {
 	     compatible = "marvell,mv64360-cpu-error";
 	     reg = <0x70 0x10 0x128 0x28>;
 	     interrupts = <3>;
@@ -466,7 +466,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
        that services interrupts for this device.
 
    Example Discovery SRAM Controller node:
-     sram-ctrl@0380 {
+     sram-ctrl@380 {
 	     compatible = "marvell,mv64360-sram-ctrl";
 	     reg = <0x380 0x80>;
 	     interrupts = <13>;
diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
index 5218921629ed..49f8bcc2ea4d 100644
--- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt
+++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
@@ -27,7 +27,7 @@ Documentation/devicetree/bindings/media/video-interfaces.txt.
 
 Example:
 
-	tc358743@0f {
+	tc358743@f {
 		compatible = "toshiba,tc358743";
 		reg = <0x0f>;
 		clocks = <&hdmi_osc>;
diff --git a/Documentation/devicetree/bindings/media/img-ir-rev1.txt b/Documentation/devicetree/bindings/media/img-ir-rev1.txt
index 5434ce61b925..ed9ec52b77e0 100644
--- a/Documentation/devicetree/bindings/media/img-ir-rev1.txt
+++ b/Documentation/devicetree/bindings/media/img-ir-rev1.txt
@@ -25,7 +25,7 @@ Optional properties:
 
 Example:
 
-	ir@02006200 {
+	ir@2006200 {
 		compatible = "img,ir-rev1";
 		reg = <0x02006200 0x100>;
 		interrupts = <29 4>;
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
index 9b695bcbf219..16427017cb45 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
@@ -22,7 +22,7 @@ Optional properties:
 
 Example: R8A7790 (R-Car H2) VSP1-S node
 
-	vsp1@fe928000 {
+	vsp@fe928000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe928000 0 0x8000>;
 		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt
index 8be2a040c6c6..ece0832fdeaf 100644
--- a/Documentation/devicetree/bindings/media/stih-cec.txt
+++ b/Documentation/devicetree/bindings/media/stih-cec.txt
@@ -13,7 +13,7 @@ Required properties:
 
 Example for STIH407:
 
-sti-cec@094a087c {
+sti-cec@94a087c {
 	compatible = "st,stih-cec";
 	reg = <0x94a087c 0x64>;
 	clocks = <&clk_sysin>;
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
index 6af3fc210ecc..c7888d6f6408 100644
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -50,7 +50,7 @@ Example:
 
 /* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */
 
-	c8sectpfe@08a20000 {
+	c8sectpfe@8a20000 {
 		compatible = "st,stih407-c8sectpfe";
 		reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
 		reg-names = "stfe", "stfe-ram";
diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt
index 302a0b183cb8..91648c569b1e 100644
--- a/Documentation/devicetree/bindings/media/sunxi-ir.txt
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -14,7 +14,7 @@ Optional properties:
 
 Example:
 
-ir0: ir@01c21800 {
+ir0: ir@1c21800 {
 	compatible = "allwinner,sun4i-a10-ir";
 	clocks = <&apb0_gates 6>, <&ir0_clk>;
 	clock-names = "apb", "ir";
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 741e76688cf2..0f2587fa42cb 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -19,7 +19,7 @@ Required properties:
 
 Example:
 
-	max77686: pmic@09 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 0>;
diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
index 51fc1a60caa5..f2f3fe75901c 100644
--- a/Documentation/devicetree/bindings/mfd/max77802.txt
+++ b/Documentation/devicetree/bindings/mfd/max77802.txt
@@ -18,7 +18,7 @@ Required properties:
 
 Example:
 
-	max77802: pmic@09 {
+	max77802: pmic@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&intc>;
 		interrupts = <26 IRQ_TYPE_NONE>;
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
index bcb6abb9d413..336c0495c8a3 100644
--- a/Documentation/devicetree/bindings/mfd/mfd.txt
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -41,7 +41,7 @@ foo@1000 {
 	compatible = "syscon", "simple-mfd";
 	reg = <0x01000 0x1000>;
 
-	led@08.0 {
+	led@8.0 {
 		compatible = "register-bit-led";
 		offset = <0x08>;
 		mask = <0x01>;
diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
index badff3611a98..86dd8191b04c 100644
--- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
+++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
@@ -10,7 +10,7 @@ Required properties:
   - #io-channel-cells: shall be 0,
 
 Example:
-	ths: ths@01c25000 {
+	ths: ths@1c25000 {
 		compatible = "allwinner,sun8i-a33-ths";
 		reg = <0x01c25000 0x100>;
 		#thermal-sensor-cells = <0>;
@@ -47,7 +47,7 @@ Optional properties:
 
 Example:
 
-	rtp: rtp@01c25000 {
+	rtp: rtp@1c25000 {
 		compatible = "allwinner,sun4i-a10-ts";
 		reg = <0x01c25000 0x100>;
 		interrupts = <29>;
diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
index 03c5a551da55..dd2c06540485 100644
--- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
+++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -15,7 +15,7 @@ The prcm node may contain several subdevices definitions:
 
 Example:
 
-	prcm: prcm@01f01400 {
+	prcm: prcm@1f01400 {
 		compatible = "allwinner,sun6i-a31-prcm";
 		reg = <0x01f01400 0x200>;
 
diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
index 408f768686f1..8b92d4576c42 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.txt
+++ b/Documentation/devicetree/bindings/mfd/syscon.txt
@@ -18,7 +18,7 @@ Optional property:
   performed on the device.
 
 Examples:
-gpr: iomuxc-gpr@020e0000 {
+gpr: iomuxc-gpr@20e0000 {
 	compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
 	reg = <0x020e0000 0x38>;
 };
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 94a90b49a692..fb11ae8b3b72 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -146,7 +146,7 @@ sdhci@ab000000 {
 
 Example with sdio function subnode:
 
-mmc3: mmc@01c12000 {
+mmc3: mmc@1c12000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index e35645598315..6b3d40ca395e 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -74,7 +74,7 @@ mmc0: sdhci@fe81e000 {
 
 /* Example SD stih407 family configuration */
 
-mmc1: sdhci@09080000 {
+mmc1: sdhci@9080000 {
 	compatible	= "st,sdhci-stih407", "st,sdhci";
 	reg		= <0x09080000 0x7ff>;
 	reg-names	= "mmc";
@@ -90,7 +90,7 @@ mmc1: sdhci@09080000 {
 
 /* Example eMMC stih407 family configuration */
 
-mmc0: sdhci@09060000 {
+mmc0: sdhci@9060000 {
 	compatible	= "st,sdhci-stih407", "st,sdhci";
 	reg		= <0x09060000 0x7ff>, <0x9061008 0x20>;
 	reg-names	= "mmc", "top-mmc-delay";
diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
index 63b57e2a10fb..132e0007d7d6 100644
--- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
@@ -29,7 +29,7 @@ Optional properties:
 
 Examples:
 	- Within .dtsi:
-	mmc0: mmc@01c0f000 {
+	mmc0: mmc@1c0f000 {
 		compatible = "allwinner,sun5i-a13-mmc";
 		reg = <0x01c0f000 0x1000>;
 		clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>;
@@ -39,7 +39,7 @@ Examples:
 	};
 
 	- Within dts:
-	mmc0: mmc@01c0f000 {
+	mmc0: mmc@1c0f000 {
 		pinctrl-names = "default", "default";
 		pinctrl-0 = <&mmc0_pins_a>;
 		pinctrl-1 = <&mmc0_cd_pin_reference_design>;
diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
index a37c67bcb43b..5e13a5cdff03 100644
--- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
@@ -31,7 +31,7 @@ see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
 
 
 Examples:
-nfc: nand@01c03000 {
+nfc: nand@1c03000 {
 	compatible = "allwinner,sun4i-a10-nand";
 	reg = <0x01c03000 0x1000>;
 	interrupts = <0 37 1>;
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
index 10640b17c866..e98118aef5f6 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
@@ -10,7 +10,7 @@ Required properties:
 
 Example:
 
-emac: ethernet@01c0b000 {
+emac: ethernet@1c0b000 {
        compatible = "allwinner,sun4i-a10-emac";
        reg = <0x01c0b000 0x1000>;
        interrupts = <55>;
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
index 4ec56413779d..ab5b8613b0ef 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
@@ -9,7 +9,7 @@ Optional properties:
 - phy-supply: phandle to a regulator if the PHY needs one
 
 Example at the SoC level:
-mdio@01c0b080 {
+mdio@1c0b080 {
 	compatible = "allwinner,sun4i-a10-mdio";
 	reg = <0x01c0b080 0x14>;
 	#address-cells = <1>;
@@ -18,7 +18,7 @@ mdio@01c0b080 {
 
 And at the board level:
 
-mdio@01c0b080 {
+mdio@1c0b080 {
 	phy-supply = <&reg_emac_3v3>;
 
 	phy0: ethernet-phy@0 {
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
index ea4d752389a2..8b3f953656e3 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
@@ -15,7 +15,7 @@ Optional properties:
 
 Examples:
 
-	gmac: ethernet@01c50000 {
+	gmac: ethernet@1c50000 {
 		compatible = "allwinner,sun7i-a20-gmac";
 		reg = <0x01c50000 0x10000>,
 		      <0x01c20164 0x4>;
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
index 26c77d985faf..3956af1d30f3 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@@ -109,7 +109,7 @@ ethernet@f0ba0000 {
 	reg = <0xf0ba0000 0xfc4c>;
 	interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
 
-	mdio@0e14 {
+	mdio@e14 {
 		compatible = "brcm,genet-mdio-v4";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index 78138333ff7a..63e90421d029 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -45,7 +45,7 @@ Required properties:
 
 Example:
 SoC dtsi:
-m_can1: can@020e8000 {
+m_can1: can@20e8000 {
 	compatible = "bosch,m_can";
 	reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
 	reg-names = "m_can", "message_ram";
diff --git a/Documentation/devicetree/bindings/net/can/sun4i_can.txt b/Documentation/devicetree/bindings/net/can/sun4i_can.txt
index 84ed1909df76..f69845e6feaf 100644
--- a/Documentation/devicetree/bindings/net/can/sun4i_can.txt
+++ b/Documentation/devicetree/bindings/net/can/sun4i_can.txt
@@ -19,7 +19,7 @@ SoC common .dtsi file:
 		allwinner,pull = <0>;
 	};
 ...
-	can0: can@01c2bc00 {
+	can0: can@1c2bc00 {
 		compatible = "allwinner,sun4i-a10-can";
 		reg = <0x01c2bc00 0x400>;
 		interrupts = <0 26 4>;
@@ -29,7 +29,7 @@ SoC common .dtsi file:
 
 Board specific .dts file:
 
-	can0: can@01c2bc00 {
+	can0: can@1c2bc00 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&can0_pins_a>;
 		status = "okay";
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
index b2bd4704f859..86602f264dce 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -20,7 +20,7 @@ Optional properties:
 
 Example:
 
-mmc3: mmc@01c12000 {
+mmc3: mmc@1c12000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index ef06d061913c..081c49c0dac0 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -13,13 +13,13 @@ Are child nodes of qfprom, bindings of which as described in
 bindings/nvmem/nvmem.txt
 
 Example for sun4i:
-	sid@01c23800 {
+	sid@1c23800 {
 		compatible = "allwinner,sun4i-a10-sid";
 		reg = <0x01c23800 0x10>
 	};
 
 Example for sun7i:
-	sid@01c23800 {
+	sid@1c23800 {
 		compatible = "allwinner,sun7i-a20-sid";
 		reg = <0x01c23800 0x200>
 	};
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt
index 6462e12d8de6..0415265c215a 100644
--- a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt
@@ -10,7 +10,7 @@ Required Properties:
 
 Example:
 
-otp: otp@0301c800 {
+otp: otp@301c800 {
 	compatible = "brcm,ocotp";
 	reg = <0x0301c800 0x2c>;
 	brcm,ocotp-size = <2048>;
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
index 70d791b03ea1..f162c72b4e36 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
@@ -19,7 +19,7 @@ Optional properties:
 
 Example:
 
-	ocotp: ocotp@021bc000 {
+	ocotp: ocotp@21bc000 {
 		compatible = "fsl,imx6q-ocotp", "syscon";
 		reg = <0x021bc000 0x4000>;
 		clocks = <&clks IMX6QDL_CLK_IIM>;
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt
index b52bc11e9597..fd06c09b822b 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.txt
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt
@@ -33,7 +33,7 @@ bits:	Is pair of bit location and number of bits, which specifies offset
 For example:
 
 	/* Provider */
-	qfprom: qfprom@00700000 {
+	qfprom: qfprom@700000 {
 		...
 
 		/* Data cells */
diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt
index 4ad68b7f5c18..26fe878d5c86 100644
--- a/Documentation/devicetree/bindings/nvmem/qfprom.txt
+++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt
@@ -12,7 +12,7 @@ bindings/nvmem/nvmem.txt
 
 Example:
 
-	qfprom: qfprom@00700000 {
+	qfprom: qfprom@700000 {
 		compatible 	= "qcom,qfprom";
 		reg		= <0x00700000 0x8000>;
 		...
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 982a74ea6df9..1b4d2803dad1 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -255,7 +255,7 @@ Tegra30:
 
 SoC DTSI:
 
-	pcie-controller@00003000 {
+	pcie-controller@3000 {
 		compatible = "nvidia,tegra30-pcie";
 		device_type = "pci";
 		reg = <0x00003000 0x00000800   /* PADS registers */
@@ -334,7 +334,7 @@ SoC DTSI:
 
 Board DTS:
 
-	pcie-controller@00003000 {
+	pcie-controller@3000 {
 		status = "okay";
 
 		avdd-pexa-supply = <&ldo1_reg>;
@@ -360,7 +360,7 @@ Tegra124:
 
 SoC DTSI:
 
-	pcie-controller@01003000 {
+	pcie-controller@1003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
 		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
@@ -425,7 +425,7 @@ SoC DTSI:
 
 Board DTS:
 
-	pcie-controller@01003000 {
+	pcie-controller@1003000 {
 		status = "okay";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -456,7 +456,7 @@ Tegra210:
 
 SoC DTSI:
 
-	pcie-controller@01003000 {
+	pcie-controller@1003000 {
 		compatible = "nvidia,tegra210-pcie";
 		device_type = "pci";
 		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
@@ -521,7 +521,7 @@ SoC DTSI:
 
 Board DTS:
 
-	pcie-controller@01003000 {
+	pcie-controller@1003000 {
 		status = "okay";
 
 		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
index 761c4bc24a9b..10efff28b52b 100644
--- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
@@ -15,7 +15,7 @@ Required properties For the child node:
 - #phy-cells: must be 0
 
 Example:
-	pcie_phy: phy@0301d0a0 {
+	pcie_phy: phy@301d0a0 {
 		compatible = "brcm,cygnus-pcie-phy";
 		reg = <0x0301d0a0 0x14>;
 
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
index 1d25b04cd05e..6ac98b3b5f57 100644
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
@@ -23,7 +23,7 @@ Optional properties:
   the 17.78mA TX reference current. Default: 100
 
 Example:
-usbphy1: usbphy@020c9000 {
+usbphy1: usbphy@20c9000 {
 	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 	reg = <0x020c9000 0x1000>;
 	interrupts = <0 44 0x04>;
diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
index f9853156e311..64f7109aea1f 100644
--- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
@@ -25,7 +25,7 @@ It is recommended to list all clocks and resets available.
 The driver will only use those matching the phy_type.
 
 Example:
-	usbphy1: phy@00a01800 {
+	usbphy1: phy@a01800 {
 		compatible = "allwinner,sun9i-a80-usb-phy";
 		reg = <0x00a01800 0x4>;
 		clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 6f2ec9af0de2..09789fdfa749 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -89,7 +89,7 @@ Optional subnode-properties:
 
 Examples:
 
-pio: pinctrl@01c20800 {
+pio: pinctrl@1c20800 {
 	compatible = "allwinner,sun5i-a13-pinctrl";
 	reg = <0x01c20800 0x400>;
 	#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
index 42d74f8a1bcc..a1050b5982ec 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
@@ -58,14 +58,14 @@ Some requirements for using fsl,imx-pinctrl binding:
    configurations by referring to the phandle of that pin configuration node.
 
 Examples:
-usdhc@0219c000 { /* uSDHC4 */
+usdhc@219c000 { /* uSDHC4 */
 	non-removable;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4_1>;
 };
 
-iomuxc@020e0000 {
+iomuxc@20e0000 {
 	compatible = "fsl,imx6q-iomuxc";
 	reg = <0x020e0000 0x4000>;
 
diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
index 51b943cc9770..cf9ccdff4455 100644
--- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
@@ -89,7 +89,7 @@ Valid values for pin and group names are:
 
 Example:
 
-	pinctrl_pdc: pinctrl@02006500 {
+	pinctrl_pdc: pinctrl@2006500 {
 		#gpio-range-cells = <3>;
 		compatible = "img,tz1090-pdc-pinctrl";
 		reg = <0x02006500 0x100>;
@@ -121,7 +121,7 @@ Example board file extracts:
 		};
 	};
 
-	ir: ir@02006200 {
+	ir: ir@2006200 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&irmod_default>;
 	};
diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
index 509faa87ad0e..2dfd9a3fc1e4 100644
--- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
@@ -197,7 +197,7 @@ Valid values for pin and group names are:
 
 Example:
 
-	pinctrl: pinctrl@02005800 {
+	pinctrl: pinctrl@2005800 {
 		#gpio-range-cells = <3>;
 		compatible = "img,tz1090-pinctrl";
 		reg = <0x02005800 0xe4>;
@@ -221,7 +221,7 @@ Example board file extract:
 		};
 	};
 
-	uart@02004b00 {
+	uart@2004b00 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_default>;
 	};
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
index 4048f43a9d29..02e971c39d81 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -97,7 +97,7 @@ SoC file extract:
 Board file extract:
 -------------------
 
-	pcie-controller@01003000 {
+	pcie-controller@1003000 {
 		...
 
 		phys = <&padctl 0>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
index 37d744750579..231fa1db7c5e 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
@@ -86,7 +86,7 @@ Examples:
 		reg = <0 0x1020C020 0 0x1000>;
 	};
 
-	pinctrl@01c20800 {
+	pinctrl@1c20800 {
 		compatible = "mediatek,mt8135-pinctrl";
 		reg = <0 0x1000B000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
index 013c675b5b64..48b9be48af18 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
@@ -89,7 +89,7 @@ Example:
 		interrupt-names = "irqmux";
 		ranges = <0 0x09610000 0x6000>;
 
-		pio0: gpio@09610000 {
+		pio0: gpio@9610000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
index e312a71b2f94..aaf01e929eea 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
@@ -175,7 +175,7 @@ to specify in a pin configuration subnode:
 
 Example:
 
-	tlmm: pinctrl@01010000 {
+	tlmm: pinctrl@1010000 {
 		compatible = "qcom,msm8996-pinctrl";
 		reg = <0x01010000 0x300000>;
 		interrupts = <0 208 0>;
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
index 6c1498958d48..e371b262d709 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -40,7 +40,7 @@ Optional properties:
 
 Example:
 
-	gpc: gpc@020dc000 {
+	gpc: gpc@20dc000 {
 		compatible = "fsl,imx6q-gpc";
 		reg = <0x020dc000 0x4000>;
 		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
@@ -80,7 +80,7 @@ that is a phandle pointing to the power domain the device belongs to.
 
 Example of a device that is part of the PU power domain:
 
-	vpu: vpu@02040000 {
+	vpu: vpu@2040000 {
 		reg = <0x02040000 0x3c000>;
 		/* ... */
 		power-domains = <&pd_pu>;
diff --git a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt
index dc7c9bad63ea..1b81fcd9fb72 100644
--- a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt
+++ b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt
@@ -10,7 +10,7 @@ Required Properties:
 -reg: Specifies the physical address of the SNVS_LPCR register
 
 Example:
-	snvs@020cc000 {
+	snvs@20cc000 {
 		compatible = "fsl,sec-v4.0-mon", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
index c82f12e2d85c..c5c03789ed1e 100644
--- a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
+++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
@@ -37,12 +37,12 @@ Example 1:
 Setup keystone reset so that in case software reset or
 WDT0 is triggered it issues hard reset for SoC.
 
-pllctrl: pll-controller@02310000 {
+pllctrl: pll-controller@2310000 {
 	compatible = "ti,keystone-pllctrl", "syscon";
 	reg = <0x02310000 0x200>;
 };
 
-devctrl: device-state-control@02620000 {
+devctrl: device-state-control@2620000 {
 	compatible = "ti,keystone-devctrl", "syscon";
 	reg = <0x02620000 0x1000>;
 };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
index 0f766333b6eb..37f91fa57654 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
@@ -8,7 +8,7 @@ Required properties:
 
 Example:
 
-mcu@0a {
+mcu@a {
 	#gpio-cells = <2>;
 	compatible = "fsl,mc9s08qg8-mpc8349emitx",
 		     "fsl,mcu-mpc8349emitx";
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
index c5171660eaf9..51ff54c8b8ef 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
@@ -14,7 +14,7 @@ Required properties:
 
 Example:
 
-	pwm: pwm@01c20e00 {
+	pwm: pwm@1c20e00 {
 		compatible = "allwinner,sun7i-a20-pwm";
 		reg = <0x01c20e00 0xc>;
 		clocks = <&osc24M>;
diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt
index 0dded64d89d3..e9f7578ca09a 100644
--- a/Documentation/devicetree/bindings/regulator/max77686.txt
+++ b/Documentation/devicetree/bindings/regulator/max77686.txt
@@ -40,7 +40,7 @@ to get matched with their hardware counterparts as follow:
 
 Example:
 
-	max77686: pmic@09 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 IRQ_TYPE_NONE>;
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
index 879e98d3b9aa..b82943d83677 100644
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ b/Documentation/devicetree/bindings/regulator/max77802.txt
@@ -71,7 +71,7 @@ has not been disabled for that state using "regulator-off-in-suspend".
 
 Example:
 
-	max77802@09 {
+	max77802@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 0>;
diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
index c8f775714887..4ca66c96fe97 100644
--- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
+++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
@@ -14,7 +14,7 @@ Required properties:
 
 example:
 
-ahb1_rst: reset@01c202c0 {
+ahb1_rst: reset@1c202c0 {
 	#reset-cells = <1>;
 	compatible = "allwinner,sun6i-a31-ahb1-reset";
 	reg = <0x01c202c0 0xc>;
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
index 13301777e11c..6ed79e60248a 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
+++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
@@ -14,7 +14,7 @@ Required properties:
 
 example:
 
-src: src@020d8000 {
+src: src@20d8000 {
         compatible = "fsl,imx6q-src";
         reg = <0x020d8000 0x4000>;
         interrupts = <0 91 0x04 0 96 0x04>;
@@ -33,10 +33,10 @@ reset.txt
 
 example:
 
-        ipu1: ipu@02400000 {
+        ipu1: ipu@2400000 {
                 resets = <&src 2>;
         };
-        ipu2: ipu@02800000 {
+        ipu2: ipu@2800000 {
                 resets = <&src 4>;
         };
 
diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
index c516d24959f2..86945502ccb5 100644
--- a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
+++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
@@ -67,7 +67,7 @@ using the syscon node, and a consumer (a DSP device) on the TI Keystone 2
 
 / {
 	soc {
-		psc: power-sleep-controller@02350000 {
+		psc: power-sleep-controller@2350000 {
 			compatible = "syscon", "simple-mfd";
 			reg = <0x02350000 0x1000>;
 
diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
deleted file mode 100644
index 916f57601a8f..000000000000
--- a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Dallas DS1339		I2C Serial Real-Time Clock
-
-Required properties:
-- compatible: Should contain "dallas,ds1339".
-- reg: I2C address for chip
-
-Optional properties:
-- trickle-resistor-ohms : Selected resistor for trickle charger
-	Values usable for ds1339 are 250, 2000, 4000
-	Should be given if trickle charger should be enabled
-- trickle-diode-disable : Do not use internal trickle charger diode
-	Should be given if internal trickle charger diode should be disabled
-Example:
-	ds1339: rtc@68 {
-		compatible = "dallas,ds1339";
-		trickle-resistor-ohms = <250>;
-		reg = <0x68>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
new file mode 100644
index 000000000000..d28d6e7f6ae8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
@@ -0,0 +1,44 @@
+Dallas DS1307 and compatible RTC
+
+Required properties:
+- compatible: should be one of:
+	"dallas,ds1307",
+	"dallas,ds1308",
+	"dallas,ds1337",
+	"dallas,ds1338",
+	"dallas,ds1339",
+	"dallas,ds1388",
+	"dallas,ds1340",
+	"dallas,ds1341",
+	"maxim,ds3231",
+	"st,m41t0",
+	"st,m41t00",
+	"microchip,mcp7940x",
+	"microchip,mcp7941x",
+	"pericom,pt7c4338",
+	"epson,rx8025",
+	"isil,isl12057"
+- reg: I2C bus address of the device
+
+Optional properties:
+- interrupt-parent: phandle for the interrupt controller.
+- interrupts: rtc alarm interrupt.
+- clock-output-names: From common clock binding to override the default output
+                      clock name
+- wakeup-source: Enables wake up of host system on alarm
+- trickle-resistor-ohms : ds1339, ds1340 and ds 1388 only
+	Selected resistor for trickle charger
+	Possible values are 250, 2000, 4000
+	Should be given if trickle charger should be enabled
+- trickle-diode-disable : ds1339, ds1340 and ds 1388 only
+	Do not use internal trickle charger diode
+	Should be given if internal trickle charger diode should be disabled
+
+Example:
+	rtc1: ds1339@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 0>;
+		trickle-resistor-ohms = <250>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
new file mode 100644
index 000000000000..717d93860af1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt
@@ -0,0 +1,31 @@
+ST M41T80 family of RTC and compatible
+
+Required properties:
+- compatible: should be one of:
+	"st,m41t62",
+	"st,m41t65",
+	"st,m41t80",
+	"st,m41t81",
+	"st,m41t81s",
+	"st,m41t82",
+	"st,m41t83",
+	"st,m41t84",
+	"st,m41t85",
+	"st,m41t87",
+	"microcrystal,rv4162",
+- reg: I2C bus address of the device
+
+Optional properties:
+- interrupt-parent: phandle for the interrupt controller.
+- interrupts: rtc alarm interrupt.
+- clock-output-names: From common clock binding to override the default output
+                      clock name
+- wakeup-source: Enables wake up of host system on alarm
+
+Example:
+	rtc@68 {
+		compatible = "st,m41t80";
+		reg = <0x68>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <0x9 0x8>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt
new file mode 100644
index 000000000000..58885b55da21
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt
@@ -0,0 +1,13 @@
+SiRFSoC Real Time Clock
+
+Required properties:
+- compatible: must be "sirf,prima2-sysrtc"
+- reg: address range of rtc register set.
+- interrupts: rtc alarm interrupts.
+
+Example:
+	rtc@2000 {
+		compatible = "sirf,prima2-sysrtc";
+		reg = <0x2000 0x1000>;
+		interrupts = <52 53 54>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
new file mode 100644
index 000000000000..3ebeb311335f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt
@@ -0,0 +1,17 @@
+ST-Ericsson COH 901 331 Real Time Clock
+
+Required properties:
+- compatible: must be "stericsson,coh901331"
+- reg: address range of rtc register set.
+- interrupt-parent: phandle for the interrupt controller.
+- interrupts: rtc alarm interrupt.
+- clocks: phandle to the rtc clock source
+
+Example:
+	rtc: rtc@c0017000 {
+		compatible = "stericsson,coh901331";
+		reg = <0xc0017000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <10>;
+		clocks = <&rtc_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
index d5e26d313f62..12c083c1140a 100644
--- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
@@ -17,7 +17,7 @@ Required properties for new device trees
 
 Example:
 
-rtc: rtc@01f00000 {
+rtc: rtc@1f00000 {
 	compatible = "allwinner,sun6i-a31-rtc";
 	reg = <0x01f00000 0x54>;
 	interrupts = <0 40 4>, <0 41 4>;
diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt
index 6983aad376c3..4a8d79c1cf08 100644
--- a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt
@@ -10,7 +10,7 @@ Required properties:
 
 Example:
 
-rtc: rtc@01c20d00 {
+rtc: rtc@1c20d00 {
 	compatible = "allwinner,sun4i-a10-rtc";
 	reg = <0x01c20d00 0x20>;
 	interrupts = <24>;
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt
index 60984260207b..09b1b05fa677 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt
@@ -18,7 +18,7 @@ par_io@1400 {
 	#size-cells = <0>;
 	device_type = "par_io";
 	num-ports = <7>;
-	ucc_pin@01 {
+	ucc_pin@1 {
 		......
 	};
 
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt
index ec6ee2e864a2..5bde8b98a8c9 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt
@@ -26,7 +26,7 @@ Required properties:
     interrupts.
 
 Example:
-     ucc_pin@01 {
+     ucc_pin@1 {
 	pio-map = <
 	/* port  pin  dir  open_drain  assignment  has_irq */
 		0  3  1  0  1  0 	/* TxD0 */
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
index 66e6265fb0aa..f7b00a7c0f68 100644
--- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -51,7 +51,7 @@ of valid identifiers for k2g.
 
 Example (K2G):
 --------------------
-	uart0: serial@02530c00 {
+	uart0: serial@2530c00 {
 		compatible = "ns16550a";
 		...
 		power-domains = <&k2g_pds 0x002c>;
diff --git a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt
index befd125d18bb..860fc0da39c0 100644
--- a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt
@@ -9,7 +9,7 @@ Required properties:
 
 Examples:
 
-	i2s0: xtfpga-i2s@0d080000 {
+	i2s0: xtfpga-i2s@d080000 {
 		#sound-dai-cells = <0>;
 		compatible = "cdns,xtfpga-i2s";
 		reg = <0x0d080000 0x40>;
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index 65979b205893..f5a14115b459 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -41,7 +41,7 @@ Required properties:
 
 Example:
 
-asrc: asrc@02034000 {
+asrc: asrc@2034000 {
 	compatible = "fsl,imx53-asrc";
 	reg = <0x02034000 0x4000>;
 	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index 21c401e2ccda..cacd18bb9ba6 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -48,7 +48,7 @@ Required properties:
 
 Example:
 
-esai: esai@02024000 {
+esai: esai@2024000 {
 	compatible = "fsl,imx35-esai";
 	reg = <0x02024000 0x4000>;
 	interrupts = <0 51 0x04>;
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index 0f97e54c3d43..38cfa7573441 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -39,7 +39,7 @@ Required properties:
 
 Example:
 
-spdif: spdif@02004000 {
+spdif: spdif@2004000 {
 	compatible = "fsl,imx35-spdif";
 	reg = <0x02004000 0x4000>;
 	interrupts = <0 52 0x04>;
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt
index b30a737e209e..2db4dcbee1b9 100644
--- a/Documentation/devicetree/bindings/sound/imx-audmux.txt
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt
@@ -22,7 +22,7 @@ Required properties of optional child nodes:
 
 Example:
 
-audmux@021d8000 {
+audmux@21d8000 {
 	compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 	reg = <0x021d8000 0x4000>;
 };
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
index 09e0e18591ae..bf100cd0d0f7 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -63,7 +63,7 @@ Optional SoC Specific Properties:
 
 Example:
 
-i2s0: i2s@03830000 {
+i2s0: i2s@3830000 {
 	compatible = "samsung,s5pv210-i2s";
 	reg = <0x03830000 0x100>;
 	dmas = <&pdma0 10
diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index 2d4e10deb6f4..66579bbd3294 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -62,7 +62,7 @@ Required properties for the following compatibles:
 				   block in the PRCM.
 
 Example:
-codec: codec@01c22c00 {
+codec: codec@1c22c00 {
 	#sound-dai-cells = <0>;
 	compatible = "allwinner,sun7i-a20-codec";
 	reg = <0x01c22c00 0x40>;
@@ -73,7 +73,7 @@ codec: codec@01c22c00 {
 	dma-names = "rx", "tx";
 };
 
-codec: codec@01c22c00 {
+codec: codec@1c22c00 {
 	#sound-dai-cells = <0>;
 	compatible = "allwinner,sun6i-a31-codec";
 	reg = <0x01c22c00 0x98>;
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index fc5da6080759..05d7135a8d2f 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -28,7 +28,7 @@ Required properties for the following compatibles:
 
 Example:
 
-i2s0: i2s@01c22400 {
+i2s0: i2s@1c22400 {
 	#sound-dai-cells = <0>;
 	compatible = "allwinner,sun4i-a10-i2s";
 	reg = <0x01c22400 0x400>;
diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
index 399b1b4bae22..2ca3d138528e 100644
--- a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
@@ -48,7 +48,7 @@ are similar to A33 using simple-card:
 			sound-dai = <&codec>;
 		};
 
-	soc@01c00000 {
+	soc@1c00000 {
 		[...]
 
 		audio-codec@1c22e00 {
diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
index 1b6e7c4e50ab..07356758bd91 100644
--- a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
+++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
@@ -10,7 +10,7 @@ Required properties if not a sub-node of the PRCM node:
 - reg: must contain the registers location and length
 
 Example:
-prcm: prcm@01f01400 {
+prcm: prcm@1f01400 {
 	codec_analog: codec-analog {
 		compatible = "allwinner,sun8i-a23-codec-analog";
 	};
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 70ee177901d3..0c64a209c2e9 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -31,7 +31,7 @@ Required properties:
 
 Example:
 
-spdif: spdif@01c21000 {
+spdif: spdif@1c21000 {
 	compatible = "allwinner,sun4i-a10-spdif";
 	reg = <0x01c21000 0x40>;
 	interrupts = <13>;
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
index b5a5ca4502f9..09231d7586b2 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
@@ -16,7 +16,7 @@ please check:
 	* dma/dma.txt
 
 Example:
-	spdif0: spdif0@0b004000 {
+	spdif0: spdif0@b004000 {
 		compatible = "zte,zx296702-spdif";
 		reg = <0x0b004000 0x1000>;
 		clocks = <&lsp0clk ZX296702_SPDIF0_DIV>;
diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
index 484bbff5337e..c75d604a8290 100644
--- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
@@ -12,7 +12,7 @@ Required properties:
 
 Example:
 
-spi1: spi@01c06000 {
+spi1: spi@1c06000 {
 	compatible = "allwinner,sun4i-a10-spi";
 	reg = <0x01c06000 0x1000>;
 	interrupts = <11>;
diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
index ab1811354cce..435a8e0731ac 100644
--- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
@@ -19,7 +19,7 @@ Optional properties:
 
 Example:
 
-spi1: spi@01c69000 {
+spi1: spi@1c69000 {
 	compatible = "allwinner,sun6i-a31-spi";
 	reg = <0x01c69000 0x1000>;
 	interrupts = <0 66 4>;
@@ -28,7 +28,7 @@ spi1: spi@01c69000 {
 	resets = <&ahb1_rst 21>;
 };
 
-spi0: spi@01c68000 {
+spi0: spi@1c68000 {
 	compatible = "allwinner,sun8i-h3-spi";
 	reg = <0x01c68000 0x1000>;
 	interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sram/samsung-sram.txt b/Documentation/devicetree/bindings/sram/samsung-sram.txt
index 6bc474b2b885..61a9bbed303d 100644
--- a/Documentation/devicetree/bindings/sram/samsung-sram.txt
+++ b/Documentation/devicetree/bindings/sram/samsung-sram.txt
@@ -19,7 +19,7 @@ found in Documentation/devicetree/bindings/sram/sram.txt
 
 Example:
 
-	sysram@02020000 {
+	sysram@2020000 {
 		compatible = "mmio-sram";
 		reg = <0x02020000 0x54000>;
 		#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
index 6bb92a1df753..d087f04a4d7f 100644
--- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt
+++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
@@ -47,7 +47,7 @@ This valid values for this argument are:
 
 Example
 -------
-sram-controller@01c00000 {
+sram-controller@1c00000 {
 	compatible = "allwinner,sun4i-a10-sram-controller";
 	reg = <0x01c00000 0x30>;
 	#address-cells = <1>;
@@ -68,7 +68,7 @@ sram-controller@01c00000 {
 	};
 };
 
-emac: ethernet@01c0b000 {
+emac: ethernet@1c0b000 {
 	compatible = "allwinner,sun4i-a10-emac";
 	...
 
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
index 8d6e4fd2468e..2c5c1be78360 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
@@ -14,7 +14,7 @@ Optional properties:
 
 Example:
 
-timer@01c60000 {
+timer@1c60000 {
 	compatible = "allwinner,sun7i-a20-hstimer";
 	reg = <0x01c60000 0x1000>;
 	interrupts = <0 51 1>,
diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt
index 8bcac6ee73da..27dce08edd73 100644
--- a/Documentation/devicetree/bindings/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/trivial-devices.txt
@@ -36,11 +36,9 @@ atmel,at97sc3204t	i2c trusted platform module (TPM)
 capella,cm32181		CM32181: Ambient Light Sensor
 capella,cm3232		CM3232: Ambient Light Sensor
 cirrus,cs42l51		Cirrus Logic CS42L51 audio codec
-dallas,ds1307		64 x 8, Serial, I2C Real-Time Clock
-dallas,ds1338		I2C RTC with 56-Byte NV RAM
-dallas,ds1340		I2C RTC with Trickle Charger
 dallas,ds1374		I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
 dallas,ds1631		High-Precision Digital Thermometer
+dallas,ds1672		Dallas DS1672 Real-time Clock
 dallas,ds1682		Total-Elapsed-Time Recorder with Alarm
 dallas,ds1775		Tiny Digital Thermometer and Thermostat
 dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
@@ -54,8 +52,8 @@ dlg,da9063		DA9063: system PMIC for quad-core application processors
 domintech,dmard09	DMARD09: 3-axis Accelerometer
 domintech,dmard10	DMARD10: 3-axis Accelerometer
 epson,rx8010		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
-epson,rx8025		High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
 epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+emmicro,em3027		EM Microelectronic EM3027 Real-time Clock
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
 fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma7660		MMA7660FC: 3-Axis Orientation/Motion Detection Sensor
@@ -67,6 +65,8 @@ gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire In
 infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
 infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
 isil,isl1208		Intersil ISL1208 Low Power RTC with Battery Backed SRAM
+isil,isl1218		Intersil ISL1218 Low Power RTC with Battery Backed SRAM
+isil,isl12022		Intersil ISL12022 Real-time Clock
 isil,isl29028		Intersil ISL29028 Ambient Light and Proximity Sensor
 isil,isl29030		Intersil ISL29030 Ambient Light and Proximity Sensor
 maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
@@ -156,6 +156,7 @@ nxp,pca9556		Octal SMBus and I2C registered interface
 nxp,pca9557		8-bit I2C-bus and SMBus I/O port with reset
 nxp,pcf2127		Real-time clock
 nxp,pcf2129		Real-time clock
+nxp,pcf8523		Real-time Clock
 nxp,pcf8563		Real-time clock/calendar
 nxp,pcf85063		Tiny Real-Time Clock
 oki,ml86v7667		OKI ML86V7667 video decoder
@@ -175,10 +176,6 @@ sii,s35390a		2-wire CMOS real-time clock
 silabs,si7020		Relative Humidity and Temperature Sensors
 skyworks,sky81452	Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
 st,24c256		i2c serial eeprom  (24cxx)
-st,m41t0		Serial real-time clock (RTC)
-st,m41t00		Serial real-time clock (RTC)
-st,m41t62		Serial real-time clock (RTC) with alarm
-st,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
 taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,ads7828		8-Channels, 12-bit ADC
 ti,ads7830		8-Channels, 8-bit ADC
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
index cb2bd83fa89a..50abb20fe319 100644
--- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
@@ -16,7 +16,7 @@ Required properties:
 
 Example:
 
-	usb_otg: usb@01c13000 {
+	usb_otg: usb@1c13000 {
 		compatible = "allwinner,sun4i-a10-musb";
 		reg = <0x01c13000 0x0400>;
 		clocks = <&ahb_gates 0>;
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index 16920d78e1b8..7a33f22c815a 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -181,7 +181,7 @@ usb: usb@47400000 {
 			"tx14", "tx15";
 	};
 
-	cppi41dma: dma-controller@07402000 {
+	cppi41dma: dma-controller@7402000 {
 		compatible = "ti,am3359-cppi41";
 		reg =  <0x47400000 0x1000
 			0x47402000 0x1000
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index ad8ea56a9ed3..44e80153b148 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -18,7 +18,7 @@ Required properties:
  - atmel,oc-gpio: If present, specifies a gpio that needs to be
    activated for the overcurrent detection.
 
-usb0: ohci@00500000 {
+usb0: ohci@500000 {
 	compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 	reg = <0x00500000 0x100000>;
 	clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
@@ -39,7 +39,7 @@ Required properties:
 		"ehci_clk" for the peripheral clock
 		"usb_clk" for the UTMI clock
 
-usb1: ehci@00800000 {
+usb1: ehci@800000 {
 	compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 	reg = <0x00800000 0x100000>;
 	interrupts = <22 4>;
diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
index 2dc8f67eda39..24a826d5015e 100644
--- a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
@@ -13,7 +13,7 @@ Optional properties:
 
 Example:
 
-ohci: usb@0225000 {
+ohci: usb@225000 {
         compatible = "ti,da830-ohci";
         reg = <0x225000 0x1000>;
         interrupts = <59>;
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index a12d6012a40f..3efde12b5d68 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -30,7 +30,7 @@ Example (Sequoia 440EPx):
    };
 
 Example (Allwinner sun4i A10 SoC):
-   ehci0: usb@01c14000 {
+   ehci0: usb@1c14000 {
 	   compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
 	   reg = <0x01c14000 0x100>;
 	   interrupts = <39>;
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index 5be01c859b7a..4dc6a8ee3071 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -2,6 +2,7 @@ USB NOP PHY
 
 Required properties:
 - compatible: should be usb-nop-xceiv
+- #phy-cells: Must be 0
 
 Optional properties:
 - clocks: phandle to the PHY clock. Use as per Documentation/devicetree
@@ -33,6 +34,7 @@ Example:
 		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		vbus-regulator = <&vbus_regulator>;
+		#phy-cells = <0>;
 	};
 
 hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index e8766b08c93b..09e70c875bc6 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -19,7 +19,7 @@ Optional properties:
 
 Example:
 
-	ohci0: usb@01c14400 {
+	ohci0: usb@1c14400 {
 		compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
 		reg = <0x01c14400 0x100>;
 		interrupts = <64>;
diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt
index c1a0a9191d26..057dd384d473 100644
--- a/Documentation/devicetree/bindings/usb/usb3503.txt
+++ b/Documentation/devicetree/bindings/usb/usb3503.txt
@@ -26,7 +26,7 @@ Optional properties:
 	clock frequencies table is used)
 
 Examples:
-	usb3503@08 {
+	usb3503@8 {
 		compatible = "smsc,usb3503";
 		reg = <0x08>;
 		connect-gpios = <&gpx3 0 1>;
diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
index f1e27faf528e..a85a631ec434 100644
--- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
+++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
@@ -10,7 +10,7 @@ Required properties:
 - reg: Should contain registers location and length
 
 Examples:
-usbmisc@02184800 {
+usbmisc@2184800 {
 	#index-cells = <1>;
 	compatible = "fsl,imx6q-usbmisc";
 	reg = <0x02184800 0x200>;
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 9f4c3dfbe49b..0f295a4798ad 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -83,6 +83,7 @@ davicom	DAVICOM Semiconductor, Inc.
 delta	Delta Electronics, Inc.
 denx	Denx Software Engineering
 devantech	Devantech, Ltd.
+dh	DH electronics GmbH
 digi	Digi International Inc.
 digilent	Diglent, Inc.
 dioo	Dioo Microcircuit Co., Ltd
@@ -230,12 +231,14 @@ netlogic	Broadcom Corporation (formerly NetLogic Microsystems)
 netron-dy	Netron DY
 netxeon		Shenzhen Netxeon Technology CO., LTD
 nexbox	Nexbox
+nextthing	Next Thing Co.
 newhaven	Newhaven Display International
 ni	National Instruments
 nintendo	Nintendo
 nlt	NLT Technologies, Ltd.
 nokia	Nokia
 nordic	Nordic Semiconductor
+nutsboard	NutsBoard
 nuvoton	Nuvoton Technology Corporation
 nvd	New Vision Display
 nvidia	NVIDIA
@@ -246,6 +249,7 @@ olimex	OLIMEX Ltd.
 onion	Onion Corporation
 onnn	ON Semiconductor Corp.
 ontat	On Tat Industrial Company
+opalkelly	Opal Kelly Incorporated
 opencores	OpenCores.org
 openrisc	OpenRISC.io
 option	Option NV
@@ -298,6 +302,7 @@ sensirion	Sensirion AG
 sff	Small Form Factor Committee
 sgx	SGX Sensortech
 sharp	Sharp Corporation
+shimafuji	Shimafuji Electric, Inc.
 si-en	Si-En Technology Ltd.
 sigma	Sigma Designs, Inc.
 sii	Seiko Instruments, Inc.
@@ -319,6 +324,7 @@ solomon        Solomon Systech Limited
 sony	Sony Corporation
 spansion	Spansion Inc.
 sprd	Spreadtrum Communications Inc.
+sst	Silicon Storage Technology, Inc.
 st	STMicroelectronics
 starry	Starry Electronic Technology (ShenZhen) Co., LTD
 startek	Startek
@@ -340,6 +346,7 @@ thine	THine Electronics, Inc.
 ti	Texas Instruments
 tianma	Tianma Micro-electronics Co., Ltd.
 tlm	Trusted Logic Mobility
+tmt	Tecon Microprocessor Technologies, LLC.
 topeet  Topeet
 toradex	Toradex AG
 toshiba	Toshiba Corporation
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 235de0683bb6..5b38a30e608c 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -13,7 +13,7 @@ Required properties:
 
 Example:
 
-wdt: watchdog@010000000 {
+wdt: watchdog@10000000 {
 	compatible = "mediatek,mt6589-wdt";
 	reg = <0x10000000 0x18>;
 };
diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
index b8f75c51453a..62dd5baad70e 100644
--- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
@@ -8,7 +8,7 @@ Required properties:
 
 Example:
 
-wdt: watchdog@01c20c90 {
+wdt: watchdog@1c20c90 {
 	compatible = "allwinner,sun4i-a10-wdt";
 	reg = <0x01c20c90 0x10>;
 };
diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
index eb7f2685fda1..c4aa0adf13ec 100644
--- a/Documentation/devicetree/overlay-notes.txt
+++ b/Documentation/devicetree/overlay-notes.txt
@@ -87,15 +87,15 @@ Overlay in-kernel API
 
 The API is quite easy to use.
 
-1. Call of_overlay_create() to create and apply an overlay. The return value
-is a cookie identifying this overlay.
+1. Call of_overlay_apply() to create and apply an overlay changeset. The return
+value is an error or a cookie identifying this overlay.
 
-2. Call of_overlay_destroy() to remove and cleanup the overlay previously
-created via the call to of_overlay_create(). Removal of an overlay that
-is stacked by another will not be permitted.
+2. Call of_overlay_remove() to remove and cleanup the overlay changeset
+previously created via the call to of_overlay_apply(). Removal of an overlay
+changeset that is stacked by another will not be permitted.
 
 Finally, if you need to remove all overlays in one-go, just call
-of_overlay_destroy_all() which will remove every single one in the correct
+of_overlay_remove_all() which will remove every single one in the correct
 order.
 
 Overlay DTS Format
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index f6f80380dff2..71e9feefb63c 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1158,7 +1158,6 @@ When kbuild executes, the following steps are followed (roughly):
 
 	Example:
 		targets += $(dtb-y)
-		clean-files += *.dtb
 		DTC_FLAGS ?= -p 1024
 
 --- 6.8 Custom kbuild commands
diff --git a/Makefile b/Makefile
index 7917d4a1d8d2..33cefc31124d 100644
--- a/Makefile
+++ b/Makefile
@@ -1550,7 +1550,7 @@ clean: $(clean-dirs)
 	$(call cmd,rmfiles)
 	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
 		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-		-o -name '*.ko.*' \
+		-o -name '*.ko.*' -o -name '*.dtb' -o -name '*.dtb.S' \
 		-o -name '*.dwo'  \
 		-o -name '*.su'  \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore
index 5246969a20c5..c4c5fd529c25 100644
--- a/arch/arc/boot/.gitignore
+++ b/arch/arc/boot/.gitignore
@@ -1,2 +1 @@
-*.dtb*
 uImage
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
index 83c9e076ef63..22a4c5d4702f 100644
--- a/arch/arc/boot/dts/Makefile
+++ b/arch/arc/boot/dts/Makefile
@@ -11,8 +11,6 @@ dtb-y := $(builtindtb-y).dtb
 
 .SECONDARY: $(obj)/$(builtindtb-y).dtb.S
 
-dtstree		:= $(srctree)/$(src)
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-
-always := $(dtb-y)
-clean-files := *.dtb  *.dtb.S
+# for CONFIG_OF_ALL_DTBS test
+dtstree	:= $(srctree)/$(src)
+dtb-	:= $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index 3c79f85975aa..ce1c5ff746e7 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -3,4 +3,3 @@ zImage
 xipImage
 bootpImage
 uImage
-*.dtb
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eff87a344566..25dcf4e534e6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1070,9 +1070,3 @@ dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
 	aspeed-bmc-opp-romulus.dtb \
 	aspeed-ast2500-evb.dtb
 endif
-
-dtstree		:= $(srctree)/$(src)
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-
-always		:= $(dtb-y)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/.gitignore b/arch/arm64/boot/dts/.gitignore
deleted file mode 100644
index b60ed208c779..000000000000
--- a/arch/arm64/boot/dts/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-*.dtb
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index c6684ab8e201..d7c22d51bc50 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,34 +1,26 @@
 # SPDX-License-Identifier: GPL-2.0
-dts-dirs += actions
-dts-dirs += al
-dts-dirs += allwinner
-dts-dirs += altera
-dts-dirs += amd
-dts-dirs += amlogic
-dts-dirs += apm
-dts-dirs += arm
-dts-dirs += broadcom
-dts-dirs += cavium
-dts-dirs += exynos
-dts-dirs += freescale
-dts-dirs += hisilicon
-dts-dirs += marvell
-dts-dirs += mediatek
-dts-dirs += nvidia
-dts-dirs += qcom
-dts-dirs += realtek
-dts-dirs += renesas
-dts-dirs += rockchip
-dts-dirs += socionext
-dts-dirs += sprd
-dts-dirs += xilinx
-dts-dirs += lg
-dts-dirs += zte
-
-subdir-y	:= $(dts-dirs)
-
-dtstree		:= $(srctree)/$(src)
-
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(foreach d,$(dts-dirs), $(wildcard $(dtstree)/$(d)/*.dts)))
-
-always		:= $(dtb-y)
+subdir-y += actions
+subdir-y += al
+subdir-y += allwinner
+subdir-y += altera
+subdir-y += amd
+subdir-y += amlogic
+subdir-y += apm
+subdir-y += arm
+subdir-y += broadcom
+subdir-y += cavium
+subdir-y += exynos
+subdir-y += freescale
+subdir-y += hisilicon
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += nvidia
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += socionext
+subdir-y += sprd
+subdir-y += xilinx
+subdir-y += lg
+subdir-y += zte
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile
index 62922d688ce3..cc4661256356 100644
--- a/arch/arm64/boot/dts/actions/Makefile
+++ b/arch/arm64/boot/dts/actions/Makefile
@@ -1,5 +1 @@
 dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/al/Makefile b/arch/arm64/boot/dts/al/Makefile
index 8a6cde4f9b23..036e387112ed 100644
--- a/arch/arm64/boot/dts/al/Makefile
+++ b/arch/arm64/boot/dts/al/Makefile
@@ -1,5 +1 @@
 dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v2-evp.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index ff35e184e422..7d3acb355ff3 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -9,7 +9,3 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
index d7a641698d77..68ba0882a8bb 100644
--- a/arch/arm64/boot/dts/altera/Makefile
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -1,5 +1 @@
 dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index f9963d63006d..6a6093064a32 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -2,7 +2,3 @@
 dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
 			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
 			husky.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 543416b8dff5..f84b83bb9809 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -20,7 +20,3 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile
index a10fbdb34229..55b5cdca13b8 100644
--- a/arch/arm64/boot/dts/apm/Makefile
+++ b/arch/arm64/boot/dts/apm/Makefile
@@ -1,7 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
 dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index 470378addca4..4256bae99925 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -3,7 +3,3 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 3df2db7f8878..2a2591ef1fee 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
 
-dts-dirs	+= northstar2
-dts-dirs	+= stingray
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
+subdir-y	+= northstar2
+subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/Makefile b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
index e01a1485b813..83736004336d 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/Makefile
+++ b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
@@ -1,6 +1,2 @@
 dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
 dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile
index 04bb302f3233..c4d06cffcb11 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/Makefile
+++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile
@@ -1,7 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/cavium/Makefile b/arch/arm64/boot/dts/cavium/Makefile
index 9f68c277302b..c178f7e06e18 100644
--- a/arch/arm64/boot/dts/cavium/Makefile
+++ b/arch/arm64/boot/dts/cavium/Makefile
@@ -1,7 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
 dtb-$(CONFIG_ARCH_THUNDER2) += thunder2-99xx.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 6914b2cbd397..e0a2facde6a2 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -3,7 +3,3 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos5433-tm2.dtb	\
 	exynos5433-tm2e.dtb	\
 	exynos7-espresso.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index dc02e82aba7c..86e18adb695a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -13,7 +13,3 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
- 
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index 521ed484a5d1..03d93f8ef8a9 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -5,7 +5,3 @@ dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
 dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
 dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
 dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/lg/Makefile b/arch/arm64/boot/dts/lg/Makefile
index e345b8e58efe..4c3959e24e1b 100644
--- a/arch/arm64/boot/dts/lg/Makefile
+++ b/arch/arm64/boot/dts/lg/Makefile
@@ -1,7 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb
 dtb-$(CONFIG_ARCH_LG1K) += lg1313-ref.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 5633676fa9d0..cb454beede55 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -10,7 +10,3 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 1d05d1824fa9..ac17f60f998c 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -5,7 +5,3 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 6bc0c6ab4b7f..676aa2f238d1 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -5,6 +5,3 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
 dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
-
-always		:= $(dtb-y)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index e7b25bee3f1e..55ec5ee7f7e8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,7 +6,3 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
index 8521e921e59a..6e2ae59a3745 100644
--- a/arch/arm64/boot/dts/realtek/Makefile
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -1,5 +1 @@
 dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index d417701640bd..6b282283f1bf 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -4,6 +4,3 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
-
-always		:= $(dtb-y)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 84801892ee61..ce2701e37d00 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -11,7 +11,3 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index 72dbe8acd9fd..d45441249cb5 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -5,6 +5,3 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld20-global.dtb \
 	uniphier-ld20-ref.dtb \
 	uniphier-pxs3-ref.dtb
-
-always		:= $(dtb-y)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index d7188be103c5..2bdc23804f40 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,7 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
 			sp9860g-1h10.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index ae16427f6a4a..a2d67084a514 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -1,5 +1 @@
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
index d86c4def6bc9..14a1cdfc1559 100644
--- a/arch/arm64/boot/dts/zte/Makefile
+++ b/arch/arm64/boot/dts/zte/Makefile
@@ -1,6 +1,2 @@
 dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296718-pcbox.dtb
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb
diff --git a/arch/c6x/boot/dts/Makefile b/arch/c6x/boot/dts/Makefile
index 7368838c6e71..b212d278ebc4 100644
--- a/arch/c6x/boot/dts/Makefile
+++ b/arch/c6x/boot/dts/Makefile
@@ -17,5 +17,3 @@ $(obj)/builtin.dtb: $(obj)/$(DTB).dtb
 	$(call if_changed,cp)
 
 $(obj)/linked_dtb.o: $(obj)/builtin.dtb
-
-clean-files := *.dtb
diff --git a/arch/cris/boot/dts/Makefile b/arch/cris/boot/dts/Makefile
index 3318c630caa2..118fe990a173 100644
--- a/arch/cris/boot/dts/Makefile
+++ b/arch/cris/boot/dts/Makefile
@@ -3,5 +3,3 @@ BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o
 ifneq ($(CONFIG_BUILTIN_DTB),"")
 obj-$(CONFIG_OF) += $(BUILTIN_DTB)
 endif
-
-clean-files := *.dtb.S
diff --git a/arch/h8300/boot/dts/Makefile b/arch/h8300/boot/dts/Makefile
index 14593b51b2b2..69fcd817892c 100644
--- a/arch/h8300/boot/dts/Makefile
+++ b/arch/h8300/boot/dts/Makefile
@@ -8,9 +8,3 @@ obj-y += $(BUILTIN_DTB)
 dtb-$(CONFIG_H8300H_SIM) := h8300h_sim.dtb
 dtb-$(CONFIG_H8S_SIM) := h8s_sim.dtb
 dtb-$(CONFIG_H8S_EDOSK2674) := edosk2674.dtb
-
-dtstree		:= $(srctree)/$(src)
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-
-always	    := $(dtb-y)
-clean-files := *.dtb.S *.dtb
diff --git a/arch/metag/boot/.gitignore b/arch/metag/boot/.gitignore
index 2d6c0c160884..6c662ddb909a 100644
--- a/arch/metag/boot/.gitignore
+++ b/arch/metag/boot/.gitignore
@@ -1,4 +1,3 @@
 vmlinux*
 uImage*
 ramdisk.*
-*.dtb*
diff --git a/arch/metag/boot/dts/Makefile b/arch/metag/boot/dts/Makefile
index ad5dde558db1..f0a180f62766 100644
--- a/arch/metag/boot/dts/Makefile
+++ b/arch/metag/boot/dts/Makefile
@@ -13,10 +13,4 @@ endif
 dtb-$(CONFIG_METAG_BUILTIN_DTB)	+= $(builtindtb-y).dtb
 obj-$(CONFIG_METAG_BUILTIN_DTB)	+= $(builtindtb-y).dtb.o
 
-dtstree		:= $(srctree)/$(src)
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-
 .SECONDARY: $(obj)/$(builtindtb-y).dtb.S
-
-always += $(dtb-y)
-clean-files += *.dtb *.dtb.S
diff --git a/arch/microblaze/boot/.gitignore b/arch/microblaze/boot/.gitignore
index bf0459186027..679502d64a97 100644
--- a/arch/microblaze/boot/.gitignore
+++ b/arch/microblaze/boot/.gitignore
@@ -1,3 +1,2 @@
-*.dtb
 linux.bin*
 simpleImage.*
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 47f94cc383b6..fd46385a4c97 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -35,4 +35,4 @@ $(obj)/simpleImage.%: vmlinux FORCE
 	$(call if_changed,strip)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
-clean-files += simpleImage.*.unstrip linux.bin.ub dts/*.dtb
+clean-files += simpleImage.*.unstrip linux.bin.ub
diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore
index d3962cd5ce0c..a73d6e2c4f64 100644
--- a/arch/mips/boot/.gitignore
+++ b/arch/mips/boot/.gitignore
@@ -5,4 +5,3 @@ zImage
 zImage.tmp
 calc_vmlinuz_load_addr
 uImage
-*.dtb
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index e0a4e939f843..e2c6f131c8eb 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,22 +1,15 @@
 # SPDX-License-Identifier: GPL-2.0
-dts-dirs	+= brcm
-dts-dirs	+= cavium-octeon
-dts-dirs	+= img
-dts-dirs	+= ingenic
-dts-dirs	+= lantiq
-dts-dirs	+= mti
-dts-dirs	+= netlogic
-dts-dirs	+= ni
-dts-dirs	+= pic32
-dts-dirs	+= qca
-dts-dirs	+= ralink
-dts-dirs	+= xilfpga
+subdir-y	+= brcm
+subdir-y	+= cavium-octeon
+subdir-y	+= img
+subdir-y	+= ingenic
+subdir-y	+= lantiq
+subdir-y	+= mti
+subdir-y	+= netlogic
+subdir-y	+= ni
+subdir-y	+= pic32
+subdir-y	+= qca
+subdir-y	+= ralink
+subdir-y	+= xilfpga
 
-obj-y		:= $(addsuffix /, $(dts-dirs))
-
-dtstree		:= $(srctree)/$(src)
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(foreach d,$(dts-dirs), $(wildcard $(dtstree)/$(d)/*.dts)))
-
-always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
-clean-files	:= *.dtb *.dtb.S
+obj-$(CONFIG_BUILTIN_DTB)	:= $(addsuffix /, $(subdir-y))
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index 9e09cc4556b3..09ba7e894bad 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -23,7 +23,6 @@ dtb-$(CONFIG_DT_NONE) += \
 	bcm63268-comtrend-vr-3032u.dtb \
 	bcm93384wvg.dtb \
 	bcm93384wvg_viper.dtb \
-	bcm96358nb4ser.dtb \
 	bcm96368mvwg.dtb \
 	bcm9ejtagprb.dtb \
 	bcm97125cbmb.dtb \
@@ -39,6 +38,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile
index 35300e091573..f5d01b31df50 100644
--- a/arch/mips/boot/dts/cavium-octeon/Makefile
+++ b/arch/mips/boot/dts/cavium-octeon/Makefile
@@ -5,6 +5,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
index 139bcd887b86..3eb2597a4d6c 100644
--- a/arch/mips/boot/dts/img/Makefile
+++ b/arch/mips/boot/dts/img/Makefile
@@ -6,6 +6,3 @@ obj-$(CONFIG_MACH_PISTACHIO)	+= pistachio_marduk.dtb.o
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
index 7798262570da..035769269cbc 100644
--- a/arch/mips/boot/dts/ingenic/Makefile
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -6,6 +6,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile
index 0c50e3246a63..00e2e540ed3f 100644
--- a/arch/mips/boot/dts/lantiq/Makefile
+++ b/arch/mips/boot/dts/lantiq/Makefile
@@ -5,6 +5,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
index 5ee06f73c348..480af498a9dd 100644
--- a/arch/mips/boot/dts/mti/Makefile
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -6,6 +6,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile
index 1cb2fdbd8949..2b99450d7433 100644
--- a/arch/mips/boot/dts/netlogic/Makefile
+++ b/arch/mips/boot/dts/netlogic/Makefile
@@ -9,6 +9,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/ni/Makefile b/arch/mips/boot/dts/ni/Makefile
index 66cfdffc51c2..6cd9c606f025 100644
--- a/arch/mips/boot/dts/ni/Makefile
+++ b/arch/mips/boot/dts/ni/Makefile
@@ -2,6 +2,3 @@ dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= 169445.dtb
 
 # Force kbuild to make empty built-in.o if necessary
 obj-					+= dummy.o
-
-always					:= $(dtb-y)
-clean-files				:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/pic32/Makefile b/arch/mips/boot/dts/pic32/Makefile
index a86ddd289cfd..a139a0fbd7b7 100644
--- a/arch/mips/boot/dts/pic32/Makefile
+++ b/arch/mips/boot/dts/pic32/Makefile
@@ -8,6 +8,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index eabd94eb59db..639adeac90af 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -8,6 +8,3 @@ dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
index a80eeeecf613..323c8bcfb602 100644
--- a/arch/mips/boot/dts/ralink/Makefile
+++ b/arch/mips/boot/dts/ralink/Makefile
@@ -10,6 +10,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/xilfpga/Makefile b/arch/mips/boot/dts/xilfpga/Makefile
index 498ac081e2fe..5d222c97db9e 100644
--- a/arch/mips/boot/dts/xilfpga/Makefile
+++ b/arch/mips/boot/dts/xilfpga/Makefile
@@ -5,6 +5,3 @@ obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o
-
-always				:= $(dtb-y)
-clean-files	:= *.dtb *.dtb.S
diff --git a/arch/nios2/boot/.gitignore b/arch/nios2/boot/.gitignore
index 109279ca5a4d..64386a8dedd8 100644
--- a/arch/nios2/boot/.gitignore
+++ b/arch/nios2/boot/.gitignore
@@ -1,2 +1 @@
-*.dtb
 vmImage
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index c899876320df..2ba23a679732 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile
@@ -53,7 +53,5 @@ $(obj)/%.dtb: $(src)/dts/%.dts FORCE
 
 $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
 
-clean-files := *.dtb
-
 install:
 	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/openrisc/boot/dts/Makefile b/arch/openrisc/boot/dts/Makefile
index 792ce7143c3a..17dd791a833f 100644
--- a/arch/openrisc/boot/dts/Makefile
+++ b/arch/openrisc/boot/dts/Makefile
@@ -6,6 +6,4 @@ BUILTIN_DTB :=
 endif
 obj-y += $(BUILTIN_DTB)
 
-clean-files := *.dtb.S
-
 #DTC_FLAGS ?= -p 1024
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 84774ccba1c2..f92d0530ceb1 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -18,7 +18,6 @@ otheros.bld
 uImage
 cuImage.*
 dtbImage.*
-*.dtb
 treeImage.*
 vmlinux.strip
 zImage
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 651974192c4d..08782f55b89f 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -440,7 +440,7 @@ zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 	zImage.miboot zImage.pmac zImage.pseries \
-	zImage.maple simpleImage.* otheros.bld *.dtb
+	zImage.maple simpleImage.* otheros.bld
 
 # clean up files cached by wrapper
 clean-kernel-base := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index e45b5f10645a..6e35780c5962 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -75,24 +75,17 @@ static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
 	return prop;
 }
 
-static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa,
-					       const char *path)
+static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
 {
 	struct device_node *dn;
-	char *name;
-
-	/* If parent node path is "/" advance path to NULL terminator to
-	 * prevent double leading slashs in full_name.
-	 */
-	if (!path[1])
-		path++;
+	const char *name;
 
 	dn = kzalloc(sizeof(*dn), GFP_KERNEL);
 	if (!dn)
 		return NULL;
 
-	name = (char *)ccwa + be32_to_cpu(ccwa->name_offset);
-	dn->full_name = kasprintf(GFP_KERNEL, "%s/%s", path, name);
+	name = (const char *)ccwa + be32_to_cpu(ccwa->name_offset);
+	dn->full_name = kstrdup(name, GFP_KERNEL);
 	if (!dn->full_name) {
 		kfree(dn);
 		return NULL;
@@ -148,7 +141,6 @@ struct device_node *dlpar_configure_connector(__be32 drc_index,
 	struct property *last_property = NULL;
 	struct cc_workarea *ccwa;
 	char *data_buf;
-	const char *parent_path = parent->full_name;
 	int cc_token;
 	int rc = -1;
 
@@ -182,7 +174,7 @@ struct device_node *dlpar_configure_connector(__be32 drc_index,
 			break;
 
 		case NEXT_SIBLING:
-			dn = dlpar_parse_cc_node(ccwa, parent_path);
+			dn = dlpar_parse_cc_node(ccwa);
 			if (!dn)
 				goto cc_error;
 
@@ -192,10 +184,7 @@ struct device_node *dlpar_configure_connector(__be32 drc_index,
 			break;
 
 		case NEXT_CHILD:
-			if (first_dn)
-				parent_path = last_dn->full_name;
-
-			dn = dlpar_parse_cc_node(ccwa, parent_path);
+			dn = dlpar_parse_cc_node(ccwa);
 			if (!dn)
 				goto cc_error;
 
@@ -226,7 +215,6 @@ struct device_node *dlpar_configure_connector(__be32 drc_index,
 
 		case PREV_PARENT:
 			last_dn = last_dn->parent;
-			parent_path = last_dn->parent->full_name;
 			break;
 
 		case CALL_AGAIN:
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 296c188fd5ca..f24d8159c9e1 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -33,7 +33,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist
 	if (!np)
 		goto out_err;
 
-	np->full_name = kstrdup(path, GFP_KERNEL);
+	np->full_name = kstrdup(kbasename(path), GFP_KERNEL);
 	if (!np->full_name)
 		goto out_err;
 
diff --git a/arch/sh/boot/dts/Makefile b/arch/sh/boot/dts/Makefile
index e5ce3a0de7f4..715def00a436 100644
--- a/arch/sh/boot/dts/Makefile
+++ b/arch/sh/boot/dts/Makefile
@@ -1,3 +1 @@
 obj-$(CONFIG_USE_BUILTIN_DTB) += $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_SOURCE)).dtb.o
-
-clean-files := *.dtb.S
diff --git a/arch/xtensa/boot/.gitignore b/arch/xtensa/boot/.gitignore
index be7655998b26..38177c7ebcab 100644
--- a/arch/xtensa/boot/.gitignore
+++ b/arch/xtensa/boot/.gitignore
@@ -1,3 +1,2 @@
 uImage
 zImage.redboot
-*.dtb
diff --git a/arch/xtensa/boot/dts/Makefile b/arch/xtensa/boot/dts/Makefile
index a15e241c9153..f8052ba5aea8 100644
--- a/arch/xtensa/boot/dts/Makefile
+++ b/arch/xtensa/boot/dts/Makefile
@@ -12,9 +12,6 @@ ifneq ($(CONFIG_BUILTIN_DTB),"")
 obj-$(CONFIG_OF) += $(BUILTIN_DTB)
 endif
 
-dtstree := $(srctree)/$(src)
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-
-always += $(dtb-y)
-clean-files += *.dtb *.dtb.S
-
+# for CONFIG_OF_ALL_DTBS test
+dtstree	:= $(srctree)/$(src)
+dtb-	:= $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 4b8ba2a75a4d..a36cf1bd07a9 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1571,7 +1571,7 @@ static int device_add_class_symlinks(struct device *dev)
 	int error;
 
 	if (of_node) {
-		error = sysfs_create_link(&dev->kobj, &of_node->kobj,"of_node");
+		error = sysfs_create_link(&dev->kobj, of_node_kobj(of_node), "of_node");
 		if (error)
 			dev_warn(dev, "Error %d creating of_node link\n",error);
 		/* An error here doesn't warrant bringing down the device */
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave_compat.c b/drivers/gpu/drm/tilcdc/tilcdc_slave_compat.c
index 623a9140493c..54025af534d4 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_slave_compat.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave_compat.c
@@ -145,7 +145,6 @@ static struct device_node * __init tilcdc_get_overlay(struct kfree_table *kft)
 		__dtb_tilcdc_slave_compat_begin;
 	static void *overlay_data;
 	struct device_node *overlay;
-	int ret;
 
 	if (!size) {
 		pr_warn("%s: No overlay data\n", __func__);
@@ -164,11 +163,6 @@ static struct device_node * __init tilcdc_get_overlay(struct kfree_table *kft)
 	}
 
 	of_node_set_flag(overlay, OF_DETACHED);
-	ret = of_resolve_phandles(overlay);
-	if (ret) {
-		pr_err("%s: Failed to resolve phandles: %d\n", __func__, ret);
-		return NULL;
-	}
 
 	return overlay;
 }
@@ -204,7 +198,7 @@ static void __init tilcdc_convert_slave_node(void)
 	/* For all memory needed for the overlay tree. This memory can
 	   be freed after the overlay has been applied. */
 	struct kfree_table kft;
-	int ret;
+	int ovcs_id, ret;
 
 	if (kfree_table_init(&kft))
 		return;
@@ -247,9 +241,11 @@ static void __init tilcdc_convert_slave_node(void)
 
 	tilcdc_node_disable(slave);
 
-	ret = of_overlay_create(overlay);
+	ovcs_id = 0;
+	ret = of_overlay_apply(overlay, &ovcs_id);
 	if (ret)
-		pr_err("%s: Creating overlay failed: %d\n", __func__, ret);
+		pr_err("%s: Applying overlay changeset failed: %d\n",
+			__func__, ret);
 	else
 		pr_info("%s: ti,tilcdc,slave node successfully converted\n",
 			__func__);
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index ba7b034b2b91..ad9a9578f9c4 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -46,10 +46,14 @@ config OF_EARLY_FLATTREE
 config OF_PROMTREE
 	bool
 
+config OF_KOBJ
+	def_bool SYSFS
+
 # Hardly any platforms need this.  It is safe to select, but only do so if you
 # need it.
 config OF_DYNAMIC
 	bool "Support for dynamic device trees" if OF_UNITTEST
+	select OF_KOBJ
 	help
 	  On some platforms, the device tree can be manipulated at runtime.
 	  While this option is selected automatically on such platforms, you
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 8f19d342eed8..63a4be62ce19 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y = base.o device.o platform.o property.o
+obj-$(CONFIG_OF_KOBJ) += kobj.o
 obj-$(CONFIG_OF_DYNAMIC) += dynamic.o
 obj-$(CONFIG_OF_FLATTREE) += fdt.o
 obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 63897531cd75..f2e649ff746f 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -95,108 +95,6 @@ int __weak of_node_to_nid(struct device_node *np)
 }
 #endif
 
-#ifndef CONFIG_OF_DYNAMIC
-static void of_node_release(struct kobject *kobj)
-{
-	/* Without CONFIG_OF_DYNAMIC, no nodes gets freed */
-}
-#endif /* CONFIG_OF_DYNAMIC */
-
-struct kobj_type of_node_ktype = {
-	.release = of_node_release,
-};
-
-static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj,
-				struct bin_attribute *bin_attr, char *buf,
-				loff_t offset, size_t count)
-{
-	struct property *pp = container_of(bin_attr, struct property, attr);
-	return memory_read_from_buffer(buf, count, &offset, pp->value, pp->length);
-}
-
-/* always return newly allocated name, caller must free after use */
-static const char *safe_name(struct kobject *kobj, const char *orig_name)
-{
-	const char *name = orig_name;
-	struct kernfs_node *kn;
-	int i = 0;
-
-	/* don't be a hero. After 16 tries give up */
-	while (i < 16 && (kn = sysfs_get_dirent(kobj->sd, name))) {
-		sysfs_put(kn);
-		if (name != orig_name)
-			kfree(name);
-		name = kasprintf(GFP_KERNEL, "%s#%i", orig_name, ++i);
-	}
-
-	if (name == orig_name) {
-		name = kstrdup(orig_name, GFP_KERNEL);
-	} else {
-		pr_warn("Duplicate name in %s, renamed to \"%s\"\n",
-			kobject_name(kobj), name);
-	}
-	return name;
-}
-
-int __of_add_property_sysfs(struct device_node *np, struct property *pp)
-{
-	int rc;
-
-	/* Important: Don't leak passwords */
-	bool secure = strncmp(pp->name, "security-", 9) == 0;
-
-	if (!IS_ENABLED(CONFIG_SYSFS))
-		return 0;
-
-	if (!of_kset || !of_node_is_attached(np))
-		return 0;
-
-	sysfs_bin_attr_init(&pp->attr);
-	pp->attr.attr.name = safe_name(&np->kobj, pp->name);
-	pp->attr.attr.mode = secure ? 0400 : 0444;
-	pp->attr.size = secure ? 0 : pp->length;
-	pp->attr.read = of_node_property_read;
-
-	rc = sysfs_create_bin_file(&np->kobj, &pp->attr);
-	WARN(rc, "error adding attribute %s to node %pOF\n", pp->name, np);
-	return rc;
-}
-
-int __of_attach_node_sysfs(struct device_node *np)
-{
-	const char *name;
-	struct kobject *parent;
-	struct property *pp;
-	int rc;
-
-	if (!IS_ENABLED(CONFIG_SYSFS))
-		return 0;
-
-	if (!of_kset)
-		return 0;
-
-	np->kobj.kset = of_kset;
-	if (!np->parent) {
-		/* Nodes without parents are new top level trees */
-		name = safe_name(&of_kset->kobj, "base");
-		parent = NULL;
-	} else {
-		name = safe_name(&np->parent->kobj, kbasename(np->full_name));
-		parent = &np->parent->kobj;
-	}
-	if (!name)
-		return -ENOMEM;
-	rc = kobject_add(&np->kobj, parent, "%s", name);
-	kfree(name);
-	if (rc)
-		return rc;
-
-	for_each_property_of_node(np, pp)
-		__of_add_property_sysfs(np, pp);
-
-	return 0;
-}
-
 void __init of_core_init(void)
 {
 	struct device_node *np;
@@ -760,7 +658,7 @@ struct device_node *of_get_child_by_name(const struct device_node *node,
 }
 EXPORT_SYMBOL(of_get_child_by_name);
 
-static struct device_node *__of_find_node_by_path(struct device_node *parent,
+struct device_node *__of_find_node_by_path(struct device_node *parent,
 						const char *path)
 {
 	struct device_node *child;
@@ -1504,22 +1402,6 @@ int __of_remove_property(struct device_node *np, struct property *prop)
 	return 0;
 }
 
-void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop)
-{
-	sysfs_remove_bin_file(&np->kobj, &prop->attr);
-	kfree(prop->attr.attr.name);
-}
-
-void __of_remove_property_sysfs(struct device_node *np, struct property *prop)
-{
-	if (!IS_ENABLED(CONFIG_SYSFS))
-		return;
-
-	/* at early boot, bail here and defer setup to of_init() */
-	if (of_kset && of_node_is_attached(np))
-		__of_sysfs_remove_bin_file(np, prop);
-}
-
 /**
  * of_remove_property - Remove a property from a node.
  *
@@ -1579,21 +1461,6 @@ int __of_update_property(struct device_node *np, struct property *newprop,
 	return 0;
 }
 
-void __of_update_property_sysfs(struct device_node *np, struct property *newprop,
-		struct property *oldprop)
-{
-	if (!IS_ENABLED(CONFIG_SYSFS))
-		return;
-
-	/* At early boot, bail out and defer setup to of_init() */
-	if (!of_kset)
-		return;
-
-	if (oldprop)
-		__of_sysfs_remove_bin_file(np, oldprop);
-	__of_add_property_sysfs(np, newprop);
-}
-
 /*
  * of_update_property - Update a property in a node, if the property does
  * not exist, add it.
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 301b6db2b48d..c454941b34ec 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -16,6 +16,11 @@
 
 #include "of_private.h"
 
+static struct device_node *kobj_to_device_node(struct kobject *kobj)
+{
+	return container_of(kobj, struct device_node, kobj);
+}
+
 /**
  * of_node_get() - Increment refcount of a node
  * @node:	Node to inc refcount, NULL is supported to simplify writing of
@@ -43,28 +48,6 @@ void of_node_put(struct device_node *node)
 }
 EXPORT_SYMBOL(of_node_put);
 
-void __of_detach_node_sysfs(struct device_node *np)
-{
-	struct property *pp;
-
-	if (!IS_ENABLED(CONFIG_SYSFS))
-		return;
-
-	BUG_ON(!of_node_is_initialized(np));
-	if (!of_kset)
-		return;
-
-	/* only remove properties if on sysfs */
-	if (of_node_is_attached(np)) {
-		for_each_property_of_node(np, pp)
-			__of_sysfs_remove_bin_file(np, pp);
-		kobject_del(&np->kobj);
-	}
-
-	/* finally remove the kobj_init ref */
-	of_node_put(np);
-}
-
 static BLOCKING_NOTIFIER_HEAD(of_reconfig_chain);
 
 int of_reconfig_notifier_register(struct notifier_block *nb)
@@ -315,6 +298,18 @@ int of_detach_node(struct device_node *np)
 }
 EXPORT_SYMBOL_GPL(of_detach_node);
 
+static void property_list_free(struct property *prop_list)
+{
+	struct property *prop, *next;
+
+	for (prop = prop_list; prop != NULL; prop = next) {
+		next = prop->next;
+		kfree(prop->name);
+		kfree(prop->value);
+		kfree(prop);
+	}
+}
+
 /**
  * of_node_release() - release a dynamically allocated node
  * @kref: kref element of the node to be released
@@ -324,7 +319,6 @@ EXPORT_SYMBOL_GPL(of_detach_node);
 void of_node_release(struct kobject *kobj)
 {
 	struct device_node *node = kobj_to_device_node(kobj);
-	struct property *prop = node->properties;
 
 	/* We should never be releasing nodes that haven't been detached. */
 	if (!of_node_check_flag(node, OF_DETACHED)) {
@@ -335,18 +329,9 @@ void of_node_release(struct kobject *kobj)
 	if (!of_node_check_flag(node, OF_DYNAMIC))
 		return;
 
-	while (prop) {
-		struct property *next = prop->next;
-		kfree(prop->name);
-		kfree(prop->value);
-		kfree(prop);
-		prop = next;
+	property_list_free(node->properties);
+	property_list_free(node->deadprops);
 
-		if (!prop) {
-			prop = node->deadprops;
-			node->deadprops = NULL;
-		}
-	}
 	kfree(node->full_name);
 	kfree(node->data);
 	kfree(node);
@@ -508,11 +493,12 @@ static void __of_changeset_entry_invert(struct of_changeset_entry *ce,
 	}
 }
 
-static void __of_changeset_entry_notify(struct of_changeset_entry *ce, bool revert)
+static int __of_changeset_entry_notify(struct of_changeset_entry *ce,
+		bool revert)
 {
 	struct of_reconfig_data rd;
 	struct of_changeset_entry ce_inverted;
-	int ret;
+	int ret = 0;
 
 	if (revert) {
 		__of_changeset_entry_invert(ce, &ce_inverted);
@@ -534,11 +520,12 @@ static void __of_changeset_entry_notify(struct of_changeset_entry *ce, bool reve
 	default:
 		pr_err("invalid devicetree changeset action: %i\n",
 			(int)ce->action);
-		return;
+		ret = -EINVAL;
 	}
 
 	if (ret)
 		pr_err("changeset notifier error @%pOF\n", ce->np);
+	return ret;
 }
 
 static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
@@ -672,32 +659,82 @@ void of_changeset_destroy(struct of_changeset *ocs)
 }
 EXPORT_SYMBOL_GPL(of_changeset_destroy);
 
-int __of_changeset_apply(struct of_changeset *ocs)
+/*
+ * Apply the changeset entries in @ocs.
+ * If apply fails, an attempt is made to revert the entries that were
+ * successfully applied.
+ *
+ * If multiple revert errors occur then only the final revert error is reported.
+ *
+ * Returns 0 on success, a negative error value in case of an error.
+ * If a revert error occurs, it is returned in *ret_revert.
+ */
+int __of_changeset_apply_entries(struct of_changeset *ocs, int *ret_revert)
 {
 	struct of_changeset_entry *ce;
-	int ret;
+	int ret, ret_tmp;
 
-	/* perform the rest of the work */
 	pr_debug("changeset: applying...\n");
 	list_for_each_entry(ce, &ocs->entries, node) {
 		ret = __of_changeset_entry_apply(ce);
 		if (ret) {
 			pr_err("Error applying changeset (%d)\n", ret);
-			list_for_each_entry_continue_reverse(ce, &ocs->entries, node)
-				__of_changeset_entry_revert(ce);
+			list_for_each_entry_continue_reverse(ce, &ocs->entries,
+							     node) {
+				ret_tmp = __of_changeset_entry_revert(ce);
+				if (ret_tmp)
+					*ret_revert = ret_tmp;
+			}
 			return ret;
 		}
 	}
-	pr_debug("changeset: applied, emitting notifiers.\n");
+
+	return 0;
+}
+
+/*
+ * Returns 0 on success, a negative error value in case of an error.
+ *
+ * If multiple changset entry notification errors occur then only the
+ * final notification error is reported.
+ */
+int __of_changeset_apply_notify(struct of_changeset *ocs)
+{
+	struct of_changeset_entry *ce;
+	int ret = 0, ret_tmp;
+
+	pr_debug("changeset: emitting notifiers.\n");
 
 	/* drop the global lock while emitting notifiers */
 	mutex_unlock(&of_mutex);
-	list_for_each_entry(ce, &ocs->entries, node)
-		__of_changeset_entry_notify(ce, 0);
+	list_for_each_entry(ce, &ocs->entries, node) {
+		ret_tmp = __of_changeset_entry_notify(ce, 0);
+		if (ret_tmp)
+			ret = ret_tmp;
+	}
 	mutex_lock(&of_mutex);
 	pr_debug("changeset: notifiers sent.\n");
 
-	return 0;
+	return ret;
+}
+
+/*
+ * Returns 0 on success, a negative error value in case of an error.
+ *
+ * If a changeset entry apply fails, an attempt is made to revert any
+ * previous entries in the changeset.  If any of the reverts fails,
+ * that failure is not reported.  Thus the state of the device tree
+ * is unknown if an apply error occurs.
+ */
+static int __of_changeset_apply(struct of_changeset *ocs)
+{
+	int ret, ret_revert = 0;
+
+	ret = __of_changeset_apply_entries(ocs, &ret_revert);
+	if (!ret)
+		ret = __of_changeset_apply_notify(ocs);
+
+	return ret;
 }
 
 /**
@@ -724,31 +761,74 @@ int of_changeset_apply(struct of_changeset *ocs)
 }
 EXPORT_SYMBOL_GPL(of_changeset_apply);
 
-int __of_changeset_revert(struct of_changeset *ocs)
+/*
+ * Revert the changeset entries in @ocs.
+ * If revert fails, an attempt is made to re-apply the entries that were
+ * successfully removed.
+ *
+ * If multiple re-apply errors occur then only the final apply error is
+ * reported.
+ *
+ * Returns 0 on success, a negative error value in case of an error.
+ * If an apply error occurs, it is returned in *ret_apply.
+ */
+int __of_changeset_revert_entries(struct of_changeset *ocs, int *ret_apply)
 {
 	struct of_changeset_entry *ce;
-	int ret;
+	int ret, ret_tmp;
 
 	pr_debug("changeset: reverting...\n");
 	list_for_each_entry_reverse(ce, &ocs->entries, node) {
 		ret = __of_changeset_entry_revert(ce);
 		if (ret) {
 			pr_err("Error reverting changeset (%d)\n", ret);
-			list_for_each_entry_continue(ce, &ocs->entries, node)
-				__of_changeset_entry_apply(ce);
+			list_for_each_entry_continue(ce, &ocs->entries, node) {
+				ret_tmp = __of_changeset_entry_apply(ce);
+				if (ret_tmp)
+					*ret_apply = ret_tmp;
+			}
 			return ret;
 		}
 	}
-	pr_debug("changeset: reverted, emitting notifiers.\n");
+
+	return 0;
+}
+
+/*
+ * If multiple changset entry notification errors occur then only the
+ * final notification error is reported.
+ */
+int __of_changeset_revert_notify(struct of_changeset *ocs)
+{
+	struct of_changeset_entry *ce;
+	int ret = 0, ret_tmp;
+
+	pr_debug("changeset: emitting notifiers.\n");
 
 	/* drop the global lock while emitting notifiers */
 	mutex_unlock(&of_mutex);
-	list_for_each_entry_reverse(ce, &ocs->entries, node)
-		__of_changeset_entry_notify(ce, 1);
+	list_for_each_entry_reverse(ce, &ocs->entries, node) {
+		ret_tmp = __of_changeset_entry_notify(ce, 1);
+		if (ret_tmp)
+			ret = ret_tmp;
+	}
 	mutex_lock(&of_mutex);
 	pr_debug("changeset: notifiers sent.\n");
 
-	return 0;
+	return ret;
+}
+
+static int __of_changeset_revert(struct of_changeset *ocs)
+{
+	int ret, ret_reply;
+
+	ret_reply = 0;
+	ret = __of_changeset_revert_entries(ocs, &ret_reply);
+
+	if (!ret)
+		ret = __of_changeset_revert_notify(ocs);
+
+	return ret;
 }
 
 /**
@@ -775,7 +855,7 @@ int of_changeset_revert(struct of_changeset *ocs)
 EXPORT_SYMBOL_GPL(of_changeset_revert);
 
 /**
- * of_changeset_action - Perform a changeset action
+ * of_changeset_action - Add an action to the tail of the changeset list
  *
  * @ocs:	changeset pointer
  * @action:	action to perform
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index ce30c9a588a4..4675e5ac4d11 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -132,6 +132,19 @@ bool of_fdt_is_big_endian(const void *blob, unsigned long node)
 	return false;
 }
 
+static bool of_fdt_device_is_available(const void *blob, unsigned long node)
+{
+	const char *status = fdt_getprop(blob, node, "status", NULL);
+
+	if (!status)
+		return true;
+
+	if (!strcmp(status, "ok") || !strcmp(status, "okay"))
+		return true;
+
+	return false;
+}
+
 /**
  * of_fdt_match - Return true if node matches a list of compatible values
  */
@@ -266,74 +279,32 @@ static void populate_properties(const void *blob,
 		*pprev = NULL;
 }
 
-static unsigned int populate_node(const void *blob,
-				  int offset,
-				  void **mem,
-				  struct device_node *dad,
-				  unsigned int fpsize,
-				  struct device_node **pnp,
-				  bool dryrun)
+static bool populate_node(const void *blob,
+			  int offset,
+			  void **mem,
+			  struct device_node *dad,
+			  struct device_node **pnp,
+			  bool dryrun)
 {
 	struct device_node *np;
 	const char *pathp;
 	unsigned int l, allocl;
-	int new_format = 0;
 
 	pathp = fdt_get_name(blob, offset, &l);
 	if (!pathp) {
 		*pnp = NULL;
-		return 0;
+		return false;
 	}
 
 	allocl = ++l;
 
-	/* version 0x10 has a more compact unit name here instead of the full
-	 * path. we accumulate the full path size using "fpsize", we'll rebuild
-	 * it later. We detect this because the first character of the name is
-	 * not '/'.
-	 */
-	if ((*pathp) != '/') {
-		new_format = 1;
-		if (fpsize == 0) {
-			/* root node: special case. fpsize accounts for path
-			 * plus terminating zero. root node only has '/', so
-			 * fpsize should be 2, but we want to avoid the first
-			 * level nodes to have two '/' so we use fpsize 1 here
-			 */
-			fpsize = 1;
-			allocl = 2;
-			l = 1;
-			pathp = "";
-		} else {
-			/* account for '/' and path size minus terminal 0
-			 * already in 'l'
-			 */
-			fpsize += l;
-			allocl = fpsize;
-		}
-	}
-
 	np = unflatten_dt_alloc(mem, sizeof(struct device_node) + allocl,
 				__alignof__(struct device_node));
 	if (!dryrun) {
 		char *fn;
 		of_node_init(np);
 		np->full_name = fn = ((char *)np) + sizeof(*np);
-		if (new_format) {
-			/* rebuild full path for new format */
-			if (dad && dad->parent) {
-				strcpy(fn, dad->full_name);
-#ifdef DEBUG
-				if ((strlen(fn) + l + 1) != allocl) {
-					pr_debug("%s: p: %d, l: %d, a: %d\n",
-						pathp, (int)strlen(fn),
-						l, allocl);
-				}
-#endif
-				fn += strlen(fn);
-			}
-			*(fn++) = '/';
-		}
+
 		memcpy(fn, pathp, l);
 
 		if (dad != NULL) {
@@ -355,7 +326,7 @@ static unsigned int populate_node(const void *blob,
 	}
 
 	*pnp = np;
-	return fpsize;
+	return true;
 }
 
 static void reverse_nodes(struct device_node *parent)
@@ -399,7 +370,6 @@ static int unflatten_dt_nodes(const void *blob,
 	struct device_node *root;
 	int offset = 0, depth = 0, initial_depth = 0;
 #define FDT_MAX_DEPTH	64
-	unsigned int fpsizes[FDT_MAX_DEPTH];
 	struct device_node *nps[FDT_MAX_DEPTH];
 	void *base = mem;
 	bool dryrun = !base;
@@ -418,7 +388,6 @@ static int unflatten_dt_nodes(const void *blob,
 		depth = initial_depth = 1;
 
 	root = dad;
-	fpsizes[depth] = dad ? strlen(of_node_full_name(dad)) : 0;
 	nps[depth] = dad;
 
 	for (offset = 0;
@@ -427,11 +396,12 @@ static int unflatten_dt_nodes(const void *blob,
 		if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH))
 			continue;
 
-		fpsizes[depth+1] = populate_node(blob, offset, &mem,
-						 nps[depth],
-						 fpsizes[depth],
-						 &nps[depth+1], dryrun);
-		if (!fpsizes[depth+1])
+		if (!IS_ENABLED(CONFIG_OF_KOBJ) &&
+		    !of_fdt_device_is_available(blob, offset))
+			continue;
+
+		if (!populate_node(blob, offset, &mem, nps[depth],
+				   &nps[depth+1], dryrun))
 			return mem - base;
 
 		if (!dryrun && nodepp && !*nodepp)
@@ -467,6 +437,7 @@ static int unflatten_dt_nodes(const void *blob,
  * @mynodes: The device_node tree created by the call
  * @dt_alloc: An allocator that provides a virtual address to memory
  * for the resulting tree
+ * @detached: if true set OF_DETACHED on @mynodes
  *
  * Returns NULL on failure or the memory chunk containing the unflattened
  * device tree on success.
@@ -652,7 +623,6 @@ static int __init __fdt_scan_reserved_mem(unsigned long node, const char *uname,
 					  int depth, void *data)
 {
 	static int found;
-	const char *status;
 	int err;
 
 	if (!found && depth == 1 && strcmp(uname, "reserved-memory") == 0) {
@@ -672,8 +642,7 @@ static int __init __fdt_scan_reserved_mem(unsigned long node, const char *uname,
 		return 1;
 	}
 
-	status = of_get_flat_dt_prop(node, "status", NULL);
-	if (status && strcmp(status, "okay") != 0 && strcmp(status, "ok") != 0)
+	if (!of_fdt_device_is_available(initial_boot_params, node))
 		return 0;
 
 	err = __reserved_mem_reserve_reg(node, uname);
diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c
new file mode 100644
index 000000000000..250fc7bb550f
--- /dev/null
+++ b/drivers/of/kobj.c
@@ -0,0 +1,164 @@
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#include "of_private.h"
+
+/* true when node is initialized */
+static int of_node_is_initialized(struct device_node *node)
+{
+	return node && node->kobj.state_initialized;
+}
+
+/* true when node is attached (i.e. present on sysfs) */
+int of_node_is_attached(struct device_node *node)
+{
+	return node && node->kobj.state_in_sysfs;
+}
+
+
+#ifndef CONFIG_OF_DYNAMIC
+static void of_node_release(struct kobject *kobj)
+{
+	/* Without CONFIG_OF_DYNAMIC, no nodes gets freed */
+}
+#endif /* CONFIG_OF_DYNAMIC */
+
+struct kobj_type of_node_ktype = {
+	.release = of_node_release,
+};
+
+static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr, char *buf,
+				loff_t offset, size_t count)
+{
+	struct property *pp = container_of(bin_attr, struct property, attr);
+	return memory_read_from_buffer(buf, count, &offset, pp->value, pp->length);
+}
+
+/* always return newly allocated name, caller must free after use */
+static const char *safe_name(struct kobject *kobj, const char *orig_name)
+{
+	const char *name = orig_name;
+	struct kernfs_node *kn;
+	int i = 0;
+
+	/* don't be a hero. After 16 tries give up */
+	while (i < 16 && (kn = sysfs_get_dirent(kobj->sd, name))) {
+		sysfs_put(kn);
+		if (name != orig_name)
+			kfree(name);
+		name = kasprintf(GFP_KERNEL, "%s#%i", orig_name, ++i);
+	}
+
+	if (name == orig_name) {
+		name = kstrdup(orig_name, GFP_KERNEL);
+	} else {
+		pr_warn("Duplicate name in %s, renamed to \"%s\"\n",
+			kobject_name(kobj), name);
+	}
+	return name;
+}
+
+int __of_add_property_sysfs(struct device_node *np, struct property *pp)
+{
+	int rc;
+
+	/* Important: Don't leak passwords */
+	bool secure = strncmp(pp->name, "security-", 9) == 0;
+
+	if (!IS_ENABLED(CONFIG_SYSFS))
+		return 0;
+
+	if (!of_kset || !of_node_is_attached(np))
+		return 0;
+
+	sysfs_bin_attr_init(&pp->attr);
+	pp->attr.attr.name = safe_name(&np->kobj, pp->name);
+	pp->attr.attr.mode = secure ? 0400 : 0444;
+	pp->attr.size = secure ? 0 : pp->length;
+	pp->attr.read = of_node_property_read;
+
+	rc = sysfs_create_bin_file(&np->kobj, &pp->attr);
+	WARN(rc, "error adding attribute %s to node %pOF\n", pp->name, np);
+	return rc;
+}
+
+void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop)
+{
+	if (!IS_ENABLED(CONFIG_SYSFS))
+		return;
+
+	sysfs_remove_bin_file(&np->kobj, &prop->attr);
+	kfree(prop->attr.attr.name);
+}
+
+void __of_remove_property_sysfs(struct device_node *np, struct property *prop)
+{
+	/* at early boot, bail here and defer setup to of_init() */
+	if (of_kset && of_node_is_attached(np))
+		__of_sysfs_remove_bin_file(np, prop);
+}
+
+void __of_update_property_sysfs(struct device_node *np, struct property *newprop,
+		struct property *oldprop)
+{
+	/* At early boot, bail out and defer setup to of_init() */
+	if (!of_kset)
+		return;
+
+	if (oldprop)
+		__of_sysfs_remove_bin_file(np, oldprop);
+	__of_add_property_sysfs(np, newprop);
+}
+
+int __of_attach_node_sysfs(struct device_node *np)
+{
+	const char *name;
+	struct kobject *parent;
+	struct property *pp;
+	int rc;
+
+	if (!of_kset)
+		return 0;
+
+	np->kobj.kset = of_kset;
+	if (!np->parent) {
+		/* Nodes without parents are new top level trees */
+		name = safe_name(&of_kset->kobj, "base");
+		parent = NULL;
+	} else {
+		name = safe_name(&np->parent->kobj, kbasename(np->full_name));
+		parent = &np->parent->kobj;
+	}
+	if (!name)
+		return -ENOMEM;
+	rc = kobject_add(&np->kobj, parent, "%s", name);
+	kfree(name);
+	if (rc)
+		return rc;
+
+	for_each_property_of_node(np, pp)
+		__of_add_property_sysfs(np, pp);
+
+	return 0;
+}
+
+void __of_detach_node_sysfs(struct device_node *np)
+{
+	struct property *pp;
+
+	BUG_ON(!of_node_is_initialized(np));
+	if (!of_kset)
+		return;
+
+	/* only remove properties if on sysfs */
+	if (of_node_is_attached(np)) {
+		for_each_property_of_node(np, pp)
+			__of_sysfs_remove_bin_file(np, pp);
+		kobject_del(&np->kobj);
+	}
+
+	/* finally remove the kobj_init ref */
+	of_node_put(np);
+}
+
diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
index 3ae12ffbf547..92a9a3687446 100644
--- a/drivers/of/of_private.h
+++ b/drivers/of/of_private.h
@@ -35,18 +35,16 @@ extern struct mutex of_mutex;
 extern struct list_head aliases_lookup;
 extern struct kset *of_kset;
 
-
-static inline struct device_node *kobj_to_device_node(struct kobject *kobj)
-{
-	return container_of(kobj, struct device_node, kobj);
-}
-
 #if defined(CONFIG_OF_DYNAMIC)
 extern int of_property_notify(int action, struct device_node *np,
 			      struct property *prop, struct property *old_prop);
 extern void of_node_release(struct kobject *kobj);
-extern int __of_changeset_apply(struct of_changeset *ocs);
-extern int __of_changeset_revert(struct of_changeset *ocs);
+extern int __of_changeset_apply_entries(struct of_changeset *ocs,
+					int *ret_revert);
+extern int __of_changeset_apply_notify(struct of_changeset *ocs);
+extern int __of_changeset_revert_entries(struct of_changeset *ocs,
+					 int *ret_apply);
+extern int __of_changeset_revert_notify(struct of_changeset *ocs);
 #else /* CONFIG_OF_DYNAMIC */
 static inline int of_property_notify(int action, struct device_node *np,
 				     struct property *prop, struct property *old_prop)
@@ -55,6 +53,41 @@ static inline int of_property_notify(int action, struct device_node *np,
 }
 #endif /* CONFIG_OF_DYNAMIC */
 
+#if defined(CONFIG_OF_KOBJ)
+int of_node_is_attached(struct device_node *node);
+int __of_add_property_sysfs(struct device_node *np, struct property *pp);
+void __of_remove_property_sysfs(struct device_node *np, struct property *prop);
+void __of_update_property_sysfs(struct device_node *np, struct property *newprop,
+		struct property *oldprop);
+int __of_attach_node_sysfs(struct device_node *np);
+void __of_detach_node_sysfs(struct device_node *np);
+#else
+static inline int __of_add_property_sysfs(struct device_node *np, struct property *pp)
+{
+	return 0;
+}
+static inline void __of_remove_property_sysfs(struct device_node *np, struct property *prop) {}
+static inline void __of_update_property_sysfs(struct device_node *np,
+		struct property *newprop, struct property *oldprop) {}
+static inline int __of_attach_node_sysfs(struct device_node *np)
+{
+	return 0;
+}
+static inline void __of_detach_node_sysfs(struct device_node *np) {}
+#endif
+
+#if defined(CONFIG_OF_RESOLVE)
+int of_resolve_phandles(struct device_node *tree);
+#endif
+
+#if defined(CONFIG_OF_OVERLAY)
+void of_overlay_mutex_lock(void);
+void of_overlay_mutex_unlock(void);
+#else
+static inline void of_overlay_mutex_lock(void) {};
+static inline void of_overlay_mutex_unlock(void) {};
+#endif
+
 #if defined(CONFIG_OF_UNITTEST) && defined(CONFIG_OF_OVERLAY)
 extern void __init unittest_unflatten_overlay_base(void);
 #else
@@ -77,6 +110,8 @@ extern void *__unflatten_device_tree(const void *blob,
 struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags);
 __printf(2, 3) struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, ...);
 
+struct device_node *__of_find_node_by_path(struct device_node *parent,
+						const char *path);
 struct device_node *__of_find_node_by_full_path(struct device_node *node,
 						const char *path);
 
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 8ecfee31ab6d..c150abb9049d 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -25,252 +25,378 @@
 #include "of_private.h"
 
 /**
- * struct of_overlay_info - Holds a single overlay info
+ * struct fragment - info about fragment nodes in overlay expanded device tree
  * @target:	target of the overlay operation
- * @overlay:	pointer to the overlay contents node
- *
- * Holds a single overlay state, including all the overlay logs &
- * records.
+ * @overlay:	pointer to the __overlay__ node
  */
-struct of_overlay_info {
+struct fragment {
 	struct device_node *target;
 	struct device_node *overlay;
-	bool is_symbols_node;
 };
 
 /**
- * struct of_overlay - Holds a complete overlay transaction
- * @node:	List on which we are located
- * @count:	Count of ovinfo structures
- * @ovinfo_tab:	Overlay info table (count sized)
- * @cset:	Changeset to be used
- *
- * Holds a complete overlay transaction
+ * struct overlay_changeset
+ * @ovcs_list:		list on which we are located
+ * @overlay_tree:	expanded device tree that contains the fragment nodes
+ * @count:		count of fragment structures
+ * @fragments:		fragment nodes in the overlay expanded device tree
+ * @symbols_fragment:	last element of @fragments[] is the  __symbols__ node
+ * @cset:		changeset to apply fragments to live device tree
  */
-struct of_overlay {
+struct overlay_changeset {
 	int id;
-	struct list_head node;
+	struct list_head ovcs_list;
+	struct device_node *overlay_tree;
 	int count;
-	struct of_overlay_info *ovinfo_tab;
+	struct fragment *fragments;
+	bool symbols_fragment;
 	struct of_changeset cset;
 };
 
-static int of_overlay_apply_one(struct of_overlay *ov,
-		struct device_node *target, const struct device_node *overlay,
-		bool is_symbols_node);
+/* flags are sticky - once set, do not reset */
+static int devicetree_state_flags;
+#define DTSF_APPLY_FAIL		0x01
+#define DTSF_REVERT_FAIL	0x02
 
-static BLOCKING_NOTIFIER_HEAD(of_overlay_chain);
+/*
+ * If a changeset apply or revert encounters an error, an attempt will
+ * be made to undo partial changes, but may fail.  If the undo fails
+ * we do not know the state of the devicetree.
+ */
+static int devicetree_corrupt(void)
+{
+	return devicetree_state_flags &
+		(DTSF_APPLY_FAIL | DTSF_REVERT_FAIL);
+}
+
+static int build_changeset_next_level(struct overlay_changeset *ovcs,
+		struct device_node *target_node,
+		const struct device_node *overlay_node);
+
+/*
+ * of_resolve_phandles() finds the largest phandle in the live tree.
+ * of_overlay_apply() may add a larger phandle to the live tree.
+ * Do not allow race between two overlays being applied simultaneously:
+ *    mutex_lock(&of_overlay_phandle_mutex)
+ *    of_resolve_phandles()
+ *    of_overlay_apply()
+ *    mutex_unlock(&of_overlay_phandle_mutex)
+ */
+static DEFINE_MUTEX(of_overlay_phandle_mutex);
+
+void of_overlay_mutex_lock(void)
+{
+	mutex_lock(&of_overlay_phandle_mutex);
+}
+
+void of_overlay_mutex_unlock(void)
+{
+	mutex_unlock(&of_overlay_phandle_mutex);
+}
+
+
+static LIST_HEAD(ovcs_list);
+static DEFINE_IDR(ovcs_idr);
+
+static BLOCKING_NOTIFIER_HEAD(overlay_notify_chain);
 
 int of_overlay_notifier_register(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_register(&of_overlay_chain, nb);
+	return blocking_notifier_chain_register(&overlay_notify_chain, nb);
 }
 EXPORT_SYMBOL_GPL(of_overlay_notifier_register);
 
 int of_overlay_notifier_unregister(struct notifier_block *nb)
 {
-	return blocking_notifier_chain_unregister(&of_overlay_chain, nb);
+	return blocking_notifier_chain_unregister(&overlay_notify_chain, nb);
 }
 EXPORT_SYMBOL_GPL(of_overlay_notifier_unregister);
 
-static int of_overlay_notify(struct of_overlay *ov,
-			     enum of_overlay_notify_action action)
+static char *of_overlay_action_name[] = {
+	"pre-apply",
+	"post-apply",
+	"pre-remove",
+	"post-remove",
+};
+
+static int overlay_notify(struct overlay_changeset *ovcs,
+		enum of_overlay_notify_action action)
 {
 	struct of_overlay_notify_data nd;
 	int i, ret;
 
-	for (i = 0; i < ov->count; i++) {
-		struct of_overlay_info *ovinfo = &ov->ovinfo_tab[i];
+	for (i = 0; i < ovcs->count; i++) {
+		struct fragment *fragment = &ovcs->fragments[i];
 
-		nd.target = ovinfo->target;
-		nd.overlay = ovinfo->overlay;
+		nd.target = fragment->target;
+		nd.overlay = fragment->overlay;
 
-		ret = blocking_notifier_call_chain(&of_overlay_chain,
+		ret = blocking_notifier_call_chain(&overlay_notify_chain,
 						   action, &nd);
-		if (ret)
-			return notifier_to_errno(ret);
+		if (ret == NOTIFY_OK || ret == NOTIFY_STOP)
+			return 0;
+		if (ret) {
+			ret = notifier_to_errno(ret);
+			pr_err("overlay changeset %s notifier error %d, target: %pOF\n",
+			       of_overlay_action_name[action], ret, nd.target);
+			return ret;
+		}
 	}
 
 	return 0;
 }
 
-static struct property *dup_and_fixup_symbol_prop(struct of_overlay *ov,
-		const struct property *prop)
+/*
+ * The values of properties in the "/__symbols__" node are paths in
+ * the ovcs->overlay_tree.  When duplicating the properties, the paths
+ * need to be adjusted to be the correct path for the live device tree.
+ *
+ * The paths refer to a node in the subtree of a fragment node's "__overlay__"
+ * node, for example "/fragment@0/__overlay__/symbol_path_tail",
+ * where symbol_path_tail can be a single node or it may be a multi-node path.
+ *
+ * The duplicated property value will be modified by replacing the
+ * "/fragment_name/__overlay/" portion of the value  with the target
+ * path from the fragment node.
+ */
+static struct property *dup_and_fixup_symbol_prop(
+		struct overlay_changeset *ovcs, const struct property *prop)
 {
-	struct of_overlay_info *ovinfo;
-	struct property *new;
-	const char *overlay_name;
-	char *label_path;
-	char *symbol_path;
+	struct fragment *fragment;
+	struct property *new_prop;
+	struct device_node *fragment_node;
+	struct device_node *overlay_node;
+	const char *path;
+	const char *path_tail;
 	const char *target_path;
 	int k;
-	int label_path_len;
 	int overlay_name_len;
+	int path_len;
+	int path_tail_len;
 	int target_path_len;
 
 	if (!prop->value)
 		return NULL;
-	symbol_path = prop->value;
-
-	new = kzalloc(sizeof(*new), GFP_KERNEL);
-	if (!new)
+	if (strnlen(prop->value, prop->length) >= prop->length)
 		return NULL;
+	path = prop->value;
+	path_len = strlen(path);
 
-	for (k = 0; k < ov->count; k++) {
-		ovinfo = &ov->ovinfo_tab[k];
-		overlay_name = ovinfo->overlay->full_name;
-		overlay_name_len = strlen(overlay_name);
-		if (!strncasecmp(symbol_path, overlay_name, overlay_name_len))
+	if (path_len < 1)
+		return NULL;
+	fragment_node = __of_find_node_by_path(ovcs->overlay_tree, path + 1);
+	overlay_node = __of_find_node_by_path(fragment_node, "__overlay__/");
+	of_node_put(fragment_node);
+	of_node_put(overlay_node);
+
+	for (k = 0; k < ovcs->count; k++) {
+		fragment = &ovcs->fragments[k];
+		if (fragment->overlay == overlay_node)
 			break;
 	}
+	if (k >= ovcs->count)
+		return NULL;
 
-	if (k >= ov->count)
-		goto err_free;
+	overlay_name_len = snprintf(NULL, 0, "%pOF", fragment->overlay);
 
-	target_path = ovinfo->target->full_name;
+	if (overlay_name_len > path_len)
+		return NULL;
+	path_tail = path + overlay_name_len;
+	path_tail_len = strlen(path_tail);
+
+	target_path = kasprintf(GFP_KERNEL, "%pOF", fragment->target);
+	if (!target_path)
+		return NULL;
 	target_path_len = strlen(target_path);
 
-	label_path = symbol_path + overlay_name_len;
-	label_path_len = strlen(label_path);
+	new_prop = kzalloc(sizeof(*new_prop), GFP_KERNEL);
+	if (!new_prop)
+		goto err_free_target_path;
 
-	new->name = kstrdup(prop->name, GFP_KERNEL);
-	new->length = target_path_len + label_path_len + 1;
-	new->value = kzalloc(new->length, GFP_KERNEL);
+	new_prop->name = kstrdup(prop->name, GFP_KERNEL);
+	new_prop->length = target_path_len + path_tail_len + 1;
+	new_prop->value = kzalloc(new_prop->length, GFP_KERNEL);
+	if (!new_prop->name || !new_prop->value)
+		goto err_free_new_prop;
 
-	if (!new->name || !new->value)
-		goto err_free;
+	strcpy(new_prop->value, target_path);
+	strcpy(new_prop->value + target_path_len, path_tail);
 
-	strcpy(new->value, target_path);
-	strcpy(new->value + target_path_len, label_path);
+	of_property_set_flag(new_prop, OF_DYNAMIC);
 
-	/* mark the property as dynamic */
-	of_property_set_flag(new, OF_DYNAMIC);
+	return new_prop;
 
-	return new;
+err_free_new_prop:
+	kfree(new_prop->name);
+	kfree(new_prop->value);
+	kfree(new_prop);
+err_free_target_path:
+	kfree(target_path);
 
- err_free:
-	kfree(new->name);
-	kfree(new->value);
-	kfree(new);
 	return NULL;
-
-
 }
 
-static int of_overlay_apply_single_property(struct of_overlay *ov,
-		struct device_node *target, struct property *prop,
-		bool is_symbols_node)
+/**
+ * add_changeset_property() - add @overlay_prop to overlay changeset
+ * @ovcs:		overlay changeset
+ * @target_node:	where to place @overlay_prop in live tree
+ * @overlay_prop:	property to add or update, from overlay tree
+ * @is_symbols_prop:	1 if @overlay_prop is from node "/__symbols__"
+ *
+ * If @overlay_prop does not already exist in @target_node, add changeset entry
+ * to add @overlay_prop in @target_node, else add changeset entry to update
+ * value of @overlay_prop.
+ *
+ * Some special properties are not updated (no error returned).
+ *
+ * Update of property in symbols node is not allowed.
+ *
+ * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
+ * invalid @overlay.
+ */
+static int add_changeset_property(struct overlay_changeset *ovcs,
+		struct device_node *target_node,
+		struct property *overlay_prop,
+		bool is_symbols_prop)
 {
-	struct property *propn = NULL, *tprop;
+	struct property *new_prop = NULL, *prop;
+	int ret = 0;
 
-	/* NOTE: Multiple changes of single properties not supported */
-	tprop = of_find_property(target, prop->name, NULL);
+	prop = of_find_property(target_node, overlay_prop->name, NULL);
 
-	/* special properties are not meant to be updated (silent NOP) */
-	if (of_prop_cmp(prop->name, "name") == 0 ||
-	    of_prop_cmp(prop->name, "phandle") == 0 ||
-	    of_prop_cmp(prop->name, "linux,phandle") == 0)
+	if (!of_prop_cmp(overlay_prop->name, "name") ||
+	    !of_prop_cmp(overlay_prop->name, "phandle") ||
+	    !of_prop_cmp(overlay_prop->name, "linux,phandle"))
 		return 0;
 
-	if (is_symbols_node) {
-		/* changing a property in __symbols__ node not allowed */
-		if (tprop)
+	if (is_symbols_prop) {
+		if (prop)
 			return -EINVAL;
-		propn = dup_and_fixup_symbol_prop(ov, prop);
+		new_prop = dup_and_fixup_symbol_prop(ovcs, overlay_prop);
 	} else {
-		propn = __of_prop_dup(prop, GFP_KERNEL);
+		new_prop = __of_prop_dup(overlay_prop, GFP_KERNEL);
 	}
 
-	if (propn == NULL)
+	if (!new_prop)
 		return -ENOMEM;
 
-	/* not found? add */
-	if (tprop == NULL)
-		return of_changeset_add_property(&ov->cset, target, propn);
+	if (!prop)
+		ret = of_changeset_add_property(&ovcs->cset, target_node,
+						new_prop);
+	else
+		ret = of_changeset_update_property(&ovcs->cset, target_node,
+						   new_prop);
 
-	/* found? update */
-	return of_changeset_update_property(&ov->cset, target, propn);
+	if (ret) {
+		kfree(new_prop->name);
+		kfree(new_prop->value);
+		kfree(new_prop);
+	}
+	return ret;
 }
 
-static int of_overlay_apply_single_device_node(struct of_overlay *ov,
-		struct device_node *target, struct device_node *child)
+/**
+ * add_changeset_node() - add @node (and children) to overlay changeset
+ * @ovcs:		overlay changeset
+ * @target_node:	where to place @node in live tree
+ * @node:		node from within overlay device tree fragment
+ *
+ * If @node does not already exist in @target_node, add changeset entry
+ * to add @node in @target_node.
+ *
+ * If @node already exists in @target_node, and the existing node has
+ * a phandle, the overlay node is not allowed to have a phandle.
+ *
+ * If @node has child nodes, add the children recursively via
+ * build_changeset_next_level().
+ *
+ * NOTE: Multiple mods of created nodes not supported.
+ *       If more than one fragment contains a node that does not already exist
+ *       in the live tree, then for each fragment of_changeset_attach_node()
+ *       will add a changeset entry to add the node.  When the changeset is
+ *       applied, __of_attach_node() will attach the node twice (once for
+ *       each fragment).  At this point the device tree will be corrupted.
+ *
+ *       TODO: add integrity check to ensure that multiple fragments do not
+ *             create the same node.
+ *
+ * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
+ * invalid @overlay.
+ */
+static int add_changeset_node(struct overlay_changeset *ovcs,
+		struct device_node *target_node, struct device_node *node)
 {
-	const char *cname;
+	const char *node_kbasename;
 	struct device_node *tchild;
 	int ret = 0;
 
-	cname = kbasename(child->full_name);
-	if (cname == NULL)
-		return -ENOMEM;
+	node_kbasename = kbasename(node->full_name);
 
-	/* NOTE: Multiple mods of created nodes not supported */
-	for_each_child_of_node(target, tchild)
-		if (!of_node_cmp(cname, kbasename(tchild->full_name)))
+	for_each_child_of_node(target_node, tchild)
+		if (!of_node_cmp(node_kbasename, kbasename(tchild->full_name)))
 			break;
 
-	if (tchild != NULL) {
-		/* new overlay phandle value conflicts with existing value */
-		if (child->phandle)
-			return -EINVAL;
-
-		/* apply overlay recursively */
-		ret = of_overlay_apply_one(ov, tchild, child, 0);
-		of_node_put(tchild);
-	} else {
-		/* create empty tree as a target */
-		tchild = __of_node_dup(child, "%pOF/%s", target, cname);
+	if (!tchild) {
+		tchild = __of_node_dup(node, "%pOF/%s",
+				       target_node, node_kbasename);
 		if (!tchild)
 			return -ENOMEM;
 
-		/* point to parent */
-		tchild->parent = target;
+		tchild->parent = target_node;
 
-		ret = of_changeset_attach_node(&ov->cset, tchild);
+		ret = of_changeset_attach_node(&ovcs->cset, tchild);
 		if (ret)
 			return ret;
 
-		ret = of_overlay_apply_one(ov, tchild, child, 0);
-		if (ret)
-			return ret;
+		return build_changeset_next_level(ovcs, tchild, node);
 	}
 
+	if (node->phandle && tchild->phandle)
+		ret = -EINVAL;
+	else
+		ret = build_changeset_next_level(ovcs, tchild, node);
+	of_node_put(tchild);
+
 	return ret;
 }
 
-/*
- * Apply a single overlay node recursively.
+/**
+ * build_changeset_next_level() - add level of overlay changeset
+ * @ovcs:		overlay changeset
+ * @target_node:	where to place @overlay_node in live tree
+ * @overlay_node:	node from within an overlay device tree fragment
  *
- * Note that the in case of an error the target node is left
- * in a inconsistent state. Error recovery should be performed
- * by using the changeset.
+ * Add the properties (if any) and nodes (if any) from @overlay_node to the
+ * @ovcs->cset changeset.  If an added node has child nodes, they will
+ * be added recursively.
+ *
+ * Do not allow symbols node to have any children.
+ *
+ * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
+ * invalid @overlay_node.
  */
-static int of_overlay_apply_one(struct of_overlay *ov,
-		struct device_node *target, const struct device_node *overlay,
-		bool is_symbols_node)
+static int build_changeset_next_level(struct overlay_changeset *ovcs,
+		struct device_node *target_node,
+		const struct device_node *overlay_node)
 {
 	struct device_node *child;
 	struct property *prop;
 	int ret;
 
-	for_each_property_of_node(overlay, prop) {
-		ret = of_overlay_apply_single_property(ov, target, prop,
-						       is_symbols_node);
+	for_each_property_of_node(overlay_node, prop) {
+		ret = add_changeset_property(ovcs, target_node, prop, 0);
 		if (ret) {
-			pr_err("Failed to apply prop @%pOF/%s\n",
-			       target, prop->name);
+			pr_debug("Failed to apply prop @%pOF/%s, err=%d\n",
+				 target_node, prop->name, ret);
 			return ret;
 		}
 	}
 
-	/* do not allow symbols node to have any children */
-	if (is_symbols_node)
-		return 0;
-
-	for_each_child_of_node(overlay, child) {
-		ret = of_overlay_apply_single_device_node(ov, target, child);
-		if (ret != 0) {
-			pr_err("Failed to apply single node @%pOF/%s\n",
-			       target, child->name);
+	for_each_child_of_node(overlay_node, child) {
+		ret = add_changeset_node(ovcs, target_node, child);
+		if (ret) {
+			pr_debug("Failed to apply node @%pOF/%s, err=%d\n",
+				 target_node, child->name, ret);
 			of_node_put(child);
 			return ret;
 		}
@@ -279,28 +405,72 @@ static int of_overlay_apply_one(struct of_overlay *ov,
 	return 0;
 }
 
-/**
- * of_overlay_apply() - Apply @count overlays pointed at by @ovinfo_tab
- * @ov:		Overlay to apply
- *
- * Applies the overlays given, while handling all error conditions
- * appropriately. Either the operation succeeds, or if it fails the
- * live tree is reverted to the state before the attempt.
- * Returns 0, or an error if the overlay attempt failed.
+/*
+ * Add the properties from __overlay__ node to the @ovcs->cset changeset.
  */
-static int of_overlay_apply(struct of_overlay *ov)
+static int build_changeset_symbols_node(struct overlay_changeset *ovcs,
+		struct device_node *target_node,
+		const struct device_node *overlay_symbols_node)
 {
-	int i, err;
+	struct property *prop;
+	int ret;
 
-	/* first we apply the overlays atomically */
-	for (i = 0; i < ov->count; i++) {
-		struct of_overlay_info *ovinfo = &ov->ovinfo_tab[i];
+	for_each_property_of_node(overlay_symbols_node, prop) {
+		ret = add_changeset_property(ovcs, target_node, prop, 1);
+		if (ret) {
+			pr_debug("Failed to apply prop @%pOF/%s, err=%d\n",
+				 target_node, prop->name, ret);
+			return ret;
+		}
+	}
 
-		err = of_overlay_apply_one(ov, ovinfo->target, ovinfo->overlay,
-					   ovinfo->is_symbols_node);
-		if (err != 0) {
-			pr_err("apply failed '%pOF'\n", ovinfo->target);
-			return err;
+	return 0;
+}
+
+/**
+ * build_changeset() - populate overlay changeset in @ovcs from @ovcs->fragments
+ * @ovcs:	Overlay changeset
+ *
+ * Create changeset @ovcs->cset to contain the nodes and properties of the
+ * overlay device tree fragments in @ovcs->fragments[].  If an error occurs,
+ * any portions of the changeset that were successfully created will remain
+ * in @ovcs->cset.
+ *
+ * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
+ * invalid overlay in @ovcs->fragments[].
+ */
+static int build_changeset(struct overlay_changeset *ovcs)
+{
+	struct fragment *fragment;
+	int fragments_count, i, ret;
+
+	/*
+	 * if there is a symbols fragment in ovcs->fragments[i] it is
+	 * the final element in the array
+	 */
+	if (ovcs->symbols_fragment)
+		fragments_count = ovcs->count - 1;
+	else
+		fragments_count = ovcs->count;
+
+	for (i = 0; i < fragments_count; i++) {
+		fragment = &ovcs->fragments[i];
+
+		ret = build_changeset_next_level(ovcs, fragment->target,
+						 fragment->overlay);
+		if (ret) {
+			pr_debug("apply failed '%pOF'\n", fragment->target);
+			return ret;
+		}
+	}
+
+	if (ovcs->symbols_fragment) {
+		fragment = &ovcs->fragments[ovcs->count - 1];
+		ret = build_changeset_symbols_node(ovcs, fragment->target,
+						   fragment->overlay);
+		if (ret) {
+			pr_debug("apply failed '%pOF'\n", fragment->target);
+			return ret;
 		}
 	}
 
@@ -309,10 +479,10 @@ static int of_overlay_apply(struct of_overlay *ov)
 
 /*
  * Find the target node using a number of different strategies
- * in order of preference
+ * in order of preference:
  *
- * "target" property containing the phandle of the target
- * "target-path" property containing the path of the target
+ * 1) "target" property containing the phandle of the target
+ * 2) "target-path" property containing the path of the target
  */
 static struct device_node *find_target_node(struct device_node *info_node)
 {
@@ -320,14 +490,12 @@ static struct device_node *find_target_node(struct device_node *info_node)
 	u32 val;
 	int ret;
 
-	/* first try to go by using the target as a phandle */
 	ret = of_property_read_u32(info_node, "target", &val);
-	if (ret == 0)
+	if (!ret)
 		return of_find_node_by_phandle(val);
 
-	/* now try to locate by path */
 	ret = of_property_read_string(info_node, "target-path", &path);
-	if (ret == 0)
+	if (!ret)
 		return of_find_node_by_path(path);
 
 	pr_err("Failed to find target for node %p (%s)\n",
@@ -337,228 +505,290 @@ static struct device_node *find_target_node(struct device_node *info_node)
 }
 
 /**
- * of_fill_overlay_info() - Fill an overlay info structure
- * @ov		Overlay to fill
- * @info_node:	Device node containing the overlay
- * @ovinfo:	Pointer to the overlay info structure to fill
+ * init_overlay_changeset() - initialize overlay changeset from overlay tree
+ * @ovcs	Overlay changeset to build
+ * @tree:	Contains all the overlay fragments and overlay fixup nodes
  *
- * Fills an overlay info structure with the overlay information
- * from a device node. This device node must have a target property
- * which contains a phandle of the overlay target node, and an
- * __overlay__ child node which has the overlay contents.
- * Both ovinfo->target & ovinfo->overlay have their references taken.
+ * Initialize @ovcs.  Populate @ovcs->fragments with node information from
+ * the top level of @tree.  The relevant top level nodes are the fragment
+ * nodes and the __symbols__ node.  Any other top level node will be ignored.
  *
- * Returns 0 on success, or a negative error value.
+ * Returns 0 on success, -ENOMEM if memory allocation failure, -EINVAL if error
+ * detected in @tree, or -ENOSPC if idr_alloc() error.
  */
-static int of_fill_overlay_info(struct of_overlay *ov,
-		struct device_node *info_node, struct of_overlay_info *ovinfo)
-{
-	ovinfo->overlay = of_get_child_by_name(info_node, "__overlay__");
-	if (ovinfo->overlay == NULL)
-		goto err_fail;
-
-	ovinfo->target = find_target_node(info_node);
-	if (ovinfo->target == NULL)
-		goto err_fail;
-
-	return 0;
-
-err_fail:
-	of_node_put(ovinfo->target);
-	of_node_put(ovinfo->overlay);
-
-	memset(ovinfo, 0, sizeof(*ovinfo));
-	return -EINVAL;
-}
-
-/**
- * of_build_overlay_info() - Build an overlay info array
- * @ov		Overlay to build
- * @tree:	Device node containing all the overlays
- *
- * Helper function that given a tree containing overlay information,
- * allocates and builds an overlay info array containing it, ready
- * for use using of_overlay_apply.
- *
- * Returns 0 on success with the @cntp @ovinfop pointers valid,
- * while on error a negative error value is returned.
- */
-static int of_build_overlay_info(struct of_overlay *ov,
+static int init_overlay_changeset(struct overlay_changeset *ovcs,
 		struct device_node *tree)
 {
-	struct device_node *node;
-	struct of_overlay_info *ovinfo;
-	int cnt, err;
+	struct device_node *node, *overlay_node;
+	struct fragment *fragment;
+	struct fragment *fragments;
+	int cnt, ret;
 
-	/* worst case; every child is a node */
-	cnt = 0;
-	for_each_child_of_node(tree, node)
-		cnt++;
+	/*
+	 * Warn for some issues.  Can not return -EINVAL for these until
+	 * of_unittest_apply_overlay() is fixed to pass these checks.
+	 */
+	if (!of_node_check_flag(tree, OF_DYNAMIC))
+		pr_debug("%s() tree is not dynamic\n", __func__);
 
-	if (of_get_child_by_name(tree, "__symbols__"))
-		cnt++;
+	if (!of_node_check_flag(tree, OF_DETACHED))
+		pr_debug("%s() tree is not detached\n", __func__);
 
-	ovinfo = kcalloc(cnt, sizeof(*ovinfo), GFP_KERNEL);
-	if (ovinfo == NULL)
-		return -ENOMEM;
+	if (!of_node_is_root(tree))
+		pr_debug("%s() tree is not root\n", __func__);
+
+	ovcs->overlay_tree = tree;
+
+	INIT_LIST_HEAD(&ovcs->ovcs_list);
+
+	of_changeset_init(&ovcs->cset);
+
+	ovcs->id = idr_alloc(&ovcs_idr, ovcs, 1, 0, GFP_KERNEL);
+	if (ovcs->id <= 0)
+		return ovcs->id;
 
 	cnt = 0;
+
+	/* fragment nodes */
 	for_each_child_of_node(tree, node) {
-		err = of_fill_overlay_info(ov, node, &ovinfo[cnt]);
-		if (err == 0)
+		overlay_node = of_get_child_by_name(node, "__overlay__");
+		if (overlay_node) {
 			cnt++;
+			of_node_put(overlay_node);
+		}
 	}
 
 	node = of_get_child_by_name(tree, "__symbols__");
 	if (node) {
-		ovinfo[cnt].overlay = node;
-		ovinfo[cnt].target = of_find_node_by_path("/__symbols__");
-		ovinfo[cnt].is_symbols_node = 1;
+		cnt++;
+		of_node_put(node);
+	}
 
-		if (!ovinfo[cnt].target) {
-			pr_err("no symbols in root of device tree.\n");
-			return -EINVAL;
+	fragments = kcalloc(cnt, sizeof(*fragments), GFP_KERNEL);
+	if (!fragments) {
+		ret = -ENOMEM;
+		goto err_free_idr;
+	}
+
+	cnt = 0;
+	for_each_child_of_node(tree, node) {
+		fragment = &fragments[cnt];
+		fragment->overlay = of_get_child_by_name(node, "__overlay__");
+		if (fragment->overlay) {
+			fragment->target = find_target_node(node);
+			if (!fragment->target) {
+				of_node_put(fragment->overlay);
+				ret = -EINVAL;
+				goto err_free_fragments;
+			} else {
+				cnt++;
+			}
+		}
+	}
+
+	/*
+	 * if there is a symbols fragment in ovcs->fragments[i] it is
+	 * the final element in the array
+	 */
+	node = of_get_child_by_name(tree, "__symbols__");
+	if (node) {
+		ovcs->symbols_fragment = 1;
+		fragment = &fragments[cnt];
+		fragment->overlay = node;
+		fragment->target = of_find_node_by_path("/__symbols__");
+
+		if (!fragment->target) {
+			pr_err("symbols in overlay, but not in live tree\n");
+			ret = -EINVAL;
+			goto err_free_fragments;
 		}
 
 		cnt++;
 	}
 
-	/* if nothing filled, return error */
-	if (cnt == 0) {
-		kfree(ovinfo);
-		return -ENODEV;
+	if (!cnt) {
+		ret = -EINVAL;
+		goto err_free_fragments;
 	}
 
-	ov->count = cnt;
-	ov->ovinfo_tab = ovinfo;
+	ovcs->count = cnt;
+	ovcs->fragments = fragments;
 
 	return 0;
+
+err_free_fragments:
+	kfree(fragments);
+err_free_idr:
+	idr_remove(&ovcs_idr, ovcs->id);
+
+	pr_err("%s() failed, ret = %d\n", __func__, ret);
+
+	return ret;
 }
 
-/**
- * of_free_overlay_info() - Free an overlay info array
- * @ov		Overlay to free the overlay info from
- * @ovinfo_tab:	Array of overlay_info's to free
- *
- * Releases the memory of a previously allocated ovinfo array
- * by of_build_overlay_info.
- * Returns 0, or an error if the arguments are bogus.
- */
-static int of_free_overlay_info(struct of_overlay *ov)
+static void free_overlay_changeset(struct overlay_changeset *ovcs)
 {
-	struct of_overlay_info *ovinfo;
 	int i;
 
-	/* do it in reverse */
-	for (i = ov->count - 1; i >= 0; i--) {
-		ovinfo = &ov->ovinfo_tab[i];
+	if (!ovcs->cset.entries.next)
+		return;
+	of_changeset_destroy(&ovcs->cset);
 
-		of_node_put(ovinfo->target);
-		of_node_put(ovinfo->overlay);
+	if (ovcs->id)
+		idr_remove(&ovcs_idr, ovcs->id);
+
+	for (i = 0; i < ovcs->count; i++) {
+		of_node_put(ovcs->fragments[i].target);
+		of_node_put(ovcs->fragments[i].overlay);
 	}
-	kfree(ov->ovinfo_tab);
+	kfree(ovcs->fragments);
 
-	return 0;
+	kfree(ovcs);
 }
 
-static LIST_HEAD(ov_list);
-static DEFINE_IDR(ov_idr);
-
 /**
- * of_overlay_create() - Create and apply an overlay
- * @tree:	Device node containing all the overlays
+ * of_overlay_apply() - Create and apply an overlay changeset
+ * @tree:	Expanded overlay device tree
+ * @ovcs_id:	Pointer to overlay changeset id
  *
- * Creates and applies an overlay while also keeping track
- * of the overlay in a list. This list can be used to prevent
- * illegal overlay removals.
+ * Creates and applies an overlay changeset.
  *
- * Returns the id of the created overlay, or a negative error number
+ * If an error occurs in a pre-apply notifier, then no changes are made
+ * to the device tree.
+ *
+
+ * A non-zero return value will not have created the changeset if error is from:
+ *   - parameter checks
+ *   - building the changeset
+ *   - overlay changset pre-apply notifier
+ *
+ * If an error is returned by an overlay changeset pre-apply notifier
+ * then no further overlay changeset pre-apply notifier will be called.
+ *
+ * A non-zero return value will have created the changeset if error is from:
+ *   - overlay changeset entry notifier
+ *   - overlay changset post-apply notifier
+ *
+ * If an error is returned by an overlay changeset post-apply notifier
+ * then no further overlay changeset post-apply notifier will be called.
+ *
+ * If more than one notifier returns an error, then the last notifier
+ * error to occur is returned.
+ *
+ * If an error occurred while applying the overlay changeset, then an
+ * attempt is made to revert any changes that were made to the
+ * device tree.  If there were any errors during the revert attempt
+ * then the state of the device tree can not be determined, and any
+ * following attempt to apply or remove an overlay changeset will be
+ * refused.
+ *
+ * Returns 0 on success, or a negative error number.  Overlay changeset
+ * id is returned to *ovcs_id.
  */
-int of_overlay_create(struct device_node *tree)
+
+int of_overlay_apply(struct device_node *tree, int *ovcs_id)
 {
-	struct of_overlay *ov;
-	int err, id;
+	struct overlay_changeset *ovcs;
+	int ret = 0, ret_revert, ret_tmp;
 
-	/* allocate the overlay structure */
-	ov = kzalloc(sizeof(*ov), GFP_KERNEL);
-	if (ov == NULL)
-		return -ENOMEM;
-	ov->id = -1;
+	*ovcs_id = 0;
 
-	INIT_LIST_HEAD(&ov->node);
+	if (devicetree_corrupt()) {
+		pr_err("devicetree state suspect, refuse to apply overlay\n");
+		ret = -EBUSY;
+		goto out;
+	}
 
-	of_changeset_init(&ov->cset);
+	ovcs = kzalloc(sizeof(*ovcs), GFP_KERNEL);
+	if (!ovcs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	of_overlay_mutex_lock();
+
+	ret = of_resolve_phandles(tree);
+	if (ret)
+		goto err_overlay_unlock;
 
 	mutex_lock(&of_mutex);
 
-	id = idr_alloc(&ov_idr, ov, 0, 0, GFP_KERNEL);
-	if (id < 0) {
-		err = id;
-		goto err_destroy_trans;
-	}
-	ov->id = id;
+	ret = init_overlay_changeset(ovcs, tree);
+	if (ret)
+		goto err_free_overlay_changeset;
 
-	/* build the overlay info structures */
-	err = of_build_overlay_info(ov, tree);
-	if (err) {
-		pr_err("of_build_overlay_info() failed for tree@%pOF\n",
-		       tree);
-		goto err_free_idr;
+	ret = overlay_notify(ovcs, OF_OVERLAY_PRE_APPLY);
+	if (ret) {
+		pr_err("overlay changeset pre-apply notify error %d\n", ret);
+		goto err_free_overlay_changeset;
 	}
 
-	err = of_overlay_notify(ov, OF_OVERLAY_PRE_APPLY);
-	if (err < 0) {
-		pr_err("%s: Pre-apply notifier failed (err=%d)\n",
-		       __func__, err);
-		goto err_free_idr;
+	ret = build_changeset(ovcs);
+	if (ret)
+		goto err_free_overlay_changeset;
+
+	ret_revert = 0;
+	ret = __of_changeset_apply_entries(&ovcs->cset, &ret_revert);
+	if (ret) {
+		if (ret_revert) {
+			pr_debug("overlay changeset revert error %d\n",
+				 ret_revert);
+			devicetree_state_flags |= DTSF_APPLY_FAIL;
+		}
+		goto err_free_overlay_changeset;
+	} else {
+		ret = __of_changeset_apply_notify(&ovcs->cset);
+		if (ret)
+			pr_err("overlay changeset entry notify error %d\n",
+			       ret);
+		/* fall through */
 	}
 
-	/* apply the overlay */
-	err = of_overlay_apply(ov);
-	if (err)
-		goto err_abort_trans;
+	list_add_tail(&ovcs->ovcs_list, &ovcs_list);
+	*ovcs_id = ovcs->id;
 
-	/* apply the changeset */
-	err = __of_changeset_apply(&ov->cset);
-	if (err)
-		goto err_revert_overlay;
+	ret_tmp = overlay_notify(ovcs, OF_OVERLAY_POST_APPLY);
+	if (ret_tmp) {
+		pr_err("overlay changeset post-apply notify error %d\n",
+		       ret_tmp);
+		if (!ret)
+			ret = ret_tmp;
+	}
 
+	mutex_unlock(&of_mutex);
+	of_overlay_mutex_unlock();
 
-	/* add to the tail of the overlay list */
-	list_add_tail(&ov->node, &ov_list);
+	goto out;
 
-	of_overlay_notify(ov, OF_OVERLAY_POST_APPLY);
+err_overlay_unlock:
+	of_overlay_mutex_unlock();
+
+err_free_overlay_changeset:
+	free_overlay_changeset(ovcs);
 
 	mutex_unlock(&of_mutex);
 
-	return id;
+out:
+	pr_debug("%s() err=%d\n", __func__, ret);
 
-err_revert_overlay:
-err_abort_trans:
-	of_free_overlay_info(ov);
-err_free_idr:
-	idr_remove(&ov_idr, ov->id);
-err_destroy_trans:
-	of_changeset_destroy(&ov->cset);
-	kfree(ov);
-	mutex_unlock(&of_mutex);
-
-	return err;
+	return ret;
 }
-EXPORT_SYMBOL_GPL(of_overlay_create);
+EXPORT_SYMBOL_GPL(of_overlay_apply);
 
-/* check whether the given node, lies under the given tree */
-static int overlay_subtree_check(struct device_node *tree,
-		struct device_node *dn)
+/*
+ * Find @np in @tree.
+ *
+ * Returns 1 if @np is @tree or is contained in @tree, else 0
+ */
+static int find_node(struct device_node *tree, struct device_node *np)
 {
 	struct device_node *child;
 
-	/* match? */
-	if (tree == dn)
+	if (tree == np)
 		return 1;
 
 	for_each_child_of_node(tree, child) {
-		if (overlay_subtree_check(child, dn)) {
+		if (find_node(child, np)) {
 			of_node_put(child);
 			return 1;
 		}
@@ -567,29 +797,39 @@ static int overlay_subtree_check(struct device_node *tree,
 	return 0;
 }
 
-/* check whether this overlay is the topmost */
-static int overlay_is_topmost(struct of_overlay *ov, struct device_node *dn)
+/*
+ * Is @remove_ce_node a child of, a parent of, or the same as any
+ * node in an overlay changeset more topmost than @remove_ovcs?
+ *
+ * Returns 1 if found, else 0
+ */
+static int node_overlaps_later_cs(struct overlay_changeset *remove_ovcs,
+		struct device_node *remove_ce_node)
 {
-	struct of_overlay *ovt;
+	struct overlay_changeset *ovcs;
 	struct of_changeset_entry *ce;
 
-	list_for_each_entry_reverse(ovt, &ov_list, node) {
-		/* if we hit ourselves, we're done */
-		if (ovt == ov)
+	list_for_each_entry_reverse(ovcs, &ovcs_list, ovcs_list) {
+		if (ovcs == remove_ovcs)
 			break;
 
-		/* check against each subtree affected by this overlay */
-		list_for_each_entry(ce, &ovt->cset.entries, node) {
-			if (overlay_subtree_check(ce->np, dn)) {
-				pr_err("%s: #%d clashes #%d @%pOF\n",
-					__func__, ov->id, ovt->id, dn);
-				return 0;
+		list_for_each_entry(ce, &ovcs->cset.entries, node) {
+			if (find_node(ce->np, remove_ce_node)) {
+				pr_err("%s: #%d overlaps with #%d @%pOF\n",
+					__func__, remove_ovcs->id, ovcs->id,
+					remove_ce_node);
+				return 1;
+			}
+			if (find_node(remove_ce_node, ce->np)) {
+				pr_err("%s: #%d overlaps with #%d @%pOF\n",
+					__func__, remove_ovcs->id, ovcs->id,
+					remove_ce_node);
+				return 1;
 			}
 		}
 	}
 
-	/* overlay is topmost */
-	return 1;
+	return 0;
 }
 
 /*
@@ -602,13 +842,13 @@ static int overlay_is_topmost(struct of_overlay *ov, struct device_node *dn)
  * the one closest to the tail. If another overlay has affected this
  * device node and is closest to the tail, then removal is not permited.
  */
-static int overlay_removal_is_ok(struct of_overlay *ov)
+static int overlay_removal_is_ok(struct overlay_changeset *remove_ovcs)
 {
-	struct of_changeset_entry *ce;
+	struct of_changeset_entry *remove_ce;
 
-	list_for_each_entry(ce, &ov->cset.entries, node) {
-		if (!overlay_is_topmost(ov, ce->np)) {
-			pr_err("overlay #%d is not topmost\n", ov->id);
+	list_for_each_entry(remove_ce, &remove_ovcs->cset.entries, node) {
+		if (node_overlaps_later_cs(remove_ovcs, remove_ce->np)) {
+			pr_err("overlay #%d is not topmost\n", remove_ovcs->id);
 			return 0;
 		}
 	}
@@ -617,75 +857,130 @@ static int overlay_removal_is_ok(struct of_overlay *ov)
 }
 
 /**
- * of_overlay_destroy() - Removes an overlay
- * @id:	Overlay id number returned by a previous call to of_overlay_create
+ * of_overlay_remove() - Revert and free an overlay changeset
+ * @ovcs_id:	Pointer to overlay changeset id
  *
- * Removes an overlay if it is permissible.
+ * Removes an overlay if it is permissible.  @ovcs_id was previously returned
+ * by of_overlay_apply().
  *
- * Returns 0 on success, or a negative error number
+ * If an error occurred while attempting to revert the overlay changeset,
+ * then an attempt is made to re-apply any changeset entry that was
+ * reverted.  If an error occurs on re-apply then the state of the device
+ * tree can not be determined, and any following attempt to apply or remove
+ * an overlay changeset will be refused.
+ *
+ * A non-zero return value will not revert the changeset if error is from:
+ *   - parameter checks
+ *   - overlay changset pre-remove notifier
+ *   - overlay changeset entry revert
+ *
+ * If an error is returned by an overlay changeset pre-remove notifier
+ * then no further overlay changeset pre-remove notifier will be called.
+ *
+ * If more than one notifier returns an error, then the last notifier
+ * error to occur is returned.
+ *
+ * A non-zero return value will revert the changeset if error is from:
+ *   - overlay changeset entry notifier
+ *   - overlay changset post-remove notifier
+ *
+ * If an error is returned by an overlay changeset post-remove notifier
+ * then no further overlay changeset post-remove notifier will be called.
+ *
+ * Returns 0 on success, or a negative error number.  *ovcs_id is set to
+ * zero after reverting the changeset, even if a subsequent error occurs.
  */
-int of_overlay_destroy(int id)
+int of_overlay_remove(int *ovcs_id)
 {
-	struct of_overlay *ov;
-	int err;
+	struct overlay_changeset *ovcs;
+	int ret, ret_apply, ret_tmp;
+
+	ret = 0;
+
+	if (devicetree_corrupt()) {
+		pr_err("suspect devicetree state, refuse to remove overlay\n");
+		ret = -EBUSY;
+		goto out;
+	}
 
 	mutex_lock(&of_mutex);
 
-	ov = idr_find(&ov_idr, id);
-	if (ov == NULL) {
-		err = -ENODEV;
-		pr_err("destroy: Could not find overlay #%d\n", id);
-		goto out;
+	ovcs = idr_find(&ovcs_idr, *ovcs_id);
+	if (!ovcs) {
+		ret = -ENODEV;
+		pr_err("remove: Could not find overlay #%d\n", *ovcs_id);
+		goto out_unlock;
 	}
 
-	/* check whether the overlay is safe to remove */
-	if (!overlay_removal_is_ok(ov)) {
-		err = -EBUSY;
-		goto out;
+	if (!overlay_removal_is_ok(ovcs)) {
+		ret = -EBUSY;
+		goto out_unlock;
 	}
 
-	of_overlay_notify(ov, OF_OVERLAY_PRE_REMOVE);
-	list_del(&ov->node);
-	__of_changeset_revert(&ov->cset);
-	of_overlay_notify(ov, OF_OVERLAY_POST_REMOVE);
-	of_free_overlay_info(ov);
-	idr_remove(&ov_idr, id);
-	of_changeset_destroy(&ov->cset);
-	kfree(ov);
+	ret = overlay_notify(ovcs, OF_OVERLAY_PRE_REMOVE);
+	if (ret) {
+		pr_err("overlay changeset pre-remove notify error %d\n", ret);
+		goto out_unlock;
+	}
 
-	err = 0;
+	list_del(&ovcs->ovcs_list);
 
-out:
+	ret_apply = 0;
+	ret = __of_changeset_revert_entries(&ovcs->cset, &ret_apply);
+	if (ret) {
+		if (ret_apply)
+			devicetree_state_flags |= DTSF_REVERT_FAIL;
+		goto out_unlock;
+	} else {
+		ret = __of_changeset_revert_notify(&ovcs->cset);
+		if (ret) {
+			pr_err("overlay changeset entry notify error %d\n",
+			       ret);
+			/* fall through - changeset was reverted */
+		}
+	}
+
+	*ovcs_id = 0;
+
+	ret_tmp = overlay_notify(ovcs, OF_OVERLAY_POST_REMOVE);
+	if (ret_tmp) {
+		pr_err("overlay changeset post-remove notify error %d\n",
+		       ret_tmp);
+		if (!ret)
+			ret = ret_tmp;
+	}
+
+	free_overlay_changeset(ovcs);
+
+out_unlock:
 	mutex_unlock(&of_mutex);
 
-	return err;
+out:
+	pr_debug("%s() err=%d\n", __func__, ret);
+
+	return ret;
 }
-EXPORT_SYMBOL_GPL(of_overlay_destroy);
+EXPORT_SYMBOL_GPL(of_overlay_remove);
 
 /**
- * of_overlay_destroy_all() - Removes all overlays from the system
+ * of_overlay_remove_all() - Reverts and frees all overlay changesets
  *
  * Removes all overlays from the system in the correct order.
  *
  * Returns 0 on success, or a negative error number
  */
-int of_overlay_destroy_all(void)
+int of_overlay_remove_all(void)
 {
-	struct of_overlay *ov, *ovn;
-
-	mutex_lock(&of_mutex);
+	struct overlay_changeset *ovcs, *ovcs_n;
+	int ret;
 
 	/* the tail of list is guaranteed to be safe to remove */
-	list_for_each_entry_safe_reverse(ov, ovn, &ov_list, node) {
-		list_del(&ov->node);
-		__of_changeset_revert(&ov->cset);
-		of_free_overlay_info(ov);
-		idr_remove(&ov_idr, ov->id);
-		kfree(ov);
+	list_for_each_entry_safe_reverse(ovcs, ovcs_n, &ovcs_list, ovcs_list) {
+		ret = of_overlay_remove(&ovcs->id);
+		if (ret)
+			return ret;
 	}
 
-	mutex_unlock(&of_mutex);
-
 	return 0;
 }
-EXPORT_SYMBOL_GPL(of_overlay_destroy_all);
+EXPORT_SYMBOL_GPL(of_overlay_remove_all);
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index 99309cb7d372..cfaeef5f6cb1 100644
--- a/drivers/of/resolver.c
+++ b/drivers/of/resolver.c
@@ -84,10 +84,9 @@ static int update_usages_of_a_phandle_reference(struct device_node *overlay,
 	int offset, len;
 	int err = 0;
 
-	value = kmalloc(prop_fixup->length, GFP_KERNEL);
+	value = kmemdup(prop_fixup->value, prop_fixup->length, GFP_KERNEL);
 	if (!value)
 		return -ENOMEM;
-	memcpy(value, prop_fixup->value, prop_fixup->length);
 
 	/* prop_fixup contains a list of tuples of path:property_name:offset */
 	end = value + prop_fixup->length;
@@ -165,7 +164,6 @@ static int adjust_local_phandle_references(struct device_node *local_fixups,
 	struct property *prop_fix, *prop;
 	int err, i, count;
 	unsigned int off;
-	phandle phandle;
 
 	if (!local_fixups)
 		return 0;
@@ -195,9 +193,7 @@ static int adjust_local_phandle_references(struct device_node *local_fixups,
 			if ((off + 4) > prop->length)
 				return -EINVAL;
 
-			phandle = be32_to_cpu(*(__be32 *)(prop->value + off));
-			phandle += phandle_delta;
-			*(__be32 *)(prop->value + off) = cpu_to_be32(phandle);
+			be32_add_cpu(prop->value + off, phandle_delta);
 		}
 	}
 
@@ -275,11 +271,18 @@ int of_resolve_phandles(struct device_node *overlay)
 		err = -EINVAL;
 		goto out;
 	}
+
+#if 0
+	Temporarily disable check so that old style overlay unittests
+	do not fail when of_resolve_phandles() is moved into
+	of_overlay_apply().
+
 	if (!of_node_check_flag(overlay, OF_DETACHED)) {
 		pr_err("overlay not detached\n");
 		err = -EINVAL;
 		goto out;
 	}
+#endif
 
 	phandle_delta = live_tree_max_phandle() + 1;
 	adjust_overlay_phandles(overlay, phandle_delta);
diff --git a/drivers/of/unittest-data/.gitignore b/drivers/of/unittest-data/.gitignore
deleted file mode 100644
index 4b3cf8b16de2..000000000000
--- a/drivers/of/unittest-data/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-testcases.dtb
-testcases.dtb.S
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 168ef0bbabde..e568b1e82501 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -994,10 +994,17 @@ static int __init unittest_data_add(void)
 		pr_warn("%s: No tree to attach; not running tests\n", __func__);
 		return -ENODATA;
 	}
-	of_node_set_flag(unittest_data_node, OF_DETACHED);
+
+	/*
+	 * This lock normally encloses of_overlay_apply() as well as
+	 * of_resolve_phandles().
+	 */
+	of_overlay_mutex_lock();
+
 	rc = of_resolve_phandles(unittest_data_node);
 	if (rc) {
 		pr_err("%s: Failed to resolve phandles (rc=%i)\n", __func__, rc);
+		of_overlay_mutex_unlock();
 		return -EINVAL;
 	}
 
@@ -1007,6 +1014,7 @@ static int __init unittest_data_add(void)
 			__of_attach_node_sysfs(np);
 		of_aliases = of_find_node_by_path("/aliases");
 		of_chosen = of_find_node_by_path("/chosen");
+		of_overlay_mutex_unlock();
 		return 0;
 	}
 
@@ -1019,6 +1027,9 @@ static int __init unittest_data_add(void)
 		attach_node_and_children(np);
 		np = next;
 	}
+
+	of_overlay_mutex_unlock();
+
 	return 0;
 }
 
@@ -1219,7 +1230,7 @@ static void of_unittest_untrack_overlay(int id)
 
 static void of_unittest_destroy_tracked_overlays(void)
 {
-	int id, ret, defers;
+	int id, ret, defers, ovcs_id;
 
 	if (overlay_first_id < 0)
 		return;
@@ -1232,7 +1243,8 @@ static void of_unittest_destroy_tracked_overlays(void)
 			if (!(overlay_id_bits[BIT_WORD(id)] & BIT_MASK(id)))
 				continue;
 
-			ret = of_overlay_destroy(id + overlay_first_id);
+			ovcs_id = id + overlay_first_id;
+			ret = of_overlay_remove(&ovcs_id);
 			if (ret == -ENODEV) {
 				pr_warn("%s: no overlay to destroy for #%d\n",
 					__func__, id + overlay_first_id);
@@ -1254,7 +1266,7 @@ static int of_unittest_apply_overlay(int overlay_nr, int unittest_nr,
 		int *overlay_id)
 {
 	struct device_node *np = NULL;
-	int ret, id = -1;
+	int ret;
 
 	np = of_find_node_by_path(overlay_path(overlay_nr));
 	if (np == NULL) {
@@ -1264,23 +1276,20 @@ static int of_unittest_apply_overlay(int overlay_nr, int unittest_nr,
 		goto out;
 	}
 
-	ret = of_overlay_create(np);
+	*overlay_id = 0;
+	ret = of_overlay_apply(np, overlay_id);
 	if (ret < 0) {
 		unittest(0, "could not create overlay from \"%s\"\n",
 				overlay_path(overlay_nr));
 		goto out;
 	}
-	id = ret;
-	of_unittest_track_overlay(id);
+	of_unittest_track_overlay(*overlay_id);
 
 	ret = 0;
 
 out:
 	of_node_put(np);
 
-	if (overlay_id)
-		*overlay_id = id;
-
 	return ret;
 }
 
@@ -1288,7 +1297,7 @@ out:
 static int of_unittest_apply_overlay_check(int overlay_nr, int unittest_nr,
 		int before, int after, enum overlay_type ovtype)
 {
-	int ret;
+	int ret, ovcs_id;
 
 	/* unittest device must not be in before state */
 	if (of_unittest_device_exists(unittest_nr, ovtype) != before) {
@@ -1299,7 +1308,8 @@ static int of_unittest_apply_overlay_check(int overlay_nr, int unittest_nr,
 		return -EINVAL;
 	}
 
-	ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, NULL);
+	ovcs_id = 0;
+	ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, &ovcs_id);
 	if (ret != 0) {
 		/* of_unittest_apply_overlay already called unittest() */
 		return ret;
@@ -1322,7 +1332,7 @@ static int of_unittest_apply_revert_overlay_check(int overlay_nr,
 		int unittest_nr, int before, int after,
 		enum overlay_type ovtype)
 {
-	int ret, ov_id;
+	int ret, ovcs_id;
 
 	/* unittest device must be in before state */
 	if (of_unittest_device_exists(unittest_nr, ovtype) != before) {
@@ -1334,7 +1344,8 @@ static int of_unittest_apply_revert_overlay_check(int overlay_nr,
 	}
 
 	/* apply the overlay */
-	ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, &ov_id);
+	ovcs_id = 0;
+	ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, &ovcs_id);
 	if (ret != 0) {
 		/* of_unittest_apply_overlay already called unittest() */
 		return ret;
@@ -1349,7 +1360,7 @@ static int of_unittest_apply_revert_overlay_check(int overlay_nr,
 		return -EINVAL;
 	}
 
-	ret = of_overlay_destroy(ov_id);
+	ret = of_overlay_remove(&ovcs_id);
 	if (ret != 0) {
 		unittest(0, "overlay @\"%s\" failed to be destroyed @\"%s\"\n",
 				overlay_path(overlay_nr),
@@ -1451,7 +1462,7 @@ static void of_unittest_overlay_5(void)
 static void of_unittest_overlay_6(void)
 {
 	struct device_node *np;
-	int ret, i, ov_id[2];
+	int ret, i, ov_id[2], ovcs_id;
 	int overlay_nr = 6, unittest_nr = 6;
 	int before = 0, after = 1;
 
@@ -1478,13 +1489,14 @@ static void of_unittest_overlay_6(void)
 			return;
 		}
 
-		ret = of_overlay_create(np);
+		ovcs_id = 0;
+		ret = of_overlay_apply(np, &ovcs_id);
 		if (ret < 0)  {
 			unittest(0, "could not create overlay from \"%s\"\n",
 					overlay_path(overlay_nr + i));
 			return;
 		}
-		ov_id[i] = ret;
+		ov_id[i] = ovcs_id;
 		of_unittest_track_overlay(ov_id[i]);
 	}
 
@@ -1502,7 +1514,8 @@ static void of_unittest_overlay_6(void)
 	}
 
 	for (i = 1; i >= 0; i--) {
-		ret = of_overlay_destroy(ov_id[i]);
+		ovcs_id = ov_id[i];
+		ret = of_overlay_remove(&ovcs_id);
 		if (ret != 0) {
 			unittest(0, "overlay @\"%s\" failed destroy @\"%s\"\n",
 					overlay_path(overlay_nr + i),
@@ -1533,7 +1546,7 @@ static void of_unittest_overlay_6(void)
 static void of_unittest_overlay_8(void)
 {
 	struct device_node *np;
-	int ret, i, ov_id[2];
+	int ret, i, ov_id[2], ovcs_id;
 	int overlay_nr = 8, unittest_nr = 8;
 
 	/* we don't care about device state in this test */
@@ -1548,18 +1561,20 @@ static void of_unittest_overlay_8(void)
 			return;
 		}
 
-		ret = of_overlay_create(np);
+		ovcs_id = 0;
+		ret = of_overlay_apply(np, &ovcs_id);
 		if (ret < 0)  {
 			unittest(0, "could not create overlay from \"%s\"\n",
 					overlay_path(overlay_nr + i));
 			return;
 		}
-		ov_id[i] = ret;
+		ov_id[i] = ovcs_id;
 		of_unittest_track_overlay(ov_id[i]);
 	}
 
 	/* now try to remove first overlay (it should fail) */
-	ret = of_overlay_destroy(ov_id[0]);
+	ovcs_id = ov_id[0];
+	ret = of_overlay_remove(&ovcs_id);
 	if (ret == 0) {
 		unittest(0, "overlay @\"%s\" was destroyed @\"%s\"\n",
 				overlay_path(overlay_nr + 0),
@@ -1570,7 +1585,8 @@ static void of_unittest_overlay_8(void)
 
 	/* removing them in order should work */
 	for (i = 1; i >= 0; i--) {
-		ret = of_overlay_destroy(ov_id[i]);
+		ovcs_id = ov_id[i];
+		ret = of_overlay_remove(&ovcs_id);
 		if (ret != 0) {
 			unittest(0, "overlay @\"%s\" not destroyed @\"%s\"\n",
 					overlay_path(overlay_nr + i),
@@ -2144,21 +2160,13 @@ static int __init overlay_data_add(int onum)
 		ret = 0;
 		goto out_free_data;
 	}
-	of_node_set_flag(info->np_overlay, OF_DETACHED);
 
-	ret = of_resolve_phandles(info->np_overlay);
-	if (ret) {
-		pr_err("resolve ot phandles (ret=%d), %d\n", ret, onum);
-		goto out_free_np_overlay;
-	}
-
-	ret = of_overlay_create(info->np_overlay);
+	info->overlay_id = 0;
+	ret = of_overlay_apply(info->np_overlay, &info->overlay_id);
 	if (ret < 0) {
-		pr_err("of_overlay_create() (ret=%d), %d\n", ret, onum);
+		pr_err("of_overlay_apply() (ret=%d), %d\n", ret, onum);
+		of_overlay_mutex_unlock();
 		goto out_free_np_overlay;
-	} else {
-		info->overlay_id = ret;
-		ret = 0;
 	}
 
 	pr_debug("__dtb_overlay_begin applied, overlay id %d\n", ret);
@@ -2207,7 +2215,10 @@ static __init void of_unittest_overlay_high_level(void)
 	 * Could not fixup phandles in unittest_unflatten_overlay_base()
 	 * because kmalloc() was not yet available.
 	 */
+	of_overlay_mutex_lock();
 	of_resolve_phandles(overlay_base_root);
+	of_overlay_mutex_unlock();
+
 
 	/*
 	 * do not allow overlay_base to duplicate any node already in
diff --git a/include/linux/of.h b/include/linux/of.h
index b240ed69dc96..43b5034c6a1e 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -37,9 +37,15 @@ struct property {
 	int	length;
 	void	*value;
 	struct property *next;
+#if defined(CONFIG_OF_DYNAMIC) || defined(CONFIG_SPARC)
 	unsigned long _flags;
+#endif
+#if defined(CONFIG_OF_PROMTREE)
 	unsigned int unique_id;
+#endif
+#if defined(CONFIG_OF_KOBJ)
 	struct bin_attribute attr;
+#endif
 };
 
 #if defined(CONFIG_SPARC)
@@ -58,7 +64,9 @@ struct device_node {
 	struct	device_node *parent;
 	struct	device_node *child;
 	struct	device_node *sibling;
+#if defined(CONFIG_OF_KOBJ)
 	struct	kobject kobj;
+#endif
 	unsigned long _flags;
 	void	*data;
 #if defined(CONFIG_SPARC)
@@ -103,21 +111,17 @@ extern struct kobj_type of_node_ktype;
 extern const struct fwnode_operations of_fwnode_ops;
 static inline void of_node_init(struct device_node *node)
 {
+#if defined(CONFIG_OF_KOBJ)
 	kobject_init(&node->kobj, &of_node_ktype);
+#endif
 	node->fwnode.ops = &of_fwnode_ops;
 }
 
-/* true when node is initialized */
-static inline int of_node_is_initialized(struct device_node *node)
-{
-	return node && node->kobj.state_initialized;
-}
-
-/* true when node is attached (i.e. present on sysfs) */
-static inline int of_node_is_attached(struct device_node *node)
-{
-	return node && node->kobj.state_in_sysfs;
-}
+#if defined(CONFIG_OF_KOBJ)
+#define of_node_kobj(n) (&(n)->kobj)
+#else
+#define of_node_kobj(n) NULL
+#endif
 
 #ifdef CONFIG_OF_DYNAMIC
 extern struct device_node *of_node_get(struct device_node *node);
@@ -203,6 +207,7 @@ static inline void of_node_clear_flag(struct device_node *n, unsigned long flag)
 	clear_bit(flag, &n->_flags);
 }
 
+#if defined(CONFIG_OF_DYNAMIC) || defined(CONFIG_SPARC)
 static inline int of_property_check_flag(struct property *p, unsigned long flag)
 {
 	return test_bit(flag, &p->_flags);
@@ -217,6 +222,7 @@ static inline void of_property_clear_flag(struct property *p, unsigned long flag
 {
 	clear_bit(flag, &p->_flags);
 }
+#endif
 
 extern struct device_node *__of_find_all_nodes(struct device_node *prev);
 extern struct device_node *of_find_all_nodes(struct device_node *prev);
@@ -1283,9 +1289,6 @@ static inline int of_reconfig_get_state_change(unsigned long action,
 }
 #endif /* CONFIG_OF_DYNAMIC */
 
-/* CONFIG_OF_RESOLVE api */
-extern int of_resolve_phandles(struct device_node *tree);
-
 /**
  * of_device_is_system_power_controller - Tells if system-power-controller is found for device_node
  * @np: Pointer to the given device_node
@@ -1302,7 +1305,7 @@ static inline bool of_device_is_system_power_controller(const struct device_node
  */
 
 enum of_overlay_notify_action {
-	OF_OVERLAY_PRE_APPLY,
+	OF_OVERLAY_PRE_APPLY = 0,
 	OF_OVERLAY_POST_APPLY,
 	OF_OVERLAY_PRE_REMOVE,
 	OF_OVERLAY_POST_REMOVE,
@@ -1316,26 +1319,26 @@ struct of_overlay_notify_data {
 #ifdef CONFIG_OF_OVERLAY
 
 /* ID based overlays; the API for external users */
-int of_overlay_create(struct device_node *tree);
-int of_overlay_destroy(int id);
-int of_overlay_destroy_all(void);
+int of_overlay_apply(struct device_node *tree, int *ovcs_id);
+int of_overlay_remove(int *ovcs_id);
+int of_overlay_remove_all(void);
 
 int of_overlay_notifier_register(struct notifier_block *nb);
 int of_overlay_notifier_unregister(struct notifier_block *nb);
 
 #else
 
-static inline int of_overlay_create(struct device_node *tree)
+static inline int of_overlay_apply(struct device_node *tree, int *ovcs_id)
 {
 	return -ENOTSUPP;
 }
 
-static inline int of_overlay_destroy(int id)
+static inline int of_overlay_remove(int *ovcs_id)
 {
 	return -ENOTSUPP;
 }
 
-static inline int of_overlay_destroy_all(void)
+static inline int of_overlay_remove_all(void)
 {
 	return -ENOTSUPP;
 }
diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst
index c8ba6e7f9868..7301ab5e2e06 100644
--- a/scripts/Makefile.dtbinst
+++ b/scripts/Makefile.dtbinst
@@ -6,8 +6,6 @@
 # INSTALL_DTBS_PATH directory or the default location:
 #
 #   $INSTALL_PATH/dtbs/$KERNELRELEASE
-#
-# Traverse through subdirectories listed in $(dts-dirs).
 # ==========================================================================
 
 src := $(obj)
@@ -21,8 +19,8 @@ include include/config/auto.conf
 include scripts/Kbuild.include
 include $(src)/Makefile
 
-dtbinst-files	:= $(dtb-y)
-dtbinst-dirs	:= $(dts-dirs)
+dtbinst-files	:= $(sort $(dtb-y) $(if $(CONFIG_OF_ALL_DTBS), $(dtb-)))
+dtbinst-dirs	:= $(subdir-y) $(subdir-m)
 
 # Helper targets for Installing DTBs into the boot directory
 quiet_cmd_dtb_install =	INSTALL $<
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 04b5633df1cf..2278405cbc80 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -70,6 +70,11 @@ obj-dirs := $(dir $(multi-objs) $(obj-y))
 real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
 real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
 
+# DTB
+# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
+extra-y				+= $(dtb-y)
+extra-$(CONFIG_OF_ALL_DTBS)	+= $(dtb-)
+
 # Add subdir path
 
 extra-y		:= $(addprefix $(obj)/,$(extra-y))
diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
index 62ea8f83d4a0..e66138449886 100644
--- a/scripts/dtc/checks.c
+++ b/scripts/dtc/checks.c
@@ -873,7 +873,7 @@ static void check_simple_bus_reg(struct check *c, struct dt_info *dti, struct no
 	while (size--)
 		reg = (reg << 32) | fdt32_to_cpu(*(cells++));
 
-	snprintf(unit_addr, sizeof(unit_addr), "%llx", (unsigned long long)reg);
+	snprintf(unit_addr, sizeof(unit_addr), "%"PRIx64, reg);
 	if (!streq(unitname, unit_addr))
 		FAIL(c, dti, "Node %s simple-bus unit address format error, expected \"%s\"",
 		     node->fullpath, unit_addr);
@@ -956,6 +956,274 @@ static void check_obsolete_chosen_interrupt_controller(struct check *c,
 WARNING(obsolete_chosen_interrupt_controller,
 	check_obsolete_chosen_interrupt_controller, NULL);
 
+struct provider {
+	const char *prop_name;
+	const char *cell_name;
+	bool optional;
+};
+
+static void check_property_phandle_args(struct check *c,
+					  struct dt_info *dti,
+				          struct node *node,
+				          struct property *prop,
+				          const struct provider *provider)
+{
+	struct node *root = dti->dt;
+	int cell, cellsize = 0;
+
+	if (prop->val.len % sizeof(cell_t)) {
+		FAIL(c, dti, "property '%s' size (%d) is invalid, expected multiple of %zu in node %s",
+		     prop->name, prop->val.len, sizeof(cell_t), node->fullpath);
+		return;
+	}
+
+	for (cell = 0; cell < prop->val.len / sizeof(cell_t); cell += cellsize + 1) {
+		struct node *provider_node;
+		struct property *cellprop;
+		int phandle;
+
+		phandle = propval_cell_n(prop, cell);
+		/*
+		 * Some bindings use a cell value 0 or -1 to skip over optional
+		 * entries when each index position has a specific definition.
+		 */
+		if (phandle == 0 || phandle == -1) {
+			/* Give up if this is an overlay with external references */
+			if (dti->dtsflags & DTSF_PLUGIN)
+				break;
+
+			cellsize = 0;
+			continue;
+		}
+
+		/* If we have markers, verify the current cell is a phandle */
+		if (prop->val.markers) {
+			struct marker *m = prop->val.markers;
+			for_each_marker_of_type(m, REF_PHANDLE) {
+				if (m->offset == (cell * sizeof(cell_t)))
+					break;
+			}
+			if (!m)
+				FAIL(c, dti, "Property '%s', cell %d is not a phandle reference in %s",
+				     prop->name, cell, node->fullpath);
+		}
+
+		provider_node = get_node_by_phandle(root, phandle);
+		if (!provider_node) {
+			FAIL(c, dti, "Could not get phandle node for %s:%s(cell %d)",
+			     node->fullpath, prop->name, cell);
+			break;
+		}
+
+		cellprop = get_property(provider_node, provider->cell_name);
+		if (cellprop) {
+			cellsize = propval_cell(cellprop);
+		} else if (provider->optional) {
+			cellsize = 0;
+		} else {
+			FAIL(c, dti, "Missing property '%s' in node %s or bad phandle (referred from %s:%s[%d])",
+			     provider->cell_name,
+			     provider_node->fullpath,
+			     node->fullpath, prop->name, cell);
+			break;
+		}
+
+		if (prop->val.len < ((cell + cellsize + 1) * sizeof(cell_t))) {
+			FAIL(c, dti, "%s property size (%d) too small for cell size %d in %s",
+			     prop->name, prop->val.len, cellsize, node->fullpath);
+		}
+	}
+}
+
+static void check_provider_cells_property(struct check *c,
+					  struct dt_info *dti,
+				          struct node *node)
+{
+	struct provider *provider = c->data;
+	struct property *prop;
+
+	prop = get_property(node, provider->prop_name);
+	if (!prop)
+		return;
+
+	check_property_phandle_args(c, dti, node, prop, provider);
+}
+#define WARNING_PROPERTY_PHANDLE_CELLS(nm, propname, cells_name, ...) \
+	static struct provider nm##_provider = { (propname), (cells_name), __VA_ARGS__ }; \
+	WARNING(nm##_property, check_provider_cells_property, &nm##_provider, &phandle_references);
+
+WARNING_PROPERTY_PHANDLE_CELLS(clocks, "clocks", "#clock-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(cooling_device, "cooling-device", "#cooling-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(dmas, "dmas", "#dma-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(hwlocks, "hwlocks", "#hwlock-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(interrupts_extended, "interrupts-extended", "#interrupt-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(io_channels, "io-channels", "#io-channel-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(iommus, "iommus", "#iommu-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(mboxes, "mboxes", "#mbox-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(msi_parent, "msi-parent", "#msi-cells", true);
+WARNING_PROPERTY_PHANDLE_CELLS(mux_controls, "mux-controls", "#mux-control-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(phys, "phys", "#phy-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(power_domains, "power-domains", "#power-domain-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(pwms, "pwms", "#pwm-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(resets, "resets", "#reset-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(sound_dais, "sound-dais", "#sound-dai-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(thermal_sensors, "thermal-sensors", "#thermal-sensor-cells");
+
+static bool prop_is_gpio(struct property *prop)
+{
+	char *str;
+
+	/*
+	 * *-gpios and *-gpio can appear in property names,
+	 * so skip over any false matches (only one known ATM)
+	 */
+	if (strstr(prop->name, "nr-gpio"))
+		return false;
+
+	str = strrchr(prop->name, '-');
+	if (str)
+		str++;
+	else
+		str = prop->name;
+	if (!(streq(str, "gpios") || streq(str, "gpio")))
+		return false;
+
+	return true;
+}
+
+static void check_gpios_property(struct check *c,
+					  struct dt_info *dti,
+				          struct node *node)
+{
+	struct property *prop;
+
+	/* Skip GPIO hog nodes which have 'gpios' property */
+	if (get_property(node, "gpio-hog"))
+		return;
+
+	for_each_property(node, prop) {
+		struct provider provider;
+
+		if (!prop_is_gpio(prop))
+			continue;
+
+		provider.prop_name = prop->name;
+		provider.cell_name = "#gpio-cells";
+		provider.optional = false;
+		check_property_phandle_args(c, dti, node, prop, &provider);
+	}
+
+}
+WARNING(gpios_property, check_gpios_property, NULL, &phandle_references);
+
+static void check_deprecated_gpio_property(struct check *c,
+					   struct dt_info *dti,
+				           struct node *node)
+{
+	struct property *prop;
+
+	for_each_property(node, prop) {
+		char *str;
+
+		if (!prop_is_gpio(prop))
+			continue;
+
+		str = strstr(prop->name, "gpio");
+		if (!streq(str, "gpio"))
+			continue;
+
+		FAIL(c, dti, "'[*-]gpio' is deprecated, use '[*-]gpios' instead for %s:%s",
+		     node->fullpath, prop->name);
+	}
+
+}
+CHECK(deprecated_gpio_property, check_deprecated_gpio_property, NULL);
+
+static bool node_is_interrupt_provider(struct node *node)
+{
+	struct property *prop;
+
+	prop = get_property(node, "interrupt-controller");
+	if (prop)
+		return true;
+
+	prop = get_property(node, "interrupt-map");
+	if (prop)
+		return true;
+
+	return false;
+}
+static void check_interrupts_property(struct check *c,
+				      struct dt_info *dti,
+				      struct node *node)
+{
+	struct node *root = dti->dt;
+	struct node *irq_node = NULL, *parent = node;
+	struct property *irq_prop, *prop = NULL;
+	int irq_cells, phandle;
+
+	irq_prop = get_property(node, "interrupts");
+	if (!irq_prop)
+		return;
+
+	if (irq_prop->val.len % sizeof(cell_t))
+		FAIL(c, dti, "property '%s' size (%d) is invalid, expected multiple of %zu in node %s",
+		     irq_prop->name, irq_prop->val.len, sizeof(cell_t),
+		     node->fullpath);
+
+	while (parent && !prop) {
+		if (parent != node && node_is_interrupt_provider(parent)) {
+			irq_node = parent;
+			break;
+		}
+
+		prop = get_property(parent, "interrupt-parent");
+		if (prop) {
+			phandle = propval_cell(prop);
+			/* Give up if this is an overlay with external references */
+			if ((phandle == 0 || phandle == -1) &&
+			    (dti->dtsflags & DTSF_PLUGIN))
+					return;
+
+			irq_node = get_node_by_phandle(root, phandle);
+			if (!irq_node) {
+				FAIL(c, dti, "Bad interrupt-parent phandle for %s",
+				     node->fullpath);
+				return;
+			}
+			if (!node_is_interrupt_provider(irq_node))
+				FAIL(c, dti,
+				     "Missing interrupt-controller or interrupt-map property in %s",
+				     irq_node->fullpath);
+
+			break;
+		}
+
+		parent = parent->parent;
+	}
+
+	if (!irq_node) {
+		FAIL(c, dti, "Missing interrupt-parent for %s", node->fullpath);
+		return;
+	}
+
+	prop = get_property(irq_node, "#interrupt-cells");
+	if (!prop) {
+		FAIL(c, dti, "Missing #interrupt-cells in interrupt-parent %s",
+		     irq_node->fullpath);
+		return;
+	}
+
+	irq_cells = propval_cell(prop);
+	if (irq_prop->val.len % (irq_cells * sizeof(cell_t))) {
+		FAIL(c, dti,
+		     "interrupts size is (%d), expected multiple of %d in %s",
+		     irq_prop->val.len, (int)(irq_cells * sizeof(cell_t)),
+		     node->fullpath);
+	}
+}
+WARNING(interrupts_property, check_interrupts_property, &phandle_references);
+
 static struct check *check_table[] = {
 	&duplicate_node_names, &duplicate_property_names,
 	&node_name_chars, &node_name_format, &property_name_chars,
@@ -987,6 +1255,27 @@ static struct check *check_table[] = {
 	&avoid_default_addr_size,
 	&obsolete_chosen_interrupt_controller,
 
+	&clocks_property,
+	&cooling_device_property,
+	&dmas_property,
+	&hwlocks_property,
+	&interrupts_extended_property,
+	&io_channels_property,
+	&iommus_property,
+	&mboxes_property,
+	&msi_parent_property,
+	&mux_controls_property,
+	&phys_property,
+	&power_domains_property,
+	&pwms_property,
+	&resets_property,
+	&sound_dais_property,
+	&thermal_sensors_property,
+
+	&deprecated_gpio_property,
+	&gpios_property,
+	&interrupts_property,
+
 	&always_fail,
 };
 
diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped
index 64c243772398..011bb9632ff2 100644
--- a/scripts/dtc/dtc-lexer.lex.c_shipped
+++ b/scripts/dtc/dtc-lexer.lex.c_shipped
@@ -1397,7 +1397,7 @@ static int yy_get_next_buffer (void)
 {
     	char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
 	char *source = (yytext_ptr);
-	yy_size_t number_to_move, i;
+	int number_to_move, i;
 	int ret_val;
 
 	if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
@@ -1426,7 +1426,7 @@ static int yy_get_next_buffer (void)
 	/* Try to read more data. */
 
 	/* First move last chars to start of buffer. */
-	number_to_move = (yy_size_t) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+	number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1);
 
 	for ( i = 0; i < number_to_move; ++i )
 		*(dest++) = *(source++);
@@ -1508,7 +1508,7 @@ static int yy_get_next_buffer (void)
 	else
 		ret_val = EOB_ACT_CONTINUE_SCAN;
 
-	if ((int) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+	if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
 		/* Extend the array by 50%, plus the number we really need. */
 		int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
 		YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size  );
@@ -1987,10 +1987,10 @@ YY_BUFFER_STATE yy_scan_bytes  (yyconst char * yybytes, int  _yybytes_len )
 	YY_BUFFER_STATE b;
 	char *buf;
 	yy_size_t n;
-	yy_size_t i;
+	int i;
     
 	/* Get memory for full buffer, including space for trailing EOB's. */
-	n = (yy_size_t) _yybytes_len + 2;
+	n = (yy_size_t) (_yybytes_len + 2);
 	buf = (char *) yyalloc(n  );
 	if ( ! buf )
 		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
diff --git a/scripts/dtc/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped
index 0a7a5ed86f04..aea514fa6928 100644
--- a/scripts/dtc/dtc-parser.tab.c_shipped
+++ b/scripts/dtc/dtc-parser.tab.c_shipped
@@ -448,7 +448,7 @@ union yyalloc
 /* YYNNTS -- Number of nonterminals.  */
 #define YYNNTS  30
 /* YYNRULES -- Number of rules.  */
-#define YYNRULES  84
+#define YYNRULES  85
 /* YYNSTATES -- Number of states.  */
 #define YYNSTATES  149
 
@@ -499,14 +499,14 @@ static const yytype_uint8 yytranslate[] =
 static const yytype_uint16 yyrline[] =
 {
        0,   109,   109,   117,   121,   128,   129,   139,   142,   149,
-     153,   161,   165,   170,   181,   191,   206,   214,   217,   224,
-     228,   232,   236,   244,   248,   252,   256,   260,   276,   286,
-     294,   297,   301,   308,   324,   329,   348,   362,   369,   370,
-     371,   378,   382,   383,   387,   388,   392,   393,   397,   398,
-     402,   403,   407,   408,   412,   413,   414,   418,   419,   420,
-     421,   422,   426,   427,   428,   432,   433,   434,   438,   439,
-     448,   457,   461,   462,   463,   464,   469,   472,   476,   484,
-     487,   491,   499,   503,   507
+     153,   161,   165,   170,   181,   200,   213,   220,   228,   231,
+     238,   242,   246,   250,   258,   262,   266,   270,   274,   290,
+     300,   308,   311,   315,   322,   338,   343,   362,   376,   383,
+     384,   385,   392,   396,   397,   401,   402,   406,   407,   411,
+     412,   416,   417,   421,   422,   426,   427,   428,   432,   433,
+     434,   435,   436,   440,   441,   442,   446,   447,   448,   452,
+     453,   462,   471,   475,   476,   477,   478,   483,   486,   490,
+     498,   501,   505,   513,   517,   521
 };
 #endif
 
@@ -582,20 +582,20 @@ static const yytype_int8 yypact[] =
 static const yytype_uint8 yydefact[] =
 {
        0,     0,     0,     5,     7,     3,     1,     6,     0,     0,
-       0,     7,     0,    38,    39,     0,     0,    10,     0,     2,
-       8,     4,     0,     0,     0,    72,     0,    41,    42,    44,
-      46,    48,    50,    52,    54,    57,    64,    67,    71,     0,
-      17,    11,     0,     0,     0,     0,    73,    74,    75,    40,
+      16,     7,     0,    39,    40,     0,     0,    10,     0,     2,
+       8,     4,     0,     0,     0,    73,     0,    42,    43,    45,
+      47,    49,    51,    53,    55,    58,    65,    68,    72,     0,
+      18,    11,     0,     0,     0,     0,    74,    75,    76,    41,
        0,     0,     0,     0,     0,     0,     0,     0,     0,     0,
        0,     0,     0,     0,     0,     0,     0,     0,     0,     9,
-      79,     0,     0,    14,    12,    45,     0,    47,    49,    51,
-      53,    55,    56,    60,    61,    59,    58,    62,    63,    65,
-      66,    69,    68,    70,     0,     0,     0,     0,    18,     0,
-      79,    15,    13,     0,     0,     0,    20,    30,    82,    22,
-      84,     0,    81,    80,    43,    21,    83,     0,     0,    16,
-      29,    19,    31,     0,    23,    32,    26,     0,    76,    34,
-       0,     0,     0,     0,    37,    36,    24,    35,    33,     0,
-      77,    78,    25,     0,    28,     0,     0,     0,    27
+      80,     0,     0,    14,    12,    46,     0,    48,    50,    52,
+      54,    56,    57,    61,    62,    60,    59,    63,    64,    66,
+      67,    70,    69,    71,     0,     0,     0,     0,    19,     0,
+      80,    15,    13,     0,     0,     0,    21,    31,    83,    23,
+      85,     0,    82,    81,    44,    22,    84,     0,     0,    17,
+      30,    20,    32,     0,    24,    33,    27,     0,    77,    35,
+       0,     0,     0,     0,    38,    37,    25,    36,    34,     0,
+      78,    79,    26,     0,    29,     0,     0,     0,    28
 };
 
   /* YYPGOTO[NTERM-NUM].  */
@@ -678,28 +678,28 @@ static const yytype_uint8 yystos[] =
 static const yytype_uint8 yyr1[] =
 {
        0,    48,    49,    50,    50,    51,    51,    52,    52,    53,
-      53,    54,    54,    54,    54,    54,    55,    56,    56,    57,
-      57,    57,    57,    58,    58,    58,    58,    58,    58,    58,
-      59,    59,    59,    60,    60,    60,    60,    60,    61,    61,
-      61,    62,    63,    63,    64,    64,    65,    65,    66,    66,
-      67,    67,    68,    68,    69,    69,    69,    70,    70,    70,
-      70,    70,    71,    71,    71,    72,    72,    72,    73,    73,
-      73,    73,    74,    74,    74,    74,    75,    75,    75,    76,
-      76,    76,    77,    77,    77
+      53,    54,    54,    54,    54,    54,    54,    55,    56,    56,
+      57,    57,    57,    57,    58,    58,    58,    58,    58,    58,
+      58,    59,    59,    59,    60,    60,    60,    60,    60,    61,
+      61,    61,    62,    63,    63,    64,    64,    65,    65,    66,
+      66,    67,    67,    68,    68,    69,    69,    69,    70,    70,
+      70,    70,    70,    71,    71,    71,    72,    72,    72,    73,
+      73,    73,    73,    74,    74,    74,    74,    75,    75,    75,
+      76,    76,    76,    77,    77,    77
 };
 
   /* YYR2[YYN] -- Number of symbols on the right hand side of rule YYN.  */
 static const yytype_uint8 yyr2[] =
 {
        0,     2,     3,     2,     4,     1,     2,     0,     2,     4,
-       2,     2,     3,     4,     3,     4,     5,     0,     2,     4,
-       2,     3,     2,     2,     3,     4,     2,     9,     5,     2,
-       0,     2,     2,     3,     1,     2,     2,     2,     1,     1,
-       3,     1,     1,     5,     1,     3,     1,     3,     1,     3,
-       1,     3,     1,     3,     1,     3,     3,     1,     3,     3,
-       3,     3,     3,     3,     1,     3,     3,     1,     3,     3,
-       3,     1,     1,     2,     2,     2,     0,     2,     2,     0,
-       2,     2,     2,     3,     2
+       2,     2,     3,     4,     3,     4,     0,     5,     0,     2,
+       4,     2,     3,     2,     2,     3,     4,     2,     9,     5,
+       2,     0,     2,     2,     3,     1,     2,     2,     2,     1,
+       1,     3,     1,     1,     5,     1,     3,     1,     3,     1,
+       3,     1,     3,     1,     3,     1,     3,     3,     1,     3,
+       3,     3,     3,     3,     3,     1,     3,     3,     1,     3,
+       3,     3,     1,     1,     2,     2,     2,     0,     2,     2,
+       0,     2,     2,     2,     3,     2
 };
 
 
@@ -1572,17 +1572,26 @@ yyreduce:
     {
 			struct node *target = get_node_by_ref((yyvsp[-2].node), (yyvsp[-1].labelref));
 
-			if (target)
+			if (target) {
 				merge_nodes(target, (yyvsp[0].node));
-			else
-				ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref));
+			} else {
+				/*
+				 * We rely on the rule being always:
+				 *   versioninfo plugindecl memreserves devicetree
+				 * so $-1 is what we want (plugindecl)
+				 */
+				if ((yyvsp[(-1) - (3)].flags) & DTSF_PLUGIN)
+					add_orphan_node((yyvsp[-2].node), (yyvsp[0].node), (yyvsp[-1].labelref));
+				else
+					ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref));
+			}
 			(yyval.node) = (yyvsp[-2].node);
 		}
-#line 1582 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1591 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 15:
-#line 192 "dtc-parser.y" /* yacc.c:1646  */
+#line 201 "dtc-parser.y" /* yacc.c:1646  */
     {
 			struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref));
 
@@ -1594,100 +1603,109 @@ yyreduce:
 
 			(yyval.node) = (yyvsp[-3].node);
 		}
-#line 1598 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1607 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 16:
-#line 207 "dtc-parser.y" /* yacc.c:1646  */
+#line 213 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.node) = build_node((yyvsp[-3].proplist), (yyvsp[-2].nodelist));
+			/* build empty node */
+			(yyval.node) = name_node(build_node(NULL, NULL), "");
 		}
-#line 1606 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1616 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 17:
-#line 214 "dtc-parser.y" /* yacc.c:1646  */
+#line 221 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.proplist) = NULL;
+			(yyval.node) = build_node((yyvsp[-3].proplist), (yyvsp[-2].nodelist));
 		}
-#line 1614 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1624 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 18:
-#line 218 "dtc-parser.y" /* yacc.c:1646  */
+#line 228 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.proplist) = chain_property((yyvsp[0].prop), (yyvsp[-1].proplist));
+			(yyval.proplist) = NULL;
 		}
-#line 1622 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1632 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 19:
-#line 225 "dtc-parser.y" /* yacc.c:1646  */
+#line 232 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.prop) = build_property((yyvsp[-3].propnodename), (yyvsp[-1].data));
+			(yyval.proplist) = chain_property((yyvsp[0].prop), (yyvsp[-1].proplist));
 		}
-#line 1630 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1640 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 20:
-#line 229 "dtc-parser.y" /* yacc.c:1646  */
+#line 239 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.prop) = build_property((yyvsp[-1].propnodename), empty_data);
+			(yyval.prop) = build_property((yyvsp[-3].propnodename), (yyvsp[-1].data));
 		}
-#line 1638 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1648 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 21:
-#line 233 "dtc-parser.y" /* yacc.c:1646  */
+#line 243 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.prop) = build_property_delete((yyvsp[-1].propnodename));
+			(yyval.prop) = build_property((yyvsp[-1].propnodename), empty_data);
 		}
-#line 1646 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1656 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 22:
-#line 237 "dtc-parser.y" /* yacc.c:1646  */
+#line 247 "dtc-parser.y" /* yacc.c:1646  */
+    {
+			(yyval.prop) = build_property_delete((yyvsp[-1].propnodename));
+		}
+#line 1664 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 23:
+#line 251 "dtc-parser.y" /* yacc.c:1646  */
     {
 			add_label(&(yyvsp[0].prop)->labels, (yyvsp[-1].labelref));
 			(yyval.prop) = (yyvsp[0].prop);
 		}
-#line 1655 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 23:
-#line 245 "dtc-parser.y" /* yacc.c:1646  */
-    {
-			(yyval.data) = data_merge((yyvsp[-1].data), (yyvsp[0].data));
-		}
-#line 1663 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1673 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 24:
-#line 249 "dtc-parser.y" /* yacc.c:1646  */
+#line 259 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.data) = data_merge((yyvsp[-2].data), (yyvsp[-1].array).data);
+			(yyval.data) = data_merge((yyvsp[-1].data), (yyvsp[0].data));
 		}
-#line 1671 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1681 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 25:
-#line 253 "dtc-parser.y" /* yacc.c:1646  */
+#line 263 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.data) = data_merge((yyvsp[-3].data), (yyvsp[-1].data));
+			(yyval.data) = data_merge((yyvsp[-2].data), (yyvsp[-1].array).data);
 		}
-#line 1679 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1689 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 26:
-#line 257 "dtc-parser.y" /* yacc.c:1646  */
+#line 267 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.data) = data_add_marker((yyvsp[-1].data), REF_PATH, (yyvsp[0].labelref));
+			(yyval.data) = data_merge((yyvsp[-3].data), (yyvsp[-1].data));
 		}
-#line 1687 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1697 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 27:
-#line 261 "dtc-parser.y" /* yacc.c:1646  */
+#line 271 "dtc-parser.y" /* yacc.c:1646  */
+    {
+			(yyval.data) = data_add_marker((yyvsp[-1].data), REF_PATH, (yyvsp[0].labelref));
+		}
+#line 1705 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 28:
+#line 275 "dtc-parser.y" /* yacc.c:1646  */
     {
 			FILE *f = srcfile_relative_open((yyvsp[-5].data).val, NULL);
 			struct data d;
@@ -1703,11 +1721,11 @@ yyreduce:
 			(yyval.data) = data_merge((yyvsp[-8].data), d);
 			fclose(f);
 		}
-#line 1707 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1725 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 28:
-#line 277 "dtc-parser.y" /* yacc.c:1646  */
+  case 29:
+#line 291 "dtc-parser.y" /* yacc.c:1646  */
     {
 			FILE *f = srcfile_relative_open((yyvsp[-1].data).val, NULL);
 			struct data d = empty_data;
@@ -1717,43 +1735,43 @@ yyreduce:
 			(yyval.data) = data_merge((yyvsp[-4].data), d);
 			fclose(f);
 		}
-#line 1721 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 29:
-#line 287 "dtc-parser.y" /* yacc.c:1646  */
-    {
-			(yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref));
-		}
-#line 1729 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1739 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 30:
-#line 294 "dtc-parser.y" /* yacc.c:1646  */
-    {
-			(yyval.data) = empty_data;
-		}
-#line 1737 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 31:
-#line 298 "dtc-parser.y" /* yacc.c:1646  */
-    {
-			(yyval.data) = (yyvsp[-1].data);
-		}
-#line 1745 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 32:
-#line 302 "dtc-parser.y" /* yacc.c:1646  */
+#line 301 "dtc-parser.y" /* yacc.c:1646  */
     {
 			(yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref));
 		}
-#line 1753 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1747 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 31:
+#line 308 "dtc-parser.y" /* yacc.c:1646  */
+    {
+			(yyval.data) = empty_data;
+		}
+#line 1755 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 32:
+#line 312 "dtc-parser.y" /* yacc.c:1646  */
+    {
+			(yyval.data) = (yyvsp[-1].data);
+		}
+#line 1763 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 33:
-#line 309 "dtc-parser.y" /* yacc.c:1646  */
+#line 316 "dtc-parser.y" /* yacc.c:1646  */
+    {
+			(yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref));
+		}
+#line 1771 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 34:
+#line 323 "dtc-parser.y" /* yacc.c:1646  */
     {
 			unsigned long long bits;
 
@@ -1769,20 +1787,20 @@ yyreduce:
 			(yyval.array).data = empty_data;
 			(yyval.array).bits = bits;
 		}
-#line 1773 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1791 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 34:
-#line 325 "dtc-parser.y" /* yacc.c:1646  */
+  case 35:
+#line 339 "dtc-parser.y" /* yacc.c:1646  */
     {
 			(yyval.array).data = empty_data;
 			(yyval.array).bits = 32;
 		}
-#line 1782 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1800 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 35:
-#line 330 "dtc-parser.y" /* yacc.c:1646  */
+  case 36:
+#line 344 "dtc-parser.y" /* yacc.c:1646  */
     {
 			if ((yyvsp[-1].array).bits < 64) {
 				uint64_t mask = (1ULL << (yyvsp[-1].array).bits) - 1;
@@ -1801,11 +1819,11 @@ yyreduce:
 
 			(yyval.array).data = data_append_integer((yyvsp[-1].array).data, (yyvsp[0].integer), (yyvsp[-1].array).bits);
 		}
-#line 1805 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1823 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 36:
-#line 349 "dtc-parser.y" /* yacc.c:1646  */
+  case 37:
+#line 363 "dtc-parser.y" /* yacc.c:1646  */
     {
 			uint64_t val = ~0ULL >> (64 - (yyvsp[-1].array).bits);
 
@@ -1819,129 +1837,129 @@ yyreduce:
 
 			(yyval.array).data = data_append_integer((yyvsp[-1].array).data, val, (yyvsp[-1].array).bits);
 		}
-#line 1823 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1841 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 37:
-#line 363 "dtc-parser.y" /* yacc.c:1646  */
+  case 38:
+#line 377 "dtc-parser.y" /* yacc.c:1646  */
     {
 			(yyval.array).data = data_add_marker((yyvsp[-1].array).data, LABEL, (yyvsp[0].labelref));
 		}
-#line 1831 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1849 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 40:
-#line 372 "dtc-parser.y" /* yacc.c:1646  */
+  case 41:
+#line 386 "dtc-parser.y" /* yacc.c:1646  */
     {
 			(yyval.integer) = (yyvsp[-1].integer);
 		}
-#line 1839 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 43:
-#line 383 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-4].integer) ? (yyvsp[-2].integer) : (yyvsp[0].integer); }
-#line 1845 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 45:
-#line 388 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) || (yyvsp[0].integer); }
-#line 1851 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 47:
-#line 393 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) && (yyvsp[0].integer); }
 #line 1857 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 49:
-#line 398 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) | (yyvsp[0].integer); }
+  case 44:
+#line 397 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-4].integer) ? (yyvsp[-2].integer) : (yyvsp[0].integer); }
 #line 1863 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 51:
-#line 403 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) ^ (yyvsp[0].integer); }
+  case 46:
+#line 402 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) || (yyvsp[0].integer); }
 #line 1869 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 53:
-#line 408 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) & (yyvsp[0].integer); }
+  case 48:
+#line 407 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) && (yyvsp[0].integer); }
 #line 1875 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 55:
-#line 413 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) == (yyvsp[0].integer); }
+  case 50:
+#line 412 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) | (yyvsp[0].integer); }
 #line 1881 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 56:
-#line 414 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) != (yyvsp[0].integer); }
+  case 52:
+#line 417 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) ^ (yyvsp[0].integer); }
 #line 1887 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 58:
-#line 419 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) < (yyvsp[0].integer); }
+  case 54:
+#line 422 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) & (yyvsp[0].integer); }
 #line 1893 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 59:
-#line 420 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) > (yyvsp[0].integer); }
+  case 56:
+#line 427 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) == (yyvsp[0].integer); }
 #line 1899 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 60:
-#line 421 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) <= (yyvsp[0].integer); }
+  case 57:
+#line 428 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) != (yyvsp[0].integer); }
 #line 1905 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 61:
-#line 422 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) >= (yyvsp[0].integer); }
+  case 59:
+#line 433 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) < (yyvsp[0].integer); }
 #line 1911 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 62:
-#line 426 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) << (yyvsp[0].integer); }
+  case 60:
+#line 434 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) > (yyvsp[0].integer); }
 #line 1917 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 63:
-#line 427 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) >> (yyvsp[0].integer); }
+  case 61:
+#line 435 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) <= (yyvsp[0].integer); }
 #line 1923 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 65:
-#line 432 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) + (yyvsp[0].integer); }
+  case 62:
+#line 436 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) >= (yyvsp[0].integer); }
 #line 1929 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 66:
-#line 433 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) - (yyvsp[0].integer); }
+  case 63:
+#line 440 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) << (yyvsp[0].integer); }
 #line 1935 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 68:
-#line 438 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = (yyvsp[-2].integer) * (yyvsp[0].integer); }
+  case 64:
+#line 441 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) >> (yyvsp[0].integer); }
 #line 1941 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
+  case 66:
+#line 446 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) + (yyvsp[0].integer); }
+#line 1947 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 67:
+#line 447 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) - (yyvsp[0].integer); }
+#line 1953 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
   case 69:
-#line 440 "dtc-parser.y" /* yacc.c:1646  */
+#line 452 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = (yyvsp[-2].integer) * (yyvsp[0].integer); }
+#line 1959 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 70:
+#line 454 "dtc-parser.y" /* yacc.c:1646  */
     {
 			if ((yyvsp[0].integer) != 0) {
 				(yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer);
@@ -1950,11 +1968,11 @@ yyreduce:
 				(yyval.integer) = 0;
 			}
 		}
-#line 1954 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 1972 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
-  case 70:
-#line 449 "dtc-parser.y" /* yacc.c:1646  */
+  case 71:
+#line 463 "dtc-parser.y" /* yacc.c:1646  */
     {
 			if ((yyvsp[0].integer) != 0) {
 				(yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer);
@@ -1963,103 +1981,103 @@ yyreduce:
 				(yyval.integer) = 0;
 			}
 		}
-#line 1967 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 73:
-#line 462 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = -(yyvsp[0].integer); }
-#line 1973 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 74:
-#line 463 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = ~(yyvsp[0].integer); }
-#line 1979 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 75:
-#line 464 "dtc-parser.y" /* yacc.c:1646  */
-    { (yyval.integer) = !(yyvsp[0].integer); }
 #line 1985 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
+  case 74:
+#line 476 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = -(yyvsp[0].integer); }
+#line 1991 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 75:
+#line 477 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = ~(yyvsp[0].integer); }
+#line 1997 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
   case 76:
-#line 469 "dtc-parser.y" /* yacc.c:1646  */
-    {
-			(yyval.data) = empty_data;
-		}
-#line 1993 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 478 "dtc-parser.y" /* yacc.c:1646  */
+    { (yyval.integer) = !(yyvsp[0].integer); }
+#line 2003 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 77:
-#line 473 "dtc-parser.y" /* yacc.c:1646  */
+#line 483 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.data) = data_append_byte((yyvsp[-1].data), (yyvsp[0].byte));
+			(yyval.data) = empty_data;
 		}
-#line 2001 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 2011 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 78:
-#line 477 "dtc-parser.y" /* yacc.c:1646  */
+#line 487 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref));
+			(yyval.data) = data_append_byte((yyvsp[-1].data), (yyvsp[0].byte));
 		}
-#line 2009 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 2019 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 79:
-#line 484 "dtc-parser.y" /* yacc.c:1646  */
+#line 491 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.nodelist) = NULL;
+			(yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref));
 		}
-#line 2017 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 2027 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 80:
-#line 488 "dtc-parser.y" /* yacc.c:1646  */
+#line 498 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.nodelist) = chain_node((yyvsp[-1].node), (yyvsp[0].nodelist));
+			(yyval.nodelist) = NULL;
 		}
-#line 2025 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 2035 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 81:
-#line 492 "dtc-parser.y" /* yacc.c:1646  */
+#line 502 "dtc-parser.y" /* yacc.c:1646  */
+    {
+			(yyval.nodelist) = chain_node((yyvsp[-1].node), (yyvsp[0].nodelist));
+		}
+#line 2043 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 82:
+#line 506 "dtc-parser.y" /* yacc.c:1646  */
     {
 			ERROR(&(yylsp[0]), "Properties must precede subnodes");
 			YYERROR;
 		}
-#line 2034 "dtc-parser.tab.c" /* yacc.c:1646  */
-    break;
-
-  case 82:
-#line 500 "dtc-parser.y" /* yacc.c:1646  */
-    {
-			(yyval.node) = name_node((yyvsp[0].node), (yyvsp[-1].propnodename));
-		}
-#line 2042 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 2052 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 83:
-#line 504 "dtc-parser.y" /* yacc.c:1646  */
+#line 514 "dtc-parser.y" /* yacc.c:1646  */
     {
-			(yyval.node) = name_node(build_node_delete(), (yyvsp[-1].propnodename));
+			(yyval.node) = name_node((yyvsp[0].node), (yyvsp[-1].propnodename));
 		}
-#line 2050 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 2060 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
   case 84:
-#line 508 "dtc-parser.y" /* yacc.c:1646  */
+#line 518 "dtc-parser.y" /* yacc.c:1646  */
+    {
+			(yyval.node) = name_node(build_node_delete(), (yyvsp[-1].propnodename));
+		}
+#line 2068 "dtc-parser.tab.c" /* yacc.c:1646  */
+    break;
+
+  case 85:
+#line 522 "dtc-parser.y" /* yacc.c:1646  */
     {
 			add_label(&(yyvsp[0].node)->labels, (yyvsp[-1].labelref));
 			(yyval.node) = (yyvsp[0].node);
 		}
-#line 2059 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 2077 "dtc-parser.tab.c" /* yacc.c:1646  */
     break;
 
 
-#line 2063 "dtc-parser.tab.c" /* yacc.c:1646  */
+#line 2081 "dtc-parser.tab.c" /* yacc.c:1646  */
       default: break;
     }
   /* User semantic actions sometimes alter yychar, and that requires
@@ -2294,7 +2312,7 @@ yyreturn:
 #endif
   return yyresult;
 }
-#line 514 "dtc-parser.y" /* yacc.c:1906  */
+#line 528 "dtc-parser.y" /* yacc.c:1906  */
 
 
 void yyerror(char const *s)
diff --git a/scripts/dtc/dtc-parser.y b/scripts/dtc/dtc-parser.y
index ca3f5003427c..affc81a8f9ab 100644
--- a/scripts/dtc/dtc-parser.y
+++ b/scripts/dtc/dtc-parser.y
@@ -182,10 +182,19 @@ devicetree:
 		{
 			struct node *target = get_node_by_ref($1, $2);
 
-			if (target)
+			if (target) {
 				merge_nodes(target, $3);
-			else
-				ERROR(&@2, "Label or path %s not found", $2);
+			} else {
+				/*
+				 * We rely on the rule being always:
+				 *   versioninfo plugindecl memreserves devicetree
+				 * so $-1 is what we want (plugindecl)
+				 */
+				if ($<flags>-1 & DTSF_PLUGIN)
+					add_orphan_node($1, $3, $2);
+				else
+					ERROR(&@2, "Label or path %s not found", $2);
+			}
 			$$ = $1;
 		}
 	| devicetree DT_DEL_NODE DT_REF ';'
@@ -200,6 +209,11 @@ devicetree:
 
 			$$ = $1;
 		}
+	| /* empty */
+		{
+			/* build empty node */
+			$$ = name_node(build_node(NULL, NULL), "");
+		}
 	;
 
 nodedef:
diff --git a/scripts/dtc/dtc.c b/scripts/dtc/dtc.c
index f5eed9d72c02..5ed873c72ad1 100644
--- a/scripts/dtc/dtc.c
+++ b/scripts/dtc/dtc.c
@@ -31,7 +31,7 @@ int reservenum;		/* Number of memory reservation slots */
 int minsize;		/* Minimum blob size */
 int padsize;		/* Additional padding to blob */
 int alignsize;		/* Additional padding to blob accroding to the alignsize */
-int phandle_format = PHANDLE_BOTH;	/* Use linux,phandle or phandle properties */
+int phandle_format = PHANDLE_EPAPR;	/* Use linux,phandle or phandle properties */
 int generate_symbols;	/* enable symbols & fixup support */
 int generate_fixups;		/* suppress generation of fixups on symbol support */
 int auto_label_aliases;		/* auto generate labels -> aliases */
diff --git a/scripts/dtc/dtc.h b/scripts/dtc/dtc.h
index fc24e17510fd..35cf926cc14a 100644
--- a/scripts/dtc/dtc.h
+++ b/scripts/dtc/dtc.h
@@ -31,6 +31,7 @@
 #include <ctype.h>
 #include <errno.h>
 #include <unistd.h>
+#include <inttypes.h>
 
 #include <libfdt_env.h>
 #include <fdt.h>
@@ -202,6 +203,7 @@ struct node *build_node_delete(void);
 struct node *name_node(struct node *node, char *name);
 struct node *chain_node(struct node *first, struct node *list);
 struct node *merge_nodes(struct node *old_node, struct node *new_node);
+void add_orphan_node(struct node *old_node, struct node *new_node, char *ref);
 
 void add_property(struct node *node, struct property *prop);
 void delete_property_by_name(struct node *node, char *name);
@@ -215,6 +217,7 @@ void append_to_property(struct node *node,
 const char *get_unitname(struct node *node);
 struct property *get_property(struct node *node, const char *propname);
 cell_t propval_cell(struct property *prop);
+cell_t propval_cell_n(struct property *prop, int n);
 struct property *get_property_by_label(struct node *tree, const char *label,
 				       struct node **node);
 struct marker *get_marker_label(struct node *tree, const char *label,
diff --git a/scripts/dtc/libfdt/fdt_addresses.c b/scripts/dtc/libfdt/fdt_addresses.c
new file mode 100644
index 000000000000..eff4dbcc729d
--- /dev/null
+++ b/scripts/dtc/libfdt/fdt_addresses.c
@@ -0,0 +1,96 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2014 David Gibson <david@gibson.dropbear.id.au>
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_address_cells(const void *fdt, int nodeoffset)
+{
+	const fdt32_t *ac;
+	int val;
+	int len;
+
+	ac = fdt_getprop(fdt, nodeoffset, "#address-cells", &len);
+	if (!ac)
+		return 2;
+
+	if (len != sizeof(*ac))
+		return -FDT_ERR_BADNCELLS;
+
+	val = fdt32_to_cpu(*ac);
+	if ((val <= 0) || (val > FDT_MAX_NCELLS))
+		return -FDT_ERR_BADNCELLS;
+
+	return val;
+}
+
+int fdt_size_cells(const void *fdt, int nodeoffset)
+{
+	const fdt32_t *sc;
+	int val;
+	int len;
+
+	sc = fdt_getprop(fdt, nodeoffset, "#size-cells", &len);
+	if (!sc)
+		return 2;
+
+	if (len != sizeof(*sc))
+		return -FDT_ERR_BADNCELLS;
+
+	val = fdt32_to_cpu(*sc);
+	if ((val < 0) || (val > FDT_MAX_NCELLS))
+		return -FDT_ERR_BADNCELLS;
+
+	return val;
+}
diff --git a/scripts/dtc/libfdt/fdt_empty_tree.c b/scripts/dtc/libfdt/fdt_empty_tree.c
index f72d13b1d19c..f2ae9b77c285 100644
--- a/scripts/dtc/libfdt/fdt_empty_tree.c
+++ b/scripts/dtc/libfdt/fdt_empty_tree.c
@@ -81,4 +81,3 @@ int fdt_create_empty_tree(void *buf, int bufsize)
 
 	return fdt_open_into(buf, buf, bufsize);
 }
-
diff --git a/scripts/dtc/libfdt/fdt_overlay.c b/scripts/dtc/libfdt/fdt_overlay.c
new file mode 100644
index 000000000000..bd81241e6658
--- /dev/null
+++ b/scripts/dtc/libfdt/fdt_overlay.c
@@ -0,0 +1,861 @@
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+/**
+ * overlay_get_target_phandle - retrieves the target phandle of a fragment
+ * @fdto: pointer to the device tree overlay blob
+ * @fragment: node offset of the fragment in the overlay
+ *
+ * overlay_get_target_phandle() retrieves the target phandle of an
+ * overlay fragment when that fragment uses a phandle (target
+ * property) instead of a path (target-path property).
+ *
+ * returns:
+ *      the phandle pointed by the target property
+ *      0, if the phandle was not found
+ *	-1, if the phandle was malformed
+ */
+static uint32_t overlay_get_target_phandle(const void *fdto, int fragment)
+{
+	const fdt32_t *val;
+	int len;
+
+	val = fdt_getprop(fdto, fragment, "target", &len);
+	if (!val)
+		return 0;
+
+	if ((len != sizeof(*val)) || (fdt32_to_cpu(*val) == (uint32_t)-1))
+		return (uint32_t)-1;
+
+	return fdt32_to_cpu(*val);
+}
+
+/**
+ * overlay_get_target - retrieves the offset of a fragment's target
+ * @fdt: Base device tree blob
+ * @fdto: Device tree overlay blob
+ * @fragment: node offset of the fragment in the overlay
+ * @pathp: pointer which receives the path of the target (or NULL)
+ *
+ * overlay_get_target() retrieves the target offset in the base
+ * device tree of a fragment, no matter how the actual targetting is
+ * done (through a phandle or a path)
+ *
+ * returns:
+ *      the targetted node offset in the base device tree
+ *      Negative error code on error
+ */
+static int overlay_get_target(const void *fdt, const void *fdto,
+			      int fragment, char const **pathp)
+{
+	uint32_t phandle;
+	const char *path = NULL;
+	int path_len = 0, ret;
+
+	/* Try first to do a phandle based lookup */
+	phandle = overlay_get_target_phandle(fdto, fragment);
+	if (phandle == (uint32_t)-1)
+		return -FDT_ERR_BADPHANDLE;
+
+	/* no phandle, try path */
+	if (!phandle) {
+		/* And then a path based lookup */
+		path = fdt_getprop(fdto, fragment, "target-path", &path_len);
+		if (path)
+			ret = fdt_path_offset(fdt, path);
+		else
+			ret = path_len;
+	} else
+		ret = fdt_node_offset_by_phandle(fdt, phandle);
+
+	/*
+	* If we haven't found either a target or a
+	* target-path property in a node that contains a
+	* __overlay__ subnode (we wouldn't be called
+	* otherwise), consider it a improperly written
+	* overlay
+	*/
+	if (ret < 0 && path_len == -FDT_ERR_NOTFOUND)
+		ret = -FDT_ERR_BADOVERLAY;
+
+	/* return on error */
+	if (ret < 0)
+		return ret;
+
+	/* return pointer to path (if available) */
+	if (pathp)
+		*pathp = path ? path : NULL;
+
+	return ret;
+}
+
+/**
+ * overlay_phandle_add_offset - Increases a phandle by an offset
+ * @fdt: Base device tree blob
+ * @node: Device tree overlay blob
+ * @name: Name of the property to modify (phandle or linux,phandle)
+ * @delta: offset to apply
+ *
+ * overlay_phandle_add_offset() increments a node phandle by a given
+ * offset.
+ *
+ * returns:
+ *      0 on success.
+ *      Negative error code on error
+ */
+static int overlay_phandle_add_offset(void *fdt, int node,
+				      const char *name, uint32_t delta)
+{
+	const fdt32_t *val;
+	uint32_t adj_val;
+	int len;
+
+	val = fdt_getprop(fdt, node, name, &len);
+	if (!val)
+		return len;
+
+	if (len != sizeof(*val))
+		return -FDT_ERR_BADPHANDLE;
+
+	adj_val = fdt32_to_cpu(*val);
+	if ((adj_val + delta) < adj_val)
+		return -FDT_ERR_NOPHANDLES;
+
+	adj_val += delta;
+	if (adj_val == (uint32_t)-1)
+		return -FDT_ERR_NOPHANDLES;
+
+	return fdt_setprop_inplace_u32(fdt, node, name, adj_val);
+}
+
+/**
+ * overlay_adjust_node_phandles - Offsets the phandles of a node
+ * @fdto: Device tree overlay blob
+ * @node: Offset of the node we want to adjust
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_adjust_node_phandles() adds a constant to all the phandles
+ * of a given node. This is mainly use as part of the overlay
+ * application process, when we want to update all the overlay
+ * phandles to not conflict with the overlays of the base device tree.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_adjust_node_phandles(void *fdto, int node,
+					uint32_t delta)
+{
+	int child;
+	int ret;
+
+	ret = overlay_phandle_add_offset(fdto, node, "phandle", delta);
+	if (ret && ret != -FDT_ERR_NOTFOUND)
+		return ret;
+
+	ret = overlay_phandle_add_offset(fdto, node, "linux,phandle", delta);
+	if (ret && ret != -FDT_ERR_NOTFOUND)
+		return ret;
+
+	fdt_for_each_subnode(child, fdto, node) {
+		ret = overlay_adjust_node_phandles(fdto, child, delta);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * overlay_adjust_local_phandles - Adjust the phandles of a whole overlay
+ * @fdto: Device tree overlay blob
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_adjust_local_phandles() adds a constant to all the
+ * phandles of an overlay. This is mainly use as part of the overlay
+ * application process, when we want to update all the overlay
+ * phandles to not conflict with the overlays of the base device tree.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_adjust_local_phandles(void *fdto, uint32_t delta)
+{
+	/*
+	 * Start adjusting the phandles from the overlay root
+	 */
+	return overlay_adjust_node_phandles(fdto, 0, delta);
+}
+
+/**
+ * overlay_update_local_node_references - Adjust the overlay references
+ * @fdto: Device tree overlay blob
+ * @tree_node: Node offset of the node to operate on
+ * @fixup_node: Node offset of the matching local fixups node
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_update_local_nodes_references() update the phandles
+ * pointing to a node within the device tree overlay by adding a
+ * constant delta.
+ *
+ * This is mainly used as part of a device tree application process,
+ * where you want the device tree overlays phandles to not conflict
+ * with the ones from the base device tree before merging them.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_update_local_node_references(void *fdto,
+						int tree_node,
+						int fixup_node,
+						uint32_t delta)
+{
+	int fixup_prop;
+	int fixup_child;
+	int ret;
+
+	fdt_for_each_property_offset(fixup_prop, fdto, fixup_node) {
+		const fdt32_t *fixup_val;
+		const char *tree_val;
+		const char *name;
+		int fixup_len;
+		int tree_len;
+		int i;
+
+		fixup_val = fdt_getprop_by_offset(fdto, fixup_prop,
+						  &name, &fixup_len);
+		if (!fixup_val)
+			return fixup_len;
+
+		if (fixup_len % sizeof(uint32_t))
+			return -FDT_ERR_BADOVERLAY;
+
+		tree_val = fdt_getprop(fdto, tree_node, name, &tree_len);
+		if (!tree_val) {
+			if (tree_len == -FDT_ERR_NOTFOUND)
+				return -FDT_ERR_BADOVERLAY;
+
+			return tree_len;
+		}
+
+		for (i = 0; i < (fixup_len / sizeof(uint32_t)); i++) {
+			fdt32_t adj_val;
+			uint32_t poffset;
+
+			poffset = fdt32_to_cpu(fixup_val[i]);
+
+			/*
+			 * phandles to fixup can be unaligned.
+			 *
+			 * Use a memcpy for the architectures that do
+			 * not support unaligned accesses.
+			 */
+			memcpy(&adj_val, tree_val + poffset, sizeof(adj_val));
+
+			adj_val = cpu_to_fdt32(fdt32_to_cpu(adj_val) + delta);
+
+			ret = fdt_setprop_inplace_namelen_partial(fdto,
+								  tree_node,
+								  name,
+								  strlen(name),
+								  poffset,
+								  &adj_val,
+								  sizeof(adj_val));
+			if (ret == -FDT_ERR_NOSPACE)
+				return -FDT_ERR_BADOVERLAY;
+
+			if (ret)
+				return ret;
+		}
+	}
+
+	fdt_for_each_subnode(fixup_child, fdto, fixup_node) {
+		const char *fixup_child_name = fdt_get_name(fdto, fixup_child,
+							    NULL);
+		int tree_child;
+
+		tree_child = fdt_subnode_offset(fdto, tree_node,
+						fixup_child_name);
+		if (tree_child == -FDT_ERR_NOTFOUND)
+			return -FDT_ERR_BADOVERLAY;
+		if (tree_child < 0)
+			return tree_child;
+
+		ret = overlay_update_local_node_references(fdto,
+							   tree_child,
+							   fixup_child,
+							   delta);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * overlay_update_local_references - Adjust the overlay references
+ * @fdto: Device tree overlay blob
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_update_local_references() update all the phandles pointing
+ * to a node within the device tree overlay by adding a constant
+ * delta to not conflict with the base overlay.
+ *
+ * This is mainly used as part of a device tree application process,
+ * where you want the device tree overlays phandles to not conflict
+ * with the ones from the base device tree before merging them.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_update_local_references(void *fdto, uint32_t delta)
+{
+	int fixups;
+
+	fixups = fdt_path_offset(fdto, "/__local_fixups__");
+	if (fixups < 0) {
+		/* There's no local phandles to adjust, bail out */
+		if (fixups == -FDT_ERR_NOTFOUND)
+			return 0;
+
+		return fixups;
+	}
+
+	/*
+	 * Update our local references from the root of the tree
+	 */
+	return overlay_update_local_node_references(fdto, 0, fixups,
+						    delta);
+}
+
+/**
+ * overlay_fixup_one_phandle - Set an overlay phandle to the base one
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ * @symbols_off: Node offset of the symbols node in the base device tree
+ * @path: Path to a node holding a phandle in the overlay
+ * @path_len: number of path characters to consider
+ * @name: Name of the property holding the phandle reference in the overlay
+ * @name_len: number of name characters to consider
+ * @poffset: Offset within the overlay property where the phandle is stored
+ * @label: Label of the node referenced by the phandle
+ *
+ * overlay_fixup_one_phandle() resolves an overlay phandle pointing to
+ * a node in the base device tree.
+ *
+ * This is part of the device tree overlay application process, when
+ * you want all the phandles in the overlay to point to the actual
+ * base dt nodes.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_fixup_one_phandle(void *fdt, void *fdto,
+				     int symbols_off,
+				     const char *path, uint32_t path_len,
+				     const char *name, uint32_t name_len,
+				     int poffset, const char *label)
+{
+	const char *symbol_path;
+	uint32_t phandle;
+	fdt32_t phandle_prop;
+	int symbol_off, fixup_off;
+	int prop_len;
+
+	if (symbols_off < 0)
+		return symbols_off;
+
+	symbol_path = fdt_getprop(fdt, symbols_off, label,
+				  &prop_len);
+	if (!symbol_path)
+		return prop_len;
+
+	symbol_off = fdt_path_offset(fdt, symbol_path);
+	if (symbol_off < 0)
+		return symbol_off;
+
+	phandle = fdt_get_phandle(fdt, symbol_off);
+	if (!phandle)
+		return -FDT_ERR_NOTFOUND;
+
+	fixup_off = fdt_path_offset_namelen(fdto, path, path_len);
+	if (fixup_off == -FDT_ERR_NOTFOUND)
+		return -FDT_ERR_BADOVERLAY;
+	if (fixup_off < 0)
+		return fixup_off;
+
+	phandle_prop = cpu_to_fdt32(phandle);
+	return fdt_setprop_inplace_namelen_partial(fdto, fixup_off,
+						   name, name_len, poffset,
+						   &phandle_prop,
+						   sizeof(phandle_prop));
+};
+
+/**
+ * overlay_fixup_phandle - Set an overlay phandle to the base one
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ * @symbols_off: Node offset of the symbols node in the base device tree
+ * @property: Property offset in the overlay holding the list of fixups
+ *
+ * overlay_fixup_phandle() resolves all the overlay phandles pointed
+ * to in a __fixups__ property, and updates them to match the phandles
+ * in use in the base device tree.
+ *
+ * This is part of the device tree overlay application process, when
+ * you want all the phandles in the overlay to point to the actual
+ * base dt nodes.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off,
+				 int property)
+{
+	const char *value;
+	const char *label;
+	int len;
+
+	value = fdt_getprop_by_offset(fdto, property,
+				      &label, &len);
+	if (!value) {
+		if (len == -FDT_ERR_NOTFOUND)
+			return -FDT_ERR_INTERNAL;
+
+		return len;
+	}
+
+	do {
+		const char *path, *name, *fixup_end;
+		const char *fixup_str = value;
+		uint32_t path_len, name_len;
+		uint32_t fixup_len;
+		char *sep, *endptr;
+		int poffset, ret;
+
+		fixup_end = memchr(value, '\0', len);
+		if (!fixup_end)
+			return -FDT_ERR_BADOVERLAY;
+		fixup_len = fixup_end - fixup_str;
+
+		len -= fixup_len + 1;
+		value += fixup_len + 1;
+
+		path = fixup_str;
+		sep = memchr(fixup_str, ':', fixup_len);
+		if (!sep || *sep != ':')
+			return -FDT_ERR_BADOVERLAY;
+
+		path_len = sep - path;
+		if (path_len == (fixup_len - 1))
+			return -FDT_ERR_BADOVERLAY;
+
+		fixup_len -= path_len + 1;
+		name = sep + 1;
+		sep = memchr(name, ':', fixup_len);
+		if (!sep || *sep != ':')
+			return -FDT_ERR_BADOVERLAY;
+
+		name_len = sep - name;
+		if (!name_len)
+			return -FDT_ERR_BADOVERLAY;
+
+		poffset = strtoul(sep + 1, &endptr, 10);
+		if ((*endptr != '\0') || (endptr <= (sep + 1)))
+			return -FDT_ERR_BADOVERLAY;
+
+		ret = overlay_fixup_one_phandle(fdt, fdto, symbols_off,
+						path, path_len, name, name_len,
+						poffset, label);
+		if (ret)
+			return ret;
+	} while (len > 0);
+
+	return 0;
+}
+
+/**
+ * overlay_fixup_phandles - Resolve the overlay phandles to the base
+ *                          device tree
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_fixup_phandles() resolves all the overlay phandles pointing
+ * to nodes in the base device tree.
+ *
+ * This is one of the steps of the device tree overlay application
+ * process, when you want all the phandles in the overlay to point to
+ * the actual base dt nodes.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_fixup_phandles(void *fdt, void *fdto)
+{
+	int fixups_off, symbols_off;
+	int property;
+
+	/* We can have overlays without any fixups */
+	fixups_off = fdt_path_offset(fdto, "/__fixups__");
+	if (fixups_off == -FDT_ERR_NOTFOUND)
+		return 0; /* nothing to do */
+	if (fixups_off < 0)
+		return fixups_off;
+
+	/* And base DTs without symbols */
+	symbols_off = fdt_path_offset(fdt, "/__symbols__");
+	if ((symbols_off < 0 && (symbols_off != -FDT_ERR_NOTFOUND)))
+		return symbols_off;
+
+	fdt_for_each_property_offset(property, fdto, fixups_off) {
+		int ret;
+
+		ret = overlay_fixup_phandle(fdt, fdto, symbols_off, property);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * overlay_apply_node - Merges a node into the base device tree
+ * @fdt: Base Device Tree blob
+ * @target: Node offset in the base device tree to apply the fragment to
+ * @fdto: Device tree overlay blob
+ * @node: Node offset in the overlay holding the changes to merge
+ *
+ * overlay_apply_node() merges a node into a target base device tree
+ * node pointed.
+ *
+ * This is part of the final step in the device tree overlay
+ * application process, when all the phandles have been adjusted and
+ * resolved and you just have to merge overlay into the base device
+ * tree.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_apply_node(void *fdt, int target,
+			      void *fdto, int node)
+{
+	int property;
+	int subnode;
+
+	fdt_for_each_property_offset(property, fdto, node) {
+		const char *name;
+		const void *prop;
+		int prop_len;
+		int ret;
+
+		prop = fdt_getprop_by_offset(fdto, property, &name,
+					     &prop_len);
+		if (prop_len == -FDT_ERR_NOTFOUND)
+			return -FDT_ERR_INTERNAL;
+		if (prop_len < 0)
+			return prop_len;
+
+		ret = fdt_setprop(fdt, target, name, prop, prop_len);
+		if (ret)
+			return ret;
+	}
+
+	fdt_for_each_subnode(subnode, fdto, node) {
+		const char *name = fdt_get_name(fdto, subnode, NULL);
+		int nnode;
+		int ret;
+
+		nnode = fdt_add_subnode(fdt, target, name);
+		if (nnode == -FDT_ERR_EXISTS) {
+			nnode = fdt_subnode_offset(fdt, target, name);
+			if (nnode == -FDT_ERR_NOTFOUND)
+				return -FDT_ERR_INTERNAL;
+		}
+
+		if (nnode < 0)
+			return nnode;
+
+		ret = overlay_apply_node(fdt, nnode, fdto, subnode);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * overlay_merge - Merge an overlay into its base device tree
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_merge() merges an overlay into its base device tree.
+ *
+ * This is the next to last step in the device tree overlay application
+ * process, when all the phandles have been adjusted and resolved and
+ * you just have to merge overlay into the base device tree.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_merge(void *fdt, void *fdto)
+{
+	int fragment;
+
+	fdt_for_each_subnode(fragment, fdto, 0) {
+		int overlay;
+		int target;
+		int ret;
+
+		/*
+		 * Each fragments will have an __overlay__ node. If
+		 * they don't, it's not supposed to be merged
+		 */
+		overlay = fdt_subnode_offset(fdto, fragment, "__overlay__");
+		if (overlay == -FDT_ERR_NOTFOUND)
+			continue;
+
+		if (overlay < 0)
+			return overlay;
+
+		target = overlay_get_target(fdt, fdto, fragment, NULL);
+		if (target < 0)
+			return target;
+
+		ret = overlay_apply_node(fdt, target, fdto, overlay);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int get_path_len(const void *fdt, int nodeoffset)
+{
+	int len = 0, namelen;
+	const char *name;
+
+	FDT_CHECK_HEADER(fdt);
+
+	for (;;) {
+		name = fdt_get_name(fdt, nodeoffset, &namelen);
+		if (!name)
+			return namelen;
+
+		/* root? we're done */
+		if (namelen == 0)
+			break;
+
+		nodeoffset = fdt_parent_offset(fdt, nodeoffset);
+		if (nodeoffset < 0)
+			return nodeoffset;
+		len += namelen + 1;
+	}
+
+	/* in case of root pretend it's "/" */
+	if (len == 0)
+		len++;
+	return len;
+}
+
+/**
+ * overlay_symbol_update - Update the symbols of base tree after a merge
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_symbol_update() updates the symbols of the base tree with the
+ * symbols of the applied overlay
+ *
+ * This is the last step in the device tree overlay application
+ * process, allowing the reference of overlay symbols by subsequent
+ * overlay operations.
+ *
+ * returns:
+ *      0 on success
+ *      Negative error code on failure
+ */
+static int overlay_symbol_update(void *fdt, void *fdto)
+{
+	int root_sym, ov_sym, prop, path_len, fragment, target;
+	int len, frag_name_len, ret, rel_path_len;
+	const char *s, *e;
+	const char *path;
+	const char *name;
+	const char *frag_name;
+	const char *rel_path;
+	const char *target_path;
+	char *buf;
+	void *p;
+
+	ov_sym = fdt_subnode_offset(fdto, 0, "__symbols__");
+
+	/* if no overlay symbols exist no problem */
+	if (ov_sym < 0)
+		return 0;
+
+	root_sym = fdt_subnode_offset(fdt, 0, "__symbols__");
+
+	/* it no root symbols exist we should create them */
+	if (root_sym == -FDT_ERR_NOTFOUND)
+		root_sym = fdt_add_subnode(fdt, 0, "__symbols__");
+
+	/* any error is fatal now */
+	if (root_sym < 0)
+		return root_sym;
+
+	/* iterate over each overlay symbol */
+	fdt_for_each_property_offset(prop, fdto, ov_sym) {
+		path = fdt_getprop_by_offset(fdto, prop, &name, &path_len);
+		if (!path)
+			return path_len;
+
+		/* verify it's a string property (terminated by a single \0) */
+		if (path_len < 1 || memchr(path, '\0', path_len) != &path[path_len - 1])
+			return -FDT_ERR_BADVALUE;
+
+		/* keep end marker to avoid strlen() */
+		e = path + path_len;
+
+		/* format: /<fragment-name>/__overlay__/<relative-subnode-path> */
+
+		if (*path != '/')
+			return -FDT_ERR_BADVALUE;
+
+		/* get fragment name first */
+		s = strchr(path + 1, '/');
+		if (!s)
+			return -FDT_ERR_BADOVERLAY;
+
+		frag_name = path + 1;
+		frag_name_len = s - path - 1;
+
+		/* verify format; safe since "s" lies in \0 terminated prop */
+		len = sizeof("/__overlay__/") - 1;
+		if ((e - s) < len || memcmp(s, "/__overlay__/", len))
+			return -FDT_ERR_BADOVERLAY;
+
+		rel_path = s + len;
+		rel_path_len = e - rel_path;
+
+		/* find the fragment index in which the symbol lies */
+		ret = fdt_subnode_offset_namelen(fdto, 0, frag_name,
+					       frag_name_len);
+		/* not found? */
+		if (ret < 0)
+			return -FDT_ERR_BADOVERLAY;
+		fragment = ret;
+
+		/* an __overlay__ subnode must exist */
+		ret = fdt_subnode_offset(fdto, fragment, "__overlay__");
+		if (ret < 0)
+			return -FDT_ERR_BADOVERLAY;
+
+		/* get the target of the fragment */
+		ret = overlay_get_target(fdt, fdto, fragment, &target_path);
+		if (ret < 0)
+			return ret;
+		target = ret;
+
+		/* if we have a target path use */
+		if (!target_path) {
+			ret = get_path_len(fdt, target);
+			if (ret < 0)
+				return ret;
+			len = ret;
+		} else {
+			len = strlen(target_path);
+		}
+
+		ret = fdt_setprop_placeholder(fdt, root_sym, name,
+				len + (len > 1) + rel_path_len + 1, &p);
+		if (ret < 0)
+			return ret;
+
+		if (!target_path) {
+			/* again in case setprop_placeholder changed it */
+			ret = overlay_get_target(fdt, fdto, fragment, &target_path);
+			if (ret < 0)
+				return ret;
+			target = ret;
+		}
+
+		buf = p;
+		if (len > 1) { /* target is not root */
+			if (!target_path) {
+				ret = fdt_get_path(fdt, target, buf, len + 1);
+				if (ret < 0)
+					return ret;
+			} else
+				memcpy(buf, target_path, len + 1);
+
+		} else
+			len--;
+
+		buf[len] = '/';
+		memcpy(buf + len + 1, rel_path, rel_path_len);
+		buf[len + 1 + rel_path_len] = '\0';
+	}
+
+	return 0;
+}
+
+int fdt_overlay_apply(void *fdt, void *fdto)
+{
+	uint32_t delta = fdt_get_max_phandle(fdt);
+	int ret;
+
+	FDT_CHECK_HEADER(fdt);
+	FDT_CHECK_HEADER(fdto);
+
+	ret = overlay_adjust_local_phandles(fdto, delta);
+	if (ret)
+		goto err;
+
+	ret = overlay_update_local_references(fdto, delta);
+	if (ret)
+		goto err;
+
+	ret = overlay_fixup_phandles(fdt, fdto);
+	if (ret)
+		goto err;
+
+	ret = overlay_merge(fdt, fdto);
+	if (ret)
+		goto err;
+
+	ret = overlay_symbol_update(fdt, fdto);
+	if (ret)
+		goto err;
+
+	/*
+	 * The overlay has been damaged, erase its magic.
+	 */
+	fdt_set_magic(fdto, ~0);
+
+	return 0;
+
+err:
+	/*
+	 * The overlay might have been damaged, erase its magic.
+	 */
+	fdt_set_magic(fdto, ~0);
+
+	/*
+	 * The base device tree might have been damaged, erase its
+	 * magic.
+	 */
+	fdt_set_magic(fdt, ~0);
+
+	return ret;
+}
diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c
index 3d00d2eee0e3..08de2cce674d 100644
--- a/scripts/dtc/libfdt/fdt_ro.c
+++ b/scripts/dtc/libfdt/fdt_ro.c
@@ -60,7 +60,7 @@ static int _fdt_nodename_eq(const void *fdt, int offset,
 {
 	const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
 
-	if (! p)
+	if (!p)
 		/* short match */
 		return 0;
 
@@ -327,7 +327,7 @@ const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
 	const struct fdt_property *prop;
 
 	prop = fdt_get_property_namelen(fdt, nodeoffset, name, namelen, lenp);
-	if (! prop)
+	if (!prop)
 		return NULL;
 
 	return prop->data;
diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c
index 3fd5847377c9..5c3a2bb0bc6b 100644
--- a/scripts/dtc/libfdt/fdt_rw.c
+++ b/scripts/dtc/libfdt/fdt_rw.c
@@ -207,7 +207,7 @@ static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name,
 	int err;
 
 	*prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
-	if (! (*prop))
+	if (!*prop)
 		return oldlen;
 
 	if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
@@ -269,8 +269,8 @@ int fdt_set_name(void *fdt, int nodeoffset, const char *name)
 	return 0;
 }
 
-int fdt_setprop(void *fdt, int nodeoffset, const char *name,
-		const void *val, int len)
+int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
+			    int len, void **prop_data)
 {
 	struct fdt_property *prop;
 	int err;
@@ -283,8 +283,22 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name,
 	if (err)
 		return err;
 
+	*prop_data = prop->data;
+	return 0;
+}
+
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+		const void *val, int len)
+{
+	void *prop_data;
+	int err;
+
+	err = fdt_setprop_placeholder(fdt, nodeoffset, name, len, &prop_data);
+	if (err)
+		return err;
+
 	if (len)
-		memcpy(prop->data, val, len);
+		memcpy(prop_data, val, len);
 	return 0;
 }
 
@@ -323,7 +337,7 @@ int fdt_delprop(void *fdt, int nodeoffset, const char *name)
 	FDT_RW_CHECK_HEADER(fdt);
 
 	prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
-	if (! prop)
+	if (!prop)
 		return len;
 
 	proplen = sizeof(*prop) + FDT_TAGALIGN(len);
diff --git a/scripts/dtc/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c
index 6a804859fd0c..2bd15e7aef87 100644
--- a/scripts/dtc/libfdt/fdt_sw.c
+++ b/scripts/dtc/libfdt/fdt_sw.c
@@ -220,7 +220,7 @@ static int _fdt_find_add_string(void *fdt, const char *s)
 	return offset;
 }
 
-int fdt_property(void *fdt, const char *name, const void *val, int len)
+int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp)
 {
 	struct fdt_property *prop;
 	int nameoff;
@@ -238,7 +238,19 @@ int fdt_property(void *fdt, const char *name, const void *val, int len)
 	prop->tag = cpu_to_fdt32(FDT_PROP);
 	prop->nameoff = cpu_to_fdt32(nameoff);
 	prop->len = cpu_to_fdt32(len);
-	memcpy(prop->data, val, len);
+	*valp = prop->data;
+	return 0;
+}
+
+int fdt_property(void *fdt, const char *name, const void *val, int len)
+{
+	void *ptr;
+	int ret;
+
+	ret = fdt_property_placeholder(fdt, name, len, &ptr);
+	if (ret)
+		return ret;
+	memcpy(ptr, val, len);
 	return 0;
 }
 
diff --git a/scripts/dtc/libfdt/fdt_wip.c b/scripts/dtc/libfdt/fdt_wip.c
index 6aaab399929c..5e859198622b 100644
--- a/scripts/dtc/libfdt/fdt_wip.c
+++ b/scripts/dtc/libfdt/fdt_wip.c
@@ -82,7 +82,7 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
 	int proplen;
 
 	propval = fdt_getprop(fdt, nodeoffset, name, &proplen);
-	if (! propval)
+	if (!propval)
 		return proplen;
 
 	if (proplen != len)
@@ -107,7 +107,7 @@ int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
 	int len;
 
 	prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
-	if (! prop)
+	if (!prop)
 		return len;
 
 	_fdt_nop_region(prop, len + sizeof(*prop));
diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h
index ba86caa73d01..7f83023ee109 100644
--- a/scripts/dtc/libfdt/libfdt.h
+++ b/scripts/dtc/libfdt/libfdt.h
@@ -1314,6 +1314,22 @@ static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
 {
 	return fdt_property_u32(fdt, name, val);
 }
+
+/**
+ * fdt_property_placeholder - add a new property and return a ptr to its value
+ *
+ * @fdt: pointer to the device tree blob
+ * @name: name of property to add
+ * @len: length of property value in bytes
+ * @valp: returns a pointer to where where the value should be placed
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_NOSPACE, standard meanings
+ */
+int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp);
+
 #define fdt_property_string(fdt, name, str) \
 	fdt_property(fdt, name, str, strlen(str)+1)
 int fdt_end_node(void *fdt);
@@ -1432,6 +1448,37 @@ int fdt_set_name(void *fdt, int nodeoffset, const char *name);
 int fdt_setprop(void *fdt, int nodeoffset, const char *name,
 		const void *val, int len);
 
+/**
+ * fdt_setprop _placeholder - allocate space for a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @len: length of the property value
+ * @prop_data: return pointer to property data
+ *
+ * fdt_setprop_placeholer() allocates the named property in the given node.
+ * If the property exists it is resized. In either case a pointer to the
+ * property data is returned.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
+			    int len, void **prop_data);
+
 /**
  * fdt_setprop_u32 - set a property to a 32-bit integer
  * @fdt: pointer to the device tree blob
diff --git a/scripts/dtc/livetree.c b/scripts/dtc/livetree.c
index 3673de07e4e5..6846ad2fd6d2 100644
--- a/scripts/dtc/livetree.c
+++ b/scripts/dtc/livetree.c
@@ -216,6 +216,28 @@ struct node *merge_nodes(struct node *old_node, struct node *new_node)
 	return old_node;
 }
 
+void add_orphan_node(struct node *dt, struct node *new_node, char *ref)
+{
+	static unsigned int next_orphan_fragment = 0;
+	struct node *node;
+	struct property *p;
+	struct data d = empty_data;
+	char *name;
+
+	d = data_add_marker(d, REF_PHANDLE, ref);
+	d = data_append_integer(d, 0xffffffff, 32);
+
+	p = build_property("target", d);
+
+	xasprintf(&name, "fragment@%u",
+			next_orphan_fragment++);
+	name_node(new_node, "__overlay__");
+	node = build_node(p, new_node);
+	name_node(node, name);
+
+	add_child(dt, node);
+}
+
 struct node *chain_node(struct node *first, struct node *list)
 {
 	assert(first->next_sibling == NULL);
@@ -396,6 +418,12 @@ cell_t propval_cell(struct property *prop)
 	return fdt32_to_cpu(*((fdt32_t *)prop->val.val));
 }
 
+cell_t propval_cell_n(struct property *prop, int n)
+{
+	assert(prop->val.len / sizeof(cell_t) >= n);
+	return fdt32_to_cpu(*((fdt32_t *)prop->val.val + n));
+}
+
 struct property *get_property_by_label(struct node *tree, const char *label,
 				       struct node **node)
 {
@@ -478,7 +506,8 @@ struct node *get_node_by_path(struct node *tree, const char *path)
 	p = strchr(path, '/');
 
 	for_each_child(tree, child) {
-		if (p && strneq(path, child->name, p-path))
+		if (p && (strlen(child->name) == p-path) &&
+				strneq(path, child->name, p-path))
 			return get_node_by_path(child, p+1);
 		else if (!p && streq(path, child->name))
 			return child;
diff --git a/scripts/dtc/update-dtc-source.sh b/scripts/dtc/update-dtc-source.sh
index 62f0d5325fd3..fe8926bb3b54 100755
--- a/scripts/dtc/update-dtc-source.sh
+++ b/scripts/dtc/update-dtc-source.sh
@@ -35,7 +35,9 @@ DTC_SOURCE="checks.c data.c dtc.c dtc.h flattree.c fstree.c livetree.c srcpos.c
 		srcpos.h treesource.c util.c util.h version_gen.h Makefile.dtc \
 		dtc-lexer.l dtc-parser.y"
 DTC_GENERATED="dtc-lexer.lex.c dtc-parser.tab.c dtc-parser.tab.h"
-LIBFDT_SOURCE="Makefile.libfdt fdt.c fdt.h fdt_empty_tree.c fdt_ro.c fdt_rw.c fdt_strerror.c fdt_sw.c fdt_wip.c libfdt.h libfdt_env.h libfdt_internal.h"
+LIBFDT_SOURCE="Makefile.libfdt fdt.c fdt.h fdt_addresses.c fdt_empty_tree.c \
+		fdt_overlay.c fdt_ro.c fdt_rw.c fdt_strerror.c fdt_sw.c \
+		fdt_wip.c libfdt.h libfdt_env.h libfdt_internal.h"
 
 get_last_dtc_version() {
 	git log --oneline scripts/dtc/ | grep 'upstream' | head -1 | sed -e 's/^.* \(.*\)/\1/'
diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h
index 1229e07b4912..6a4e84798966 100644
--- a/scripts/dtc/version_gen.h
+++ b/scripts/dtc/version_gen.h
@@ -1 +1 @@
-#define DTC_VERSION "DTC 1.4.4-g756ffc4f"
+#define DTC_VERSION "DTC 1.4.5-gc1e55a55"