redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

MIPS: OCTEON: program rx/tx-delay always from DT 

Program rx/tx-delay always from DT.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
hifive-unleashed-5.1
Aaro Koskinen 2019-02-05 00:41:49 +02:00 committed by Paul Burton
parent 1836c2b246
commit 3d2521810e
No known key found for this signature in database
GPG Key ID: 3EA79FACB57500DD
6 changed files with 52 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
View File

@ -180,6 +180,8 @@
ethernet@0 {
phy-handle = <&phy2>;
cavium,alt-phy-handle = <&phy100>;
rx-delay = <0>;
tx-delay = <0>;
fixed-link {
speed = <1000>;
full-duplex;
@ -188,6 +190,8 @@
ethernet@1 {
phy-handle = <&phy3>;
cavium,alt-phy-handle = <&phy101>;
rx-delay = <0>;
tx-delay = <0>;
fixed-link {
speed = <1000>;
full-duplex;
@ -196,6 +200,8 @@
ethernet@2 {
phy-handle = <&phy4>;
cavium,alt-phy-handle = <&phy102>;
rx-delay = <0>;
tx-delay = <0>;
};
ethernet@3 {
compatible = "cavium,octeon-3860-pip-port";

6
arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
View File

@ -33,12 +33,18 @@
interface@0 {
ethernet@0 {
phy-handle = <&phy7>;
rx-delay = <0>;
tx-delay = <0x10>;
};
ethernet@1 {
phy-handle = <&phy6>;
rx-delay = <0>;
tx-delay = <0x10>;
};
ethernet@2 {
phy-handle = <&phy5>;
rx-delay = <0>;
tx-delay = <0x10>;
};
};
};

39
arch/mips/cavium-octeon/executive/cvmx-helper-board.c
View File

@ -320,45 +320,6 @@ int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
return supported_ports;
}
/**
* Enable packet input/output from the hardware. This function is
* called after by cvmx_helper_packet_hardware_enable() to
* perform board specific initialization. For most boards
* nothing is needed.
*
* @interface: Interface to enable
*
* Returns Zero on success, negative on failure
*/
int __cvmx_helper_board_hardware_enable(int interface)
{
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) {
if (interface == 0) {
/* Different config for switch port */
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
/*
* Boards with gigabit WAN ports need a
* different setting that is compatible with
* 100 Mbit settings
*/
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface),
0xc);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface),
0xc);
}
} else if (cvmx_sysinfo_get()->board_type ==
CVMX_BOARD_TYPE_UBNT_E100) {
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0);
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10);
}
return 0;
}
/**
* Get the clock type used for the USB block based on board type.
* Used by the USB code for auto configuration of clock type.

1
arch/mips/cavium-octeon/executive/cvmx-helper.c
View File

@ -762,7 +762,6 @@ static int __cvmx_helper_packet_hardware_enable(int interface)
result = __cvmx_helper_loop_enable(interface);
break;
}
result |= __cvmx_helper_board_hardware_enable(interface);
return result;
}

40
arch/mips/cavium-octeon/octeon-platform.c
View File

@ -603,6 +603,45 @@ static void __init octeon_fdt_rm_ethernet(int node)
fdt_nop_node(initial_boot_params, node);
}
static void __init _octeon_rx_tx_delay(int eth, int rx_delay, int tx_delay)
{
fdt_setprop_inplace_cell(initial_boot_params, eth, "rx-delay",
rx_delay);
fdt_setprop_inplace_cell(initial_boot_params, eth, "tx-delay",
tx_delay);
}
static void __init octeon_rx_tx_delay(int eth, int iface, int port)
{
switch (cvmx_sysinfo_get()->board_type) {
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
if (iface == 0) {
if (port == 0) {
/*
* Boards with gigabit WAN ports need a
* different setting that is compatible with
* 100 Mbit settings
*/
_octeon_rx_tx_delay(eth, 0xc, 0x0c);
return;
} else if (port == 1) {
/* Different config for switch port. */
_octeon_rx_tx_delay(eth, 0x0, 0x0);
return;
}
}
break;
case CVMX_BOARD_TYPE_UBNT_E100:
if (iface == 0 && port <= 2) {
_octeon_rx_tx_delay(eth, 0x0, 0x10);
return;
}
break;
}
fdt_nop_property(initial_boot_params, eth, "rx-delay");
fdt_nop_property(initial_boot_params, eth, "tx-delay");
}
static void __init octeon_fdt_pip_port(int iface, int i, int p, int max)
{
char name_buffer[20];
@ -633,6 +672,7 @@ static void __init octeon_fdt_pip_port(int iface, int i, int p, int max)
WARN_ON(octeon_has_fixed_link(ipd_port));
else if (!octeon_has_fixed_link(ipd_port))
fdt_nop_node(initial_boot_params, fixed_link);
octeon_rx_tx_delay(eth, i, p);
}
static void __init octeon_fdt_pip_iface(int pip, int idx)

12
arch/mips/include/asm/octeon/cvmx-helper-board.h
View File

@ -119,18 +119,6 @@ extern cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port);
extern int __cvmx_helper_board_interface_probe(int interface,
int supported_ports);
/**
* Enable packet input/output from the hardware. This function is
* called after by cvmx_helper_packet_hardware_enable() to
* perform board specific initialization. For most boards
* nothing is needed.
*
* @interface: Interface to enable
*
* Returns Zero on success, negative on failure
*/
extern int __cvmx_helper_board_hardware_enable(int interface);
enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void);
#endif /* __CVMX_HELPER_BOARD_H__ */