redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

wlcore/wl12xx: make sure session id is always zero for AP 

The 12xx FW doesn't support non-zero session ids for AP-mode. Introduce
an appropriate quirk to make sure the session id is always zero when
needed.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
hifive-unleashed-5.1
Arik Nemtsov 2012-11-30 00:50:06 +02:00 committed by Luciano Coelho
parent aaabee8b76
commit 3ea186d137
3 changed files with 15 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/net/wireless/ti/wl12xx/main.c
View File

@ -644,7 +644,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
WLCORE_QUIRK_DUAL_PROBE_TMPL |
WLCORE_QUIRK_TKIP_HEADER_SPACE |
WLCORE_QUIRK_START_STA_FAILS;
WLCORE_QUIRK_START_STA_FAILS |
WLCORE_QUIRK_AP_ZERO_SESSION_ID;
wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
wl->mr_fw_name = WL127X_FW_NAME_MULTI;
memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x,
@ -667,7 +668,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
WLCORE_QUIRK_DUAL_PROBE_TMPL |
WLCORE_QUIRK_TKIP_HEADER_SPACE |
WLCORE_QUIRK_START_STA_FAILS;
WLCORE_QUIRK_START_STA_FAILS |
WLCORE_QUIRK_AP_ZERO_SESSION_ID;
wl->plt_fw_name = WL127X_PLT_FW_NAME;
wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
wl->mr_fw_name = WL127X_FW_NAME_MULTI;
@ -695,7 +697,8 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
WLCORE_QUIRK_DUAL_PROBE_TMPL |
WLCORE_QUIRK_TKIP_HEADER_SPACE |
WLCORE_QUIRK_START_STA_FAILS;
WLCORE_QUIRK_START_STA_FAILS |
WLCORE_QUIRK_AP_ZERO_SESSION_ID;
wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER,
WL128X_IFTYPE_SR_VER, WL128X_MAJOR_SR_VER,

9
drivers/net/wireless/ti/wlcore/tx.c
View File

@ -293,9 +293,14 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct wl12xx_vif *wlvif,
tx_attr |= TX_HW_ATTR_TX_DUMMY_REQ;
} else if (wlvif) {
u8 session_id = wl->session_ids[hlid];
if ((wl->quirks & WLCORE_QUIRK_AP_ZERO_SESSION_ID) &&
(wlvif->bss_type == BSS_TYPE_AP_BSS))
session_id = 0;
/* configure the tx attributes */
tx_attr = wl->session_ids[hlid] <<
TX_HW_ATTR_OFST_SESSION_COUNTER;
tx_attr = session_id << TX_HW_ATTR_OFST_SESSION_COUNTER;
}
desc->hlid = hlid;

2
drivers/net/wireless/ti/wlcore/wlcore.h
View File

@ -533,6 +533,8 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip,
/* Firmware requires reg domain configuration for active calibration */
#define WLCORE_QUIRK_REGDOMAIN_CONF BIT(11)
/* The FW only support a zero session id for AP */
#define WLCORE_QUIRK_AP_ZERO_SESSION_ID BIT(12)
/* TODO: move all these common registers and values elsewhere */
#define HW_ACCESS_ELP_CTRL_REG 0x1FFFC