From 414002bc32790a012885b4054ef2e61f0bf41d09 Mon Sep 17 00:00:00 2001 From: Kamel Bouhara Date: Fri, 20 Dec 2019 11:38:35 +0100 Subject: [PATCH] ARM: dts: at91: add smartkiz support and a common kizboxmini dtsi file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Split the existing Kizbox Mini boards into three board configuration, the base board, the mother board and the RailDIN board. Add a new dts file for the SmartKiz board support. Signed-off-by: Kévin RAYMOND Signed-off-by: Mickael GARDET Signed-off-by: Kamel Bouhara Link: https://lore.kernel.org/r/20191220103835.160154-2-kamel.bouhara@bootlin.com Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/Makefile | 5 +- arch/arm/boot/dts/at91-kizboxmini-base.dts | 24 +++ ...oxmini.dts => at91-kizboxmini-common.dtsi} | 165 +++++++++--------- arch/arm/boot/dts/at91-kizboxmini-mb.dts | 26 +++ arch/arm/boot/dts/at91-kizboxmini-rd.dts | 49 ++++++ arch/arm/boot/dts/at91-smartkiz.dts | 109 ++++++++++++ 6 files changed, 294 insertions(+), 84 deletions(-) create mode 100644 arch/arm/boot/dts/at91-kizboxmini-base.dts rename arch/arm/boot/dts/{at91-kizboxmini.dts => at91-kizboxmini-common.dtsi} (51%) create mode 100644 arch/arm/boot/dts/at91-kizboxmini-mb.dts create mode 100644 arch/arm/boot/dts/at91-kizboxmini-rd.dts create mode 100644 arch/arm/boot/dts/at91-smartkiz.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 54d6e480e336..20096365f5d4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -37,7 +37,10 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-ariag25.dtb \ at91-ariettag25.dtb \ at91-cosino_mega2560.dtb \ - at91-kizboxmini.dtb \ + at91-kizboxmini-base.dtb \ + at91-kizboxmini-mb.dtb \ + at91-kizboxmini-rd.dtb \ + at91-smartkiz.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/at91-kizboxmini-base.dts new file mode 100644 index 000000000000..81c29ca5cc1b --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-base.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini + * base board + * + * Copyright (C) 2015 Overkiz SAS + * Author: Antoine Aubert + * Kévin Raymond + */ +/dts-v1/; +#include "at91-kizboxmini-common.dtsi" + +/ { + model = "Overkiz Kizbox Mini"; + compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; +}; + +&pinctrl_usart0 { + atmel,pins = + ; +}; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi similarity index 51% rename from arch/arm/boot/dts/at91-kizboxmini.dts rename to arch/arm/boot/dts/at91-kizboxmini-common.dtsi index cb22f5fb055f..fddf267b2d17 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi @@ -1,17 +1,16 @@ -// SPDX-License-Identifier: GPL-2.0-or-later +// SPDX-License-Identifier: GPL-2.0 /* * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board * - * Copyright (C) 2014 Gaël PORTAY + * Copyright (C) 2014-2018 Overkiz SAS + * Author: Antoine Aubert + * Gaël Portay + * Kévin Raymond + * Dorian Rocipon */ -/dts-v1/; #include "at91sam9g25.dtsi" -#include / { - model = "Overkiz Kizbox mini"; - compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9"; - chosen { bootargs = "ubi.mtd=ubi"; stdout-path = &dbgu; @@ -22,24 +21,16 @@ }; clocks { + main_xtal { + clock-frequency = <12000000>; + }; + slow_xtal { clock-frequency = <32768>; }; - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; - status = "okay"; + adc_op_clk { + status = "disabled"; }; }; @@ -63,17 +54,25 @@ }; }; - pwm_leds { + leds: pwm_leds { compatible = "pwm-leds"; - green { + led_blue: pwm_blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "none"; + status = "disabled"; + }; + + led_green: pwm_green { label = "pwm:green:user"; pwms = <&pwm0 0 10000000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - red { + led_red: pwm_red { label = "pwm:red:user"; pwms = <&pwm0 1 10000000 0>; max-brightness = <255>; @@ -82,53 +81,12 @@ }; }; -&dbgu { +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; -&ebi { - pinctrl-0 = <&pinctrl_ebi_addr_nand - &pinctrl_ebi_data_0_7>; - pinctrl-names = "default"; - status = "okay"; - - nand-controller { - pinctrl-0 = <&pinctrl_nand_oe_we - &pinctrl_nand_cs - &pinctrl_nand_rb>; - pinctrl-names = "default"; - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; - }; -}; - &macb0 { phy-mode = "rmii"; status = "okay"; @@ -137,26 +95,70 @@ &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_pwm0_1 - &pinctrl_pwm0_pwm1_1>; + &pinctrl_pwm0_pwm1_1 + &pinctrl_pwm0_pwm2_1>; status = "okay"; }; -&tcb0 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; +&dbgu { + status = "okay"; }; -&usart0 { +&watchdog { status = "okay"; }; +&adc0 { + status = "disabled"; +}; + +&rtc { + status = "disabled"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; +}; + &usb0 { num-ports = <1>; status = "okay"; @@ -166,6 +168,3 @@ status = "okay"; }; -&watchdog { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts new file mode 100644 index 000000000000..c07d3076a9bc --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2018 Overkiz SAS + * Author: Mickael Gardet + * Kévin Raymond + */ +/dts-v1/; +#include "at91-kizboxmini-common.dtsi" + +/ { + model = "Overkiz Kizbox Mini Mother Board"; + compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; +}; + +&usb0 { + num-ports = <2>; +}; + +&rtc { + status = "okay"; +}; + +&led_blue { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts new file mode 100644 index 000000000000..ab50f4d22387 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2018 Overkiz SAS + * Author: Mickael Gardet + * Kévin Raymond + */ +/dts-v1/; +#include "at91-kizboxmini-common.dtsi" + +/ { + model = "Overkiz Kizbox Mini RailDIN"; + compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; + + clocks { + adc_op_clk { + status = "okay"; + }; + }; +}; + +&pinctrl { + adc0 { + pinctrl_adc0_ad5: adc0_ad5-0 { + /* pull-up disable */ + atmel,pins = ; + }; + }; +}; + +&usart0 { + status = "disabled"; +}; + +&rtc { + status = "okay"; +}; + +&led_blue { + status = "okay"; +}; + +&adc0 { + atmel,adc-vref = <2500>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_ad5>; + atmel,adc-channels-used = <0x0020>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts new file mode 100644 index 000000000000..106f23ba4a3b --- /dev/null +++ b/arch/arm/boot/dts/at91-smartkiz.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017-2018 Overkiz SAS + * Author: Mickael Gardet + * Kévin Raymond + * Dorian Rocipon + */ +/dts-v1/; +#include "at91-kizboxmini-common.dtsi" + +/ { + model = "Overkiz SmartKiz"; + compatible = "overkiz,smartkiz", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; + + clocks { + adc_op_clk { + status = "okay"; + }; + }; + + aliases { + serial5 = &uart0; + }; + + pio_keys { + hk_reset { + label = "HK_RESET"; + gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + }; + + power_rf { + label = "POWER_RF"; + gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + }; + + power_wifi { + label = "POWER_WIFI"; + gpios = <&pioA 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + ; + }; + }; + + adc0 { + pinctrl_adc0_ad0: adc0_ad0-0 { + /* pull-up disable */ + atmel,pins = ; + }; + pinctrl_adc0_ad5: adc0_ad5-0 { + /* pull-up disable */ + atmel,pins = ; + }; + pinctrl_adc0_ad6: adc0_ad6-0 { + /* pull-up disable */ + atmel,pins = ; + }; + pinctrl_adc0_ad11: adc0_ad11-0 { + /* pull-up disable */ + atmel,pins = ; + }; + }; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +&macb0 { + status = "disabled"; +}; + +&rtc { + status = "okay"; +}; + +&leds { + blue { + status = "okay"; + }; +}; + +&adc0 { + atmel,adc-vref = <2500>; + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad11 + >; + atmel,adc-channels-used = <0x0861>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; +